 | Monter d'un niveau |
Assaf, B., Sobotka, V., & Trochu, F. (2017). Measurement of the in-plane thermal conductivity of long fiber composites by inverse analysis. Open Journal of Composite Materials, 7(2), 85-99. Disponible
Aissiou, M., Périé-Curnier, D., Gervais, J., & Trochu, F. (2013). Development of a progressive dual kriging technique for 2D and 3D multi-parametric MRI data interpolation. Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 1(2), 69-78. Lien externe
Arbter, A., Beraud, J. M., Binetry, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., Endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Lomov, S. V., Long, A., Michaud, V., Morren, G., ... Ziegmann, G. (juillet 2010). Experimental determination of the permeability of textiles : a benchmark exercises [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Achim, V., Soukane, S., Gauvin, R., & Trochu, F. (août 2006). Optimization of liquid composite molding based on a mold coefficient concept [Communication écrite]. 6th Canada-Japan Workshop on Composites, Toronto, Canada. Non disponible
Assaf, B., Menge, H., Sobotka, V., & Trochu, F. (2005). Development of a characterization mold to measure the transverse thermal conductivity of a composite material by inverse analysis. Journal of Reinforced Plastics and Composites, 24(17), 1837-1854. Lien externe
Achim, V., Ruiz, E., Soukane, S., & Trochu, F. (novembre 2003). Optimization of flow rate in resin transfer molding (RTM) [Communication écrite]. 8th Japan International SAMPE Symposium and Exhibition, Tokyo, Japan. Non disponible
Andre, B., Trochu, F., & Dansereau, J. (1996). Approach for the smoothing of three-dimensional reconstructions of the human spine using dual Kriging interpolation. Medical & Biological Engineering & Computing, 34(3), 185-191. Lien externe
Belot, I., Sun, Y., Vidal, D., Votsmeier, M., Causse, P., Trochu, F., & Bertrand, F. (2021). A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters. Chemical Engineering Journal, 405, 18 pages. Lien externe
Bonnard, B., Causse, P., & Trochu, F. (2017). Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials. Journal of Composite Materials, 51(27), 3807-3818. Lien externe
Bensadoun, F., Kchit, N., Billotte, C., Trochu, F., & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, 406087. Disponible
Bensadoun, F., Billotte, C., Kchit, N., Bickerton, S., Trochu, F., & Ruiz, E. (septembre 2011). Development, characterization and manufacturing of nanocomposites and bionanocomposites for transportation industry [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F., & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011, 1-10. Disponible
Bensadoun, F., Kchit, N., Ruiz, E., & Trochu, F. (juillet 2010). Fabrication and mechanical properties of nanocomposites fabricated by rein infusion with bioresin and natural fibers [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible
Bechet, E., Ruiz, E., Trochu, F., & Cuilliere, J. C. (2004). Re-Meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding. Journal of Reinforced Plastics and Composites, 23(1), 17-36. Lien externe
Bechet, E., Ruiz, E., Trochu, F., & Cuilliere, J. C. (2003). Adaptive Mesh Generation for Mould Filling Problems in Resin Transfer Moulding. Composites Part A: Applied Science and Manufacturing, 34(9), 813-834. Lien externe
Breard, J., Henzel, Y., Trochu, F., & Gauvin, R. (2003). Analysis of Dynamic Flows Through Porous Media. Part I: Comparison Between Saturated and Unsaturated Flows in Fibrous Reinforcements. Polymer Composites, 24(3), 391-408. Lien externe
Breard, J., Henzel, Y., Trochu, F., & Gauvin, R. (2003). Analysis of Dynamic Flows Through Porous Media. Part II: Deformation of a Double-Scale Fibrous Reinforcement. Polymer Composites, 24(3), 409-421. Lien externe
Brailovski, V., Clement, E., Terriault, P., & Trochu, F. (2003). Influence of Stress Concentration on the Recovery Stress Generation. Journal de physique. IV, 112, 231-234. Lien externe
Bechet, E., Cuilliere, J.-C., & Trochu, F. (2002). Génération d'un maillage pour éléments finis à partir de fichiers de stéréolithographie (STL) : une interface indépendante des formats CAO : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 9-37. Lien externe
Bechet, E., Cuilliere, J. C., & Trochu, F. (2002). Generation of a Finite Element Mesh From Stereolithography (Stl) Files. Computer Aided Design, 34(1), 1-17. Lien externe
Brailovski, V., Terriault, P., & Trochu, F. (2002). Thermal snap switch. (Demande de brevet no CA2314955). Lien externe
Béchet, E., Ruiz, E., & Trochu, F. (août 2001). Remeshing algorithms applied to resin transfer moulding simulations [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe
Breard, J., Henzel, Y., Trochu, F., Cadinot, S., Saouab, A., & Bouquet, G. (juillet 1999). Viscoelasticity model for deformable reinforcement material in liquid composite moulding [Communication écrite]. 5th International Conference on Flow Processes in Composite Materials (FPCM 1999), Plymouth, UK. Lien externe
Breard, J., Remacle, J.-F., Pham, X.-T., & Trochu, F. Effect of the pressure boundary condition on mold filling simulations in liquid composite molding [Communication écrite]. 6th International Conference on Computer Methods in Composite Materials (CADCOMP 1998), Montréal, Québec. Non disponible
Balazinski, M., Gravelle, S., & Trochu, F. (janvier 1998). Évaluation de la distance entre les passes d'usinage pour les outils à bout torique [Communication écrite]. 2e conférence internationale sur la conception et la fabrication intégrées en mécanique (IDMME 1998), Compiègne, France. Non disponible
Brailovski, V., & Trochu, F. (1996). Review of shape-memory alloys medical applications in russia. Bio-Medical Materials and Engineering, 6(4), 291-298. Lien externe
Brailovski, V., Trochu, F., & Daigneault, G. (1996). Temporal characteristics of shape memory linear actuators and their application to circuit breakers. Materials and Design, 17(3), 151-158. Lien externe
Boime, B., Guittard, D., Ferland, P., Trochu, F., & Gauvin, R. (mai 1995). Mold filling simulation of the resin transfer molding process for complex three-dimensional ribbed parts [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible
Balazinski, M., Gravelle, S., & Trochu, F. (août 1994). Automatic process planning using a fuzzy logic expert system [Communication écrite]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada. Non disponible
Causse, P., Ravey, C., & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2). Disponible
