 | Up a level |
François GuibaultDepartment of Computer Engineering and Software Engineering
Profile in the Directory of Experts of Polytechnique Montréal
Collaboration networkThis graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Alsheghri, A., Zhang, Y., Hosseinimanesh, G., Keren, J., Cheriet, F., & Guibault, F. (2024). Robust Segmentation of Partial and Imperfect Dental Arches. Applied Sciences, 14(23), 10784 (20 pages). External link
Alsheghri, A., Ladini, Y., Hosseinimanesh, G., Cheriet, F., Chafi, I., Guibault, F., & Kerem, J. (2024). Adaptive point learning with uncertainty quantification to generate margin lines on prepared teeth. Applied Sciences, 14(20), 9486 (21 pages). Available
Alsheghri, A., Ghadiri, F., Zhang, Y., Lessard, O., Keren, J., Cheriet, F., & Guibault, F. (2022, February). Semi-supervised segmentation of tooth from 3D scanned dental arches [Poster]. SPIE Medical Imaging 2022 : Image processing, San Diego, California, USA (6 pages). External link
Amiri, S., Devals, C., Dompierre, J., Camarero, R., & Guibault, F. (2017, July). Von Karman vortex shedding study with foam-extend-4.0 [Paper]. 12th Open Foam Workshop, Exeter, UK (30 pages). External link
Arabi, S., Camarero, R., & Guibault, F. (2015). Comparison of mapping operators for unstructured meshes. Engineering with Computers, 31(3), 579-595. External link
Arabi, S., Camarero, R., & Guibault, F. (2014). Unstructured meshes for large body motion using mapping operators. Mathematics and Computers in Simulation, 106, 26-43. External link
Aravi, S., Camarero, R., & Guibault, F. (2012, May). Unstructured mesh motion using sliding cells and mapping domains [Paper]. 20th Annual Conference of the CFD Society of Canada, Canmore,Alberta, Canada. Unavailable
Arabi, S., Camarero, R., & Guibault, F. (2011, July). Moving grids by unstructured computation domain mesh mapping [Paper]. 11th US National Congress on Computational Mechanics, Minneapolis, MN, USA. Unavailable
Alzubbi, A., Ndiaye, A., Mahdavi, B., Guibault, F., Ozell, B., & Trépanier, J.-Y. (2000, September). On the use of JAVA and RMI in the development of a computer framework for MDO [Paper]. 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA. External link
Bahrami, S., Khelghatibana, M., Tribes, C., Yi Lo, S., von Fellenberg, S., Trépanier, J.-Y., & Guibault, F. (2017). Application of a territorial-based filtering algorithm in turbomachinery blade design optimization. Engineering Optimization, 49(2), 216-234. External link
Bahrami, S., Tribes, C., Devals, C., Vu, T. C., & Guibault, F. (2016). Multi-fidelity shape optimization of hydraulic turbine runner blades using a multi-objective mesh adaptive direct search algorithm. Applied Mathematical Modelling, 40(2), 1650-1668. External link
Bahrami, S., Tribes, C., Fellenberg, S. , Vu, T. C., & Guibault, F. (2015). Physics-based Surrogate Optimization of Francis Turbine Runner Blades, Using Mesh Adaptive Direct Search and Evolutionary Algorithms. International Journal of Fluid Machinery and Systems, 8(3), 209-219. External link
Bilal, N., Galinier, P., & Guibault, F. (2014). An iterated-tabu-search heuristic for a variant of the partial set covering problem. Journal of Heuristics, 20(2), 143-164. External link
Bahrami, S., Tribes, C., Von Fellenberg, S., Vu, T. C., & Guibault, F. (2014, September). Multi-fidelity design optimization of Francis turbine runner blades [Paper]. 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014, Montréal, QC, Canada. Published in IOP Conference Series: Earth and Environmental Science, 22. External link
Bahrami, S., Tribes, C., Devals, C., Vu, T. C., & Guibault, F. (2013, July). Multi-Objective optimization of runner blades using a multi-fidelity algorithm [Paper]. ASME Power Conference, Boston, MA. External link
Bilal, N., Galinier, P., & Guibault, F. (2013). A new formulation of the set covering problem for metaheuristic approaches. ISRN Operations Research, 2013, 10-10. External link
Bedwani, S., Guibault, F., & Rochefort, A. (2008). Nanoscale Adaptive Meshing for Rapid Stm Imaging. Journal of Computational Physics, 227(14), 6720-6726. External link
Bourgeois, J., Trépanier, J.-Y., Guibault, F., & Tribes, C. (2007, January). Characterizing global behaviour of approximation functions [Paper]. 45th AIAA Aerospace Sciences Meeting, Reno, NV, United States. External link
Bentamy, A., Guibault, F., & Trépanier, J.-Y. (2005, January). Aerodynamic optimization of a realistic aircraft wing [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link
