Documents dont le département est "Département de génie mécanique"

A

Abda, M., Berthet, L., Hamedi, M., Hibatullah, D., Piollet, E., Blake, C., Blais, B., & Gosselin, F. (2026). The finite element neural network method to simulate two dimensional partial differential equations and perform parameter identification. Scientific Reports. Lien externe

Ali Bagheri, M. (octobre 2026). Un échafaudage plat et pliable inspiré de l'origami pour l'ostéogenèse par distraction [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

Ali Bagheri, M., Villemure, I., Aubin, C.-É., & Nault, M.-L. (2026). Deformable scaffold with mechanical tunability for bone tissue engineering. (Brevet no CAWO2026000076A1). Lien externe

Ali, M. S., Ammar, S., Trépanier, J.-Y., & Leclaire, S. (2026). A sharp interface Immersed Boundary approach for Simplified and Highly Stable Lattice Boltzmann Method. International Journal of Heat and Fluid Flow, 110351 (13 pages). Lien externe

Ali, M. S., Ammar, S., Trépanier, J.-Y., & Leclaire, S. (2026). Simplified Multiphase Lattice Boltzmann method for curved geometry using Immersed Boundary Method. Computers & Fluids, 318, 107229 (14 pages). Lien externe

Almeida Da Silva, A., Batailly, A., & Pierre, C. (juin 2026). Comparative Analysis of Mistuning Reduction Techniques for an Industrial Bladed Disk [Communication écrite]. ASME Turbo Expo 2026: Turbomachinery Technical Conference and Exposition (GT 2026), Milan, Italy. Lien externe

Alvarez, P. L., St-Georges, L., Fiset, M., & Brochu, M. (juin 2026). Assessment of Fatigue Design Provisions for Friction-Stir-Welded Aluminum Using Literature S–N Data [Communication écrite]. 16th International Aluminium Conference (INALCO 2026), Trondheim, Norway. Lien externe

Andrade, R., Pugliese, B. L., Mohebbi, A., & Bonato, P. (2026). A Baseline Torque Controller Synchronized with Adaptive Oscillators Improves Transparency of a Six DoF Lower-Limb Exoskeleton. IEEE Transactions on Robotics, 15 pages. Lien externe

Antar, E., Versailles, P., & Robert, É. (2026). Limit phenomena and kinetic modeling of ammonia fuels in an unstrained diffusion flame burner. Proceedings of the Combustion Institute, 42, 106214 (7 pages). Disponible

Antar, E., Versailles, P., & Robert, É. (juillet 2026). Measurements and kinetic modeling of ammonia fuel blends in a unique unstrained diffusion flame burner [Affiche]. 41st International Symposium on Combustion (ICC 2026), Kyoto, Japan. Non disponible

Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2026). Crystallinity, Porosity, and Microstructure of Polyphenylene Sulfide Composite Parts Fabricated by Filament‐Extrusion Additive Manufacturing. Polymer Composites. Lien externe

Aubin, C.-É., Ilharreborde, B., Lenke, L. G., Aubin, D., Kaito, T., Caouette, C., Lafage, V., Smith, J. S., Mullin, J., Larson, A. N., Newton, P. O., Vitale, M. G., & Welborn, M. C. (2026). Transverse-plane descriptors and modifiers of the SRS-Lenke-Aubin 3D classification provide complementary and clinically informative 3D features beyond 2D assessment in Lenke 1 AIS curves. Spine Deformity, 15 pages. Lien externe

Aubin, C.-É., Lenke, L. G., Lafage, V., Welborn, M. C., Smith, J. S., Larson, A. N., Vitale, M. G., Kaito, T., Newton, P. O., Mullin, J., Caouette, C., Aubin, D., & Ilharreborde, B. (2026). Complementary value of transverse plane descriptors in the SRS-Lenke-Aubin 3D classification for adolescent idiopathic scoliosis. Spine Deformity. Lien externe

Aubin, C.-É., Lenke, L. G., Vitale, M., Smith, J. S., Lafage, V., Welborn, M. C., Larson, A. N., Kaito, T., Newton, P. O., Mullin, J., Caouette, C., & Ilharreborde, B. (2026). Erratum: The SRS–Lenke–Aubin 3D classification of adolescent idiopathic scoliosis. Spine Deformity, 3 pages. Lien externe

Auger, F. (2026). Food Acquisition Planning with Vision-Language Models for Robot-Assisted Feeding [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Auger, G. (2026). Development of a Full Potential Solver Using an Immersed Boundary Method for Icing Simulation [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Auger, G., Laurendeau, É., & Hoarau, Y. (janvier 2026). Full Potential Calculations With Immersed Boundary Ghost-Cell Method [Communication écrite]. AIAA SCITECH 2026 Forum, Orlando, FL, USA. Lien externe

Ayala, S., Parenteau, M., & Laurendeau, É. (janvier 2026). High-order harmonic balance vortex lattice method for nonlinear aeroelastic limit cycle oscillations [Communication écrite]. AIAA SCITECH 2026 Forum, Orlando, Florida, USA. Disponible

B

Bawin, A., Garon, A., & Remacle, J.-F. (2026). Isometric Simplices for High-Order Anisotropic Mesh Adaptation. Part I: Definition and Existence of Isometric Triangulations. SIAM Journal on Scientific Computing, 48(1), A335-A362. Lien externe

Beaini, R., Azzi, M., Tavares Avila, P. R., Robert, É., Sapieha, J.-E., & Martinu, L. (2026). Heat transfer analysis in a thermal barrier coating using a small-scale kerosene burner. Surface and Coatings Technology, 536, 133729 (11 pages). Lien externe

Bernier, M. (juin 2026). Modélisation et simulation d'accumulateurs thermiques centraux de type résidentiel avec contrôle prédictif idéal [Communication écrite]. 14th Conference of IBPSA-Canada (eSim 2026), Longueuil, QC, Canada. Lien externe

