 | Monter d'un niveau |
Daniel TherriaultDépartement de génie mécanique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Liétard, Y., Therriault, D., & Mélançon, D. (2024). Exploiting Geometric Frustration in Coupled von Mises Trusses to Program Multifunctional Mechanical Metamaterials. Advanced Engineering Materials. Lien externe
Malfajani, R. S., Damansabz, R., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2024). 3D-printed encapsulated dielectric resonator antennas with large operation frequency ratio for future wireless communications. IEEE Open Journal of Antennas and Propagation, 14 pages. Lien externe
Zhang, C., Wang, C.-S., Girard, M., Therriault, D., & Heuzey, M.-C. (2024). 3D printed protein/polysaccharide food simulant for dysphagia diet: Impact of cellulose nanocrystals. Food Hydrocolloids, 148(A), 109455 (15 pages). Lien externe
Pierre, J., Verville, M., Chenier, G., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2024). Non-planar material-extrusion additive manufacturing of multifunctional sandwich structures using carbon-reinforced polyetheretherketone (PEEK). Additive Manufacturing, 84, 104124 (13 pages). Lien externe
Lingua, A., Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (2024). X-Ray Tomography-Based Characterization of the Porosity Evolution in Composites Manufactured by Fused Filament Fabrication. Experimental Mechanics. Lien externe
Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (2023). Performance of painted and non-painted non-woven nickel-coated carbon fibers for lightning strike protection of composite aircraft. Composites Part A: Applied Science and Manufacturing, 175, 107772 (11 pages). Accès restreint
Lingua, A., Sosa-Rey, F., Pautard, S., Therriault, D., & Lévesque, M. (2023). Multiscale characterization of the fracture mechanics of additively manufactured short fiber-reinforced composites. Engineering Fracture Mechanics, 289, 109343 (19 pages). Accès restreint
Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Antenna for 5G Sub-6-GHz and mm-Wave Bands. IEEE Open Journal of Antennas and Propagation, 4, 614-625. Disponible
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal, 29(6), 1230-1239. Disponible
Baptista, J. C., Fotsing, É. R., Mardjono, J., Therriault, D., & Ross, A. (mai 2023). Acoustic modelling of 3D-printed hybrid materials: a preliminary study [Communication écrite]. NOISE-CON23, Grand Rapids, MI, USA. Publié dans NOISE-CON proceedings, 266(2). Lien externe
Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages). Accès restreint
Duchesne, O., Lessard, D., Therriault, D., & Gosselin, F. (mai 2023). Design optimization and 3D printing of a sandwich panel for a lunar rover frame [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A 3D-printed Encapsulated Dual Wide-Band Dielectric Resonator Antenna with Beam Switching Capability. IEEE Open Journal of Antennas and Propagation, 4, 492-505. Lien externe
Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications. Composites Science and Technology, 231, 9 pages. Lien externe
Pierre, J., Chenier, G., Verville, M., Chauvette, J. F., Farahani, R., Piccirelli, N., & Therriault, D. (juillet 2023). Additive Manufacturing Of A Non-planar Multifunctional Sandwich Panel [Affiche]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Lien externe
Farahani, R. D., Lévesque, M., & Therriault, D. (2023). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Lampron, O., Lingua, A., Therriault, D., & Lévesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 103369 (12 pages). Lien externe
Le Gentil, T., Therriault, D., & Kerbrat, O. (2023). A comprehensive methodology to support decision-making for additive manufacturing of short carbon-fiber reinforced polyamide 12 from energy, cost and mechanical perspectives. International Journal of Advanced Manufacturing Technology, 12 pages. Lien externe
Hia, I. L., Snyder, A. D., Turicek, J. S., Blanc, F., Patrick, J. F., & Therriault, D. (2023). Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing. Composites Science and Technology, 232, 109850 (10 pages). Lien externe
Arslan, D., Norton, E., Mihai, M., Lévesque, M./.T., & Therriault, D. (mai 2023). High-temperature thermoplastic composites reinforced with recycled carbon fibers and thermal black for Fused Filament Fabrication [Présentation]. Dans Thirty-Eight Polymer Processing Society Conference (PPS-38), St.Gallen, Switzerland. Lien externe
Le Gentil, T., Langot, J., Therriault, D., & Kerbrat, O. (mai 2023). Identifying efficient solutions for additive manufacturing of short carbon-fiber reinforced polyamide 6 from energy and mechanical perspectives [Communication écrite]. 30th CIRP Life Cycle Engineering Conference, New Brunswick, NJ. Publié dans Procedia CIRP, 116. Disponible
Goffin, A., Lennox, M. D., Raphael, W., Therriault, D., & Tavares, J. R. (2023). The impacts of post-processing treatments done under reactive and non-reactive atmospheres on the densification of binder jetting parts. Canadian Journal of Chemical Engineering, 11 pages. Lien externe
Pierre, J., Iervolino, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 10 pages. Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (juillet 2023). Mesoscale full-field measurements for 3D-printed composites under delamination [Présentation]. Dans 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Lien externe
Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages). Lien externe
Sosa-Rey, F., Vella, C., Lingua, A., Pierre, J., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Multiscale Fast Fourier Transform homogenization of additively manufactured fiber reinforced composites from component-wise description of morphology. Composites Science and Technology, 243, 110261 (16 pages). Lien externe
Chauvette, J.-F., Hia, I. L., Farahani, R. D., Plante, R., Piccirelli, N., & Therriault, D. (2023). Non-planar multinozzle additive manufacturing of thermoset composite microscaffold networks. Composites Part B: Engineering, 256, 110627 (11 pages). Lien externe
Chauvette, J.-F., Hia, I. L., Pierre, J., Chenier, G., Farahani, R. D., Piccirelli, N., & Therriault, D. (2023). Non-Planar Multiprocess Additive Manufacturing of Multifunctional Composites. Advanced Materials Technologies, 8(17), 10 pages. Lien externe
Lampron, O., Therriault, D., & Lévesque, M. (2023). Phase-field modeling of fracture in fused filament fabricated thermoplastic parts and experimental validation. Engineering Fracture Mechanics, 292, 109667 (19 pages). Lien externe
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2023). Processing and properties of aqueous protein/polysaccharide mixture-based inks for additive manufacturing. Additive Manufacturing, 78, 103844 (12 pages). Lien externe
Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Desautels, A., Lapalme, M., Sirois, F., & Therriault, D. (2023). Silver-based conductive coatings as lightning strike protection for composite aircraft. Results in Materials, 19, 10 pages. Disponible
Sosa-Rey, F., Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Thermo-viscoelastic multiscale homogenization of additively manufactured short fiber reinforced polymers from direct microstructure characterization. International Journal of Solids and Structures, 281, 13 pages. Lien externe
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 107742 (10 pages). Disponible
Rafiee, M., Granier, F., Tao, R., Bherer-Constant, A., Chenier, G., & Therriault, D. (2022). Multi-material, multi-Process, planar, and nonplanar additive manufacturing of piezoelectric devices. Advanced Engineering Materials, 24(10), 2200294 (9 pages). Disponible
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022). Tunable thermally bistable multi-material structure. Applied Materials Today, 28, 101529 (14 pages). Disponible
Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Disponible
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages). Disponible
Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A., & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), 4851-4860. Disponible
Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445. Disponible
Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible
Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (juillet 2022). Additively manufactured thermally bistable structures [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Lien externe
Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Gosselin, F., Zou, S., & Therriault, D. (juillet 2022). Bioinspired transparent impact-absorbing composite made with a fluid mechanical instability [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Non disponible
Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). A comparative study on the performance of nickel-based technologies for lightning strike protection of composite aircraft [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Le Gentil, T., Therriault, D., & Kerbrat, O. (juin 2022). Energy efficiency-oriented decision-making for additive manufacturing with carbon-fibre-reinforced polyamide 12 [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (juin 2022). In-situ full-field measurements for 3D printed composites under interlayer delamination [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages). Lien externe
Tao, R., Granier, F., & Therriault, D. (2022). Multi-material freeform 3D printing of flexible piezoelectric composite sensors using a supporting fluid. Additive Manufacturing, 60, 103243 (11 pages). Lien externe
Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A., & Therriault, D. (2022). Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications. Applied Materials Today, 29, 10 pages. Lien externe
Costa-Baptista, J., Fotsing, E. R., Mardjano, J., Therriault, D., & Ross, A. (juillet 2022). Multilayered microchannels for high absorption at different frequency ranges [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022). Non disponible
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Pierre, J., Chenier, G., Farahani, R. D., & Therriault, D. (2022). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2022). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645. Lien externe
Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). Silver-based conductive materials for lightning strike protection of aircraft composite structures [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). Supplementary material for 'In-situ full-field measurements for 3D printed polymers during mode I interface failure' [Ensemble de données]. Lien externe
Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Rafiee, M., Granier, F., & Therriault, D. (2021). Advances in coaxial additive manufacturing and applications. Advanced Materials Technologies, 6(11), 2100356. Disponible
Chauvette, J.-F., Brzeski, D., Hia, I. L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021). High-speed multinozzle additive manufacturing and extrusion modeling of large-scale microscaffold networks. Additive Manufacturing, 47, 102294 (11 pages). Disponible
Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B. D., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173. Disponible
Trofimov, A., Le-Pavic, J., Therriault, D., & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, 162-169. Disponible
Zou, S., Therriault, D., & Gosselin, F. (2021). Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths. Extreme Mechanics Letters, 43, 101208 (9 pages). Disponible
Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages). Disponible
Farahani, R. D., Brzeski, D., Hia, I. L., Diouf-Lewis, A., Piccirelli, N., & Therriault, D. (septembre 2021). 3D printing of abradable polymer composite materials: Materials formulations and characterization [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Pierre, J., Iervolino, F., Piccirelli, N., & Therriault, D. (septembre 2021). Additive manufacturing of composite sandwich panels for acoustic applications [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Piccirelli, N., Therriault, D., Otero Navas, I., Diouf Leiws, A., Iervolino, F., & Abderrafai, Y. (2021). Composition for additive manufacturing. [Composition pour fabrication additive]. (Demande de brevet no CA3078975). Lien externe
Therriault, D., & Farahani, R. D. (novembre 2021). Design of multifunctional composites and their advanced additive manufacturing [Communication écrite]. Additive Fabrication of Composites (ADDFABCONF 2021). Lien externe
Brzeski, D., Hia, I. L., Chauvette, J.-F., Farahani, R. D., Piccirelli, N., Ross, A., & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages. Lien externe
Lampron, O., Therriault, D., & Lévesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages. Lien externe
Yazdani Sarvestani, H., Akbarzadeh, A. H., Therriault, D., & Lévesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 113705 (13 pages). Lien externe
Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (septembre 2021). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Hu, S., Lingua, A., Lengaigne, J., Lévesque, M., Therriault, D., Walch, D., & Tabiai, I. (juin 2021). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Résumé]. Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada. Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D., & Ross, A. (août 2021). Multilayer treatment for subwavelength and broad absorption [Communication écrite]. 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA. Lien externe