Causse, P., Ruiz, E., & Trochu, F. (2013). Influence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection. International Journal of Material Forming, 6(3), 341-362. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). Processing warpage of asymmetric composite panels manufactured by resin transfer molding [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (août 2011). Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection [Communication écrite]. 18th International Conference on Composite Materials, Jeju Island, Korea. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (2011). Experimental study of flexible injection to manufacture parts of strong curvature. Polymer Composites, 32(6), 892-895. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (septembre 2011). Fabrication of curved parts by flexible injection : influence of processing conditions on composite quality and analysis of distortion [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Experimental analysis of flexible injection for curved composite parts [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Thermoelastic spring-in of curved composite parts manufactured by flexible injection [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible
Cloutier, F., & Trochu, F. (juillet 2008). Analysis of multiple zone heating in resin transfer molding [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (juillet 2008). Consolidation of curved composite parts manufactured by flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Chatel, S., Ruiz, E., Trochu, F., & Bréard, J. (juillet 2008). A permeability measurement method dedicated to a composite process family [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (octobre 2007). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Communication écrite]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie. Non disponible
Croteau-Labouly, B., Achim, V., Ruiz, E., & Trochu, F. (août 2007). Combined characterization of permeability and compaction in porous media during vacuum assisted resin infusion [Communication écrite]. 6th Canadian International Composites Conference (CANCOM 2007), Winnipeg, Canada. Non disponible
Charlebois, K. M., Boukhili, R., Zebdi, O., Trochu, F., & Gasmi, A. (2005). Evaluation of the physical and mechanical properties of braided fabrics and their composites. Journal of Reinforced Plastics and Composites, 24(14), 1539-1554. Lien externe
Carrier, J., Aubin, C.-É., Trochu, F., & Labelle, H. (2005). Optimization of rib surgery parameters for the correction of scoliotic deformities using approximation models. Journal of Biomechanical Engineering, 127(4), 680-691. Lien externe
Crampon, M. A., Brailovski, V., Sawan, M., & Trochu, F. (2002). Nerve cuff electrode with shape memory alloy armature: design and fabrication. Bio-Medical Materials and Engineering, 12(4), 397-410. Lien externe
Crampon, M.-A., Sawan, M., Brailovski, V., & Trochu, F. (1999). New Easy to Install Nerve Cuff Electrode Using Shape Memory Alloy Armature. Artificial Organs, 23(5), 392-395. Lien externe
Crampon, M.-A., Brailovski, V., & Sawan, M. (août 1999). NiTi electrode for neural stimulation [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Crampon, M.-A., Sawan, M., Brailovski, V., & Trochu, F. (octobre 1998). New nerve cuff electrode based on a shape memory alloy armature [Communication écrite]. 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 1998), Hong Kong, China. Lien externe
Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A dimensionless characteristic number for process selection and mold design in composites manufacturing : part I — theory. Journal of Composites Science, 4(1), 11 (16 pages). Disponible
Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A Dimensionless Characteristic Number for Process Selection and Mold Design in Composites Manufacturing: Part II-Applications. Journal of Composites Science, 4(1), 10 (17 pages). Lien externe
Di Fratta, C., Koutsoukis, G., Klunker, F., Trochu, F., & Ermanni, P. (2016). Characterization of anisotropic permeability from flow front angle measurements. Polymer Composites, 37(7), 2037-2052. Lien externe
Di Fratta, C., Klunker, F., Trochu, F., & Ermanni, P. (2015). Characterization of textile permeability as a function of fiber volume content with a single unidirectional injection experiment. Composites Part A: Applied Science and Manufacturing, 77, 238-247. Lien externe
Di Fratta, C., Trochu, F., & Ermanni, P. (juillet 2015). Improved anisotropic permeability characterization in unidirectional injections based on flow front angle measurements [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
Demaria, C., Ruiz, E., Trochu, F., Dambrine, B., & Godon, T. (mai 2010). Fabrication by resin transfer molding of a turbine blade reinforced by three-dimensional woven fabrics : Process simulation and optimization [Communication écrite]. Society for the Advancement of Material and Process Engineering's Spring Conference and Exhibition, Seattle, Washington. Non disponible
Demaria, C., Ruiz, E., & Trochu, F. (juillet 2008). In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Daqoune, T., Ruiz, E., & Trochu, F. (juillet 2008). Study of the shape of the compaction chamber in flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part I: Experimental Results. Polymer Composites, 28(6), 797-811. Lien externe
Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part II: Prediction Model and Numerical Simulations. Polymer Composites, 28(6), 812-827. Lien externe
De Santis, S., Trochu, F., & Ostiguy, G. L. (2001). Stress-strain hysteresis and damping in mncu and niti alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 32(10), 2489-2498. Lien externe
Diallo, M. L., Gauvin, R., & Trochu, F. (1998). Experimental Analysis and Simulation of Flow Through Multi- Layer Fiber Reinforcements in Liquid Composite Molding. Polymer Composites, 19(3), 246-256. Lien externe
Diallo, M. L., Gauvin, R., & Trochu, F. (juillet 1997). Key factors affecting the permeability measurement in continuous fiber reinforcements [Communication écrite]. 11th International Conference on Composite Materials, Gold Coast, Australia. Lien externe
De Santis, S., Trochu, F., Ostiguy, G. L., Sol, H., & Berthelot, J. M. (1997). Material and structural characterization of the dynamic behavior of shape memory alloy reinforced composites. Journal of Composite Materials, 31(19), 1985-1998. Lien externe
De Santis, S., Trochu, F., Ostiguy, G. L., Sol, H., & DeVisscher, J. (mai 1995). Dynamic characterization of composites with embedded shape memory alloys: Some experimental results [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Diallo, M. L., Gauvin, R., & Trochu, F. (septembre 1995). Experimental analysis of flow through multi-layer fiber reinforcements in liquid composite molding [Communication écrite]. 4th International Conference on Automated Composites (ICAC 1995), Nottingham. Non disponible
