 | Monter d'un niveau |
Ababaii, M. A., Gilani, N., & Pasikhani, J. V. (2023). Modification of Rice Husk with Ultrasound-Assisted Inorganic Treatment and Its Application for Catalytic Hydrogen Production. BioEnergy Research, 11 pages. Lien externe
Abbasipour, M., Kateb, P., Cicoira, F., & Pasini, D. (2023). Stretchable kirigami-inspired conductive polymers for strain sensors applications. Flexible and printed electronics, 8, 024003. Disponible
Abourich, M., Novara, L., Ajji, A., & Claveau-Mallet, D. (2023). Microfibres issues du lavage de vêtements - une initiative citoyenne de réduction à la source. Vecteur Environnement, 56, 6-6. Lien externe
Adavi, K., Shabanian, J., & Chaouki, J. (2023). Temperature Distribution Assessment in Gas-Solid Reactive and Nonreactive Systems Heated by Microwaves. Industrial & Engineering Chemistry Research, 62(26), 9970-9982. Lien externe
Adavi, K., Tahery, D., Khajouei, M., & Latifi, M. (2023). High local supersaturation formation for precipitated calcium carbonate synthesis by applying a rotating disk reactor. Brazilian Journal of Chemical Engineering, 8 pages. Lien externe
Adrar, S., & Ajji, A. (2023). Interactions between PLA, organo-montmorillonite and plasticizer: Synergistic effect on the barrier and mechanical properties of PLA nanocomposites blown films. Journal of Applied Polymer Science, 54867 (16 pages). Disponible
Afsharipour, M., Maghoul, P., Bouaanani, N., & Boudreault, R. (mai 2023). Thermal Design of Small Modular Reactors in Northern Regions [Communication écrite]. Rocscience International Conference (RIC 2023), Calgary, Atlanta, USA. Lien externe
Ait Amer, D. (2023). Développement d'un protocole expérimental pour l'étude cinétique et thermodynamique de la dissolution des sulfates de fer et de cobalt dans le cadre du recyclage des batteries lithium-ion [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Ajji, A., Chaouki, J., Esen, O., Grmela, M., Klika, V., & Pavelka, M. (2023). On geometry of multiscale mass action law and its fluctuations. Physica D-Nonlinear Phenomena, 445, 133642 (22 pages). Lien externe
Ajji, A., Jalali Dil, E., Saffar, A., & Kanani Aghkand, Z. (2023). Heat Sealing in Packaging. Lien externe
Akhtar, S., Xu, M., Mohit, M., & Sasmito, A. P. (2023). A comprehensive review of modeling water solidification for droplet freezing applications. Renewable & Sustainable Energy Reviews, 188, 113768 (27 pages). Lien externe
Al-Hawat, M.-L., Cherifi, K., Tricou, L.-P., Lamontagne, S., Tran, M., Ngu, A. C. Y., Manrique, G., Guirguis, N., Machuca-Parra, A. I., & Matoori, S. (2023). Fluorescent pH-sensing bandage for point-of-care wound diagnostics. Aggregate, 8 pages. Lien externe
Alcalde-Garcia, F., Prasher, S. O., Kaliaguine, S., Tavares, J. R., & Dumont, M.‐J. (2023). Desorption strategies and reusability of biopolymeric adsorbents and semisynthetic derivatives in hydrogel and hydrogel composites used in adsorption processes. ACS Engineering Au, 3(6), 443-460. Disponible
Alizadeh Sahraei, A., Azizi, D., Mokarizadeh, A. H., Boffito, D. C., & Larachi, F. (2023). Emerging Trends of Computational Chemistry and Molecular Modeling in Froth Flotation: A Review. ACS Engineering Au, 3(3), 128-164. Lien externe
Arab, H., Karkhanehchin, M. E., Mokhtarifar, M., Boffito, D. C., Baniadam, M., & Maghrebi, M. (2023). Towards a More Conductive and Stronger Cellulose-CNTs Composite Film through Controlling the Texture. Polymer-Plastics Technology and Materials, 62(14), 1923-1931. Lien externe
Asiedu-Boateng, P., Asiedu, N. Y., Zivkovic, V., & Patience, G. S. (2023). Attrition characteristics of limestone in gas-solid fluidized beds. Powder Technology, 419, 118342 (10 pages). Lien externe
Askham, C., Pauna, V. H., Boulay, A.-M., Fantke, P., Jolliet, O., Lavoie, J., Booth, A. M., Coutris, C., Verones, F., Weber, M., Vijver, M. G., Lusher, A., & Hajjar, C. (2023). Generating environmental sampling and testing data for micro- and nanoplastics for use in life cycle impact assessment. Science of The Total Environment, 859(Pt 2), 160038 (13 pages). Lien externe
Azimi, M. (2023). Flexible Organic Electrolyte-Gated Transistors Using Liquid and Semi-Solid Electrolytes [Thèse de doctorat, Polytechnique Montréal]. Disponible
Azimi, M., Kim, C.-, Fan, J., & Cicoira, F. (2023). Effect of Ionic Conductivity of Electrolyte on Printed Planar and Vertical Organic Electrochemical Transistors. Faraday Discussions, 246, 540-555. Lien externe
Azimi, M., Subramanian, A., Fan, J., Soavi, F., & Cicoira, F. (2023). Electrical and mechanical stability of flexible, organic electrolyte-gated transistors based on iongel and hydrogels. Journal of Materials Chemistry C, 11(14), 4623-4633. Lien externe
Baniahmad, S. F., Oliverio, R., Obregon-Gomez, I., Robert, A., Lenferink, A. E. G., Pazos, E., Virgilio, N., Banquy, X., De Crescenzo, G., & Durocher, Y. (2023). Affinity-controlled capture and release of engineered monoclonal antibodies by macroporous dextran hydrogels using coiled-coil interactions. mAbs, 15(1), 2218951 (18 pages). Lien externe
Bele, G., Benali, M., & Stuart, P. R. (2023). Comparative analysis and benchmarking of commercial and emerging fast pyrolysis technologies. Tappi Journal, 22(5), 283-303. Lien externe
Bele, G., Benali, M., & Stuart, P. R. (2023). Multicriteria assessment of technology pathways to produce renewable and sustainable biofuels: case study in eastern Canada. Biofuels, Bioproducts and Biorefining, 17(4), 944-960. Lien externe
Belkhiri, A., Virgilio, N., Santanach-Carreras, E., Esvan, J., Nassiet, V., Welemane, H., De Almeida, O., & Chabert, F. (2023). Influence of silane interfacial chemistry on the curing process of anionic Polyamide 6 in glass reinforced composites. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 676, 132183 (12 pages). Lien externe
Benalia, S. (2023). Modèle thermodynamique pour les chromates, molybdates et tungstates de sodium et de potassium impliqués dans la corrosion des aciers à haute température [Thèse de doctorat, Polytechnique Montréal]. Disponible
Benalia, S., Chartrand, P., & Robelin, C. (2023). Critical Evaluation of the Thermodynamic Properties of Na²Cr²O⁷, K²Cr²O⁷, Na²Mo²O⁷, K²Mo²O⁷, Na²W²O⁷, and K²W²O⁷. Journal of Physical and Chemical Reference Data, 52(4), 043103 (23 pages). Lien externe
Benalia, S., Tesfaye, F., Lindberg, D., Hupa, L., Chartrand, P., & Robelin, C. (2023). Thermodynamic Model for High-Temperature Corrosion Applications: The (NaCl + Na₂CO₃ + Na₂SO₄ + Na₂S2O₇ + Na₂CrO₄ + Na₂Cr₂O₇ + Na₂MoO₄ + Na₂Mo₂O₇ + Na₂O + KCl + K₂CO₃ + K₂SO₄ + K₂S₂O₇ + K₂CrO₄ + K₂Cr₂O₇ + K₂MoO₄ + K₂Mo₂O₇ + K₂O) System. Industrial & Engineering Chemistry Research, 62(49), 21397-21427. Lien externe
