<  Retour au portail Polytechnique Montréal

Documents dont le département est "Département de génie chimique"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Sous-type de document | Aucun groupement
Nombre de documents: 265

Addison, W. N., Tran-Khanh, N., Kaartinen, M. T., Buschmann, M. D., & McKee, M. D. (septembre 2006). Binding of osteopontin to apatite crystals inhibits extracellular matrix mineralization in MC3T3-E1 osteoblast cultures [Communication écrite]. Annual Meeting American Society Bone Mineral Research, Philadelphia, PA, USA. Publié dans Journal of Bone and Mineral Research, 21(S1). Lien externe

Agha Barar Pour Tabbakhi, S. (2006). Solid dispersion in a viscous newtonian phase using a dual shaft mixer [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (2006). Numerical simulation of the rate of dross formation in continuous galvanizing baths. Iron and Steel Technology, 3(8), 93-101. Lien externe

Akrour, F., Berton, A., Hébert, P., Perrier, M., & Stuart, P. R. (janvier 2006). Method for the Analysis of Paper Machine Web Breaks [Communication écrite]. 92nd Annual Meeting Pulp & Paper Technical Association of Canada, Montréal, Québec. Non disponible

Alonso, M., Diez, F. V., Vega, A. V., Lorences, M. J., & Patience, G. S. (janvier 2006). Oxidation of butane to maleic anhydride in a simulated circulating bed and membrane reactor [Communication écrite]. 2nd Conference of the European Union Coordination Action "CO-ordination of Nanostructured Catalytic Oxides Research and Development in Europe, Greece. Non disponible

Alonso, M., Patience, G. S., Fernández, J. R., Lorences, M. J., Díez, F., Vega, A., & Cenni, R. (2006). Heat Transfer Studies in an Inorganic Membrane Reactor at Pilot Plant Scale. Catalysis Today, 118(1-2), 32-38. Lien externe

Ascanio, G., & Tanguy, P. A. (octobre 2006). Visualization of flow patterns in stirred vessels with eccentric impeller [Communication écrite]. 22nd Interamerican Congress of Chemical Engineering (CIIQ 2006) and 5th Argentinian Congress of Chemical Engineering (CAIQ 2006), Buenos Aires, Argentina. Non disponible

Ascanio, G., Brito-Bazán, M., & Tanguy, P. A. (2006). A Non-Conventional Approach for the Make-Down of Concentrated Suspensions. Chemical Engineering & Technology, 29(8), 968-973. Lien externe

Ascanio, G., Carreau, P., & Tanguy, P. A. (2006). High-Speed Roll Coating With Complex Rheology Fluids. Experiments in Fluids, 40(1), 1-14. Lien externe

Aucoin, M. G., McMurray-Beaulieu, V., Poulin, F., Boivin, E. B., Chen, J., Ardelean, F. M., Cloutier, M., Choi, Y. J., Miguez, C. B., & Jolicoeur, M. (2006). Identifying conditions for inducible protein production in E. coli: combining a fed-batch and multiple induction approach. Microbial Cell Factories, 5(1). Disponible

Aucoin, M. G., Perrier, M., & Kamen, A. A. (2006). Production of Adeno-Associated Viral Vectors in Insect Cells Using Triple Infection: Optimization of Baculovirus Concentration Ratios. Biotechnology and Bioengineering, 95(6), 1081-1092. Lien externe

Barailler, F., Heniche, M., & Tanguy, P. A. (2006). Cfd Analysis of a Rotor-Stator Mixer With Viscous Fluids. Chemical Engineering Science, 61(9), 2888-2894. Lien externe

Becaert, V., & Deschênes, L. (2006). Using Soil Health to Assess Ecotoxicological Impacts of Pollutants on Soil Microflora. Reviews of Environmental Contamination and Toxicology, 188, 127-148. Lien externe

Becaert, V., Samson, R., & Deschênes, L. (2006). Effect of 2,4-D contamination on soil functional stability evaluated using the relative soil stability index (RSSI). Chemosphere, 64(10), 1713-1721. Lien externe

Bernard, C., El Abras, M., Menard, M., Halle, J. P., Yahia, L., & De Crescenzo, G. Characterization of adhesion processes between alginate and PLL for micro encapsulation application [Communication écrite]. 29th Annual Meeting of the Adhesion Society. Non disponible

Bernard, C., Leduc, A., Barbeau, J., Saoudi, B., Yahia, L., & De Crescenzo, G. (2006). Validation of Cold Plasma Treatment for Protein Inactivation: a Surface Plasmon Resonance-Based Biosensor Study. Journal of physics. D, Applied physics, 39(16), 3470-3478. Lien externe

Berton, A., Perrier, M., & Stuart, P. R. (avril 2006). Opportunity for Real-Time Optimization in a Newsprint Mill : A simulation Case study [Communication écrite]. International Symposium on Advanced Control of Chemical Processes (ADCHEM), Gramado, Brésil. Lien externe

Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Continuity Development in Polymer Blends of Very Low Interfacial Tension. Polymer, 47(8), 2760-2771. Lien externe

Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension. Journal of polymer science. Part B, Polymer physics, 44(14), 1919-1929. Lien externe

Bhadane, P. A., Virgilio, N., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. (2006). Effect of Dynamic Vulcanization on Co-Continuous Morphology. AICHE Journal, 52(10), 3411-3420. Lien externe

Billotte, C., Carreau, P., & Heuzey, M.-C. (2006). Rheological characterization of a solder paste for surface mount applications. Rheologica Acta, 45(4), 374-386. Lien externe

Bonnot, S. (2006). Caractérisation des profils d'écoulements visqueux dans un mélangeur coaxial [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Bonvin, D., Srinivasan, B., & Hunkeler, D. (2006). Control and Optimization of Batch Processes. IEEE Control Systems Magazine, 26(6), 34-45. Lien externe

Bouhenchir, H., Cabassud, M., & Le Lann, M. V. (2006). Predictive functional control for the temperature control of a chemical batch reactor. Computers & Chemical Engineering, 30(6-7), 1141-1154. Lien externe

Brault, J. M., Comeau, Y., Perrier, M., & Stuart, P. R. (octobre 2006). Hybrid modelling of a pulp and paper mill activated sludge treatment plant: Steady-state results [Communication écrite]. 56e Congrès Canadien de génie chimique, Sherbrooke, QC. Non disponible

Brocart, B. (2006). Étude de la mise en émulsion de fluides pétroliers en contexte industriel [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Buergler, B. E., Grundy, A. N., & Gauckler, L. J. (2006). Thermodynamic Equilibrium of Single-Chamber Sofc Relevant Methane-Air Mixtures. Journal of The Electrochemical Society, 153(7), A1378-A1385. Lien externe

Buschmann, M. D. (octobre 2006). Hybrid Biomaterials for Regenerative Medicine [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Buschmann, M. D., Hoemann, C. D., Shive, M. S., Rossomacha, E., Chevrier, A., & Hurtig, M. B. (septembre 2006). Hybrid Biomaterials Composed of Chitosan and Blood Improve Cartilage Repair in Animal Models [Communication écrite]. Transactions 10th International Conference on Chitin and Chitosan, Montpellier, France. Non disponible

Cabaret, F., Fradette, L., & Tanguy, P. A. (juin 2023). Characterization of macro-mixing kinetics using advanced image analysis [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible

Cabaret, F., Rivera, C. A., Heniche, M., Fradette, L., & Tanguy, P. A. (juin 2023). Mixing performance of dual eccentric turbines in stirred tanks [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible

Cabaret, F., Rivera, C. A., Heniche, M., Fradette, L., & Tanguy, P. A. (juin 2023). Performance of Dual Shaft Mixing System in Viscous Newtonian Liquids Mixing [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible

Castegnier, F., Ross, N., Chapuis, R. P., Deschênes, L., & Samson, R. (2006). Long-term persistence of a nutrient-starved biofilm in a limestone fracture. Water Research, 40(5), 925-934. Lien externe

Changoor, A., Quenneville, E., Garon, M., Cloutier, L., Légaré, A., Hurtig, M. B., & Buschmann, M. D. (novembre 2006). Streaming potential-based arthroscopic device discerns topographical differences in cartilage covered and unconvered by meniscus in ovine stifle joints [Communication écrite]. Canadian Arthritis Network Annual Meeting, Winnipeg. Non disponible

