 | Monter d'un niveau |
Ajao, O., Marinova, M., Savadogo, O., & Paris, J. (2018). Hemicellulose based integrated forest biorefineries: Implementation strategies. Industrial Crops and Products, 126, 250-260. Lien externe
Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part I: Development of new key performance indicators (KPI). Chemical Engineering Research and Design, 115, 160-172. Lien externe
Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part II: Diagnostics and identification of improvement projects. Chemical Engineering Research and Design, 115, 107-115. Lien externe
Ajao, O., Marinova, M., Savadogo, O., & Paris, J. (2014). Process for cost and energy efficient production of furfural from Kraft hardwood pre-hydrolysate. Journal of Bioprocess Engineering and Biorefinery, 3(4), 296-307. Lien externe
Ajao, O., Rafione, T., Marinova, M., Legros, R., Fradette, L., & Paris, J. (octobre 2012). Opportunities for energy upgrading by means of an absoption heat pump in an integrated forest biorefinery [Communication écrite]. 4th Nordic Wood Biorefinery Conference, Helsinki, Finlande. Non disponible
Alao, H., Taoussi, A., Trépanier, M., Beaudry, C., & Paris, J. (février 2007). Rural district heating supplied by a Kraft pulp mill: preliminary feasibility study [Communication écrite]. 93rd Annual Meeting of the Pulp and Paper Technical Association of Canada. Non disponible
Asselman, T., & Paris, J. (1998). Fermeture des circuits d'eau de procédé dans une usine integrée de fabrication de papier journal : recyclage des effluents du procédé et du biotraitement. ATIP. Association technique de l'industrie papetière, 52(1), 34-40. Non disponible
Asselman, T., Sorin, M., & Paris, J. (septembre 1995). Efficacité des techniques de regénération d'eau pour une usine de fabrication de papier integrée sans effluent. Analyse exergétique [Communication écrite]. Journées européennes de thermodynamique contemporaine (JETC), Nancy, France. Publié dans Revue générale de thermique, 35(418-419). Lien externe
Asselman, T., Paris, J., Braker, J., Blackburn, N., & Marino, S. (janvier 1995). Distribution of dissolved solids in the pulp & white water networks of integrated newsprint mills [Communication écrite]. 81st Annual Meeting on Technical Section Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2011). A model for analysis and design of H2O-LiBr absorption heat pumps. Energy Conversion and Management, 52(2), 1439-1448. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2010). Opportunities for the integration of absorption heat pumps in the pulp and paper process. Energy, 35(12), 4600-4606. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2010). Retrofit of Absorption Heat Pumps Into Manufacturing Processes: Implementation Guidelines. Canadian Journal of Chemical Engineering, 88(5), 839-848. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (mai 2010). Simulation et étude expérimentale d'une pompe à chaleur à absorption de type LiBr-H₂O [Communication écrite]. Congrès français de thermique, Touquet. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (août 2009). Application of absorption heat pumps in the pulp and paper industry [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Irlande. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (août 2009). Opportunities for the integration of absorption heat pumps in the pulp and paper process [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Ireland. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (mai 2009). Une méthodologie systématique d'implantation de pompes à chaleur à absorption dans les procédés : Études de cas [Communication écrite]. IXe Colloque Interuniversitaire Franco-québécois sur la thermique des systèmes, Lille, France. Non disponible
Bednar, F., De Oliveira, M. H., Paris, J., & De Ven, T. (2008). Transient Entanglements and Clusters in Dilute Polymer Solutions. Journal of polymer science. Part B, Polymer physics, 46(3), 253-262. Lien externe
Bakhtiari, B., Mateos, E., Legros, R., & Paris, J. (février 2007). Integration of an absorption heat pump in the kraft pulping process: feasibility study [Communication écrite]. 93rd Annual Meeting Preprints-Book A. Non disponible
Bakhtiari, B., Barapour, K., Legros, R., & Paris, J. (mai 2007). Utilisation des pompes à chaleur à absorption dans l'industrie des procédés : revue de la situation [Communication écrite]. VIIIième Colloque Interuniversitaire Franco-Québecois, Montréal, Québec. Non disponible
Brown, D., Maréchal, F., Heyen, G., & Paris, J. (mai 2005). Application of multi-objective optimisation to process measurement system design [Communication écrite]. European Symposium on Computer-Aided Process Engineering (ESCAPE 15), Barcelona, Spain. Publié dans Computer Aided Chemical Engineering, 20. Lien externe
Brown, D., Maréchal, F., Heyen, G., & Paris, J. Application of multi-objective optimisation to process measurements system design [Communication écrite]. ESCAPE 15, Barcelona. Non disponible
Brown, D., Marechal, F., & Paris, J. (2005). A Dual Representation for Targeting Process Retrofit, Application to a Pulp and Paper Process. Applied Thermal Engineering, 25(7), 1067-1082. Lien externe
Brown, D., Marechal, F., Heyen, G., & Paris, J. (2004). Data Reconciliation and Sampling Protocol Design, Case of a Paper Deinking Process. Paperi Ja Puu-Paper and Timber, 86(8), 565-570. Non disponible
Brown, D., Marechal, F., & Paris, J. (janvier 2004). Mass integration of a Deinking mill [Communication écrite]. 90th Annual Meeting Preprints A, Montréal, Québec. Non disponible
Bednar, F., de Oliveira, M. H., van de Ven, T. G. M., & Paris, J. (janvier 2004). Monitoring of poly(ethylene oxide) entanglement [Communication écrite]. 90th Annual Meeting Preprints A, Montréal, Québec. Non disponible
Bednar, F., Perin-Levasseur, Z., Van De Ven, T. G. M., & Paris, J. (2004). Polyethylene Oxide Disentanglement. Journal of Pulp and Paper Science, 30(2), 49-52. Non disponible
Bednar, F., Abdallah, M., Périn-Levasseur, Z., van de Ven, T. G. M., & Paris, J. (janvier 2002). Détermination expérimentale de l'état d'enchevêtrement de l'oxyde de polyethylene en solution [Communication écrite]. Congrès francophone du papier, Québec. Non disponible
