Documents dont l'auteur est "Guibault, François"

Monter d'un niveau

François GuibaultDépartement de génie informatique et génie logiciel

Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Nombre de documents: 153

Alsheghri, A., Zhang, Y., Hosseinimanesh, G., Keren, J., Cheriet, F., & Guibault, F. (2024). Robust Segmentation of Partial and Imperfect Dental Arches. Applied Sciences, 14(23), 10784 (20 pages). Lien externe

Alsheghri, A., Ladini, Y., Hosseinimanesh, G., Cheriet, F., Chafi, I., Guibault, F., & Kerem, J. (2024). Adaptive point learning with uncertainty quantification to generate margin lines on prepared teeth. Applied Sciences, 14(20), 9486 (21 pages). Disponible

Chafi, I., Cheriet, F., Keren, J., Zhang, Y., & Guibault, F. (février 2024). 3D generation of dental crown bottoms using context learning [Présentation]. Dans SPIE Medical Imaging, 2024, San Diego, California, United States. Lien externe

Desrosiers, C., Letenneur, M., Bernier, F., Piché, N., Provencher, B., Cheriet, F., Guibault, F., & Brailovski, V. (2024). Automated porosity segmentation in laser powder bed fusion part using computed tomography: a validity study. Journal of Intelligent Manufacturing, 21 pages. Lien externe

Khani, M., Débanné, P., Guibault, F., Labelle, H., Parent, S., & Cheriet, F. (2024). Automatic assessment of scoliosis surgery outcome on trunk shape using left–right trunk asymmetry. European Spine Journal, 9 pages. Lien externe

Hernandez, D., Pasquier, P., & Guibault, F. (juillet 2023). Numerical Modelling of a Sedimentation Tank for Enhancing Sediment Removal in Open-Loop Ground Source Heat Pump System of Type Standing Column Well [Communication écrite]. 22nd World Renewable Energy Congress (WREC 2023), Kuala Lumpur, Malaysia. Lien externe

Hosseinimanesh, G., Ghadiri, F., Guibault, F., Cheriet, F., & Keren, J. (octobre 2023). From Mesh Completion to AI Designed Crown [Communication écrite]. 26th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI 2023), Vancouver, BC, Canada. Lien externe

Hosseinimanesh, G., Ghadiri, F., Alsheghri, A., Zhang, Y., Keren, J., Cheriet, F., & Guibault, F. (février 2023). Improving the quality of dental crown using a transformer-based method [Communication écrite]. Medical Imaging 2023 : Physics of Medical Imaging,, San Diego, CA, USA (8 pages). Lien externe

Hernandez, D., Pasquier, P., & Guibault, F. (avril 2023). Numerical simulation of a sedimentation tank applied to an open loop groud heat exchanger system [Communication écrite]. EGU General Assembly, Vienna, Austria. Lien externe

Desrosiers, C., Letenneur, M., Bernier, F., Cheriet, F., Brailovski, V., Piché, N., & Guibault, F. (février 2022). Correlative laser confocal microscopy study and multimmodal 2D/3D registration as ground truth for x-ray inspection of internal defects in LPBF manufacturing [Communication écrite]. 11th Conference on Industrial Computed Tomography (ICT 2022), Wels, Austria. Lien externe

Lessard, O., Guibault, F., Keren, J., & Cheriet, F. (mars 2022). Dental Restoration using a Multi-Resolution Deep Learning Approach [Communication écrite]. 2022 IEEE 19th International Symposium on Biomedical Imaging (ISBI 2022), Kolkata, India (4 pages). Lien externe

Alsheghri, A., Ghadiri, F., Zhang, Y., Lessard, O., Keren, J., Cheriet, F., & Guibault, F. (février 2022). Semi-supervised segmentation of tooth from 3D scanned dental arches [Affiche]. SPIE Medical Imaging 2022 : Image processing, San Diego, California, USA (6 pages). Lien externe

Seifollahi Moghadam, Z., Guibault, F., & Garon, A. (2021). On the evaluation of mesh resolution for large-eddy simulation of internal flows using openfoam. Fluids, 6(1), 24 (17 pages). Disponible

Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2020). Moving meshes in complex configurations using the composite sliding grid method. Computers & Fluids, 206, 104256 (16 pages). Lien externe

Plastre, L., Devals, C., Gauthier, M., Nennemann, B., Trépanier, J.-Y., & Guibault, F. (octobre 2019). Cavitation erosion prediction based on a multi-scale method [Communication écrite]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). Lien externe

Devals, C., Murry, N., Mullins, B. F., Dompierre, J., Mangani, L., & Guibault, F. (septembre 2018). CFD-based casing and distributor hydraulic design optimization [Communication écrite]. 29th IAHR Symposium on Hydraulic Machinery and Systems, UK (10 pages). Lien externe

