<  Retour au portail Polytechnique Montréal

Documents dont le centre de recherche est "Non applicable"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Sous-type de document | Aucun groupement
Aller à : A | B | C | D | E | F | G | H | K | L | M | P | S | T | V | Z
Nombre de documents: 33

A

Ali, N. (2010). Traceability improvement for software miniaturization. (Rapport technique n° EPM-RT-2010-05). Disponible

Ali, N., Wu, W., Antoniol, G., Di Penta, M., Guéhéneuc, Y.-G., & Hayes, J. H. (2010). A novel process and its implementation for the multi-objective miniaturization of software. (Rapport technique n° EPM-RT-2010-04). Disponible

Arnaoudova, V. (2010). Defining linguistic antipatterns towards the improvement of source code quality. (Rapport technique n° EPM-RT-2010-07). Disponible

Azzi, M., Benkahoul, M., Sapieha, J.-E., & Martinu, L. (2010). Corrosion and mechanical properties of duplex-treated 301 stainless steel. Surface and Coatings Technology, 205(5), 1557-1563. Lien externe

B

Besner, M.-C., Ebacher, G., Jung, B. S., Karney, B., Lavoie, J., Payment, P., & Prévost, M. (2010). Negative pressures in full-scale distribution system: field investigation, modelling, estimation of intrusion volumes and risk for public health. Drinking Water Engineering and Science, 3(2), 101-106. Disponible

Bhattacharya, N. (2010). Verification of software-hardware hybrid systems. (Rapport technique n° EPM-RT-2010-10). Disponible

Birglen, L. (2010). From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms. Mechanical Sciences, 1(1), 5-12. Disponible

Boughanmi, F. (2010). Change impact analysis of multi-language and heterogeneously-licensed software. (Rapport technique n° EPM-RT-2010-06). Disponible

C

Chazarenc, F., Filiatrault, M., Brisson, J., & Comeau, Y. (2010). Combination of slag, limestone and sedimentary apatite in columns for phosphorus removal from sludge fish farm effluents. Water, 2(3), 500-509. Disponible

Chazarenc, F., Naylor, S., Comeau, Y., Merlin, G., & Brisson, J. (2010). Modeling the effect of plants and peat on evapotranspiration in constructed wetlands. International Journal of Chemical Engineering, 2010, 1-6. Disponible

Cloutier, G., Sellens, R. W., Hugo, R. J., Camarero, R., & Fortin, C. (juin 2010). Outcomes Assessment and Curriculum Improvement Through the Cyclical Review of Results - A Model to Satisfy CEAB-2009 Accreditation Requirements [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, 2010, Queen's University Kingston, Ontario (6 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible

Corominas, L. L., Rieger, L., Takacs, I., Ekama, G., Hauduc, H., Vanrolleghem, P. A., Oehmen, A., Gernaey, K. V., Van Loosdrecht, M. C. M., & Comeau, Y. (2010). New framework for standardized notation in wastewater treatment modelling. Water Science and Technology, 61(4), 841-857. Disponible

D

Diamond, M. L., Gandhi, N., Adams, W. J., Atherton, J., Bhavsar, S. P., Bulle, C., Campbell, P. G. C., Dubreuil, A., Fairbrother, A., Farley, K., Green, A., Guinee, J., Hauschild, M. Z., Huijbregts, M. A. J., Humbert, S., Jensen, K. S., Jolliet, O., Margni, M., McGeer, J. C., ... Vijver, M. G. (2010). The clearwater consensus: the estimation of metal hazard in fresh water. International Journal of Life Cycle Assessment, 15(2), 143-147. Disponible

E

El-Bikai, R., Welman, M., Margaron, Y., Cote, J.-F., MacQueen, L., Buschmann, M. D., Fahmi, H., Shi, Q., Maghni, K., Fernandes, J. C., & Benderdour, M. (2010). Perturbation of adhesion molecule-mediated chondrocyte-matrix interactions by 4-hydroxynonenal binding: implication in osteoarthritis pathogenesis. Arthritis Research and Therapy, 12(5). Disponible

Eshkevari, L. M. (2010). Restructuring source code identifiers. (Rapport technique n° EPM-RT-2010-11). Disponible