Bonhivers, J. C., Perrier, M., & Paris, J. (2002). Management of broke recirculation in an integrated paper mill. Pulp & Paper Canada, 103(2), 44-49. Non disponible
Bonhivers, J. C., Perrier, M., & Paris, J. (2002). Model Predictive Control for Integrated Management of Whitewater Tanks. Tappi Journal, 1(9), 15-21. Lien externe
Bonhivers, J.-C., Perrier, M., & Paris, J. (mai 2000). Management of broke recirculation in an integrated paper mill [Communication écrite]. Control Systems 2000. Quantifying the Benefits of Process Control, Victoria, BC, Canada. Non disponible
Banu, D., Feldman, D., Haghighat, F., Paris, J., & Hawes, D. (1998). Energy-Storing Wallboard: Flammability Tests. Journal of Materials in Civil Engineering, 10(2), 98-105. Lien externe
Braker, J., Pepin, M., Carrière, M., & Paris, J. Closing the water circuit in an integrated newsprint mill; technical and economic case study [Communication écrite]. Preprints : Summer 1996 : technical conference of the Canadian pulp and paper association. Non disponible
Broderick, G., Paris, J., & Valade, J. L. (1996). Fiber development in chemimechanical pulp refining. Tappi Journal, 79(4), 193-201. Lien externe
Broderick, G., Valade, J. L., & Paris, J. (1996). The impact of high-yield pulping pretreatment conditions on spent liquor toxicity and oxygen-demand. Paperi Ja Puu-Paper and Timber, 78(1-2), 43-50. Non disponible
Broderick, G., Paris, J., Valade, J. L., & Wood, J. (1996). Linking the fiber characteristics and handsheet properties of a high-yield pulp. Tappi Journal, 79(1), 161-169. Lien externe
Broderick, G., Paris, J., Valade, J., & Wood, J. (1995). Applying latent vector analysis to pulp&paper characterisation. Paperi ja Puu - Paper and Timber, 77(6-7), 410-408. Non disponible
Broderick, G., Paris, J., & Valade, J. L. (1995). A composite representation of pulp quality. Chemometrics and Intelligent Laboratory Systems, 29(1), 19-28. Lien externe
Benali, T., Daroux, M., & Paris, J. (janvier 1995). Exergy analysis of an ammonia synthesis process based on an ASPEN PLUS simulation model [Communication écrite]. ITEC'95, Agadir. Non disponible
Broderick, G., Paris, J., & Valada, J. L. (1995). Factors affecting the optimal performance of a high-yield pulping operation. Canadian Journal of Chemical Engineering, 73(3), 391-399. Lien externe
Broderick, G., Paris, J., & Valade, J. L. (novembre 1994). Fiber development in chemimechanical pulp refining [Communication écrite]. 1994 Pulping Conference. Non disponible
Broderick, G., Paris, J., & Valade, J. L. (février 1994). Monitoring composite pulp quality [Communication écrite]. 80th annual meeting of the Canadian pulp and paper association. Non disponible
Chen, J., Adjalle, K., Lai, T. T., Barnabe, S., Perrier, M., & Paris, J. (2020). Effect of Mechanical Pretreatment for Enzymatic Hydrolysis of Woody Residues, Corn Stover and Alfalfa. Waste and Biomass Valorization, 11(11), 5847-5856. Lien externe
Chen, J., Adjallé, K., Barnabé, S., Perrier, M., & Paris, J. (2019). Mechanical and thermal pretreatment processes for increasing sugar production from woody biomass via enzymatic hydrolysis. Waste and Biomass Valorization, 10(7), 2057-2065. Lien externe
Cloutier, J.-N., Paris, J., Savadogo, O., Perrier, M., Labrecque, R., & Champagne, P. (2018). Electrolytic Processing of Kraft Black Liquor- Mass Transfer Investigation. ECS Meeting Abstracts, MA2018-01(20), 1271-1271. Lien externe
Cloutier, J.-N., Savadogo, O., Paris, J., Perrier, M., Labrecque, R., Kandev, N., & Champagne, P. (octobre 2017). Effect of the basic electrochemical cell operating parameters on the performance of the electrolysis of Kraft pulping black liquor [Communication écrite]. 232nd ECS Fall Meeting, National Harbor, MD. Publié dans Electrochemical Society Transactions, 80(10). Lien externe
Cloutier, J.-N., Paris, J., Savadogo, O., Perrier, M., Labrecque, R., & Champagne, P. (octobre 2017). Investigation on the Performance of Electrolytic Processing of Kraft Pulping Black Liquor [Résumé]. 232nd ECS Meeting, National Harbor, MD. Publié dans ECS Meeting Abstracts, MA2017-02(22). Lien externe
Chegini, S., Marinova, M., Chadjaa, H., Jolicoeur, M., & Paris, J. (octobre 2012). Butanol production from hemicelluloses hydrolysates [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Colombie-Britannique. Non disponible
Cakembergh-Mas, A., Paris, J., & Trépanier, M. (2010). Strategic simulation of the energy management in a Kraft mill. Energy Conversion and Management, 51(5), 988-997. Lien externe
Costa, A., Bakhtiari, B., Schuster, S., & Paris, J. (juillet 2006). Integration of absorption heat pumps in a Kraft pulp process for enhanced energy efficiency [Communication écrite]. 6th World Energy System Conference (WESC 2006), Turin, Italie. Publié dans Energy, 34(3). Lien externe
Costa, A., Paris, J., Towers, M., & Browne, T. (2007). Economics of Trigeneration in a Kraft Pulp Mill for Enhanced Energy Efficiency and Reduced GHG Emissions. Energy, 32(4), 474-481. Lien externe
Cadotte, M., Tellier, M. E., Blanco, A., Fuente, E., Van De Ven, T. G. M., & Paris, J. (2007). Flocculation, Retention and Drainage in Papermaking: a Comparative Study of Polymeric Additives. Canadian Journal of Chemical Engineering, 85(2), 240-248. Lien externe
Costa, A., Paris, J., Towers, M., & Browne, T. Economics of Trigeneration in a Pulp Mill for Enhanced Energy Efficiency and Reduced Ghg Emissions [Communication écrite]. Procceedings of Ecos 2005, Vols 1-3 - Shaping Our Future Energy Systems. Non disponible
Cadotte, M., Telller, M.-E., Blanco, A., Van De Ven, T., & Paris, J. (février 2005). Effects of various retention AIDS on fiber flocculation, filler RETENTION and drainage [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Costa, A., Neuhann, V., Vaillancourt, N. J., & Paris, J. (janvier 2004). Applications of absorption heat pumps in the pulp and paper industry for increased efficiency and reduction of greenhouse gas emissions [Communication écrite]. 90th Annual Meeting Preprints B, Montréal, Québec. Non disponible
