<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Lévesque, Martin"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Nombre de documents: 271

Article de revue

Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages). Accès restreint

Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications. Composites Science and Technology, 231, 9 pages. Lien externe

Lampron, O., Lingua, A., Therriault, D., & Lévesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 103369 (12 pages). Lien externe

Sushitskii, V., van Rees, W. M., Lévesque, M., & Gosselin, F. (2023). Determination of Optimal Shot Peen Forming Patterns Using the Theory of Non-Euclidean Plates. Journal of Manufacturing Science and Engineering-Transactions of the Asme, 145(3), 031006 (15 pages). Lien externe

Pierre, J., Iervolino, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 10 pages. Lien externe

Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages). Lien externe

Lingua, A., Sosa-Rey, F., Pautard, S., Therriault, D., & Lévesque, M. (2023). Multiscale characterization of the fracture mechanics of additively manufactured short fiber-reinforced composites. Engineering Fracture Mechanics, 289, 19 pages. Lien externe

Sosa-Rey, F., Vella, C., Lingua, A., Pierre, J., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Multiscale Fast Fourier Transform homogenization of additively manufactured fiber reinforced composites from component-wise description of morphology. Composites Science and Technology, 243, 110261 (16 pages). Lien externe

Lampron, O., Therriault, D., & Lévesque, M. (2023). Phase-field modeling of fracture in fused filament fabricated thermoplastic parts and experimental validation. Engineering Fracture Mechanics, 292, 109667 (19 pages). Lien externe

Moeini, M., Yue, L., Begon, M., & Lévesque, M. (2023). Surrogate optimization of a lattice foot orthotic. Computers in Biology and Medicine, 155, 106376 (20 pages). Lien externe

Sosa-Rey, F., Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Thermo-viscoelastic multiscale homogenization of additively manufactured short fiber reinforced polymers from direct microstructure characterization. International Journal of Solids and Structures, 281, 13 pages. Lien externe

Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Accès restreint

Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445. Accès restreint

Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible

Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Lien externe

Moeini, M., Menard, A.-L., Yue, L., Hajizadeh, M., Begon, M., & Lévesque, M. (2022). Computationally efficient model to predict the deformations of a cellular foot orthotic. Computers in Biology and Medicine, 146, 105532 (16 pages). Lien externe

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages). Lien externe

Langot, J., Chávez‐Gómez, P., Lévesque, M., & Robert, É. (2022). Modeling the thermal decomposition and residual mass of a carbon fiber epoxy matrix composite with a phenomenological approach: Effect of the reaction scheme. Fire and Materials, 46(1), 262-276. Disponible

Moeini, M., Begon, M., & Lévesque, M. (2022). Numerical homogenization of a linearly elastic honeycomb lattice structure and with and results. Mechanics of Materials, 167, 104210 (17 pages). Lien externe

Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages. Lien externe

Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699. Lien externe

Faucheux, P. A., Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Peen forming and stress peen forming of rectangular 2024-T3 aluminium sheets: Curvatures, natural curvatures and residual stresses. Strain, 58(2), e12405 (24 pages). Lien externe

Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP Journal of Manufacturing Science and Technology, 36, 67-77. Lien externe

Trofimov, A., Le-Pavic, J., Therriault, D., & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, 162-169. Disponible

Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages). Disponible

Breumier, S., Trudeau-Lalonde, F., Lafrance, T., Robert, É., Villani, A., Kermouche, G., & Lévesque, M. (2021). Controlled single and repeated impact testing for material plastic behaviour characterisation under high strain rates. Strain, 57(6), 28 pages. Lien externe

Lampron, O., Therriault, D., & Lévesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages. Lien externe

Yazdani Sarvestani, H., Akbarzadeh, A. H., Therriault, D., & Lévesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 113705 (13 pages). Lien externe

Breumier, S., Adamski, F., Badreddine, J., Lévesque, M., & Kermouche, G. (2021). Microstructural and mechanical characterization of a shot peening induced rolled edge on direct aged Inconel 718 alloy. Materials Science and Engineering A, 816, 10 pages. Lien externe

Hamidpour, M., Nami, M. R., Khosravifard, A., & Lévesque, M. (2021). Modeling fracture in viscoelastic materials using a modified incremental meshfree RPIM and DIC technique. European Journal of Mechanics - A/Solids, 92, 52 pages. Lien externe

Langot, J., Pelzmann, T., Chávez-Gómez, P., Boanta, C. S., Karsten, J., Fiedler, B., Lévesque, M., & Robert, É. (2021). Multi-physics modeling of the ignition of polymer matrix composites (PMCs) exposed to fire. Fire Safety Journal, 122, 18 pages. Lien externe

Turcot, G., Paquet, D., Lévesque, M., & Turenne, S. (2021). A novel inverse methodology for the extraction of bulk elasto-plastic tensile properties of metals using spherical instrumented indentation. International Journal of Solids and Structures, 236-237, 20 pages. Lien externe

Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2021). On the tri-dimensional constitutive theory identification of linearly viscoelastic solids based on Bayesian framework. International Journal of Solids and Structures, 230-231, 19 pages. Lien externe

Praud, F., Schmitt, T., Zabeida, O., Maïza, S., Martinu, L., & Lévesque, M. (2021). Phase field fracture models to predict crack initiation and propagation in anti-reflective coatings. Thin Solid Films, 736, 14 pages. Lien externe