Benalia, S., Tesfaye, F., Lindberg, D., Sibarani, D., Hupa, L., Chartrand, P., & Robelin, C. (2023). Critical Evaluation and Calorimetric Study of the Thermodynamic Properties of Na₂CrO4, K2CrO4, Na2MoO4, K2MoO4, Na2WO4 and K2WO4. Journal of Physical and Chemical Reference Data, 52(4), 28 pages. Lien externe
Berthet, L., Karbasian, H. R., Blais, B., & Gosselin, F. (mai 2023). Physics-informed neural network-based modeling of the static reconfiguration of a plate under fluid flow [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Bibeau, V. (2023). Développement d'algorithmes d'apprentissage profond adaptés au génie chimique : cinétique chimique et mélange [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Bibeau, V., Barbeau, L., Boffito, D. C., & Blais, B. (2023). Artificial neural network to predict the power number of agitated tanks fed by CFD simulations. Canadian Journal of Chemical Engineering, 101(10), 5992-6002. Disponible
Bjorn, A., Lloyd, S., Schenker, U., Margni, M., Levasseur, A., Agez, M., & Matthews, H. D. (2023). Differentiation of greenhouse gases in corporate science-based targets improves alignment with Paris temperature goal. Environmental Research Letters, 18(8), 12 pages. Disponible
Bollini, P., Diwan, M., Gautam, P., Hartman, R. L., Hickman, D. A., Johnson, M. D., Kawase, M., Neurock, M., Patience, G. S., Stottlemyer, A. L., Vlachos, D. G., & Wilhite, B. A. (2023). Vision 2050: Reaction engineering roadmap. ACS Engineering Au, 3(6), 364-390. Disponible
Boumghar, H., Sarrazin, M., Banquy, X., Boffito, D. C., Patience, G. S., & Boumghar, Y. (2023). Optimization of Supercritical Carbon Dioxide Fluid Extraction of Medicinal Cannabis from Quebec. Processes, 11(7), 12 pages. Disponible
Brassard, D., Alavitabari, S., Raphael, W., Boudreault, R., Girard-Lauriaut, P.-L., & Tavares, J. R. (2023). Dataset for the publication "Improving atmospheric water harvesting in carbon-based sorbents through CO2 activation" in the journal Advanced Sustainable Systems [Ensemble de données]. Lien externe
Bugaut, M., Taguet, A., Le Moigne, N., & Heuzey, M.-C. (septembre 2023). Effect Of Processing On Particle Dispersion And Rheological Behaviour Of Cnc Reinforced Polyvinyl Alcohol Nanocomposites [Communication écrite]. 8th EPNOE International Polysaccharides Conference (EPNOE 2023), Graz, Austria. Lien externe
Castillo-Sánchez, J.-R., Gheribi, A. E., Lafaye, P., Salloum-Abou-Jaoude, G., & Harvey, J.-P. (juin 2023). Investigation of silicon sublattice substitution within (Al,Si)3Zr intermetallics via DFT simulations [Communication écrite]. 16th International Conference on Modelling of Casting Welding and Advanced Solidification Processes (MCWASP 2023), Banff, Alberta, Canada (8 pages). Publié dans IOP Conference Series: Materials Science and Engineering, 1281(1). Disponible
Castillo-Sánchez, J.-R., Oishi, K., St-Germain, L., Ait-Amer, D., & Harvey, J.-P. (2023). The power of computational thermochemistry in high-temperature process design and optimization : part 1 - unit operations. Calphad, 82, 102593 (16 pages). Accès restreint
Chaouki, J., Leclerc, P., Solouki, A., Monzavi, M., Hussain, A., Chen, Z., & Amini, A. (2023). Non-uniform Microwave Heating of Heterogeneous Systems: How to Turn Problems into Opportunities. Dans Hu, J., & Reddy, B. M. (édit.), Advances in Microwave-assisted Heterogeneous Catalysis (p. 347-367). Lien externe
Chouinard, G., Pelletier, F., Larose, M., Knoch, S., Pouchet, C., Dumont, M. J., & Tavares, J. R. (2023). Correction: Insect netting: Effect of mesh size and shape on exclusion of some fruit pests and natural enemies under laboratory and orchard conditions. Journal of Pest Science, 96(2), 871-873. Disponible
Chub, O. V., Dubois, J.-L., & Patience, G. S. (2023). Zeolite Y hydrolyses methyl methacrylate to methacrylic acid in the gas phase. Chemical Engineering Journal, 459, 141479 (10 pages). Lien externe
Cicoira, F. (mars 2024). Self-Healing, Stretchable and Recyclable Electronics [Communication écrite]. Materials for Sustainable Development Conference (MATSUS 2024), Barcelona, Spain. Publié dans Proceedings of MATSUS Spring 2024 Conference (MATSUS24). Lien externe
Compaore, U. L., Savadogo, O., & Doumbia, M. L. (2023). Development of Molten Carbonate Fuel Cell Based on Lignin Fuel Consumption (MC-LFC): Correlation Between Modeling and Experimental Results. Journal of New Materials for Electrochemical Systems, 26(1), 42-55. Lien externe
Corella-Puertas, E., Hajjar, C., Lavoie, J., & Boulay, A.-M. (2023). MarILCA characterization factors for microplastic impacts in life cycle assessment: Physical effects on biota from emissions to aquatic environments. Journal of Cleaner Production, 418, 12 pages. Lien externe
Courchesne, W. (2023). Conception of a ChemAppPy Simulation to Investigate the Electrodeposition of Aluminium in Molten Salts [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Da Silva Lima, C. V., Chartrand, P., & Robelin, C. (octobre 2023). Thermodynamic and phase equilibrium model for inert anode species dissolved in the electrolyte for aluminum production [Affiche]. REGAL Students’ Day, Québec City, Canada. Lien externe
Dadvand, M., & Savadogo, O. (2023). Highly corrosion and wear-resistant NiWSiCCeO2 composite coating. Canadian Metallurgical Quarterly, 14 pages. Lien externe
Daunais, C.-A., Barbeau, L., & Blais, B. (2023). An extensive study of shear thinning flow around a spherical particle for power-law and Carreau fluids. Journal of Non-Newtonian Fluid Mechanics, 311, 104951 (13 pages). Lien externe
de Bortoli, A., & Agez, M. (2023). Environmentally-extended input-output analyses efficiently sketch large-scale environmental transition plans: Illustration by Canada?s road industry. Journal of Cleaner Production, 388, 136039 (14 pages). Lien externe
de Bortoli, A., Baouch, Y., & Masdan, M. (2023). BIM can help decarbonize the construction sector: Primary life cycle evidence from pavement management systems. Journal of Cleaner Production, 391, 136056 (10 pages). Lien externe
Deepalakshmi, S., Revathy, M. S., Joshua, J. R., Saravanan, L., Thanikaikarasan, S., Jansi, R., Khan, M. A. M., & Savadogo, O. (2023). Synthesis of Graphene Oxide Coating on ZnCo<sub>2</sub>S<sub>4</sub> Using Hydrothermal Method for Electrochemical Capacitors Applications. Journal of New Materials for Electrochemical Systems, 26(4), 322-325. Lien externe