Bentamy, A., Guibault, F., & Trépanier, J.-Y. (2005). Cross-Sectional Design With Curvature Constraints. Computer-Aided Design, 37(14), 1499-1508. External link
Bentamy, A., Trépanier, J.-Y., & Guibault, F. (2002, January). Wing shape optimization using a constrained NURBS surface geometrical representation [Paper]. 23rd International Congress of Aeronautical Sciences. External link
Bentamy, A., Trépanier, J.-Y., Guibault, F., & Vallet, M. G. Construction of a Constrained Nurbs Surface for Wing Geometrical Representation [Paper]. 48th Annual CASI Conference. Unavailable
Bentamy, A., Trépanier, J.-Y., & Guibault, F. (2001, January). Wing shape optimization using a constrained NURBS surface geometrical representation [Paper]. 48th Annual CASI Conference. Unavailable
Chafi, I., Cheriet, F., Keren, J., Zhang, Y., & Guibault, F. (2024, February). 3D generation of dental crown bottoms using context learning [Presentation]. In SPIE Medical Imaging, 2024, San Diego, California, United States. External link
Courchesne, O., Guibault, F., Parent, S., & Cheriet, F. (2015). Patient-specific anisotropic model of human trunk based on MR data. International Journal for Numerical Methods in Biomedical Engineering, 31(7). External link
Camarero, R., Courchesne, O., & Guibault, F. (2008, June). Hybrid mesh validation and visualization [Paper]. International conference on Numerical geometry, grid generation and scientific computing, Moscow. External link
Courchesne, O., Guibault, F., Dompierre, J., & Cheriet, F. (2007, August). Adaptive mesh generation of MRI images for 3D reconstruction of human trunk [Paper]. 4th International Conference on Image Analysis and Recognition (ICIAR 2007), Montréal, Québec. External link
Chen, B., Bouhemhem, D., Ndiaye, A., Guibault, F., Ozell, B., & Trépanier, J.-Y. (2001, June). An Object-Oriented Application Framework for Distributed Engineering Analysis and Optimization [Paper]. 15th Annual International Symposium on High Performance Computing Systems and Applications, Windsor, Ontario, Canada. External link
Chen, B., Liu, D.-J., Mahdavi, B., Zhou, Q., Bouhemhem, D., Ndiaye, A., Guibault, F., Ozell, B., Pelletier, D., & Trépanier, J.-Y. (2001, April). A data-centric distributed framework for engineering design [Paper]. 48th Annual CASI Conference, Toronto, Ont., Canada. Unavailable
Chen, B., Liu, D.-J., Mahdavi, B., Zhou, Q., Bouhemhem, D., Ndiaye, A., Guibault, F., Ozell, B., Pelletier, D., & Trépanier, J.-Y. (2001, July). A data-centric distributed framework for MDO management [Paper]. 6th International Conference on Computer Supported Cooperative Work in Design, London, Ont., Canada. External link
Desrosiers, C., Letenneur, M., Bernier, F., Piché, N., Provencher, B., Cheriet, F., Guibault, F., & Brailovski, V. (2024). Automated porosity segmentation in laser powder bed fusion part using computed tomography: a validity study. Journal of Intelligent Manufacturing, 21 pages. External link
Desrosiers, C., Letenneur, M., Bernier, F., Cheriet, F., Brailovski, V., Piché, N., & Guibault, F. (2022, February). Correlative laser confocal microscopy study and multimmodal 2D/3D registration as ground truth for x-ray inspection of internal defects in LPBF manufacturing [Paper]. 11th Conference on Industrial Computed Tomography (ICT 2022), Wels, Austria. External link
Devals, C., Murry, N., Mullins, B. F., Dompierre, J., Mangani, L., & Guibault, F. (2018, September). CFD-based casing and distributor hydraulic design optimization [Paper]. 29th IAHR Symposium on Hydraulic Machinery and Systems, UK (10 pages). External link
Doulcet, B., Devals, C., Nennemann, B., Gauthier, M., Guibault, F., & Trépanier, J.-Y. (2019, October). Two-way strongly coupled fluid-structure interaction simulations with OpenFOAM [Paper]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). External link
Dompierre, J., Mokwinski, Y., Vallet, M.-G., & Guibault, F. (2017). On ellipse intersection and union with application to anisotropic mesh adaptation. Engineering with Computers, 33(4), 745-766. External link
Devals, C., Vu, T. C., Zhang, Y., Dompierre, J., & Guibault, F. (2016, July). Mesh convergence study for hydraulic turbine draft-tube [Paper]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). External link
Demers, É., Tribes, C., & Guibault, F. (2015). A selective eraser of curvature extrema for B-spline curves. Computers and Graphics (Pergamon), 51, 35-42. External link