Diehl, P., Jha, P. K., Kaiser, H., Lipton, R., & Lévesque, M. (2020). An asynchronous and task-based implementation of peridynamics utilizing HPXthe C++ standard library for parallelism and concurrency. SN Applied Sciences, 2(12), 21 pages. Lien externe

Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. Lien externe

Miao, H., Mendez Romero, J. A., Forgues, S., & Lévesque, M. (2020). Experimental and numerical study of pneumatic needle peening effects on Aluminium Alloy 2024-T3. Journal of Materials Processing Technology, 275, 116370 (12 pages). Lien externe

Delorme, R., Diehl, P., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2020). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamic framework. Journal of Peridynamics and Nonlocal Modeling, 2(2), 111-135. Lien externe

Breumier, S., Sao-Joao, S., Villani, A., Lévesque, M., & Kermouche, G. (2020). High strain rate micro-compression for crystal plasticity constitutive law parameters identification. Materials and Design, 193, 17 pages. Lien externe

Bouscarrat, D., Lévesque, M., & Vieille, B. (2020). Influence of time-dependent phenomena on translaminar fracture of woven-ply C/PPS laminates above the glass transition temperature. Composites Part B: Engineering, 180, 11 pages. Lien externe

Bretin, R., Lévesque, M., Pilvin, P., & Bocher, P. (2020). Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element. International Journal of Fatigue, 137, 16 pages. Lien externe

Breumier, S., Villani, A., Maurice, C., Lévesque, M., & Kermouche, G. (2019). Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation. Materials & Design, 169. Disponible

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843. Lien externe

Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages). Lien externe

Canals, L., Badreddine, J., McGillivray, B., Miao, H. Y., & Lévesque, M. (2019). Effect of vibratory peening on the sub-surface layer of aerospace materials Ti-6Al-4V and E-16NiCrMo13. Journal of Materials Processing Technology, 264, 91-106. Lien externe

Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284. Lien externe

Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages. Lien externe

Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. Lien externe

Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 - Finite element study of the interaction between grains. International Journal of Solids and Structures, 176-177, 36-48. Lien externe

Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton. International Journal of Solids and Structures, 176-177, 49-67. Lien externe

Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74. Lien externe

Diehl, P., Prudhomme, S., & Lévesque, M. (2019). A Review of Benchmark Experiments for the Validation of Peridynamics Models. Journal of Peridynamics and Nonlocal Modeling, 1(1), 14-35. Lien externe

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. Lien externe

Faucheux, P. A., Gosselin, F., & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, 135-144. Disponible

Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. Lien externe

Klotz, T., Miao, H. Y., Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened Inconel 718. International Journal of Fatigue, 113, 204-221. Lien externe

Bianchetti, C., Zheng, R., Chromik, R. R., Lévesque, M., & Brochu, M. (2018). Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Engineering Fracture Mechanics, 202, 20-32. Lien externe

Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. Lien externe

Tabiai, I., Delorme, R., Therriault, D., & Lévesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467. Lien externe

Diehl, P., Tabiai, I., Baumann, F. W., Therriault, D., & Lévesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26. Lien externe

Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216. Lien externe

Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T7451. International Journal of Fatigue, 111, 289-298. Lien externe

Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21. Lien externe

Courtois, A., Hirsekorn, M., Benavente, M., Jaillon, A., Marcin, L., Ruiz, E., & Lévesque, M. (2018). Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling. Journal of Composite Materials, 53(2), 155-171. Lien externe

Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2017). 1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718. Mechanics of Materials, 109, 34-41. Lien externe

Delorme, R., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2017). Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity. Mechanics of Time-Dependent Materials, 21(4), 549-575. Lien externe

Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. Lien externe

Gariépy, A., Miao, H. Y., & Lévesque, M. (2017). Simulation of the shot peening process with variable shot diameters and impacting velocities. Advances in Engineering Software, 114, 121-133. Lien externe

Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2017). Viscoelastic distortion in asymmetric plates during post curing. Composites Part A: Applied Science and Manufacturing, 103(Supplement), 122-130. Lien externe

Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (2016). Corrigendum to “Shot peening and peen forming finite element modelling - Towards a quantitative method”. International Journal of Solids and Structures, 83, 183-183. Lien externe

El Mourid, A., Ganesan, R., Brochu, M., & Lévesque, M. (2016). Effect of temperature on the failure modes of a triaxially braided polymer matrix composite. International Journal of Solids and Structures, 97-98, 1-15. Lien externe

Dalir, H., Farahani, R. D., Hernandez, L., Aldebert, C., Lévesque, M., & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771. Lien externe

El Mourid, A., Ganesan, R., Brochu, M., Crochon, T., & Lévesque, M. (2015). Anisotropic oxidation due to aging in a triaxially braided composite and its influence on tensile failure. Composites Part B: Engineering, 76, 1-12. Lien externe

Favre, A., Fotsing, E.-R., Lévesque, M., & Ruiz, E. (2015). Comparative study of fiber-reinforced elastomer composites subjected to accelerated aging in water. Jounal of Elastomers and Plastics, 47(8), 719-737. Lien externe

Ghossein, E., & Lévesque, M. (2015). Homogenization models for predicting local field statistics in ellipsoidal particles reinforced composites: Comparisons and validations. International Journal of Solids and Structures, 58, 91-105. Lien externe

Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. (2015). Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds. Advanced Materials, 27(24), 3676-3680. Lien externe

Montesano, J., Selezneva, M., Lévesque, M., & Fawaz, Z. (2015). Modeling fatigue damage evolution in polymer matrix composite structures and validation using in-situ digital image correlation. Composite Structures, 125, 354-361. Lien externe