El Samrout, A., Braydi, O., Younes, R., Trochu, F., & Lafon, P. (2019). A New Hybrid Method to Solve the Multi-objective Optimization Problem for a Composite Hat-Stiffened Panel. Dans Bioinspired heuristics for optimization (Vol. 774, 77-88). Lien externe
El Samrout, A., Braydi, O., Younes, R., Trochu, F., & Lafon, P. (octobre 2016). A new hybrid method to solve the multi-objective optimization problem for a composite hat-stiffened panel [Communication écrite]. 6th International Conference on Metaheuristics and Nature Inspired Computing (META 2016), Marrakech, Morocco. Lien externe
Ermanni, P., Di Fratta, C., & Trochu, F. (2012). Molding: Liquid Composite Molding (LCM). Dans Wiley Encyclopedia of Composites (10 pages). Lien externe
Echaabi, J., & Trochu, F. (1997). Failure mode dependent strength criteria for composite laminates. Journal of Reinforced Plastics and Composites, 16(10), 926-945. Lien externe
Echaabi, J., Trochu, F., & Gauvin, R. (1996). Review of failure criteria of fibrous composite materials. Polymer Composites, 17(6), 786-798. Lien externe
Echaabi, J., & Trochu, F. (1996). Methodology to derive the implicit equation of failure criteria for fibrous composite laminates. Journal of Composite Materials, 30(10), 1088-1114. Lien externe
Echaabi, J., Trochu, F., Pham, X. T., & Ouellet, M. (1996). Theoretical and experimental investigation of failure and damage progression of graphite-epoxy composites in flexural bending test. Journal of Reinforced Plastics and Composites, 15(7), 740-755. Lien externe
Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). Development of strength failure criteria for fibrous composite laminates [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible
Echaabi, J., Trochu, F., Ratle, A., & Gauvin, R. (août 1995). Failure modes and damage progression of a quasi-isotropic graphite-epoxy composite in flexural bending test [Communication écrite]. 10th international conference on composite materials, Vancouver, BC, CAN. Lien externe
Echaabi, J., Trochu, F., & Gauvin, R. (1995). A general strength theory for composite materials based on dual kriging interpolation. Journal of Reinforced Plastics and Composites, 14(3), 211-232. Lien externe
Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). A methodology to derive failure criteria for composite laminates [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Feuvrier, J., Soukane, S., & Trochu, F. (juin 2007). Three-dimensional analysis of mold insulation in resin transfer molding [Communication écrite]. 19th Canadian Materials Science Conference, Hamilton, Canada. Non disponible
Ferland, P., Guittard, D., & Trochu, F. (1996). Concurrent methods for permeability measurement in resin transfer molding. Polymer Composites, 17(1), 149-158. Lien externe
Ferland, P., Trochu, F., Gauvin, R., Guittard, D., & Boime, B. (mai 1995). Rate of conversion, temperature variation and flow simulation of reactive liquid during rtm and srim mold filling [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573. Lien externe
Gascon, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming, 9(2), 229-239. Lien externe
Gascon, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2015). Numerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding. Composites Part A: Applied Science and Manufacturing, 77, 275-284. Lien externe
Gutiérrez, J., Ruiz, E., & Trochu, F. (2013). Exploring the behavior of glass fiber reinforcements under vibration-assisted compaction. Journal of the Textile Institute, 104(9), 980-993. Lien externe
Gutierrez, J., Ruiz, E., & Trochu, F. (2013). High-frequency vibrations on the compaction of dry fibrous reinforcements. Advanced Composite Materials, 22(1), 13-27. Lien externe
García, J. A., Gascon, L., Ruiz, E., Lebel, F., & Trochu, F. (juillet 2012). Simulation and experimental validation of the saturation in LCM processes [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Lien externe
Gutierrez, J., Trochu, F., & Ruiz, E. (septembre 2011). Effects of high frequency vibrations on the compressibility of dry fibrous reinforcements [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Gascon, L., Garcia, J. A., Chinesta, F., Ruiz, E., & Trochu, F. (juillet 2010). Analysis of the saturation in liquid composite molding processes using an essentially non-oscillatory (eno) technique [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland (5 pages). Lien externe
García, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (2010). An efficient solver of the saturation equation in liquid composite molding processes. International Journal of Material Forming, 3(2), 1295-1302. Lien externe
Garcia, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (juin 2009). An approach to simulate the saturation in RTM/VARI process [Communication écrite]. 3rd Manufacturing Engineering Society International Conference, Alcoy, Spain. Non disponible
Gravier, V., Trochu, F., Aubin, C.-É., Plouznikoff, A., & Ozell, B. (septembre 2002). Interpolation by Dual Kriging of a Moving Flow Front and Conservation of the Fluid Mass [Communication écrite]. 4th Canada-Japan Workshop on Composites, Vancouver, BC, Canada. Lien externe
Gordon, S., Boukhili, R., & Trochu, F. (août 2001). Effect of additives on the surface aspects of RTM moulded composites [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe
Gauvin, R., & Trochu, F. (1998). Key Issues in Numerical Simulation for Liquid Composite Molding Processes. Polymer Composites, 19(3), 233-240. Lien externe
Gauvin, R., Lebrun, G., & Trochu, F. (octobre 1996). Étude de la température de la résine durant le remplissage d'un moule chauffé pour les procèdés d'injection sur renforts [Communication écrite]. 10es Journées nationales sur les composites, Paris, FRA. Non disponible
Gauvin, R., & Trochu, F. (juin 1996). Key issues in numerical simulation of liquid composites molding processes [Communication écrite]. 29th ISATA Conference, Florence, Italy. Non disponible
Gauvin, R., Trochu, F., Lemenn, Y., & Diallo, L. (1996). Permeability measurement and flow simulation through fiber reinforcement. Polymer Composites, 17(1), 34-42. Lien externe
Gillet, Y., Meunier, M. A., Brailovski, V., Trochu, F., Patoor, E., & Berveiller, M. (août 1995). Comparison of thermomechanical models for shape memory alloy springs [Communication écrite]. 8th International Conference on Martensitic Transformations (ICOMAT-8). Publié dans Journal de physique. IV, 5(8, pt. 2). Lien externe
Gauvin, R., Pomerleau, É., Trochu, F., & Lours, T. (mai 1995). Damping and impact properties of shape memory alloy reinforced composites [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Gao, D. M., Trochu, F., & Gauvin, R. (1995). Heat transfer analysis of non-isothermal resin transfer molding by the finite element method. Materials and Manufacturing Processes, 10(1), 57-64. Lien externe