Chahbani, M. H., Labidi, J., & Paris, J. (2004). Modeling of Adsorption Heat Pumps With Heat Regeneration. Applied Thermal Engineering, 24(2-3), 431-447. Lien externe
Chahbani, M. H., Labidi, J., & Paris, J. (2002). Effect of Mass Transfer Kinetics on the Performance of Adsorptive Heat Pump Systems. Applied Thermal Engineering, 22(1), 23-40. Lien externe
Cabos, L., Berrada, M., & Paris, J. (2000). Effect of furnish composition on the color of a fine three-ply paperboard. Tappi Journal, 83(10), 1-16. Lien externe
Carreau, P., Paris, J., & Guérin, P. (1994). Heat transfer to newtonian and non-newtonian liquids in a screw agitator and draft coil system. Canadian Journal of Chemical Engineering, 72(6), 966-974. Lien externe
Donat, V., Van De Ven, T. G. M., & Paris, J. (2003). Distribution of Dissolved and Colloidal Substances in the Forming and Press Sections of a Paper Machine. Journal of Pulp and Paper Science, 29(9), 294-298. Non disponible
Deutsch, B., & Paris, J. (janvier 2000). Mélanges de lois exponentielles et régression PLS pour l'analyse des casses de la feuille dans une machine à papier [Communication écrite]. Actes des 32e journées de statistiques, Fez. Non disponible
Donat, V., Paris, J., & Van De Ven, T. G. M. (2000). Simulation of a Paper Machine Twin-Wire Forming Section. Journal of Pulp and Paper Science, 26(8), 284-288. Non disponible
Donat, V., Vaillancourt, J., Samkocwa, D., van de Ven, T., Ruiz, J., & Paris, J. (janvier 1999). Modélisation du drainage et de la rétention dans une machine à papier [Communication écrite]. 27e EUCEPA conf, Grenoble. Non disponible
Donat, V., Paris, J., & van de Ven, T. (1999). Simulation of a twin-wire paper machine. Process Control News (for the Pulp and Paper Industries), 19(4), 2-2. Non disponible
Eilers, H., Marinova, M., Jemaa, N., & Paris, J. (mai 2010). Production de furfural à partir d'hydrolysats d'hémicellulose [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Faucher, G., Godin, A., Jalbert, G., O'Shea, J., & Paris, J. (1984). Les travaux pratiques de laboratoire dans I'enseignement de I'ingénierie: comment en sont-ils venus ou ils en sont? European Journal of Engineering Education, 8(4), 345-356. Lien externe
Goortani, B. M., Mateos-Espejel, E., & Paris, J. (2010). Integration of a cogeneration unit into a kraft pulping process. Applied Thermal Engineering, 30(17-18), 2724-2729. Lien externe
Gervais, M.-A., Kajl, S., Schweigler, C., & Paris, J. (mai 2007). Conception et paramèters opératoires d'un réseau de chauffage de district [Communication écrite]. VIIIième Colloque Interuniversitaire Franco-Québecois, Montréal, Québec. Non disponible
Gagnon, C., Samkocwa, D., Vaillancourt, J., Ruiz, J., & Paris, J. (1998). Modélisation de la rétention et validation sur machines à simple et double toile. ATIP. Association technique de l'industrie papetière : (1989), 52(4), 189-194. Non disponible
Gavazzo, G., Valade, J., Law, K., & Paris, J. Behavior of thermomechanical pulps, chemithermomechanical pulps, and chemimechanical pulps of black spruce [picea mariana] during recycling [Communication écrite]. 28e Congresso Anual De Celulose E Papel (Abtcp). Non disponible
Haddad, M., Mikhaylin, S., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane: Ion exchange membrane fouling identification and mechanisms. Journal of Colloid and Interface Science, 488, 39-47. Lien externe
Haddad, M., Mikhaylin, S., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical Acidification of Kraft Black Liquor: Effect of Fouling and Chemical Cleaning on Ion Exchange Membrane Integrity. ACS Sustainable Chemistry and Engineering, 5(1), 168-178. Lien externe
Haddad, M., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical acidification of Kraft black liquor: Impacts of pulsed electric field application on bipolar membrane colloidal fouling and process intensification. Journal of Membrane Science, 524, 482-492. Lien externe
Haddad, M., Bazinet, L., Savadogo, O., & Paris, J. (2017). A feasibility study of a novel electro-membrane based process to acidify Kraft black liquor and extract lignin. Process Safety and Environmental Protection, 106, 68-75. Lien externe
Haddad, M., Labrecque, R., Bazinet, L., Savadogo, O., & Paris, J. (2016). Effect of process variables on the performance of electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane. Chemical Engineering Journal, 304, 977-985. Lien externe
Hämäläinen, S., Marinova, M., Pesonen, H.-L., & Paris, J. (octobre 2012). Successful development of collaborative networks in the forest biorefinery context [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Colombie-Britannique. Non disponible
Hermann, A., Bednar, F., Perrier, M., Paradis, J., & Paris, J. (2006). Dynamics of Whitewater Consistency of a Pilot Paper Machine Using a Peo/Cofactor Retention Aid System. Canadian Journal of Chemical Engineering, 84(5), 597-603. Lien externe
Houle, J. F., Brousseau, Y., Dorica, J., & Paris, J. (1999). Reduction of Fresh Water Consumption for Process and Non- Process Uses in an Integrated Newsprint Mill. Pulp & Paper Canada, 100(3), 50-53. Non disponible
Houle, J. F., Brousseau, Y., Dorica, J., & Paris, J. (janvier 1998). Reduction of fresh water consumption for process and non-process uses in an integrated newsprint mill [Communication écrite]. 84th Annual Meeting of the Technical Section of Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Houle, J.-F., Péters, F., Lacroix, F., & Paris, J. (janvier 1997). Analyse des impacts thermiques de la recirculation des eaux traitées dans une usine de papier journal [Communication écrite]. ACPP, section technique, CTE, Québec. Non disponible
Hawes, D. W., Paris, J., Feldman, D., & Banu, D. (janvier 1995). Heat storage and heat conservation in buildings [Communication écrite]. ITEC'95, Agadir. Non disponible
Hosatte, D. S., Sorin, M., Génois, J., Lafrance, G., Asselman, T., & Paris, J. (janvier 1993). Gestion de l'énergie thermique dans le secteur agro-alimentaire par des PACC [Communication écrite]. Heat pumps in cold climates/Proceed. Caneta research ed, Moncton/Mississauga. Lien externe
Houle, J.-F., & Paris, J. (1994). Process for incorporation of a phase change material into gypsum wallboards and other aggregate construction panels. (Brevet no CA1332683). Lien externe
