 | Monter d'un niveau |
Gay, M., Wang, X., Ritzman, T., Floccari, L., Schwend, R. M., & Aubin, C.-É. (2023). Biomechanical analysis of rod contouring in posterior spinal instrumentation and fusion for 3D correction of adolescent idiopathic scoliosis. Spine Deformity, 11(6), 1309-1316. Lien externe
Wang, X., Larson, A. N., Polly, D. W. J., & Aubin, C.-É. (2023). Biomechanical Computational Study of Pedicle Screw Position and Density in Adolescent Idiopathic Scoliosis Instrumentation. Spine, 48(20), 1436-1445. Lien externe
Wang, X., Schwend, R. M., Ritzman, T., Floccari, L., & Aubin, C.-É. (2023). Concave rod first vs. convex rod first in AIS instrumentation with differential rod contouring: computer modeling and simulations based on ten AIS surgical cases. Spine Deformity, 11(6), 1317-1324. Lien externe
Cheng, Y., Fan, L., Rose, J., Huang, F., Schmall, J., Wang, X., Xie, X., Shair, J., Ramamurthy, J., Modi, N., Li, C., Wang, C., Shah, S., Pal, B. C., Miao, Z., Isaacs, A., Mahseredjian, J., & Zhou, Z. J. (2023). Real-World Subsynchronous Oscillation Events in Power Grids with High Penetrations of Inverter-Based Resources. IEEE Transactions on Power Systems, 38(1), 316-330. Lien externe
Wang, X., Aubin, C.-É., Armstrong, R., & Rawlinson, J. (2022). How do additional rods reduce loads on the primary rods in adult spinal instrumentation with pedicle subtraction osteotomy? Clinical Biomechanics, 93, 7 pages. Lien externe
Benoit, D., Wang, X., Crandall, D. G., & Aubin, C.-É. (2020). Biomechanical analysis of sagittal correction parameters for surgical instrumentation with pedicle subtraction osteotomy in adult spinal deformity. Clinical Biomechanics, 71, 45-52. Lien externe
Rastegar, S., Arnoux, P. J., Wang, X., & Aubin, C.-É. (2020). Biomechanical analysis of segmental lumbar lordosis and risk of cage subsidence with different cage heights and alternative placements in transforaminal lumbar interbody fusion. Computer Methods in Biomechanics and Biomedical Engineering, 23(9), 456-466. Lien externe
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (2020). A novel scoliosis instrumentation using special superelastic nickel-titanium shape memory rods: a biomechanical analysis using a calibrated computer model and data from a clinical trial. Spine Deformity, 8(3), 369-379. Lien externe
Fradet, L., Wang, X., Crandall, D., & Aubin, C.-É. (2018). Biomechanical Analysis of Acute Proximal Junctional Failure After Surgical Instrumentation of Adult Spinal Deformity: The Impact of Proximal Implant Type, Osteotomy Procedures, and Lumbar Lordosis Restoration. Spine Deformity, 6(5), 483-491. Lien externe
Delikaris, A., Wang, X., Boyer, L., Larson, A. N., Ledonio, C. G. T., & Aubin, C.-É. (2018). Implant density at the apex is more important than overall implant density for 3D correction in thoracic adolescent idiopathic scoliosis using rod derotation and en bloc vertebral derotation technique. Spine, 43(11), E639-E647. Lien externe
Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T., & Aubin, C.-É. (2017). Biomechanical effect of pedicle screw distribution in AIS instrumentation using a segmental translation technique: computer modeling and simulation. Scoliosis and Spinal Disorders, 12(1). Disponible
Wang, X., Aubin, C.-É., Coleman, J., & Rawlinson, J. (2017). Correction capability in the 3 anatomic planes of different pedicle screw designs in scoliosis instrumentation. Clinical Spine Surgery, 30(4), E323-E330. Lien externe
Salvi, G., Aubin, C.-É., Le Naveaux, F., Wang, X., & Parent, S. (2016). Biomechanical analysis of Ponte and pedicle subtraction osteotomies for the surgical correction of kyphotic deformities. European Spine Journal, 25(8), 2452-2460. Lien externe
Fradet, L., Wang, X., Lenke, L. G., & Aubin, C.-É. (2016). Biomechanical analysis of proximal junctional failure following adult spinal instrumentation using a comprehensive hybrid modeling approach. Clinical Biomechanics, 39, 122-128. Lien externe
Wang, X., Boyer, L., Le Naveaux, F., Schwend, R. M., & Aubin, C.-É. (2016). How does differential rod contouring contribute to 3-dimensional correction and affect the bone-screw forces in adolescent idiopathic scoliosis instrumentation? Clinical Biomechanics, 39, 115-121. Lien externe
