 | Monter d'un niveau |
Beglarzadeh, B., & Mayer, J. R. R. (2024). Sensorless loaded test for machine tool 2D compliance characterization using a tool-mounted roller bearing. Journal of Manufacturing Processes, 111, 151-165. Lien externe
Latulippe, M., Khameneifar, F., & Mayer, J. R. R. (mai 2023). Correction of the systematic errors of 3D scanner measurements by data fusion with CMM data [Communication écrite]. International Congress of the Canadian Society of Mechanical Engineering (CSME 2023), Sherbrooke, QC, Canada. Non disponible
Ngoc, H. V., Mayer, J. R. R., & Bitar-Nehme, E. (2023). Deep Learning to Directly Predict Compensation Values of Thermally Induced Volumetric Errors. Machines, 11(4), 16 pages. Lien externe
Gao, W., Ibaraki, S., Donmez, M. A., Kono, D., Mayer, J. R. R., Chen, Y.-L., Szipka, K., Archenti, A., Linares, J.-M., & Suzuki, N. (2023). Machine tool calibration: Measurement, modeling, and compensation of machine tool errors. International Journal of Machine Tools and Manufacture, 187, 61 pages. Lien externe
Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (juillet 2021). Prompt uncertainty estimation with GUM framework for on-machine tool coordinate metrology [Communication écrite]. 15th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2021), Gulf on Naples, Italy (5 pages). Publié dans Procedia CIRP, 112. Lien externe
Mechta, A., Slamani, M., Zaoui, M., Mayer, J. R. R., & Chatelain, J.-F. (2022). Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools. International Journal of Advanced Manufacturing Technology, 120(7-8), 5093-5115. Lien externe
Ngoc, H. V., Mayer, J. R. R., & Bitar-Nehme, E. (2022). Deep learning LSTM for predicting thermally induced geometric errors using rotary axes powers as input parameters. CIRP Journal of Manufacturing Science and Technology, 37, 70-80. Lien externe
Beglarzadeh, B., Mayer, J. R. R., & Archenti, A. (2022). Estimation of an elasto-geometric model exploiting a loaded circular test on a machine tool. International Journal of Advanced Manufacturing Technology, 123(7-8), 2331-2349. Lien externe
Bernard, G., Achiche, S., Girard, S., & Mayer, J. R. R. (2021). Condition monitoring of manufacturing processes under low sampling rate. Journal of Manufacturing and Materials Processing, 5(1), 26 (14 pages). Disponible
Bonin, R., Khameneifar, F., & Mayer, J. R. R. (2021). Evaluation of the Metrological Performance of a Handheld 3D Laser Scanner Using a Pseudo-3D Ball-Lattice Artifact. Sensors, 21(6), 2137 (18 pages). Disponible
Esmaeili, S. M., & Mayer, J. R. R. (2021). CNC table based compensation of inter-axis and linear axis scale gain errors for a five-axis machine tool from symbolic variational kinematics. CIRP Annals, 70(1), 439-442. Lien externe
Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2021). Efficient uncertainty estimation of indirectly measured geometric errors of five-axis machine tools via Monte-Carlo validated GUM framework. Precision Engineering, 67, 160-171. Lien externe
Esmaeili, S., Mayer, J. R. R., Sanders, M., Dahlem, P., & Xing, K. (2021). Five-axis machine tool volumetric and geometric error reduction by indirect geometric calibration and lookup tables. Journal of Manufacturing Science and Engineering, 143(7), 28 pages. Lien externe
Sepahi-Boroujeni, S., Mayer, J. R. R., Khameneifar, F., & Wozniak, A. (2021). A full-covariance uncertainty assessment in on-machine probing. International Journal of Machine Tools and Manufacture, 167, 12 pages. Lien externe
Beglarzadeh, B., Mayer, J. R. R., & Archenti, A. (2021). Modelling and indirect measurement of machine tool equivalent joint compliances. CIRP Journal of Manufacturing Science and Technology, 35, 882-895. Lien externe
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelin, J.-F., & Achiche, S. (mars 2021). Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters [Communication écrite]. 14th International Conference & Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2021) (10 pages). Lien externe
Esmaeili, S., & Mayer, J. R. R. (2020). An integrated geometric and hysteretic error model of a three axis machine tool and its identification with a 3D telescoping ball-bar. Journal of Manufacturing and Materials Processing, 4(1), 14 pages. Disponible