Javad-Keshtkar, M., Perrier, M., & Paris, J. (octobre 2012). Simultaneous water and energy optimization of Kraft Mills [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible
Jahnke, A., Costa, A., & Paris, J. (mai 2005). Caractérisation du fonctionnement d'une pompe à chaleur à absorption [Communication écrite]. VIIe colloque Franco-Québécois sur la thermique des systèmes, Université de Rennes. Non disponible
Jahnke, A., Costa, A., Ziegler, F., & Paris, J. (janvier 2005). Experimental plan and statistical analysis of laboratory results for an absorption heat pump [Communication écrite]. International Absorption Heat Pump Conference, Denver. Non disponible
Jacob, A., & Paris, J. (2003). Data Sampling and Reconciliation - Application to Pulp and Paper Mills. Part 1: Methodology and Implementation. Appita Journal, 56(1), 25-+-25-+. Non disponible
Jacob, J., & Paris, J. (2003). Data Sampling and Reconciliation - Application to Pulp and Paper Mills. Part II: Case Studies. Appita Journal, 56(2), 116-121. Non disponible
Jacob, J., Viviant, C., Houle, J. F., & Paris, J. (2002). Analyse et optimisation des réseaux d'eau dans les procédés de fabrication des pâtes et papiers : la technique du pincement à l'oeuvre. Pulp & Paper Canada, 103(3), 24-27. Non disponible
Jacob, J., Kaipe, H., Couderc, F., & Paris, J. (2002). Water Network Analysis in Pulp and Paper Processes by Pinch and Linear Programming Techniques. Chemical Engineering Communications, 189(2), 184-206. Lien externe
Jacob, J., Hemphala, H., & Paris, J. (2001). Cueillette et réconciliation des données pour la simulation de procédes en opération. Pulp & Paper Canada, 102(5), 53-56. Non disponible
Jacob, J., Viviant, C., Houle, J. F., & Paris, J. (janvier 1998). Analyse et optimisation des réseaux d'eau des procédés papetiers [Communication écrite]. 84th Annual Meeting of the Technical Section of Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2016). Effect of mixing hydrodynamics on the particle and filtration properties of precipitated lignin. Chemical Engineering Research and Design, 105, 94-106. Lien externe
Kannangara, M., Marinova, M., Perrier, M., & Paris, J. (2016). Forest Biomass and Paper Industry, a Pathway to Green Biofuels. Athens Journal of Technology & Engineering, 3(2), 119-132. Lien externe
Kannangara, M., Liebich, C., Marinova, M., Fradette, L., & Paris, J. (octobre 2012). Impact of lignin extraction on the recovery loop of the Kraft process : measures to minimize the consumption of chemicals [Communication écrite]. 4th Nordic Wood Biorefinery Conference, Helsinki, Finlande. Lien externe
Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2012). Lignin recovery by acid precipitation in a kraft mill: an energy perspective. J-FOR Journal of Science & Technology for Forest Products and Processes, 2(4), 28-32. Non disponible
Kummert, M., Bernier, M., Costa, A., & Paris, J. (2007). A comparison between geothermal absorption and compression heat pumps for space conditioning. International Journal of Environmental Studies, 64(4), 467-487. Lien externe
Kerekes, R., Daneault, C., & Paris, J. (janvier 2000). Balance between needs and educational programs in sciences, the case of the canadian industry [Communication écrite]. 33rd ABCP an. meet. programmes de formation des ressources humaines, Sao Paulo. Non disponible
Labidi, J., Chahbani, H., & Paris, J. (mai 2001). Efficacité exergétique des pompes à chaleur à absorption [Communication écrite]. Thermique des systèmes. Colloque universitaire franco-québécois, 5, Lyon, France. Non disponible
Labidi, J., Zmeureanu, R., Solati, B., Haghighat, F., & Paris, J. (mai 2001). Évaluation technico-economique de l'utilisation des pompes à chaleur à absorption au Canada [Communication écrite]. Thermique des systèmes. Colloque universitaire franco-québécois, 5, Lyon, France. Non disponible
Laidi, J., Mutjé, P., Pèlach, M. A., Turin, X., & Paris, J. (2001). Integración de procesos en fábricas de papel: de la teoría a la prática. El Papel, 80-87. Non disponible
Labidi, J., Boulé, E., & Paris, J. (2000). On Intrinsic Exergy Efficiency and Heat Pumps. Chemical Engineering Research & Design, 78(2), 180-183. Lien externe
Labidi, J., Noël, G., Perrier, M., & Paris, J. (1999). Analyse des procédés et optimisation énergétique. Dans Browne, T., & Williamson, P. N. (édit.), Réduction des coûts énergétiques dans l'industrie des pâtes et papiers: une monographie (29-64). Non disponible
Lambert, J., Sorin, M., & Paris, J. (1997). Analysis of oxygen-enriched combustion for steam methane reforming (smr). Energy, 22(8), 817-825. Lien externe
Lambert, J., Sun, Y., Marino, M., Sorin, M., Paris, J., & Legault, A. (1997). Waste water reduction at a canadian paperboard mill. CADDET newsletter, 2, 17-19. Non disponible
Labidi, J., Tsingakis, D., & Paris, J. (janvier 1996). Modélisation d'un évaporateur multiples effets pour la concentration des liqueurs Kraft sur ASPLEN PLUS [Communication écrite]. Actes de COMAGEP2, Djerba. Non disponible
Lambert, J., Sorin, M., & Paris, J. (juillet 1996). Thermodynamic efficiency of steam methane reforming with oxygen enriched combustion [Communication écrite]. 5. world congress of chemical engineering, San Diego, CA (United States). Non disponible
Leroy, C., Sorin, M., & Paris, J. (janvier 1995). Exergy and pinch analysis of a gas conversion process [Communication écrite]. ITEC'95, Agadir. Non disponible
Labidi, J., Paris, J., & Legoff, P. (janvier 1995). Graphical representation of exergy balance of an absorption heat pump [Communication écrite]. ITEC'95, Agadir. Non disponible
Legros, R., Sotudeh-Gharebaagh, R., Paris, J., & Chaouki, J. (mai 1995). Process simulation of a circulating fluidized bed coal combustor [Communication écrite]. 13th International Conference on Fluidized Bed Combustion, Orlando, FL, USA. Non disponible
Labidi, J., Paris, J., & Le Goff, P. (1994). New concept in gas-fired heat pump reversed rectification heat pump. Renewable Energy, 5(5-8), 1235-1239. Lien externe