Mann, P., Miao, H. Y., Gariepy, A., Lévesque, M., & Chromik, R. R. (2015). Residual stress near single shot peening impingements determined by nanoindentation and numerical simulations. Journal of Materials Science, 50(5), 2284-2297. Lien externe

Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650. Disponible

Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (2014). Average electro-mechanical properties and responses of active composites. Computational Materials Science, 82, 405-414. Lien externe

Ghossein, E., & Lévesque, M. (2014). A comprehensive validation of analytical homogenization models: The case of ellipsoidal particles reinforced composites. Mechanics of Materials, 75, 135-150. Lien externe

Trudel, A., Sabourin, M., Lévesque, M., & Brochu, M. (2014). Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld. International Journal of Fatigue, 66, 39-46. Lien externe

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2014). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation. Optics and Lasers in Engineering, 55, 44-52. Lien externe

Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (2014). In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method. International Journal of Solids and Structures, 51(18), 3076-3086. Lien externe

Trudel, A., Lévesque, M., & Brochu, M. (2014). Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld. Engineering Fracture Mechanics, 115, 60-72. Lien externe

Pahlavanpour, M., Hubert, P., & Lévesque, M. (2014). Numerical and Analytical Modeling of the Stiffness of Polymer-Clay Nanocomposites With Aligned Particles: One- and Two-Step Methods. Computational Materials Science, 82, 122-130. Lien externe

Lapalme, M., Hoseini, M., Bocher, P., Colle, A. R., & Lévesque, M. (2014). Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys. Experimental Mechanics, 54(5), 841-855. Lien externe

Rahmani, B., Villemure, I., & Lévesque, M. (2014). Regularized virtual fields method for mechanical properties identification of composite materials. Computer Methods in Applied Mechanics and Engineering, 278, 543-566. Lien externe

Moussaddy, H., Therriault, D., & Lévesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), 3817-3828. Disponible

El Mourid, A., Ganesan, R., & Lévesque, M. (2013). Comparison between analytical and numerical predictions for the linearly viscoelastic behavior of textile composites. Mechanics of Materials, 58, 69-83. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). Erratum: On the Effect of the Peening Trajectory in Shot Peen Forming. Finite Elements in Analysis and Design, 74, 111-111. Lien externe

Gariepy, A., Bridier, F., Hoseini, M., Bocher, P., Perron, C., & Lévesque, M. (2013). Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351. Surface and Coatings Technology, 219, 15-30. Lien externe

Mortazavi, F., Lévesque, M., & Villemure, I. (2013). Image-based continuous displacement measurements using an improved spectral approach. Strain, 49(3), 233-248. Lien externe

Luk-Cyr, J., Crochon, T., Li, C., & Lévesque, M. (2013). Interconversion of linearly viscoelastic material functions expressed as Prony series: A closure. Mechanics of Time-Dependent Materials, 17(1), 53-82. Lien externe

Rahmani, B., Mortazavi, F., Villemure, I., & Lévesque, M. (2013). A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating. Composite Structures, 105, 1160-125. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the orientation of sheet rolling direction in shot peen forming. Journal of Materials Processing Technology, 213(6), 926-938. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the peening trajectory in shot peen forming. Finite Elements in Analysis and Design, 69, 48-61. Lien externe

Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., & Lévesque, M. (2013). Prediction of elastic properties in polymer-clay nanocomposites: Analytical homogenization methods and 3D finite element modeling. Computational Materials Science, 79, 206-215. Lien externe

Ghossein, E., & Lévesque, M. (2013). Random Generation of Periodic Hard Ellipsoids Based on Molecular Dynamics: a Computationally-Efficient Algorithm. Journal of Computational Physics, 253, 471-490. Lien externe

Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (2013). Stress relaxation of swine growth plate in semi-confined compression: Depth dependent tissue deformational behavior versus extracellular matrix composition and collagen fiber organization. Biomechanics and Modeling in Mechanobiology, 12(1), 67-78. Lien externe

Farahani, R. D., Pahlavanpour, M., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, 214-225. Disponible

Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactions. Composites Science and Technology, 72(12), 1387-1395. Disponible

Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8), 085502 (10 pages). Disponible

Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2012). Preparation of Highly Exfoliated Polyester–Clay Nanocomposites: Process–Property Correlations. Langmuir, 28(1), 791-803. Disponible

Ghossein, E., & Lévesque, M. (2012). A fully automated numerical tool for a comprehensive validation of homogenization models and its application to spherical particles reinforced composites. International Journal of Solids and Structures, 49(11-12), 1387-1398. Lien externe

Wosu, R., Sergerie, K., Lévesque, M., & Villemure, I. (2012). Mechanical properties of the porcine growth plate vary with developmental stage. Biomechanics and Modeling in Mechanobiology, 11(3-4), 303-312. Lien externe

Gariepy, A., Cyr, J., Levers, A., Perron, C., Bocher, P., & Lévesque, M. (2012). Potential applications of peen forming finite element modelling. Advances in Engineering Software, 52, 60-71. Lien externe

Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919. Disponible

Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (2011). Coupled heat conduction and thermal stress analyses in particulate composites. Mechanics of Materials, 43(10), 608-625. Lien externe

Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2011). Numerical simulation of the stress peen forming process and experimental validation. Advances in Engineering Software, 42(11), 963-975. Lien externe