Bérubé, M.-A., Versailles, P., Savard, B., & Robert, É. (2026). High-temporal-resolution calorimetry of Li-ion cells undergoing thermal runaway. Measurement Science and Technology, 37, 095902 (18 pages). Lien externe

Bianchini, A., Simao Ferreira, C., Paraschivoiu, I., & Melani, P. F. (2026). Are vertical-axis wind turbines a scientific mirage or the future of offshore wind energy? A critical perspective a century after Darrieus' patent. Renewable and Sustainable Energy Reviews, 234, 116915 (16 pages). Lien externe

Bouguezzoul, M. A. (2026). Conditional Quadrature Method of Moments for Populations of Non-Spherical Particles [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Burgunder, T. (2026). Experimental Investigation of Linear Angled Arrays of Micro Jets in a Crossflow for Gas Turbine Applications [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Busho, M., & Kummert, M. (2026). Simulation of energy flexibility strategies in a cluster of dual-fuel commercial and institutional buildings and all-electric residential buildings in a cold climate. Journal of Building Physics. Lien externe

C

Carayon, A., Almeida, P., & Batailly, A. (juin 2026). Validation of the Numerical Simulation of a Rotor/Stator Interaction in the Low-Pressure Radial Compressor of a Helicopter Engine [Communication écrite]. ASME Turbo Expo 2026: Turbomachinery Technical Conference and Exposition (GT 2026), Milan, Italy (11 pages). Lien externe

Chabot, O., Nozari, M., Fan, L., Jella, S., Vabre, M., Vena, P., Day, M., Esclapez, L., & Savard, B. (2026). Fuel consumption and CO emissions in a stratified lean H₂/CH₄ turbulent low-swirl flame impinging on a wall. Proceedings of the Combustion Institute, 42, 106542. Lien externe

Chayer, M., Aubin, C.-É., Arnoux, P.-J., Wang, Z., Manson, N., & Phan, P. (avril 2026). Validation clinique d'un modèle par éléments finis personnalisé pour l'OLIF chez les patients atteints de spondylolisthésis dégénératif de grade I [Résumé]. 44e Journée de la recherche du POES et de la Division d'orthopédie de l'Université de Montréal, Montréal, QC, Canada. Lien externe

Chayer, M., Phan, P., Arnoux, P.-J., & Aubin, C.-É. (2026). Geometric foundations of measurement uncertainty and clinical relevance in radiographic spinal angle assessment. Spine Deformity, 9 pages. Lien externe

Chayer, M., Phan, P., Arnoux, P.-J., Wang, Z., Manson, N., Bigney, E., & Aubin, C.-É. (2026). Clinical validation of patient-specific finite element biomechanical modelling for oblique lumbar interbody fusion in grade I degenerative spondylolisthesis. [Résumé]. Canadian Journal of Surgery, 69(5suppl1), S67-S68. Présentée à 26th Annual Scientific Conference of the Canadian Spine Society, Banff, AB, Canada. Lien externe

Chen, C., Tian, G., Qin, S., Yang, S., Geng, D., Zhan, D., Yang, J., Vidal, D., & Leon Wang, L. (2026). Urban wind field prediction using Fourier Neural Operators across different wind directions and cities. Building Simulation. Lien externe

Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (juillet 2026). Embedded PZT-CFRP piezoelectric energy harvesters for aircraft applications [Résumé]. 32nd International Congress on Sound and Vibration (ICSV32), Istanbul, Türkiye. Non disponible

Choudhary, R., Rzig, I., Fotsing, E. R., Ross, A., & Michon, G. (2026). Modeling of elastic, electromechanical coupling and damping nonlinearities for cantilever beam piezoelectric energy harvesters. Smart Materials and Structures, 35, 015028 (17 pages). Disponible

Choudhary, R., Rzig, I., Fotsing, E. R., Ross, A., & Michon, G. (2026). Optimization of embedded piezoelectric layers in CFRP composite vibration energy harvesters to improve power output. Composite Structures, 120892. Lien externe

Cimmino, M. (mai 2026). High-order finite line source solution for the simulation of straight geothermal boreholes [Communication écrite]. 15th IEA Heat Pump Conference (HPC 2026), Vienna, Austria (10 pages). Lien externe

Cimmino, M., Basquens, M., & Lazzarotto, A. (2026). Higher-order semi-analytical model for the simulation of geothermal boreholes. International Journal of Thermal Sciences, 219, 110184. Lien externe

Comallonga Gavaldà, O., Saad, M., Mokadam, K., Osman, M., Eicker, U., Vanroy, K., Kummert, M., Delcroix, B., Sansregret, S., Le Lostec, B., Chabot, C., & Awad, M. (juin 2026). Developing and calibrating multi-unit residential building prototypes in Québec in the framework of Archetype-QC [Communication écrite]. 14th Conference of IBPSA-Canada (eSim 2026), Longueuil, QC, Canada. Lien externe

Constant, C., Larson, A. N., Polly, D. W., & Aubin, C.-É. (2026). AI-derived versus surgeon-performed instrumentation in adolescent idiopathic scoliosis: a biomechanical simulation analysis. Spine Deformity, 14 pages. Lien externe

Coulombe, M., Guy, A., Manitiu, A., Prioriello, G., Joncas, J., Barchi, S., Brassard, F., Chémaly, O., Parent, S., Labelle, H., & Aubin, C.-É. (avril 2026). Efficacité sur deux ans des corsets générées automatiquement par un algorithme d'optimisation pour le traitement de la scoliose idiopathique de l'adolescent : protocole [Résumé]. 44e Journée de la recherche du POES et de la Division d'orthopédie de l'Université de Montréal, Montréal, QC, Canada. Lien externe

D

Delcroix, B., Sansregret, S., Vanroy, K., Gavaldà, O., Le Lostec, B., Kummert, M., Eicker, U., Larochelle Martin, G., & Chabot, C. (juin 2026). Archetype QC: Prototype Building Models for the Province of Québec [Communication écrite]. 14th Conference of IBPSA-Canada (eSim 2026), Longueuil, QC, Canada. Lien externe