Zagre, G. É. P., Marcotte, D., Gamache, M., & Guibault, F. (2019). New Tabu Algorithm for Positioning Mining Drillholes with Blocks Uncertainty. Natural Resources Research, 28(3), 609-629. Lien externe

Doulcet, B., Devals, C., Nennemann, B., Gauthier, M., Guibault, F., & Trépanier, J.-Y. (octobre 2019). Two-way strongly coupled fluid-structure interaction simulations with OpenFOAM [Communication écrite]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). Lien externe

Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification, Part I: Convergence rate loss diagnosis. Mathematics and Computers in Simulation, 147, 152-171. Lien externe

Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification. Part II: Boundary condition non-orthogonal correction. Mathematics and Computers in Simulation, 147, 172-193. Lien externe

Mortazavinia, Z., Camarero, R., & Guibault, F. (2018). Three-dimensional Analysis of Two-way Fluid-structure Interaction on a Flexible Hydrofoil in Viscous Flow. International Journal of Fluid Machinery and Systems, 11(3), 333-343. Lien externe

Bahrami, S., Khelghatibana, M., Tribes, C., Yi Lo, S., von Fellenberg, S., Trépanier, J.-Y., & Guibault, F. (2017). Application of a territorial-based filtering algorithm in turbomachinery blade design optimization. Engineering Optimization, 49(2), 216-234. Lien externe

Mohebpour, M. R., Guibault, F., & Cheriet, F. (juillet 2017). Mesh-based active model initialization for multiple organ segmentation in MR images [Communication écrite]. 14th International Conference on Image Analysis and Recognition (ICIAR 2017), Montréal, Québec. Lien externe

Dompierre, J., Mokwinski, Y., Vallet, M.-G., & Guibault, F. (2017). On ellipse intersection and union with application to anisotropic mesh adaptation. Engineering with Computers, 33(4), 745-766. Lien externe

Laug, P., Guibault, F., & Borouchakic, H. (2017). Parallel meshing of surfaces represented by collections of connected regions. Advances in Engineering Software, 103, 13-20. Lien externe

Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2017). Unstructured grid smoothing for turbomachinery applications. International Journal of Fluid Machinery and Systems, 10(4), 421-431. Lien externe

Amiri, S., Devals, C., Dompierre, J., Camarero, R., & Guibault, F. (juillet 2017). Von Karman vortex shedding study with foam-extend-4.0 [Communication écrite]. 12th Open Foam Workshop, Exeter, UK (30 pages). Lien externe

Devals, C., Vu, T. C., Zhang, Y., Dompierre, J., & Guibault, F. (juillet 2016). Mesh convergence study for hydraulic turbine draft-tube [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Lien externe

Bahrami, S., Tribes, C., Devals, C., Vu, T. C., & Guibault, F. (2016). Multi-fidelity shape optimization of hydraulic turbine runner blades using a multi-objective mesh adaptive direct search algorithm. Applied Mathematical Modelling, 40(2), 1650-1668. Lien externe

Piche, N., Cheriet, F., & Guibault, F. (septembre 2016). A new topological descriptor for contextual feature indexing [Communication écrite]. IEEE International Conference on Image Processing (ICIP 2016), Phoenix, AZ. Lien externe

Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016). A numerical study of Francis turbine operation at no-load condition. Journal of Fluids Engineering, 139(1), 60 pages. Lien externe

Romain, C., Guibault, F., Devals, C., & Nennemann, B. (juillet 2016). Numerical study of rotor-stator interactions in a hydraulic turbine with Foam-extend [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Lien externe

Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (juillet 2016). Unsteady simulation for Francis Turbine during load rejection events [Communication écrite]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2016), Washington, DC, United states (10 pages). Lien externe

Laug, P., Guibault, F., & Borouchaki, H. (mars 2015). Automatic mesh generation of multiface models on multicore processors [Communication écrite]. 4th International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, Dubrovnik, Croatia. Lien externe

Arabi, S., Camarero, R., & Guibault, F. (2015). Comparison of mapping operators for unstructured meshes. Engineering with Computers, 31(3), 579-595. Lien externe

Tran, T. D., Nennemann, B., Vu, T. C., & Guibault, F. (2015). Investigation of cavitation models for steady and unsteady cavitating flow simulation. International Journal of Fluid Machinery and Systems, 8(4), 240-253. Lien externe

Galvan, S., Reggio, M., & Guibault, F. (2015). Numerical optimization of the inlet velocity profile ingested by the conical draft tube of a hydraulic turbine. Journal of Fluids Engineering, Transactions of the ASME, 137(7). Lien externe

