 | Monter d'un niveau |
Abac, A. G., Abouelfettouh, I., Acernese, F., Ackley, K., Adamcewicz, C., Adhicary, S., Adhikari, D., Adhikari, N., Adhikari, R. X., Adkins, V. K., Afroz, S., Agapito, A., Agarwal, D., Agathos, M., Aggarwal, N., Aggarwal, S., Aguiar, O. D., Ahrend, I.-L., Aiello, L., ... Zweizig, J. (2026). All-sky search for long-duration gravitational-wave transients in the first part of the fourth LIGO-Virgo-KAGRA observing run. Physical review. D., 113(8), 082004 (23 pages). Lien externe
Abbasi, R., Ackermann, M., Adams, J., Agarwalla, S. K., Aguilar, J. A., Ahlers, M., Alameddine, J. M., Ali, S., Amin, N. M., Andeen, K., Argüelles, C., Ashida, Y., Athanasiadou, S., Axani, S. N., Babu, R., Bai, X., Baines-Holmes, J., Balagopal V., A., Barwick, S. W., ... Zweizig, J. (2026). Deep Search for Joint Sources of Gravitational Waves and High-energy Neutrinos with IceCube during the Third Observing Run of LIGO and Virgo. The Astrophysical Journal, 1003(1), 41 (32 pages). Lien externe
Abda, M., Berthet, L., Hamedi, M., Hibatullah, D., Piollet, E., Blake, C., Blais, B., & Gosselin, F. (2026). The finite element neural network method to simulate two dimensional partial differential equations and perform parameter identification. Scientific Reports. Lien externe
Agez, M., & Majeau-Bettez, G. (2026). Regioinvent: a regionalized version of ecoinvent integrating detailed trade data. Journal of Industrial Ecology, 16 pages. Accès restreint
Alavitabari, S., Brassard, D., Ponton, S., Boudreault, R., Girard-Lauriault, P.-L., & Tavares, J. R. (2026). Boosting the Atmospheric Water Harvesting of Carbon Xerogels by CO₂ Physical Activation: Effect of Pyrolysis Conditions. Industrial & Engineering Chemistry Research, 65(3), 1664-1678. Lien externe
Benalia, S., Tesfaye, F., Lindberg, D., Hupa, L., Chartrand, P., & Robelin, C. (2026). Thermodynamic Evaluation and Optimization of the (NaCl + Na₂CO₃ + Na₂SO₄ + Na₂S₂O₇ + Na₂CrO₄ + Na₂Cr₂O₇ + Na₂O + KCl + K₂CO₃ + K₂SO₄ + K₂S₂O₇ + K₂CrO₄ + K₂Cr₂O₇ + K₂O) System Involved in High-Temperature Corrosion. ACS Omega, 11(21), 31131-31155. Lien externe
Benoit, I., Bulle, C., & Patouillard, L. (2026). Life Cycle Inventory Database for Consumption in Quebec – Dwellings [Ensemble de données]. Lien externe
Bieuville, P., Majeau-Bettez, G., & De Bortoli, A. (2026). Technology flexibility and sobriety to address shortage of energy-transition metals. Nature Sustainability. Lien externe
Castillo-Sánchez, J.-R., Vazquez Prudencio, A., Lafaye, P., Harvey, J.-P., Leósson, K., & Salloum-Abou-Jaoude, G. (mars 2026). DFT-Informed Thermodynamic Modeling of Al-B with DSC and LIBS-Based Liquidus Validation for Boron Treatment of Aluminum Alloys [Communication écrite]. 155th TMS Annual Meeting & Exhibition, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe
Cicoira, F., & Kim, J. (2026). Printable, self-healing and recyclable PEDOT:PSS/Polyurethane composites for durable bioelectronics [Ensemble de données]. Lien externe
Cicoira, F., Ebrahimi, S., Petrossian, G., Khoomortezaei, S., & Quenneville, É. (2026). EDOT-Acid enables stable PEDOT coatings on Ni-P electrodes through interfacial molecular interactions [Ensemble de données]. Lien externe
Cicoira, F., Fan, J., Saygin, G. D., Mawe Noussi, C., & Dongnang Ngoula, K. C. (2026). Towards standardized high-voltage testing of printed conducting polymer electrodes: influence of electrolyte environment and pulse duration [Ensemble de données]. Lien externe