Chenite, A., Gori, S., Shive, M., Desrosiers, E., & Buschmann, M. D. (2006). Monolithic Gelation of Chitosan Solutions Via Enzymatic Hydrolysis of Urea. Carbohydrate polymer, 64(3), 419-424. Lien externe

Chevrier, A., Hoemann, C. D., Sun, J., & Buschmann, M. D. (janvier 2006). Chitosan-glycerol phosphate/blood implants augment cell recruitment, transient vascularisation and subchdonral bone remodeling in drill cartilage defects [Communication écrite]. Transactions International Society for Cartilage Repair, San Diego, USA. Non disponible

Chevrier, A., Hoemann, C. D., Sun, J., & Buschmann, M. D. (mars 2006). Chitosan-glycerol phosphate/blood implants augment cell recruitment, transient vascularisation and subchdonral bone remodeling in drill cartilage defects [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible

Cho, B. U., Garnier, G., Van De Ven, T. G. M., & Perrier, M. (2006). A Bridging Model for the Effects of a Dual Component Flocculation System on the Strength of Fiber Contacts in Flocs of Pulp Fibers: Implications for Control of Paper Uniformity. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 287(1-3), 117-125. Lien externe

Cho, J. Y., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Chitosan and Glycerophosphate Concentration Dependence of Solution Behaviour and Gel Point Using Small Amplitude Oscillatory Rheometry. Food Hydrocolloids, 20(6), 936-945. Lien externe

Cho, J. Y., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Viscoelastic Properties of Chitosan Solutions: Effect of Concentration and Ionic Strength. Journal of Food Engineering, 74(4), 500-515. Lien externe

Cho, J., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Effect of Urea on Solution Behavior and Heat-Induced Gelation of Chitosan-Beta-Glycerophosphate. Carbohydrate polymer, 63(4), 507-518. Lien externe

Cornejo, F., Samson, R., & Stuart, P. R. (février 2006). Greenhouse gas mitigation implications due to the implementation of CO-generation and increased recycled paper production at an integrated newsprint mill [Communication écrite]. 92nd Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2006). Non disponible

Cotter, L., & Stuart, P. R. (octobre 2006). Mechanistic model for nutrient transformations in pulp & paper activated sludge wastewater treatment plants [Communication écrite]. 56e Congrès Canadien de génie chimique, Sherbrooke, QC. Non disponible

Cougnon, P., Dochain, D., Guay, M., & Perrier, M. (2006). Real-Time Optimization of a Tubular Reactor With Distributed Feed. AICHE Journal, 52(6), 2120-2128. Lien externe

Dakshinamoorthy, D., Khopkar, A., Louvar, J. F., & Ranade, V. V. (2006). CFD Simulation of Shortstopping Runaway Reactions in Vessels Agitated With Impellers and Jets. Journal of Loss Prevention in the Process Industries, 19(6), 570-581. Lien externe

Daoust, C. M., Bastien, C., & Deschênes, L. (2006). Influence of Soil Properties and Aging on the Toxicity of Copper on Compost Worm and Barley. Journal of Environmental Quality, 35(2), 558-567. Lien externe

De Dobbeleer, C., Cloutier, M., Fouilland, M., Legros, R., & Jolicoeur, M. (2006). A high-rate perfusion bioreactor for plant cells. Biotechnology and Bioengineering, 95(6), 1126-1137. Lien externe

Deschenes, J. S., Desbiens, A., Perrier, M., & Kamen, A. (2006). Multivariable Nonlinear Control of Biomass and Metabolite Concentrations in a High-Cell-Density Perfusion Bioreactor. Industrial & Engineering Chemistry Research, 45(26), 8985-8997. Lien externe

Deschenes, J. S., Desbiens, A., Perrier, M., & Kamen, A. (2006). Use of Cell Bleed in a High Cell Density Perfusion Culture and Multivariable Control of Biomass and Metabolite Concentrations. Asia-Pacific Journal of Chemical Engineering, 1(1-2), 82-91. Lien externe

Devals, C., Fuxman, A., Bertrand, F., Forbes, J. F., & Hayes, R. E. (janvier 2006). Combustion of Lean Methane in a Catalytic Flow Reversal Reactor [Communication écrite]. COMSOL Users Conference, Boston, USA. Non disponible

Doucet, J., Bertrand, F., & Chaouki, J. (avril 2006). Experimental characterization of the chaotic dynamics of cohesionless particles in a V-blender using radioactive particle tracking [Communication écrite]. AIChE Spring National Meeting, Orlando, FL, United States. Non disponible

Doucet, J., Bertrand, F., Hudon, N., & Chaouki, J. (novembre 2006). Modeling of granular mixing using a DEM-based Markov Process Method [Communication écrite]. 2006 AIChE Annual Meeting, San Francisco, CA, USA. Non disponible

Doucet, J., Chaouki, J., & Bertrand, F. (octobre 2006). Determination of macroscopic mixing properties of granular materials from particle tracking experiments [Communication écrite]. 56th CSChE Annual Conference, Sherbrooke, Qc, Canada. Non disponible

Doucet, J., Chaouki, J., & Bertrand, F. (octobre 2006). Modeling of granular mixing dynamics using markov chains and the discrete element method [Communication écrite]. 56th CSChE Annual Conference, Sherbrooke, Qc, Canada. Non disponible

Dubois, C., Rajabian, M., & Rodrigue, D. (2006). Polymerization compounding of polyurethane-fumed silica composites. Polymer Engineering and Science, 46(3), 360-371. Lien externe

Dumais, Y. (2006). Optimisation en temps réel avec projection sur contraintes actives : application à une usine de production du mononère[i.e monomère] d'acétate de vinyle [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Dupla, M., Comeau, Y., Parent, S., Villemur, R., & Jolicoeur, M. (2006). Design optimization of a self-cleaning moving-bed bioreactor for seawater denitrification. Water Research, 40(2), 249-258. Lien externe

Dupuis, A., Gao, Y., Guo, N., Pone, E., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (septembre 2006). Biodegradable, double-core, porous optical fiber [Communication écrite]. 15th International Conference on Plastic Optical Fibers, Seoul, Korea. Non disponible

Dupuis, A., Gao, Y., Guo, N., Pone, E., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (mai 2006). Biodegradable, double-core, porous optical fiber [Communication écrite]. CLEO 2006, Long Beach, CA, USA. Lien externe

Dupuis, A., Gao, Y., Guo, N., Pone, E., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (octobre 2006). Biodegradable, double-core, porous optical fiber for sensing applications [Communication écrite]. 18th International Conference on Optical Fiber Sensors, Cancun, Mexico. Lien externe

Dussault, M. (2006). Validation d'un indice de la stabilité relative des sols par l'évaluation de l'activité enzymatique dans le contexte d'une contamination au cuivre [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Edwards, B. J., Beris, A. N., & Grmela, M. (2006). The Dynamical Behavior of Liquid Crystals: A Continuum Description through Generalized Brackets. Molecular Crystals and Liquid Crystals, 201(1), 51-86. Lien externe

Esmaeili, B., Chaouki, J., & Dubois, C. (2006). Polymerization compounding on the surface of zirconia nanoparticles. Macromolecular Symposia, 243(1), 268-276. Lien externe

Farhat, M., Rivera, C. A., Fradette, L., Heniche, M., & Tanguy, P. A. (juin 2023). Numerical and experimental study of coaxial mixers for viscous Newtonian and non-Newtonian fluids [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible

Fatahi, S. (2006). Correlation between different micro-structural parameters with physical/mechanical properties of polyethylene blown films [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Fatahi, S., Ajji, A., & Lafleur, P. (mai 2006). Correlations of tensile modulus for polyethylene blown films with microstructural parameters [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe

Favez, J. Y., Mullhaupt, P., Srinivasan, B., & Bonvin, D. (2006). Attraction Region of Planar Linear Systems With One Unstable Pole and Saturated Feedback. Journal of Dynamical and Control Systems, 12(3), 331-355. Lien externe