Le Navéaux, F., Larson, A. N., Labelle, H., Wang, X., & Aubin, C.-É. (2016). How does implant distribution affect 3D correction and bone-screw forces in thoracic adolescent idiopathic scoliosis spinal instrumentation? Clinical Biomechanics, 39, 25-31. Lien externe
Wang, X., Boyer, L., LeNaveaux, F., Labelle, H., Parent, S., & Aubin, C.-É. (2015). Interdependency between corrections in the three anatomic planes in AIS instrumentation. Scoliosis and Spinal Disorders, 10(S1), O22 (1 page). Disponible
Desrochers-Perrault, F., Aubin, C.-É., Wang, X., & Schwend, R. M. (2014). Biomechanical analysis of Iliac screw fixation in spinal deformity instrumentation. Clinical Biomechanics, 29(6), 614-621. Lien externe
Cammarata, M., Aubin, C.-É., Wang, X., & Mac-Thiong, J.-M. (2014). Biomechanical risk factors for proximal junctional kyphosis : a detailed numerical analysis of surgical instrumentation. Spine, 39(8), E500-507. Lien externe
Martino, J., Aubin, C.-É., Labelle, H., Wang, X., & Parent, S. (2013). Biomechanical Analysis of Vertebral Derotation Techniques for the Surgical Correction of Thoracic Scoliosis. Spine, 38(2), E73-E83. Lien externe
De Leon, F., Czarkowski, D., Spitsa, V., Martinez, J. A., Noda, T., Iravani, R., Wang, X., Davoudi, A., Chang, G. W., Mehrizi-Sani, A., & Kocar, I. (2013). Development of data translators for interfacing power-flow programs with EMTP-type programs: Challenges and lessons learned. IEEE Transactions on Power Delivery, 28(2), 1192-1201. Lien externe
Sevrain, A., Aubin, C.-É., Gharbi, H., Wang, X., & Labelle, H. (2012). Biomechanical evaluation of predictive parameters of progression in adolescent isthmic spondylolisthesis: a computer modeling and simulation study. Scoliosis and Spinal Disorders, 7(1), 2 (9 pages). Disponible
Wang, X., Aubin, C.-É., Crandall, D., Parent, S., & Labelle, H. (2012). Biomechanical Analysis of 4 Types of Pedicle Screws for Scoliotic Spine Instrumentation. Spine, 37(14), E823-E835. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., Parent, S., & Crandall, D. (2012). Biomechanical Analysis of Corrective Forces in Spinal Instrumentation for Scoliosis Treatment. Spine, 37(24), E1479-E1487. Lien externe
Wang, X., Aubin, C.-É., Robitaille, I., & Labelle, H. (2012). Biomechanical Comparison of Alternative Densities of Pedicle Screws for the Treatment of Adolescent Idiopathic Scoliosis. European Spine Journal, 21(6), 1082-1090. Lien externe
Majdouline, Y., Aubin, C.-É., Wang, X., Sangole, A., & Labelle, H. (2012). Preoperative assessment and evaluation of instrumentation strategies for the treatment of adolescent idiopathic scoliosis: computer simulation and optimization. Scoliosis and Spinal Disorders, 7(1). Disponible
Wang, X., Aubin, C.-É., Crandall, D., & Labelle, H. (2011). Biomechanical comparison of force levels in spinal instrumentation using monoaxial versus multi degree of freedom post-loading pedicle screws. Spine, 36(2), E95-E104. Lien externe
Wang, X., Aubin, C.-É., Crandall, D., & Labelle, H. (2011). Biomechanical modeling and analysis of a direct incremental segmental translation system for the instrumentation of scoliotic deformities. Clinical Biomechanics, 26(6), 548-555. Lien externe
Akrout, K., Baron, L., & Wang, X. (2009). Manipulateur sériel 6R sphérique isotrope pour toute orientation de l'effecteur. Transactions of the Canadian Society for Mechanical Engineering, 33(4), 679-688. Lien externe
Wang, X., Baron, L., & Cloutier, G. (2008). Topological and Geometrical Synthesis of Three-Degree-of-Freedom Fully Parallel Manipulators by Instantaneous Kinematics. Journal of Mechanical Design, 130(3), 032301 (8 pages). Lien externe
Wang, X., Baron, L., & Cloutier, G. (2008). Topology of Serial and Parallel Manipulators and Topological Diagrams. Mechanism and Machine Theory, 43(6), 754-770. Lien externe