Esmaeili, S. M., & Mayer, J. R. R. (2020). Generation of a 3D error compensation grid from ISO 230-1 error parameters obtained by a SAMBA indirect calibration and validated by a ball-bar spherical test. International Journal of Advanced Manufacturing Technology, 106(11-12), 4649-4662. Lien externe
Xing, K., Mayer, J. R. R., & Achiche, S. (2020). Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors. International Journal of Automation Technology, 14(3), 369-379. Lien externe
Xing, K., Liu, X., Liu, Z., Mayer, J. R. R., & Achiche, S. (octobre 2020). Low-Cost Precision Monitoring System of Machine Tools for SMEs [Communication écrite]. 8th CIRP Global Web Conference on Flexible Mass Customisation (CIRPe 2020). Publié dans Procedia CIRP, 96. Lien externe
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (octobre 2019). Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures [Communication écrite]. 7th CIRP Global Web Conference (CIRPe 2019), Berlin, Germany. Publié dans Procedia CIRP, 86. Lien externe
Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2020). Repeatability of on-machine probing by a five-axis machine tool. International Journal of Machine Tools and Manufacture, 152, 19 pages. Lien externe
Hashemiboroujeni, H., Esmaeili Marzdashti, S., Xing, K., & Mayer, J. R. R. (2019). Five-axis machine tool coordinate metrology evaluation using the ball dome artefact before and after machine calibration. Journal of Manufacturing and Materials Processing, 3(1), 20 (12 pages). Disponible
Xing, K., Mayer, J. R. R., & Achiche, S. (juin 2019). Application of EWMA control chart on volumetric errors change recognition [Communication écrite]. Joint CSME-CFDSC International Congress, London, ON. Lien externe
Xing, K., Achiche, S., & Mayer, J. R. R. (décembre 2018). The Effects of Machine Tool Pallet Change on Machine Tool Geometric Measurement Using the Scale and Master Ball Artefact Method (SAMBA) [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019). Five-axis machine tool fault monitoring using volumetric errors fractal analysis. CIRP Annals, 168(1), 555-558. Lien externe
Xing, K., Achiche, S., & Mayer, J. R. R. (2019). Five-axis machine tools accuracy condition monitoring based on volumetric errors and vector similarity measures. International Journal of Machine Tools & Manufacture, 138, 80-93. Lien externe
Jankowski, M., Wozniak, A., & Mayer, J. R. R. (décembre 2018). On-machine and In-laboratory Investigation of Errors of Probes for CNC Machine Tools [Communication écrite]. International Conference on Advances in Engineering Resesarch and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Mchichi, N. A., & Mayer, J. R. R. (2019). Optimal calibration strategy for a five-axis machine tool accuracy improvement using the D-optimal approach. International Journal of Advanced Manufacturing Technology, 103(1-4), 251-265. Lien externe
Ghandali, P., Khameneifar, F., & Mayer, J. R. R. (2019). A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners. Optics and Lasers in Engineering, 121, 87-95. Lien externe
Xing, K., Mayer, J. R. R., & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3). Disponible
Los, A., & Mayer, J. R. R. (2018). Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior. Precision Engineering, 53, 17-25. Lien externe
Xing, K., Achiche, S., Esmaeili, S., & Mayer, J. R. R. (octobre 2018). Comparison of direct and indirect methods for five-axis machine tools geometric error measurement [Communication écrite]. 6th CIRP Global Web Conference – Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018). Publié dans Procedia CIRP, 78. Disponible
Bitar-Nehme, E., & Mayer, J. R. R. (2018). Modelling and compensation of dominant thermally induced geometric errors using rotary axes power consumption. CIRP Annals, 67(1), 547-550. Lien externe
Rimpault, X., Bitar-Nehme, E., Balazinski, M., & Mayer, J. R. R. (2018). Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement: Journal of the International Measurement Confederation, 118, 23-28. Lien externe
Mayer, J. R. R., & Hashemiboroujeni, H. (2017). A ball dome artefact for coordinate metrology performance evaluation of a five axis machine tool. CIRP Annals - Manufacturing Technology, 66(1), 479-482. Lien externe