Favis, B. D., Yuan, Z., & Riscanu, D. (2006). Thermoplastic starch and synthetic polymer blends and method of making. (Demande de brevet no WO2006116861). Lien externe

Foucault, S., Ascanio, G., & Tanguy, P. A. (2006). Mixing Times in Coaxial Mixers With Newtonian and Non-Newtonian Fluids. Industrial & Engineering Chemistry Research, 45(1), 352-359. Lien externe

Fradette, L., Li, H. Z., Choplin, L., & Tanguy, P. A. (2006). Gas/Liquid Dispersions With a Smx Static Mixer in the Laminar Regime. Chemical Engineering Science, 61(11), 3506-3518. Lien externe

Fraguio, M. S., Cassanello, M. C., Larachi, F., & Chaouki, J. (2006). Flow Regime Transition Pointers in Three-Phase Fluidized Beds Inferred From a Solid Tracer Trajectory. Chemical Engineering and Processing, 45(5), 350-358. Lien externe

Frei, K. M., Cameron, D., Jasmin, S., & Stuart, P. R. (2006). Novel Sludge Drying Process for Cost-Effective on-Site Sludge Management. Pulp and Paper-Canada, 107(4), 47-53. Non disponible

Gao, Y., Guo, N., Gauvreau, B., Rajabian, M., Skorobogata, O., Pone, E., Zabeida, O., Martinu, L., Dubois, C., & Skorobogatiy, M. A. (2006). Consecutive Solvent Evaporation and Co-Rolling Techniques for Polymer Multilayer Hollow Fiber Preform Fabrication. Journal of Materials Research, 21(9), 2246-2254. Lien externe

Gao, Y., Guo, N., Gauvreau, B., Rajabian, M., Skorobogata, O., Pone, E., Zabeida, O., Martinu, L., Dubois, C., & Skorobogatiy, M. A. (septembre 2006). Consecutive solvent evaporation and co-rolling techniques for polymer multilayer hollow fiber preform fabrication [Communication écrite]. 15th International Conference on Plastic Optical Fibers, Seoul, Korea. Non disponible

Gaudreault, C., Bisson, J., Samson, R., & Stuart, P. R. (octobre 2006). Assessing energy projects at an integrated newsprint mill using LCA: Impact of selected methodological choices [Communication écrite]. 56e Congrès canadien de génie chimique, Sherbrooke, QC. Non disponible

Gaudreault, C., Martin, G., Samson, R., & Stuart, P. R. (janvier 2006). Using Life Cycle Assessment (LCA) for the Evaluation of the Environmental Benefits of Kraft Mill Modifications [Communication écrite]. 92nd Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2006), Montréal, Québec. Non disponible

Gaudreault, C., Samson, R., & Stuart, P. R. (novembre 2006). Integrating Life Cycle Thinking into the Environmental Management System of Pulp and Paper Mills [Communication écrite]. SETAC North American 27th Annual Meeting, Montréal, Québec. Lien externe

Gaudreault, C., Samson, R., & Stuart, P. R. (août 2006). Surveys of LCA Applications in the Pulp and Paper Industry [Communication écrite]. 17th International Congress of Chemical and Process Engineering, Prague, Czech Republic. Non disponible

Gaudreault, C., Wising, U., Martin, G., Samson, R., & Stuart, P. R. (février 2006). Environmental benchmarking of energy-related kraft mill modifications using LCA [Communication écrite]. 92nd Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2006). Non disponible

Gigout, A., Buschmann, M. D., & Jolicoeur, M. (octobre 2006). Chondrocytes cultured in stirred suspension bioreactors with plruonic F68 maintain viability with limited cell aggregation and internalize pluronic F68 [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Gigout, A., Buschmann, M. D., & Jolicoeur, M. (janvier 2006). Chondrocytes cultured in stirred suspension bioreactors with plruonic F68 maintain viability with limited cell aggregation and internalize pluronic F68 [Communication écrite]. Tissue Engineering and Regenerative Medecine International Society, Rotterdam, The Netherlands. Non disponible

Gigout, A., Jolicoeur, M., & Buschmann, M. D. (janvier 2006). Characterisation and control of chondrocyte aggregation in suspension culture [Communication écrite]. Transactions International Society for Cartilage Repair, San Diego, USA. Non disponible

Gigout, A., Jolicoeur, M., & Buschmann, M. D. (octobre 2006). Chondrocyte aggregation in suspension culture is mediated by integrins for freshly isolated chondrocytes and by integrins and N-cadherins for passaged chondrocytes [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Gigout, A., Jolicoeur, M., & Buschmann, M. D. (janvier 2006). Chondrocyte aggregation in suspension culture is mediated by integrins for freshly isolated chondrocytes and by integrins and N-cadherins for passaged chondrocytes [Communication écrite]. Tissue Engineering and Regenerative Medecine International Society, Rotterdam, The Netherlands. Non disponible

Giguere, R., Bertrand, F., & Tanguy, P. A. (2006). A Three-Dimensional Mesh Refinement Strategy for the Simulation of Fluid Flow With a Fictitious Domain Method. Computers & Chemical Engineering, 30(3), 453-466. Lien externe

Gingras, J.-P. (2006). Émulsification de bitume en phase concentrée [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Grace, J. R., Chaouki, J., & Pugsley, T. (2006). Fluidized Bed Reactor. Dans Sunggyu, L. (édit.), Encyclopedia of chemical processing (p. 1009-1020). Lien externe

Gros, S., Srinivasan, B., & Bonvin, D. (2006). Robust predictive control based on neighboring extremals. Journal of Process Control, 16(3), 243-253. Lien externe

Guillaud, S., Heuzey, M.-C., Carreau, P., & Polverari, M. (avril 2023). Rheology of Hydrophobically Modified Polyelectrolytes [Communication écrite]. 3rd Annual European Rheology Conference, Crete, Grèce. Non disponible

Guo, M. C., Heuzey, M.-C., & Carreau, P. (septembre 2006). Occurrence of Surface Defects in TPO Injection Foamed Automotive Parts [Communication écrite]. 5th International Conference on Foam Processing & Technology (FOAMS TopCon 2006), Chicago, Ill.. Non disponible

Guo, N., Gao, Y., Dupuis, A., Pone, E., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (septembre 2006). Fabrication of the hollow all-polymer Bragg fibers [Communication écrite]. 15th International Conference on Plastic Optical Fibers, Seoul, Korea. Non disponible

Haderlein, A., Legros, R., & Ramsay, B. A. (2006). Pyrene Mineralization Capacity Increases With Compost Maturity. Biodegradation, 17(4), 293-302. Lien externe

Hamdine, M., Heuzey, M.-C., & Bégin, A. (2006). Viscoelastic properties of phosphoric and oxalic acid-based chitosan hydrogels. Rheologica Acta, 45(5), 659-675. Lien externe

Harrison, R. P., & Stuart, P. R. (2006). Linking Pulp Variations to Tmp Operation by Better Selection and Treatment of Process Data. Tappi Journal, 5(8), 17-23. Lien externe

Harvey, J.-P. (2006). Développement d'une base de données thermodynamique pour la modélisation de la solubilité d'hydrogène dans les alliages d'aluminium [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Hashemi, S. A., Ait-Kadi, A., & Carreau, P. (2006). The influence of surface treatment of fibers on the properties of glass fiber/ PA 6,6 composites. Journal of Polymer Engineering, 26(1), 1-19. Lien externe

Hashemi, S. A., Sahraian, R., Lafleur, P., & Stoeffler, K. (2006). Focus Ion Beam Preparation of Transmission Electron Microscope Sample in Polymer Clay Nanocomposite. Iranian Polymer Journal, 15(7), 539-545. Lien externe

Hekmat Ardakan, A. (2006). Rheological characteristics of hypereutectic Al-Si (A390) in the semi-solid state [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Henderson, J. E., Amizuka, N., Buschmann, M. D., & Ornitz, D. M. (septembre 2006). Fibroblast Growth Factor Signaling in the Adult Skeleton [Communication écrite]. Transactions 16th International Microscopy Congress, Sapporo, Japan. Non disponible

Heniche, M., & Tanguy, P. A. (2006). A new element-by-element method for trajectory calculations with tetrahedral finite element meshes. International Journal for Numerical Methods in Engineering, 67(9), 1290-317. Lien externe