Gariepy, A., Larose, S., Perron, C., & Lévesque, M. (2011). Shot peening and peen forming finite element modelling-towards a quantitative method. International Journal of Solids and Structures, 48(20), 2859-2877. Lien externe

Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2010). An analytical approach to relate shot peening parameters to Almen intensity. Surface and Coatings Technology, 205(7), 2055-2066. Lien externe

Miao, H. Y., Demers, D., Larose, S., Perron, C., & Lévesque, M. (2010). Experimental study of shot peening and stress peen forming. Journal of Materials Processing Technology, 210(15), 2089-2102. Lien externe

Crochon, T., Schonherr, T., Li, C., & Lévesque, M. (2010). On finite-element implementation strategies of Schapery-type constitutive theories. Mechanics of Time-Dependent Materials, 14(4), 359-387. Lien externe

Lourdel, N., Therriault, D., & Lévesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9), 095017 (7 pages). Disponible

Sergerie, K., Lacoursiere, M.-O., Lévesque, M., & Villemure, I. (2009). Mechanical properties of the porcine growth plate and its three zones from unconfined compression tests. Journal of Biomechanics, 42(4), 510-516. Lien externe

Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2009). On the potential applications of a 3D random finite element model for the simulation of shot peening. Advances in Engineering Software, 40(10), 1023-1038. Lien externe

Barello, R. B., & Lévesque, M. (2008). Comparison Between the Relaxation Spectra Obtained From Homogenization Models and Finite Elements Simulation for the Same Composite. International Journal of Solids and Structures, 45(3-4), 850-867. Lien externe

Burlat, M., Julien, D., Lévesque, M., Bui-Quoc, T., & Bernard, M. (2008). Effect of Local Cold Working on the Fatigue Life of 7475-T7351 Aluminium Alloy Hole Specimens. Engineering Fracture Mechanics, 75(8), 2042-2061. Lien externe

Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. D. (2008). Erratum: On the development and parameter identification of Schapery-type constitutive theories. Mechanics of Time-Dependent Materials, 12(3), 273-274. Lien externe

Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. D. (2008). On the Development and Parameter Identification of Schapery-Type Constitutive Theories. Mechanics of Time-Dependent Materials, 12(2), 95-127. Lien externe

Lévesque, M., Gilchrist, M. D., Bouleau, N., Derrien, K., & Baptiste, D. (2007). Numerical Inversion of the Laplace-Carson Transform Applied to Homogenization of Randomly Reinforced Linear Viscoelastic Media. Computational Mechanics, 40(4), 771-789. Lien externe

O'Dowd, F., Lévesque, M., & Gilchrist, M. D. (2006). Analysis of fibre orientation effects on injection moulded components. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(12), 1909-1921. Lien externe

Lévesque, M., Derrien, K., Mishnaevski Jr, L., Baptiste, D., & Gilchrist, M. D. (2004). A micromechanical model for nonlinear viscoelastic particle reinforced polymeric composite materials : Undamaged state. Composites Part A: Applied Science and Manufacturing, 35(7-8), 905-913. Lien externe

Rapport technique

Farahani, R. D., Lévesque, M., & Therriault, D. (2023). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

Toloup, C., Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites. (Rapport technique). Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

Lebedev, O., Trofimov, A., Lévesque, M., & Therriault, D. (2020). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

Miao, H. Y., & Lévesque, M. (2017). Fatigue life improvement on AA7050 by vibratory peening and shot peening. (Rapport technique). Non disponible

Canals, L., & Lévesque, M. (2017). Vibratory peening for the fatigue life improvement of aerospace parts. Part I. (Rapport technique). Non disponible

Canals, L., & Lévesque, M. (2017). Vibratory peening for the fatigue life improvement of aerospace parts. Part II. (Rapport technique). Non disponible

Lévesque, M., Chassé, M. C., Mehrez, E., & Bonneville, E. (2016). Collaboration pour des équipements et expertises de recherche. (Rapport technique). Non disponible

Miao, H. Y., & Lévesque, M. (2016). Literature review on three warm surface treatment processes : warm shot peening, warm laser shock peening and warm deep rolling. (Rapport technique). Non disponible

Miao, H. Y., Gariepy, A., & Lévesque, M. (2013). Peen forming simulation of an A320 bottom wing skin panel #1. (Rapport technique). Non disponible

Bui-Quoc, T., Julien, D., & Lévesque, M. (2011). Étude du comportement en fatigue propagation de l'acier A-514 a l'air ambiant. (Rapport technique). Non disponible

Lévesque, M., Bui-Quoc, T., & Therriault, D. (2010). Final Report – Pratt & Whitney specialized bi-axial fatigue testing specimens. (Rapport technique). Non disponible

Lévesque, M., Bui-Quoc, T., Therriault, D., & Lourdel, N. (2010). Task 1 Report – Bi-axial fatigue setup and testing for Pratt & Whitney US. (Rapport technique). Non disponible

Bui-Quoc, T., Lévesque, M., & Julien, D. (2009). Étude du comportement en fatigue-propagation d'un acier martensitique CA6NM en eau douce. (Rapport technique). Non disponible

Lévesque, M., Therriault, D., & Nowlan, I. (2009). Wedge clamp verification testing. (Rapport technique). Non disponible

Bui-Quoc, T., Lévesque, M., & Julien, D. (2008). Tensile and fatigue tests on plymetal assemblies. (Rapport technique). Non disponible