Abderrefai, Y., Farahani, R. D., & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Pierre, J., Verville, M., Farahani, R. D., & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Latko-Durałek, P., Santonja Soto, F., & Therriault, D. (septembre 2021). A safe green ink for solvent-cast 3D printing [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites [Communication écrite]. International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US. Non disponible
Toloup, C., Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites. (Rapport technique). Non disponible
Zou, S., Therriault, D., & Gosselin, F. (2020). Spiderweb-inspired, transparent, impact-absorbing composite. Cell Reports Physical Science, 1(11), 100240 (17 pages). Disponible
Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A., & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method. [Panneau acoustique et procédé de fabrication associé]. (Demande de brevet no CA3084631). Lien externe
Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Diouf-Lewis, A., Mastromatteo, L., Farahani, R. D., Piccirelli, N., & Therriault, D. (novembre 2020). Characterization and additive manufacturing of aerospace-grade thermoplastics composites [Communication écrite]. 7th Global Conference on Polymer and Composite Materials (PCM 2020). Non disponible
Piccirelli, N., Bazin, B., Therriault, D., Lafrance, T., & Trudeau Lalonde, F. (2020). Extruder head for additive manufacturing, system and process for additive manufacturing. [Tête d'extrusion pour fabrication additive, système et procédé de fabrication additive]. (Brevet no CA3041017). Lien externe
Rafiee, M., Farahani, R. D., & Therriault, D. (2020). Multi-Material 3D and 4D Printing: A Survey. Advanced Science Letters, 7(12), 1902307 (26 pages). Lien externe
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Pierre, J., Farahani, R. D., & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Brzeski, D., Farahani, R. D., & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Lebedev, O., Trofimov, A., Lévesque, M., & Therriault, D. (2020). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Wei, H., Cauchy, X., Navas, I. O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J., & Therriault, D. (2019). Direct 3D printing of hybrid nanofiber-based nanocomposites for highly conductive and shape memory applications. ACS Applied Materials & Interfaces, 11(27), 24523-24532. Disponible
Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-material direct ink writing (DIW) for complex 3D metallic structures with removable supports. ACS Applied Materials & Interfaces, 11(8), 8499-8506. Disponible
Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Demande de brevet no US20190054536). Lien externe
Iervolino, F., Pierre, J., Piccirelli, N., & Therriault, D. (août 2019). Additive manufacturing of composite sandwich panels for broadband sound absorption [Présentation]. Dans International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2. (Rapport technique). Non disponible
Rajesh, P. S. M., Delaroa, C., Gagne, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212. Lien externe
Cusson, E., Akbarzadeh, A. H., Therriault, D., & Rodrigue, D. (2019). Density graded polyethylene foams: Effect of processing conditions on mechanical properties. Cellular Polymers, 38(1-2), 3-14. Lien externe
Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (août 2019). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Farahani, R. D., & Therriault, D. (juillet 2019). Design of multifunctional composites and their multi-material additive manufacturing [Résumé]. International Conference on Advances in Functional Materials, Washington, DC, United States. Lien externe
Therriault, D., & Farahani, R. D. (août 2019). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages. Lien externe
Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding [Ensemble de données]. Lien externe
Costa-Baptista, J., Fotsing, E. R., Therriault, D., & Ross, A. (juillet 2019). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. Lien externe
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Pierre, J., Farahani, R. D., & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Farahani, R. D., Hia, I. L., Chauvette, J.-F., Gregorio, P., Brzeski, D., & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Demande de brevet no US20190284423). Lien externe
Chauvette, J.-F., Piccirelli, N., & Therriault, D. (octobre 2019). Rapid direct deposition of filled polymer on non-planar surface [Communication écrite]. 30th International Conference on Adaptive Structures and Technologies (ICAST 2019), Montréal, Qc, Canada. Lien externe
Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Mirabolghasemi, A., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2019). Thermal conductivity of architected cellular metamaterials. ACTA Materialia, 174, 61-80. Lien externe
Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269. Disponible
Zou, S., Therriault, D., & Gosselin, F. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), 9777-9785. Disponible
Niknam, H., Akbarzadeh, H., Therriault, D., & Rodrigue, D. (mai 2018). Mechanical Analysis Of Multi-Directional Functionally Graded Cellular Plates [Communication écrite]. Canadian Society for Mechanical Engineering International Congress (CSME 2018), Toronto, ON, Canada. Publié dans Progress in Canadian Mechanical Engineering. Lien externe
Mirabolghasemi, A., Akbarzadeh, H., Rodrigue, D., & Therriault, D. (2018). Thermal Conductivity Of Advanced Architected Cellular Materials. Progress in Canadian Mechanical Engineering, -. Lien externe
Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. Lien externe
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (mai 2018). 3D printing of metallic structures from a green ink [Communication écrite]. CSME International Congress, Toronto, Ontario, Canada. Lien externe
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S., & Mahdavi, M. (2018). Additive Manufacturing of Multifunctional Nanocomposites and Composites II. Dans Beaumont, P. W. R., & Zweben, C. H. (édit.), Comprehensive Composite Materials II (p. 380-407). Lien externe
Therriault, D. (janvier 2018). Advanced additive manufacturing of multifunctional composites [Communication écrite]. Gordon Research Conference, Symposium on Multifunctional materials (GRC 2018), Ventura, United States. Non disponible
Farahani, R. D., & Therriault, D. (octobre 2018). Advanced additive manufacturing of multifunctional composites [Communication écrite]. Society of Engineering Science (SES 2018), Madrid, Spain. Non disponible