Henry, O., Perrier, M., & Kamen, A. (avril 2006). Monitoring the physiological state of mammalian cell perfusion processes by on-line estimation of intracellular fluxes [Communication écrite]. International Symposium on Advanced Control of Chemical Processes, Gramado, Brazil. Lien externe

Hermann, A., Bednar, F., Perrier, M., Paradis, J., & Paris, J. (2006). Dynamics of Whitewater Consistency of a Pilot Paper Machine Using a Peo/Cofactor Retention Aid System. Canadian Journal of Chemical Engineering, 84(5), 597-603. Lien externe

Heyrman, M., & Chartrand, P. (2006). Thermodynamic evaluation and optimization of the Ca-Si system. Journal of Phase Equilibria and Diffusion, 27(3), 220-230. Lien externe

Hoang, M. P., Lavalée, G., Sun, J., El-Gabalawy, H., McKee, M. D., Tran-Khanh, N., & Hoemann, C. D. (octobre 2006). Effect of chitosan on bone marrow stromal cell osteogenesis [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Hoemann, C. D., Chenite, A., Sun, J., Hurtig, M., Serreqi, A., Zhan, L., Rossomacha, E., & Buschmann, M. D. (novembre 2006). Cytocompatible gel formation of chitosan-glycerol phosphate solutions supplemented with hydroxyl ethyl cellulose is due to the presence of glyoxal [Communication écrite]. Canadian Arthritis Network Annual Meeting, Winnipeg. Non disponible

Hoemann, C. D., Chenite, A., Sun, J., Serreqi, A., Hurtig, M., Lu, Z., & Buschmann, M. D. (octobre 2006). Crosslinked chitosan hydrogels for cartilage repair applications [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Hoemann, C. D., Hurtig, M., Rossomacha, E., Shive, M. S., & Buschmann, M. D. (janvier 2006). Chitosan-glycerol phosphate/blood clots adhere more than marrow-dervide clots to ovine microfracture defects [Communication écrite]. Transactions International Society for Cartilage Repair, San Diego, USA. Non disponible

Hoemann, C. D., Ma, O., Lavertu, M., Lavalée, G., Sun, J., El-Gabalawy, H., Tran-Khanh, N., & Winnik, F. (mai 2006). Controlled derivatization of chitosan with rhodamine B-isothiocyanate to study the influence of chitosan structure on stromal cell recognition and uptake [Communication écrite]. Can Workshop on Pre-Clinical OA models, Montréal, Québec. Non disponible

Hoemann, C. D., Sun, J., Chevrier, A., McKee, M. D., & Buschmann, M. D. (janvier 2006). Chitosan-glycerol phosphate/blood implants increase subchondral bone porosity and integrated hyaline cartilage repair in marrow-stimulated defects [Communication écrite]. Transactions International Society for Cartilage Repair, San Diego, USA. Non disponible

Hoemann, C. D., Sun, J., Chevrier, A., McKee, M. D., & Buschmann, M. D. (mars 2006). Chitosan-glycerol phosphate/blood implants increase subchondral bone porosity and integrated hyaline cartilage repair in marrow-stimulated defects [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible

Hudon, N., Guay, M., Perrier, M., & Dochain, D. (avril 2006). Nonlinear model predictive control for optimal discontinuous drug delivery [Communication écrite]. 6th IFAC Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Gramado, Brazil. Publié dans IFAC Proceedings Volumes, 39(2). Lien externe

Iliescu, M., Chevrier, A., Shive, M. S., McKee, M. D., Hoemann, C. D., & Buschmann, M. D. (janvier 2006). Ultrastructure of chitosan-glycerol phosphate/blood clots for cartilage repair [Communication écrite]. Transactions International Society for Cartilage Repair, San Diego, USA. Non disponible

Iliescu, M., Chevrier, A., Shive, M. S., McKee, M. D., Hoemann, C. D., & Buschmann, M. D. (mars 2006). Ultrastructure of chitosan-glycerol phosphate/blood clots for cartilage repair [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible

Iranshahi, A. (2006). Hydrodynamics characterization of the maxblend impeller [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Iranshahi, A., Heniche, M., Bertrand, F., & Tanguy, P. A. (2006). Numerical Investigation of the Mixing Efficiency of the Ekato Paravisc Impeller. Chemical Engineering Science, 61(8), 2609-2617. Lien externe

Janssen, M., Cornejo, F., Riemer, K., Lavallee, H.-C., & Stuart, P. R. (2006). Techno-economic considerations for DIP production increase and implementation of cogeneration at an integrated newsprint mill. Pulp and Paper Canada, 107(9), 33-37. Non disponible

Janssen, M., Naliwajka, P., & Stuart, P. R. (février 2006). Using process-based cost modeling to evaluate process modernization alternatives [Communication écrite]. 92nd Annual Meeting Preprints-Book B. Non disponible

John, R. C., Pelton, A., Thompson, W. T., Young, A. L., & Wright, I. G. (octobre 2006). ASSET Technology Update for Analyzing and Predicting Corrosion in High Temperature Gases [Communication écrite]. Materials Science & Technology 2006 Conference and Exhibition, Cincinnati, OH. Lien externe

Jolliet, O., Margni, M., Deschênes, L., Gigante, F., & Rochat, D. (septembre 2006). Multicontinental intake fractions for human toxicity assessment [Résumé]. International Conference on Environmental Epidemiology and Exposure (ISEE/ISEA 2006), Paris, France. Publié dans Epidemiology, 17(6). Lien externe

Jolliet, O., Rosenbaum, R., Chapman, P. M., Mckone, T., Margni, M., Scheringer, M., Van Straalen, N., & Wania, F. (2006). Establishing a Framework for Life Cycle Toxicity Assessment - Findings of the Lausanne Review Workshop. International Journal of Life Cycle Assessment, 11(3), 209-212. Lien externe

Kang, Y.-B., Jung, I.-H., & Lee, H.-G. (2006). Critical Thermodynamic Evaluation and Optimization of the MnO-SiO₂-"TiO₂"-"Ti₂O₃" System. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 30(3), 226-234. Lien externe

Kang, Y.-B., Jung, I.-H., & Lee, H.-G. (2006). Critical Thermodynamic Evaluation and Optimization of the Mno-TiO₂-Ti₂O₃ System. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 30(3), 235-247. Lien externe

Karim, M. M., Svitkin, Y. V., Kahvejian, A., De Crescenzo, G., Costa-Mattioli, M., & Sonenberg, N. (2006). A Mechanism of Translational Repression by Competition of Paip2 With Eif4g for Poly(a) Binding Protein (Pabp) Binding. Proceedings of the National Academy of Sciences of the United States of America, 103(25), 9494-9499. Lien externe

Kirchnerova, J., Larachi, F., Le Van Mao, R., & Zargarian, D. (2006). 18th Canadian Symposium on Catalysis, Montréal, May 16-19, 2004 - Preface. Topics in Catalysis, 37(2-4), 73-73. Lien externe

Klvana, M., Chen, J. K., Lepine, F., Legros, R., & Jolicoeur, M. (2006). Analysis of Secondary Metabolites From Eschscholtzia Californica by High-Performance Liquid Chromatography. Phytochemical Analysis, 17(4), 236-242. Lien externe

Kristian-Kaarsholm, M., Nerlow, J., Chaouki, J., & Patience, G. S. (septembre 2006). Activity Profile of ZSM-5 for Methanol-to-Olefins [Communication écrite]. 19 International Symposia on Chemical Reaction Engineering, Potsdam, Germany. Non disponible

Laflamme-Mayer, M., & Stuart, P. R. (octobre 2006). Process-based approach for supply chain analysis: Application in the Pulp and Paper Industry [Communication écrite]. 56e Congrès Canadien de génie chimique, Sherbrooke, QC. Non disponible

Laflamme-Mayer, M., Riemer, K., Linkewich, J., & Stuart, P. R. (février 2006). Development of a process-based business model suitable for supply chain management [Communication écrite]. 92nd Annual Meeting Preprints-Book B. Non disponible