Costa, E. C. T. A., De Jesus Santana, J., Campos, V. O., Barbosa, F. F., & Patience, G. S. (2026). Experimental methods in chemical engineering: Atomic absorption spectrometry—AAS. Canadian Journal of Chemical Engineering, 19 pages. Lien externe
De Wachter, H., Sonderegger, T., Bourgault, G., & Majeau-Bettez, G. (2026). Towards a mass-balanced ecoinvent life cycle assessment database. Journal of Industrial Ecology, 14 pages. Accès restreint
Du, C., Chhin, D., Wang, M., Cicoira, F., & Mauzeroll, J. (2026). A Forest of Diverging Paths: Quantifying Alternating Current-SECM. ACS electrochemistry., 14 pages. Lien externe
Ebrahimi, S., & Cicoira, F. (2026). Electrodeposition-Optimized PEDOT Interfaces on Printed Circuit Boards for Stable, Low-Impedance Organoid Electrophysiology [Ensemble de données]. Lien externe
Ebrahimi, S., Rönnqvist, M., Ouhimmou, M., & Stuart, P. R. (2026). Tactical-operational optimization framework for forest biomass supply chains: multimodal transport and inventory planning in a Quebec case study. International Journal of Forest Engineering, 14 pages. Lien externe
Ebrahimi, S., Rostami, S., Petrossian, G., Quenneville, É., Dorval-Courchesne, N.-M., Moraes, C., & Cicoira, F. (2026). Electrodeposition-Optimized PEDOT Interfaces on Printed Circuit Boards for Stable, Low-Impedance Organoid Electrophysiology. ACS Applied Materials & Interfaces, 18(19), 27899-27911. Lien externe
Findlay, J., Chartrand, P., Cheneler, D., LeBlanc, D. J., & Degueldre, C. (2026). Thermodynamics of the RbF-UF4 system: a potential fuel candidate for molten salt reactor. The Journal of Chemical Thermodynamics, 216, 107660. Lien externe
Gaboriault, O., Timercan, A., Pelletier, R., Lefebvre, L.-P., Mélançon, D., & Blais, B. (2026). Increase in packing density during multi-layer powder spreading: An experimental and numerical study. Powder Technology, 122460. Lien externe
Gao, J., Abriat, C., Laekas-Hameder, M., Virgilio, N., Dozois, C. M., Quach, C., Heuzey, M.-C., Lemay, G., & Daigle, F. (2026). Microbiological and rheological dynamics of mixed biofilms formed by bacteria and eukaryotic virus. Scientific Reports. Lien externe
Gareau-Lajoie, A., Djogap Feujo, C. J., Rodrigues, D., Gosselin, M.-È., & Chioua, M. (2026). Safety soft sensor development for pilot‐scale ilmenite electric arc furnace using long short‐term memory‐based architecture. The Canadian Journal of Chemical Engineering, 17 pages. Lien externe
Gareau-Lajoie, A., Djogap Feujo, C. J., Rodrigues, D., Gosselin, M.-È., & Chioua, M. (2026). Titanium Dioxide Content Soft Sensor Development for Pilot‐Scale Ilmenite Electric Arc Furnace Using BiLSTM and BiGRU Recurrent Neural Networks. Journal of Advanced Manufacturing and Processing, 14 pages. Lien externe
Gaudreault, J., Komsalov, P., Kuipers, J., Lemire, L., Cass, B., Lamoureux, L., Leroy, J., Corbeil, C. R., Sulea, T., Voyer, R., Joubert, S., Daviau, A., Henry, O., & Lan Pham, P. (2026). CHO Cell Line Selection through Multi-Criteria Analysis Reveals Critical Impact of Gas Overlay. Biotechnology Journal, 21(3), e70206 (25 pages). Lien externe
Grignard, B., Bourguignon, M., Monie, F., Vidil, T., Cramail, H., Perli, G., Sardón, H., Raquez, J.-M., Caillol, S., & Detrembleur, C. (2026). Non-isocyanate polyurethane foams: where we stand and what comes next? Chemical Society Reviews, 45 pages. Lien externe
Grmela, M. (2026). Rheological modeling with GENERIC and with the Onsager principle. Journal of Non-Equilibrium Thermodynamics. Lien externe
Guévremont, O., Gazil, O., Galli, F., Virgilio, N., & Blais, B. (2026). Dataset supporting: "Surface-access limitation in catalytic porous monoliths: Performance diagnosis using pore-resolved CFD" [Ensemble de données]. Lien externe