Courchesne, O., Guibault, F., Parent, S., & Cheriet, F. (2015). Patient-specific anisotropic model of human trunk based on MR data. International Journal for Numerical Methods in Biomedical Engineering, 31(7). Lien externe

Bahrami, S., Tribes, C., Fellenberg, S. , Vu, T. C., & Guibault, F. (2015). Physics-based Surrogate Optimization of Francis Turbine Runner Blades, Using Mesh Adaptive Direct Search and Evolutionary Algorithms. International Journal of Fluid Machinery and Systems, 8(3), 209-219. Lien externe

Galvan, S., Reggio, M., Guibault, F., & Solorio, G. (2015). Quantitative and qualitative analysis of the flow field development through T99 draft tube caused by optimized inlet velocity profiles. International Journal of Fluid Machinery and Systems, 8(4), 283-293. Lien externe

Demers, É., Tribes, C., & Guibault, F. (2015). A selective eraser of curvature extrema for B-spline curves. Computers and Graphics (Pergamon), 51, 35-42. Lien externe

Mulu, B. G., Cervantes, M. J., Devals, C., Vu, T. C., & Guibault, F. (2015). Simulation-based investigation of unsteady flow in near-hub region of a Kaplan turbine with experimental comparison. Engineering Applications of Computational Fluid Mechanics, 9(1), 139-156. Disponible

Vallet, M.-G., Marcotte, D., & Guibault, F. (mai 2015). A spatial uncertainty index on subsurface models for drill hole planning [Communication écrite]. 37th International Symposium on Application of Computers and Operations Research in the Mineral Industry (APCOM 2015), Fairbanks, AK, United states. Non disponible

Demers, É., Guibault, F., & Tribes, C. (juin 2014). Symbolic computation of equi-affine evolute for plane B-spline curves [Communication écrite]. 8th International Conference on Curves and Surfaces, Paris, France. Lien externe

Devals, C., Zhang, Y., Dompierre, J., Vu, T. C., Mangani, L., & Guibault, F. (2014). 3D Casing-Distributor Analysis for Hydraulic Design Application. International Journal of Fluid Machinery and Systems, 8(3), 142-154. Lien externe

Devals, C., Zhang, Y., Dompierre, J., Vu, T. C., Mangani, L., & Guibault, F. (septembre 2014). 3D casing-distributor analysis with a novel block coupled OpenFOAM solver for hydraulic design application [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (11 pages). Lien externe

Galván, S., Reggio, M., & Guibault, F. (2014). Assessment Study of K-ɛ Turbulence Models and Near-Wall Modeling for Steady State Swirling Flow Analysis in Draft Tube UsingFluent. Engineering Applications of Computational Fluid Mechanics, 5(4), 459-478. Lien externe

Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (septembre 2014). Comparison of two mesh smoothing techniques for unstructured grids [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (10 pages). Lien externe

Dubé, D., Bertrand, F., Guibault, F., & Chaouki, J. (juin 2014). Efficient Parallelization of the Radioactive Particle Tracking Technique on GPU [Communication écrite]. High-Performance Computing Symposium (HPCS), Halifax, Nouvelle-Écosse, Canada. Non disponible

Bilal, N., Galinier, P., & Guibault, F. (2014). An iterated-tabu-search heuristic for a variant of the partial set covering problem. Journal of Heuristics, 20(2), 143-164. Lien externe

Bahrami, S., Tribes, C., Von Fellenberg, S., Vu, T. C., & Guibault, F. (septembre 2014). Multi-fidelity design optimization of Francis turbine runner blades [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014, Montréal, QC, Canada. Publié dans IOP Conference Series: Earth and Environmental Science, 22. Lien externe

Galvan, S., Reggio, M., Guibault, F., & Castro, L. (septembre 2014). Numerical analysis of the turbine 99 draft tube flow field provoked by redesigned inlet velocity profiles [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (11 pages). Lien externe

Tran, T. D., Nennemann, B., Vu, T. C., & Guibault, F. (août 2014). Numerical simulation of cavitating flow around a hydrofoil [Communication écrite]. 4th ASME Joint US-European Fluids Engineering Division Summer Meeting (FEDSM 2014), collocated with 12th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Chicago, IL, United states. Lien externe

Hosseinimanesh, H., Vu, T. C., Devals, C., Nennemann, B., & Guibault, F. (septembre 2014). A steady-state simulation methodology for predicting runaway speed in Francis turbines [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014, Montréal, QC, Canada. Publié dans IOP Conference Series: Earth and Environmental Science, 22. Lien externe

Liaghat, T., Guibault, F., Nennemann, B., & Allenbach, L. (novembre 2014). Two-way fluid-structure coupling in vibration and damping analysis of an oscillating hydrofoil [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe

Arabi, S., Camarero, R., & Guibault, F. (2014). Unstructured meshes for large body motion using mapping operators. Mathematics and Computers in Simulation, 106, 26-43. Lien externe

Galvan, S., Reggio, M., & Guibault, F. (juillet 2013). Inlet velocity profile optimization of the turbine 99 draft tube [Communication écrite]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2013), Incline Village, NV, United states. Lien externe

Bahrami, S., Tribes, C., Devals, C., Vu, T. C., & Guibault, F. (juillet 2013). Multi-Objective optimization of runner blades using a multi-fidelity algorithm [Communication écrite]. ASME Power Conference, Boston, MA. Lien externe

Bilal, N., Galinier, P., & Guibault, F. (2013). A new formulation of the set covering problem for metaheuristic approaches. ISRN Operations Research, 2013, 10-10. Lien externe

Petit, F., & Guibault, F. (juillet 2012). A BREP model and mesh errors detecting tool: TopoVisu [Communication écrite]. 9th IFIP WG 5.1 International Conference on Product Lifecycle Management (PLM 2012), Montréal, Québec. Lien externe

Vu, T. C., Devals, C., Disciullo, J., Iepan, H., Zhang, Y., & Guibault, F. (août 2012). CFD methodology for desynchronized guide vane torque prediction and validation with experimental data [Communication écrite]. 26th IAHR Symposium on Hydraulic Machinery and Systems (8 pages). Lien externe

Sirois, Y., McKenty, F., Gravel, L., & Guibault, F. (2012). Hybrid mesh adaptation applied to industrial numerical combustion. International Journal for Numerical Methods in Fluids, 70(2), 222-245. Lien externe

Galvan, S., Reggio, M., & Guibault, F. (juillet 2012). Optimization of the inlet velocity profile in a conical diffuser [Communication écrite]. Fluids Engineering Division Summer Meeting, Puerto Rico, USA. Lien externe

Dionne, O., Assi, K. C., Grenier, S., Labelle, H., Guibault, F., & Cheriet, F. (mai 2012). Simulation of the postoperative trunk appearance in scoliosis surgery [Communication écrite]. 9th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI 2012), Barcelona, Spain. Lien externe

Aravi, S., Camarero, R., & Guibault, F. (mai 2012). Unstructured mesh motion using sliding cells and mapping domains [Communication écrite]. 20th Annual Conference of the CFD Society of Canada, Canmore,Alberta, Canada. Non disponible

Joubarne, É., & Guibault, F. (2011). 3D Metric-based anisotropic mesh adaptation for vortex capture. Mathematics and Computers in Simulation, 82(1), 163-180. Lien externe

Galvan, S., Reggio, M., Guibault, F., & Gutierrez, H. (février 2011). Analisis del flujo en el modelo del aspirador de la turbina 99 : resultado de la optimizacion del perfil de velocidades en la entrada [Communication écrite]. 12. Congreso y Exposición Latinoamericana de Turbomaquinaria, Querétaro, Mexico. Non disponible

Mulu-Geberkiden, B., Vu, T. C., Guibault, F., & Cervantes, M. J. (octobre 2011). Kaplan draft tube simulations and validation with Porjus-U9 test model [Communication écrite]. HYDRO-Conference, Prague, République Tchèque. Non disponible

Arabi, S., Camarero, R., & Guibault, F. (juillet 2011). Moving grids by unstructured computation domain mesh mapping [Communication écrite]. 11th US National Congress on Computational Mechanics, Minneapolis, MN, USA. Non disponible

Joubarne, E., Guibault, F., Braun, O., & Avellan, F. (2011). Numerical capture of wing tip vortex improved by mesh adaptation. International Journal for Numerical Methods in Fluids, 67(1), 8-32. Lien externe

Vu, T. C., Devals, C., Zhang, Y., Nennemann, B., & Guibault, F. (2011). Steady and unsteady flow computation in an elbow draft tube with experimental validation. International Journal of Fluid Machinery and Systems, 4(1), 85-96. Lien externe

Labbé, P., Dompierre, J., Vallet, M.-G., & Guibault, F. (2011). Verification of three-dimensional anisotropic adaptive processes. International Journal for Numerical Methods in Engineering, 88(4), 350-369. Lien externe

Galvan, S., Reggio, M., & Guibault, F. (2010). Inlet velocity profile optimization of the turbine 99 draft tube. Lien externe

Sirois, Y., Dompierre, J., Vallet, M.-G., & Guibault, F. (2010). Hybrid mesh smoothing based on Riemannian metric non-conformity minimization. Finite Elements in Analysis and Design, 46(1-2), 47-60. Lien externe

Vu, T. C., Devals, C., Zhang, Y., Nennemann, B., & Guibault, F. (septembre 2010). Steady and unsteady flow computation in an elbow dr aft tube with experimental validation [Communication écrite]. 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. Lien externe