Lafourcade, S. (2006). Méthodologie pour la réduction simultanée eau-énergie dans les usines intégrées de papier journal [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Lafourcade, S., Fairbank, M., & Stuart, P. R. (février 2006). Roadmap to minimum energy and water use for integrated newsprint mills [Communication écrite]. 92nd Annual Meeting Preprints-Book A. Non disponible

Lama Bustinza, I. (2006). Controllability limitations of TMP-refining processes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Lama, I., Perrier, M., & Stuart, P. R. (2006). Controllability analysis of a TMP-newsprint refining process. Pulp & Paper Canada, 107(10), 44-48. Non disponible

Lama, I., Perrier, M., & Stuart, P. R. (juin 2006). Detecting the Inherent Operating LImitations of a TMP-Refining Process [Communication écrite]. Control Systems 2006 Conference, Tampere, Finland. Non disponible

Lama, I., Perrier, M., & Stuart, P. R. (2006). An empirical model for predicting motor load changes due to plate wear in TMP-refiners. Nordic Pulp & Paper Research Journal, 21(4), 527-533. Lien externe

Lama, I., Perrier, M., & Stuart, P. R. (février 2006). Modeling the effect of plate age on the operation of TMP-refiners [Communication écrite]. 92nd Annual Meeting Preprints-Book B. Non disponible

Lama, I., Perrier, M., & Stuart, P. R. (2006). Optimal operation of TMP-newsprint refiners. Nordic Pulp & Paper Research Journal, 21(4), 534-541. Lien externe

Lavertu, M., Filion, D., Schmid, A., Zayani, M., & Buschmann, M. D. (septembre 2006). Studies on the mechanism of thermal gelation of chitosan-glycerol phosphate solutions [Communication écrite]. Transactions 10th International Conference on Chitin and Chitosan, Montpellier, France. Non disponible

Lavertu, M., Filion, D., Schmid, A., Zayani, M., & Buschmann, M. D. (octobre 2006). Studies on the mechanism of thermal gelation of chitosan-glycerol phosphate solutions [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, Québec, Canada. Non disponible

Lavertu, M., Méthot, S., Tran-Khanh, N., & Buschmann, M. D. (2006). High Efficiency Gene Transfer Using Chitosan/DNA Nanoparticles With Specific Combinations of Molecular Weight and Degree of Deacetylation. Biomaterials, 27(27), 4815-4824. Lien externe

Laviolette, J.-P., Duchastel-Légaré, J., Patience, G. S., LaMarca, C., & Chaouki, J. (décembre 2006). Propane oxidation induction time: fluid bed freeboard characterization [Communication écrite]. CHEMCON 2006, Bharuch, India. Non disponible

Lécuyer, H. (2006). Modélisation numérique de l'écoulement de suspensions dans les procédés de couchage par rouleau de transfert [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Lécuyer, H. A., Bertrand, F., Tanguy, P. A., Mmbaga, J. P., & Hayes, R. E. (janvier 2006). Computer Modelling of Deformable non-Newtonian Flow Using Comsol Multiphysics [Communication écrite]. COMSOL User Conference, Las Vegas, USA. Non disponible

Leduc, M., Tikhomiroff, C., Cloutier, M., Perrier, M., & Jolicoeur, M. (2006). Development of a kinetic metabolic model: Application to Catharanthus roseus hairy root. Bioprocess and Biosystems Engineering, 28(5), 295-313. Lien externe

Lee, K., Savadogo, O., Ishihara, A., Mitsushima, S., Kamiya, N., & Ota, K.- (2006). Methanol-Tolerant Oxygen Reduction Electrocatalysts Based on Pd-3d Transition Metal Alloys for Direct Methanol Fuel Cells. Journal of The Electrochemical Society, 153(1), A20-A24. Lien externe

Lefebvre, S. (2006). Hydrodynamique des lits fluidisés à trois phases : mécanismes convectif et dispersif [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Lefebvre, S., Guy, C., & Chaouki, J. (septembre 2006). A Convective/Dispersive Solid Phase Mixing Model for Three-Phase Fluidized Bed Reactors [Communication écrite]. 19th International Symposium On Chemical Reaction Engineering, Berlin, Germany. Non disponible

Lemieux, M. (2006). Étude comparative du mélange granulaire à écoulement libre dans un mélangeur en V et un mélangeur simple cône [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Lemieux, M., Bertrand, F., Chaouki, J., & Gosselin, P. (janvier 2006). Experimental and numerical comparative study of cohesionless granular mixing in a bin-blender and a V-blender [Communication écrite]. 5th World Congress on Particle Technology, Orlando, USA. Lien externe

Lemieux, M., Chaouki, J., & Bertrand, F. (octobre 2006). Comparative study of cohesionless granular mixing in bin- and v-blenders [Communication écrite]. 56th CSChE Annual Conference, Sherbrooke, Qc, Canada. Non disponible

Lemieux, M., Gosselin, P., Bertrand, F., & Chaouki, J. (octobre 2006). Granular mixing properties of cohesionless granules in bin- and v-blenders [Communication écrite]. 2006 AAPS Annual Meeting, San Antonio, Texas, USA. Non disponible

Lessard, P. (2006). Caractérisation et modélisation de la croissance d'une suspension de cellules végétales [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Lim, N. S., Kozlov, G., Chang, T.-C., Groover, O., Siddiqui, N., Volpon, L., De Crescenzo, G., Shyu, A.-B., & Gehring, K. (2006). Comparative Peptide Binding Studies of the Pabc Domains From the Ubiquitin-Protein Isopeptide Ligase Hyd and Poly(a)-Binding Protein - Implications for Hyd Function. Journal of Biological Chemistry, 281(20), 14376-14382. Lien externe

Lindberg, D., Backman, R., & Chartrand, P. (2006). Thermodynamic evaluation and optimization of the (Na2SO4+ K2SO4+ Na2S2O7+ K2S2O7) system. The Journal of Chemical Thermodynamics, 38(12), 1568-1583. Lien externe

Lindberg, D., Backman, R., Hupa, M., & Chartrand, P. (2006). Thermodynamic Evaluation and Optimization of the (Na+K+S) System. Journal of Chemical Thermodynamics, 38(7), 900-915. Lien externe

Lioussanne, L., Jolicoeur, M., & St-Arnaud, M. Is the Inhibition of Phytophthora Nicotianae in Tomato Roots Induced by Arbuscular Mycorrhizae Fungi Related to Changes in Root Exudation? [Communication écrite]. Réunion annuelle 2006 de la Société canadienne de phytopathologie, Québec, Québec. Publié dans Canadian Journal of Plant Pathology, 28(2). Lien externe

Lioussanne, L., Keough, A., Jolicoeur, M., & St-Arnaud, M. Antagonism of Glomus Mosseae Spore-Associated Bacteria on Phytophthora Nicotianae, in Vitro. [Résumé]. Réunion annuelle 2006 de la Société canadienne de phytopathologie, Québec, Québec. Publié dans Canadian Journal of Plant Pathology, 28(2). Lien externe

Litto, R., Hayes, R. E., Sapoundjiev, H., Fuxman, A., Forbes, F., Liu, B., & Bertrand, F. (2006). Optimization of a Flow Reversal Reactor for the Catalytic Combustion of Lean Methane Mixtures. Catalysis Today, 117(4), 536-542. Lien externe

Longtin, G. (2006). Study of the behaviour of acetals in the proton exchange fuel cell's cathode [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Lorences, M. J., Laviolette, J.-P., Patience, G. S., Alonso, M., & Diez, F. V. (2006). Fluid Bed Gas RTD: Effect of Fines and Internals. Powder Technology, 168(1), 1-9. Lien externe

Lorences, M. J., Patience, G. S., Cenni, R., Diez, F., & Coca, J. (2006). VPO Transient Lattice Oxygen Contribution. Catalysis Today, 112(1-4), 45-48. Lien externe

Ma, P. L., Buschmann, M. D., & Winnik, F. (octobre 2006). Thermodynamic Analysis of the Interaction between DNA and Chitosan and Stability of DNA/Chitosan Complexes for Gene Transfer [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Mabrouk, R. (2006). Hydrodynamique de l'écoulement diphasique solide-gaz, dans un réacteur à lit fluidisé circulant interne [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