Bui-Quoc, T., Julien, D., & Lévesque, M. (2007). Effet d'une déformation plastique combinée au grenaillage sur le comportement statique et en fatigue de l'aluminium 7475-T7351. (Rapport technique). Non disponible

Communication écrite

Paques, M., Changeux, B., Das, A., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (mars 2023). Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4V [Communication écrite]. 152nd Annual Meeting and Exhibition of The Minerals, Metals and Materials Society (TMS 2023), San Diego, CA, USA. Lien externe

Bouscarrat, D., Calvat, M., Vieille, B., & Lévesque, M. (juin 2022). Analyses of time-dependent damage within carbon woven-ply reinforced thermoplastic composites laminates at high temperature [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe

Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (juin 2022). In-situ full-field measurements for 3D printed composites under interlayer delamination [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible

Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites [Communication écrite]. International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US. Non disponible

Breumier, S., Sao-Joao, S., Villani, A., Baltazar, J., Lévesque, M., & Kermouche, G. (septembre 2019). Nanomechanical testing for crystal plasticity constitutive framework identification at high strain rates [Communication écrite]. VII Nanomechanical Testing in Materials Research and Development, Melia Costa Del Sol, Malaga, Spain. Non disponible

Delbergue, D., Lévesque, M., & Bocher, P. (septembre 2017). About the importance of X-ray elastic constant determination in the precise measurement of residual stress profiles [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

Bianchetti, C., Lévesque, M., & Brochu, M. (septembre 2017). Effect of shot peening on the fatigue life of AA 7050-T7451 [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

Benavente, M., Marcin, L., Lévesque, M., & Ruiz, E. (juillet 2017). Geometrical instabilities in asymmetric plates reinforced with 3D interlock fabrics [Communication écrite]. Cancom 2017, Ottawa, Ontario. Non disponible

Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (août 2017). Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Lien externe

Benavente, M., Godon, T., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composites plates reinforced with 3D interlock fabrics [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China (9 pages). Lien externe

Miao, H., Tu, F., Delbergue, D., Bianchetti, C., Klotz, T., Bag, A., & Lévesque, M. (septembre 2017). Shot peening DEM-FEM simulation considering shot stream expansion, peening intensity and target materials [Communication écrite]. 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Castro Moreno, A., Tu, F., Lévesque, M., & Bocher, P. (septembre 2017). Shot peening FEM simulation: A novel approach based on crystal plasticity [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Study of short crack growth in shot peened 300M steel [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (août 2016). Comparison of two X-ray residual stress measurement methods: sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant [Communication écrite]. 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia (6 pages). Disponible

Bretin, R., Bocher, P., & Lévesque, M. (août 2016). Development of a cellular automaton for a better consideration of elastic neighborhood effect in polycrystals [Communication écrite]. 10th International Conference on Computational Methods (ICCM 2016), Berkeley, Calif.. Lien externe

Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C., & Lévesque, M. (juin 2016). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior [Communication écrite]. 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages). Lien externe

Courtois, A., Hirsekorn, M., Marcin, L., Vernet, N., Ruiz, E., & Lévesque, M. (mai 2016). Viscoelastic behavior of an epoxy resin during cure : characterization and modeling [Communication écrite]. 10th International Conference on Mechanics of Time-Dependent Materials, Paris, France. Non disponible

Chapelle, L., Lévesque, M., Brøndsted, P., Foldschack, M. R., & Kusano, Y. (juillet 2015). Generation of non-overlapping fiber architecture [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Danemark. Non disponible

Courteau-Godmaire, H., Fotsing, E. R., Causse, P., Lévesque, M., & Ruiz, E. (juillet 2015). Numerical modeling of resin shrinkage around insert in composite sandwich panels [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe

Bourgeois Collin, L., Villemure, I., & Lévesque, M. (mai 2014). On the relevance of using homogeneous biphasic models to characterize the mechanical behavior of the growth plate [Communication écrite]. 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Publié dans Mechanics of Time-Dependent Materials, 19(3). Lien externe

Crochon, T., Li, C., & Lévesque, M. On time-temperature-dependent viscoelastic behavior of an amorphous polyimide [Communication écrite]. Non spécifié. Lien externe

Lévesque, M., Miao, H. Y., Gariepy, A., & Levers, A. (septembre 2014). Prediction of shot peen forming through direct finite element simulation [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe

Miao, H. Y., Lebon, R., Lévesque, M., & Bocher, P. (septembre 2014). Residual stress measurement correction on shot peened AA2024 by finite element analysis [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe

Crochon, T., & Lévesque, M. (mai 2014). Time-temperature behaviour of MVK-10 matrix [Communication écrite]. 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Non disponible

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (juillet 2013). 3D full-field displacements/strains measurements in composites at micro-scale [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Non disponible

Guerin, N., Lévesque, M., & Therriault, D. (mai 2013). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique [Communication écrite]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states. Lien externe

Dulong, S., Lévesque, M., Li, C., & Vadean, A. (juillet 2013). Experimental investigation of physical aging effect of the mechanical properties of a carbon/polyimide braided composite [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Mortazavi, F., Canal, L. P., Gonzalez, C., Llorca, J., Villemure, I., & Lévesque, M. (mai 2013). Fullfield micro-strain measurements in composites by a hybrid spectral approach [Communication écrite]. Photomechanics, Montpellier, France. Non disponible