Wozniak, A., & Mayer, J. R. R. (mars 2017). Corrected measured point determination in coordinate measurement [Communication écrite]. Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications (ASPEN/ASPE 2017), Hong Kong, Hong kong. Lien externe
Mayer, J. R. R. (2017). Optical encoder displacement sensors. Dans Measurement, Instrumentation, and Sensors Handbook : Spatial, Mechanical, Thermal, and Radiation Measurement (2e éd., 30-1). Lien externe
Xing, K., Achiche, S., & Mayer, J. R. R. (mai 2017). Volumetric error modelling for machine tool condition monitoring using data methods [Communication écrite]. International Conference on Virtual Machining and Process Technology, Montréal, Québec. Non disponible
Rahman, M. M., & Mayer, J. R. R. (2016). Calibration performance investigation of an uncalibrated indigenous artefact probing for five-axis machine tool. Journal of Machine Engineering, 16(1), 33-42. Lien externe
Duong, X.T., Mayer, J. R. R., & Balazinski, M. (2016). Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs). International Journal of Refractory Metals and Hard Materials, 60, 169-176. Lien externe
Rahman, M. M., & Mayer, J. R. R. (2016). Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools. Archive of Mechanical Engineering, 63(4), 495-510. Disponible
Basta, I., Mayer, J. R. R., & Baron, L. (février 2016). The Octoball: an artefact for additive manufacturing precision assessment [Autre type de communication de conférence]. International Academy for Production Engineering (CIRP) Winter Meeting, STC-P Meeting, Paris, France (41 pages). Disponible
Givi, M., & Mayer, J. R. R. (2016). Optimized volumetric error compensation for five-axis machine tools considering relevance and compensability. CIRP Journal of Manufacturing Science and Technology, 12, 44-55. Lien externe
Rahman, M. M., & Mayer, J. R. R. (2016). Performance of a five-axis machine tool as a coordinate measuring machine (CMM). Journal of Advanced Mechanical Design, Systems, and Manufacturing, 10(5), 14 pages. Lien externe
Bitar-Nehme, E., & Mayer, J. R. R. (2016). Thermal volumetric effects under axes cycling using an invar R-test device and reference length. International Journal of Machine Tools and Manufacture, 105, 14-22. Lien externe
Rak, M. B., Wozniak, A., & Mayer, J. R. R. (2016). The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud. Optics and Lasers in Engineering, 81, 140-150. Lien externe
Los, A., & Mayer, J. R. R. (mars 2015). Application of GUF for a multi-output iterative measurement model estimation according to GUM S2 in indirect five-axis CNC machine tool calibration [Communication écrite]. 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2015), Queensgate, West Yorkshire, United kingdom. Non disponible
Guiassa, R., Mayer, J. R. R., St-Jacques, P., & Engin, S. (2015). Calibration of the cutting process and compensation of the compliance error by using on-machine probing. International Journal of Advanced Manufacturing Technology, 78(5-8), 1-9. Lien externe
Mahmud, A., Mayer, J. R. R., & Baron, L. (2015). Determining the minimum clamping force by cutting force simulation in aerospace fuselage pocket machining. International Journal of Advanced Manufacturing Technology, 80(9-12), 1751-1758. Lien externe
Wozniak, A., & Mayer, J. R. R. (2015). Discontinuity check of scanning in coordinate metrology. Measurement: Journal of the International Measurement Confederation, 59, 284-289. Lien externe
Rahman, M. M., & Mayer, J. R. R. (2015). Five axis machine tool volumetric error prediction through an indirect estimation of intra-and inter-axis error parameters by probing facets on a scale enriched uncalibrated indigenous artefact. Precision Engineering, 40, 94-105. Lien externe
Mahmud, A., Mayer, J. R. R., & Baron, L. (2015). Magnetic attraction forces between permanent magnet group arrays in a mobile magnetic clamp for pocket machining. CIRP Journal of Manufacturing Science and Technology, 11, 82-88. Lien externe
Mahmud, A., Mayer, J. R. R., & Baron, L. (2015). Modeling of Laterally Sliding Motion of a Magnetic Clamp. Advances in Acoustics and Vibration, 2015, 1-8. Disponible