Labidi, J., Legoff, P., & Paris, J. (janvier 1994). Une thermofrigopompe à absorption pour la production simultanée de fraicheur et de chaleur utiles [Communication écrite]. International conference, CFCs, the day after, Padoue. Lien externe
Lortie, R., Klvana, D., & Paris, J. (1983). Isothermes d'adsorption de l'ion chromique sur l'hydroxyde de titane fraîchement précipité. Canadian Journal of Chemical Engineering, 61(4), 548-553. Lien externe
Marinova, M., Perrier, M., & Paris, J. (2014). Implementation of a Forest Biomass-based Biofuel Industry: A Canadian Experience. Renewable Energy and Power Quality Journal, 942-947. Lien externe
Moshkelani, M., Marinova, M., Perrier, M., & Paris, J. (2013). The Forest Biorefinery and Its Implementation in the Pulp and Paper Industry: Energy Overview. Applied Thermal Engineering, 50(2), 1427-1436. Lien externe
Marinova, M., Rafione, T., Srinivasan, B., & Paris, J. (septembre 2012). The integrated forest biorefinery - example of sustainable resources utilization [Communication écrite]. 4th International Conference on Engineering for Waste and biomass Valorisation, Porto, Portugal. Non disponible
Mateos-Espejel, E., Savulescu, L., & Paris, J. (2011). Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part I: Definition and characterization. Chemical Engineering Research and Design, 89(6), 742-752. Lien externe
Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2011). Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis. Chemical Engineering Research and Design, 89(6), 729-741. Lien externe
Moshkelani, M., Marinova, M., & Paris, J. (mai 2011). La bioraffinerie forestière et son application dans l'industrie des pâtes et papiers [Communication écrite]. 79e Congrès de l'ACFAS, Sherbrooke. Non disponible
Mostajeran Goortani, B., Mateos-Espejel, E., Moshkelani, M., & Paris, J. (2011). Energy efficiency improvement of a Kraft process through practical stack gases heat recovery. Applied Thermal Engineering, 31(17-18), 4091-4096. Lien externe
Moshkelani, M., Marinova, M., & Paris, J. (mars 2011). The forest biorefinery and its implementation in the pulp & paper industry [Communication écrite]. 2nd European conference on Polygeneration, Tarragona, Espagne. Non disponible
Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2011). Unified methodology for thermal energy efficiency improvement: Application to Kraft process. Chemical Engineering Science, 66(2), 135-151. Lien externe
Mateos-Espejel, E., Marinova, M., Jemaa, N., & Paris, J. (mai 2010). Le concept de la bioraffinerie verte [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Mateos-Espejel, E., Moshkelani, M., & Paris, J. (août 2010). Development of a green kraft mill based on energy efficiency optimization [Communication écrite]. 3rd International IUPAC Conference on Green Chemistry, Ottawa. Non disponible
Mateos-Espejel, E., Marinova, M., Mostajeran-Goortani, B., & Paris, J. (janvier 2010). Eco-industrial cluster centered on a Kraft mill in rural Canada [Communication écrite]. World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Mateos-Espejel, E., Moshkelani, M., & Paris, J. (mai 2010). Efficacité énergétique et développement durable [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. (2010). Energy Implications of Water Reduction Strategies in Kraft Process. Part I, Methodology. Pulp & Paper-Canada, 111(3), 34-37. Non disponible
Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. (2010). Energy Implications of Water Reduction Strategies in Kraft Process. Part II: Results. Pulp & Paper-Canada, 111(3), 38-41. Non disponible
Marinova, M., Mateos-Espejel, E., & Paris, J. (2010). From kraft mill to forest biorefinery: An energy and water perspective. II. Case study. Cellulose Chemistry and Technology, 44(1-3), 21-26. Lien externe
Mateos-Espejel, E., Alva-Argaez, A., Savulescu, L., & Paris, J. (2010). From kraft mills to forest biorefinery: An energy and water perspective. I. Methodology. Cellulose Chemistry and Technology, 44(1-3), 15-19. Lien externe
Marinova, M., Eilers, H., Barreto Do Carmo, H., & Paris, J. (août 2010). Opportunities for furfural production form hardwood chips pre-hydrolysate [Communication écrite]. 3rd International IUPAC Conference on Green Chemistry, Ottawa, Ontario. Non disponible
Marinova, M., Mateos-Espejel, E., & Paris, J. (2010). Revue de perspectives d'avenir prometteur et durable pour l'industrie canadienne des pâtes et papiers. Pulp & Paper-Canada, 111(5), 29-33. Non disponible
Mateos-Espejel, E., Marinova, M., Schneider, S., & Paris, J. (2010). Simulation of a Kraft Pulp Mill for the Integration of Biorefinery Technologies and Energy Analysis. Pulp & Paper-Canada, 111(3), 19-23. Non disponible
Marinova, M., Mateos-Espejel, E., & Paris, J. (juin 2010). Successful conversion of a Kraft mill into a forest biorefinery : Energy analysis issues [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible
Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2010). Systems interactions analysis for the energy efficiency improvement of a Kraft process. Energy, 35(12), 5132-5142. Lien externe
Marinova, M., Mateos-Espejel, E., Jemaa, N., & Paris, J. (2009). Addressing the increased energy demand of a Kraft mill biorefinery: The hemicellulose extraction case. Chemical Engineering Research and Design, 87(9), 1269-1275. Lien externe
Marinova, M., Mateos-Espejel, E., & Paris, J. (septembre 2009). Challenges before the Canadian Biorefinery : a case study [Communication écrite]. 2nd Nordic Wood Biorefinery Conference, Helsinki, Finland. Non disponible
Mateos-Espejel, E., Alva-Argaez, A., Savulescu, L., & Paris, J. (septembre 2009). From kraft mills to forest biorefinery : an energy and water perspective [Communication écrite]. 2nd Nordic Wood Biorefinery Conference, Helsinki, Finland. Non disponible
Mateos-Espejel, E., Mostajeran-Goortani, B., & Paris, J. (mai 2009). Intégration de la cogénération d'énergie dans une usine de pâte et papier [Communication écrite]. 9e Colloque Inter-universitaire Franco-Québécois, Lille. Non disponible
Marinova, M., Mateos-Espejel, E., & Paris, J. (août 2009). Towards a sustainable forest biorefinery [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Irlande. Non disponible
