Up a level |
Abderrafai, Y. (2022). Fabrication additive de composites à hautes performances mécaniques et thermomécaniques par fabrication de filament fondu : formulation, procédés et caractérisation [Ph.D. thesis, Polytechnique Montréal]. Available
Breumier, S. (2021). Methodology for Shot-Peening Induced Intragranular Residual Stress Prediction [Ph.D. thesis, Polytechnique Montréal]. Available
Bouscarrat, D. (2019). Time-Dependent Damage in Woven-Ply Thermoplastic Composites Above Glass Transition Temperature [Ph.D. thesis, Polytechnique Montréal]. Available
Bag, A. (2019). Effect of Shot Peening on the Axial Fatigue Life of 300M Steel [Ph.D. thesis, Polytechnique Montréal]. Available
Bianchetti, C. (2018). Analytical Fatigue Life Prediction of Shot Peened 7050-T7451 Aluminium Alloy [Ph.D. thesis, École Polytechnique de Montréal]. Available
Benavente Miana, M. (2017). Viscoelastic Distortion During Manufacturing and Post-Curing of Thermoset Composites: Characterization and Modeling [Ph.D. thesis, École Polytechnique de Montréal]. Available
Bourgeois-Collin, L. (2012). Évaluation de modèles biphasiques linéaires pour la caractérisation mécanique de la plaque de croissance [Master's thesis, École Polytechnique de Montréal]. Available
Bouchaar, M. (2011). Conception d'un montage de mircrofabrication pour les nanocomposites à base de résines thermoplastiques [Master's thesis, École Polytechnique de Montréal]. Available
Barello, R. B. (2008). Modélisation de la décohésion de l'interface renfort-matrice dans un matériau composite par la méthode des éléments finis [Master's thesis, École Polytechnique de Montréal]. Available
Chenier, G. (2023). Development of a Non-Planar Slicing Method for Manufacturing of Fused Filament Fabrication Parts with a 6-Axis Robotic System [Master's thesis, Polytechnique Montréal]. Available
Chouchane, K. (2021). Impact of Vibratory Peening on The Surface Integrity of Cemented Steel E16NCD13 [Master's thesis, Polytechnique Montréal]. Available
Courtois, A. (2018). 3D Interlock Composites Multi-Scale Viscoelastic Model Development, Characterization and Modeling [Ph.D. thesis, École Polytechnique de Montréal]. Available
Canals, L. (2018). Preliminary Assessment of the Vibro-Peening Process for Improving the Fatigue Life of Aerospace Components [Master's thesis, École Polytechnique de Montréal]. Available
Courteau-Godmaire, H. (2017). Simulation numérique de la formation des défauts dans la région des inserts de panneaux sandwich [Master's thesis, École Polytechnique de Montréal]. Available
Crochon, T. (2014). Modeling in the Viscoelastic Behavior of Polyimide Matrix at Elevated Temperature [Ph.D. thesis, École Polytechnique de Montréal]. Available
De la Torre, L. (2022). Simulation of the Vibratory Peening Process [Master's thesis, Polytechnique Montréal]. Available
Delorme, R. (2014). Étude de faisabilité de l'insertion d'une membrane élastomère à renfort textile dans l'aspirateur d'une centrale hydroélectrique [Master's thesis, École Polytechnique de Montréal]. Available
Dermanaki Farahani, R. (2011). Three-Dimensional Microstructures of Epoxy-Carbon Nanotube Nanocomposites [Ph.D. thesis, École Polytechnique de Montréal]. Available
El Mourid, A. (2014). Mechanical Behavior of a Triaxially Braided Textile Composite at High Temperature [Ph.D. thesis, École Polytechnique de Montréal]. Available
Faucheux, P. (2019). Simulating Shot Peen Forming with Eigenstrains [Ph.D. thesis, Polytechnique Montréal]. Available
Favre, A. (2013). Caractérisation de l'effet du vieillissement en milieu aqueux sur les propriétés mécaniques de composites à matrice élastomère. [Master's thesis, École Polytechnique de Montréal]. Available
Farah, E. (2009). Modèle constitutif du comportement viscoplastique d'un matériau CFC [Master's thesis, École Polytechnique de Montréal]. Available
Ghossein, E. (2014). Numerical Validation of Analytical Homogenization Models for the Case of Randomly Distributed and Oriented Ellipsoidal Fibers Reinforced Composites [Ph.D. thesis, École Polytechnique de Montréal]. Available
Guérin, N. (2013). Conception et fabrication d'un séparateur de particules hélicoïdal par impression tridimensionnelle [Master's thesis, École Polytechnique de Montréal]. Available
Gariépy, A. (2012). Finite Element Modelling of Shot Peening and Peen Forming Processes and Characterisation of Peened AA2024-T351 Aluminium Alloy [Ph.D. thesis, École Polytechnique de Montréal]. Available
Klotz, T. (2018). Analytical Prediction of Shot Peening Effects on Nickel-Based Superalloy Inconel 718 Fatigue Life [Ph.D. thesis, École Polytechnique de Montréal]. Available
Lampron, O. (2023). Phase-field Modeling of Fracture in Additively Manufactured Thermoplastic parts [Ph.D. thesis, Polytechnique Montréal]. Available