Houndedoke, M. D., Nickson, D., Pouliot, M., & Patience, G. S. (2026). Multiparameter Effect Study on Lactose and Whey Permeate Conversion to Lactic Acid and HMF Catalysed by Erbium. Molecules, 31(10), 1596. Lien externe
Issa Hamoud, H., Boffito, D. C., & Thomas, A. (2026). Procédé de réduction de la teneur totale en alcalis, de la teneur en chlorure et/ou de la teneur en sulfate de charges d'alimentation solides. [Method for the reduction of the total alkali content, the chloride content and/or the sulphate content of solid feedstocks]. (Brevet no CAWO/2026/050862). Lien externe
Jan Yılmaz Arıkan, E., Alkan Göksu, Y., Altınbay, A., Vatansever, E., Enes Acar, S., Ziya Bidiş, Y., & Nofar, M. (2026). A Green Approach to Surface Modification of Cellulose Nanocrystals via Grafting of Poly(2-hydroxyethyl methacrylate) and Development of Polybutylene–Adipate–Terephthalate-Based Nanocomposites. Journal of Composites Science, 10(3), 139 (17 pages). Lien externe
Karimi, E., Mighri, F., Heuzey, M.-C., & Ajji, A. (2026). Melt Electrospinning of Poly (ε‐Caprolactone)/Polyethylene Oxide/Polyethylene Glycol—Hydroxyapatite Nanocomposite Fibers: Morphology, Properties, and Hydrolytic Degradation. Polymer Engineering and Science, 16 pages. Lien externe
Karimi, E., Mohseni Garakani, M., Heuzey, M.-C., Mighri, F., Rosenzweig, D. H., & Ajji, A. (2026). Bioactive Nanocomposite Scaffolds by Melt Electrospinning of Poly-ε-Caprolactone/Polyethylene Oxide/Polyethylene Glycol-Hydroxyapatite Blends for Bone Tissue Engineering. ACS Applied Bio Materials, 9(11), 4837-4848. Lien externe
Khoshoei, A., Samarakone, S., Fazeli, S., Bréant, A., Bouajila, A., & Boffito, D. C. (2026). Mechanochemical Dephosphorization and Ultrasound-Intensified Leaching of Rare Earths from Low-Thorium Monazite Ore. Chemical Engineering and Processing - Process Intensification, 110723. Lien externe
Kibret, H. A., Shabanian, J., Chidami, S., & Chaouki, J. (2026). Decarbonizing steam methane reforming through direct Joule-heated fluidized bed reactor. International Journal of Hydrogen Energy, 213, 153797 (19 pages). Lien externe
Kim, J., & Cicoira, F. (2026). Printable, self-healing and recyclable PEDOT:PSS/Polyurethane composites for durable bioelectronics. Materials Horizons, 33 pages. Disponible
Klassen, D., Pouchet, C., Simon, W., Smith, I., Lemoine, N., Blais, B., Larose, M., Chouinard, G., Karthikeyan, A., Dumont, M.-J., & Tavares, J. R. (2026). Pheromones impregnated on porous PLA fibers for integrated pest management. Journal of Polymers and the Environment, 34(5), 99 (16 pages). Accès restreint
Klassen, D., Simon, W., Ngoy, O. G., Larose, M., Pouchet, C., Chouinard, G., Dumont, M.-J., & Tavares, J. R. (2026). Release of multicomponent pheromones from porous fibres. The Canadian Journal of Chemical Engineering, 10 pages. Lien externe
Kordjazi, Z., & Ajji, A. (2026). Titanium Dioxide Catalyzed Butadiene Polymer Based Oxygen Scavenging System. (Brevet no CACA 3097347 C). Lien externe
Koushanpour, A., Raphael, Y., Harvey, E. J., & Merle, G. (2026). Controlling the signal through interfacial design in aptamer-based electrochemical sensors [Commentaire ou lettre]. Sensors & Diagnostics, 12 pages. Lien externe
Lafaye, P., & Harvey, J.-P. (2026). On the origin of the non-stoichiometry of the τ1-Al 2 Fe 3 Si 3 solid solution. Journal of Physics Condensed Matter. Lien externe