Denner, F. (2026). Water droplet dynamics and evaporation in airtanker firefighting. International Journal of Multiphase Flow, 199, 105696 (10 pages). Lien externe

Desgagnés, L., Tangestani, R., Khan, W. N., Miao, H., Natarajan, A., Rudloff, R., Pendurti, S., & Martin, É. (mars 2026). Thermal Model for Binder Jetting Application: Simplified Thermal Boundary Conditions [Communication écrite]. 155th TMS Annual Meeting & Exhibition, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe

Diamant, A., Lucas, T., Rodríguez-Núñez, O., Chae, S., Gros, E., Hahne, C., Maragkou, T., McKinley, R., Schucht, P., & Novikova, T. (janvier 2026). Correction of polarimetric artifacts caused by a plastic cover in imaging Mueller polarimeter operating in reflection mode [Communication écrite]. BiOS, 2026, San Francisco, CA, USA. Lien externe

Ding, Z., Wawrzyniak, N., Brochu, M., Brochu, M., & Song, J. (2026). Quantitative study of Gas-Pore porosity threshold values in LPBF 316 L stainless steel and Ti6Al4V using X-ray computed tomography and ductile fracture criterion analysis. Engineering Fracture Mechanics, 345, 112544 (21 pages). Lien externe

Donegan, K., Fernandes, L. J. W., Hébert, A., Eaton, M. D., Latimer, C., Wilson, S., & Kópházi, J. (2026). Subgroup and Resonance Spectrum Expansion Self-Shielding Methods Using a Discontinuous Bubnov-Galerkin Isogeometric Analysis Discrete Ordinate Discretization of the Neutron Transport Equation. Nuclear Science and Engineering, 31 pages. Lien externe

Duchesne, O., Broggi, C., Chizari, K., Therriault, D., & Gosselin, F. (2026). Two-dimensional cellular material optimization for additive manufacturing of sandwich panels. Materials & Design, 117416. Lien externe

Duval, D. (octobre 2026). Système d'autonomisation basé sur un jumeau numérique alimenté par des données issues de capteurs pour optimiser l'effet correcteur du corset chez les adolescents atteints de scoliose idiopathique. [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

E

El-Mellouhi, A., Adjal, Y., Dhibi, K., & El-Mellouhi, F. (2026). Multiphysics Modeling of Thermo-viscoelastic Damage in Functionally Graded Abradable Coatings with Probabilistic Geometric Tolerance Analysis. Integrating materials and manufacturing innovation. Lien externe

Elices Paz, P., Radenac, E., Blanchard, G., Péron, S., Laurendeau, É., & Villedieu, P. (2026). Immersed Boundary Methodology for Three-Dimensional Multistep Ice Accretion Simulations. [Présentation]. Journal of Aircraft, 16 pages. Présentée à AIAA Aviation forum and ascend 2025, Las Vegas, NV, USA. Lien externe

Elices Paz, P., Radenac, E., Péron, S., Blanchard, G., Laurendeau, É., & Villedieu, P. (2026). Second-Order Ghost-Cell Immersed Boundary Method for Inviscid Aero-Icing Simulations on 2D and 3D Geometries. Computers & Fluids, 107012. Lien externe

Eslami Nejad, P., Seabrook, J., & Shaw, M. (mai 2026). Decarbonizing Campus Heating: Preliminary field Performance data of a Subcritical R744 Heat Pump for Ambient District Energy System [Communication écrite]. 15th IEA Heat Pump Conference (HPC 2026), Vienna, Austria (6 pages). Lien externe

Esmati, K. (2026). Sintering Behavior And Mechanical Properties Of Stainless Steels Fabricated By Powder Bed Binder Jet Printing [Thèse de doctorat, Polytechnique Montréal]. Disponible

Esmati, K., Khan, W. N., Pendurti, S., Natarajan, A., & Martin, É. (mars 2026). Effect of Powder Size Distribution on Anisotropic Shrinkage of Binder Jet 316L Stainless Steel Parts [Communication écrite]. 155th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe

Étienne, S., Béguin, C., Mougang Kouangue, E. J., & Couty, N. (juin 2026). Validation of Cahn-Hilliard Navier-Stokes Equations With Theoretical and Experimental Solutions for Impact Wave Problems [Communication écrite]. 45th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2026), Tokyo, Japan. Lien externe

F

Farshad, S., & Fortin, C. (2026). An umbrella review of meta-analyses on project-based learning: Effects on academic achievement, higher-order thinking, and 21st-century skills. Educational Research Review, 52, 100809 (19 pages). Lien externe

Fecteau, M.-È. (octobre 2026). Corset reconfigurable jour-nuit pour la scoliose idiopathique de l'adolescent [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

Fecteau, M.-È., Mélançon, D., Beauséjour, M., Unde, J., & Aubin, C.-É. (avril 2026). Corset jour-nuit reconfigurable pour la scoliose idiopathique de l'adolescent [Résumé]. 44e Journée de la recherche du POES et de la Division d'orthopédie de l'Université de Montréal, Montréal, QC, Canada. Lien externe

Fu, C., Fan, L., Ding, Y., Wang, Y., Maya, L., Vena, P., Savard, B., & Gao, Y. (2026). Event-based diagnostics of flame dynamics. Proceedings of the Combustion Institute, 42, 106227 (8 pages). Lien externe

Füri, M., Durocher, A., Sirois, J., Charreton, C., May, D., Bourque, G., Bergthorson, J., Yun, S., & Vena, P. (2026). Thermoacoustic study of a multi-nozzle combustion system with hydrogen at high-pressure: Ignition and limit cycle. Proceedings of the Combustion Institute, 42, 106049 (8 pages). Lien externe

G

Gaboriault, O., Timercan, A., Pelletier, R., Lefebvre, L.-P., Mélançon, D., & Blais, B. (2026). Increase in packing density during multi-layer powder spreading: An experimental and numerical study. Powder Technology, 122460. Lien externe

Gay, M. (octobre 2026). Développement d'une plateforme de planification pré-opératoire et de guidage intra-opératoire du tethering vertébral pour la scoliose idiopathique pédiatrique [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

