 | Monter d'un niveau |
Alamech, M., Jean, M., DeJesus, D., Buschmann, M. D., & Merzouki, A. (2010). Chitosanase-based method for RNA isolation from cells transfected with chitosan/siRNA nanocomplexes for real-time RT-PCR in gene silencing. International Journal of Nanomedicine, 5, 473-481. Disponible
Azzi, M., Benkahoul, M., Sapieha, J.-E., & Martinu, L. (2010). Corrosion and mechanical properties of duplex-treated 301 stainless steel. Surface and Coatings Technology, 205(5), 1557-1563. Lien externe
Besner, M.-C., Ebacher, G., Jung, B. S., Karney, B., Lavoie, J., Payment, P., & Prévost, M. (2010). Negative pressures in full-scale distribution system: field investigation, modelling, estimation of intrusion volumes and risk for public health. Drinking Water Engineering and Science, 3(2), 101-106. Disponible
Birglen, L. (2010). From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms. Mechanical Sciences, 1(1), 5-12. Disponible
Chazarenc, F., Filiatrault, M., Brisson, J., & Comeau, Y. (2010). Combination of slag, limestone and sedimentary apatite in columns for phosphorus removal from sludge fish farm effluents. Water, 2(3), 500-509. Disponible
Chazarenc, F., Naylor, S., Comeau, Y., Merlin, G., & Brisson, J. (2010). Modeling the effect of plants and peat on evapotranspiration in constructed wetlands. International Journal of Chemical Engineering, 2010, 1-6. Disponible
Corominas, L. L., Rieger, L., Takacs, I., Ekama, G., Hauduc, H., Vanrolleghem, P. A., Oehmen, A., Gernaey, K. V., Van Loosdrecht, M. C. M., & Comeau, Y. (2010). New framework for standardized notation in wastewater treatment modelling. Water Science and Technology, 61(4), 841-857. Disponible
Diamond, M. L., Gandhi, N., Adams, W. J., Atherton, J., Bhavsar, S. P., Bulle, C., Campbell, P. G. C., Dubreuil, A., Fairbrother, A., Farley, K., Green, A., Guinee, J., Hauschild, M. Z., Huijbregts, M. A. J., Humbert, S., Jensen, K. S., Jolliet, O., Margni, M., McGeer, J. C., ... Vijver, M. G. (2010). The clearwater consensus: the estimation of metal hazard in fresh water. International Journal of Life Cycle Assessment, 15(2), 143-147. Disponible
El-Bikai, R., Welman, M., Margaron, Y., Cote, J.-F., MacQueen, L., Buschmann, M. D., Fahmi, H., Shi, Q., Maghni, K., Fernandes, J. C., & Benderdour, M. (2010). Perturbation of adhesion molecule-mediated chondrocyte-matrix interactions by 4-hydroxynonenal binding: implication in osteoarthritis pathogenesis. Arthritis Research and Therapy, 12(5). Disponible
Guruvenket, S., Azzi, M., Li, D., Szpunar, J. A., Martinu, L., & Sapieha, J.-E. (2010). Structural, mechanical, tribological, and corrosion properties of a-SiC:H coatings prepared by PECVD. Surface and Coatings Technology, 204(21-22), 3358-3365. Lien externe
Huszar, P., Cariolle, D., Paoli, R., Halenka, T., Belda, M., Schlager, H., Miksovsky, J., & Pisoft, P. (2010). Modeling the regional impact of ship emissions on NOₓ and ozone levels over the Eastern Atlantic and Western Europe using ship plume parameterization. Atmospheric Chemistry and Physics, 10(14), 6645-6660. Disponible
Kuhn, M., & Napporn, T. (2010). Single-Chamber Solid Oxide Fuel Cell Technology—From Its Origins to Today's State of the Art. Energies, 3(1), 57-134. Disponible
Li, D., Guruvenket, S., Azzi, M., Szpunar, J. A., Sapieha, J.-E., & Martinu, L. (2010). Corrosion and tribo-corrosion behavior of a-SiCₓ:H, a-SiNₓ:H and a-SiCₓNy:H coatings on SS301 substrate. Surface and Coatings Technology, 204(9-10), 1616-1622. Lien externe
Martin, É., Azzi, M., Salishchev, G. A., & Szpunar, J. (2010). Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti-6Al-4V. Tribology International, 43(5-6), 918-924. Lien externe