Yang, J., Mayer, J. R. R., & Altintas, Y. (2015). A position independent geometric errors identification and correction method for five-axis serial machines based on screw theory. International Journal of Machine Tools and Manufacture, 95, 52-66. Lien externe
Rak, M. B., Mayer, J. R. R., & Wozniak, A. (2015). Proximity weighted correction of high density high uncertainty (HDHU) point cloud using low density low uncertainty (LDLU) reference point coordinates. Optics and Lasers in Engineering, 68, 160-165. Lien externe
Rahman, M. M., & Mayer, J. R. R. (octobre 2015). Testing a five axis machine tool for coordinate metrology [Communication écrite]. 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM 2015), Kyoto, Japan. Lien externe
Mayer, J. R. R., Rahman, M. M., & Los, A. (2015). An uncalibrated cylindrical indigenous artefact for measuring inter-axis errors of a five-axis machine tool. CIRP Annals - Manufacturing Technology, 64(1), 487-490. Lien externe
Givi, M., & Mayer, J. R. R. (2015). Volumetric error formulation and mismatch test for five-axis CNC machine compensation using differential kinematics and ephemeral G-code. International Journal of Advanced Manufacturing Technology, 77(9-12), 1645-1653. Lien externe
Mchichi, N. A., & Mayer, J. R. R. (juin 2014). Axis location errors and error motions calibration for a five-axis machine tool using the SAMBA method [Communication écrite]. 6th CIRP International Conference on High Performance Cutting (HPC2014), Berkeley, California. Publié dans Procedia CIRP, 14. Lien externe
Song, R., Chen, Z., & Mayer, J. R. R. (août 2014). Blank design for the stretch forming of aircraft skin [Communication écrite]. International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe
Xuan-Truong, D., Balazinski, M., & Mayer, J. R. R. (novembre 2014). Chaotic tool wear during machining of titanium metal matrix composite (TiMMCs) [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (9 pages). Lien externe
Guiassa, R., Mayer, J. R. R., Balazinski, M., Engin, S., & Delorme, F.-E. (2014). Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process. International Journal of Computer Integrated Manufacturing, 27(11), 1022-1030. Lien externe
Woźniak, A., & Mayer, J. R. R. (2014). Metoda korekcji promienia końcówki w pomiarach skaningowych WMP. Mechanik, 87, 424-429. Non disponible
Rak, M., Woniak, A., & Mayer, J. R. R. (avril 2014). Review of interpolation methods for point cloud modelling in coordinate metrology [Communication écrite]. 11th International Scientific Conference on Coordinate Measuring Technique (CMT 2014), Bielsko-Biala, Poland. Non disponible
Los, A., & Mayer, J. R. R. (novembre 2014). Uncertainty estimation of a five-axis machine tool calibration using the adaptive Monte Carlo method [Communication écrite]. 29th Annual Meeting of the American Society for Precision Engineering (ASPE 2014), Boston, MA, United states. Non disponible
Givi, M., & Mayer, J. R. R. (2014). Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. International Journal of Machine Tools and Manufacture, 87, 89-95. Lien externe
Slamani, M., Mayer, J. R. R., & Balazinski, M. (2013). Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 65(9-12), 1669-1679. Lien externe
Guiassa, R., Mayer, J. R. R., & Balazinski, M. (mai 2012). Continuous tool path compensation using discrete on machine measurement [Communication écrite]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Non disponible
Mayer, J. R. R. (2012). Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact. CIRP Annals - Manufacturing Technology, 61(1), 515-518. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., Carrier, B., & Engin, S. (2012). Improvement to High-Speed End Mill Boring Accuracy by a Simple Compensation Strategy. Machining Science and Technology, 16(1), 1-19. Lien externe
Nafi, A., Mayer, J. R. R., & Wozniak, A. (2012). Reduced Configuration Set for the Multi-Step Method Applied to Machine and Probe Error Separation on a CMM. Measurement: Journal of the International Measurement Confederation, 45(10), 2321-2329. Lien externe
Wozniak, A., & Mayer, J. R. R. (2012). A Robust Method for Probe Tip Radius Correction in Coordinate Metrology. Measurement Science & Technology, 23(2), 8 pages. Lien externe