Wang, X., Aubin, C.-É., Ritzman, T., McBride, L., Rawlinson, J., & Diaz, C. (2019). Differential Rod Contouring Simulation. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Cross-link Torsional Stability for Posterior Fixation in Spinal Fusion Surgery – Phase 1. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Dual Construct in Adult Spinal Instrumentation Phase 1 – Biomechanical Analysis. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Multi-rod Constructs Biomechanical Analysis Phase 1: Characterization of Load Sharing. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Multi-rod Constructs Biomechanical Analysis Phase 2: Characterization of Load Sharing in Adult Instrumentation Involving PSO. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2017). 3-D Correction of Adolescent Idiopathic Scoliosis: A Biomechanical Simulation of Spinal Instrumentation Using APEX and Standard Spinal Rods. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2017). APEX Rod Correction Project –Phase 1. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2015). Biomechanical Modeling and Simulations of Scoliosis Instrumentation using Tether Connectors (Tether Connector Simulation Project – Phase 1). (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2015). Biomechanical Modeling and Simulations of Scoliosis Instrumentation using Tether Connectors (Tether Connector Simulation Project – Phase 1b). (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., Coleman, J., & Rawlinson, J. (2012). Biomechanical Performance of Sagittal Adjusting Screws (SAS) - Phase 1. (Rapport technique). Non disponible
Aubin, C.-É., Wang, X., Crandall, D., & Labelle, H. (2011). Biomechanical Comparison of Pedicle Screw Instrumentation Systems for 3D Correction of Adolescent Idiopathic Scoliosis. (Rapport technique n° MD006498-1.0/1111). Non disponible
Wang, X., Aubin, C.-É., & Coleman, J. (2009). Multi Planar Adjusting (MPA) pedicle screw biomechanical analysis. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., Armstrong, R., & Rawlinson, J. (octobre 2019). Biomechanical effects of additional rods in spinal instrumentation with pedicle subtraction osteotomy [Communication écrite]. 49e Réunion annuelle de la Société de scoliose du Québec, Québec City, Québec, Canada. Non disponible
Wang, X., Zou, L., Deck-Leger, Z.-L., Caloz, C., & Azana, J. (juillet 2018). Coupled Loop Resonator Hilbert Transformer [Communication écrite]. USNC-URSI Radio Science Meeting (USNC-URSI 2018), Boston, MA, United states. Lien externe
Aubin, C.-É., Armstrong, R., Rawlinson, J., & Wang, X. (juin 2019). How do additional rods reduce loading of the primary rods in adult spinal instrumentation with pedicle subtraction osteotomy? [Communication écrite]. 2nd International Combined Meeting of Orthopaedic Research Societies (ICORS) and the Canadian Orthopaedic Association and Canadian Orthopaedic Research Society, Montréal, Québec, Canada. Non disponible
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (juillet 2019). A Novel Superelastic Shape-Memory Rod Provides More Options for Optimal AIS Correction: Biomechanical Analysis of A Clinical Trial with 5-Year Follow-Up [Communication écrite]. 26th International Meeting on Advanced Spine Techniques (IMAST 2019), Amsterdam, The Netherlands. Non disponible
La Barbera, L., Larson, A. N., Wang, X., & Aubin, C.-É. (mai 2019). Screw density and pattern have limited impact on the 3D correction of Lenke 1A curves [Communication écrite]. 34eme Congrès de la Recherche des étudiants des cycles supérieurs et des postdoctorants au Centre de recherche du Centre hospitalier universitaire Sainte-Justine, Montréal, Québec, Canada. Non disponible
La Barbera, L., Larson, A. N., Wang, X., & Aubin, C.-É. (avril 2018). Screw density has lower impact than correction objectives on 3D correction of Lenke 1A curves [Communication écrite]. 39e journée de la recherche du Programme d'orthopédie Édouward-Samson (POES) et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec, Canada. Non disponible
Lopez Poncelas, M., Aubin, C.-É., Wang, X., & Crandall, D. G. (novembre 2018). Biomechanical Analysis of Proximal Junctional Failure for Different Proximal Fixations of the Spine [Communication écrite]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Non disponible
Benoit, D., Aubin, C.-É., Wang, X., & Crandall, D. G. (novembre 2018). Biomechanical analysis of surgical instrumentation for adult sagittal imbalance with pedicle subtraction osteotomy [Communication écrite]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Non disponible
Wang, X., Yeung, K., Cheung, J. P. Y., Yiu-Nam Lau, J., Qi, W., Man-Chee Cheung, K., & Aubin, C.-É. (novembre 2018). A novel scoliosis instrumentation using superelastic nickel-titanium shape memory alloy rods : a biomechanical analysis [Communication écrite]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Non disponible