Thériault, J., Cheriet, F., & Guibault, F. (juin 2008). Automatic detection of the back valley on scoliotic trunk using polygonal surface curvature [Communication écrite]. 5th International Conference on Image Analysis and Recognition (ICIAR 2008), Povoa de Varzim, Portugal. Lien externe

Tribes, C., Guibault, F., Farinas, M.-I., Dubé, J.-F., Murry, N., Vu, T. C., & Demers, É. (octobre 2008). Combining optimization techniques and conventional engineering practices to design francis runners [Communication écrite]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Non disponible

Haroutunian, A., Guibault, F., Vu, T. C., & Trépanier, J.-Y. (octobre 2008). Draft tube pier leading edge shape optimization [Communication écrite]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Non disponible

Wang, Y., Guibault, F., & Camarero, R. (2008). Eikonal Equation-Based Front Propagation for Arbitrary Complex Configurations. International Journal for Numerical Methods in Engineering, 73(2), 226-247. Lien externe

Camarero, R., Courchesne, O., & Guibault, F. (juin 2008). Hybrid mesh validation and visualization [Communication écrite]. International conference on Numerical geometry, grid generation and scientific computing, Moscow. Lien externe

Vu, T.-C., Le Roy, V., & Guibault, F. (octobre 2008). Hydraulic stepped seal optimization [Communication écrite]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Non disponible

Bedwani, S., Guibault, F., & Rochefort, A. (2008). Nanoscale Adaptive Meshing for Rapid Stm Imaging. Journal of Computational Physics, 227(14), 6720-6726. Lien externe

Tribes, C., Guibault, F., Murry, N., Vu, T. C., & Demers, E. Robustness and efficiency of Francis runners managed by optimization [Communication écrite]. Hydro 2008 Conference. Non disponible

Wang, M., & Guibault, F. (octobre 2008). Subdivision-based geometric domain description for integrated mesh adaptation and geometry modification [Communication écrite]. 8th International Meeting on Applied Scientific Computing and Tools for Grid Generation, Approximation and Visualization (IMACS/ISGG Workshop MASCOT 2008), Rome, Italy. Non disponible

Courchesne, O., Guibault, F., Dompierre, J., & Cheriet, F. (août 2007). Adaptive mesh generation of MRI images for 3D reconstruction of human trunk [Communication écrite]. 4th International Conference on Image Analysis and Recognition (ICIAR 2007), Montréal, Québec. Lien externe

Bourgeois, J., Trépanier, J.-Y., Guibault, F., & Tribes, C. (janvier 2007). Characterizing global behaviour of approximation functions [Communication écrite]. 45th AIAA Aerospace Sciences Meeting, Reno, NV, United States. Lien externe

Guibault, F. (septembre 2007). A compact and flexible data structure for hybrid mesh storage [Communication écrite]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Non disponible

Dompierre, J., Guibault, F., Dubé, J.-F., Lepan, H., & Vu, T. C. (septembre 2007). Hybrid O-mesh generation for hydraulic vane optimization [Communication écrite]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Non disponible

Vallet, M.-G., Manole, C.-M., Dompierre, J., Dufour, S., & Guibault, F. (2007). Numerical comparison of some hessian recovery techniques. International Journal for Numerical Methods in Engineering, 72(8), 987-1007. Lien externe

Guibault, F., Thériault, J., Vallet, M.-G., & Cheriet, F. (janvier 2007). On surface curvature approximations from a polygon mesh [Communication écrite]. 5th Curves and Surfaces Conference, Avignon, France. Non disponible

Labbé, P., Guibault, F., Vallet, M.-G., & Dompierre, J. (septembre 2007). Verification of three-dimensional unstructured anisotropic adaptive methods [Communication écrite]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Non disponible

Joubarne, E., Guibault, F., Braun, O., & Avellan, F. (septembre 2007). Vorticity-based mesh adaptation for vortex capture [Communication écrite]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Non disponible

Sirois, Y., Dompierre, J., Vallet, M. G., & Guibault, F. Mesh Smoothing Based on Riemannian Metric Non-Conformity Minimization [Communication écrite]. 15th International Meshing Roundtable. Lien externe

Puente, L. R., Reggio, M., & Guibault, F. (octobre 2006). Optimizing the shape of a hydraulic turbine draft tube [Optimizacion de la forma de un tubo aspirador una turbina hidraulica]. [Communication écrite]. 22nd Latin America International Symposium on Hydraulic Structures, Ciudad Guayana, Venezuela. Non disponible

Guibault, F., Zhang, Y., Dompierre, J., & Vu, T. C. (octobre 2006). Robust and automatic CAD-based structures mesh generation for hydraulic turbine component optimization [Communication écrite]. 23rd IAHR Symposium, Yokohama, Japan. Non disponible