Niknam, H., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2018). Architected multi-directional functionally graded cellular plates. Materials and Design, 148, 188-202. Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). Lien externe
Rajesh, P. S. M., Sirois, F., & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Materials and Design, 139, 45-55. Lien externe
Therriault, D., & Chizari, K. (2018). Electrically conductive ink for solvent-cast 3D printing. (Demande de brevet no US20180022023). Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (2018). Hybrid Carbon-Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity. Advanced Engineering Materials, 20(12). Lien externe
Tabiai, I., Delorme, R., Therriault, D., & Lévesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467. Lien externe
Diehl, P., Tabiai, I., Baumann, F. W., Therriault, D., & Lévesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26. Lien externe
Che, H., Gagné, M., Rajesh, P. S. M., Sapieha, J.-E., Sirois, F., Therriault, D., & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211. Lien externe
Wu, Q., Therriault, D., & Heuzey, M.-C. (2018). Processing and properties of chitosan inks for 3D printing of hydrogel microstructures. ACS Biomaterials Science & Engineering, 4(7), 2643-2652. Lien externe
Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (2017). Synthesis of highly conductive, uniformly silver coated carbon nanofibers by electroless deposition. ACS Applied Materials & Interfaces, 9(34), 29010-29020. Disponible
Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Disponible
Chizari, K., Arjmand, M., Liu, Z., Sundararaj, U., & Therriault, D. (2017). Three-dimensional printing of highly conductive polymer nanocomposites for EMI shielding applications. Materials Today Communications, 11, 112-118. Disponible
Bodkhe, S., Testoni, O., Gosselin, F., & Therriault, D. (octobre 2017). 3D printing active piezoelectric sensors in a single step [Communication écrite]. 8th New Mech, Boston, MA, USA. Non disponible
Abderrafai, Y., Barthelat, F., & Therriault, D. (juillet 2017). 3D printing of bioinspired functionally graded composites [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Wu, Q., Heuzey, M.-C., & Therriault, D. (juillet 2017). 3D printing of chitosan-based nanocomposites for electronic applications [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M.-C. (2017). 3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth. Advanced Biosystems, 1(6), 1700058 (6 pages). Lien externe
Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Mac Murray, B. C., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017). Click chemistry stereolithography for soft robots that self-heal. Journal of Materials Chemistry B, 5(31), 6249-6255. Lien externe
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (juillet 2017). Dense metallic structure fabrication through 3D printing of metallic inks and subsequent metal sintering [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Gosselin, F., Zou, S., & Therriault, D. (août 2017). Failure mechanisms of instability-assisted 3D printed microstructured fibers [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Lien externe
Zou, S., Zulkifli, H. Z., Therriault, D., & Gosselin, F. (juillet 2017). Failure mechanisms of poly(lactic acid) fibers featuring microstructured sacrificial bonds [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Zou, D., Therriault, D., & Gosselin, F. (septembre 2017). Finite element simulation of microstructured fibers with sacrificial bonds [Communication écrite]. International conference in aerospace for young scientists (ICAYS 2017), Beijing, China. Non disponible
Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2017). Metal 3D printing method and metallic 3D printing materials. (Demande de brevet no CA2976782). Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (avril 2017). One-step piezoelectric sensors for smart textiles [Communication écrite]. 15th Expo Hightex, Montréal, Québec. Non disponible
Aïssa, B., Nedil, M., Belaidi, A., Isaifan, R. J., Bentouaf, A., Fauteux, C., & Therriault, D. (2017). Photoluminescence quenching, structures, and photovoltaic properties of ZnO nanostructures decorated plasma grown single walled carbon nanotubes. Journal of Nanoparticle Research, 19(5), 8 pages. Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (juillet 2017). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Wei, H., Cauchy, X., Abderrafai, Y., Leng, J., & Therriault, D. (juillet 2017). Solvent-cast 3D printing of superior conductive hybrid particles based nanocomposites [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2017). Solvent-cast based metal 3D printing and secondary metallic infiltration. Journal of Materials Chemistry C, 5(40), 10448-10455. Lien externe
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016). 3D printing of highly conductive nanocomposites for the functional optimization of liquid sensors. Small, 12(44), 6076-6082. Disponible
Farahani, R. D., Dubé, M., & Therriault, D. (2016). Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Advanced Materials, 28(28), 5794-5821. Disponible
Hughes, V., Tabiai, I., Chizari, K., & Therriault, D. (2016). 3D printable conductive nanocomposites of PLA and multi‑walled carbon nanotubes. Material Matters, 11(2), 61-63. Lien externe
Therriault, D. (février 2016). 3D printing of multifunctional composites and polymers [Communication écrite]. Gordon Research Conference, Symposium on Multifunctional materials, Ventura, USA. Non disponible
Mahdavi, H., Abderrafai, Y., Piccirelli, N., Pautard, S., & Therriault, D. (juillet 2016). Anisotropic properties of 3D printed nylon by fused deposition modelling technique [Communication écrite]. 6th International conference on engineering and applied sciences (ICEAS 2016), Vancouver, Canada. Non disponible
Abderrafai, Y., Barthelat, F., & Therriault, D. (août 2016). Design and 3D printing of polymer/ceramic composite structures [Affiche]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Non disponible
Bodkhe, S., Gosselin, F., & Therriault, D. (août 2016). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Farahani, R. D., Gagne, M., Sapieha, J.-E., & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. Lien externe
Dalir, H., Farahani, R. D., Hernandez, L., Aldebert, C., Lévesque, M., & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771. Lien externe
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (août 2016). Three-dimensional direct-write printing of metallic microstructures [Affiche]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Non disponible