Marinova, M., Beaudry, C., Taoussi, A., Trépanier, M., & Paris, J. (2008). Economic Assessment of Rural District Heating by Bio-Steam Supplied by a Paper Mill in Canada. Bulletin of Science, Technology & Society, 28(2), 159-173. Disponible
Marinova, M., Beaudry, C., Taoussi, A., Trépanier, M., & Paris, J. (2008). Economic assessment of rural district heating by bio-steam supplied by a paper mill in Canada. (Rapport technique n° PUR 948). Non disponible
Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. Energy implications of water reduction strategies in a kraft process. Part I : Methodology [Communication écrite]. PAPTAC 94th Annual Meeting, Montréal, Québec. Non disponible
Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. Energy implications of water reduction strategies in a kraft process. Part II : Results [Communication écrite]. PAPTAC 94th Annual Meeting, Montréal, Québec. Non disponible
Marinova, M., Trépanier, M., & Paris, J. Feasibility of rural district heating by bio-steam supplied by a Kraft pulp mill. [Communication écrite]. PAPTAC 94th Annual Meeting, Edmonton, Alberta. Non disponible
Marinova, M., Mateos-Espejel, E., Bakhtiari, B., & Paris, J. (janvier 2008). Guidelines for the implementation of a trigeneration unit in a Kraft process [Communication écrite]. PAPTAC 94th Annual Meeting, Edmonton, Alberta. Non disponible
Mateos-Espejel, E., Marinova, M., Bakhtiari, B., Savulescu, L., Maréchal, F., & Paris, J. (janvier 2008). Integrated methodology for energy and water reduction in the Kraft process [Communication écrite]. International Conference Modeling and Simulation in the Pulp and Paper Industry, Madrid, Espagne. Non disponible
Marinova, M., Trépanier, M., & Paris, J. (mai 2008). Stimulating rural economic development [Communication écrite]. 13th Annual Conference of the Canadian District Energy Association, Calgary, Alberta. Non disponible
Mateos-Espejel, E., Marinova, M., Diamantis, D., Fradette, L., & Paris, J. (juillet 2008). Strategy for converting a conventional kraft pulp mill into sustainable green mill [Communication écrite]. World Renewable Energy Congress X, Glasgow, Scotland. Non disponible
Mateos, E., Marinova, M., Maréchal, F., & Paris, J. (mai 2007). Analyse énergétique d'un train d'évaporateurs par la méthode de double représentation [Communication écrite]. VIIIième Colloque Interuniversitaire Franco-Québecois, Montréal, Québec. Non disponible
Mahendraker, V., Lavault, A., Young, F., Paice, M., & Paris, J. (janvier 2007). Biochemical acidogenic potential (BAP) of complex pulp and paper wastewaters from Canadian Mills [Communication écrite]. PAPTAC 93rd, Montréal, Québec. Non disponible
Mateos, E., Madhta, E. L. M., Marinova, M., & Paris, J. (2007). Energy and water in the pulp and paper industry, the two solitudes. Chemical Engineering Transactions, 11(2), 695-700. Non disponible
Mateos, E., Marinova, M., Bakhtiari, B., & Paris, J. (octobre 2007). A new methodology for the implementation of trigeneration in industry : Application to the kraft process [Communication écrite]. 1st European Conference on Polygeneration Technologies and Applications, Tarragona, Spain. Non disponible
Marino, S., Braker, J., Carrière, M., & Paris, J. (janvier 2000). Recirculation of process and non-process water in an integrated newsprint mill: a case study [Communication écrite]. 33rd ABTCP an. meet. technical session V, Sao Paulo. Non disponible
Moussaoui, A., Orccotoma, J. A., Paris, J., & Perrier, M. (septembre 1997). Commande prédictive et adaptative d'un réseau d'eaux blanches de procédé intégré de papier journal [Communication écrite]. 6e Congrès français de génie des procédés: Nouvelles frontières du génie des procédés, Paris, France. Publié dans Récents progrès en génie des procédés, 11(56). Non disponible
Neuhann, V., Zmeureanu, R., Solati, B., Paris, J., & Haghighat, F. (janvier 2002). Life-cycle analysis of refrigeration systems for air-conditioning an office building [Communication écrite]. World renewable energy congress VII, Cologne. Non disponible
Ortiz-Cordova, M., Hagedorn, A., Orccotoma, J.-A., Baril, J., Begin, B., & Paris, J. (2006). Analyse de la variabilité de la force du papier dans une usine integrée de papier journal. Papetières du Québec, 17(2), 16-20. Non disponible
Ortiz-Cordova, M., Hagedorn, A., Orccotoma, J.-A., Baril, J., Begin, B., & Paris, J. (2006). Analysis of paper strength variability in an integrated newsprint mill. Pulp and Paper Canada, 107(10), 37-43. Non disponible
Orccotoma, J. A., Paris, J., & Perrier, M. (2001). Paper Machine Controllability: Effect of Disturbances on Basis Weight and First-Pass Retention. Journal of Process Control, 11(4), 401-408. Lien externe
Orccotoma, J. A., Paris, J., & Perrier, M. (1999). Dynamic Analysis of Fibrous Material and Dissolved Solids Distribution in the Wet-End of a Newsprint Mill. Appita Journal, 52(2), 105-113. Non disponible
Oulidi, A., Deutsch, B., & Paris, J. (1999). Statistical Analysis of Sheet Breaks in a Paper Machine. Pulp & Paper Canada, 100(5), 44-49. Non disponible
Oulidi, A., & Paris, J. (janvier 1998). Statistical analysis of web breaks on a paper machine [Communication écrite]. 84th Annual Meeting [of the] Technical Section, Cppa. Non disponible
Orccotoma, J. A., Paris, J., Perrier, M., & Roche, A. A. (1997). Dynamics of white water networks during web breaks. Tappi Journal, 80(12), 101-110. Lien externe
Orccotoma, J. A., Stiee, D., Paris, J., & Perrier, M. (janvier 1996). Transient fines distribution during broke recirculation in an integrated newsprint mill [Communication écrite]. 1996 82nd Annual Meeting of Technical Section Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Orccotoma, J.-A., Carrière, M., Walosik, S., & Paris, J. Detailed balances using spreadsheets : application to pulp and paper processes [Communication écrite]. Conference Technologique Estivale 1995 (CPPA). Non disponible
Perin-Levasseur, Z., Marechal, F., & Paris, J. (2010). Analysis of a Biorefinery Integration in a Bisulfite Pulp Process. Pulp & Paper-Canada, 111(3), 31-33. Non disponible
Perin-Levasseur, Z., Maréchal, F., & Paris, J. (juin 2010). Efficient energy conversion and biorefinery implementation in a chemical pulp mill [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible
Perin-Levasseur, Z., Benali, M., & Paris, J. (juin 2010). Lignin extraction technology integrated in a kraft pulp mill : implementation strategy [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible
Perin-Levasseur, Z., Crolard, L., Labrecque, R., & Paris, J. (août 2010). Lignin extraction technology integrated into an existing kraft mill [Communication écrite]. 3rd International IUPAC Conference on Green Chemistry, Ottawa, Ontario. Non disponible
Périn-Levasseur, Z., Mateos-Espejel, E., Savulescu, L., Risse, G., & Paris, J. (mai 2010). Optimisation simultanée de l'eau et de l'énergie dans le procédé kraft : Enjeux et méthodes émergentes [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Périn-Levasseur, Z., Benali, M., Paris, J., Labrecque, R., & Cloutier, J.-N. (mai 2010). Traitement et transformation de la lignine [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Pinto-Pires, R. E., Mateos-Espejel, E., Perrier, M., & Paris, J. Effect of variability on the thermal efficiency of a kraft mill evaporation unit [Communication écrite]. Control Systems/PanPacific Conference, Vancouver. Non disponible
Persson, K., Labidi, L., Vera, J. H., & Paris, J. (janvier 2000). Measurement of activity coefficients of lignin in aqueous NaCl solutions [Communication écrite]. 86th ann. meet. PAPTAC book C. Non disponible
Paris, J., & Stuart, P. R. (janvier 2000). Process integration applied to system closure in pulp and paper mills [Communication écrite]. International symposium on environmental friendly and emerging technologies for a sustainable pulp & paper industry, Taipei, Taiwan. Non disponible
Paris, J., & Stuart, P. (janvier 2000). Process intergration applied to system closure in pulp and paper mills [Communication écrite]. intl. symp. on environ. friendly and emerging technologies for a sustainable P&P indus, Tapei. Non disponible
Paris, J. (2000). A Systems Approach to System Closure in Integrated Newsprint Mills. Pulp & Paper Canada, 101(5), 34-42. Non disponible
Paris, J., & Yelon, A. (1999). Pulp and Paper Research and Education at Polytechnique: a Growing Partnership. Pulp & Paper Canada, 100(5), 35-37. Non disponible
Paris, J., Dorica, J., Francis, D. W., & Orccotoma, J. A. (1999). System Closure in Integrated Newsprint Mills: Review of R&D Issues. Pulp & Paper Canada, 100(9), 24-28. Non disponible
Paris, J., & Yelon, A. (janvier 1998). Pulp and paper research and education at polytechnique: a growing partnership [Communication écrite]. 84th Annual Meeting of the Technical Section of Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Paris, J., Dorica, J., Francis, D., & Orccotoma, J.-A. (janvier 1998). System closure in integrated newsprint mills: r&d issues [Communication écrite]. 84th Annual Meeting [of the] Technical Section, Cppa. Non disponible
Paris, J. (janvier 1996). Simulation de procédés complexes à l'aide d'un logiciel modulaire, technique du jeu de construction [Communication écrite]. Actes de COMAGEP2, Djerba. Non disponible
Paris, J., & Jolly, R. (1989). Observations sur le comportement à la fusion-solidification du chlorure de calcium hexahydrate. Thermochimica Acta, 152(2), 271-278. Lien externe
Quirion-Blais, O., Trépanier, M., & Paris, J. (mai 2010). Chauffage urbain par des usines papetières au Canada [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Quirion-Blais, O., Cakembergh-Mas, A., Mateos-Espejel, E., Trépanier, M., & Paris, J. (mai 2010). Grappes éco-industrielles centrées sur des usines papetières [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Quirion-Blais, O., Marinova, M., Mateos Espejel, E., Trépanier, M., Fradette, L., Legros, R., & Paris, J. (mars 2009). Forest biorefinery-based eco-industrial clusters in canada : the energy challenge [Communication écrite]. POLYCITY General Meeting, Barcelone, Espagne. Non disponible
Rueda, C., Marinova, M., Paris, J., Ruiz, G., & Coz, A. (2016). Technoeconomic assessment of different biorefinery approaches for a spent sulfite liquor. Journal of Chemical Technology & Biotechnology, 91(10), 2646-2653. Lien externe
Rafione, T., Marinova, M., Montastruc, L., & Paris, J. (2014). The Green Integrated Forest Biorefinery: An innovative concept for the pulp and paper mills. Applied Thermal Engineering, 73(1), 74-81. Lien externe
Rofouie, P., Moshkelani, M., Perrier, M., & Paris, J. (2014). A modified thermodynamic equilibrium model for woody biomass gasification. Canadian Journal of Chemical Engineering, 92(4), 593-602. Lien externe
Rafione, T., Marinova, M., Montastruc, L., Domenech, S., Srinivasan, B., & Paris, J. (2012). Optimization of water and energy consumption in an integrated forest biorefinery. J-FOR Journal of Science & Technology for Forest Products and Processes, 2(4), 54-59. Non disponible
Shafiei, S., Floquet, P., Domenech, S., & Paris, J. (2005). Genetic algorithm reliability for white water network optimization in pulp and paper industry. Chemical Engineering Transactions, 6, 221-226. Non disponible
Savu, E., Sarrailh, S., Marechal, F., & Paris, J. (2004). Fermeture des circuits dans un procede de desencrage : analyse et simulation. Pulp & Paper Canada, 105(2), 28-33. Non disponible
Shafiei, S., Domenech, S., Koteles, R., & Paris, J. (2004). System Closure in an Integrated Newsprint Mill, Practical Application of the Genetic Algorithm. Pulp & Paper Canada, 105(6), 40-43. Non disponible
Shafiei, S., Floquet, P., Davin, A., Domenech, S., & Paris, J. (juin 2003). Whitewater network optimization in pulp & paper industry [Communication écrite]. IcheaP 6 : 6th Italian conference on chemical and process engineering, Pisa, Italy. Non disponible
Samkocwa, D., Ruiz, J., De Ven, T. G. M. V., & Paris, J. (2002). Modélisation de la rétention des particules fines sur la table plate d'une machine à papier. Journal of Pulp and Paper Science, 28(1), 1-5. Non disponible
Shafiei, S., Domenech, S., Koteles, R., & Paris, J. System closure in an integrated newsprint mill, practical application of the genetic algorithm [Communication écrite]. 88th Annual Meeting Preprints "A". Non disponible