Andolfatto, L., Mayer, J. R. R., & Lavernhe, S. (2011). Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance. International Journal of Machine Tools and Manufacture, 51(7-8), 618-627. Lien externe
Andolfatto, L., Lavernhe, S., & Mayer, J. R. R. (2011). Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool. International Journal of Machine Tools and Manufacture, 51(10-11), 787-796. Lien externe
Slamani, M., Mayer, J. R. R., & Cloutier, G. (2011). Modeling and experimental validation of machine tool motion errors using degree optimized polynomial including motion hysteresis. Experimental Techniques, 35(1), 37-44. Lien externe
Nafi, A., Mayer, J. R. R., & Wozniak, A. (2011). Novel CMM-based implementation of the multi-step method for the separation of machine and probe errors. Precision Engineering, 35(2), 318-328. Lien externe
Guiassa, R., & Mayer, J. R. R. (2011). Predictive compliance based model for compensation in multi-pass milling by on-machine probing. CIRP Annals - Manufacturing Technology, 60(1), 391-394. Lien externe
Nafi, A., & Mayer, J. R. R. (juillet 2011). Probing variance separation on coordinate measuring machines [Communication écrite]. World Congress on Engineering (WCE 2011), London, United kingdom. Lien externe
Erkan, T., Mayer, J. R. R., & Wozniak, A. (2011). Surface probing simulator for the evaluation of CMM probe radius correction software. International Journal of Advanced Manufacturing Technology, 55(1-4), 307-315. Lien externe
Erkan, T., Mayer, J. R. R., & Dupont, Y. (2011). Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact. Precision Engineering, 35(1), 116-125. Lien externe
Erkan, T., & Mayer, J. R. R. (2010). A cluster analysis applied to volumetric errors of five-axis machine tools obtained by probing an uncalibrated artefact. CIRP Annals - Manufacturing Technology, 59(1), 539-542. Lien externe
Guiassa, R., & Mayer, J. R. R. (mai 2010). Compensation of compliance errors in machining using process intermittent probing [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Nafi, A., Mayer, J. R. R., & Wozniak, A. (avril 2010). Configurations selection for the separation of machine and probe errors on a CMM by a redundancy method [Communication écrite]. 9th International Scientific Conference Coordinate Measuring Technique, Bielsko-biala-Ustron, Poland. Non disponible
Slamani, M., Mayer, J. R. R., Balazinski, M., Zargarbashi, S. H. H., Engin, S., & Lartigue, C. (2010). Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 50(9-12), 1063-1073. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2010). Identification and Compensation of Dynamic Scale Mismatches in High-Speed End Mill Boring Trajectory on CNC Machines. Journal of Manufacturing Science and Engineering, 132(3), 034501-034501. Lien externe
Nafi, A., & Mayer, J. R. R. (mai 2010). Identification of scale and squareness errors on a CMM using a step gauge measured based on the ASME 89.4.10360.2-2008 standard [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Erkan, T., & Mayer, J. R. R. (juillet 2010). Linear axes performance check on a five-Axis machine tool by probing an uncalibrated artefact [Communication écrite]. 36th International MATADOR Conference, Manchester, Lancashire, United kingdom. Lien externe
Erkan, T., & Mayer, J. R. R. (juin 2010). Link error estimation for volumetric distortion error prediction of a five-axis machine by probing and uncalibrated artefact [Communication écrite]. 2nd CIRP International Conference on Process Machine Interactions, Vancouver, Canada. Non disponible
Erkan, T., Mayer, J. R. R., & Dupont, Y. (octobre 2009). Compensation for the unknown geometry of a reconfigurable uncalibrated 3D ball artefact for fiveaxis machine volumetric check [Communication écrite]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states. Non disponible
Wozniak, A., & Mayer, J. R. R. (octobre 2009). Corrected measured point validity check in coordinate metrology [Communication écrite]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states. Non disponible
Onat Ekinci, T., Mayer, J. R. R., & Cloutier, G. (2009). Investigation of accuracy of aerostatic guideways. International Journal of Machine Tools and Manufacture, 49(6), 478-487. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (mai 2009). Modeling and prediction of machines tools errors from circular tests [Communication écrite]. CANCAM 2009, Halifax. Non disponible