Zou, S., Therriault, D., & Gosselin, F. (août 2016). Unfolding process of coiling fibers fabricated by instability-assisted fused deposition modeling [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), 831-845. Disponible
Arguin, M., Sirois, F., & Therriault, D. (2015). Electric field induced alignment of multiwalled carbon nanotubes in polymers and multiscale composites. Advanced Manufacturing: Polymer & Composites Science, 1(1), 16-25. Disponible
Guo, S.-Z., Yang, X., Heuzey, M.-C., & Therriault, D. (2015). 3D printing of a multifunctional nanocomposite helical liquid sensor. Nanoscale, 7(15), 6451-6456. Lien externe
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (juillet 2015). 3D printing of conductive nanocomposites for liquid sensor application [Communication écrite]. 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark. Lien externe
Bodkhe, S., & Therriault, D. (octobre 2015). 3D printing of nanocomposites for mechanical microsystems [Communication écrite]. S.NET 2015 : From Nanotechnologies to Emerging Technologies Towards a Global Responsibility, Montréal, Qc, Canada. Non disponible
Therriault, D. (novembre 2015). Design of multifunctional composites and their use for the 3D printing of microsystems [Communication écrite]. Composites at Lake Louise 2015, Lake Louise, Canada. Lien externe
Farahani, R. D., Sapieha, J.-E., & Therriault, D. (2015). Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing. Materials & Design, 88, 1175-1182. Lien externe
Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. (2015). Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds. Advanced Materials, 27(24), 3676-3680. Lien externe
Rajesh, P. S. M., Gagne, M., Cauchy, X., Sapieha, J.-E., Sirois, F., & Therriault, D. (juillet 2015). Lightning protection of wet metalized polymer composites [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
Najafi, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2015). Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal, 73, 455-465. Lien externe
Lanouette, A.-M., Potvin, M.-J., Martin, F., Houle, D., & Therriault, D. (2015). Residual mechanical properties of a carbon fibers/PEEK space robotic arm after simulated orbital debris impact. International Journal of Impact Engineering, 84, 78-87. Lien externe
Bodkhe, S., Gosselin, F., & Therriault, D. (juillet 2015). Three-dimensional printing of polyvinylidene fluoride nanocomposites [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
P S M, R., Cauchy, X., Gagne, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (mars 2015). Wet chemical metallization of aerospace composites as a lightning protection strategy [Communication écrite]. TMS 2015 Annual Meeting & Exhibition, Orlando, Florida. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Disponible
Farahani, R. D., Chizari, K., & Therriault, D. (2014). Three-dimensional printing of freeform helical microstructures: a review. Nanoscale, 6(18), 10470-10485. Disponible
Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650. Disponible
Farahani, R. D., Laberge Lebel, L., & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5), 055020 (12 pages). Disponible
Guo, S., Heuzey, M.-C., & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), 1142-1150. Disponible
Chizari, K., & Therriault, D. (novembre 2014). Conductive filaments from CNTs/PLA composites [Affiche]. ASME International Mechanical Engineering Congress & Exposition, Montréal, Québec. Non disponible
Passieux, R., Therriault, D., & Gosselin, F. (novembre 2014). Creation of Sacrificial Bonds by Viscous Flow Instability [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe
Lanouette, A. M., Potvin, M. J., Martin, F., Mondor, S., Houle, D., & Therriault, D. (avril 2014). Experimental Evaluation of the Canadarm2 Residual Flexural Strength After an Orbital Debris Impact [Communication écrite]. 13th European Conference on Spacecraft Structures, Materials & Environmental Testing, Braunschweig, Germany. Lien externe
Aissa, B., Hena-Zamal, H., Asgar-Khan, M., Haddad, E., Therriault, D., & Rosei, F. (octobre 2013). Fabrication of 3D micro-vascular network based carbon nanotube materials by the direct-write microfluidic infiltration approach for self healing applications [Communication écrite]. Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec. Non disponible
Chizari, K., & Therriault, D. (août 2014). Fabrication of Conductive Microfilaments and Liquid Sensor from CNTs/PLA Nanocomposites [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada. Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (septembre 2014). Highly conductive heterogeneous epoxy-Silver composites by phase selective in-Situ filler synthesis [Communication écrite]. 29th Annual Technical Conference of the American Society for Composites (ASC 2014); 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting, La Jolla, San Diego, CA, United states. Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (octobre 2014). In-situ formation of conduction networks in highly conductive heterogeneous epoxy-silver composites [Communication écrite]. Composites and Advanced Materials Expo (CAMX 2014), Orlando, Florida. Non disponible
Talwar, B. S., Guo, S., Chizari, K., & Therriault, D. (novembre 2014). Investigation of carbon nanotubes mixing methods and functionalizations for electrically conductive polymer composites [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Montréal, Québec (5 pages). Lien externe
Gagné, M., & Therriault, D. (2014). Lightning strike protection of composites. Progress in Aerospace Sciences, 64, 1-16. Lien externe
Dermanaki-Farahani, R., Laberge Lebel, L., & Therriault, D. (2014). Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration. Journal of Visualized Experiments (85). Lien externe
Bodkhe, S., Gosselin, F., & Therriault, D. (novembre 2014). Three-dimensional structures with polyvinylidene fluoride [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec. Non disponible
Guo, S., Gosselin, F., Guérin, N., Lanouette, A.-M., Heuzey, M.-C., & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), 4118-4122. Disponible
Moussaddy, H., Therriault, D., & Lévesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), 3817-3828. Disponible
Aïssa, B., Nedil, M., Habib, M. A., Haddad, E., Jamroz, W., Therriault, D., Coulibaly, Y., & Rosei, F. (2013). Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency. Applied Physics Letters, 103(6), 063101 (5 pages). Disponible
Lanouette, A.-M., Hill, J., Demers-Dussault, P., Laurin, J.-J., & Therriault, D. (mai 2013). 3D printing of double KA band helical micro-antennas [Communication écrite]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states. Lien externe