Huang, W., Yan, W., Xu, R., Huang, Q., Yang, J., Trochu, F., & Hu, H. (2021). Wrinkling analysis of circular membranes by a Fourier based reduced model. Thin-Walled Structures, 161, 17 pages. Lien externe
Huang, W., Causse, P., Hu, H., & Trochu, F. (2020). Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins. Polymer Composites, 41(4), 1341-1355. Lien externe
Huang, W., Causse, P., Hu, H., Belouettar, S., & Trochu, F. (2020). Transverse compaction of 2D glass woven fabrics based on material twins Part I: Geometric analysis. Composite Structures, 237, 10 pages. Lien externe
Huang, W., Causse, P., Hu, H., Belouettar, S., & Trochu, F. (2020). Transverse compaction of 2D glass woven fabrics based on material twins Part II: Tow and fabric deformations. Composite Structures, 237, 8 pages. Lien externe
Huang, W., Huang, Q., Liu, Y., Yang, J., Hu, H., Trochu, F., & Causse, P. (2019). A Fourier based reduced model for wrinkling analysis of circular membranes. Computer Methods in Applied Mechanics and Engineering, 345, 1114-1137. Lien externe
Huang, W., Causse, P., Brailovski, V., Hu, H., & Trochu, F. (2019). Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling. Composites Part A: Applied Science and Manufacturing, 124, 20 pages. Lien externe
Hubert, P., Haider, M., Lessard, L., Ruiz, E., & Trochu, F. (mars 2006). Integrated Approach for Class A Surface Finish of Automotive Components Manufactured by RTM [Communication écrite]. 27th International SAMPE Europe Conference, Paris, France. Non disponible
Hammami, A., Gauvin, R., Trochu, F., Touret, O., & Ferland, P. (août 1995). Analysis of the Edge Effect on Flow Patterns in Liquid Composites Molding [Communication écrite]. 10th International Conference on Composite Materials, Vancouver, BC. Publié dans Applied Composite Materials, 5(3). Lien externe
Hammami, A., Gauvin, R., & Trochu, F. (1998). Modeling the Edge Effect in Liquid Composites Molding. Composites Part A: Applied Science and Manufacturing, 29(5-6), 603-609. Lien externe
Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (1996). Directional permeability measurement of deformed reinforcement. Journal of Reinforced Plastics and Composites, 15(6), 552-562. Lien externe
Hammami, A., Trochu, F., Gauvin, R., & Bakalemian, P. Y. Predictive models for the edge effect in liquid composite molding [Communication écrite]. 1st International Conference on Composite Science and Technology (ICCST 1996), Durban, South Africa. Non disponible
Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (mai 1995). Directional permeability measurement of deformed reinforcement [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Irhirane, E. H., Echaabi, J., Aboussaleh, M., Hattabi, M., & Trochu, F. (2009). Matrix and fibre stiffness degradation of a Quasi-isotrope graphite epoxy laminate under flexural bending test. Journal of Reinforced Plastics and Composites, 28(2), 201-223. Lien externe
Joubaud, L., Trochu, F., & Le Corvec, J. (2005). Analysis of Resin Flow Under Flexible Cover in Vacuum Assisted Resin Infusion (VARI). Journal of Advanced Materials, 37(3), 3-10. Lien externe
Joubaud, L., Achim, V., & Trochu, F. (2005). Numerical simulation of resin infusion and reinforcement consolidation under flexible cover. Polymer Composites, 26(4), 417-427. Lien externe
Joubaud, L., Trochu, F., & Le Corvec, J. (septembre 2002). Numerical Simulation of Resin Flow Under Flexible Cover in Vacuum Assisted Resin Infusion [Communication écrite]. 4th Canada-Japan Workshop on Composites, Vancouver, B.C.. Lien externe
Karaki, M., Younes, R., Trochu, F., & Lafon, P. (2019). Progress in experimental and theoretical evaluation methods for textile permeability. Journal of Composites Science, 3(3), 28 pages. Disponible
Karaki, M., Hallal, A., Younes, R., Trochu, F., Lafon, P., Hayek, A., Kobeissy, A., & Fayad, A. (2017). A comparative analytical, numerical and experimental analysis of the microscopic permeability of fiber bundles in composite materials. International Journal of Composite Materials, 7(3), 82-102. Lien externe
Karaki, M., Hallal, A., Younes, R., Trochu, F., & Lafon, P. (2017). In-plane permeability prediction model for non-crimp and 3D orthogonal fabrics. Journal of the Textile Institute, 109(8), 1110-1126. Lien externe
Kchit, N., Bensadoun, F., Billotte, C., Ruiz, E., & Trochu, F. (juillet 2010). Nano-clay composites made by liquid molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible
Kchit, N., Bensadoun, F., Carrozani, T., Billotte, C., Ruiz, E., Sol, H., & Trochu, F. (juillet 2010). A study of nano-claycomposites made by liquid composite molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Kamanayo, G., Trochu, F., & Sanschagrin, B. (1994). Prediction of shrinkage by dual kriging for injection-molded polypropylene plaques. Advances in Polymer Technology, 13(4), 305-314. Lien externe
LeBel, F., Ruiz, E., & Trochu, F. (2017). Experimental study of saturation by visible light transmission in dual-scale fibrous reinforcements during composite manufacturing. Journal of Reinforced Plastics and Composites, 36(23), 1693-1711. Lien externe
LeBel, F., Ruiz, E., & Trochu, F. (2017). Void content analysis and processing issues to minimize defects in liquid composite molding. Polymer Composites, 40(1), 109-120. Lien externe
LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2014). Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements. International Journal of Material Forming, 7(1), 93-116. Lien externe
LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2013). Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics. Textile Research Journal, 83(15), 1634-1659. Lien externe
Lebel, F., Fanaei, A., Ruiz, E., & Trochu, F. (2012). Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open Journal of Inorganic Non-Metallic Materials, 2(3), 25-45. Lien externe
Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Characterization of capillary effects in dual-scale fibrous reinforcements [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible
Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Development of a capillary characterization setup for dual-scale analysis of fiber wetting [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible
Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (septembre 2009). Experimental investigation of dual-scale reinforcement imbibition [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware. Non disponible