Lassus, A., Favis, B. D., & Virgilio, N. (2026). Controlling and Modeling Phase Separation Behavior in Ternary Systems of PEEK with meta - and para -PEI. Macromolecules, 59(3), 1665-1678. Lien externe
Lehnertz, M. S., Dufour, S., Becker, T., Thiele, I., Waldburger, S., Raquez, J.-M., Herres-Pawlis, S., Riedel, S. L., & Palkovits, R. (2026). Experimental data to the publication "Impact of molecular weight, additives and copolymers on the chemical recycling of (bio)plastics using solid Ruthenium-based catalysts" [Ensemble de données]. Lien externe
Lehnertz, M. S., Dufour, S., Becker, T., Thiele, I., Waldburger, S., Raquez, J.-M., Herres-Pawlis, S., Riedel, S. L., & Palkovits, R. (2026). Impact of molecular weight, additives and copolymers on the chemical recycling of (bio)plastics using solid ruthenium-based catalysts. RSC Sustainability, 11 pages. Disponible
Liu, Y., Li, H., Jin, L., Zhou, D., & Liu, S. (2026). Towards low-carbon zinc extraction from zinc-containing electric arc furnace dust: A review of pyrometallurgical and hydrometallurgical routes. Journal of environmental chemical engineering, 14(2), 121284 (18 pages). Lien externe
Ma, Y., Guo, J., & Braatz, R. D. (2026). GlycoPy: A CasADi-based python framework for hierarchical modeling, optimization, and control of bioprocesses. Computers & Chemical Engineering, 213, 109726 (11 pages). Lien externe
Ma, Y., Guo, J., Dubs, A. B., Ganko, K., & Braatz, R. D. (2026). Adaptive nonlinear model predictive control of monoclonal antibody glycosylation in CHO cell culture. Control Engineering Practice, 169, 106731 (15 pages). Lien externe
Magnaval, G., Corre, S., Mouhoub, M., Margni, M., & Boulay, A.-M. (2026). DSDA-mobility / Beyond techno-centered decarbonization roadmaps: designing demand-side pathways for sustainable mobility [Ensemble de données]. Lien externe
Magnaval, G., Mouhoub, M., Boulay, A.-M., & Margni, M. (2026). Harmonizing the assessment of (green) hydrogen supply chain: a modular and parametrized life cycle assessment framework. Energy & Environmental Science, 28 pages. Lien externe
Mansouri, N. S., Milano, F., Dimidschstein, M., & Lavertu, M. (2026). Environmental impact and experimental reliability of reusing plastic consumables in wet labs. npj Materials Sustainability, 4(1), 14 pages. Lien externe
Mihin, T., Schreiber, L., Savadogo, O., & Tartakovsky, B. (2026). Enhancing microbial electrosynthesis of fatty acids from carbon dioxide by combining bioaugmentation of an acetogenic enrichment and Fe–Sn oxide cathode coating. RSC Advances, 16(15), 13749-13764. Lien externe
Monk, R., Matta, J., Nunes Silva Vieira, D., Marvi, Z., Cruzado, G., Harvey, E. J., Barralet, J. E., & Merle, G. (2026). Introducing Hematene as a 2D Nano-Reinforcement for Monetite Scaffolds in Bone Regeneration. ACS Applied Bio Materials, 9(3), 1703-1714. Lien externe
Moradi Kazerooni, N., Eames, D., Boffito, D. C., Galli, F., & Patience, G. S. (2026). Forced concentration cycling of methane and air over Ni(-C)/NiAl₂O₄ produces less syngas with increasing pressure. [Présentation]. Catalysis Today, 115698. Présentée à 27th Canadian Symposium on Catalysis (CSC 2024), Sherbrooke, Qc, Canada. Lien externe
Moreau, V., Liberelle, B., Baniahmad, S., Virgilio, N., & De Crescenzo, G. (2026). Highly tunable chitosan and carboxymethylated dextran hydrogels crosslinked with NHS/EDC with potential application for preventing postoperative adhesions. Carbohydrate Polymer Technologies and Applications, 101101. Lien externe
Moufakkir, F. Z., Harvey, J.-P., & Robelin, C. (2026). Thermodynamic and phase equilibrium model for the Li, Na, K, Mg, Ca, Mn // Cl, F system, Part I: MnF₂-based binary common-ion sub-systems. The Journal of Chemical Thermodynamics, 107680. Lien externe