Guerin, N., Lévesque, M., & Therriault, D. (mai 2013). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique [Communication écrite]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states. Lien externe
Arguin, M., Sirois, F., & Therriault, D. (septembre 2013). Electric field alignement of multi-wall carbon nanotubes in epoxy matrix in order to establish preferential current path flows [Communication écrite]. Composites Week@Leuven, Leuven, Belgium. Non disponible
Farahani, R. D., & Therriault, D. (juillet 2013). Electrical conductivity of hybrid/patterned nanocomposites films [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Arguin, M., Sirois, F., & Therriault, D. (juillet 2013). Impact of carbon nanotubes on electrical conductivity of carbon fiber multiscale composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Farahani, R. D., Sapieha, J.-E., & Therriault, D. (septembre 2013). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution [Communication écrite]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. Lien externe
Chatel, T., Lévesque, M., & Therriault, D. (mai 2013). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications [Communication écrite]. 9th International conference on mechanics of time-dependent materials, Montréal, Québec. Non disponible
Aïssa, B., Therriault, D., Haddad, E., Jamroz, W., Tagziria, K., Loiseau, J., Higgins, A., Khan, M. A., & Hoa, S. V. (juin 2013). Mitigating the effects of space debris on composite structures embedding self healing and carbon nanotube nanocomposite materials [Communication écrite]. 4th International Conference on Self-Healing Materials, Ghent, Belgium. Lien externe
Moussaddy, H., Therriault, D., & Lévesque, M. (juillet 2013). Modeling elastic properties of randomly oriented fiber composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Guo, S. Z., Heuzey, M.-C., & Therriault, D. (juillet 2013). Solvent-cast direct-write microfabrication of thermoplastic-based nanocomposite structures [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Kruzelecky, R. V., Aïssa, B., Wong, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I. D., Hoa, S. V., Therriault, D., Ellery, A., Martel, S., & Jiang, X.-X. (juillet 2011). Project MoonDust: Characterization and Mitigation of Lunar Dust [Communication écrite]. 41st International Conference on Environmental Systems, Portland, Oregon. Disponible
Farahani, R. D., Pahlavanpour, M., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, 214-225. Disponible
Aïssa, B., Haddad, E., Jamroz, W., Hassani, S., Farahani, R. D., Merle, P. G., & Therriault, D. (2012). Micromechanical characterization of single-walled carbon nanotube reinforced ethylidene norbornene nanocomposites for self-healing applications. Smart Materials and Structures, 21(10), 105028. Disponible
Aïssa, B., Nedil, M., Esam, A. H., Tabet, N., Therriault, D., & Rosei, F. (2012). Ambipolar operation of hybrid SiC-carbon nanotube based thin film transistors for logic circuits applications. Applied Physics Letters, 101(4), 043121. Disponible
Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactions. Composites Science and Technology, 72(12), 1387-1395. Disponible
Aïssa, B., Therriault, D., Farahani, R. D., Laberge Lebel, L., & El Khakani, M. A. (2012). Electrical transport properties of single wall carbon nanotube/polyurethane composite based field effect transistors fabricated by UV-assisted direct-writing technology. Nanotechnology, 23(11), 115705 (8 pages). Disponible
Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8), 085502 (10 pages). Disponible
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2012). Preparation of Highly Exfoliated Polyester–Clay Nanocomposites: Process–Property Correlations. Langmuir, 28(1), 791-803. Disponible
Aïssa, B., Tabet, N., Nedil, M., Therriault, D., Rosei, F., & Nechache, R. (2012). Electromagnetic Energy Absorption Potential and Microwave Heating Capacity of Sic Thin Films in the 1-16 Ghz Frequency Range. Applied Surface Science, 258(14), 5482-5485. Lien externe
Therriault, D., Lewis, J. A., & White, S. R. (2012). Microcapillary networks. (Brevet no US8101139). Lien externe
Gosselin, F., Therriault, D., & Lévesque, M. (février 2012). Microfabrication of a spider-silk analogue through the liquid rope coiling instability [Communication écrite]. APS March Meeting, Boston, MA, USA. Lien externe
Farahani, R. D., Lévesque, M., & Therriault, D. (mars 2012). Nanocomposite materials in three-dimensional freestanding microsensors [Communication écrite]. NanoQuebec, Montréal, Québec. Non disponible
Aïssa, B., Therriault, D., Haddad, E., & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012, 1-17. Disponible
Guo, S.-Z., Heuzey, M.-C., & Therriault, D. (mars 2012). Solvent-cast direct-write microfabrication of thermoplastic polymer nanocomposites 3D structures [Communication écrite]. NanoQuebec, Montréal, Québec. Non disponible
Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919. Disponible
Laberge Lebel, L., & Therriault, D. (2011). Multiscale manufacturing of three-dimensional polymer-based nanocomposite structures. Dans Boreddy, R. (édit.), Advances in Diverse Industrial Applications of Nanocomposites (p. 409-428). Disponible
Moussaddy, H., Lévesque, M., & Therriault, D. (septembre 2011). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (juin 2011). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Aïssa, B., Haddad, E., Tagziria, K., Jamroz, W., Asgar-Khan, M., Hoa, S. V., Verreault, J., Higgins, A., & Therriault, D. (septembre 2011). Exploring self healing of CFRP laminates exposed to hypervelocity small pellets simulating space debris [Communication écrite]. 2nd Joint US-Canada Conference on Composites - American Society for Composites, 26th Annual Technical Conference: Canadian Association for Composite Structures and Materials, Montréal, QC, Canada. Lien externe
Aïssa, B., Therriault, D., Farahani, R. D., & Merle, P. (novembre 2011). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration [Communication écrite]. MRS Fall Meeting 2011, Boston, MA, USA. Non disponible
Assa, B., Nechache, R., Therriault, D., Rosei, F., & Nedil, M. (2011). High-frequency electromagnetic properties of epitaxial Bi 2FeCrO6 thin films grown by pulsed laser deposition. Applied Physics Letters, 99(18). Lien externe
Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (novembre 2010). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Communication écrite]. MRS Fall Meeting, Boston, MA. Publié dans MRS Proceedings, 1312. Lien externe
Aissa, B., Therriault, D., & El Khakani, M. A. (2011). On-substrate growth of single-walled carbon nanotube networks by an "all-laser" processing route. Carbon, 49(8), 2795-2808. Lien externe
