 | Monter d'un niveau |
Alavitabari, S., Brassard, D., Ponton, S., Boudreault, R., Girard-Lauriault, P.-L., & Tavares, J. R. (2026). Boosting the Atmospheric Water Harvesting of Carbon Xerogels by CO₂ Physical Activation: Effect of Pyrolysis Conditions. Industrial & Engineering Chemistry Research, 65(3), 1664-1678. Lien externe
Bieuville, P., Majeau-Bettez, G., & De Bortoli, A. (2026). Technology flexibility and sobriety to address shortage of energy-transition metals. Nature Sustainability. Lien externe
Gao, J., Abriat, C., Laekas-Hameder, M., Virgilio, N., Dozois, C. M., Quach, C., Heuzey, M.-C., Lemay, G., & Daigle, F. (2026). Microbiological and rheological dynamics of mixed biofilms formed by bacteria and eukaryotic virus. Scientific Reports. Lien externe
Gareau-Lajoie, A., Djogap Feujo, C. J., Rodrigues, D., Gosselin, M.-È., & Chioua, M. (2026). Titanium Dioxide Content Soft Sensor Development for Pilot‐Scale Ilmenite Electric Arc Furnace Using BiLSTM and BiGRU Recurrent Neural Networks. Journal of Advanced Manufacturing and Processing, 14 pages. Lien externe
Khoshoei, A., Samarakone, S., Fazeli, S., Bréant, A., Bouajila, A., & Boffito, D. C. (2026). Mechanochemical Dephosphorization and Ultrasound-Intensified Leaching of Rare Earths from Low-Thorium Monazite Ore. Chemical Engineering and Processing - Process Intensification, 110723. Lien externe
Kibret, H. A., Shabanian, J., Chidami, S., & Chaouki, J. (2026). Decarbonizing steam methane reforming through direct Joule-heated fluidized bed reactor. International Journal of Hydrogen Energy, 213, 153797 (19 pages). Lien externe
Lassus, A., Favis, B. D., & Virgilio, N. (2026). Controlling and Modeling Phase Separation Behavior in Ternary Systems of PEEK with meta - and para -PEI. Macromolecules, 59(3), 1665-1678. Lien externe
Lehnertz, M. S., Dufour, S., Becker, T., Thiele, I., Waldburger, S., Raquez, J.-M., Herres-Pawlis, S., Riedel, S. L., & Palkovits, R. (2026). Impact of molecular weight, additives and copolymers on the chemical recycling of (bio)plastics using solid ruthenium-based catalysts. RSC Sustainability, 11 pages. Disponible
Liu, Y., Li, H., Jin, L., Zhou, D., & Liu, S. (2026). Towards low-carbon zinc extraction from zinc-containing electric arc furnace dust: A review of pyrometallurgical and hydrometallurgical routes. Journal of environmental chemical engineering, 14(2), 121284 (18 pages). Lien externe
Ma, Y., Guo, J., Dubs, A. B., Ganko, K., & Braatz, R. D. (2026). Adaptive nonlinear model predictive control of monoclonal antibody glycosylation in CHO cell culture. Control Engineering Practice, 169, 106731 (15 pages). Lien externe
Monk, R., Matta, J., Nunes Silva Vieira, D., Marvi, Z., Cruzado, G., Harvey, E. J., Barralet, J. E., & Merle, G. (2026). Introducing Hematene as a 2D Nano-Reinforcement for Monetite Scaffolds in Bone Regeneration. ACS Applied Bio Materials, 9(3), 1703-1714. Lien externe
Moradi Kazerooni, N., Eames, D., Boffito, D. C., Galli, F., & Patience, G. S. (2026). Forced concentration cycling of methane and air over Ni(-C)/NiAl₂O₄ produces less syngas with increasing pressure. Catalysis Today, 115698. Lien externe
Moreau, V., Liberelle, B., Baniahmad, S., Virgilio, N., & De Crescenzo, G. (2026). Highly tunable chitosan and carboxymethylated dextran hydrogels crosslinked with NHS/EDC with potential application for preventing postoperative adhesions. Carbohydrate Polymer Technologies and Applications, 101101. Lien externe