Gay, M., Cobetto, N., Larson, A. N., Villemure, I., Caouette, C., Boeyer, M., Hoernschemeyer, D., El-Hawary, R., Alanay, A., & Aubin, C.-É. (avril 2026). Correction intraopératoire biomécaniquement guidée pour la chirurgie de tethering vertébral lombaire et thoraco-lombaire [Résumé]. 44e Journée de la recherche du POES et de la Division d'orthopédie de l'Université de Montréal, Montréal, QC, Canada. Lien externe

Gay, M., Larson, A. N., Boeyer, M., Cobetto, N., Caouette, C., Villemure, I., Hoernschemeyer, D., Alanay, A., El-Hawary, R., & Aubin, C.-É. (2026). Toward biomechanically optimized intraoperative correction in lumbar vertebral body tethering. Spine Deformity, 9 pages. Lien externe

Ghiasi Noughaby, A., Amiri, P., Kearney, R. E., & Mohebbi, A. (2026). Characterizing the Nonlinear Dynamics of the Human Postural Sway Response to Visual Stimuli. Journal of Neurophysiology. Lien externe

Ghodake, D. (mai 2026). Investigating Low-Frequency Acoustic Dissipation Mechanisms Using Digital Normal-Incidence Impedance Tubes [Communication écrite]. 32nd AIAA/CEAS Aeroacoustics Conference, Brussels, Belgium. Lien externe

Gholamrezaie, S. (2026). Investigation of the CO2 Thermal Network Connected to Local Heat Pumps for Heating and Cooling of Buildings [Thèse de doctorat, Polytechnique Montréal]. Disponible

Gholamrezaie, S., Cimmino, M., & Eslami Nejad, P. (2026). Map-based supervisory control strategies of a single-pipe CO₂ thermal network connected to local heat pumps. Energy and Buildings, 369, 118014 (20 pages). Lien externe

Ghorbani, E., Dollon, Q., & Gosselin, F. (2026). Joint parameter estimation and abrupt change quantification with uncertainty quantification in high degree of freedom dynamical systems via an optimized adaptive unscented Kalman filter. Discover Mechanical Engineering, 5(1), 147 (27 pages). Lien externe

Gosselin, F., & Abda, M. (2026). Methods and Systems for Training a Neural Network to Solve a Physical Problem Using the Finite Element Method (fem). (Demande de brevet no WO2026/020231 A1). Lien externe

Grzesik, W., Attia, H. M., Wegener, K., Rech, R., & Balazinski, M. (2026). Intelligent Methods for Quantifying and Determining Friction in the Cutting Process - a Review [Commentaire ou lettre]. Journal of Machine Engineering, 26, 5-19. Lien externe

Guerziz, A., Lajili, C., Sarojini Narayana, S., Arote, B., Panesar, A., & Bodkhe, S. (mars 2026). 3D printing of smart materials for reconfigurable drones [Communication écrite]. SPIE Smart Structures + Nondestructive Evaluation, Vancouver, BC, Canada. Lien externe

H

Haddad, E. (2026). Sulfur functionalization of graphene: pattern depen-dent electronic and magnetic properties [Ensemble de données]. Lien externe

Haghighi, A., Arjmand, N., Azimi, P., Shirazi-Adl, A., & El-Rich, M. (2026). Biomechanical effects of partial and full L4-L5 disc nucleotomy: a coupled musculoskeletal finite element modeling study. Journal of Orthopaedic Surgery and Research, 21, 22. Lien externe

Han, M., Yang, S., Meulemans, M., Raslan, A., Bourque, G., & Bergthorson, J. M. (2026). Velocity and NO measurements in preheated hydrogen flames. Proceedings of the Combustion Institute, 42, 106738 (7 pages). Lien externe

Hangan, H., McKenty, F., Gravel, L., & Camarero, R. (juin 1999). Internal ventilation study for complex architectural geometry [Communication écrite]. 10th International Conference on Wind Engineering, Copenhagen, Denmark. Lien externe

Holloway, M. B., El Hawary, R., Ritzman, T. F., Rundell, A. N., Steiner, R. P., Mishreky, A., Hurry, J. K., Proto-Newton, M., Spine Study Group (P. S. S. G), P., Accousti, W. K., Ahn, E., Akbarnia, B. A., Akoto, H., Albanese, S., Brett Anari, J., Anderson, J., Anderson, R., Andras, L. M., Aubin, C.-É., ... Iqbal, O. (2026). Sagittal spine length moderately correlates with pulmonary function for the timing of definitive fusion in growth-friendly graduates with early onset scoliosis. Spine Deformity, 14(4), 1405-1415. Lien externe

J

Jismani, A. (octobre 2026). Modélisation par éléments finis du tethering pédiculaire vertébral postérieur comme alternative au VBT antérieur [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

K

Karamova, A., Fortin, C., & Nikolaev, A. (2026). Navigating knowledge silos and system distrust in cross-sectoral R&D. Proceedings of the Design Society, 6, 377-386. Lien externe

Karna, S., Al-Aridi, R., Morrall, D., Masse, J.-P., Sun, C., Zhang, T., Gross, A. J., Hosseinzadeh, H., Martin, É., Krentz, T., Hitchcock, D., & Yuan, L. (2026). Microstructural evolution, defect mitigation, and precipitation behavior in AA6061 via laser powder bed fusion with high-temperature substrate heating. Materials Science and Engineering A, 970, 150474 (22 pages). Lien externe

Kashanj, S., Li, H., Son, J., Broumand, M., Durocher, A., Vena, P., & Hong, Z. (juin 2026). Application of High-Speed Background-Oriented Schlieren (BOS) in Studying Flame-Wall Interaction [Communication écrite]. 22nd International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics (22ndLxSymp), Lisbon, Portugal (17 pages). Lien externe

Kazeruni, M., Belkhiri, N., Nohair, B., Kaliaguine, S., & Ruiz, E. (2026). Functionalized recycled carbon black from waste tires reinforced bio-high density polyethylene from sugarcane. Carbon Resources Conversion, 100421 (12 pages). Lien externe