Habib, M., El Khakani, M., Aïssa, B., Denidni, T., Laberge Lebel, L., & Therriault, D. (2011). Super-high-frequency shielding properties of excimer-laser-synthesized-single-wall-carbon-nanotubes/polyurethane nanocomposite films. Journal of Applied Physics, 109(8). Lien externe
Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (2010). Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams. Composites Science and Technology, 70(3), 518-524. Disponible
Farahani, R. D., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Présentation]. Dans ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia. Non disponible
Lévesque, M., Bui-Quoc, T., & Therriault, D. (2010). Final Report – Pratt & Whitney specialized bi-axial fatigue testing specimens. (Rapport technique). Non disponible
Farahani, R., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe
Kruzelecky, R., Wong, B., Aissa, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I., Hoa, S., Therriault, D., & Ellery, A. (juillet 2010). MoonDust Lunar Dust Simulation and Mitigation [Communication écrite]. 40th International Conference on Environmental Systems, Barcelona, Spain. Lien externe
Kuhn, M., Napporn, T. W., Meunier, M., & Therriault, D. (2010). Single-chamber micro solid oxide fuel cells: Study of anode and cathode materials in coplanar electrode design. Solid State Ionics, 181(5-7), 332-337. Lien externe
Lévesque, M., Bui-Quoc, T., Therriault, D., & Lourdel, N. (2010). Task 1 Report – Bi-axial fatigue setup and testing for Pratt & Whitney US. (Rapport technique). Non disponible
Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2010). Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils. Advanced Materials, 22(5), 592-596. Lien externe
Dalir, H., Farahani, R. D., Lévesque, M., & Therriault, D. (novembre 2010). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe
Kuhn, M., Napporn, T. W., Meunier, M., Vengallatore, S., & Therriault, D. (2009). Miniaturization limits for single-chamber micro-solid oxide fuel cells with coplanar electrodes. Journal of Power Sources, 194(2), 941-949. Disponible
Laberge Lebel, L., Aïssa, B., Paez, O. A., El Khakani, M. A., & Therriault, D. (2009). Three-dimensional micro structured nanocomposite beams by microfluidic infiltration. Journal of Micromechanics and Microengineering, 19(12), 125009. Disponible
Lourdel, N., Therriault, D., & Lévesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9), 095017 (7 pages). Disponible
Fauteux, C., Khakani, M. A. E., Pegna, J., & Therriault, D. (2009). Influence of solution parameters for the fast growth of ZnO nanostructures by laser-induced chemical liquid deposition. Applied Physics A, 94(4), 819-829. Disponible
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2009). CMOS based capacitive sensor laboratory-on-chip: A multidisciplinary approach. Analog Integrated Circuits and Signal Processing, 59(1), 1-12. Lien externe
Ghafar-Zadeh, E., Sawan, M., Therriault, D., Rajagopalan, S., & Chodavarapu, V. P. (2009). A direct-write microfluidic fabrication process for CMOS-based lab-on-chip applications. Microelectronic Engineering, 86(10), 2104-2109. Lien externe
Fauteux, C., Smirani, R., Pegna, J., El Khakani, M. A., & Therriault, D. (mai 2008). Fast synthesis of ZnO nanostructures by laser-induced chemical liquid deposition [Communication écrite]. European Material Research Society Spring Meeting 2008 - Symposium B: Laser and Plasma in Micro- and Nano-Scale Materials Processing and Diagnostics, Strasbourg, France. Publié dans Applied Surface Science, 255(10). Lien externe
Laberge Lebel, L., Therriault, D., El-Khakani, M. A., & Aissa, B. (2009). Methods for preparing freeform three-dimensional structures. (Demande de brevet no US20090101278). Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2009). A microfluidic packaging technique for lab-on-chip applications. IEEE Transactions on Advanced Packaging, 32(2), 410-416. Lien externe
Aissa, B., Fauteux, C., Khakani, M. A. E., & Therriault, D. (2009). Structural and photoluminescence properties of laser processed ZnO/carbon nanotube nanohybrids. Journal of Materials Research, 24(11), 3313-3320. Lien externe
Laberge Lebel, L., Aissa, B., Khakani, M. A. E., & Therriault, D. (avril 2009). Ultraviolet-assisted direct-write fabrication of three-dimensional microstructures [Communication écrite]. MRS Spring Meeting, Boston, MA, USA. Non disponible
Kuhn, M., Rao, R. B., & Therriault, D. (avril 2009). Viscoelastic inks for direct-write microfabrication of single-chamber micro solid oxide fuel cells with coplanar thick electrodes [Communication écrite]. Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography, San Francicso, CA, United states. Lien externe
Lévesque, M., Therriault, D., & Nowlan, I. (2009). Wedge clamp verification testing. (Rapport technique). Non disponible
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2008). A 0.18-μm CMOS capacitive sensor Lab-on-Chip. Sensors and Actuators A: Physical, 141(2), 454-462. Lien externe
Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M., & Therriault, D. (2008). Direct-Dispense Polymeric Waveguides Platform for Optical Chemical Sensors. Sensors, 8(12), 7636-7648. Disponible
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2008). Direct-Write Microfabrication of Single-Chamber Micro Solid Oxide Fuel Cells. Journal of Micromechanics and Microengineering, 18(1), 015005. Lien externe
Hajj-Hassan, M., Gonzalez, T., Djeghelian, H., Ghafar-Zadeh, E., Therriault, D., Chodavarapu, V., & Andrews, M. (janvier 2008). Direct-write patterning of nanostructured sensory waveguides for integrated optical bioimaging applications [Communication écrite]. Nanoscale Imaging, Sensing, and Actuation for Biomedical Applications V, San Jose, CA, United states. Lien externe
Kuhn, M., Napporn, T. W., Meunier, M., & Therriault, D. (2008). Experimental Study of Current Collection in Single-Chamber Micro Solid Oxide Fuel Cells With Comblike Electrodes. Journal of The Electrochemical Society, 155(10), B994-B1000. Lien externe
Kuhn, M., Napporn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2008). Fabrication and Testing of Coplanar Single-Chamber Micro Solid Oxide Fuel Cells With Geometrically Complex Electrodes. Journal of Power Sources, 177(1), 148-153. Lien externe
Bey-Oueslati, R., Palm, S. J., Therriault, D., & Martel, S. (2008). High speed direct-write for rapid fabrication of three-dimensional microfluidic devices. International Journal of Heat and Technology, 26(1), 125-131. Lien externe
Ghafar-Zadeh, E., Sawan, M., Therriault, D., & Miled, A. (2008). Laboratoires-sur-puces: Une nouvelle technologie de diagnostic cellulaire et moléculaire. Lien externe