Lebel, F., Trochu, F., & Ruiz, E. (juillet 2008). Thermosetting matrix composite characterization and cure control via a scale model mould [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Landry, A., Brailovski, V., & Trochu, F. (août 1999). Modélisation d'un actuateur AMF à action rapide [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Limaiem, A., & Trochu, F. (1995). Geometric algorithms for the intersection of curves and surfaces. Computers & Graphics, 19(3), 391-403. Lien externe
Monticeli, F. M., Almeida, J. H. S., Neves, R. M., Ornaghi, H. L., & Trochu, F. (2022). The influence of fabric architecture on impregnation behavior and void formation: Artificial neural network and statistical-based analysis. Polymer Composites, 43(5), 2812-2823. Lien externe
Madra, A., Van-Pham, D.-T., Nguyen, M.-T., Nguyen, C.-N., Breitkopf, P., & Trochu, F. (2020). Automated identification of defect morphology and spatial distribution in woven composites. Journal of Composites Science, 4(4), 178 (17 pages). Disponible
Madra, A., Causse, P., Trochu, F., Adrien, J., Maire, E., & Breitkopf, P. (2019). Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans. Composite Structures, 224, 11 pages. Lien externe
Madra, A., Breitkopf, P., Raghavan, B., & Trochu, F. (2018). Diffuse manifold learning of the geometry of woven reinforcements in composites. Comptes Rendus Mécanique, 346(7), 532-538. Lien externe
Madra, A., Breitkopf, P., & Trochu, F. (août 2017). Automatic detection and classification of defects in woven composites manufactured by RTM based on X-ray microtomography [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Non disponible
Madra, A., Adrien, J., Breitkopf, P., Maire, E., & Trochu, F. (2017). A clustering method for analysis of morphology of short natural fibers in composites based on X-ray microtomography. Composites Part A: Applied Science and Manufacturing, 102, 184-195. Lien externe
Madra, A., Breitkopf, P., Rassineux, A., & Trochu, F. (2017). Image-based model reconstruction and meshing of woven reinforcements in composites. International Journal for Numerical Methods in Engineering, 112(9), 1235-1252. Lien externe
Madra, A., Trochu, F., & Breitkopf, P. (mai 2017). Implicit kriging model of fibrous reinforcements in composites based on X-ray microtomography [Communication écrite]. 13e Colloque national en calcul des structures (CSMA 2017), Giens, France (5 pages). Non disponible
Madra, A., Trochu, F., & Breitkopf, P. (juin 2016). An optimized model of dual-scale geometry of textile reinforcement based on X-ray microtomography for modeling of RTM processes [Communication écrite]. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016), Crete Island, Greece. Lien externe
Makarenkov, D. Y., Brailovski, V., & Trochu, F. (2003). Calculation of Shape Recovery in Textured Sm Material. Journal de physique. IV, 112, 239-244. Lien externe
Menge, H., Trochu, F., Millischer, A., & Sobotka, V. (septembre 2002). An Experimental Device and an Inverse Method to Determine the Thermal Conductivity of a Fiber Reinforced Composite as a Function of Temperature and State of Cure [Communication écrite]. 4th Canada-Japan Workshop on Composites, Vancouver, B.C.. Lien externe
Mayer, J. R. R., Mir, Y. A., Trochu, F., Vafaeesefat, A., & Balazinski, M. (1997). Touch probe radius compensation for coordinate measurement using kriging interpolation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211(B1), 11-18. Lien externe
Mamat, A., Trochu, F., & Sanschagrin, B. (1995). Analysis of shrinkage by dual kriging for filled and unfilled polypropylene molded parts. Polymer Engineering and Science, 35(19), 1511-1520. Lien externe
Mayer, J. R. R., Mir, Y. A., Balazinski, M., Trochu, F., & Vafaeesefat, A. (janvier 1995). Modeling of sculptured surfaces from touch probe measurements [Communication écrite]. 2nd International Conference on the Concurrent Engineering, Potomac. Non disponible
Mamat, A., Trochu, F., & Sanschagrin, B. (mai 1994). Shrinkage analysis of injection molded polypropylene parts [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Octeau, M.-A., Cloutier, F., Feuvrier, J., Soukane, S., & Trochu, F. (juillet 2008). Numerical simulation of mould filling and thermal behavior in the manufacturing of an aeronautical composite part [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, V., Trochu, F., Turenne, S., & Turilina, V. Y. (2004). Thermomechanical treatments and their influence on the microstructure and stress/strain diagrams of NiTi shape memory alloys. Canadian Metallurgical Quarterly, 43(1), 95-108. Lien externe
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, V., Trochu, F., Turenne, S., Turilina, V. Y., & Inaekyan, K. E. (juin 2002). Comparative study of structure and strain diagram changes in Ti-Ni alloys thermomechanically treated in martensitic or austenitic states [Communication écrite]. International Conference on Martensitic Transformations (ICOMAT 2002), Espoo, Finland. Publié dans Journal de physique. IV, 112. Lien externe
Prokoshkin, S. D., Khmelevskaya, I. Y., Braïlovski, V., Trochu, F., & Turilina, V. Y. (2001). Structure Features, Phase Content and Strain Diagram Parameters of Ti-Ni Shape Memory Alloys After Ltmt and Post-Deformation Heating. Metallofizika I Noveishie Tekhnologii, 23, 26-32. Non disponible
Prokoshkin, S. D., Turenne, S., Khmelevskaya, I. Y., Brailovski, V., & Trochu, F. (2000). Structural Mechanisms of High-Temperature Shape Changes in Titanium-Nickel Alloys After Low-Temperature Thermomechanical Treatment. Canadian Metallurgical Quarterly, 39(2), 225-233. Lien externe
Phan, A.-V., & Trochu, F. (1998). Application of Dual Kriging to Structural Shape Optimization Based on the Boundary Contour Method. Archive of Applied Mechanics, 68(7-8), 539-551. Lien externe
Pham, X.-T., Trochu, F., Remade, J.-F., & Gauvin, R. Simulation of compression resin transfer molding [Communication écrite]. 6th International Conference on Computer Methods in Composite Materials (CADCOMP 1998), Montréal, Québec. Non disponible
Piedboeuf, M. C., Gauvin, R., & Trochu, F. (juin 1996). Hysteretic behavior of NiTi shape memory alloy as a function of deformation, temperature, and rate of deformation [Communication écrite]. 3rd International Conference on Intelligent Materials and 3rd European Conference on Smart Structures and Materials, Lyon, Fr. Lien externe
Ravey, C., Ruiz, E., & Trochu, F. (2014). Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography. Composites Science and Technology, 99, 96-102. Lien externe
Ravey, C., Ruiz, E., & Trochu, F. (juillet 2013). Determination of the optimal injection velocity in resin transfer molding by infrared thermography [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Renaud, J., Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). A study of consolidation equilibrium in composites made by flexible injection [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Ravey, C., Lebel, F., Ruiz, E., Courteau-Godmaire, H., & Trochu, F. (juillet 2013). Void minimization and optimization of injection velocity in RTM processing [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Ruiz, E., Lebel, F., & Trochu, F. (juillet 2012). Experimental study of capillary flows, voids formation and void migration in LCM Manufacturing [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Lien externe