Khazaee, S., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (2026). Formulation and Characterization of Stainless Steel-Based Feedstocks for Fused Deposition Modeling: Effects of Binder Composition on Rheology, Printability, Physical, and Mechanical Properties. Materials science forum, 1174, 69-75. Lien externe

Koch, M.-L. (2026). Modeling and Optimization of Solar Power Plants with Battery Energy Storage Systems [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

L

Laperle, V., Ghorbani, E., Dollon, Q., & Gosselin, F. (2026). Digital twin of a pipe conveying fluid: Flow rate anomaly detection and quantification via multi-fidelity Kalman filters and event based cameras signals. Mechanical Systems and Signal Processing, 248, 114027 (16 pages). Lien externe

Le Floc'h, A., Hu, N., Herr, M., Pester, B., Di Labbio, G., & Vétel, J. (mai 2026). Noise Cancellation Techniques for Wall Pressure Fluctuations Measurements Beneath Turbulent Boundary Layers [Communication écrite]. 32nd AIAA/CEAS Aeroacoustics Conference, Brussels, Belgium. Lien externe

Leclerc, É. (2026). Actuating Metamaterials via Centrifugal Force: Towards Passively Adapting Permanent Magnet Synchronous Motors [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Lecompte, O. (2026). Development of a Non-Invasive Proprioceptive Feedback Strategy for Upper-Limb Robotic Prosthesis Users [Thèse de doctorat, Polytechnique Montréal]. Disponible

Lecompte, O., Achiche, S., Haddad, M., Gesta, A., & Mohebbi, A. (2026). Non-invasive somatotopic proprioceptive feedback for closed-loop robotic hand aperture control. Journal of Neural Engineering. Lien externe

Li, Z., Vabre, M., Brahic, L., Versailles, P., & Savard, B. (2026). Effects of backstep on flame stabilization and NOₓ formation in hydrogen micromix combustion. Proceedings of the Combustion Institute, 42, 106588. Lien externe

Li, Z., Versailles, P., Vabre, M., Brahic, L., & Savard, B. (juillet 2026). Effects of backstep on flame stabilization on NOx formation in hydrogen micromix combustion [Présentation]. Dans 41st International Symposium on Combustion (ICC 2026), Kyoto, Japan. Non disponible

Lombard, M., Khan, W. N., Paques, M., Changeux, B., Tangestani, R., & Martin, É. (mars 2026). A DEM-FEM Coupled Model for Simulating Vibratory Peening of Ti6Al4V Alloy [Communication écrite]. 155th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe

M

Ma, Y., Achiche, S., Lessard, D., Engler, K., Vicente, S., Tu, G., Lemire, B., Del Balso, L., Paisible, N., & Lebouché, B. (2026). Large language model-based triage to identify antiretroviral therapy adherence barriers and risk levels in patient messages. JAMIA Open, 9(5), ooag169 (20 pages). Disponible

Ma, Y., Achiche, S., Lessard, D., Engler, K., Vicente, S., Tu, G., Lemire, B., Del Balso, L., Paisible, N., Chatbots Patient Expert Committee, M. A. R. V. I.N., & Lebouché, B. (2026). Data from: Large language model-based triage to identify antiretroviral therapy adherence barriers and risk levels in patient messages [Ensemble de données]. Lien externe

Ma-El-Ainine, M. F. A., Boukhili, R., & Savadogo, O. (2026). A New Power Dissipation Model and Its Analytic Formulation for Electric-Field-Driven Water Dissociation in the Cationic/Anionic Bipolar Polymer Membrane Junctions. Membranes, 16(3), 94 (23 pages). Lien externe

Ma-El-Ainine, M. F. A., Boukhili, R., & Savadogo, O. (2026). Power-Dissipation Model for Water Dissociation in Bipolar Membranes: Model Extension to High Current Density and Experimental Validation. Membranes, 16(9), 283 (25 pages). Lien externe

Machach, S., & Hébert, A. (2026). Environment Insensitive Reflector Homogenization Through a Response Matrix Equivalence Method Based on the Relaxed Flux Continuity Equation. Nuclear Science and Engineering, 14 pages. Lien externe

Madic, E. (2026). Application d'un modèle de fuites simplifié pour le calcul d'assemblage de réacteurs nucléaires en environnement [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Majidi, S., Ali Sharifi, M., & Omidalizarandi, M. (2026). Deep learning-based crack detection and 3D reconstruction for cost-effective structural health monitoring. Measurement Digitalization, 7, 100040 (17 pages). Lien externe

Massin, J., & Birglen, L. (2026). On Solving the Differential Direct Kinematics of Planar, Spherical, Orientational, and Translational Linkages. IEEE Transactions on Robotics, 15 pages. Lien externe

Matys-Popielska, K., Mayer, J. R. R., Woźniak, A., & Guiassa, R. (2026). Dynamic response model of machine tool scanning probe at high scanning speeds. Measurement, 290, 122804 (17 pages). Lien externe

Mazloum, A., Gennari, G., Denner, F., & van Wachem, B. (2026). Datarepository for fully coupled implicit finite-volume algorithm for viscoelastic interfacial flows [Ensemble de données]. Lien externe

Mehrabian, P., & Mureithi, N. W. (2026). Flow induced vibration in a 2D mixed geometry tube array. Journal of Fluids and Structures, 148, 104685 (34 pages). Lien externe

Meunier, G., & Kummert, M. (juin 2026). Assessing district energy scenarios: how detailed should building models be? [Communication écrite]. 14th Conference of IBPSA-Canada (eSim 2026), Longueuil, QC, Canada. Lien externe

Meynard-Duffour, L. (octobre 2026). Évaluation des conséquences biomécaniques des niveaux de fusion et du cintrage des tiges sur les segments adjacents dans la scoliose idiopathique de l'adolescent [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