Wang, X., Larson, A. N., Labelle, H., Parent, S., Ledonio, C. G. T., Polly, D. W., & Aubin, C.-É. (octobre 2017). Biomechanical comparison of different pedicle screw patterns in adolescent idiopathic scoliosis instrumentation [Communication écrite]. 47e Réunion annuelle de la Société de scoliose du Québec, Baie St-Paul, QC. Non disponible
Wang, X., Crandall, D. G., Parent, S., Larson, N., Labelle, H., & Aubin, C.-É. (mai 2016). Biomechanical effect of pedicle screw distribution in AIS instrumentation using segmental translation technique: Preliminary results [Communication écrite]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta (43 pages). Publié dans Scoliosis and Spinal Disorders, 12(S1). Disponible
Wang, X., Larson, A. N., Labelle, H., Parent, S., Ledonio, C. G. T., Polly, D. W., & Aubin, C.-É. (septembre 2017). Optimization of implant density in AIS instrumentation using a computerized spine simulator [Communication écrite]. 52nd Annual Meeting & Course - Scoliosis Research Society, Philadelphia, PA. Non disponible
Duceppe, N., Wang, X., & Aubin, C.-É. (octobre 2016). 3D biomechanical evaluation of different implant configurations in scoliosis instrumentation with apical vertebral derotation [Communication écrite]. 46e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T., & Aubin, C.-É. (octobre 2016). Does variation in pedicle screw pattern affect deformity correction and bone-screw forces in adolescent idiopathic scoliosis instrumentation using polyaxial screws with dorsal height adjustability? [Communication écrite]. 46e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Wang, X., Boyer, L., Le Naveaux, F., Schwend, R. M., & Aubin, C.-É. (octobre 2015). Biomechanical analysis of differential rod contouring for 3D correction in AIS instrumentation [Communication écrite]. 45e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Koumayha, I., Aubin, C.-É., & Wang, X. (octobre 2015). Biomechanical analysis of fusionless instrumentations of early onset scoliosis using two spinal growth-guiding systems [Communication écrite]. 45e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Fradet, L., Wang, X., Lenke, L., & Aubin, C.-É. (octobre 2015). Biomechanical analysis of proximal junctional failure following spinal instrumentation: finite element modeling and simulations of a first adult scoliosis case [Communication écrite]. 45e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Benoit, D., Aubin, C.-É., Le Navéaux, F., & Wang, X. (octobre 2015). Evaluation of postoperative loads in the instrumented spine with Ponte and pedicle subtraction osteotomies for the correction of kyphotic deformities [Communication écrite]. 45e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Wang, X., Boyer, L., Le Naveaux, F., & Schwend, R. M. (juillet 2015). How much differential rod contouring is necessary to biomechanically contribute to the transverse plane correction in AIS instrumentation? [Communication écrite]. 22nd International Meeting on Advanced Spine Techniques (IMAST 2015), Kuala Lumpur, Malaysia. Lien externe
Aubin, C.-É., Cammarata, M., Wang, X., & Mac-Thiong, J.-M. (juillet 2014). Instrumentation strategies to reduce the risks of proximal junctional kyphosis in adult scoliosis : a detailed biomechanical analysis [Communication écrite]. 21st International Meeting on Advanced Spine Techniques (IMAST 2014), Valencia, Spain. Publié dans Spine Deformity, 3(3). Lien externe
Boyer, L., Wang, X., Parent, S., & Aubin, C.-É. (octobre 2014). Analyse biomécanique de techniques chirurgicales de dérotation "en bloc" pour la correction 3D de la scoliose [Biomechanical analysis of surgical "en bloc" derotation techniques for 3D correction of scoliosis]. [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Desrochers-Perreault, F., Aubin, C.-É., Wang, X., & Schwend, R. M. (octobre 2013). Analyse biomécanique d'instrumentation du rachis scoliotique avec vis iliaques [Communication écrite]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Non disponible