Ruiz, E., & Trochu, F. (2011). Flow modeling in compoiste reinforcements. Dans Boisse, P. (édit.), Research and Markets: Composite Reinforcements for Optimum Performance (588-615). Lien externe
Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (avril 2010). Advanced process simulation of resin transfer molding and application to fan blades for an aircraft engine [Communication écrite]. Forum des Journées européennes des composites, Paris, France. Non disponible
Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (juillet 2010). Simulation of resin transfer molding processing of a composite fan blade for an aircraft engine [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible
Ratle, F., Achim, V., & Trochu, F. (2009). Evolutionary operators for optimal gate location in liquid composite moulding. Applied Soft Computing, 9(2), 817-823. Lien externe
Ruiz, E., Briones, L., Allard, E., & Trochu, F. (juillet 2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part I : Experimental investigation [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Ruiz, E., Achim, V., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: isothermal flow. Science and Engineering of Composite Materials, 14(2), 85-112. Disponible
Ruiz, E., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: non-isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144. Disponible
Ruiz, E., Achim, V., Breard, J., Chatel, S., & Trochu, F. (juillet 2006). A fast numerical approach to reduce void formation in liquid composite molding [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe
Ruiz, E., Waffo, F., Owens, J., Billotte, C., & Trochu, F. (juillet 2006). Modeling of Resin Cure Kinetics for mOlding Cycle Optimization [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe
Ruiz, E., & Trochu, F. (2006). Multi-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time. Composites Part A: Applied Science and Manufacturing, 37(6), 913-924. Lien externe
Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (2006). Optimization of Injection Flow Rate to Minimize Micro/Macro-Voids Formation in Resin Transfer Molded Composites. Composites Science and Technology, 66(3-4), 475-486. Lien externe
Ruiz, E., Chatel, S., & Trochu, F. (juillet 2006). A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe
Ruiz, E., & Trochu, F. (2005). Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses. Polymer Composites, 26(2), 209-230. Lien externe
Ruiz, E., & Trochu, F. (2005). Manufacture of composites by a flexible injection process using a double or multiple cavity mold. (Demande de brevet no WO2005000566). Lien externe
Ruiz, E., & Trochu, F. (2005). Numerical Analysis of Cure Temperature and Internal Stresses in Thin and Thick Rtm Parts. Composites Part A: Applied Science and Manufacturing, 36(6), 806-826. Lien externe
Ruiz, E., Demaria, C. F., & Trochu, F. (2005). PolyPer, a freeware package for preform permeability characterisation. JEC Composites (17), 70-72. Non disponible
Ruiz, E., Achim, V., Trochu, F., & Breard, J. (août 2005). Reduction of void formation in LCM a practical numerical approach [Communication écrite]. Canada composites International Conference, Vancouver, Canada. Non disponible
Ruiz, E., & Trochu, F. (2005). Thermomechanical Properties During Cure of Glass-Polyester Rtm Composites: Elastic and Viscoelastic Modeling. Journal of Composite Materials, 39(10), 881-916. Lien externe
Ruiz, E., & Trochu, F. (septembre 2004). Approximation of resin flow in liquid composite molding using a new non-conforming three-dimensional finite element [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan. Non disponible
Ruiz, E., Trochu, F., & Gauvin, R. (2004). Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM. Advanced Composites Letters, 13(1), 49-57. Lien externe
Ruiz, E., & Trochu, F. (juillet 2004). Multi-criteria thermal optimization by evolutionary algorithms of resin cure, processing stresses and cycle time in liquid composite molding [Communication écrite]. International Conference on Flow Processes in Composite Materials, Delaware, USA. Lien externe
Ratle, F., Lecarpentier, B., Labib, R., & Trochu, F. (septembre 2004). Multi-objective optimization of a composite material spring design using an evolutionary algorithm [Communication écrite]. 8th International Conference on Parallel Problem Solving from Nature (PPSN 2004), Birmingham, UK. Lien externe
Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (décembre 2004). Numerical optimization of injection flow rate in RTM to minimize micro/macro voids formation [Communication écrite]. Journées Scientifiques et Techniques "Mise en forme des matériaux composites", Le Havre, France. Non disponible
Ruiz, E., Achim, V., Soukane, S., & Trochu, F. (2004). Numerical simulation of liquid composite molding. JEC Composites (8), 147-149. Non disponible
Ruiz, E., Gauvin, R., & Trochu, F. (septembre 2004). Processing stresses and thermal optimization in resin transfer molding [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan. Non disponible
Ruiz, E., & Trochu, F. (2003). State of the art revue of numerical simulation of liquid composite molding processes. Recent Research Developments in Materials Science & Engineering (2), 217-244. Non disponible
Ruiz, E., Trochu, F., & Gauvin, R. (novembre 2003). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 5th International Symposium on Advanced Composites, Corfu, Greece. Non disponible
Ruiz, E., & Trochu, F. (août 2001). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe
Ruiz, E., & Trochu, F. (décembre 2001). Thermal residual stress during the curing of composite parts manufactured by RTM [Communication écrite]. International Conference on Science and Technology of Composite Materials, Mar de Plata, Argentine. Non disponible
Remacle, J.-F., Breard, J., & Trochu, F. (juillet 1999). Numerical simulation of mold filling for three-dimensional composite parts [Communication écrite]. 5th International Conference on Flow Processes in Composite Materials (FPCM 1999), Plymouth, UK. Lien externe
Remacle, J.-F., Breard, J., & Trochu, F. Natural way to simulate flow driven injections in liquid composite molding [Communication écrite]. 6th International Conference on Computer Methods in Composite Materials (CADCOMP 1998), Montréal, Québec. Non disponible