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (juillet 2013). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Pahlavanpour, M., Hubert, P., & Lévesque, M. (juillet 2013). Homogenization models for Polymer-Clay nanocomposites : one- and two-step approaches [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Chatel, T., Lévesque, M., & Therriault, D. (mai 2013). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications [Communication écrite]. 9th International conference on mechanics of time-dependent materials, Montréal, Québec. Non disponible

Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (septembre 2013). Mechanical Properties Identification of Particulate Composites Constitutive Materials using Virtual Fields Method [Communication écrite]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. Lien externe

Moussaddy, H., Therriault, D., & Lévesque, M. (juillet 2013). Modeling elastic properties of randomly oriented fiber composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Rahmani, B., Villemure, I., & Lévesque, M. (mai 2013). A new regularized model updating approach for accurate mechanical properties identification of composite materials [Communication écrite]. Photomechanics, Montpellier, France. Non disponible

Rahmani, B., Villemure, I., & Lévesque, M. (juillet 2013). A new regularized virtual fields method for composite material parameters identification [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ghossein, E., & Lévesque, M. (juillet 2013). Numerical validation of homogenization models for the case of ellipsoidal particles reinforced composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Montesano, J., Fawaz, Z., Lévesque, M., & Poon, C. J. (juillet 2013). Predicting fatigue damage development for braided carbon fiber polymer matrix composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Trudel, A., Lévesque, M., & Brochu, M. (juin 2013). Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel [Communication écrite]. 13th International Conference on Fracture, Beijing, China (10 pages). Non disponible

El Mourid, A., Ganesan, R., & Lévesque, M. (juillet 2013). Time and temperature influence on the failure of textile composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Crochon, T., Dulong, S., Li, C., & Lévesque, M. (juillet 2013). Time-temperature behavior of a thermo-setting polymer matrix [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (juillet 2013). Underwater accelerated aging of elastomeric composite materials [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (novembre 2012). The effect of microstructural morphologies on the effective electromechanical properties of piezoelectric particle composites [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2012), Houston, TX, United states. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (juin 2012). Finite Element Peen Forming Simulation [Communication écrite]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA. Lien externe

Gariepy, A., Perron, C., Bocher, P., & Lévesque, M. (juin 2012). Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness [Communication écrite]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA. Lien externe

Gosselin, F., Therriault, D., & Lévesque, M. (février 2012). Microfabrication of a spider-silk analogue through the liquid rope coiling instability [Communication écrite]. APS March Meeting, Boston, MA, USA. Lien externe

Farahani, R. D., Lévesque, M., & Therriault, D. (mars 2012). Nanocomposite materials in three-dimensional freestanding microsensors [Communication écrite]. NanoQuebec, Montréal, Québec. Non disponible

Miao, H. Y., & Lévesque, M. (novembre 2012). Shot peening for fatigue life improvement and forming of aerospace structures [Communication écrite]. Research and Innovation for Transport Systems of the Future (RITF 2012), Paris, France. Non disponible

Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (mai 2011). The biomechanical behavior of the growth plate under compression is related to its collagen content and organization [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible

Moussaddy, H., Lévesque, M., & Therriault, D. (septembre 2011). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Miao, H. Y., & Lévesque, M. (septembre 2011). Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe

Rahmani, B., Villemure, I., & Lévesque, M. (septembre 2011). Elastic properties identification of planar composite materials based on finite element model updating and a hybrid optimization algorithm [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Moussaddy, H., Lévesque, M., & Therriault, D. (juin 2011). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe

Miao, H. Y., & Lévesque, M. (avril 2011). Experimental study and numerical simulation of the stress peen forming process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible

Miao, H. Y., & Lévesque, M. (août 2011). Experimental study of shot peening and stress peen forming [Communication écrite]. EPS Montréal International Conference on Advanced Materials and Processing 2011, Montréal, Québec. Non disponible

Crochon, T., Li, C., & Lévesque, M. (septembre 2011). Finite-Element implementation of Schapery-type constitutive theories based on an internal variables approach [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Ghossein, E., & Lévesque, M. (septembre 2011). A fully automated tool for a comprehensive validation of analytical homogenization models [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Mortazavi, F., Lévesque, M., & Villemure, I. (juin 2011). Improved spectral approach for continuous displacement measurement from digital images [Communication écrite]. SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Uncasville, Connecticut. Lien externe

Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (novembre 2010). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Communication écrite]. MRS Fall Meeting, Boston, MA. Publié dans MRS Proceedings, 1312. Lien externe

Pahlavanpour, M., Hubert, P., & Lévesque, M. (juin 2011). Modèles d'homogénéisation pour des nanocomposites à base de nanoargiles [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe

El Mourid, A., Ganesan, R., & Lévesque, M. (septembre 2011). Modeling of the linearly viscoelastic behavior of a braided composite [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Pahlavanpour, M., Hubert, P., & Lévesque, M. (septembre 2011). Multiscale modeling of polymer-clay nanocomposites : interphase and homogenization methods [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Miao, H. Y., & Lévesque, M. (avril 2011). Numerical models for the optimization of the fatigue life improvement by the shot peening process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible

Mortazavi, F., Lévesque, M., & Villemure, I. (septembre 2011). On the application of a hybrid spectral approach to the image-based measurement of displacements at micro-scale in composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

Miao, H. Y., & Lévesque, M. (septembre 2011). On the potential application of a numerical optimization of fatigue life with DoE and FEM [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe

El Mourid, A., Ganesan, R., & Lévesque, M. (juin 2011). Prédiction du comportement viscoélastique de matériaux composites textiles par une approche d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe

Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (mai 2011). Sequence-sensitive peen forming modelling [Communication écrite]. ASME Applied Mechanics and Materials (McMat 2011), Chicago, IL, USA. Non disponible

Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible

Ghossein, E., & Lévesque, M. (juin 2011). Un outil complètement automatisé pour l'évaluation en profondeur des performances des modèles d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe

Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible

Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (juin 2010). Coupled heat conduction and thermal stresses in particulate composites [Communication écrite]. 16th US National Congress on Theoretical and Applied Mechanics, State College, Pennsylvania, USA. Non disponible

Crochon, T., Li, C., & Lévesque, M. (septembre 2010). Finite-element implementation of constitutive theories [Communication écrite]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Portorož, Slovenia. Non disponible

Sabourin, M., Thibault, D., Bouffard, D. A., & Lévesque, M. (septembre 2010). Hydraulic runner design method for lifetime [Communication écrite]. 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. Publié dans International Journal of Fluid Machinery and Systems, 3(4). Lien externe

Farahani, R., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe

Sabourin, M., Thibault, D., Bouffard, D. A., & Lévesque, M. (septembre 2010). New parameters influencing runner life [Communication écrite]. 25th IARH Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. Lien externe

Woscu, R., Sergerie, K., Lacoursiere, M.-O., Lévesque, M., & Villemure, I. (octobre 2010). Les propriétés mécaniques intrisèques de la plaque de croissance porcine varient avec les stades développementaux [Communication écrite]. 40e Réunion annuelle de la Société de scoliose du Québec, Burlington, VT. Non disponible

Landry, F., Crochon, T., Li, C., & Lévesque, M. (septembre 2010). Thermomechanical behavior of a polymer resin [Communication écrite]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Portorož, Slovenia. Non disponible

Dalir, H., Farahani, R. D., Lévesque, M., & Therriault, D. (novembre 2010). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe

Miao, H. Y., Perron, C., & Lévesque, M. (mai 2009). Finite element simulation and experimental study of stress peen forming process [Communication écrite]. CASI Aircraft Design and Development Symposium, Kanata, Canada. Non disponible

Khan, K. A., Gudlur, P., Barello, R., Muliana, A. H., & Lévesque, M. (juin 2009). Heat conduction and thermal stresses in particulate composites [Communication écrite]. 8th International Congress on Thermal Stresses, Urbana-Champaign, Illinois, USA. Non disponible

Miao, H. Y., Perron, C., & Lévesque, M. (septembre 2008). Finite element simulation of shot peening and stress peen forming [Communication écrite]. 10th International Conference on Shot Peening, Tokyo, Japan. Lien externe

Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. (mars 2008). On the development and parameter identification of Schapery-type constitutive theories [Communication écrite]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Monterey, California. Non disponible

Lévesque, M., & Barello, R. B. (octobre 2008). On the homogenization of nonlinearly viscoelastic composite materials [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), Boston, MA, United states. Lien externe

Miao, H. Y., Lévesque, M., Perron, C., & Larose, S. (septembre 2007). 3D random finite element model for shop peening process [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles, California. Non disponible

Barello, R. B., & Lévesque, M. (juin 2007). Comparaison du spectre de relaxation des composites obtenu à partir des modèles d'homogénéisation et des simulations éléments finis [Communication écrite]. 15es Journées nationales sur les composites, Marseille, France. Lien externe

Miao, H. Y., Larose, S., Lévesque, M., & Perron, C. (avril 2007). Finite element models of shot peening processes [Communication écrite]. CASI Aero 2007, Toronto, Canada. Non disponible

Lévesque, M., Gilchrist, M. D., Bouleau, N., Derrien, K., & Baptiste, D. (juin 2007). Inversion numérique des transformées de Laplace-Carson rencontrées dans les problèmes d'homogénéisation [Communication écrite]. 15es Journées nationales sur les composites, Marseille, France. Lien externe

Lévesque, M., Derrien, K., Mishnawvsky, L., Baptiste, D., & Gilchrist, M. D. (août 2005). Modélisation du comportement mécanique de matériaux composites viscoélastiques non linéaires par une approche d'homogénéisation [Communication écrite]. 17e Congrès français de mécanique, Troyes, France. Non disponible

Lévesque, M., Derrien, K., Mishnaevsky, L. J., Baptiste, D., & Gilchrist, M. (mai 2004). Mechanical behaviour predictions of nonlinear viscoelastic composite materials by a homogenisation of random mixtures approach [Communication écrite]. European Conference on Composite Materials (ECCM 2004), Rhodes, Greece. Lien externe

Lévesque, M., Derrien, D., Baptiste, D., & Gilchrist, M. D. (septembre 2003). Modélisation du comportement mécanique de composites à matrice viscoélastique non linéaire et à renforts discontinus par une approche micromécanique [Communication écrite]. Congrès français de mécanique, Nice, France. Non disponible

Lévesque, M., Byrne, G., & Gilchrist, M. D. (juin 2002). Design and performance of a lightweight composite seat for civil aircraft applications [Communication écrite]. European Conference on Composite Materials (ECCM 2002), Bruges, Belgium. Non disponible

Lévesque, M., & Gilchrist, M. D. (mai 2000). Computational analysis of tabbing fixtures for composite coupon tests [Communication écrite]. Annual Symposium of the Irish Society for Scientific and Engineering Computation (ISSEC), Dublin, Ireland. Non disponible