Dégardin, M. (2023). Développement d'une stratégie de biofonctionnalisation de nanoparticules d'or à partir de peptides superhélices et d'anticorps pour la détection du cancer du sein [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Dégardin, M., Gaudreault, J., Oliverio, R., Serafin, B., Forest-Nault, C., Liberelle, B., & De Crescenzo, G. (2023). Grafting Strategies of Oxidation-Prone Coiled-Coil Peptides for Protein Capture in Bioassays: Impact of Orientation and the Oxidation State. ACS Omega, 8(31), 28301-28313. Disponible
Dégardin, M., Liberelle, B., Oliverio, R., Baniahmad, S. F., Darviot, C., Largillière, I., Henry, O., Durocher, Y., Banquy, X., Meunier, M., & De Crescenzo, G. (2023). Coiled-coil-based biofunctionalization of 100 nm gold nanoparticles with the trastuzumab antibody for the detection of HER2-positive cancer cells. Langmuir, 39(34), 12235-12247. Lien externe
Dijk, G., Pas, J., Markovic, K., Scancar, J., & O'Connor, R. (2023). PEDOT:PSS-coated platinum electrodes for neural stimulation. Apl Bioengineering, 7(4), 046117 (11 pages). Lien externe
Dil, E. J., Ajji, A., & Saffar, A. (2023). Polyester Materials in Biomedical Applications. Dans Greener, J., & Cakmak, M. (édit.), Polyester Films: Materials, Processes and Applications (p. 306-342). Lien externe
Dourid, I., Bouzid, A., Chidami, S., Ould-Bachir, T., & Chaouki, J. (juin 2023). Characterization and Modeling of a Microwave Reactor for the Open-Loop Control of its Impedance [Communication écrite]. 2023 24th International Carpathian Control Conference (ICCC 2023), Miskolc-Szilvasvarad, Hungary. Lien externe
El Geitani Nehme, T. (2023). Development of a Robust Eulerian-Lagrangian Model for Process Intensification of Gas Fluidized and Spouted Beds [Thèse de doctorat, Polytechnique Montréal]. Accès restreint
El Geitani, T., & Blais, B. (2023). Quadrature-Centered Averaging Scheme for Accurate and Continuous Void Fraction Calculation in Computational Fluid Dynamics-Discrete Element Method Simulations. Industrial and Engineering Chemistry Research, 62(12), 5394-5407. Lien externe
El Geitani, T., & Blais, B. (2023). Solid-liquid rotary kilns: An experimental and CFD-DEM study. Powder Technology, 430, 119008 (14 pages). Lien externe
El Geitani, T., Golshan, S., & Blais, B. (2023). Toward High-Order CFD-DEM: Development and Validation. Industrial & Engineering Chemistry Research, 62(2), 1141-1159. Lien externe
Fahd, A., Baranovsky, A., Dubois, C., Chaouki, J., Elbasuney, S., & Shokry, S. (2023). Thrust characteristics of nano-carbon/Al/oxygenated salt nanothermites for micro-energetic applications. Defence Technology, 15 pages. Lien externe
Fahd, A., Dubois, C., Chaouki, J., & Wen, J. Z. (2023). Nanothermites: Developments and Future Perspectives. Dans Pang, W., & DeLuca, L. T. (édit.), Nano and Micro‐Scale Energetic Materials: Propellants and Explosives (p. 219-251). Lien externe
Falletta, E., Galloni, M. G., Mila, N., bin Roslan, M. N., Ghani, N. A., Cerrato, G., Giordana, A., Magni, M., Spriano, S. M., Boffito, D. C., & Bianchi, C. L. (2023). Fast and efficient piezo-photocatalytic mineralization of ibuprofen by BiOBr nanosheets under solar light irradiation. ACS Photonics, 10(11), 3929-3943. Disponible
Ferreira, V. O., Geitani, T. E., Silva, D., Blais, B., & Lopes, G. C. (2023). In-depth validation of unresolved CFD-DEM simulations of liquid fluidized beds. Powder Technology, 426, 16 pages. Lien externe
Ferreira, V. O., Silva Junior, D., de Melo, K. R. B., Blais, B., & Lopes, G. C. (2023). Prediction of the bed expansion of a liquid fluidized bed bioreactor applied to wastewater treatment and biogas production. Energy Conversion and Management, 290, 10 pages. Lien externe
Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2023). Flexible PET/(PET-TiO2) core/shell nanofibrous mats as potential photoanode layer for dye-sensitized solar cells, DSSCs. Materials Chemistry and Physics, 305, 127911 (24 pages). Lien externe
Gazil, O., Bernardi, J., Lassus, A., Virgilio, N., & Unterlass, M. M. (2023). Urethane functions can reduce metal salts under hydrothermal conditions: synthesis of noble metal nanoparticles on flexible sponges applied in semi-automated organic reduction. Journal of Materials Chemistry A, 11(24), 12703-12712. Lien externe
Geitani, T. E., Golshan, S., & Blais, B. (2023). A high-order stabilized solver for the volume averaged Navier-Stokes equations. International Journal for Numerical Methods in Fluids, 95(6), 1011-1033. Lien externe
Ghasri-Khouzani, M., Karimialavijeh, H., Pröbstle, M., Batmaz, R., Muhammad, W., Chakraborty, A., Sabiston, T. D., Harvey, J.-P., & Martin, É. (2023). Processability and characterization of A20X aluminum alloy fabricated by laser powder bed fusion. Materials Today Communications, 35, 105555 (14 pages). Lien externe
Gheribi, A. E., & Lee, J. J. (2023). Modeling solid-state detonation based on thermochemical equilibrium calculations. Combustion Science and Technology, 195(7), 1-6. Lien externe
Gheribi, A. E., Phan, A. T., & Chartrand, P. (2023). Electrochemical description of the interfacial tension between the liquid metal pad and cryolitic melts in industrial electrolysis cells. Journal of Molecular Liquids, 369, 12 pages. Lien externe
Goffin, A., Lennox, M. D., Raphael, W., Therriault, D., & Tavares, J. R. (2023). The impacts of post-processing treatments done under reactive and non-reactive atmospheres on the densification of binder jetting parts. Canadian Journal of Chemical Engineering, 11 pages. Lien externe
Grmela, M. (2023). Multiscale theory. Journal of Non-Equilibrium Thermodynamics, 48(2), 121-135. Lien externe
Guérette, C.-D. (2023). Cu on Co Improves C5+ Selectivity in the Fischer-Tropsch Synthesis [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Guyot, J. (2023). Synthèse d'un catalyseur de fer supporté sur de l'alumine par séchage par atomisation pour la réaction de Fischer Tropsch en lit fluidisé [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Hajjar, C., Bulle, C., & Boulay, A.-M. (2023). Life cycle impact assessment framework for assessing physical effects on biota of marine microplastics emissions. International Journal of Life Cycle Assessment, 21 pages. Lien externe
Han, X., Alameh, M.-G., Butowska, K., Knox, J. J., Lundgreen, K., Ghattas, M., Gong, N., Xue, L., Xu, Y., Lavertu, M., Bates, P., Xu, J., Nie, G., Zhong, Y., Weissman, D., & Mitchell, M. J. (2023). Adjuvant lipidoid-substituted lipid nanoparticles augment the immunogenicity of SARS-CoV-2 mRNA vaccines. Nature Nanotechnology, 18(9), 1105-1114. Lien externe