Dubé, J. F., Guibault, F., Vallet, M.-G., & Trépanier, J.-Y. (janvier 2006). Turbine Blade Reconstruction and Optimization Using Subdivision Surfaces [Communication écrite]. 44th AIAA Aerospace Sciences Meeting and Exhibit. Lien externe

Tchon, K.-F., Dompierre, J., Vallet, M.-G., Guibault, F., & Camarero, R. (2006). Two-dimensional metric tensor visualization using pseudo-meshes. Engineering with Computers, 22(2), 121-131. Lien externe

Tchon, K.-F., Guibault, F., Dompierre, J., & Camarero, R. (juin 2005). Adaptive hybrid meshing using metric tensor line networks [Communication écrite]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. Lien externe

Bentamy, A., Guibault, F., & Trépanier, J.-Y. (janvier 2005). Aerodynamic optimization of a realistic aircraft wing [Communication écrite]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. Lien externe

Dompierre, J., Vallet, M.-G., Labbé, P., & Guibault, F. (2005). An analysis of simplex shape measures for anisotropic meshes. Computer Methods in Applied Mechanics and Engineering, 194(48-49), 4895-4914. Lien externe

Wang, Y. L., Guibault, F., & Camarero, R. (septembre 2005). Automatic Near-Body Domain Decomposition Using the Eikonal Equation [Communication écrite]. 14th International Meshing Roundtable, San Diego, CA, USA. Lien externe

Iepan, H., Guibault, F., Vallet, M.-G., & Magnan, R. (janvier 2005). CGNS-based data model for turbine blade optimization [Communication écrite]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. Lien externe

Bentamy, A., Guibault, F., & Trépanier, J.-Y. (2005). Cross-Sectional Design With Curvature Constraints. Computer-Aided Design, 37(14), 1499-1508. Lien externe

Sirois, Y., Dompierre, J., Vallet, M.-G., & Guibault, F. (2005). Measuring the conformity of non-simplicial elements to an anisotropic metric field. International Journal for Numerical Methods in Engineering, 64(14), 1944-1958. Lien externe

Wang, Y., Guibault, F., Camarero, R., & Tchonx, K.-F. (juin 2005). A parameterization transporting surface offset construction method based on the Eikonal equation [Communication écrite]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. Lien externe

Tchon, K.-F., Khachan, M., Guibault, F., & Camarero, R. (2005). Three-Dimensional Anisotropic Geometric Metrics Based on Local Domain Curvature and Thickness. Computer-Aided Design, 37(2), 173-187. Lien externe

Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (2004). Universal measure of the conformity of a mesh with respect to an anisotropic metric field. International Journal for Numerical Methods in Engineering, 61(61), 2675-2695. Lien externe

Laflamme, S., Dompierre, J., Guibault, F., & Roy, R. (2003). Applying Parmetis to Structured Remeshing for Industrial Cfd Applications. International Journal of High Performance Computing Applications, 17(1), 63-76. Lien externe

Puente, L. R., Reggio, M., & Guibault, F. (janvier 2003). Automatic shape optimization of a hydraulic turbine draft tube [Communication écrite]. 11th Annual Conference of the CFD Society of Canada. Non disponible

Khachan, M., Guibault, F., & Deddi, H. (2003). Characterization of Trimmed Nurbs Surface Boundaries Using Topological Criteria. Numerical Algorithms, 34(2-4), 355-366. Lien externe

Page, F., & Guibault, F. Collision Detection Algorithm for Nurbs Surfaces in Interactive Applications [Communication écrite]. Canadian Conference on Electrical and Computer Engineering (CCECE 2003). Lien externe

Tchon, K.-, Khachan, M., Guibault, F., & Camarero, R. (janvier 2003). Constructing anisotropic geometric metrics using octrees and skeletons [Communication écrite]. 12th International Meshing Round Table, Santa-Fe. Lien externe

Dompierre, J., Labbé, P., & Guibault, F. (juin 2003). Controlling approximation error [Communication écrite]. 2nd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA. Lien externe

Zhou, Q., Mahdavi, B., Liu, D. J., Guibault, F., Ozell, B., & Trépanier, J.-Y. (juin 2001). A distribution protocol for engineering analysis application [Communication écrite]. 15th Annual International Symposium on High Performance Computing Systems and Applications, Windsor, Ontario, Canada. Non disponible

Laflamme, S., Dompierre, J., Guibault, F., & Roy, R. (mai 2003). Issues in the parallelization of the OORT remeshing toolkit using MPI-based communications [Communication écrite]. Canadian Conference on Electrical and Computer Engineering (CCECE 2003), Montréal, Québec. Lien externe