Moufakkir, F. Z., Harvey, J.-P., & Robelin, C. (2026). Thermodynamic and phase equilibrium model for the Li, Na, K, Mg, Ca, Mn// Cl, F system: Part II. MnF₂-based ternary common-ion and reciprocal sub-systems. The Journal of Chemical Thermodynamics, 107672. Lien externe
Naasri, S., Therriault, H., Delattre, L., Virgilio, N., Lauzon, M.-A., Faucheux, N., & Paquette, B. (2026). Employing a Combination of Chemoattractants to Trap Glioblastoma Cells in a Macroporous Hydrogel. Pharmaceutics, 18(2), 229 (24 pages). Lien externe
Nekooei, A., & Ajji, A. (2026). Integrating Alkali Lignin into Electrospun PET Nanofibers for Enhanced Viral Protection in Respiratory Masks. ACS Omega, 6500-6512. Lien externe
Oishi, K., Poëti, K., Wei, D., Le Boulanger, K., Chartrand, P., & Harvey, J.-P. (mars 2026). A New Thermodynamic Process-Simulation Tool forSustainable Metallurgy Integrating LCA andOptimization withFactFlow [Communication écrite]. 155th TMS Annual Meeting & Exhibition, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe
Oliveira Ferreira, V., Mainville, W., Raymond, V., Lamarre, J.-M., Hamel, A., Vaillant, M., Chioua, M., & Blais, B. (2026). Active cooling device: A flexible, lab-scale experimental unit to develop spatio-temporal temperature control strategies. HardwareX, e00754. Lien externe
Ospital, L. A. N., Margni, M., & Boulay, A.-M. (mai 2026). Development of LCA Characterization Factors for TRWP Physical Effects and Leachate Ecotoxicity [Communication écrite]. SETAC Europe 36th Annual Meeting, Maastricht, The Netherlands. Lien externe
Patience, G. S., & Galli, F. (2026). Natural Gas Refining Unit for Integration at a Battery Site of an Oil Production Facility. (Demande de brevet no US18/549,674). Lien externe
Patouillard, L., & Pedneault, J. (février 2026). Structured evaluation framework for assessing LLM quality performance in a LCA context [Présentation]. Dans 92nd LCA Discussion Forum, Dübendorf, Switzerland. Disponible
Patouillard, L., De Wachter, H., Hübner, N., Kumar, M., Donaldson, A., Cornago, S., Bartocci, P., & Qingshi, T. (mai 2026). Toward Transparent and Inclusive Applications of Artificial Intelligence in Life Cycle Assessment [Communication écrite]. SETAC Europe 36th Annual Meeting, Maastricht, The Netherlands. Lien externe
Patouillard, L., Greffe, T., Louineau, E., Muller, E., & Bulle, C. (2026). Life cycle inventory database for consumption in Québec – Food consumption [Ensemble de données]. Lien externe
Pellan, M., De Bortoli, A., Bulle, C., & Majeau-Bettez, G. (mai 2026). Advancing green metal supply-chain decisions with Canadian site-specific LCIs [Communication écrite]. SETAC Europe 36th Annual Meeting, Maastricht, The Netherlands. Lien externe
Petrossian, G., Cicoira, F., Miquet-Westphal, F., & Ebrahimi, S. (2026). Double-Network PEDOT:PSS Xerogel Fibers with High Stretchability and Electrical Stability for Wearable Strain Sensing [Ensemble de données]. Lien externe
Petrossian, G., Ebrahimi, S., Cicoira, F., & Miquet-Westphal, F. (2026). Microsphere-templated conductive syntactic foams for recyclable and additively manufactured soft electronics [Ensemble de données]. Lien externe
Petrossian, G., Ebrahimi, S., Miquet-Westphal, F., Xu, H., & Cicoira, F. (2026). Double-network PEDOT:PSS xerogel fibers with high stretchability and electrical stability for wearable strain sensing. Materials Advances. Lien externe