Harvey, J.-P., Gheribi, A. E., Robelin, C., Chartrand, P., Lafaye, P., Oishi, K., & Castillo-Sánchez, J.-R. A virtual laboratory for the aluminum industry [Présentation]. Dans 50th International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD 2023), Boston, MA, USA. Non disponible
Heli, B., El-Rifai, S., Ajji, A., & Heuzey, M.-C. (2023). Characterization of heat-treated chitosan cast films and their antimicrobial activity on the growth of natural flora of pasteurized milk. International Journal of Biological Macromolecules, 232, 123446 (9 pages). Lien externe
Huyer, C., Modafferi, D., Aminzare, M., Ferraro, J., Abdali, Z., Roy, S., Saldanha, D. J., Wasim, S., Alberti, J., Feng, S., Cicoira, F., & Dorval Courchesne, N.-M. (2023). Fabrication of Curli Fiber-PEDOT:PSS biomaterials with tunable self-healing, mechanical, and electrical properties. ACS Biomaterials Science and Engineering, 9(5), 2156-2169. Lien externe
Inocencio, L. C., Veronez, M. R., da Silveira Jr, L. G., Wohnrath Tognoli, F. M., de Souza, L. V., Bonato, J., & Diniz, J. L. (2023). 3-D Reconstruction of Rock Samples via Structure-From-Motion for Virtual Reality Applications: A Methodological Proposal. Geosciences, 13(1), 5 (25 pages). Lien externe
Jafari, A., Niknezhad, S. V., Kaviani, M., Saleh, W., Wong, N., Van Vliet, P. P., Moraes, C., Ajji, A., Kadem, L., Azarpira, N., Andelfinger, G., & Savoji, H. (2023). Formulation and Evaluation of PVA/Gelatin/Carrageenan Inks for 3D Printing and Development of Tissue-Engineered Heart Valves. Advanced Functional Materials, 18 pages. Lien externe
Joachim, J., Daunais, C.-A., Bibeau, V., Heltai, L., & Blais, B. (2023). A parallel and adaptative Nitsche immersed boundary method to simulate viscous mixing. Journal of Computational Physics, 488, 21 pages. Lien externe
Jofré, J., Gheribi, A. E., & Harvey, J.-P. (2023). Development of a flexible quasi-harmonic-based approach for fast generation of self-consistent thermodynamic properties used in computational thermochemistry. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 83, 102624 (16 pages). Lien externe
Kalufya Mukalayi, D. (2023). Étude de l'effet du silicium sur la lacune de miscibilité en phase liquide de l'alliage Cu-Co-Fe du procédé de fusion réductrice des minerais oxydés cupro-cobaltifères [Thèse de doctorat, Polytechnique Montréal]. Disponible
Kamyabmehr, A. (2023). Development of GRAS Oxygen Scavenging System for Active Film Packaging [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Harvey, J.-P., & Martin, É. (mars 2023). Comparison of Additively Manufactured and Cast Aluminum A205 Alloy [Communication écrite]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. Lien externe
Kateb, P., Fan, J., Jinsil, K., Zhou, X., Lodygensky, G. A., & Cicoira, F. (2023). Printable, adhesive, and self-healing dry epidermal electrodes based on PEDOT:PSS and polyurethane diol. Flexible and printed electronics, 8(4), 045006 (14 pages). Disponible
Khajouei, M., & Khamani, S. (2023). Underwater high-pressure pipelines for inter-country transport. Dans Kushvaha, V., Balaganesan, G., Mavinkere Rangappa, S., & Siengchin, S. (édit.), Polymer Composite Systems in Pipeline Repair (p. 27-44). Lien externe
Khajouei, M., Khamani, S., & Adavi, K. (2023). Hybrid pipes for high performance and reliability. Dans Kushvaha, V., Mavinkere Rangappa, S., Balaganesan, G., & Siengchin, S. (édit.), Polymer Composite Systems in Pipeline Repair (p. 71-92). Lien externe
Khajouei, M., Khamani, S., & Adavi, K. (2023). Wall thinning and damage detection techniques in pipelines. Dans Non spécifié (p. 93-106). Lien externe
Khajouei, M., Najafi, M., Jafari, S. A., & Latifi, M. (2023). Membrane Surface Modification via In Situ Grafting of GO/Pt Nanoparticles for Nitrate Removal with Anti-Biofouling Properties. Micromachines, 14(1), 128 (13 pages). Lien externe
Khamani, S., & Khajouei, M. (2023). Self-healing composite materials and their application in pipelines. Dans Kushvaha, V., Balaganesan, G., Mavinkere Rangappa, S., & Siengchin, S. (édit.), Polymer Composite Systems in Pipeline Repair (p. 249-265). Lien externe
Kheir, W. E., Dumais, A., Beaudoin, M., Marcos, B., Virgilio, N., Paquette, B., Faucheux, N., & Lauzon, M.-A. (2023). Impact of simulated brain interstitial fluid flow on the chemokine CXCL12 release from an alginate-based hydrogel in a new 3D in vitro model. Frontiers in Drug Delivery, 3, 1227776 (18 pages). Disponible
Kidari, O. (2023). Modélisation thermodynamique de systèmes contenant l'arsenic, le soufre et des métaux de transition [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Kidari, O., & Chartrand, P. (2023). Thermodynamic Evaluation and Optimization of the Ag-As-S system. Journal of Phase Equilibria and Diffusion, 44(2), 269-299. Lien externe
Kidari, O., & Chartrand, P. (2023). Thermodynamic Evaluation and Optimization of the As–Cd, As–Zn and As–Cd–Zn Systems. Metallurgical and Materials Transactions B, 2023(5), 2793-2814. Disponible
Kidari, O., & Chartrand, P. (2023). Thermodynamic evaluation and optimization of the As–Co, As–Fe and As–Fe–S systems. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 82, 15 pages. Disponible
Kim, C.-H., Azimi, M., Fan, J., Nagarajan, H., Wang, M., & Cicoira, F. (2023). All-printed and stretchable organic electrochemical transistors using a hydrogel electrolyte. Nanoscale, 15(7), 3263-3272. Lien externe
Klassen, D., Lennox, M. D., Dumont, M.-J., Chouinard, G., & Tavares, J. R. (2023). Dispensers for pheromonal pest control. Journal of Environmental Management, 325, 14-14. Lien externe
Koushanpour, A., Harvey, E. J., & Merle, G. (2023). Nano-dimensionality effect on electrochemical aptamer-based sensor performance for MUC1 liquid biopsy. Sensors & Diagnostics, 2(3), 714-720. Disponible
L’Haridon, J., Patouillard, L., Pedneault, J., Bonningue, P., Boulay, A.-M., Rollat, I., Blanchard, T., Gonçalves, G., Hervio, A., Gilbert, L., Witte, F., & Vargas-Gonzalez, M. (2023). SPOT: A strategic life-cycle-assessment-based methodology and tool for cosmetic product eco-design. Sustainability, 15(19), 14321 (35 pages). Disponible
Laasri, F., Garcia, A. C., Latifi, M., & Chaouki, J. (2023). Reaction mechanism of thermal decomposition of Phosphogypsum. Waste Management, 171, 482-490. Lien externe
Lafaye, P., Oishi, K., & Harvey, J.-P. (2023). A comprehensive study on the thermodynamics of the Al₁₃Fe₄ solid solution in the Al-Fe-Mn ternary system. Journal of Alloys and Compounds, 169054. Accès restreint