Monajati, L., Vadean, A., & Boukhili, R. (2026). Scaling effects in adhesively bonded composite joints: The influence of laminate thickness on the structural efficiency of single strap configurations. International Journal of Adhesion and Adhesives, 149, 104358 (13 pages). Lien externe

Moradi, M., Arunkumar, S., Azzi, M., Bitar-Nehme, E., Natarajan, A., Khazaee, S., & Martin, É. (2026). Binder Jetting of Co-Cr-Mo Alloys for Biomedical Applications: A Tribocorrosion Perspective. Key Engineering Materials, 1038, 31-36. Lien externe

Moradi, M., Khan, W. N., Bitar-Nehme, E., & Martin, É. (2026). Investigations on printability and sintering of additively manufactured binder jet Co-Cr-Mo alloy parts for biomedical applications. Journal of Manufacturing Processes, 170, 138-152. Lien externe

Mousavi, A., Mouttet, L., Cui, S., Hekmatnia, Y., Mottahedi, M., Derish, I., Rafatian, N., Aurousseau, M., Andelfinger, G., Cecere, R., & Savoji, H. (2026). Patient‐Derived 3D Heart‐On‐a‐Chip Model of Dilated Cardiomyopathy With Embedded Bead‐Based Mapping of Tissue Contractility. Advanced Healthcare Materials, e71464 (19 pages). Lien externe

N

Nammuni Arachchilage, C., Bérubé, M.-A., Versailles, P., Robert, É., & Savard, B. (2026). Ignition of lithium-ion battery vent gases: Combined experimental and numerical investigation. Journal of Energy Storage, 155, 121310 (13 pages). Lien externe

Nammuni Arachchilage, C., Li, Z., Vabre, M., Versailles, P., Robert, É., & Savard, B. (2026). DNS of a jet flame at Li-ion cell thermal runaway conditions: Ignition and stabilization. Proceedings of the Combustion Institute, 42, 106381 (8 pages). Lien externe

Nammuni Arachchilage, C., Li, Z., Versailles, P., Robert, É., & Savard, B. (juillet 2026). DNS of a jet flame at Li-ion cell thermal runaway conditions: ignition and stabilization [Présentation]. Dans International Symposium on Combustion (ISOC 2026), Kyoto, Japan. Lien externe

Nemati, A., David, A., Zhang, Y., Savoji, H., & Faure, C. (2026). Engineering the esophagus: advances, challenges, and translational pathways in esophageal tissue reconstruction. Biofabrication. Lien externe

Norouzzadeh, R., Behzadipour, S., Mohebbi, A., & Lancini, M. (2026). Modeling and validation of crutch-supported exoskeleton gait using a double-inverted pendulum approach. Journal of NeuroEngineering and Rehabilitation. Lien externe

O

Ouadday, R., Abusrea, M., Hegab, H. M., Vadean, A., & Boukhili, R. (2026). A coupled diffusion–degradation framework for hygrothermal service-life prediction of GFRP laminates in hydroelectric applications. Journal of Reinforced Plastics and Composites, 21 pages. Lien externe

P

Pérez Zerpa, J. M., Camilo Vanzulli Pena, M., Villié, A., Viera Sosa, J., Ariel Merlino Chiozza, S., Schaedler de Almeida, F., & Bazzano García, B. (2026). ONSAS: an Open Nonlinear Structural Analysis Solver for GNU-Octave/MATLAB. The Journal of Open Source Software, 11(120), 9604-9604. Lien externe

Petilleon, N., Chevrier, B., Faure, L., Ahyee, A., Batailly, A., & Philippon, S. (2026). Multiscale Analysis of AlSi-PE Abradable Coating Subjected to Dynamic Shear Loading. Experimental Mechanics, 19 pages. Lien externe

Pillot, C. (octobre 2026). Comment faut-il cintrer les tiges pour restaurer l'alignement sagittal tout en garantissant une correction 3D efficace de la scoliose idiopathique adolescente ? Une étude biomécanique personnalisée au patient [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

Pillot, C., Wang, X., Ritzman, T., Floccari, L., Schwend, R. M., & Aubin, C.-É. (2026). Modeling rod elasto-plasticity improves biomechanical simulation of adolescent idiopathic scoliosis instrumentation. Computer Methods in Biomechanics and Biomedical Engineering, 10 pages. Lien externe

Plante, R. (2026). Multinozzle Architecture for Additive Manufacturing of High-Viscosity Thermosets for Aerospace Applications [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Pomerleau, A., Lafaye, P., Brochu, M., & Harvey, J.-P. (mars 2026). On the Effect of Tramp Elements on the Phase Assemblage of Aluminum Alloys Synthesized with Increased Recycled Content [Communication écrite]. Light Metals 2026, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe

Popiolek, A., Laberge Lebel, L., Ahrens, C. H., Mariz de Oliveira Barra, G., & Ferrari de Souza, A. (2026). Mechanical properties of plastic parts produced by molds manufactured by additive manufacturing technology (LPBF) with conformal cooling channels. The International Journal of Advanced Manufacturing Technology, 13 pages. Disponible

Q

Qureshi, M. A., Abou Adma, H. H., Tayyab, T., Hadagali, P., & Swamy, G. (2026). Surface topography modifications of pedicle screws in spine surgery: a scoping review. [Résumé]. Canadian Journal of Surgery, 69(5suppl1), S71-S71. Présentée à 26th Annual Scientific Conference of the Canadian Spine Society, Banff, AB, Canada. Lien externe

R

R. Alanagh, H., Ojagh, S. M. A., Jafari, A., Zhan, X., Sprules, T., Poulhazan, A., Savoji, H., Hendricks, A. G., van de Ven, T. G. M., & Harrington, M. J. (2026). Mistletoe‐ and Mussel‐Inspired Fabrication of Hierarchically Structured Protein‐Cellulose Scaffolds From Biomolecular Condensates. Advanced Materials, 14 pages. Lien externe