Sun, Y., Causse, P., & Trochu, F. (2022). Closure to "Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method" by Yixun Sun, Philippe Causse, Brahim Benmokrane, and Francois Trochu. Journal of Engineering Mechanics, 148(3), 07022002 (2 pages). Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. Lien externe
Sun, Y., Causse, P., Benmokrane, B., & Trochu, F. (2020). Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method. Journal of Engineering Mechanics, 146(9), 11 pages. Lien externe
Soukane, S., & Trochu, F. (2006). Application of the level set method to the simulation of resin transfer molding. Composites Science and Technology, 66(7-8), 1067-1080. Lien externe
Soukane, S., & Trochu, F. (2005). New Remeshing Applications in Resin Transfer Molding. Journal of Reinforced Plastics and Composites, 24(15), 1629-1653. Lien externe
Soukane, S., Ruiz, E., & Trochu, F. (2005). A novel approach to reduce calculation time during simulations of resin transfer molding. Revue Européenne des Éléments Finis, 14(6-7), 819-840. Lien externe
Shojaei, A., Trochu, F., Ghaffarian, S. R., Karimian, S. M. H., & Lessard, L. (2004). An Experimental Study of Saturated and Unsaturated Permeabilities in Resin Transfer Molding Based on Unidirectional Flow Measurements. Journal of Reinforced Plastics and Composites, 23(14), 1515-1536. Lien externe
Sacépé, N., Turenne, S., & Brailovski, V. (août 1999). Combined analysis of the assisted two-way shape memory effect in NiTi. [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Trochu, F., Yang, B., Wang, J., Béguin, C., & Causse, P. (juin 2022). Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Trochu, F., Vernet, N., Sun, Y., Echaabi, J., Makradi, A., & Belouettar, S. (2022). Hybrid twin models of fiber compaction for composite manufacturing based on dual kriging. International Journal of Material Forming, 15(3), 20 pages. Lien externe
Trochu, F., & Causse, P. (mai 2018). Combined characterization of pose size distribution and permeability in fibrous textiles by capillary flow porometry [Communication écrite]. 14th International Conference on Flow Processes in Composite Materials, Kulturens Hus in Luleå, Sweden. Non disponible
Trochu, F., Chatel, S., Maison - Le Poëc, S., Benoit, Y., De Luca, P., Baisch, P., Roger, D., & Guerin, P. (octobre 2011). Skills synergy leading to RTM flow simulation success story [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2011), Toulouse, France. Lien externe
Trochu, F., Demaria, C., Ruiz, E., Dambrine, B., & Gordon, T. (septembre 2009). RTM process simulation and optimization of composite fan blades reinforced by 3D woven fabrics [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware. Non disponible
Trochu, F., Soukane, S., & Touraine, B. (juillet 2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part II : Numerical model [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (2006). Advanced numerical simulation of liquid composite molding for process analysis and optimization. Composites Part A: Applied Science and Manufacturing, 37(6 SPEC ISS), 890-902. Lien externe
Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (juillet 2004). New approaches to accelerate calculations and improve accuracy of numerical simulations in liquid composite molding [Communication écrite]. International Conference on Flow Processes in Composite Materials, Delaware, USA. Lien externe
Trochu, F. (2003). Constitutive relations. Dans Shape memory alloys: fundamentals, modeling and applications (549-634). Non disponible
Trochu, F., & Turenne, S. (2003). Fatigue and degradation. Dans Shape memory alloys: fundamentals, modeling and applications (311-342). Non disponible
Trochu, F. (2003). Historical summary. Dans Shape memory alloys: fundamentals, modeling and applications (3-8). Non disponible
Trochu, F. (2003). Thermodynamics of thermoelastic martensitic transformation. Dans Shape memory alloys: fundamentals, modeling and applications (9-84). Non disponible
Trochu, F., Remade, J.-F., Bréard, J., Bénoit, Y., & Ruiz, E. (octobre 2000). Three dimensional resin transfer molding simulations : Control of the accuracy and industrial validation for complex ribbed parts [Communication écrite]. 3rd Joint Canada-Japan Workshop on Composites Design and Manufacturing, Kyoto, Japan. Lien externe
Trochu, F., & Terriault, P. (août 1999). Application of dual kriging to the phenomenological modeling of shape memory alloys [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Trochu, F., Sacépé, N., Volkov, O., & Turenne, S. (1999). Characterization of NiTi Shape Memory Alloys Using Dual Kriging Interpolation. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 275, 395-399. Lien externe
Thierry, B., Tabrizian, M., Yahia, L., & Savadogo, O. (août 1999). Effect of sterilization processes on the ions release of NiTi alloy [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Terriault, P., & Trochu, F. (août 1999). Finite element simulation of three-dimensional shape memory devices [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Trochu, F. (août 1999). Shape memory alloys: fundamentals, modelling and industrial applications: proceedings of the international symposium [Communication écrite]. International Symposium on Shape Memory Alloys. Non disponible
Trochu, F., & Pham, X.-T. (1999). Simulation of compression resin transfer molding to manufacture thin composite shells. Polymer Composites, 20(3), 436-459. Lien externe
Terriault, P., Trochu, F., & Brailovski, V. (juin 1998). Tensorial generalization of a phenomenological material law for shape memory alloys [Communication écrite]. International workshop on nondestructive testing and computer simulations in science and engineering, St. Petersburg, RUS. Lien externe
Trochu, F., Ziegmann, G., & Hintermann, M. (mars 1998). INTELligent MANufacturing of structural parts by liquid composite moulding (LCM): Project INTELMAN [Communication écrite]. Regional Technical Conference, Rosemont, IL, USA. Non disponible
Trochu, F., & Terriault, P. (1998). Nonlinear Modelling of Hysteretic Material Laws by Dual Kriging and Application. Computer Methods in Applied Mechanics and Engineering, 151(3-4), 545-558. Lien externe
Trochu, F., Pham, X.-T., & Gauvin, R. (1998). Simulation of compression resin transfer molding with displacement control. Journal of Reinforced Plastics and Composites, 17(17), 1525-1556. Lien externe
Trochu, F. (1997). Les alliages à mémoire de forme et leurs applications industrielles. (Rapport technique n° EPM-RT-97-22). Accès restreint
Terriault, P., Meunier, M.-A., & Trochu, F. (1997). Application of dual kriging to the construction of a general phenomenological material law for shape memory alloys. Journal of Intelligent Material Systems and Structures, 8(7), 605-618. Lien externe