Lafaye, P., Vo, M. D., Jofré, J., & Harvey, J.-P. (2023). Investigating the Al/Si mixed site occupancy in the β-AlFeSi phase. Physical Chemistry Chemical Physics, 25(29), 20015-20025. Disponible
Landers, A. T., Self, J., McClary, S. A., Fritzsching, K. J., Persson, K. A., Hahn, N. T., & Zavadil, K. R. (2023). Calcium Cosalt Addition to Alter the Cation Solvation Structure and Enhance the Ca Metal Anode Performance. Journal of Physical Chemistry C, 127(49), 23664-23674. Lien externe
Laquerre, J.-É. (2023). Chemical Recycling of Meta-Aramid Fibres Into Nanofiber for Particulate Blocking Firefighter Hood [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Letessier, J., Gheribi, A. E., Vanson, J.-M., Duguay, C., Rigollet, F., Ehret, N., Vicente, J., & Gardarein, J.-L. (2023). Thermal transport-porosity-microstructural characteristics: unpicking the relationship in ultra-porous -Al2O3 powder. International Journal of Heat and Mass Transfer, 205. Lien externe
Li, Y., Gancheva, T., Estakhrianhaghighi, E., Favis, B. D., & Akbarzadeh, A. (2023). Material extrusion of quaternary co-continuous biopolymers: A strategy for realizing lightweight cellular solids with high impact toughness. Additive Manufacturing, 77, 103805 (15 pages). Lien externe
Li, Y., Gancheva, T., Estakhrianhaghighi, E., Favis, B. D., & Akbarzadeh, A. (mai 2023). Tough 3D printed biopolymeric cellular beams [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Liu, X., Beaudoin, G., Zhang, H., Esquivel Guzmán, J. A., Le Roux, É., Pellerin, C., Rivera, E., Lavertu, M., & Zhu, X. X. (2023). Chlorophyllin-Containing Copolymers and Their Responsive Properties. ACS Applied Bio Materials, 7 pages. Lien externe
Malli, A., Shehayeb, A., & Yehya, A. (2023). Occurrence and risks of microplastics in the ecosystems of the Middle East and North Africa (MENA). Environmental Science and Pollution Research, 30(24), 64800-64826. Lien externe
Manickam, S., Boffito, D. C., Flores, E. M.M., Lévêque, J.-M., Pflieger, R., Pollet, B. G., & Ashokkumar, M. (2023). Ultrasonics and Sonochemistry: Editors' Perspective. Ultrasonics Sonochemistry, 99, 106540 (25 pages). Disponible
Martin, R. G., Figueiredo, M., Johansson, C., Tavares, J. R., & Dubé, M. (2023). Characterization of Magnetic Susceptor Heating Rate Due to Hysteresis Losses in Thermoplastic Welding. Sampe Journal, 59(5), 19-27. Lien externe
Martin, R. G., Figueiredo, M., Johansson, C., Tavares, J. R., & Dubé, M. (avril 2023). Hysteresis losses magnetic susceptor heating rate characterization [Communication écrite]. SAMPE Conference and Exhibition, Seattle, WA, USA (16 pages). Lien externe
Masri, L. (2023). Démétallisation de l'acide phosphorique par des résines échangeuses d'ions [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Milano, F., Chevrier, A., De Crescenzo, G., & Lavertu, M. (2023). Injectable Lyophilized Chitosan-Thrombin-Platelet-Rich Plasma (CS-FIIa-PRP) Implant to Promote Tissue Regeneration: In Vitro and Ex Vivo Solidification Properties. Polymers, 15(13), 2919 (15 pages). Disponible
Moço, P. D., Xu, X., Silva, C. A. T., & Kamen, A. A. (2023). Production of adeno-associated viral vector serotype 6 by triple transfection of suspension HEK293 cells at higher cell densities. Biotechnology Journal, 18(9), 14 pages. Disponible
Mohammadi, M., Li, Y., Randall, J., Nofar, M., Heuzey, M.-C., & Carreau, P. (2023). Effects of molecular weight, stereo configuration of PLA, and processing on the dispersion of multiwalled carbon nanotubes and properties of corresponding nanocomposites. Canadian Journal of Chemical Engineering, 101(10), 5729-5742. Lien externe
Mohseni Garakani, M., Cooke, M. E., Weber, M. H., Wertheimer, M. R., Ajji, A., & Rosenzweig, D. H. (2023). A 3D, Compartmental Tumor-Stromal Microenvironment Model of Patient-Derived Bone Metastasis. International Journal of Molecular Sciences, 24(1), 160 (22 pages). Lien externe
Mokhtari, M., & Chaouki, J. (2023). A modelling approach to investigate the performance of slurry bubble column reactors implementing Fischer–Tropsch synthesis. The Canadian Journal of Chemical Engineering, 16 pages. Lien externe
Monzavi, M., Chen, Z., Hussain, A., & Chaouki, J. (2023). High quality products from microwave catalytic pyrolysis of heavy oil and polyethylene. Applied Thermal Engineering, 230(A), 14 pages. Lien externe
Moufakkir, F.-Z., Harvey, J.-P., & Robelin, C. (octobre 2023). Thermodynamic and phase equilibrium model for salt fluxes used for metal processing and aluminum alloy recycling [Affiche]. REGAL Students' day, Québec City, (Canada). Non disponible
Mousavi Khalkhali, Z. (2023). Reactively Compatibilized Polylactide/Polyamide 11 Blends and Nanocomposites Containing Multiwall Carbon Nanotubes [Thèse de doctorat, Polytechnique Montréal]. Disponible
Mousavi, Z., Heuzey, M.-C., & Carreau, P. (2023). Compatibilized polylactide/polyamide 11 blends containing multiwall carbon nanotubes: Morphology, rheology, electrical and mechanical properties. Polymer, 276, 13 pages. Lien externe
Munch, P., Heister, T., Saavedra, L. P., & Kronbichler, M. (2023). Efficient Distributed Matrix-free Multigrid Methods on Locally Refined Meshes for FEM Computations. Acm Transactions on Parallel Computing, 10(1), 1-38. Lien externe
Naeem, M. M., Al-Sakkari, E. G., Boffito, D. C., Rene, E. R., Gadalla, M. A., & Ashour, F. H. (2023). Single-stage waste oil conversion into biodiesel via sonication over bio-based bifunctional catalyst: Optimization, preliminary techno-economic and environmental analysis. Fuel, 341, 127587 (13 pages). Lien externe
Najjar, A. (2023). Valorization of Low-Grade Phosphate Fine Waste by Carbo-Chlorination Route [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Nong, Y., Ciari, F., Majeau-Bettez, G., Patouillard, L., & Trépanier, M. (janvier 2023). Prospective Environmental Impact of Carsharing: A Snapshot of Large-scale Use of Carsharing [Communication écrite]. 102nd Annual meeting of the Transportation Research Board, Washington, D.C.. Non disponible
Osman, M. A., Virgilio, N., Rouabhia, M., Lorenzo, L.-E., & Mighri, F. (2023). A novel foaming technique to develop functional open-cell polylactic acid scaffolds for bone tissue engineering. Journal of Applied Polymer Science, 140(32), e54240 (12 pages). Lien externe