MacQueen, L. A., Wertheimer, M. R., & Buschmann, M. D. (mai 2006). Micro-fabrication plasma-assistée de systèmes d'électrodes pour l'électro-manipulation de cellules mammifères [Communication écrite]. ACFAS 74e Congrès Association francophone pour le savoir, Montréal, Québec. Non disponible

MacQueen, L. A., Wertheimer, M. R., & Buschmann, M. D. (juin 2006). Plasma-assisted microfabrication of planar electrode structures for electromanipulation of mammalian cells [Communication écrite]. Gordon Conference MEMS Technology & Biomedical Applications, Connecticut, USA. Non disponible

Major, D. (2006). Modélisation et contrôle d'un procédé multi-étagé : application industrielle au blanchiment à l'hydrosulfite [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Major, D., Perrier, M., Gendron, S., Wong, D., & Lupien, B. (février 2006). Modeling and control of hydrosulphite brightening for a three-addition point process [Communication écrite]. 92nd Annual Meeting Preprints-Book B. Non disponible

Martin, E., Manceur, A., Polizu, S., Savadogo, O., Wu, M. H., & Yahia, L. (2006). Corrosion Behaviour of a Beta-Titanium Alloy. Bio-Medical Materials and Engineering, 16(3), 171-182. Lien externe

Mary, B., Dubois, C., Carreau, P., & Brousseau, P. (2006). Rheological properties of suspensions of polyethylene-coated aluminum nanoparticles. Rheologica Acta, 45(5), 561-573. Lien externe

Mc Murray-Beaulieu, V. (2006). Étude du métabolisme énergétique des cellules mammifères CHO à titre d'indicateur de croissance et de productivité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Messaoud, F. (2006). Caractérisation rhéologique des alliages de magnésium à l'état semi-solide [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Méthot, S., Lavertu, M., Ma, P. L., Winnik, F., & Buschmann, M. D. (septembre 2006). High Efficiency Gene Transfer Using Chitosan/DNA Nanoparticles With Specific Combinations of Molecular Weight and Degree of Deacetylation [Communication écrite]. Transactions 10th International Conference on Chitin and Chitosan, Montpellier, France. Non disponible

Mighri, F., & Huneault, M. A. (2006). In situ visualization of drop deformation, erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions. Journal of Applied Polymer Science, 100(4), 2582-2591. Lien externe

Mobuchon, C., Carreau, P., & Heuzey, M.-C. (avril 2023). Model Systems for the Rheological Investigation of Polymer/Clay Nanocomposite [Communication écrite]. 3rd Annual European Rheology Conference, Crete, Grèce. Non disponible

Mobuchon, C., Heuzey, M.-C., & Carreau, P. (juillet 2006). Effect of Flow History on Structure Build-Up and Breakdown of Polymer/Clay Nanocomposite Model System [Communication écrite]. 3rd Brazilian Conference on Rheology, Rio de Janeiro, Brazil. Non disponible

Mokrini, A., & Huneault, M. A. (2006). Proton Exchange Membranes Based on PVDF/SEBS Blends. Journal of Power Sources, 154(1), 51-58. Lien externe

Mokrini, A., Huneault, M. A., & Gerard, P. (2006). Partially fluorinated proton exchange membranes based on PVDF-SEBS blends compatibilized with methylmethacrylate block copolymers. Journal of Membrane Science, 283(1-2), 74-83. Lien externe

Morel, E. (2006). Développement et validation de la mesure en ligne de la fluorescence pour la surveillance et le contrôle d'un réacteur anaérobie mésophile/thermophile [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Morel, E., Tartakovsky, B., Guiot, S. R., & Perrier, M. (2006). ADM1 Application for Tuning and Performance Analysis of a Multi-Model Observer-Based Estimator. Water Science and Technology, 54(4), 93-100. Lien externe

Morel, E., Tartakovsky, B., Guiot, S. R., & Perrier, M. (2006). On-Line Estimation of Kinetic Parameters in Anaerobic Digestion Using Observer-Based Estimators and Multiwavelength Fluorometry. Water Science and Technology, 53(4-5), 77-83. Lien externe

Murray, I. (2006). Interactions et dégradation des conducteurs électriques en milieu d'incendie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Naderi, G. (2006). Thermoplastic elastomer nanocomposites based on polypropylene and ethylene propylene diene terpolymer (PP/EPDM) [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Nafisi, S., Lashkari, O., Ghomashchi, R., Ajersch, F., & Charette, A. (2006). Microstructure and Rheological Behavior of Grain Refined and Modified Semi-Solid A356 Al-Si Slurries. ACTA Materialia, 54(13), 3503-3511. Lien externe

Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (2006). Emerging biodrying technology for the drying of pulp and paper mixed sludges. Drying Technology, 24(7), 863-878. Lien externe

Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (octobre 2006). Heat and mass transfer modeling of a novel biodrying process: Lumped system approach and preliminary results [Communication écrite]. 56th CSChE annual meeting, Sherbrooke, QC. Non disponible

Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (octobre 2006). One dimensional heat and mass transfer modeling of a novel continous biodrying process: Physical modeling and preliminary results [Communication écrite]. 56th CSChE annual meeting, Sherbrooke, QC. Non disponible

Navarri, P., & Stuart, P. R. (octobre 2006). Forest bioenergy and bioproducts: A step-by-step approach to optimize the carbon chain value in the Kraft pulp and paper process [Communication écrite]. 56e Congrès Canadien de génie chimique, Sherbrooke, QC. Non disponible

Ortiz-Cordova, M., Hagedorn, A., Orccotoma, J.-A., Baril, J., Begin, B., & Paris, J. (2006). Analyse de la variabilité de la force du papier dans une usine intégrée de papier journal. Papetières du Québec, 17(2), 16-20. Non disponible

Ortiz-Cordova, M., Hagedorn, A., Orccotoma, J.-A., Baril, J., Begin, B., & Paris, J. (2006). Analysis of paper strength variability in an integrated newsprint mill. Pulp and Paper Canada, 107(10), 37-43. Non disponible

Ouzineb, K., Lord, C., Lesauze, N., Graillat, C., Tanguy, P. A., & McKenna, T. (2006). Homogenisation Devices for the Production of Miniemulsions. Chemical Engineering Science, 61(9), 2994-3000. Lien externe

Park, J. H., & Kang, Y.-B. (2006). Effect of ferrosilicon addition on the composition of inclusions in 16Cr-14Ni-Si stainless steel melts. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 37(5), 791-797. Lien externe

Patience, G. S., & Cenni, R. (septembre 2006). Formaldehyde process intensification through gas heat capacity [Communication écrite]. 19 International Symposia on Chemical Reaction Engineering, Potsdam, Germany. Non disponible

Patience, G. S., & Lorences, M. J. (2006). VPO transient oxidation kinetics. International Journal of Chemical Reactor Engineering, 4(A22), 1-16. Lien externe

Péloquin, A. (2006). Modélisation du fourneau à décuivrage continu à l'aide d'une interface avec les logiciels FACTSAGE et METSIM [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Pelton, A. (2006). Thermodynamic database development-modeling and phase diagram calculations in oxide systems. Rare Metals, 25(5), 473-480. Lien externe

Perregaard, J., & Patience, G. S. (2006). Process for catalytic selective oxidation of a hydrocarbon substrate. (Brevet no US7087801). Lien externe

Perrier, M., Morel, E., Tartakovsky, B., & Guiot, S. R. (2006). Design of a multi-model observer-based estimator for anaerobic reactor monitoring. Computers & Chemical Engineering, 31(2), 78-85. Lien externe

Pianet, G., Vidal, D., Desaulniers, E., & Bertrand, F. (octobre 2006). A new model for the consolidation of pigments in paper coating [Communication écrite]. 56th CSChE Annual Conference, Sherbrooke, Qc, Canada. Non disponible

Polizu, S., Savadogo, O., Poulin, P., & Yahia, L. (2006). Applications of Carbon Nanotubes-Based Biomaterials in Biomedical Nanotechnology. Journal of Nanoscience and Nanotechnology, 6(7), 1883-1904. Lien externe