Demers, É., Guibault, F., & Tribes, C. (2014, June). Symbolic computation of equi-affine evolute for plane B-spline curves [Paper]. 8th International Conference on Curves and Surfaces, Paris, France. External link
Devals, C., Zhang, Y., Dompierre, J., Vu, T. C., Mangani, L., & Guibault, F. (2014). 3D Casing-Distributor Analysis for Hydraulic Design Application. International Journal of Fluid Machinery and Systems, 8(3), 142-154. External link
Devals, C., Zhang, Y., Dompierre, J., Vu, T. C., Mangani, L., & Guibault, F. (2014, September). 3D casing-distributor analysis with a novel block coupled OpenFOAM solver for hydraulic design application [Paper]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (11 pages). External link
Dubé, D., Bertrand, F., Guibault, F., & Chaouki, J. (2014, June). Efficient Parallelization of the Radioactive Particle Tracking Technique on GPU [Paper]. High-Performance Computing Symposium (HPCS), Halifax, Nouvelle-Écosse, Canada. Unavailable
Dionne, O., Assi, K. C., Grenier, S., Labelle, H., Guibault, F., & Cheriet, F. (2012, May). Simulation of the postoperative trunk appearance in scoliosis surgery [Paper]. 9th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI 2012), Barcelona, Spain. External link
Dompierre, J., Guibault, F., Dubé, J.-F., Lepan, H., & Vu, T. C. (2007, September). Hybrid O-mesh generation for hydraulic vane optimization [Paper]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Unavailable
Dubé, J. F., Guibault, F., Vallet, M.-G., & Trépanier, J.-Y. (2006, January). Turbine Blade Reconstruction and Optimization Using Subdivision Surfaces [Paper]. 44th AIAA Aerospace Sciences Meeting and Exhibit. External link
Dompierre, J., Vallet, M.-G., Labbé, P., & Guibault, F. (2005). An analysis of simplex shape measures for anisotropic meshes. Computer Methods in Applied Mechanics and Engineering, 194(48-49), 4895-4914. External link
Dompierre, J., Labbé, P., & Guibault, F. (2003, June). Controlling approximation error [Paper]. 2nd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA. External link
Dompierre, J., Vallet, M.-G., Labbé, P., & Guibault, F. (2003, January). On simplex shape measures with extension for anisotropic meshes [Paper]. Workshop on Mesh Quality and Dynamic Meshing, Livermire, CA. Unavailable
Dompierre, J., Labbé, P., Vallet, M.-G., Guibault, F., & Camarero, R. (2001). Critères de forme simpliciaux. In George, P.-L. (ed.), Maillage et adaptation (pp. 311-348). Unavailable
Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2020). Moving meshes in complex configurations using the composite sliding grid method. Computers & Fluids, 206, 104256 (16 pages). External link
Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2017). Unstructured grid smoothing for turbomachinery applications. International Journal of Fluid Machinery and Systems, 10(4), 421-431. External link
Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2014, September). Comparison of two mesh smoothing techniques for unstructured grids [Paper]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (10 pages). External link
Galvan, S., Reggio, M., & Guibault, F. (2015). Numerical optimization of the inlet velocity profile ingested by the conical draft tube of a hydraulic turbine. Journal of Fluids Engineering, Transactions of the ASME, 137(7). External link
Galvan, S., Reggio, M., Guibault, F., & Solorio, G. (2015). Quantitative and qualitative analysis of the flow field development through T99 draft tube caused by optimized inlet velocity profiles. International Journal of Fluid Machinery and Systems, 8(4), 283-293. External link
Galván, S., Reggio, M., & Guibault, F. (2014). Assessment Study of K-ɛ Turbulence Models and Near-Wall Modeling for Steady State Swirling Flow Analysis in Draft Tube UsingFluent. Engineering Applications of Computational Fluid Mechanics, 5(4), 459-478. External link
Galvan, S., Reggio, M., Guibault, F., & Castro, L. (2014, September). Numerical analysis of the turbine 99 draft tube flow field provoked by redesigned inlet velocity profiles [Paper]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (11 pages). External link
Galvan, S., Reggio, M., & Guibault, F. (2013, July). Inlet velocity profile optimization of the turbine 99 draft tube [Paper]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2013), Incline Village, NV, United states. External link
Galvan, S., Reggio, M., & Guibault, F. (2012, July). Optimization of the inlet velocity profile in a conical diffuser [Paper]. Fluids Engineering Division Summer Meeting, Puerto Rico, USA. External link