Nafi, A., Mayer, J. R. R., & Wozniak, A. (octobre 2009). Redundancy method for the separation of machine and triggering probe errors in small volume measurement on a CMM [Communication écrite]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states. Non disponible
Zargarbashi, S. H. H., & Mayer, J. R. R. (2009). Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor. International Journal of Machine Tools and Manufacture, 49(10), 759-766. Lien externe
Wozniak, A., Mayer, J. R. R., & Balazinski, M. (2009). Stylus tip envelop method: Corrected measured point determination in high definition coordinate metrology. International Journal of Advanced Manufacturing Technology, 42(5-6), 505-514. Lien externe
Chatelain, J.-F., Roy, R., & Mayer, J. R. R. (2008). Development of a spiral trajectory for high speed roughing of light alloy aerospace components. WSEAS Transactions on Applied and Theoretical Mechanics, 3(3), 83-93. Lien externe
Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H., & L'Espérance, G. (2008). Diffusion Wear Mechanism During High-Speed Machining of 7475-T7351 Aluminum Alloy With Carbide End Mills. Wear, 265(11-12), 1793-1800. Lien externe
Zargarbashi, S. H. H., & Mayer, J. R. R. (mai 2008). Simulation of XYC trajectory in five-axis machine tool and the Jacobian-based error estimation [Communication écrite]. 19th IASTED International Conference on Modelling and Simulation, Québec, QC, Canada. Lien externe
Wozniak, A., Balazinski, M., & Mayer, J. R. R. (juin 2007). Application of fuzzy knowledge base for corrected measured point determination in coordinate metrology [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. Lien externe
Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (juin 2007). Aspects of the tool wear of carbide tools during high speed machining of aluminum alloys [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Slamani, M., Mayer, J. R. R., & Balazinski, M. (juin 2007). Improving machine tool accuracy for high-speed orbital milling of holes [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (juin 2007). Method for analyzing the effects of aluminum build-up on tungsten carbide tools behavior [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Wozniak, A., & Mayer, J. R. R. (septembre 2007). Micro-features measurement using meso-volume CMM [Communication écrite]. 7th International Symposium on Mechatronics, Warsaw, Poland. Non disponible
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (août 2007). Pomiary ksztaltu ostrzy narzedzi skrawajacych przy pomocy wspolrzednosciowych maszyn pomiarowych [Communication écrite]. Metrologia w technikach wytwarzania, XII Krajowa III Miedzynarodowa Konferencja Naukowo Techniczna, Poland. Non disponible
Zargarbashi, S. H. H., & Mayer, J. R. R. (juin 2007). A predictive maintenance method for rotary axes of five-axis machine tools [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Roy, R., Chatelain, J.-F., Mayer, J. R. R., Chalut, S., & Engin, S. (juin 2007). Réduction du temps d'usinage par optimisation des trajectoires de coupe, de type spirale [Communication écrite]. 5th International Conference on Industrial Automation, Montréal, Québec. Non disponible
Ekinci, T. O., & Mayer, J. R. R. (juin 2007). Relationships between straightness and angular kinematic errors in machines [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Ekinci, T. O., & Mayer, J. R. R. (2007). Relationships Between Straightness and Angular Kinematic Errors in Machines. International Journal of Machine Tools and Manufacture, 47(12-13), 1997-2004. Lien externe
Zargarbashi, S. H. H., & Mayer, J. R. R. (2006). Assessment of Machine Tool Trunnion Axis Motion Error, Using Magnetic Double Ball Bar. International Journal of Machine Tools and Manufacture, 46(14), 1823-1834. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (juin 2006). Characterization of Machine Tools for Boring by Highspeed Orbital Milling [Communication écrite]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Non disponible