Cammarata, M., Aubin, C.-É., Wang, X., & Mac-Thiong, J.-M. (octobre 2013). Facteurs biomécaniques de risque de la cyphose jonctionnelle proximale : une analyse numérique détaillée des variables d'instrumentation chirurgicale [Communication écrite]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Non disponible
Perrault, F. D., Wang, X., Schwend, R. M., & Aubin, C.-É. (mai 2012). Analyse biomécanique d'instrumentations étendues du rachis scoliotique avec vis iliaques: Résultats préliminaires [Communication écrite]. 27e Congrès de recherche des étudiants gradués du Centre de Recherche du CHU Sainte-Justine, Montréal, Québec, Canada. Non disponible
Cammarata, M., Wang, X., & Mac-Thiong, J.-M. (octobre 2012). Analyse biomécanique de la cyphose jonctionnelle proximale [Communication écrite]. 42e Réunion annuelle de la Société de scoliose du Québec, Sherbrooke, QC. Non disponible
Perreault, F. D., Aubin, C.-É., Wang, X., & Schwend, R. M. (octobre 2012). Analyse biomécanique de montage avec vis iliaques dans le traitement de longues déformations: résultats préliminaires [Communication écrite]. 42e Réunion annuelle de la Société de scoliose du Québec, Sherbrooke, QC. Non disponible
Cammarata, M., Wang, X., Mac-Thiong, J. M., & Aubin, C.-É. (mai 2012). Analyse des facteurs biomécaniques impliqués dans la cyphose jonctionnelle proximale [Communication écrite]. 32e journée de la recherche du Programme d'orthopédie Édouward-Samson (POES) et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec, Canada. Non disponible
Perrault, F. D., Aubin, C.-É., Wang, X., & Schwend, R. M. (juillet 2012). Biomechanical Analysis of Forces Sustained by Iliac Screws in Spinal Instrumentation for Deformity Treatment: Preliminary Results. [Communication écrite]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. Lien externe
Wang, X., Aubin, C.-É., Larson, A. N., Labelle, H., & Parent, S. (juillet 2012). Biomechanical Analysis of Pedicle Screw Density in Spinal Instrumentation for Scoliosis Treatment: First Results. [Communication écrite]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. Lien externe
Cammarata, M., Wang, X., Mac-Thiong, J.-M., & Aubin, C.-É. (juillet 2012). Biomechanical Analysis of Proximal Junctional Kyphosis: Preliminary Results. [Communication écrite]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Parent, S. (octobre 2011). Analysis of corrective forces for spinal instrumentation using three types of pedicle screws [Communication écrite]. EuroSpine 2011, Milan, Italy. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Stefan, P. (juillet 2011). Biomechanical Effectiveness of Three Types of Pedicle Screws for the Spinal Instrumentation of Adolescent Idiopathic Scoliosis [Communication écrite]. 18th International Meeting on Advanced Spine Techniques (IMAST 2011), Copenhagen, Denmark. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Parent, S. (octobre 2011). Biomechanical study of screw forces in spinal instrumentation for scoliosis treatment [Communication écrite]. 41e Réunion annuelle de la Société de scoliose du Québec, Québec, QC. Non disponible
Wang, X., Aubin, C.-É., Robitaille, I., & Labelle, H. (octobre 2010). Biomechanical comparison of different screw densities for the instrumentation of the scoliotic spine [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juillet 2010). Biomechanical comparison of force levels in spinal instrumentation using monoaxial vs. multi-degree of freedom post-loading pedicle screws [Communication écrite]. 17th International Meeting on Advanced Spine Techniques (IMAST 2010), Toronto, Ont.. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juin 2010). Biomechanical modeling of nonstructural spinal curves for scoliosis instrumentation simulation [Communication écrite]. 8th International Research Society for Spinal Deformities Meeting (IRSSD 2010), Montréal, Québec. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juillet 2009). Biomechanical comparison of two instrumentation techniques: rod derotation vs. direct incremental segmental translation [Communication écrite]. 16th International Meeting on Advanced Spine Techniques (IMAST 2009), Vienna, Austria. Lien externe