Trochu, F., Brailovski, V., Terriault, P., & Volkov, A. (1997). Compression d'un manchon connecteur à l'aide d'éléments actifs en alliage à mémoire de forme. (Rapport technique n° P1968). Non disponible
Trochu, F., Ferland, P., & Gauvin, R. (1997). Functional requirements of a simulation software for liquid molding processes. Science and Engineering of Composite Materials, 6(4), 209-218. Disponible
Trochu, F. (1997). An introduction to shape memory alloys and their industrial applications. (Rapport technique n° EPM-RT-97-27). Accès restreint
Trochu, F., Brailovski, V., Vachon, N., & Terriault, P. (1997). Introduction to shape memory aloys and their industrial applications. (Rapport technique n° EPM-RT-97-27). Non disponible
Trochu, F., & Qian, Y.-Y. (1997). Nonlinear finite element simulation of superelastic shape memory alloy parts. Computers and Structures, 62(5), 799-810. Lien externe
Trochu, F., Brailovskii, V., Yaoyan, K., Terriault, P., & Meunier, M. (1996). Computer modeling of parts and devices with shape memory. Technical physics, 41(11), 1186-1188. Non disponible
Trochu, F., Brailovskii, V., Quian, Y.-Y., Terriault, P., & Meunier, M.-A. (1996). Computer modeling of parts and devices with the memory shape. Zhurnal Tekhnicheskoi Fiziki, 66(11), 186-189. Non disponible
Trochu, F., Meunier, M.-A., & Charbonnier, P. (1996). Modeling of thermomechanical fatigue behavior in shape memory alloy using dual kriging. Materials and Design, 17(3), 133-139. Lien externe
Trochu, F., Qian, Y.-Y., & Terriault, P. (août 1996). Numerical analysis on shape memory alloys for industrial applications [Communication écrite]. Processes in advanced materials and mechanics : International conference on advanced materials, Beijing, China. Non disponible
Trochu, F., Hammami, A., & Benoit, Y. (1996). Prediction of fibre orientation and net shape definition of complex composite parts. Composites Part A: Applied Science and Manufacturing, 27(4), 319-328. Lien externe
Trochu, F., Abong, Y., Balazinski, M., & Larbrisseau, P. (1996). Rough machining of free-form surfaces defined by dual kriging. International Journal of Production Research, 34(6), 1603-1623. Lien externe
Trochu, F., Brailovski, V., & Terriault, P. (1996). Shape memory alloys : fundamentals and modeling. (Rapport technique n° EPM-RT-97-01). Accès restreint
Trochu, F., Brailovski, V., Meunier, M. A., Terriault, P., & Qian, Y. Y. (1996). Thermomechanical analysis of shape memory devices. Bio-Medical Materials and Engineering, 6(6), 389-403. Lien externe
Trochu, F., Boudreault, J.-F., Gao, D. M., & Gauvin, R. (1995). Three-dimensional flow simulations for the resin transfer molding process. Materials and Manufacturing Processes, 10(1), 21-26. Lien externe
Trochu, F., Gauvin, R., Gao, D. M., & Boudreault, J.-F. (1994). RTMFLOT - an integrated software environment for the computer simulation of the resin transfer molding process. Journal of Reinforced Plastics and Composites, 13(3), 262-270. Lien externe
Trochu, F., & Gauvin, R. (1992). Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process. Journal of Reinforced Plastics and Composites, 11(7), 772-786. Lien externe
Trochu, F., & Gauvin, R. (1991). Simulation du remplissage de moules 2D par différences finies curvilignes. (Rapport technique n° EPM-RT-91-08). Accès restreint
Vernet, N., & Trochu, F. (2016). Analysis and modeling of 3D interlock fabric compaction behavior. Composites Part A: Applied Science and Manufacturing, 80, 182-193. Lien externe
Vernet, N., & Trochu, F. (2016). Analysis of mesoscopic pore size in 3D-interlock fabrics and validation of a predictive permeability model. Journal of Reinforced Plastics and Composites, 35(6), 471-486. Lien externe
Vernet, N., & Trochu, F. (2015). In-plane and through-thickness permeability models for three-dimensional Interlock fabrics. Journal of Composite Materials, 50(14), 1951-1969. Lien externe
Vernet, N., Ruiz, E., Advani, S., Alms, J. B., Aubert, M., Barburski, M., Barari, B., Beraud, J. M., Berg, D. C., Correia, N., Danzi, M., Delavière, T., Dickert, M., Di Fratta, C., Endruweit, A., Ermanni, P., Francucci, G., Garcia, J. A., George, A., ... Ziegmann, G. (2014). Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing, 61, 172-184. Lien externe
Vernet, N., & Trochu, F. (juillet 2013). Analysis and modeling of 3D interlock fabric compaction behavior [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Vernet, N., & Trochu, F. (juillet 2013). Permeability analytical modeling of 3D interlock fabrics [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Volkov, O., Brailovski, V., & Trochu, F. (août 1999). Coupled thermomechanical model for shape memory alloys [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Xuan-Tan, P., & Trochu, F. (2000). Analysis of the consolidation in flexible bladder process for thin composite parts by finite element method. Journal of Reinforced Plastics and Composites, 19(3), 182-218. Lien externe
Yang, B., Wang, J., Causse, P., Béguin, C., & Trochu, F. (juillet 2023). On the Meso-structure Spatial Variability Characterizing and Geometric Modelling of Textile-Based Composite via Volume Imaging [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Non disponible
Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages). Lien externe
Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. Lien externe
Yong, A. X. H., Aktas, A., May, D., Endruweit, A., Lomov, S. V., Advani, S., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allaoui, S., Allen, T., Berg, D. C., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S., ... Wang, J. H. (2021). Experimental characterisation of textile compaction response: A benchmark exercise. Composites Part A: Applied Science and Manufacturing, 142, 16 pages. Lien externe
Yong, A. X. H., Aktas, A., May, D., Endruweit, A., Advani, S., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Caglar, H., Causse, P., Chiminelli, A., ... Willenbacher, B. (2021). Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise. Composites Part A: Applied Science and Manufacturing, 148, 16 pages. Lien externe
Yahia, L., Lombardi, S., Piron, D.-L., & Okuyama, M. (août 1999). Corrosion protection of nickel-titanium shape memory alloy for implants [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Zebdi, O., Boukhili, R., & Trochu, F. (2009). An inverse approach based on laminate theory to calculate the mechanical properties of braided composites. Journal of Reinforced Plastics and Composites, 28(23), 2911-2930. Lien externe
Zebdi, O., Boukhili, R., & Trochu, F. (2009). Optimum design of a composite helical spring by multi-criteria optimization. Journal of Reinforced Plastics and Composites, 28(14), 1713-1732. Lien externe