Pone, E., Dubois, C., Guo, N., Gao, A., Dupuis, A., Lacroix, S., & Skorobogatiy, M. A. (septembre 2006). Fabrication of the hollow all-polymer Bragg fibers [Communication écrite]. 32nd European Conference on Optical Communication, Cannes, France. Lien externe

Pone, E., Dubois, C., Guo, N., Gao, Y., Dupuis, A., Boismenu, F., Lacroix, S., & Skorobogatiy, M. A. (2006). Drawing of the Hollow All-Polymer Bragg Fibers. Optics Express, 14(13), 5838-5852. Lien externe

Pone, E., Dubois, C., Guo, N., Gao, Y., Dupuis, A., Lacroix, S., & Skorobogatiy, M. A. (avril 2006). Drawing of hollow multilayered all-polymer fibers [Communication écrite]. Smart Nanotextiles. Symposium, San Francisco, CA, USA. Lien externe

Pone, E., Dubois, C., Guo, N., Lacroix, S., & Skorobogatiy, M. A. (2006). Newtonian and non-Newtonian models of the hollow all-polymer Bragg fiber drawing. Journal of Lightwave Technology, 24(12), 4991-4999. Lien externe

Povoden, E., Grundy, A. N., & Gauckler, L. J. (2006). Thermodynamic assessment of the Mn-Cr-O system for solid oxide fuel cell (SOFC) materials. Lien externe

Povoden, E., Grundy, A. N., & Gauckler, L. J. (2006). Thermodynamic Reassessment of the Cr-O System in the Framework of Solid Oxide Fuel Cell (Sofc) Research. Journal of Phase Equilibria and Diffusion, 27(4), 353-362. Lien externe

Purenne, P., Pagé, T., Béchard, V., & Guy, C. (avril 2006). Odor Monitoring at the City of Montréal Waste Water Treatment Plant [Communication écrite]. WEF/A & WMA Odors & Air Emissions, Hartford, Ct. Lien externe

Radmanesh, R. (2006). Fluidized bed biomass gasification [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Radmanesh, R., Chaouki, J., & Guy, C. (2006). Biomass Gasification in a Bubbling Fluidized Bed Reactor: Experiments and Modeling. AICHE Journal, 52(12), 4258-4272. Lien externe

Radmanesh, R., Courbariaux, Y., Chaouki, J., & Guy, C. (2006). A unified lumped approach in kinetic modeling of biomass pyrolysis. Fuel, 85(9), 1211-1220. Lien externe

Rajabian, M., & Dubois, C. (2006). Polymerization Compounding of Hdpe/Kevlar Composites. I. Morphology and Mechanical Properties. Polymer Composites, 27(2), 129-137. Lien externe

Reid, C. (2006). Analyse du cycle de vie de la gestion des résidus miniers [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Reignier, J., & Huneault, M. A. (2006). Preparation of interconnected poly (e-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching. Polymer, 47(13), 4703-4717. Lien externe

Ringuette, S., Dubois, C., Stowe, R. A., & Charlet, G. (2006). Synthesis and characterization of deuterated glycidyl azide polymer (GAP). Propellants, Explosives, Pyrotechnics, 31(2), 131-138. Lien externe

Ringuette, S., Stowe, R., Dubois, C., Charlet, G., Kwok, Q., & Jones, D. E. G. (2006). Deuterium Effect on Thermal Decomposition of Deuterated Gap: 1. Slow Thermal Analysis With a Tga-Dta-Ftir-Ms. Journal of Energetic Materials, 24(4), 307-320. Lien externe

Rivera Aparicio, C. A., Foucault, S., Heniche, M., Espinosa-Solares, T., & Tanguy, P. A. (2006). Mixing Analysis in a Coaxial Mixer. Chemical Engineering Science, 61(9), 2895-2907. Lien externe

Robelin, C., & Chartrand, P. (septembre 2006). Modeling the thermodynamic properties and density of molten salt systems : perspectives for ionic liquids [Présentation]. Dans EUCHEM Conference on Molten Salts and Ionic Liquids XXI, Hammamet, Tunisia. Non disponible

Robelin, C., Chartrand, P., & Pelton, A. (octobre 2004). A Thermodynamic Database for AlCl₃-Based Molten Salt Systems [Communication écrite]. Molten Salts XIV, Honolulu, Hawaii. Publié dans ECS Proceedings Volumes, 2004-24(1). Lien externe

Rochat, D., Margni, M., & Jolliet, O. (2006). Continent-Specific Intake Fractions and Characterization Factors for Toxic Emissions: Does It Make a Difference? International Journal of Life Cycle Assessment, 11(S1), 55-63. Lien externe

Rodriguez-Varela, F. J., & Savadogo, O. (2006). Electroactive Alcohol-Tolerant Pt-Alloys. ECS Transactions, 3(1), 181-187. Lien externe

Roughley, P., Hoemann, C. D., Desrosiers, E., Mwale, F., Antoniou, J., & Alini, M. (2006). The Potential of Chitosan-Based Gels Containing Intervertebral Disc Cells for Nucleus Pulposus Supplementation. Biomaterials, 27(3), 388-396. Lien externe

Roy, G. R., Jasmin, S., & Stuart, P. R. (août 2006). Technical Modeling of a batch Biodrying Reactor for Pulp and Paper Mill Sludge [Communication écrite]. 17th International Congress of Chemical and Process Engineering, Prague, Czech Republic. Non disponible

Roy, X., Sarazin, P., & Favis, B. D. (2006). Ultraporous nanosheath materials by layer-by-layer deposition onto co-continuous polymer-blend templates. Advanced Materials, 18(8), 1015-1019. Lien externe

Sadeghi, F. (2006). Development of microporous polypropylene by stretching [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Salazar, E., Samson, R., Munnoch, K., & Stuart, P. R. (2006). Identifying environmental improvement opportunities for newsprint production using life cycle assessment (LCA). Pulp and Paper Canada, 107(11), 32-38. Non disponible

Santoni, A. (2006). Étude des défauts de surface générés lors du moulage de mousses de thermoplastiques élastomères [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Sarazin, P., Virgilio, N., & Favis, B. D. (2006). Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks. Journal of Applied Polymer Science, 100(2), 1039-1047. Lien externe

Savadogo, O., & Tian, H. (2006). Development of New Tolerant Alcohol or Acetal Cathodes for Direct Alcohol or Acetal Fuel Cell (DAFC) Applications. ECS Meeting Abstracts, MA2006-01(32), 1076-1076. Lien externe

Savadogo, O., & Tian, H. (2006). Direct Ethanol or Methanol Fuel Cells Based on Alcohol Tolerant cathodes. ECS Meeting Abstracts, MA2006-01(33), 1130-1130. Lien externe

Savadogo, O., & Varela, F. J. R. (octobre 2005). Ethanol-tolerant oxygen reduction reaction (ORR) Cathodes for Direct Ethanol Fuel Cell Applications [Communication écrite]. Proton Exchange Membrane Fuel Cells V, Honor of Supramaniam Srinivasan 208th Electrochemical Society Meeting, Los Angeles, California. Lien externe

Savadogo, O., & Varela, F. J. R. (octobre 2005). Palladium-alloy catalysts as ethanol tolerant cathodes for direct alcohol fuel cell (DEFC) Applications [Communication écrite]. Proton Exchange Membrane Fuel Cells V, Honor of Supramaniam Srinivasan 208th Electrochemical Society Meeting, Los Angeles, California. Lien externe

Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2006). Effect of strongly repulsive particle interactions on the rheology of concentrated silica suspensions [Communication écrite]. 78th Annual Meeting of the Society of Rheology, Portland, ME, USA. Lien externe

Shanian, A., & Savadogo, O. (2006). ELECTRE I : decision support model for material selection of bipolar plates for polymer electrolyte fuel cells applications. Journal of New Materials for Electrochemical Systems, 9(3), 191-199. Non disponible

Shanian, A., & Savadogo, O. (2006). A non-compensatory compromised solution for material selection of bipolar plates for polymer electrolyte membrane fuel cell (PEMFC) using ELECTRE IV. Electrochimica Acta, 51(25), 5307-5315. Lien externe

Shanian, A., & Savadogo, O. (2006). TOPSIS Multiple-Criteria Decision Support Analysis for Material Selection of Metallic Bipolar Plates for Polymer Electrolyte Fuel Cell. Journal of Power Sources, 159(2), 1095-1104. Lien externe