Paquette, B., Safi, C., Naasri, S., Giraldo Solano, A., Therriault, H., Liberelle, B., Faucheux, N., Lauzon, M.-A., & Virgilio, N. (septembre 2023). Eliminate cancer cells infiltrated in the brain by attracting them into a macroporous hydrogel trap [Résumé]. CARO-COMP Joint Scientific Meeting (CARO-COMP 2023), Montréal, Québec, Canada (1 page). Publié dans Radiotherapy and Oncology, 186(Suppl.1). Lien externe
Pares, L. (2023). Conception d'un hydrogel macroporeux de chitosane et d'alginate réticulé avec de la génipine pour la capture de cellules cancéreuses de glioblastome [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Patience, G. S. (2023). Review of: "Measuring researchers' success more fairly: going beyond the H-index" [Commentaire ou lettre]. Qeios, 3OJYK1 (2 pages). Disponible
Patience, G. S., Villasana, Y., & Blais, B. (2023). Perspectives on judging posters. Canadian Journal of Chemical Engineering, 7 pages. Lien externe
Pechsiri, J. S., Thomas, J. B. E., El Bahraoui, N., Acien Fernandez, F. G., Chaouki, J., Chidami, S., Tinoco, R. R., Pena Martin, J., Gomez, C., Combe, M., & Grondahl, F. (2023). Comparative life cycle assessment of conventional and novel microalgae production systems and environmental impact mitigation in urban-industrial symbiosis. Science of The Total Environment, 854, 158445 (15 pages). Lien externe
Pedneault, J., Majeau-Bettez, G., & Margni, M. (2023). How much sorting is required for a circular low carbon aluminum economy? Journal of Industrial Ecology, 27(3), 977-992. Disponible
Pelton, A. (2023). Thermodynamic Calculations Support a Rain Cloud Model of Chondrule Formation. ACS Earth and Space Chemistry, 7(2), 404-415. Lien externe
Pelton, A., Bale, C. W., Melançon, J., Eriksson, G., Hack, K., & to Baben, M. (2023). Applying constraints to chemical equilibrium calculations through the use of virtual elements. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 81, 7 pages. Lien externe
Petrossian, G., Kateb, P., Miquet-Westphal, F., & Cicoira, F. (2023). Advances in Electrode Materials for Scalp, Forehead, and Ear EEG: A Mini-Review. ACS Applied Bio Materials, 6(8), 3019-3032. Lien externe
Phan, A. T., Gheribi, A. E., & Chartrand, P. (2023). Undissolved alumina in dynamic chunks piercing through the bath-metal interface in industrial aluminum electrolysis cells. Chemical Engineering Science, 276, 118799 (14 pages). Lien externe
Phan, Q. T., Zhang, H., Pham, D. A., Rabanel, J.-M., Filippini, A., Boffito, D. C., & Banquy, X. (2023). Multicompartment Micro- and Nanoparticles Using Supramolecular Assembly of Core–Shell Bottlebrush Polymers. ACS Macro Letters, 12(11), 1589-1594. Lien externe
Provost-Savard, A., Legros, R., & Majeau-Bettez, G. (2023). Parametrized regionalization of paper recycling life-cycle assessment. Waste Management, 156, 84-96. Lien externe
Randall, J., Flodquist, M., Schroeder, J., Valentine, J. R., Owusu, O., McCarthy, K., Weed, J., Hennen, J., Heuzey, M.-C., & Carreau, P. (2023). Comparing the structural, thermal, and rheological properties of poly(meso-lactide) to poly(l-lactide) and poly(rac-lactide). Macromolecules, 57(6), 2715-2728. Lien externe
Rincent, C., Castillo-Sánchez, J.-R., Gheribi, A. E., & Harvey, J.-P. (2023). On the exploration of the melting behavior of metallic compounds and solid solutions via multiple classical molecular dynamics approaches: application to Al-based systems. Physical Chemistry Chemical Physics, 25(15), 10866-10884. Disponible
Riyaheini, M., Gilani, N., & Vahabzadeh Pasikhani, J. (2023). Engineering the photo-induced charge generation between TiO₂ and FeS₂ heterojunction for enhanced photocatalytic wastewater purification. Ceramics International, 49(22), 34682-34696. Lien externe
Robert, J., Chauhan, D. S., Cherraj, A., Buiel, J., De Crescenzo, G., & Banquy, X. (2023). Coiled-coil peptide-based assembly of a plasmonic core-satellite polymer-metal nanocomposite as an efficient photothermal agent for drug delivery applications. Journal of Colloid and Interface Science, 641, 929-941. Lien externe
Rofeal, M., & Abdelmalek, F. (2023). Evaluation of bioactive multilayer and edible gelatin/xanthan gels crosslinked with Echinacea purpurea for Ricotta cheese preservation. Sustainable Chemistry and Pharmacy, 36, 101322 (14 pages). Lien externe
Rofeal, M., Abdelmalek, F., & Pietrasik, J. (2023). Sustainable polyhydroxyalkanoate production from food waste via Bacillus mycoides ICRI89: Enhanced 3D printing with poly (methyl methacrylate) blend. Polymers, 15(20), 4173 (19 pages). Disponible
Roger, T., Dion, L., Kiss, L., Chartrand, P., Phan, A. T., Gheribi, A. E., Guérard, S., & Bilodeau, J.-F. (novembre 2023). Modeling of the Distribution of Alumina Aggregates in an Electrolysis Cell based on a Three-Layer Method [Présentation]. Dans 41st International Conference and Exhibition of ICSOBA (ICSOBA 2023), Dubai, United Arab Emirates. Non disponible
Ruszczynski, L., Gheribi, A. E., & Smith, A. L. Coupled modelling of structural, thermodynamic and physicochemical properties of NaF-KF-UF4 fuel salt [Présentation]. Dans NuFuel 2023, Marseille, France. Non disponible
Rutherford, B., Panaritis, C., Pahija, E., Couillard, M., Patarachao, B., Shadbahr, J., Bensebaa, F., Patience, G. S., & Boffito, D. C. (2023). Ni nanoparticles on Co3O4 catalyze the reverse watergas shift with 95 % CO selectivity at 300 C. Fuel, 348, 11 pages. Lien externe
Sadek, R., Sharawi, M. S., Dubois, C., Tantawy, H., & Chaouki, J. (2023). Reduced Graphene Oxide/Barium Ferrite Ceramic Nanocomposite Synergism for High EMI Wave Absorption. ACS Omega, 8(17), 15099-15113. Lien externe
Saidi, A.E. K., El Khawaja, R., & Boffito, D. C. (2023). A Review of Traditional and Intensified Hydrometallurgy Techniques to Remove Chromium and Vanadium from Solid Industrial Waste. ACS Engineering Au, 22 pages. Lien externe
Samani, F. N., Darvishi, R., Moshkriz, A., & Darvish, M. (2023). Oxidized Pectin-Cross-Linked O- Carboxymethyl Chitosan/EDTriAA Intercalated LDH: An Antibiotic Adsorbent Hydrogel. Journal of Polymers and the Environment, 31(7), 3131-3148. Lien externe
Samarakone, S. (2023). The Sonochemical Extraction of Monazite Using Sulfuric Acid [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Samrane, K., Latifi, M., Khajouei, M., & Bouhaouss, A. (2023). Comprehensive analysis and relevant developments of cadmium removal technologies in fertilizers industry. Minerals Engineering, 201, 108189 (18 pages). Lien externe
Sarkar, B., Miquet-Westphal, F., Bobbara, S., George, B., Beltrame, G., Dousset, D., Wu, K., & Cicoira, F. (2023). Electromagnetic interference shielding in lightweight carbon xerogels. Materials Research Express, 10(4), 045601 (8 pages). Lien externe