Lévesque, M., & Gilchrist, M. D. (juin 2000). A statistical data reduction technique for the tensile testing of unidirectional composite materials [Communication écrite]. Euromech Solid Mechanics Conference, Metz, France. Non disponible

Affiche

Barello, R. B., & Lévesque, M. (décembre 2006). Modélisation de la décohésion interface renfort-matrice dans un matériau composite [Affiche]. 2e colloque annuel du CREPEC, Montréal, Québec. Non disponible

Résumé

Hu, S., Lingua, A., Lengaigne, J., Lévesque, M., Therriault, D., Walch, D., & Tabiai, I. (juin 2021). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Résumé]. Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada. Lien externe

Présentation

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (juillet 2023). Mesoscale full-field measurements for 3D-printed composites under delamination [Présentation]. Dans 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Lien externe

Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (juin 2018). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Présentation]. Dans 18th U.S. National Congress for Theoretical and Applied Mechanics, Chicago, USA. Non disponible

Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (mai 2018). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Présentation]. Dans Optimization Days 2018, Montréal, Canada. Lien externe

Diehl, P., Prudhomme, S., & Lévesque, M. (janvier 2018). A review for benchmark experiments against peridynamic models [Présentation]. Dans Nonlocal Methods in Fracture, Austin, USA. Non disponible

Klotz, T., Delbergue, D., Miao, H. Y., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Analytical fatigue life prediction of shot peened Inconel 718 [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

Miao, H. Y., Canals, L., McGilivray, B., & Lévesque, M. (septembre 2017). Comparison between vibratory peening and shot peening process [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Faucheux, P. A., Gosselin, F., & Lévesque, M. (septembre 2017). Computing peening patterns for peen forming and distortion correction [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Non disponible

Miao, H. Y., Méndez, J., Forgues, S., & Lévesque, M. (septembre 2017). Experimental and numerical study of needle peening effects in aluminum alloy 2024-T3 sheets [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Diehl, P., Tabiai, I., & Lévesque, M. (juillet 2017). Experimental validation of elastic state based peridynamic for PMMA and epoxy materials [Présentation]. Dans 14th U.S. National Congress on Computational Mechanics (USNCCM14), Montréal, Canada. Lien externe

Miao, H. Y., Klotz, T., Delbergue, D., & Lévesque, M. (septembre 2017). Finite element simulation of shot peened residual stress relaxation under low and high cycle loading [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Bag, A., Lévesque, M., & Brochu, M. (juin 2017). Investigation on the effect of shot peening on short fatigue crack growth in a high strength steel [Présentation]. Dans 29th Canadian Materials Science Conference, Ottawa, Canada. Non disponible

Benavente, M., Marcin, L., Godon, T., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composite plates reinforced with 3D interlock fabrics [Présentation]. Dans 21st International Conference on Composite Materials, Xi. Lien externe

Bouscarrat, D., Flipon, B., Vieille, B., Lévesque, M., Barbe, F., & Gautrelet, C. (mai 2016). Influence of time-dependent behaviors on the determination of the critical strain energy release rate Gₗc of woven-ply carbon fibers polyphenylene sulfide thermoplastic composites at high temperature [Présentation]. Dans 10th International Conference on the Mechanics of Time Dependent Materials, Paris, France. Non disponible

Bag, A., Lévesque, M., & Brochu, M. (août 2015). Analytical fatigue life prediction of shot-peened 300M steel [Présentation]. Dans Conference of Metallurgist (COM2015), Toronto, Canada. Non disponible

Filipon, B., Bouscarrat, D., Vieille, B., Barbe, F., Gautrelet, C., & Lévesque, M. (juin 2015). Couplage entre comportement visqueux et endommagement dans un stratifié tissé à matrice thermoplastique C/PPS à T>Tg [Présentation]. Dans 19es Journées nationales sur les composites, Lyon, France. Lien externe

Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (août 2015). Modelling of Inconel 718 crack tip's plastic zone softening during crack propagation [Présentation]. Dans Conference of Metallurgist (COM2015), Toronto, Canada. Non disponible

Bianchetti, C., Lévesque, M., & Brochu, M. (juin 2015). Prédiction analytique de l'effet du grenaillage sur la vie en fatigue de l'alliage d'aluminium 7050 [Présentation]. Dans Journée des étudiants du REGAL, Québec, Canada. Non disponible

El-Mourid, A., Ganesan, R., & Lévesque, M. (mai 2014). Ageing influence on the failure of textile composites at elevated temperatures [Présentation]. Dans 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Non disponible

Farahani, R. D., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Présentation]. Dans ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia. Non disponible

Mémoire de maîtrise

Lévesque, M. (2000). L'essai de traction de matériaux composites unidirectionnels à fibres continues [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Mémoire ou thèse hors Polytechnique

Lévesque, M. (2004). Modélisation du comportement mécanique de matériaux composites viscoélastiques non linéaires par une approche d'homogénéisation [Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers]. Non disponible

Chapitre de livre

Gariépy, A., Miao, H. Y., & Lévesque, M. (2014). Peen forming. Dans Hashmi, S. (édit.), Comprehensive Materials Processing. Volume 3, Advanced Forming Technologies (295-329). Lien externe

Lévesque, M., Gilchrist, M. D., & Fisa, B. (2003). A Theoretical study of the tensile test for highly anisotropic composite materials. Dans International, A. S. T. M. (édit.), ASTM Special Technical Publication (320-335). Lien externe

Liste produite: Fri Mar 29 04:24:58 2024 EDT.