Shanian, A., & Savadogo, O. (2006). Using multi-pseudocriteria and fuzzy outranking relation analysis for material selection of bipolar plates for PEFCs. Journal of The Electrochemical Society, 153(5), 887-896. Lien externe

Shekari, A., Hansen, K. M. S., Fankem, C., Tzakova, T., & Patience, G. S. (octobre 2006). Thermogravimetric analysis of VPO calcination [Communication écrite]. 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Shive, M. S., Hoemann, C. D., Restrepo, A., Hurtig, M. B., Duval, N., Ranger, P., Stannish, W., & Buschmann, M. D. (2006). BST-CarGel: In Situ ChondroInduction for Cartilage Repair. Dans Operative Techniques in Orthopaedics: Articular Cartilage Surgery (Vol. 16, p. 271-278). Lien externe

Sifi, I. (2006). Culture de cellules végétales en bioréacteur : suivi et contrôle du phosphate intracellulaire [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Smaoui, F., Buschmann, M. D., Jean, M., Bouhdoud, L., Henrichon, M., Méthot, S., & Merzouki, A. (juin 2006). The chitosan used as a delivery system of therapeutic growth factors for the induction of cartilage regeneration [Communication écrite]. Canadian Society of Microbiologists Annual Conference, London, Ontario. Non disponible

Soares, S. R., Toffoletto, L., & Deschênes, L. (2006). Development of weighting factors in the context of LCIA. Journal of Cleaner Production, 14(6-7), 649-660. Lien externe

Sosa, A., Carreau, P., Tanguy, P. A., Ascanio, G., & Guerrero, C. (2006). The effect of thickener on the rheology of coating colors. Chemical Engineering Communications, 193(8), 917-928. Lien externe

Stoeffler, K., Lafleur, P., & Denault, J. (mai 2006). Thermal properties of polyethylene nanocomposites based on different organoclays [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe

Stuart, P. R. (2006). The Forest Biorefinery: Survival Strategy for Canada's Pulp & Paper Sector? Pulp and Paper Canada, 107(6), 13-16. Non disponible

Tanguy, P. A. (octobre 2006). Complex mixing in coaxial multiple shaft stirred tanks - A review [Communication écrite]. 22nd Interamerican Congress of Chemical Engineering (CIIQ 2006) and 5th Argentinian Congress of Chemical Engineering (CAIQ 2006), Buenos Aires, Argentina. Non disponible

Tanguy, P. A., Thibault, F., Ascanio, G., & Brito-De La Fuente, E. (2006). Solid-Liquid Mixing : Numerical simulation and Physical Experiments. Dans Lee, S. (édit.), Encyclopedia of chemical processing (p. 2753-2768). Lien externe

Thibault, M. M., & Buschmann, M. D. (2006). Migration of Bone Marrow Stromal Cells in 3D : 4 Color Methodology Reveals Spatially and Temporally Coordinated Events. Cell Motility and the Cytoskeleton, 63(12), 725-740. Lien externe

Thibault, M., & Buschmann, M. D. (octobre 2006). Chemotactic response of human and rabbit bone marrow mesenchymal stem cells towards components of a hybrid biomaterial for cartilage repair [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Thomé, G. (2006). Étude de la performance du mélangeur "Maxblend" à différentes échelles [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Tian, H., & Savadogo, O. (2006). Silicotungstic acid Nafion composite membrane for proton-exchange membrane fuel cell operation at high temperature. Journal of New Materials for Electrochemical Systems, 9(1), 61-71. Non disponible

Tran-Khanh, N., Chevrier, A., & Buschmann, M. D. (mars 2006). Outgrowth of chondrocytes at the agarose-media interface depends on donor age, culture medium and interface geometry [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible

Tran-Khanh, N., Lavertu, M., Hoemann, C. D., & Buschmann, M. D. (octobre 2006). Chondrocyte proliferation at the agarose-media interface resembles appositional mechanisms of the epiphyseal growth plate [Communication écrite]. Transactions 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

Valverde-Franco, G., Binette, J. S., Li, W., Wang, H., Chai, S., Laflamme, F., Tran-Khanh, N., Quenneville, E., Meijers, T., Poole, A. R., Mort, J. S., Buschmann, M. D., & Henderson, J. E. (2006). Defects in Articular Cartilage Metabolism and Early Arthritis in Fibroblast Growth Factor Receptor 3 Deficient Mice. Human Molecular Genetics, 15(11), 1783-1792. Lien externe

Varela, F. J. R., & Savadogo, O. (2006). The effect of anode catalysts on the behavior of low temperature Direct Propane Polymer Electrolyte Fuel Cells (DPFC). Journal of New Materials for Electrochemical Systems, 9(2), 127-137. Non disponible

Varela, F. J. R., & Savadogo, O. (octobre 2006). Electroactive alcohol tolerant Pt-alloys [Communication écrite]. Proton Exchange Membrane Fuel Cells 6 - 210th Electrochemical Society Meeting, Cancun, Mexico. Lien externe

Veregina, R. P. N., Mcdougall, M. N. V., Hawkins, M. S., Vong, C., Skorokhod, V., & Schreiber, H. P. (2006). A Bidirectional Acid-Base Charging Model for Triboelectrification: Part I. Theory. Journal of Imaging Science and Technology, 50(3), 282-287. Lien externe

Veregina, R. P. N., Mcdougall, M. N. V., Hawkins, M. S., Vong, C., Skorokhod, V., & Schreiber, H. P. (2006). A Bidirectional Acid-Base Charging Model for Triboelectrification: Part II. Experimental Verification by Inverse Gas Chromatography and Charging of Metal Oxides. Journal of Imaging Science and Technology, 50(3), 288-293. Lien externe

Vidal, D., & Bertrand, F. (janvier 2006). Recent progress and challenges in the numerical modeling of coating structure development [Communication écrite]. TAPPI 9th Advanced Coating Fundamentals Symposium, Turku, Finland. Lien externe

Wising, U., & Stuart, P. R. (2006). Identifying the Canadian Forest Biorefinery. Pulp and Paper Canada, 107(6), 25-30. Non disponible

Wising, U., Algehed, J., Berntsson, T., & Delin, L. (2006). Consequences of Lignin Precipitation in the Pulp and Paper Industry. Tappi Journal, 5(1), 3-8. Lien externe

Wising, U., Berntsson, T., & Asblad, A. (2006). Energy System Consequences When Installing an Advanced Delignification Process. Canadian Journal of Chemical Engineering, 84(1), 108-115. Lien externe

Wising, U., Berntsson, T., Riemer, K., & Stuart, P. R. (2006). Strategic approach to co-generation design. Pulp and Paper Canada, 107(4), 42-46. Non disponible

Yoshida, M., Yoshida, K., Kozlov, G., Lim, N. S., De Crescenzo, G., Pang, Z., Berlanga, J. J., Kahvejian, A., Gehring, K., Wing, S. S., & Sonenberg, N. (2006). Poly(a) Binding Protein (Pabp) Homeostasis Is Mediated by the Stability of Its Inhibitor, Paip2. Embo Journal, 25(9), 1934-1944. Lien externe

Yuan, Z., & Favis, B. D. (2006). Influence of the efficacy of interfacial modification on the coarsening of cocontinuous PS/HDPE blends during quiescent annealing. Journal of polymer science. Part B, Polymer physics, 44(4), 711-721. Lien externe

Zagury, G. J., Neculita, C.-M., Bastien, C., & Deschênes, L. (2006). Mercury Fractionation, Bioavailability, and Ecotoxicity in Highly Contaminated Soils From Chlor-Alkali Plants. Environmental Toxicology and Chemistry, 25(4), 1138-1147. Lien externe

Zhang, Z., & Lafleur, P. (mai 2006). The effect of cooling air aerodynamics on bubble instability in blown film [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe

Zhang, Z., Lafleur, P., & Bertrand, F. (2006). Effect of Aerodynamics on Film Blowing Process. International Polymer Processing, 21(5), 527-535. Lien externe

Liste produite: Thu Nov 21 05:40:46 2024 EST.