F

Fadlaoui, K., & Galinier, P. (2010). Covering design problem constructed by using the TS-CD algorithm. (Rapport technique n° EPM-RT-2010-01). Disponible

Fosso Wamba, S., & Michael, K. (octobre 2008). An information systems design theory for an RFID university-based laboratory [Communication écrite]. 4th Biennial Information Systems Foundation Workshop, Canberra, Australia (20 pages). Disponible

G

Guerrouj, L. (2010). Automatic derivation of concepts based on the analysis of identifiers. (Rapport technique n° EPM-RT-2010-09). Disponible

Guruvenket, S., Azzi, M., Li, D., Szpunar, J. A., Martinu, L., & Sapieha, J.-E. (2010). Structural, mechanical, tribological, and corrosion properties of a-SiC:H coatings prepared by PECVD. Surface and Coatings Technology, 204(21-22), 3358-3365. Lien externe

H

Hassaine, S. (2010). Évolution biologique et applications en génie logiciel. (Rapport technique n° EPM-RT-2010-03). Disponible

Huszar, P., Cariolle, D., Paoli, R., Halenka, T., Belda, M., Schlager, H., Miksovsky, J., & Pisoft, P. (2010). Modeling the regional impact of ship emissions on NOₓ and ozone levels over the Eastern Atlantic and Western Europe using ship plume parameterization. Atmospheric Chemistry and Physics, 10(14), 6645-6660. Disponible

K

Kerzazi, N., & Robillard, P. N. (2010). DSL4SPM: Domain-specific language for software process modeling. (Rapport technique n° EPM-RT-2010-15). Disponible

Kerzazi, N., & Robillard, P. N. (2010). Introducing knowledge concepts in software process modeling. (Rapport technique n° EPM-RT-2010-14). Disponible

Kuhn, M., & Napporn, T. (2010). Single-Chamber Solid Oxide Fuel Cell Technology—From Its Origins to Today's State of the Art. Energies, 3(1), 57-134. Disponible

L

Li, D., Guruvenket, S., Azzi, M., Szpunar, J. A., Sapieha, J.-E., & Martinu, L. (2010). Corrosion and tribo-corrosion behavior of a-SiCₓ:H, a-SiNₓ:H and a-SiCₓNy:H coatings on SS301 substrate. Surface and Coatings Technology, 204(9-10), 1616-1622. Lien externe

M

Maïga, A. (2010). Détection et correction automatique des défauts de conception au moyen de l'apprentissage automatique pour l'amélioration de la qualité des systèmes. (Rapport technique n° EPM-RT-2010-12). Disponible

Martin, É., Azzi, M., Salishchev, G. A., & Szpunar, J. (2010). Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti-6Al-4V. Tribology International, 43(5-6), 918-924. Lien externe

P

Paez, A., Mercado, R. G., Farber, S., Morency, C., & Roorda, M. (2010). Accessibility to health care facilities in Montreal Island: an application of relative accessibility indicators from the perspective of senior and non-senior residents. International Journal of Health Geographics, 9. Disponible

Périé-Curnier, D., & Curnier, D. (2010). Effect of pathology type and severity on the distribution of MRI signal intensities within the degenerated nucleus pulposus: application to idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 11(1). Disponible

S

Sabane, A. (2010). Améliorer la testabilité et les tests des systèmes à l'aide des patrons. (Rapport technique n° EPM-RT-2010-08). Disponible

T

Thibault, M., Nimesh, S., Lavertu, M., & Buschmann, M. D. (2010). Intracellular Trafficking and Decondensation Kinetics of Chitosan–pDNA Polyplexes. Molecular Therapy, 18(10), 1787-1795. Disponible

V

Varcheie, P. D. Z., Sills-Lavoie, M., & Bilodeau, G.-A. (2010). A Multiscale Region-Based Motion Detection and Background Subtraction Algorithm. Sensors, 10(2), 1041-1061. Disponible

Z

Zarrabi, H., Zilic, Z., Savaria, Y., & Al-Khalili, J. A. (2010). On the Efficient Design & Synthesis of Differential Clock Distribution Networks. Dans Wang, Z. (édit.), VLSI (331-352). Disponible

Liste produite: Fri Apr 26 05:07:01 2024 EDT.