Galvan, S., Reggio, M., Guibault, F., & Gutierrez, H. (2011, February). Analisis del flujo en el modelo del aspirador de la turbina 99 : resultado de la optimizacion del perfil de velocidades en la entrada [Paper]. 12. Congreso y Exposición Latinoamericana de Turbomaquinaria, Querétaro, Mexico. Unavailable
Galvan, S., Reggio, M., & Guibault, F. (2010). Inlet velocity profile optimization of the turbine 99 draft tube. External link
Guibault, F. (2007, September). A compact and flexible data structure for hybrid mesh storage [Paper]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Unavailable
Guibault, F., Thériault, J., Vallet, M.-G., & Cheriet, F. (2007, January). On surface curvature approximations from a polygon mesh [Paper]. 5th Curves and Surfaces Conference, Avignon, France. Unavailable
Guibault, F., Zhang, Y., Dompierre, J., & Vu, T. C. (2006, October). Robust and automatic CAD-based structures mesh generation for hydraulic turbine component optimization [Paper]. 23rd IAHR Symposium, Yokohama, Japan. Unavailable
Guibault, F., Labbé, P., & Dompierre, J. (2002, January). Adaptivity works! Controling the interpolation error in 3D [Paper]. 5th World Congress on Computational Mechanics, Vienne. Unavailable
Guibault, F., Bentamy, A., & Trépanier, J.-Y. (2002, January). Constraints specifications on nurbs surfaces for wing geometric representation [Paper]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta. External link
Gougeon, A., & Guibault, F. (2002, January). Interpolation of NURBS sections with C0 constraints [Paper]. 5th World Conference on Computational Mechanics. Unavailable
Guibault, F., Camarero, R., & Vu, T. C. (2002, January). Issues in hydraulic design automation [Paper]. Hydro 2002, Turquie. Unavailable
Guibault, F. (2000, January). Hybrid mesh optimization for computation of turbo-machinery flow [Paper]. Numerical Tools in Engineering Design Symposium of the Mechanics & Materials in Design Conference (M2D 2000). Unavailable
Guibault, F., Vu, T., & Camarero, R. (1999). Automatic blocking for hybvrid grid generation in hydraulics components. International Journal on Hydropower and Dams, 5(2), 81-86. Unavailable
Guibault, F., Labbé, P., Garon, A., & Camarero, R. (1998, January). Automatic topologically based blocking for hybrid grid generation [Paper]. 36th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link
Guibault, F., Labbé, P., Camarero, R., & Garon, A. (1998, July). Hybrid grid generation controlled by automatic blocking [Paper]. Numerical grid generation in computational field simulations : 6th International conference, London, UK. Unavailable
Guibault, F. (1998). Un mailleur hybride structuré/non structuré en trois dimensions [Ph.D. thesis, École Polytechnique de Montréal]. Available
Guibault, F., Garon, A., Ozell, B., & Camarero, R. (1995). Analysis and visualization tools in CFD, part II: A case study in grid adaptivity. Finite Elements in Analysis and Design, 19(4), 309-324. External link
Guibault, F. (1990). Conception d'un logiciel de description d'éléments pour la discrétisation d'équations aux dérivées partielles [Master's thesis, Polytechnique Montréal]. Available
Hosseinimanesh, G., Alsheghri, A., Keren, J., Cheriet, F., & Guibault, F. (2024). Personalized dental crown design: A point-to-mesh completion network. Medical Image Analysis, 101, 103439 (13 pages). External link
Hernandez, D., Pasquier, P., & Guibault, F. (2024). Performance of a sedimentation tank for standing column wells coupled with geothermal heat pump systems. Renewable Energy, 239, 121985 (12 pages). External link
Hernandez, D., Pasquier, P., & Guibault, F. (2023, July). Numerical Modelling of a Sedimentation Tank for Enhancing Sediment Removal in Open-Loop Ground Source Heat Pump System of Type Standing Column Well [Paper]. 22nd World Renewable Energy Congress (WREC 2023), Kuala Lumpur, Malaysia. External link
Hosseinimanesh, G., Ghadiri, F., Guibault, F., Cheriet, F., & Keren, J. (2023, October). From Mesh Completion to AI Designed Crown [Paper]. 26th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI 2023), Vancouver, BC, Canada. External link
Hosseinimanesh, G., Ghadiri, F., Alsheghri, A., Zhang, Y., Keren, J., Cheriet, F., & Guibault, F. (2023, February). Improving the quality of dental crown using a transformer-based method [Paper]. Medical Imaging 2023 : Physics of Medical Imaging,, San Diego, CA, USA (8 pages). External link