Saulnier-Bellemare, T. (2023). Conception d'un catalyseur pour la transformation du glucose en acide lactique dans un réacteur à lit fluidisé [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Sauriol, P., Pasikhani, J. V., Shabanian, J., & Chaouki, J. (2023). Gas jet penetration in gas-solid fluidized and jetting-fluidized beds-A review. Powder Technology, 421, 118392 (22 pages). Lien externe
Schieppati, D., Patience, N. A., Galli, F., Dal, P., Seck, I., Patience, G. S., Fuoco, D., Banquy, X., & Boffito, D. C. (2023). Chemical and Biological Delignification of Biomass: A Review. Industrial & Engineering Chemistry Research, 62(33), 12757-12794. Lien externe
Schmidt, B., Amihai, I., Chioua, M., Kotriwala, A. M., Hollender, M., Janka, D., Lenders, F., Schlake, J. C., Kloepper, B., & Abukwaik, H. (2023). Method and apparatus for monitoring machine learning models. [Procédé et appareils de surveillance de modèle d'apprentissage automatique]. (Demande de brevet no EP4127846). Lien externe
Schmidt, B., Amihai, I., Kotriwala, A. M., Chioua, M., Janka, D., Lenders, F., Schlake, J. C., Hollender, M., Abukwaik, H., & Kloepper, B. (2023). Method of transfer learning for a specific production process of an industrial plant. [Procédé d'apprentissage de transfert pour un procédé de production spécifique d'une installation industrielle]. (Demande de brevet no EP4128071). Lien externe
Self, J., Hahn, N. T., & Persson, K. A. (2023). Solvation Effects on the Dielectric Constant of 1 M LiPF6 in Ethylene Carbonate: Ethyl Methyl Carbonate 3:7. Energy and Environmental Materials, 8 pages. Lien externe
Semekonawo, K. P., Bignan-Kagomna, B., Savadogo, O., Santara, D., Nignan, F. X., Kam, S., & Bathiebo, J. D. (2023). Pre-Feasibility Study for the Construction of a Photovoltaic Solar Power Plant with Energy Storage System Based on Lithium-Ion Batteries in Sub-Saharan Africa: Case of a 30 MWp Power Plant in Dapaong in Northern Togo. Sustainable Energy, 11(1), 21-30. Lien externe
Shanian, S. (2023). Techno-Economic Analysis of Hydrogen Production by Water Electrolysis Using Multi-Criteria Decision Methods (MCDM) [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Sharifian, M. (2023). Development of a Micro-GtL TechnologyThrough Risk Assessment and Temperature Control of Fischer-Tropsch Process [Thèse de doctorat, Polytechnique Montréal]. Accès restreint
Sharifian, M., Galli, F., Timbers, B., Hudon, N., & Patience, G. S. (2023). Safety analysis and risk assessment of a Micro-GtL Plant. Journal of Loss Prevention in the Process Industries, 83, 12 pages. Lien externe
Siblani, M., Ollivier, M., Favergeon, L., & Chartrand, P. (2023). Experimental and thermodynamic modeling of Al2O3 corundum and TiO2 rutile structures forming on Ti-6Al-4V powder during oxidation. Acta Materialia, 256, 15 pages. Lien externe
Silva, C. A. T., Kamen, A. A., & Henry, O. Intensified Influenza Virus Production in Suspension HEK293SF Cell Cultures Operated in Fed-Batch or Perfusion with Continuous Harvest [Communication écrite]. Non spécifié (19 pages). Lien externe
Šípka, M., Pavelka, M., Esen, O., & Grmela, M. (2023). Direct Poisson neural networks: learning non-symplectic mechanical systems. Journal of Physics A, 56(49), 495201 (25 pages). Disponible
Soleimani, I. (2023). Quantification of the Magnitude of Interparticle Forces in a Gas-Solid Fluidized Bed [Thèse de doctorat, Polytechnique Montréal]. Accès restreint
Soleimani, I., Shabanian, J., & Chaouki, J. (2023). Extension of Geldart classification based on the magnitude of interparticle forces. Chemical Engineering Journal, 475, 146438 (8 pages). Lien externe
Soleimani, I., Shabanian, J., & Chaouki, J. (2023). Quantification of interparticle forces in gas-agglomerated particles fluidized beds. Chemical Engineering Journal, 470, 14 pages. Lien externe
Solis-Ceballos, A., Roy, R., Golsztajn, A., Tavares, J. R., & Dumont, M.-J. (2023). Selective adsorption of Cr(III) over Cr(VI) by starch-graft-itaconic acid hydrogels. Journal of Hazardous Materials Advances, 10, 100255 (11 pages). Lien externe
Solouki, A. (2023). Process Development for Metal and Sulfur Removal from Crude Petroleum Oil Utilizing Microwave Heating Technology [Thèse de doctorat, Polytechnique Montréal]. Accès restreint
Solouki, A., Monzavi, M., & Chaouki, J. (2023). Microwave-Assisted Nickel and Vanadium Removal from Crude Petroleum Oil Using Bis(2-ethylhexyl)phosphoric Acid: A Kinetic Study. Industrial & Engineering Chemistry Research, 62(22), 8709-8718. Lien externe
Song, Y.-X., Furtos, A., Fuoco, D., Boumghar, Y., & Patience, G. S. (2023). Meta-analysis and review of cannabinoids extraction and purification techniques. Canadian Journal of Chemical Engineering, 101(6), 3108-3131. Lien externe
Stil, A., Liberelle, B., Lacomme, L., Arpin, L., Parent, P., Nanci, A., Dumont, E. C., Ould-Bachir, T., Vanni, M. P., De Crescenzo, G., & Bouchard, J.-F. (2023). A simple method for poly-D-lysine coating to enhance adhesion and maturation of primary cortical neuron cultures in vitro. Frontiers in Cellular Neuroscience, 17, 18 pages. Disponible
Sylvestre, D., Charron, J.-P., & Massicotte, B. (2023). Design of precast UHPFRC retaining walls – Experimental and numerical validations. Advances in Structural Engineering. Lien externe
ter Veer, N., Gheribi, A. E., Ocadiz-Flores, J. A., Abbink, M., de Vries, K., Vlieland, J., Couvweleers, S., Konings, R. J. M., & Smith, A. L. (novembre 2023). Experimental insight and modelling of the NaCl-ThCl4-PuCl3 fuel salt properties [Présentation]. Dans NuFuel 2023, Marseille, France. Non disponible
Thibault, É. (2023). Prise de décision liée à la conception et aux opérations en milieu industriel complexe par l'étude des données en temps réel [Thèse de doctorat, Polytechnique Montréal]. Disponible
Thibault, É., Chioua, M., McKay, M., Korbel, M., Patience, G. S., & Stuart, P. R. (2023). Experimental methods in chemical engineering: Data processing and data usage in decision-making. Canadian Journal of Chemical Engineering, 101(11), 6055-6078. Lien externe
Thibault, É., Désilets, F. L., Poulin, B., Chioua, M., & Stuart, P. R. (2023). Comparison of signal processing methods considering their optimal parameters using synthetic signals in a heat exchanger network simulation. Computers & Chemical Engineering, 178, 108380 (16 pages). Lien externe