Chen, B., Bouhemhem, D., Ndiaye, A., Guibault, F., Ozell, B., & Trépanier, J.-Y. (juin 2001). An Object-Oriented Application Framework for Distributed Engineering Analysis and Optimization [Communication écrite]. 15th Annual International Symposium on High Performance Computing Systems and Applications, Windsor, Ontario, Canada. Lien externe

Dompierre, J., Vallet, M.-G., Labbé, P., & Guibault, F. (janvier 2003). On simplex shape measures with extension for anisotropic meshes [Communication écrite]. Workshop on Mesh Quality and Dynamic Meshing, Livermire, CA. Non disponible

Tchon, K.-T., Guibault, F., Dompierre, J., Labbé, P., & Camarero, R. (janvier 2003). Solution adaptative refinement of multiblock decompositions [Communication écrite]. 16th AIAA Computational Fluid Dynamics Conference, Orlando, Floride, USA. Lien externe

Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (janvier 2003). Universal measure of the conformity of a mesh with respect to an anisotropic metric field [Communication écrite]. Applied Mathematics and Applications of Mathematics (AMAM 2003), Nice, France. Non disponible

Zhou, Q., Mahdavi, B., Liu, D. J., Guibault, F., Ozell, B., & Trépanier, J.-Y. (juin 2001). A Web-Based Distribution Protocol for Large Scale Analysis and Optimization Applications [Communication écrite]. 15th Annual International Symposium on High Performance Computing Systems and Applications, Windsor, Ontario, Canada. Lien externe

Guibault, F., Labbé, P., & Dompierre, J. (janvier 2002). Adaptivity works! Controling the interpolation error in 3D [Communication écrite]. 5th World Congress on Computational Mechanics, Vienne. Non disponible

Trépanier, J.-Y., Guibault, F., & Ozell, B. (janvier 2002). The architecture and design of a distributed framework for multidisciplinary analysis [Communication écrite]. 40th AIAA Aerospace Sciences Meeting & Exhibit. Lien externe

Trépanier, J.-Y., Guibault, F., & Ozell, B. (septembre 2002). A configurable framework for multidisciplinary analysis integration and management [Communication écrite]. 23rd International Congress on Aeronautical Sciences, Toronto, Ont., Canada. Lien externe

Guibault, F., Bentamy, A., & Trépanier, J.-Y. (janvier 2002). Constraints specifications on nurbs surfaces for wing geometric representation [Communication écrite]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta. Lien externe

Trépanier, J.-Y., Ndiaye, A., Guibault, F., & Leblond, D. (septembre 2002). Evaluation of the VADOR MDO framework on a flexible wing multidisciplinary analysis problem [Communication écrite]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Lien externe

Gougeon, A., & Guibault, F. (janvier 2002). Interpolation of NURBS sections with C0 constraints [Communication écrite]. 5th World Conference on Computational Mechanics. Non disponible

Malouin, E., Dompierre, J., Guibault, F., & Roy, R. Ip-Oort : a Parallel Remeshing Toolkit [Communication écrite]. 9th European Parallel Virtual Machine and Message Passing Interface Users Group Meeting (PVM/MPI 2002), Linz, Austria. Lien externe

Guibault, F., Camarero, R., & Vu, T. C. (janvier 2002). Issues in hydraulic design automation [Communication écrite]. Hydro 2002, Turquie. Non disponible

Labbé, P., Guibault, F., Dompierre, J., Tribes, C., Vallet, M.-G., & Trépanier, J.-Y. (janvier 2002). Pirate - Towards a STEP compliant MDO environnement [Communication écrite]. 40th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, USA. Lien externe

Sirois, Y., Dompierre, J., Vallet, M.-G., Labbé, P., & Guibault, F. (janvier 2002). Progress on vertex relocation schemes for structured grids in a metric space [Communication écrite]. 8th International Conference on Numerical Grid Generation, Honolulu, USA. Non disponible

Bentamy, A., Trépanier, J.-Y., & Guibault, F. (janvier 2002). Wing shape optimization using a constrained NURBS surface geometrical representation [Communication écrite]. 23rd International Congress of Aeronautical Sciences. Lien externe

Lépine, J., Guibault, F., Trépanier, J.-Y., & Pepin, F. (2001). Optimized Nonuniform Rational B-Spline Geometrical Representation for Aerodynamic Design of Wings. AIAA Journal, 39(11), 2033-2041. Lien externe

Dompierre, J., Labbé, P., Vallet, M.-G., Guibault, F., & Camarero, R. (2001). Critères de forme simpliciaux. Dans George, P.-L. (édit.), Maillage et adaptation (p. 311-348). Non disponible