Hernandez, D., Pasquier, P., & Guibault, F. (2023, April). Numerical simulation of a sedimentation tank applied to an open loop groud heat exchanger system [Paper]. EGU General Assembly, Vienna, Austria. External link
Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016). A numerical study of Francis turbine operation at no-load condition. Journal of Fluids Engineering, 139(1), 60 pages. External link
Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016, July). Unsteady simulation for Francis Turbine during load rejection events [Paper]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2016), Washington, DC, United states (10 pages). External link
Hosseinimanesh, H., Vu, T. C., Devals, C., Nennemann, B., & Guibault, F. (2014, September). A steady-state simulation methodology for predicting runaway speed in Francis turbines [Paper]. 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014, Montréal, QC, Canada. Published in IOP Conference Series: Earth and Environmental Science, 22. External link
Haroutunian, A., Guibault, F., Vu, T. C., & Trépanier, J.-Y. (2008, October). Draft tube pier leading edge shape optimization [Paper]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Unavailable
Iepan, H., Guibault, F., Vallet, M.-G., & Magnan, R. (2005, January). CGNS-based data model for turbine blade optimization [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link
Joubarne, É., & Guibault, F. (2011). 3D Metric-based anisotropic mesh adaptation for vortex capture. Mathematics and Computers in Simulation, 82(1), 163-180. External link
Joubarne, E., Guibault, F., Braun, O., & Avellan, F. (2011). Numerical capture of wing tip vortex improved by mesh adaptation. International Journal for Numerical Methods in Fluids, 67(1), 8-32. External link
Joubarne, E., Guibault, F., Braun, O., & Avellan, F. (2007, September). Vorticity-based mesh adaptation for vortex capture [Paper]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Unavailable
Khani, M., Débanné, P., Guibault, F., Labelle, H., Parent, S., & Cheriet, F. (2024). Automatic assessment of scoliosis surgery outcome on trunk shape using left–right trunk asymmetry. European Spine Journal, 9 pages. External link
Khachan, M., Guibault, F., & Deddi, H. (2003). Characterization of Trimmed Nurbs Surface Boundaries Using Topological Criteria. Numerical Algorithms, 34(2-4), 355-366. External link
Lessard, O., Guibault, F., Keren, J., & Cheriet, F. (2022, March). Dental Restoration using a Multi-Resolution Deep Learning Approach [Paper]. 2022 IEEE 19th International Symposium on Biomedical Imaging (ISBI 2022), Kolkata, India (4 pages). External link
Laug, P., Guibault, F., & Borouchakic, H. (2017). Parallel meshing of surfaces represented by collections of connected regions. Advances in Engineering Software, 103, 13-20. External link
Laug, P., Guibault, F., & Borouchaki, H. (2015, March). Automatic mesh generation of multiface models on multicore processors [Paper]. 4th International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, Dubrovnik, Croatia. External link
Liaghat, T., Guibault, F., Nennemann, B., & Allenbach, L. (2014, November). Two-way fluid-structure coupling in vibration and damping analysis of an oscillating hydrofoil [Paper]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. External link
Labbé, P., Dompierre, J., Vallet, M.-G., & Guibault, F. (2011). Verification of three-dimensional anisotropic adaptive processes. International Journal for Numerical Methods in Engineering, 88(4), 350-369. External link
Labbé, P., Guibault, F., Vallet, M.-G., & Dompierre, J. (2007, September). Verification of three-dimensional unstructured anisotropic adaptive methods [Paper]. 10th ISGG Conference on Numerical Grid Generation, Crete, Greece. Unavailable
Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (2004). Universal measure of the conformity of a mesh with respect to an anisotropic metric field. International Journal for Numerical Methods in Engineering, 61(61), 2675-2695. External link
Laflamme, S., Dompierre, J., Guibault, F., & Roy, R. (2003). Applying Parmetis to Structured Remeshing for Industrial Cfd Applications. International Journal of High Performance Computing Applications, 17(1), 63-76. External link
Laflamme, S., Dompierre, J., Guibault, F., & Roy, R. (2003, May). Issues in the parallelization of the OORT remeshing toolkit using MPI-based communications [Paper]. Canadian Conference on Electrical and Computer Engineering (CCECE 2003), Montréal, Québec. External link
Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (2003, January). Universal measure of the conformity of a mesh with respect to an anisotropic metric field [Paper]. Applied Mathematics and Applications of Mathematics (AMAM 2003), Nice, France. Unavailable
Labbé, P., Guibault, F., Dompierre, J., Tribes, C., Vallet, M.-G., & Trépanier, J.-Y. (2002, January). Pirate - Towards a STEP compliant MDO environnement [Paper]. 40th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, USA. External link
Lépine, J., Guibault, F., Trépanier, J.-Y., & Pepin, F. (2001). Optimized Nonuniform Rational B-Spline Geometrical Representation for Aerodynamic Design of Wings. AIAA Journal, 39(11), 2033-2041. External link
Labbé, P., Guibault, F., Dompierre, J., Vallet, M.-G., & Trépanier, J.-Y. (2001, January). A generic mesher for STEP compliant geometries [Paper]. 48th Annual CASI Conference, Toronto, Canada. Unavailable
Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (2001, January). A measure of the conformity of a mesh to an anisotropic metric [Paper]. 10th International Meshing Roundtable, Newport Beach, CA. Unavailable
Labbé, P., Guibault, F., & Camarero, R. (2000, January). Core classes for a multi-disciplinary numerical analysis framework [Paper]. 7th International Conference on Numerical Grid Generation in Computational Field Simulations, Whistler, BC. Unavailable
Labbé, P., Dompierre, J., Vallet, M.-G., Guibault, F., & Trépanier, J.-Y. (2000, January). Measuring the metric conformity of a mesh [Paper]. 7th International Conference on Numerical Grid Generation in Computational Field Simulations, Whistler, BC. Unavailable
Mortazavinia, Z., Camarero, R., & Guibault, F. (2018). Three-dimensional Analysis of Two-way Fluid-structure Interaction on a Flexible Hydrofoil in Viscous Flow. International Journal of Fluid Machinery and Systems, 11(3), 333-343. External link
Mohebpour, M. R., Guibault, F., & Cheriet, F. (2017, July). Mesh-based active model initialization for multiple organ segmentation in MR images [Paper]. 14th International Conference on Image Analysis and Recognition (ICIAR 2017), Montréal, Québec. External link
Mulu, B. G., Cervantes, M. J., Devals, C., Vu, T. C., & Guibault, F. (2015). Simulation-based investigation of unsteady flow in near-hub region of a Kaplan turbine with experimental comparison. Engineering Applications of Computational Fluid Mechanics, 9(1), 139-156. Available
Mulu-Geberkiden, B., Vu, T. C., Guibault, F., & Cervantes, M. J. (2011, October). Kaplan draft tube simulations and validation with Porjus-U9 test model [Paper]. HYDRO-Conference, Prague, République Tchèque. Unavailable
Malouin, E., Dompierre, J., Guibault, F., & Roy, R. Ip-Oort : a Parallel Remeshing Toolkit [Paper]. 9th European Parallel Virtual Machine and Message Passing Interface Users Group Meeting (PVM/MPI 2002), Linz, Austria. External link
Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification, Part I: Convergence rate loss diagnosis. Mathematics and Computers in Simulation, 147, 152-171. External link
Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification. Part II: Boundary condition non-orthogonal correction. Mathematics and Computers in Simulation, 147, 172-193. External link
Ndiaye, A., Trépanier, J.-Y., Guibault, F., Ozell, B., & Mahdavi, B. (2000, January). Database requirements for an MDO software framework [Paper]. 8th Annual Conference of the Canadian CFD Society. Unavailable
Ozell, B., Camarero, R., Garon, A., & Guibault, F. (1995). Analysis and visualization tools in CFD, part I: A configurable data extraction environment. Finite Elements in Analysis and Design, 19(4), 295-307. External link
Ozell, B., Guibault, F., Camarero, R., & Magnan, R. (1991). VU: A Configurable Environment for Data Visualization. In Degrez, G., & Deconinck, H. (eds.), Computer graphics and flow visualization in computational fluid dynamics . Unavailable
Plastre, L., Devals, C., Gauthier, M., Nennemann, B., Trépanier, J.-Y., & Guibault, F. (2019, October). Cavitation erosion prediction based on a multi-scale method [Paper]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). External link
Piche, N., Cheriet, F., & Guibault, F. (2016, September). A new topological descriptor for contextual feature indexing [Paper]. IEEE International Conference on Image Processing (ICIP 2016), Phoenix, AZ. External link