Pomerleau, A., Lafaye, P., Brochu, M., & Harvey, J.-P. (mars 2026). On the Effect of Tramp Elements on the Phase Assemblage of Aluminum Alloys Synthesized with Increased Recycled Content [Communication écrite]. Light Metals 2026, San Diego, CA, USA. Publié dans The minerals, metals & materials series. Lien externe
Ravoahangy, H. Z. N., Majeau-Bettez, G., & Schoefs, O. (2026). Parametrization of biowaste composting system for life cycle assessment. Waste Management, 212, 115337 (12 pages). Disponible
Rhimi, H. (2026). Design of a Hybrid Solar-Wind Microgrid Driving a PEM Electrolyzer for Scalable Hydrogen Production [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Roy, S. (2026). Life cycle inventory data for "Projecting environmental improvements in mineral processing pathways: the case of cathode active material production" [Ensemble de données]. Lien externe
Roy, S., Ali, A.-R., Harvey, J.-P., Herrmann, C., & Fradette, L. (2026). Operationalizing the environmental safe operating space into target distributions for mobility and batteries. npj Sustainable Mobility and Transport, 3(1), 16 pages. Lien externe
Saadi, N., & Boulay, A.-M. (2026). Microfibers in Life Cycle Assessment: Comparing the Physical Effects of Cellulosic and Synthetic Fibers via Characterization Factors Development. Integrated Environmental Assessment and Management. Lien externe
Saadi, N., Hajjar, C., Ospital, L. A. N., Quik, J. T. K., Corella-Puertas, E., Hids, A., Lebrun, M. N., Louvet, J., Tang, Y., Thonemann, N., & Boulay, A.-M. (mai 2026). Microplastics, Tire Particles, and Cellulosic Fibers in LCA: MarILCA Regionalized Multimedia Characterization Factors [Communication écrite]. SETAC Europe 36th Annual Meeting, Maastricht, The Netherlands. Lien externe
Sadek Ali, R. E. I., & Chaouki, J. (2026). Electromagnetic Interference Shielding for Automotive Applications. Dans John, R. E., Varghese, S. S., Chandran, A., & Unnikrishnan, N. V. (édit.), Electromagnetic Interference Shielding Technologies (p. 111-138). Lien externe
Sadek Ali, R. E. I., Zorainy, M., Carrillo Garcia, A., Dubois, C., Tantawy, H., Sharawi, M. S., & Chaouki, J. (2026). Calcination-free microwave flash synthesis of RGO/BaFe₁₂O₁₉ nanocomposites with preserved conductivity and induced magnetism. Journal of Alloys and Compounds, 1072, 188980 (12 pages). Lien externe
Safaei, M., & Kessler, S. (2026). Plastic Sealing Technologies. Dans Reference Module in Food Science . Lien externe
Safaei, M., Ajji, A., Kessler, S., & Saffar, A. (2026). Controlled sustained release of chlorine dioxide gas from extrusion-cast polymeric films to extend shelf life of strawberries. Applied Food Research, 6(1), 101732. Lien externe
Santos Araque, D. A., Mozaffari, N., Fradette, L., & Kaliaguine, S. (2026). Revisiting the synthesis of dimethyl carbonate from methanol and carbon dioxide. The Canadian Journal of Chemical Engineering, 25 pages. Présentée à Canadian Chemical Engineering Conference (CSChE 2025), Montréal, QC. Lien externe
Seitfudem, G. A., Berger, M., & Boulay, A.-M. (2026). Harnessing model ensembles to assess uncertainty and provide prospective characterization factors for AWARE2.0. The International Journal of Life Cycle Assessment, 31(6). Lien externe
Seitfudem, G. A., Boulay, A.-M., & Berger, M. (2026). Data to "Harnessing model ensembles to assess uncertainty and provide prospective characterization factors for AWARE2.0" [Ensemble de données]. Lien externe
Serafin, B., Henry, O., & De Crescenzo, G. (2026). On the use of glycoengineering methods for the generation of antibodies with enhanced effector functions. Glycobiology. Lien externe