Ravichandran, S., Hojjati, M., Fotsing, E. R., & Ross, A. (août 2026). Sustainable acoustic insulation: perforated recycled PET foam-honeycomb sandwich structure with improved half-absorption bandwidth [Présentation]. Dans 14th Canadian-International Conference on Composites (CANCOM-2026), Vancouver, British Columbia, Canada (9 pages). Lien externe

Ravichandran, S., Hojjati, M., Fotsing, E. R., & Ross, A. (juin 2026). Improvement of sound absorption characteristics of honeycomb sandwich panel with heterogeneous micro perforations using numerical analysis [Résumé]. 29th edition of the International Conference on Composite Structures (ICCS 29), Cagliari, Italy. Lien externe

Risha, A. C., Lenz, E., Viggiano, B., Bae, H. J., & Gayme, D. F. (2026). Modal triadic interaction informed restricted nonlinear models. [Présentation]. Journal of Physics Conference Series, 3230(1), 012002 (15 pages). Présentée à 6th Madrid Turbulence Workshop (MTW 2025), Madrid, Spain. Lien externe

Robaczewski, T., & Bodkhe, S. (mars 2026). 3D printed SMA-driven soft actuators [Communication écrite]. SPIE Smart Structures and Materials + Nondestructive Evaluation 2026, Vancouver, BC, Canada. Lien externe

Rong, F., Schneider, M., Hasse, C., Savard, B., Olguin, H., & Scholtissek, A. (2026). Self-contained composition-space modeling of premixed deflagration and autoignition fronts. Proceedings of the Combustion Institute, 42, 106101. Lien externe

Rouzbayani, A., Sobhani Tehrani, E., Amiri, P., Kearney, R. E., & Mohebbi, A. (2026). Methods for the identification of ankle joint dynamics using a novel sub-malleolar interface. Clinical Biomechanics, 106962. Lien externe

S

Sabbagh, G., Cimmino, M., Delcroix, B., & Luis, R. (juin 2026). From Steady Setpoints to Rich Data: Neural Ordinary Differential Equations Insights [Communication écrite]. 14th Conference of IBPSA-Canada (eSim 2026), Longueuil, QC, Canada. Lien externe

Salehi, P., & Shirazi-Adl, A. (2026). Computational biomechanics of human knee joint in maximum voluntary isometric extension with focus on the role of joint center positioning. Scientific Reports. Lien externe

Sanni O., K. (2026). Fatigue Behavior of Additively Manufactured LPBF-M789 Maraging Steel Under the Influence of Discontinuities [Thèse de doctorat, Polytechnique Montréal]. Disponible

Sanni O., K., D'Andrea, A., Cova, M., Patriarca, L., & Brochu, M. (2026). Discontinuity-controlled fatigue performance and model assessment for LPBF-M789 maraging stainless steel with different surface conditions. International Journal of Fatigue, 209, 109627 (22 pages). Lien externe

Satari, E., & Leclaire, S. (2026). Physically consistent modification of a phase-field diffuse-interface lattice Boltzmann model for multiphase flow. Computers & Fluids, 314, 107105. Lien externe

Sauquet, H., Chiacchiarelli, L. M., & Ruiz, E. (2026). Molecular Weight–Dependent Reinforcement of Biobased Aromatic Thermoplastic Polyurethanes Using Vegetable Oil Crosslinkers. Polymer Engineering and Science, 66(5), 3845-3859. Lien externe

Schefler, T. (2026). Application de la méthode de modélisation de réflecteurs Baff-Refl dans Cocagne [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Senarathna, N., Li, Z., Versailles, P., Robert, É., & Savard, B. (juillet 2026). DNS of a jet flame at li-on cell thermal runaway conditions : ignition and stabilization [Affiche]. 41st International Symposium on Combustion (ICC 2026), Kyoto, Japan. Non disponible

St-Gelais, P. (2026). Développement de muscles artificiels spiralés à base de filaments composites Kevlar/Polyuréthane thermoplastique pultrudés [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Stelvaga, A., Meskoob, B., Brovar, Y., & Fortin, C. (2026). From risk to opportunity: a novel framework for technology infusion evaluation in engineering design. Design Science, 12, 39 pages. Lien externe

T

Therriault, D., Dermanaki Farahani, R., Duchesne, O., Chauvette, J.-F., Pierre, J., & Gregorio, P. (octobre 2025). Extrusion-Based Additive Manufacturing of Large Composite Structures for Aerospace Applications [Communication écrite]. 39th Technical Conference of the American Society for Composites (ASC 2025), Dayton, OH, USA. Publié dans Proceedings of the American Society for Composites Annual Technical Conferences. Lien externe

Tkachenko, N., Verma, T., Staffell, I., Benmarraze, S., Li, Y., Goussous, N., Hussain, B., Dixon, L., Jose García Méndez, J., Partasides, G., Leonard, A., Gardumi, F., Martindale, L., Lerner Nesbitt, A., Shivakumar, A., Zie, E., Al Assal Filho, N., Wangari, K., Uddin Riadh, S., ... Howells, M. (2026). Governing Artificial Intelligence for Energy Planning and Transition: Shared AI Governance for Energy Systems (SAGES) - A briefing note. (Rapport technique). Lien externe

Tong Chung, W., Ihme, M., Sung Jung, K., H. Chen, J., Guo, J., Brouzet, D. J., Talei, M., Jiang, B., Savard, B., Poludnenko, A., Akoush, B. M., Sharma, P., Tamkin, A., Wang, Q., Shahane, S., Chen, Y., Coulon, V., Lapeyre, C., Gauding, M., ... Chi, C. (2026). BLASTNetv3: Multiphysics Simulation Dataset [Ensemble de données]. Lien externe

Tuysuz, O. (octobre 2026). Advancing machining physics for automated process development [Présentation]. Dans 7th Wiener Produktionstechnik Kongress (WPK2026), Vienna, Austria. Non disponible

Tyagi, S. A., Mallaiah, M., Pasco, J., Aranas, C., Tangestani, R., & Martin, É. (2026). Dynamic behavior of Ti6Al4V TPMS lattice structures manufactured using laser powder bed fusion. Mechanics of Materials, 221, 105776 (21 pages). Lien externe