Petit, F., & Guibault, F. (2012, July). A BREP model and mesh errors detecting tool: TopoVisu [Paper]. 9th IFIP WG 5.1 International Conference on Product Lifecycle Management (PLM 2012), Montréal, Québec. External link
Puente, L. R., Reggio, M., & Guibault, F. (2006, October). Optimizing the shape of a hydraulic turbine draft tube [Optimizacion de la forma de un tubo aspirador una turbina hidraulica]. [Paper]. 22nd Latin America International Symposium on Hydraulic Structures, Ciudad Guayana, Venezuela. Unavailable
Puente, L. R., Reggio, M., & Guibault, F. (2003, January). Automatic shape optimization of a hydraulic turbine draft tube [Paper]. 11th Annual Conference of the CFD Society of Canada. Unavailable
Page, F., & Guibault, F. Collision Detection Algorithm for Nurbs Surfaces in Interactive Applications [Paper]. Canadian Conference on Electrical and Computer Engineering (CCECE 2003). External link
Romain, C., Guibault, F., Devals, C., & Nennemann, B. (2016, July). Numerical study of rotor-stator interactions in a hydraulic turbine with Foam-extend [Paper]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). External link
Seifollahi Moghadam, Z., Guibault, F., & Garon, A. (2021). On the evaluation of mesh resolution for large-eddy simulation of internal flows using openfoam. Fluids, 6(1), 24 (17 pages). Available
Sirois, Y., McKenty, F., Gravel, L., & Guibault, F. (2012). Hybrid mesh adaptation applied to industrial numerical combustion. International Journal for Numerical Methods in Fluids, 70(2), 222-245. External link
Sirois, Y., Dompierre, J., Vallet, M.-G., & Guibault, F. (2010). Hybrid mesh smoothing based on Riemannian metric non-conformity minimization. Finite Elements in Analysis and Design, 46(1-2), 47-60. External link
Sirois, Y., Dompierre, J., Vallet, M. G., & Guibault, F. Mesh Smoothing Based on Riemannian Metric Non-Conformity Minimization [Paper]. 15th International Meshing Roundtable. External link
Sirois, Y., Dompierre, J., Vallet, M.-G., & Guibault, F. (2005). Measuring the conformity of non-simplicial elements to an anisotropic metric field. International Journal for Numerical Methods in Engineering, 64(14), 1944-1958. External link
Sirois, Y., Dompierre, J., Vallet, M.-G., Labbé, P., & Guibault, F. (2002, January). Progress on vertex relocation schemes for structured grids in a metric space [Paper]. 8th International Conference on Numerical Grid Generation, Honolulu, USA. Unavailable
Tran, T. D., Nennemann, B., Vu, T. C., & Guibault, F. (2015). Investigation of cavitation models for steady and unsteady cavitating flow simulation. International Journal of Fluid Machinery and Systems, 8(4), 240-253. External link
Tran, T. D., Nennemann, B., Vu, T. C., & Guibault, F. (2014, August). Numerical simulation of cavitating flow around a hydrofoil [Paper]. 4th ASME Joint US-European Fluids Engineering Division Summer Meeting (FEDSM 2014), collocated with 12th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Chicago, IL, United states. External link
Thériault, J., Cheriet, F., & Guibault, F. (2008, June). Automatic detection of the back valley on scoliotic trunk using polygonal surface curvature [Paper]. 5th International Conference on Image Analysis and Recognition (ICIAR 2008), Povoa de Varzim, Portugal. External link
Tribes, C., Guibault, F., Farinas, M.-I., Dubé, J.-F., Murry, N., Vu, T. C., & Demers, É. (2008, October). Combining optimization techniques and conventional engineering practices to design francis runners [Paper]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Unavailable
Tribes, C., Guibault, F., Murry, N., Vu, T. C., & Demers, E. Robustness and efficiency of Francis runners managed by optimization [Paper]. Hydro 2008 Conference. Unavailable
Tchon, K.-F., Dompierre, J., Vallet, M.-G., Guibault, F., & Camarero, R. (2006). Two-dimensional metric tensor visualization using pseudo-meshes. Engineering with Computers, 22(2), 121-131. External link
Tchon, K.-F., Guibault, F., Dompierre, J., & Camarero, R. (2005, June). Adaptive hybrid meshing using metric tensor line networks [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. External link
Tchon, K.-F., Khachan, M., Guibault, F., & Camarero, R. (2005). Three-Dimensional Anisotropic Geometric Metrics Based on Local Domain Curvature and Thickness. Computer-Aided Design, 37(2), 173-187. External link
Tchon, K.-, Khachan, M., Guibault, F., & Camarero, R. (2003, January). Constructing anisotropic geometric metrics using octrees and skeletons [Paper]. 12th International Meshing Round Table, Santa-Fe. External link