Naasri, S., Therriault, H., Delattre, L., Virgilio, N., Lauzon, M.-A., Faucheux, N., & Paquette, B. (2026). Employing a Combination of Chemoattractants to Trap Glioblastoma Cells in a Macroporous Hydrogel. Pharmaceutics, 18(2), 229 (24 pages). Lien externe
Nekooei, A., & Ajji, A. (2026). Integrating Alkali Lignin into Electrospun PET Nanofibers for Enhanced Viral Protection in Respiratory Masks. ACS Omega, 6500-6512. Lien externe
Ravoahangy, H. Z. N., Majeau-Bettez, G., & Schoefs, O. (2026). Parametrization of biowaste composting system for life cycle assessment. Waste Management, 212, 115337 (12 pages). Disponible
Saadi, N., & Boulay, A.-M. (2026). Microfibers in Life Cycle Assessment: Comparing the Physical Effects of Cellulosic and Synthetic Fibers via Characterization Factors Development. Integrated Environmental Assessment and Management. Lien externe
Safaei, M., Ajji, A., Kessler, S., & Saffar, A. (2026). Controlled sustained release of chlorine dioxide gas from extrusion-cast polymeric films to extend shelf life of strawberries. Applied Food Research, 6(1), 101732. Lien externe
Santos Araque, D. A., Mozaffari, N., Fradette, L., & Kaliaguine, S. (2026). Revisiting the synthesis of dimethyl carbonate from methanol and carbon dioxide. The Canadian Journal of Chemical Engineering, 25 pages. Présentée à Canadian Chemical Engineering Conference (CSChE 2025), Montréal, QC. Lien externe
Sulmoni, E., Moustaine, Z., Liberelle, B., Saleh, W., Kadem, L., Leclerc, G., De Crescenzo, G., Tournoux, F., & Zenses, A.-S. (2026). Mitral chordae tension regulator for simulating various levels of mitral regurgitation in an artificial left heart. Archives of cardiovascular diseases, 119(1), S83-S83. Présentée à 36th European Days of the French Society of Cardiology, Paris, France. Lien externe
Theiri, M., Marinova, M., Chadjaâ, H., & Jolicoeur, M. (2026). Development of a co‐culture of Ureibacillus thermosphaericus and Cupriavidus taiwanensis for inhibitors removal from hemicellulose prehydrolysate. Biotechnology Progress, e70107. Lien externe
Tselekouni, P., Mohseni-Garakani, M., Papa, S., Kim, S. Y., Avramoglu, R. K., Wertheimer, M. R., Ajji, A., Lakatos, P. L., & Rosenzweig, D. H. (2026). A 3D Alginate–Gelatin Co-Culture Model to Study Epithelial–Stromal Interactions in the Gut. Gels, 12(1), 70 (18 pages). Lien externe
Watt, A., Rachella, C., Jaloux, C., Vorstenbosch, J., Hart, A., Tanzer, M., Merle, G., & Barralet, J. (2026). Oxygen and ROS Delivery for Infected Wound Healing and Future Prospects. Advanced Healthcare Materials. Lien externe
Younes, G., Heli, B., & Ajji, A. (2026). Blending Poly(dimethylsiloxane) with Poly(lactic acid) Using Polyhydroxyurethane Additives. ACS Applied Engineering Materials. Lien externe
Koushanpour, A., Raphael, Y., Harvey, E. J., & Merle, G. (2026). Controlling the signal through interfacial design in aptamer-based electrochemical sensors [Commentaire ou lettre]. Sensors & Diagnostics, 12 pages. Lien externe
Lehnertz, M. S., Dufour, S., Becker, T., Thiele, I., Waldburger, S., Raquez, J.-M., Herres-Pawlis, S., Riedel, S. L., & Palkovits, R. (2026). Experimental data to the publication "Impact of molecular weight, additives and copolymers on the chemical recycling of (bio)plastics using solid Ruthenium-based catalysts" [Ensemble de données]. Lien externe
Vaillant, M., Oliveira Ferreira, V., Mainville, W., Lamarre, J.-M., Raymond, V., Chioua, M., & Blais, B. (2026). Surrogate model for heat transfer prediction in impinging jet arrays using dynamic inlet/outlet and flow rate control [Ensemble de données]. Lien externe
