Items where Research Director is "Ajji, Abdellah"

A

Azizipour, N. (2022). Appraisal of Surface Treatment to Steady Tumor Spheroid Formation On-Chip [Ph.D. thesis, Polytechnique Montréal]. Available

Abdali, H. (2019). Development of Amino Functionalized Graphene Based Polymer Nanofibers for Gas Sensors [Ph.D. thesis, Polytechnique Montréal]. Available

Arkoun, M. (2017). Élaboration de nouveaux biomatériaux antibactériens à base de chitosane par le procédé d'électrofilage [Ph.D. thesis, École Polytechnique de Montréal]. Available

Ardila Gualdron, N. H. (2017). Production of Chitosan Micro and Nanospheres for the Formulation of Antibacterial Food Packaging Materials [Ph.D. thesis, École Polytechnique de Montréal]. Available

Abdali, H. (2014). Development of Antibacterial Structures and Films Using Ground Plants, Extracts/Essential Oils [Master's thesis, École Polytechnique de Montréal]. Available

B

Ben Dhieb, F. (2019). High Barrier Water-Based Polymer/Clay Nanocomposite Coating [Ph.D. thesis, Polytechnique Montréal]. Available

Boutrouka, R. (2014). Développement d'un film à base de polypropylène ayant des propriétés mécaniques et de scellage thermique améliorées [Master's thesis, École Polytechnique de Montréal]. Available

Binan, L. (2013). Fabrication par électrofilage d'une structure à élution de facteurs de croissance pour contrôler la différenciation de cellules souches neuronales en neurones moteurs [Master's thesis, École Polytechnique de Montréal]. Available

D

Darvish, M. (2021). Development of Antimicrobial Films for Food Packaging Using Melt Compounding [Ph.D. thesis, Polytechnique Montréal]. Available

Dimitrievska, S. (2007). Assessment of the biocompatibility of nanostructured polymeric fibers [Master's thesis, École Polytechnique de Montréal]. Available

E

Emami, N. (2021). Development of Alternative Bacteria Sensing Means [Master's thesis, Polytechnique Montréal]. Available

F

Fereydoon, M. (2014). Development of High Barrier Nylon Based Multilayer Films [Ph.D. thesis, École Polytechnique de Montréal]. Available

Fatahi, S. (2006). Correlation between different micro-structural parameters with physical/mechanical properties of polyethylene blown films [Ph.D. thesis, École Polytechnique de Montréal]. Available

G

Guieu, P. (2021). Développement et production d'un contenant alimentaire, recyclable et compostable à base de fibres naturelles [Master's thesis, Polytechnique Montréal]. Available

H

Heli, B. (2017). Bacterial Cellulose Supported Sensor for Bacteria and Gas Detection Development [Ph.D. thesis, École Polytechnique de Montréal]. Available

Haddad, T. (2014). Fabrication and Surface Modification of Poly L-Lactic Acid Nanostructures for Growth Factor Immobilization and Neural Stem Cell Delivery [Master's thesis, École Polytechnique de Montréal]. Available

J

Jahan, N. (2018). Development of the Piezoelectric Properties of Poly(Vinylidene Fluoride) Based Ferroelectrics and Ferroelectrets Using Fillers and Mechanical Stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

K

Kamyabmehr, A. (2023). Development of GRAS Oxygen Scavenging System for Active Film Packaging [Master's thesis, Polytechnique Montréal]. Available

Kennedy-Hoyland, C. (2021). Electrospun Cellulose Acetate and Metal Oxide Composite Membranes for Water Filtration Applications [Master's thesis, Polytechnique Montréal]. Available

Kanani Aghkand, Z. (2021). Effect of Sealant Structure and Sealing Condition on Heat Sealing Performance of Polyethylene Films [Ph.D. thesis, Polytechnique Montréal]. Available

Karimi Alavijeh, D. (2020). Development of Films/Fibrous Nanostructures with Gas and Volatiles Detection Ability [Master's thesis, Polytechnique Montréal]. Available

Kordjazi, Z. (2019). Development of Oxygen Scavenging Polymeric Systems for Food Packaging Applications [Ph.D. thesis, Polytechnique Montréal]. Available

L

Laquerre, J.-É. (2023). Chemical Recycling of Meta-Aramid Fibres Into Nanofiber for Particulate Blocking Firefighter Hood [Master's thesis, Polytechnique Montréal]. Restricted access

Leroy, P. (2023). Échafaudage cellulaire en nanofibres de polymère et verre bioactif pour la guérison des plaies diabétiques [Master's thesis, Polytechnique Montréal]. Restricted access

M

Mohseni Garakani, M. (2022). An Innovative Bio-Engineered 3D Interface Model for the Study of Cancer Metastasis [Ph.D. thesis, Polytechnique Montréal]. Available