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (juin 2006). Investigation on Prescise Measurement of Cutting Tool Edges Using Coordinate Measuring Machines [Communication écrite]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Non disponible
Zargar, S. H. H., & Mayer, J. R. R. (mai 2023). Methodology for Motion Error Diagnostic of a Machine Tool Trunnion Axis Using DBB [Communication écrite]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec. Non disponible
Zargar, S. H. H., & Mayer, J. R. R. (juin 2005). Methodology for the calibration of a machine tool trunnion axis tilt, radial and axial motion errors using telescoping magnetic double ball bar [Communication écrite]. 7th International Conference on Laser Metrology, Machine Tool, CMM, and Robot Performance, University of Cranfield. Non disponible
Zargarbashi, S. H. H., & Mayer, J. R. R. (2005). A Model Based Method for Centering Double Ball Bar Test Results Preventing Fictitious Ovalization Effects. International Journal of Machine Tools and Manufacture, 45(10), 1132-1139. Lien externe
Ekinci, T. O., Mayer, J. R. R., & Cloutier, G. (mai 2023). Thermal Distortion Modeling on CMM Structures [Communication écrite]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec. Non disponible
Paris, H., Peigne, G., & Mayer, J. R. R. (2004). Surface Shape Prediction in High Speed Milling. International Journal of Machine Tools and Manufacture, 44(15), 1567-1576. Lien externe
Phan, A. V., Baron, L., Mayer, J. R. R., & Cloutier, G. (2003). Finite Element and Experimental Studies of Diametral Errors in Cantilever Bar Turning. Applied Mathematical Modelling, 27(3), 221-232. Lien externe
Dupont, Y., Cloutier, G., & Mayer, J. R. R. Identification Method for Scale, Pitch and Yaw Deviations With Linear Measurements [Communication écrite]. Laser Metrology and Machine Performance VI. Non disponible
Abbaszadeh-Mir, Y., Mayer, J. R. R., & Fortin, C. Methodology and Simulation of the Calibration of a Five-Axis Machine Tool Link Geometry and Motion Errors Using Polynomial Modelling and a Telescoping Magnetic Ball-Bar [Communication écrite]. Laser Metrology and Machine Performance VI. Non disponible
Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797. Lien externe
Mir, Y. A., Mayer, J. R. R., & Fortin, C. (2002). Tool path error prediction of a five-axis machine tool with geometric errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(5), 697-712. Lien externe
Mayer, J. R. R., Mir, Y. A., & Fortin, C. (janvier 2000). Calibration of a five-axis machine tool for position independent geometric error parameters using a telescoping magnetic ball bar [Communication écrite]. 33rd International MATADOR Conference, Manchester, United Kingdom. Lien externe
Mayer, J. R. R., Phan, A. V., & Cloutier, G. (2000). Prediction of Diameter Errors in Bar Turning: a Computationally Effective Model. Applied Mathematical Modelling, 24(12), 943-956. Lien externe
Cloutier, G., Mayer, J. R. R., & Aussel, W. (janvier 2000). Study of the co-calibration of the scale error of a prismatic joint and of a step gauge by shearing of reversal techniques [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec. Non disponible
Phan, A. V., Cloutier, G., & Mayer, J. R. R. (1999). Finite element model for predicting tapered workpiece deflections in turning. Computer modeling and simulation in engineering, 4(2), 138-142. Non disponible
Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (1999). A Finite-Element Model With Closed-Form Solutions to Workpiece Deflections in Turning. International Journal of Production Research, 37(17), 4039-4051. Lien externe
Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (janvier 1999). Investigation into diametral error modeling in bar turning [Communication écrite]. NSF Grantees Conference, Los Angeles, USA. Non disponible
Cloutier, G., Mayer, J. R. R., & Phan, A.-V. (1999). Singularity function representation in obtaining closed-form solutions to workpiece deflections in turning multi-diameter bars. Computer modeling and simulation in engineering, 4(2), 133-137. Non disponible
Mayer, J. R. R., Andrian, R., Cloutier, G., & Fortin, C. (janvier 1998). Artefact probing for machine tool and process diagnosis [Communication écrite]. 13th Annual Meeting American Society for Precision Engineering, St-Louis, Missouri. Non disponible
Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. A boundary contour formulation for design sensitivity analysis in two-dimensional linear elasticity [Communication écrite]. Canadian conference on applied mechanics (CANCAM 1997), Québec, Canada. Publié dans International Journal of Solids and Structures, 35(16). Lien externe
Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. (1998). Hypersingular Boundary Contour Method for Two-Dimensional Linear Elasticity. Acta Mechanica, 130(3-4), 209-225. Lien externe
Mayer, J. R. R., Andrian, R., Fortin, C., & Cloutier, G. (janvier 1998). Machine tool capability diagnostic by touch probing [Communication écrite]. CSME Forum, Toronto, Canada. Non disponible
Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. (1998). Stresses, Stress Sensitivities and Shape Optimization in Two- Dimensional Linear Elasticity by the Boundary Contour Method. International Journal for Numerical Methods in Engineering, 42(8), 1391-1407. Lien externe
Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. The boundary contour method for two-dimensional linear elasticity with quadratic boundary elements [Communication écrite]. 12th International Conference on Boundary Element Technology (BETECH XII), Knowville, TN. Publié dans Computational Mechanics, 20(4). Lien externe
Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (janvier 1997). Interactive computer aided process planning system for manufacturing, assembly and inspection [Communication écrite]. 32nd International MATADOR Conference, Manchester, U.K.. Lien externe
Mayer, J. R. R., Andrian, R., Fortin, C., Cloutier, G., & Luong, T. (juillet 1997). Performance verification and monitoring of nc machine-tools for in-process part measurement by touch probing [Communication écrite]. 32nd International MATADOR Conference, Manchester, UK. Lien externe
Balazinski, M., Czogala, E., Mayer, J. R. R., & Shen, Y. (janvier 1997). Pre-travel compensation of kinematic touch trigger probes using fuzzy decision support system [Communication écrite]. 7th IFSA World Congress, Prague. Non disponible
Mayer, J. R. R., Cloutier, G., & Fortin, C. (1997). Quadrilateration and measurement site identification with dual scanning axis laser tracking interferometers. Measurement: Journal of the International Measurement Confederation, 20(3), 171-187. Lien externe
Mayer, J. R. R., Mir, Y. A., Trochu, F., Vafaeesefat, A., & Balazinski, M. (1997). Touch probe radius compensation for coordinate measurement using kriging interpolation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211(B1), 11-18. Lien externe
Mayer, J. R. R., Ghazzar, A., & Rossy, O. (1996). 3D characterisation, modelling and compensation of the pre-travel of a kinematic touch trigger probes. Measurement, 19(2), 83-94. Lien externe
Mayer, J. R. R., Mir, Y. A., & Balazinski, M. (janvier 1995). Automatic digitizing of sculptured parts with coordinate measuring machines [Communication écrite]. 6th International Conference on Industrial Metrology in Metromatica, Zaragoza, Spain. Non disponible
Oliviers, M. P., & Mayer, J. R. R. (novembre 1995). Global kinematic calibration of a stewart-platform [Communication écrite]. ASME Dynamic Systems and Control Division, San Francisco, CAL, USA. Non disponible
Mayer, J. R. R., Mir, Y. A., Balazinski, M., Trochu, F., & Vafaeesefat, A. (janvier 1995). Modeling of sculptured surfaces from touch probe measurements [Communication écrite]. 2nd International Conference on the Concurrent Engineering, Potomac. Non disponible
Mir, Y. A., Mayer, J. R. R., & Balazinski, M. (janvier 1995). Rapid programming of coordinate measuring machine for digitizing sculptured surface parts [Communication écrite]. Congrès international de génie industriel de Montréal, Montréal, Québec. Non disponible
Mayer, J. R. R. (1994). High-resolution of rotary encoder analog quadrature signals. IEEE Transactions on Instrumentation and Measurement, 43(3), 494-498. Lien externe
Mayer, J. R. R., & Parker, G. A. (1994). Portable instrument for 3-D dynamic robot measurements using triangulation and laser tracking. IEEE Transactions on Robotics and Automation, 10(4), 504-516. Lien externe