Akrout, K., Baron, L., & Wang, X. (mai 2009). Manipulateur sériel 6R sphérique isotrope pour toute orientation de l'effecteur [Isotropic Spherical 6R Serial Manipulator for Any Orientation of its End-Effector]. [Communication écrite]. Canadian Committee for the Theory of Machines and Mechanisms Symposium (CCToMM M3), Québec, QC (11 pages). Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (novembre 2009). Rod derotation vs. direct incremental segmental translation: a biomechanical analysis [Communication écrite]. 24th Annual Meeting of the North American Spine Society (NASS 2009), San Francisco, Calif.. Non disponible
Wang, X., & Baron, L. (mai 2009). Topological synthesis of translational parallel manipulators [Communication écrite]. Canadian Committee for the Theory of Machines and Mechanisms Symposium (CCToMM M3), Québec, Québec. Publié dans Transactions of the Canadian Society for Mechanical Engineering, 33(4). Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juillet 2008). Biomechanical modelling of a direct vertebral translation instrumentation system: Preliminary results [Communication écrite]. 7th International Research Society of Spinal Deformities Meeting (IRSSD 2008), Liverpool, England. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (janvier 2008). Modélisation biomécanique du système d'instrumentation rachidienne TSRH-3D [Communication écrite]. 23e Congrès annuel de la recherche des étudiants gradués et post-gradués, Montréal, Québec. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (novembre 2008). Modélisation et analyse biomécanique de deux systèmes d'instrumentation rachidienne [Communication écrite]. 38e Réunion annuelle de la Société de scoliose du Québec, Québec, QC. Non disponible
Akrout, K., Baron, L., & Wang, X. (juin 2007). Existence d'une infinité non dénombrable de position isotropes pour les manipulateurs séries 5R sphérique [Communication écrite]. 12th World Congress in Mechanisms and Machine Science, Besancon, France. Non disponible
Bracher, S., Baron, L., & Wang, X. (juin 2007). Rotating table with parallel kinematic featuring a planar joint [Communication écrite]. 12th World Congress in Mechanisms and Machine Science, Besancon, France. Non disponible
Wang, X., Baron, L., & Cloutier, G. The Design of Parallel Manipulators of Delta Topology Under Isotropic Constraints [Communication écrite]. 11th World Congress in Mechanism and Machine Science. Non disponible
Wang, X., Baron, L., & Cloutier, G. (mai 2003). Design manifold of translational parallel manipulators [Communication écrite]. CCToMM Symposium on Mechanisms, Machines and Mechatronics, Montréal, Québec. Lien externe
Wang, X., Baron, L., & Cloutier, G. (juin 2003). Kinematic modelling and isotropic conditions of a family of translational parallel manipulators [Communication écrite]. 4th International Conference on Control and Automation (ICCA 2003), Montréal, Québec. Lien externe
Wang, X., Baron, L., & Cloutier, G. (janvier 2003). Synthèse des manipulateurs parallèles [Communication écrite]. 3e Journée d'étude interinstitutionnelle de fabrication haute performance, Bécancour, QC. Non disponible
Baron, L., Wang, X., & Cloutier, G. (janvier 2002). Isotropic conditions of parallel manipulators of delta topology [Communication écrite]. Advances in Robot Kinematics: Theory and Applications, Clades de Malavella, Espagne. Lien externe
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (juin 2018). A novel scoliosis instrumentation using special superelastic nickel-titanium shape memory alloy spinal rods can result in equivalent correction as conventional rods but with less stress at bone-implant interface: a biomechanical evaluation through simulations [Résumé]. International Research Society of Spinal Deformities (IRSSD) 2018 Meeting, Utrecht, Netherlands. Publié dans Scoliosis and Spinal Disorders, 13(8). Lien externe
Wang, X. (2006). Synthèse topologique et géométrique des manipulateurs parallèles en translation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aubin, C.-É., & Wang, X. (2019). Biomechanics of Sagittal Balance – Modeling of the Spine. Dans Roussouly, P., Pinheiro-Franco, J. L., Labelle, H., & Gehrchen, M. (édit.), Sagittal Balance of the Spine – From Normal to Pathology: A Key for Treatment Strategy . Lien externe
Wang, X., & Baron, L. (2008). Topology and geometry of serial and parallel manipulators. Dans Ryu, J.-H. (édit.), Parallel manipulators, new developments (57-74). Lien externe