Moslehi Alaleh Goorabi, A. (2021). Recycling of Fibreglass Wind Turbine Blades Into Reinforced PLA Composite with Enhanced Mechanical Properties and Toughness [Master's thesis, Polytechnique Montréal]. Available

Mosaferi, Z. (2018). Optimization of the Rate and Level of Porosity Generation in Electrode Films for Application in Batteries [Master's thesis, École Polytechnique de Montréal]. Available

Mohammadi, S. R. (2017). Polyolefin/Clay Nanocomposite Peelable Sealants: Microstructure and Performance [Ph.D. thesis, École Polytechnique de Montréal]. Available

Moayeri, A. (2015). Development of Graphene-Based Polymer Nanocomposites for Electrical Conductors and Supercapacitors [Ph.D. thesis, École Polytechnique de Montréal]. Available

Matet, M. (2014). Préparation de films à base de chitosane par voie fondue [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mazinani, S. (2009). Processing and characterization of conductive carbon nanotube nanocomposite nanofibers and microfibers [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mighri, F. (1998). Influence des propriétés élastiques sur la déformation et rupture de gouttes dans une matrice en écoulement élongationnel et en cisaillement [Ph.D. thesis, École Polytechnique de Montréal]. Available

N

Najarzadeh, Z. (2014). Control and Optimization of Sealing Layer in Films [Ph.D. thesis, École Polytechnique de Montréal]. Available

P

Pakravan Lonbani, M. (2012). Production of Chitosan-Based Non-Woven Membranes Using the Electrospinning Process [Ph.D. thesis, École Polytechnique de Montréal]. Available

R

Rokbani, H. (2018). Élaboration de nouveaux matériaux nanocomposites antibactériens à base de nanoparticules d'oxyde de zinc [Ph.D. thesis, École Polytechnique de Montréal]. Available

Rezaei Kolahchi, A. (2014). Polyethylene Terephthalate (PET) Films Surface Modification Through Blending [Ph.D. thesis, École Polytechnique de Montréal]. Available

S

Stile, G. (2020). Controlled Drug Delivery for Cancer Treatment Using Electrospun Structure [Master's thesis, Polytechnique Montréal]. Available

Salehi Morgani, M. (2020). Enhancing the Visual and Mechanical Properties of Multilayer Films Containing PCR [Master's thesis, Polytechnique Montréal]. Available

Savoji, H. (2016). Innovative Vascular Prostheses Combining 3D Electrospun Nanofiber Matrices and Bioactive Coatings Prepared by Plasma-Polymerization [Ph.D. thesis, École Polytechnique de Montréal]. Available

Saffar, A. (2014). Development of Polypropylene Microporous Hydrophilic Membranes Through Cast Extrusion and Stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

Shahverdi-Shahraki, K. (2014). Development of Pet/Kaolin Nanocomposites with Improved Mechanical Properties [Ph.D. thesis, École Polytechnique de Montréal]. Available

Silverwood, R. (2012). Développement d'un film antibactérien ayant des propriétés de glissement pour une meilleure processabilité [Master's thesis, École Polytechnique de Montréal]. Available

Sadeghi, F. (2006). Development of microporous polypropylene by stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

T

Torres, C. P. (2012). Étude du comportement de cellules endothéliales de l'aorte cultivées sur des fibres électrofilées de PET sous conditions physiologiques de cisaillement [Master's thesis, École Polytechnique de Montréal]. Available

Tabatabaei, S. H. (2009). Development of microporous membranes from PP/HDPE films through cast extrusion and stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

V

Valenti, M. (2012). Study of the Hemocompatibility of Non-Woven Sub-Microfibrous Structures of Polyethylene Terephthalate (PET): Effect of Sub-Microfibres Diameter and Alignment [Master's thesis, École Polytechnique de Montréal]. Available

W

Wang, C. (2022). Development of Ethylene Scavenging Systems Based on Pumice and Potassium Permanganate for Food Packaging Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Wang, L. (2019). Effect of Regrind Content on PP-EVOH Sheets Properties and Effect of Orientation on Permeability of EVOH Multilayer Films [Master's thesis, Polytechnique Montréal]. Available

X

Xu, Y. (2021). Development of Poly(N-isopropylacrylamide) Based Hydrogel Platform and its Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Y

Yousefzadeh Tabasi, R. (2015). Study of Self-Adhesion and Biodegradation of Biodegradable Polymer Films [Ph.D. thesis, École Polytechnique de Montréal]. Available

Z

Zohre Vand, A. (2014). Development of Polymer Nanocomposite Films and their Potential for Photovoltaic Cell Applications [Ph.D. thesis, École Polytechnique de Montréal]. Available