U

Uwase, E., Caru, M., Lévesque, A., Sholler, C., McAlexander, J., Dodin, P., Curnier, D., & Périé-Curnier, D. (2026). Exercise stress cardiac magnetic resonance imaging in cardiac patients. Expert Review of Cardiovascular Therapy, 24(3), 207-234. Lien externe

V

Vanroy, K., Kummert, M., Comallonga Gavaldà, O., Eicker, U., Delcroix, B., Sansregret, S., Le Lostec, B., & Chabot, C. (juin 2026). Development and calibration of single-family dwelling prototype models for Archetype QC [Communication écrite]. 14th Conference of IBPSA-Canada (eSim 2026), Longueuil, QC, Canada. Lien externe

Vartazarmian, M., Abid, A., Chermat, R., Têtu, M., Bulgarelli Maqueda, L., Sarshoghi, A., Naghieh, S., Périé-Curnier, D., & Liberman, M. (2026). Ex-PALM: a negative pressure ventilation system for air leak evaluation in ex vivo lungs. Frontiers in Bioengineering and Biotechnology, 13. Lien externe

Veilleux, S.-M. (octobre 2026). Modélisation par éléments finis du traitement de la scoliose infantile par modulation de croissance avec le système Modern Luqué Trolley [Présentation]. Dans Société de la scoliose du Québec 2026, Bromont, Québec, Canada. Non disponible

W

Wang, H., Bai, S., Bouteiller, H., Cuenat, A., Díaz-Chao, P., Goth, N., Liao, J., Konig, J., Maddux, J. R., Oh, M.-W., Parker, T., Salvador, J. R., Song, Q., Taylor, P. J., Vasilevskiy, D., & Verdier, P. (2026). An International Round-Robin study on thermoelectric module testing and development of standard power generation modules. Journal of Electronic Materials, 55, 3402-3417. Lien externe

Wang, H., Bai, S., Bouteiller, H., Cuenat, A., Díaz-Chao, P., Goth, N., Liao, J., Konig, J., Maddux, J. R., Oh, M.-W., Parker, T., Salvador, J. R., Song, Q., Taylor, P. J., Vasilevskiy, D., & Verdier, P. (2026). Correction: An International Round-Robin study on thermoelectric module testing and development of standard power generation modules. Journal of Electronic Materials, 55, 3418-3418. Lien externe

Wang, X., Aubin, C.-É., Coleman, J., Redmond, J., Aruwajoye, O., & Rawlinson, J. (2026). Biomechanical modeling of elastoplastic behavior of spinal rod in spinal instrumentation. Computer Methods in Biomechanics & Biomedical Engineering, 13 pages. Lien externe

X

Xing, K., Mayer, J. R. R., Cianyi, Y., Bonev, I., Liu, Z., & Champliaud, H. (2026). Optimization of robotic machining through circular path error compensation. Robotics and Computer-Integrated Manufacturing, 101, 103302 (23 pages). Lien externe

Xue, W., Théroux, J., Labelle, H., Barchi, S., Joncas, J., Elsemin, O., Lorange, J.-P., Le May, S., Fortin, C., Aubin, C.-É., Parent, S., Ouellet, J., & Beauséjour, M. (avril 2026). Évaluation préliminaire comparative du MOBI-18f chez les adolescents avec scoliose idiopathique traités avec un corset de nuit [Résumé]. 44e Journée de la recherche du POES et de la Division d'orthopédie de l'Université de Montréal, Montréal, QC, Canada. Lien externe

Xue, W., Théroux, J., Labelle, H., Barchi, S., Joncas, J., Elsemin, O., Lorange, J.-P., Le May, S., Fortin, C., Aubin, C.-É., Parent, S., Ouellet, J., & Beauséjour, M. (2026). Preliminary comparative evaluation of MOBI (My Orthopedic Brace Inventory) in adolescents with idiopathic scoliosis treated with a nighttime brace. [Résumé]. Canadian Journal of Surgery, 69(5suppl1), S89-S89. Présentée à 26th Annual Scientific Conference of the Canadian Spine Society, Banff, AB, Canada. Lien externe

Y

Yahiaoui, H., Mureithi, N. W., & Lakis, A. A. (2026). The aeroelastic behavior of curved plates subjected to supersonic airflow using the hybrid finite element method. Thin-Walled Structures, 230, 115180 (24 pages). Lien externe

Yousfi, A. (2026). A Collaborative Robotic Framework for Aerospace Drilling: the Design of a Smart Drilling End-Effector and an Adaptive Drilling System [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Z

Zabiolle, J., Paoli, R., & Viggiano, B. (2026). An optical method for quantifiable three-component LDA/LDV/PDA laser alignment. Measurement Science and Technology. Lien externe

Zayni, M. K., Blanchet, M., & Laurendeau, É. (2026). A Ray-Tracing-Enhanced Lagrangian Particle Tracking Framework for Ice Accretion Applications. Aerospace Science and Technology, 112019. Lien externe

Zhang, Y., Yan, J., Zhao, J., Gou, X., & Cai, J. (2026). From Topology to Stimuli: Programming Mechanical Behavior in GaN Spinodoid metamaterials. Thin-Walled Structures, 115654. Lien externe

Zheng, Y., Fu, G., Mayer, J. R. R., Mu, S., & Zhu, S. (juin 2025). Thermal Error Modeling in CNC Machine Tool Spindles Using Transfer Learning with GRU [Communication écrite]. 4th International Conference on Thermal Issues in Machine Tools (ICTIMT 2025), Zurich, Switzerland. Publié dans Lecture notes in production engineering. Lien externe

Zhuang, T., Kandolo, C. J., & Mayer, J. R. R. (2026). A Spindle Mounted Measuring Head for Five-axis Machine Tool Volumetric Error Measurements Based on Stereo Vision for R-test Type Measurement. Procedia CIRP, 139, 13-16. Présentée à 13th CIRP Global Web Conference (CIRPe 2025). Lien externe