Son Tran, D., Boisvert, C., Vu, N.-N., Nemamcha, H.-E., Legrand, U., & Nguyen-Tri, P. (2026). Phase Engineering of a Tin Oxide-Based Nanostructured Catalyst for Efficient Electrochemical Reduction of CO₂ toward Formate. ACS Applied Nano Materials, 9(21), 9780-9791. Lien externe
Souttre, M., Majeau-Bettez, G., Maréchal, F., & Margni, M. (2026). Eratum : Mescal: a tool for coupling energy system models with life-cycle assessment. Journal of Industrial Ecology, 1 page. Lien externe
Souttre, M., Majeau-Bettez, G., Maréchal, F., & Margni, M. (2026). mescal: a tool for coupling energy system models with life-cycle assessment. Journal of Industrial Ecology, 19 pages. Accès restreint
Sulmoni, E., Moustaine, Z., Liberelle, B., Saleh, W., Kadem, L., Leclerc, G., De Crescenzo, G., Tournoux, F., & Zenses, A.-S. (2026). Mitral chordae tension regulator for simulating various levels of mitral regurgitation in an artificial left heart. Archives of cardiovascular diseases, 119(1), S83-S83. Présentée à 36th European Days of the French Society of Cardiology, Paris, France. Lien externe
Tanguay-Rioux, F., Al Houssaini, K. I., Majeau-Bettez, G., Legros, R., & Spreutels, L. (2026). Can hydrothermal carbonization be used as a mean to increase the circularity of existing food waste anaerobic digestion plants? Waste Management, 221, 11564 (12 pages). Disponible
Theiri, M., Marinova, M., Chadjaâ, H., & Jolicoeur, M. (2026). Development of a co‐culture of Ureibacillus thermosphaericus and Cupriavidus taiwanensis for inhibitors removal from hemicellulose prehydrolysate. Biotechnology Progress, e70107. Lien externe
Tselekouni, P., Mohseni-Garakani, M., Papa, S., Kim, S. Y., Avramoglu, R. K., Wertheimer, M. R., Ajji, A., Lakatos, P. L., & Rosenzweig, D. H. (2026). A 3D Alginate–Gelatin Co-Culture Model to Study Epithelial–Stromal Interactions in the Gut. Gels, 12(1), 70 (18 pages). Lien externe
Vahabzadeh Pasikhani, J., Taha, Y., & Chaouki, J. (2026). Extraction of high-purity magnesium and calcium from phosphate mine waste rocks by a carbon-neutral and circular hydrometallurgy. Canadian Metallurgical Quarterly, 12 pages. Lien externe
Vaillant, M., Oliveira Ferreira, V., Mainville, W., Lamarre, J.-M., Raymond, V., Chioua, M., & Blais, B. (2026). Surrogate model for heat transfer prediction in impinging jet arrays using dynamic inlet/outlet and flow rate control [Ensemble de données]. Lien externe
Vaillant, M., Oliveira Ferreira, V., Mainville, W., Lamarre, J.-M., Raymond, V., Chioua, M., & Blais, B. (2026). Surrogate model for heat transfer prediction in impinging jet arrays using dynamic inlet/outlet and flow rate control. International Communications in Heat and Mass Transfer, 175, 111046 (14 pages). Lien externe
Vatankhah, F., Carrillo Garcia, A., & Chaouki, J. (2026). Carbon Nanotube Growth from Microwave-Assisted Catalytic Pyrolysis of Commodity Polymers: Kinetics and Catalyst Deactivation. Energy & Fuels, 40(16), 9036-9047. Lien externe
Watt, A., Rachella, C., Jaloux, C., Vorstenbosch, J., Hart, A., Tanzer, M., Merle, G., & Barralet, J. (2026). Oxygen and ROS Delivery for Infected Wound Healing and Future Prospects. Advanced Healthcare Materials. Lien externe
Weinold, M. P., & Majeau-Bettez, G. (2026). Critical analysis of the path-exchange method for hybrid life cycle assessment. Journal of Industrial Ecology, 22 pages. Lien externe
Younes, G., Heli, B., & Ajji, A. (2026). Blending Poly(dimethylsiloxane) with Poly(lactic acid) Using Polyhydroxyurethane Additives. ACS Applied Engineering Materials. Lien externe