Paez, A., Mercado, R. G., Farber, S., Morency, C., & Roorda, M. (2010). Accessibility to health care facilities in Montreal Island: an application of relative accessibility indicators from the perspective of senior and non-senior residents. International Journal of Health Geographics, 9. Disponible
Périé-Curnier, D., & Curnier, D. (2010). Effect of pathology type and severity on the distribution of MRI signal intensities within the degenerated nucleus pulposus: application to idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 11(1). Disponible
Thibault, M., Nimesh, S., Lavertu, M., & Buschmann, M. D. (2010). Intracellular Trafficking and Decondensation Kinetics of Chitosan–pDNA Polyplexes. Molecular Therapy, 18(10), 1787-1795. Disponible
Varcheie, P. D. Z., Sills-Lavoie, M., & Bilodeau, G.-A. (2010). A Multiscale Region-Based Motion Detection and Background Subtraction Algorithm. Sensors, 10(2), 1041-1061. Disponible
Ali, N. (2010). Traceability improvement for software miniaturization. (Rapport technique n° EPM-RT-2010-05). Disponible
Ali, N., Wu, W., Antoniol, G., Di Penta, M., Guéhéneuc, Y.-G., & Hayes, J. H. (2010). A novel process and its implementation for the multi-objective miniaturization of software. (Rapport technique n° EPM-RT-2010-04). Disponible
Arnaoudova, V. (2010). Defining linguistic antipatterns towards the improvement of source code quality. (Rapport technique n° EPM-RT-2010-07). Disponible
Bhattacharya, N. (2010). Verification of software-hardware hybrid systems. (Rapport technique n° EPM-RT-2010-10). Disponible
Boughanmi, F. (2010). Change impact analysis of multi-language and heterogeneously-licensed software. (Rapport technique n° EPM-RT-2010-06). Disponible
Eshkevari, L. M. (2010). Restructuring source code identifiers. (Rapport technique n° EPM-RT-2010-11). Disponible
Fadlaoui, K., & Galinier, P. (2010). Covering design problem constructed by using the TS-CD algorithm. (Rapport technique n° EPM-RT-2010-01). Disponible
Guerrouj, L. (2010). Automatic derivation of concepts based on the analysis of identifiers. (Rapport technique n° EPM-RT-2010-09). Disponible
Hassaine, S. (2010). Évolution biologique et applications en génie logiciel. (Rapport technique n° EPM-RT-2010-03). Disponible
Kerzazi, N., & Robillard, P. N. (2010). DSL4SPM: Domain-specific language for software process modeling. (Rapport technique n° EPM-RT-2010-15). Disponible
Kerzazi, N., & Robillard, P. N. (2010). Introducing knowledge concepts in software process modeling. (Rapport technique n° EPM-RT-2010-14). Disponible
Maïga, A. (2010). Détection et correction automatique des défauts de conception au moyen de l'apprentissage automatique pour l'amélioration de la qualité des systèmes. (Rapport technique n° EPM-RT-2010-12). Disponible
Sabane, A. (2010). Améliorer la testabilité et les tests des systèmes à l'aide des patrons. (Rapport technique n° EPM-RT-2010-08). Disponible
Cloutier, G., Sellens, R. W., Hugo, R. J., Camarero, R., & Fortin, C. (juin 2010). Outcomes Assessment and Curriculum Improvement Through the Cyclical Review of Results - A Model to Satisfy CEAB-2009 Accreditation Requirements [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, 2010, Queen's University Kingston, Ontario (6 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible
Fosso Wamba, S., & Michael, K. (octobre 2008). An information systems design theory for an RFID university-based laboratory [Communication écrite]. 4th Biennial Information Systems Foundation Workshop, Canberra, Australia (20 pages). Disponible
Zarrabi, H., Zilic, Z., Savaria, Y., & Al-Khalili, J. A. (2010). On the Efficient Design & Synthesis of Differential Clock Distribution Networks. Dans Wang, Z. (édit.), VLSI (p. 331-352). Disponible