Tchon, K.-T., Guibault, F., Dompierre, J., Labbé, P., & Camarero, R. (2003, January). Solution adaptative refinement of multiblock decompositions [Paper]. 16th AIAA Computational Fluid Dynamics Conference, Orlando, Floride, USA. External link
Trépanier, J.-Y., Guibault, F., & Ozell, B. (2002, January). The architecture and design of a distributed framework for multidisciplinary analysis [Paper]. 40th AIAA Aerospace Sciences Meeting & Exhibit. External link
Trépanier, J.-Y., Guibault, F., & Ozell, B. (2002, September). A configurable framework for multidisciplinary analysis integration and management [Paper]. 23rd International Congress on Aeronautical Sciences, Toronto, Ont., Canada. External link
Trépanier, J.-Y., Ndiaye, A., Guibault, F., & Leblond, D. (2002, September). Evaluation of the VADOR MDO framework on a flexible wing multidisciplinary analysis problem [Paper]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. External link
Vallet, M.-G., Marcotte, D., & Guibault, F. (2015, May). A spatial uncertainty index on subsurface models for drill hole planning [Paper]. 37th International Symposium on Application of Computers and Operations Research in the Mineral Industry (APCOM 2015), Fairbanks, AK, United states. Unavailable
Vu, T. C., Devals, C., Disciullo, J., Iepan, H., Zhang, Y., & Guibault, F. (2012, August). CFD methodology for desynchronized guide vane torque prediction and validation with experimental data [Paper]. 26th IAHR Symposium on Hydraulic Machinery and Systems (8 pages). External link
Vu, T. C., Devals, C., Zhang, Y., Nennemann, B., & Guibault, F. (2011). Steady and unsteady flow computation in an elbow draft tube with experimental validation. International Journal of Fluid Machinery and Systems, 4(1), 85-96. External link
Vu, T. C., Devals, C., Zhang, Y., Nennemann, B., & Guibault, F. (2010, September). Steady and unsteady flow computation in an elbow dr aft tube with experimental validation [Paper]. 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. External link
Vu, T.-C., Le Roy, V., & Guibault, F. (2008, October). Hydraulic stepped seal optimization [Paper]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Unavailable
Vallet, M.-G., Manole, C.-M., Dompierre, J., Dufour, S., & Guibault, F. (2007). Numerical comparison of some hessian recovery techniques. International Journal for Numerical Methods in Engineering, 72(8), 987-1007. External link
Vu, T. C., Guibault, F., Dompierre, J., Labbé, P., & Camarero, R. (2000, January). Computation of fluid flow in a model draft tube using mesh adaptative techniques [Paper]. 20th Hydraulic Machinery and Systems, Charlotte, North Carolina, USA. Unavailable
Wang, Y., Guibault, F., & Camarero, R. (2008). Eikonal Equation-Based Front Propagation for Arbitrary Complex Configurations. International Journal for Numerical Methods in Engineering, 73(2), 226-247. External link
Wang, M., & Guibault, F. (2008, October). Subdivision-based geometric domain description for integrated mesh adaptation and geometry modification [Paper]. 8th International Meeting on Applied Scientific Computing and Tools for Grid Generation, Approximation and Visualization (IMACS/ISGG Workshop MASCOT 2008), Rome, Italy. Unavailable
Wang, Y. L., Guibault, F., & Camarero, R. (2005, September). Automatic Near-Body Domain Decomposition Using the Eikonal Equation [Paper]. 14th International Meshing Roundtable, San Diego, CA, USA. External link
Wang, Y., Guibault, F., Camarero, R., & Tchonx, K.-F. (2005, June). A parameterization transporting surface offset construction method based on the Eikonal equation [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. External link
Zagre, G. É. P., Marcotte, D., Gamache, M., & Guibault, F. (2019). New Tabu Algorithm for Positioning Mining Drillholes with Blocks Uncertainty. Natural Resources Research, 28(3), 609-629. External link
Zhou, Q., Mahdavi, B., Liu, D. J., Guibault, F., Ozell, B., & Trépanier, J.-Y. (2001, June). A distribution protocol for engineering analysis application [Paper]. 15th Annual International Symposium on High Performance Computing Systems and Applications, Windsor, Ontario, Canada. Unavailable
Zhou, Q., Mahdavi, B., Liu, D. J., Guibault, F., Ozell, B., & Trépanier, J.-Y. (2001, June). A Web-Based Distribution Protocol for Large Scale Analysis and Optimization Applications [Paper]. 15th Annual International Symposium on High Performance Computing Systems and Applications, Windsor, Ontario, Canada. External link