Bentamy, A., Trépanier, J.-Y., Guibault, F., & Vallet, M. G. Construction of a Constrained Nurbs Surface for Wing Geometrical Representation [Communication écrite]. 48th Annual CASI Conference. Non disponible

Chen, B., Liu, D.-J., Mahdavi, B., Zhou, Q., Bouhemhem, D., Ndiaye, A., Guibault, F., Ozell, B., Pelletier, D., & Trépanier, J.-Y. (avril 2001). A data-centric distributed framework for engineering design [Communication écrite]. 48th Annual CASI Conference, Toronto, Ont., Canada. Non disponible

Chen, B., Liu, D.-J., Mahdavi, B., Zhou, Q., Bouhemhem, D., Ndiaye, A., Guibault, F., Ozell, B., Pelletier, D., & Trépanier, J.-Y. (juillet 2001). A data-centric distributed framework for MDO management [Communication écrite]. 6th International Conference on Computer Supported Cooperative Work in Design, London, Ont., Canada. Lien externe

Labbé, P., Guibault, F., Dompierre, J., Vallet, M.-G., & Trépanier, J.-Y. (janvier 2001). A generic mesher for STEP compliant geometries [Communication écrite]. 48th Annual CASI Conference, Toronto, Canada. Non disponible

Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (janvier 2001). A measure of the conformity of a mesh to an anisotropic metric [Communication écrite]. 10th International Meshing Roundtable, Newport Beach, CA. Non disponible

Bentamy, A., Trépanier, J.-Y., & Guibault, F. (janvier 2001). Wing shape optimization using a constrained NURBS surface geometrical representation [Communication écrite]. 48th Annual CASI Conference. Non disponible

Vu, T. C., Guibault, F., Dompierre, J., Labbé, P., & Camarero, R. (janvier 2000). Computation of fluid flow in a model draft tube using mesh adaptative techniques [Communication écrite]. 20th Hydraulic Machinery and Systems, Charlotte, North Carolina, USA. Non disponible

Labbé, P., Guibault, F., & Camarero, R. (janvier 2000). Core classes for a multi-disciplinary numerical analysis framework [Communication écrite]. 7th International Conference on Numerical Grid Generation in Computational Field Simulations, Whistler, BC. Non disponible

Ndiaye, A., Trépanier, J.-Y., Guibault, F., Ozell, B., & Mahdavi, B. (janvier 2000). Database requirements for an MDO software framework [Communication écrite]. 8th Annual Conference of the Canadian CFD Society. Non disponible

Guibault, F. (janvier 2000). Hybrid mesh optimization for computation of turbo-machinery flow [Communication écrite]. Numerical Tools in Engineering Design Symposium of the Mechanics & Materials in Design Conference (M2D 2000). Non disponible

Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (janvier 2000). Measuring the metric conformity of a mesh [Communication écrite]. 7th International Conference on Numerical Grid Generation in Computational Field Simulations, Whistler, BC. Non disponible

Alzubbi, A., Ndiaye, A., Mahdavi, B., Guibault, F., Ozell, B., & Trépanier, J.-Y. (septembre 2000). On the use of JAVA and RMI in the development of a computer framework for MDO [Communication écrite]. 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA. Lien externe

Guibault, F., Vu, T., & Camarero, R. (1999). Automatic blocking for hybvrid grid generation in hydraulics components. International Journal on Hydropower and Dams, 5(2), 81-86. Non disponible

Guibault, F., Labbé, P., Garon, A., & Camarero, R. (janvier 1998). Automatic topologically based blocking for hybrid grid generation [Communication écrite]. 36th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. Lien externe

Guibault, F., Labbé, P., Camarero, R., & Garon, A. (juillet 1998). Hybrid grid generation controlled by automatic blocking [Communication écrite]. Numerical grid generation in computational field simulations : 6th International conference, London, UK. Non disponible

Guibault, F. (1998). Un mailleur hybride structuré/non structuré en trois dimensions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Ozell, B., Camarero, R., Garon, A., & Guibault, F. (1995). Analysis and visualization tools in CFD, part I: A configurable data extraction environment. Finite Elements in Analysis and Design, 19(4), 295-307. Lien externe

Guibault, F., Garon, A., Ozell, B., & Camarero, R. (1995). Analysis and visualization tools in CFD, part II: A case study in grid adaptivity. Finite Elements in Analysis and Design, 19(4), 309-324. Lien externe

Ozell, B., Guibault, F., Camarero, R., & Magnan, R. (1991). VU: A Configurable Environment for Data Visualization. Dans Degrez, G., & Deconinck, H. (édit.), Computer graphics and flow visualization in computational fluid dynamics . Non disponible

Guibault, F. (1990). Conception d'un logiciel de description d'éléments pour la discrétisation d'équations aux dérivées partielles [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Liste produite: Sun Dec 22 03:45:33 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0