Thibault, É., Kelly, J. D., Désilets, F. L., Chioua, M., Poulin, B., & Stuart, P. R. (2023). Industrial Data-Driven Processing Framework Combining Process Knowledge for Improved Decision Making-Part 1: Framework Development. Processes, 11(8), 2376 (37 pages). Lien externe
Tucny, J.-M., Leclaire, S., Vidal, D., & Bertrand, F. (2023). Computation of effective viscosities for rarefied gas flows using ray-tracing. International Journal of Applied and Computational Mathematics, 9(5), 110 (21 pages). Lien externe
Uzundurukan, A., Poncet, S., Boffito, D. C., & Micheau, P. (août 2023). Computed tomography-based element model of the human thorax for high-frequency chest compression therapy [Communication écrite]. 10th International Conference on Biomedical Engineering and Systems (ICBES 2023), London, UK (8 pages). Lien externe
Uzundurukan, A., Poncet, S., Boffito, D. C., & Micheau, P. (2023). Examination of the behaviour of the lungs under high-frequency chest compression airway clearance therapy. Progress in Canadian Mechanical Engineering, 3. Lien externe
Uzundurukan, A., Poncet, S., Boffito, D. C., & Micheau, P. (août 2023). Identification des informations contextuelles pertinentes à un jumeau numérique d'entreposage [Communication écrite]. 10th International Conference on Biomedical Engineering and Systems (ICBES 2023), London, United Kingdom (8 pages). Non disponible
Uzundurukan, A., Poncet, S., Boffito, D. C., & Micheau, P. (octobre 2023). Numerical analysis of energy density distribution in the human lungs under low-frequency acoustic excitation [Communication écrite]. Acoustics Week in Canada Conference, Montreal, Qc, Canada (2 pages). Lien externe
Uzundurukan, A., Poncet, S., Boffito, D. C., & Micheau, P. (2023). Realistic 3D CT-FEM for Target-based Multiple Organ Inclusive Studies. Journal of Biomedical Engineering and Biosciences, 10, 24-35. Lien externe
Vieira, D., Harvey, E., & Merle, G. (2023). Stripping metalloprotein with bismuth nanomaterials tethered on carbon surface. Applied Surface Science, 635, 7 pages. Lien externe
Viveros Santos, I., Levasseur, A., Bulle, C., Deschênes, L., & Boulay, A.-M. (2023). Modelling the influence of climate change on characterization factors for copper terrestrial ecotoxicity. Journal of Cleaner Production, 414, 137601 (16 pages). Accès restreint
Viveros Santos, I., Renaud-Gentié, C., Roux, P., Levasseur, A., Bulle, C., Deschênes, L., & Boulay, A.-M. (2023). Prospective life cycle assessment of viticulture under climate change scenarios, application on two case studies in France. Science of The Total Environment, 880, 163288. Accès restreint
Vo, M. D. (2023). Développement d'une base de données thermodynamiques pour les alliages d'aluminium au moyen de simulations atomistiques et d'expériences de DSC [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Wang, C., & Ajji, A. (2023). Development and application of low-density polyethylene-based multilayer film incorporating potassium permanganate and pumice for avocado preservation. Food Chemistry, 401, 134162 (8 pages). Lien externe
Watson, S., Pattyn, C., Mohseni Garakani, M., Ajji, A., Reuter, S., & Wertheimer, M. R. (2023). Wetting and aging behaviors for several O2 and NH3 plasma treated nanofibrous and flat film polymer materials: A comparison. Plasma Processes and Polymers, 20(6), e2200224 (14 pages). Lien externe
Wu, Q., Zhang, P., O’Leary, G., Zhao, Y., Xu, Y., Rafatian, N., Okhovatian, S., Landau, S., Valiante, T. A., Travas-Sejdic, J., & Radisic, M. (2023). Flexible 3D printed microwires and 3D microelectrodes for heart-on-a-chip engineering. Biofabrication, 15(3), 035023 (17 pages). Lien externe
Xu, Y., Ajji, A., & Heuzey, M.-C. (2023). Fast thermal responsive hydrogels consisting of electrospun fibers with highly tunable conductivity. Sensors and Actuators A: Physical, 349, 6 pages. Lien externe
Yang, H., Gallagher, R. C., Phan, A.-T., Chartrand, P., & Gheribi, A. E. (2023). A predictive approach for the compositional and temperature representation of thermal conductivity in multicomponent molten salt systems for advanced energy applications. Materials Today Energy, 38, 23 pages. Lien externe
Yang, H., Gallagher, R., Chartrand, P., & Gheribi, A. E. (2023). Development of a molten salt thermal conductivity model and database for advanced energy systems. Solar Energy, 256, 158-178. Lien externe
Yasemi, M., & Jolicoeur, M. (2023). A genome-scale dynamic constraint-based modelling (gDCBM) framework predicts growth dynamics, medium composition and intracellular flux distributions in CHO clonal variations. Metabolic Engineering, 78, 209-222. Disponible
Zambonino, M. C., Quizhpe, E. M., Mouheb, L., Rahman, A., Agathos, S. N., & Dahoumane, S. A. (2023). Biogenic Selenium Nanoparticles in Biomedical Sciences: Properties, Current Trends, Novel Opportunities and Emerging Challenges in Theranostic Nanomedicine. Nanomaterials, 13(3), 424 (70 pages). Lien externe
Zhang, C. (2023). Three-Dimensional Printing of Protein/Polysaccharide Mixed Gel Systems for Food Applications [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2023). Processing and properties of aqueous protein/polysaccharide mixture-based inks for additive manufacturing. Additive Manufacturing, 78, 103844 (12 pages). Lien externe
Zhang, Y., Liu, X., Patouillard, L., Margni, M., Bulle, C., Hua, H., & Yuan, Z. (2023). Remarkable Spatial Disparity of Life Cycle Inventory for Coal Production in China. Environmental Science & Technology, 57(41), 15443-15453. Lien externe
Zhou, M., Jiang, X., Kong, W., Li, H., Lu, F., Zhou, X., & Zhang, Y. (2023). Synergistic Effect of Dual-Doped Carbon on Mo2C Nanocrystals Facilitates Alkaline Hydrogen Evolution. Nano-micro Letters, 15(1), 166 (11 pages). Disponible
Zhou, X. (2023). Conducting Polymer Based Flexible Epidermal Patch Electrodes for Human Healthcare [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zhou, X., Kateb, P., Fan, J., Kim, J., Lodygensky, G. A., Amilhon, B., Pasini, D., & Cicoira, F. (2023). Conducting polymer films and bioelectrodes combining high adhesion and electro-mechanical self-healing. Journal of Materials Chemistry C, 10 pages. Lien externe
Zhou, X., Kateb, P., Miquet-Westphal, F., Lodygensky, A., & Cicoira, F. (2023). Soft, conductive and anti-freezing conducting polymer organohydrogels. Advanced Sensor Research, 10 pages. Lien externe
Zohra, T., Saeed, F., Ikram, A., Khan, T., Alam, S., Adil, M., Gul, A., Almawash, S., & Ayaz, M. (2023). Nanomedicine as a potential novel therapeutic approach against the dengue virus. Nanomedicine, 18(22), 1567-1584. Lien externe