Longtin, R., Fauteux, C., Carignan, L. P., Therriault, D., & Pegna, J. (2008). Laser-Assisted Synthesis of Carbon Nanofibers: From Arrays to Thin Films and Coatings. Surface and Coatings Technology, 202(12), 2661-2669. Lien externe
Bruneaux, J., Therriault, D., & Heuzey, M.-C. (2008). Micro-Extrusion of Organic Inks for Direct-Write Assembly. Journal of Micromechanics and Microengineering, 18(11), 115020-115020. Lien externe
Oueslati, R. B., Therriault, D., & Martel, S. (2008). PCB-Integrated Heat Exchanger for Cooling Electronics Using Microchannels Fabricated With the Direct-Write Method. IEEE Transactions on Components and Packaging Technologies, 31(4), 869-874. Lien externe
Laberge-Label, L., Aissa, B., El Khnakani, M. A., & Therriault, D. (juillet 2008). Single-walled carbon nanotubes/polymer nanocomposites microbeams by Means of ultraviolet-assisted direct-write assembly [Communication écrite]. 7th Joint Canada-Japan Workshop on Composites, Kanagawa, Japan. Non disponible
Aïssa, B., Laberge Lebel, L., Therriault, D., & El Khakani, M. A. (mai 2008). Synthèse contrôlée des nanotubes de carbone monoparois par l'approche plasma/laser pour l'élaboration de nanocomposites NTC-Polymère [Communication écrite]. 76e Congrès de l'ACFAS, Québec, QC, Canada. Non disponible
Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (novembre 2007). 3D reinforced SWCNT-polymer nanocomposite beams by means of microfluidic infiltration [Communication écrite]. MRS Fall Meeting, Boston, Ma.. Non disponible
Therriault, D. (2007). Biosensors : Filling the gap. Nature Nanotechnology, 2(7), 393-394. Lien externe
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (août 2007). Direct-write microfabrication and testing of solid oxide micro fuel cells [Communication écrite]. 13th Canadian Semiconductor Technology Conference, Montréal, Québec. Non disponible
Kuhn, M., Napportn, T., Meunier, M., Vengallatore, S., & Therriault, D. (avril 2007). Fabrication and characterization of single-chamber micro-solid oxide fuel cells with interdigitated electrodes [Communication écrite]. Hydrogen and Fuel Cells 2007 : International Conference and Trade Show, Vancouver, BC. Non disponible
Fauteux, C., Longtin, R., Pegna, J., & Therriault, D. (2007). Fast Synthesis of ZnO Nanostructures by Laser-Induced Decomposition of Zinc Acetylacetonate. Inorganic Chemistry, 46(26), 11036-11047. Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2007). Novel Direct-Write Cmos-Based Laboratory-on-Chip: Design, Assembly and Experimental Results. Sensors and Actuators A: Physical, 134(1), 27-36. Lien externe
Therriault, D., White, S. R., & Lewis, J. A. (2007). Rheological behavior of fugitive organic inks for direct-write assembly. Applied Rheology, 17(1), 10112-10121. Disponible
Longtin, R., Carignan, L. P., Fauteux, C., Therriault, D., & Pegna, J. (2007). Selective Area Synthesis of Aligned Carbon Nanofibers by Laser-Assisted Catalytic Chemical Vapor Deposition. Diamond and Related Materials, 16(8), 1541-1549. Lien externe
Kuhn, M., Napportn, T., Meunier, M., Therriault, D., & Vengallatore, S. (novembre 2007). Single-chamber solid-oxide micro fuel cells with geometrically-complex electrodes [Communication écrite]. MRS Fall Meeting, Boston, Ma.. Non disponible
Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (octobre 2007). Three-dimensional (3D) microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Communication écrite]. Polymer nanocomposites 2007, Montréal, Québec. Non disponible
Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (décembre 2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach [Communication écrite]. Crepec 2007, Montréal, Québec. Lien externe
Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (octobre 2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Communication écrite]. Simha Symposium on Polymer Physics and Polymer Nanocomposites, Montréal, Québec. Non disponible
Zadeh, E. G., Sawan, M., Jalali, M., & Therriault, D. (août 2006). CMOS-Based capacitive sensor array dedicated to microfluidic studies [Communication écrite]. International Workshop on Computer Architecture for Machine Perception and Sensing (CAMP 2006), Montréal, Québec. Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (mai 2006). Direct-write CMOS-based Laboratory-On-Chip [Communication écrite]. NSTI Nanotechnology Conference and Trade Show (NSTI Nanotech 2006), Boston, USA. Non disponible
Kuhn, M., Napporn, T., Meunier, M., Therriault, D., & Vengallatore, S. (novembre 2006). Direct-Write Microfabrication of Single-Chamber Solid Oxide Fuel Cells with Interdigitated Electrodes [Communication écrite]. MRS Fall Meeting, Boston, Ma.. Lien externe
Palm, S., Bey-Oueslati, R., Martel, S., & Therriault, D. (décembre 2006). Fabrication de microcaloducs à section triangulaire par écriture directe [Communication écrite]. 3rd Microfluidics French Conference (Microfluidics 2006), Toulouse, France. Non disponible
Bey-Oueslati, R., Palm, S., Therriault, D., & Martel, S. (décembre 2006). High-speed direct-write for rapid fabrication of three-dimensional microfluidic devices [Communication écrite]. 3rd Microfluidics French Conference, Toulouse, France. Non disponible
Bey-Oueslati, R., Therriault, D., & Martel, S. (octobre 2006). Micro heat pipe fabrication : high performance deposition platform for electronic industry [Communication écrite]. 5th International Workshop on Microfactories, Besançon, France. Non disponible
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (octobre 2006). Microelectrofluidic packaging for CMOS based laboratory-on-chips [Communication écrite]. International Electronics Packaging Symposium, Nyskayuna, N.Y.. Non disponible
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (mai 2006). Microfabrication de piles SOFC à chambre unique par écriture directe [Communication écrite]. 74e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Ghafer-Zadeh, E., Sawan, M., & Therriault, D. (novembre 2005). Direct-write fabrication of microchannel dedicated to CMOS-based lab-on-chip applications [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2005), Orlando, FL. Lien externe
Therriault, D., Shepherd, R. F., White, S. R., & Lewis, J. A. (2005). Fugitive Inks for Direct-Write Assembly of Three-Dimensional Microvascular Networks. Advanced Materials, 17(4), 395-399. Lien externe
Therriault, D., Shepherd, R., Lewis, J., & White, S. (novembre 2004). Fugitive inks for direct-write assembly of complex three-dimensional microvascular networks [Communication écrite]. Symposium on materials issues in solid freeforming (2004 MRS Fall meeting), Boston. Lien externe