Lingua, A. (2023). Characterization of the multiscale fracture mechanics of short fiber-reinforced composites manufactured by fused filament fabrication [Ph.D. thesis, Polytechnique Montréal]. Available
Langot, J. (2020). Multi-Physics Modeling of Aerospace Composites Exposed to Fire [Ph.D. thesis, Polytechnique Montréal]. Available
Lapalme, M. (2013). Caractérisation des contraintes résiduelles engendrées par l'expansion à froid de trous dans des alliages d'aluminium [Master's thesis, École Polytechnique de Montréal]. Available
Landry, F. (2010). Modeling of the Thermomechanical Behavior of an Epoxy Resin Subjected to Elevated Temperatures and Experimental Verification [Master's thesis, École Polytechnique de Montréal]. Available
Lourdel, N. (2009). Développement d'un banc d'essai pour la détermination des paramètres de la loi de comportement d'un filament d'encre viscoélastique [Master's thesis, École Polytechnique de Montréal]. Available
Moeini Gharagozlo, M. R. (2022). Stiffness Optimization of a honeycomb foot orthotic [Ph.D. thesis, Polytechnique Montréal]. Available
Méndez Romero, J. A. (2016). Experimental and Numerical Study of Needle Peening Effects in Aluminium Alloy 2024-T3 Sheets [Master's thesis, École Polytechnique de Montréal]. Available
Moussaddy, H. (2013). A New Definition of the Representative Volument Element in Numerical Homogenization Problems and its Application to the Performance Evaluation of Analytical Homogenization Models. [Ph.D. thesis, École Polytechnique de Montréal]. Available
Mortazavi, F. (2013). Development of a Global Digital Image Correlation Approach for Fast High-Resolution Displacement Measurements [Ph.D. thesis, École Polytechnique de Montréal]. Available
Miao, H. Y. (2010). Numerical and Theoretical Study of Shot Peening and Stress Peen Forming Process [Ph.D. thesis, École Polytechnique de Montréal]. Available
Pierre, J. M. L. (2023). Fabrication additive de panneaux sandwich multifonctionnels en polymères renforcés résistants à la haute température pour applications aérospatiales [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Pelzmann, T. (2022). Composite Aircraft Engine Fire Walls : a Small-Scale Experimental Testbed to study Thermomechanical Degradation under Fire [Ph.D. thesis, Polytechnique Montréal]. Available
Pahlavan Pour, M. (2013). Multi Scale Modeling of The Elastic Properties of Polymer-Clay Nanocomposites [Ph.D. thesis, École Polytechnique de Montréal]. Available
Rahmani, B. (2014). In-Situ Mechanical Properties Identification of Composite Materials Using Inverse Methods Based on Full-Field Measurements [Ph.D. thesis, École Polytechnique de Montréal]. Available
Rivet, H. (2008). Développement d'une méthodologie d'optimisation des paramètres de grenaillage pour améliorer la vie en fatigue [Master's thesis, École Polytechnique de Montréal]. Available
Sosa-Rey, F. (2023). Modeling of the Thermo-mechanical behavior of Additively Manufactured Thermoplastic Composites by means of full-field Numerical Homogenization [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Santonja Soto, F. (2023). Characterization of Specimens 3D Printed by Fused Filament Fabrication Using Advanced Thermoplastic Composites Developed for Aerospace Applications [Master's thesis, Polytechnique Montréal]. Available
Sushitskii, V. (2022). Non-Euclidean plate theory for the Simulation, Optimization and Automation of shot peen forming [Ph.D. thesis, Polytechnique Montréal]. Available
Singhal, M. (2022). Experimental Investigation of Controlled Single and Multiple Impacts of Shot Peening on Titanium Ti-6A1-4V Alloy, 300M Steel and Aluminium Alloy 7050-T7451 [Master's thesis, Polytechnique Montréal]. Available
Turcot, G. (2022). Development of a Spherical Indentation Inverse Methodology to Estimate Bulk Tensile Properties of Metals for Applications to Welds [Ph.D. thesis, Polytechnique Montréal]. Available
Tabiai, I. (2018). 3D Full Field Displacement and Strain Measurements at the Microscale in Fiber Reinforced Composites Under Transverse Load Using Digital Image Correlation [Ph.D. thesis, École Polytechnique de Montréal]. Available
Trudel, A. (2013). Étude expérimentale de la propagation de fissures de fatigue dans la zone affectée thermiquement de joints soudés de roues de turbines hydrauliques [Master's thesis, École Polytechnique de Montréal]. Available
Vivien, G. (2010). Modélisation d'une vanne à tournant sphérique munie d'un joint de polymère viscoélastique [Master's thesis, École Polytechnique de Montréal]. Available
Yue, L. (2022). A Numerical Predictive Tool for Long-term Properties of Thermoplastics under Complex Operating Conditions [Ph.D. thesis, Polytechnique Montréal]. Available