Stuart, P. R., & Paris, J. (janvier 2002). Water management in pulp & paper processes [Communication écrite]. International conference on the fiber industry and environmental biocomplexity, Auburn, Alabama. Non disponible
Savu, E., Sarrailh, F., Maréchal, F., & Paris, J. (2001). Impact de la fermeture des circuits dans un procédé de désencrage. Pulp & Paper Canada, 155-158. Non disponible
Souza, F. V., van de Ven, T. G. M., & Paris, J. (janvier 2001). Modelizaçao da drenagem e da retencao: Un enFoque em fenômenos de transporte [Communication écrite]. 34th ABTCP annual meeting, Sao Paulo. Non disponible
Shafiei, S., Domenech, S., Floquet, P., & Paris, J. (janvier 2001). Network analysis by genetic algorithm mathematical programming and process simulation [Communication écrite]. TAPPI 2001 Engineering/finishing & converting conf, San Antonio. Lien externe
Shafiei, S., Domenech, S., Koteles, R., & Paris, J. (mai 2001). System closure in pulp and paper mills: network analysis by genetic algorithm [Communication écrite]. 4th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2001), Florence, Italie. Publié dans Journal of cleaner production, 12(2). Lien externe
Sorin, M., & Paris, J. (1999). Integrated Exergy Load Distribution Method and Pinch Analysis. Computers & Chemical Engineering, 23(4-5), 497-507. Lien externe
Samkocwa, D., Ruiz, J., van de Ven, T. G. M., & Paris, J. (janvier 1999). Modélisation de la rétention des particules fines sur la table plate d'une machine à papier [Communication écrite]. 85th Annual Meeting of the Pulp and Paper Technical Association of Canada. Non disponible
Sorin, M., Bonhivers, J. C., & Paris, J. (1998). Exergy Efficiency and Conversion of Chemical Reactions. Energy Conversion and Management, 39(16-18), 1863-1868. Lien externe
Sorin, M., Lambert, J., & Paris, J. (1998). Exergy Flows Analysis in Chemical Reactors. Chemical Engineering Research & Design, 76(3), 389-395. Lien externe
Sotudeh-Gharebaagh, R., Legros, R., Chaouki, J., & Paris, J. (1998). Simulation of model circulating fluidized bed reactors using aspen plus. Fuel, 77(4), 327-337. Lien externe
Sorin, M., & Paris, J. (1997). Combined exergy and pinch approach to process analysis. Computers & Chemical Engineering, 21, S23-S28. Lien externe
Sorin, M., Bonhivers, J.-C., & Paris, J. (janvier 1997). Exergy efficiency and conversion of chemical reactors [Communication écrite]. Flowers'97- Florence world energy research symp. Non disponible
Sorin, J., Paris, J., & Sapundzhiev, C. (janvier 1996). Analyse thermodynamique appliquée au design de réacteurs canalytiques [Communication écrite]. Actes de COMAGEP2, Djerba. Non disponible
Scalat, S., Banu, D., Hawes, D., Paris, J., Haghichat, F., & Feldman, D. (1996). Full scale thermal testing of latent heat storage in wallboard. Solar Energy Materials and Solar Cells, 44(1), 49-61. Lien externe
Sorin, M., Sapundzhiev, C., & Paris, J. (juin 1996). Thermodynamic efficiency of conventional vs. flow reversal catalytic reactors [Communication écrite]. Symposium on efficiency, costs optimization, simulation and environmental aspects of energy systems (ECOS), Stockholm (Sweden). Non disponible
Scalat, S., Banu, D., Hawes, D., & Paris, J. (janvier 1995). Energy consumption and thermal comfort conditions in buildings using phase change materials [Communication écrite]. ITEC'95, Agadir. Non disponible
Sorin, M., & Paris, J. Exergy load redistribution method for multi-step process analysis [Communication écrite]. ASME Annual Meeting, San Francisco, Calif.. Publié dans AES, 35. Non disponible
Sorin, M., & Paris, J. (janvier 1995). Exergy load redistribution methos for multi-step process analysis [Communication écrite]. ASME ann. Meet, San Francisco. Non disponible
Sorin, M., Brodyanski, V., & Paris, J. (juin 1995). Novel approach to exergy analysis [Communication écrite]. International Thermal Energy Congress (ITEC), 1995, Agadir. Non disponible
Sorin, M., Sapundzhiev, C., & Paris, J. (janvier 1994). Application of a new exergy analysis method to a flow reversal reactor [Communication écrite]. 13th intl. symp. on Chemical reaction engineering, Baltimore. Non disponible
Sorin, M., Sapundzhiev, C., & Paris, J. (1994). Application of a new exergy analysis method to a flow reversal SO₂ convertor. Chemical Engineering Science, 49(24, pt. B), 5603-5613. Lien externe
Sorin, M., Brodyansky, V., & Paris, J. (janvier 1994). Observations on exergy efficiency coefficients [Communication écrite]. Florence world energy research symposium - flowers'94, Florence. Non disponible
Sorin, M., Le Goff, P., Paris, J., & Galatone, V. (1994). Thermodynamic efficiency of sorption heat pumps. Renewable Energy, 5(1-4), 412-414. Lien externe
Sorin, M. V., Paris, J., & Brodyansky, V. M. (novembre 1994). Thermodynamic evaluation of a distillation [Communication écrite]. 1994 International Mechanical Engineering Congress and Exposition, Chicago, IL, USA. Non disponible
Towers, M., Browne, T., Kerekes, R., Paris, J., & Tran, H. (2007). Biorefinery Opportunities for the Canadian Pulp and Paper Industry. Pulp and Paper-Canada, 108(6), 26-29. Non disponible
Turon, X., Labidi, J., & Paris, J. (2005). Simulation and Optimisation of a High Grade Coated Paper Mill. Journal of Cleaner Production, 13(15), 1424-1433. Lien externe
Tsingakis, D., Labidi, J., & Paris, J. (juin 1998). Modeling of kraft liquors properties and applications to process simulations [Communication écrite]. 1998 International Chemical Recovery Conference, Tampa, FL, USA. Lien externe
Tsingakis, D., Labidi, J., Darroux, M., & Paris, J. (janvier 1996). Thermodynamic modeling of kraft black liquors [Communication écrite]. 5th world cong. of ch. e, San Diego. Non disponible
Varma, K., Chaouki, J., Lavoie, J.-M., & Paris, J. (juin 2010). Forest biomass gasification integrated to a kraft pulping mill, technology Options [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible
Van De Ven, T. G. M., Qasaimeh, A. A., Pigeon, C., & Paris, J. (2007). The Effect of Calcium Ions on the Efficiency of Polyethylene Oxide-Cofactor Retention Aid Systems. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 297(1-3), 79-83. Lien externe
Van De Ven, T. G. M., Qasaimeh, M. A., & Paris, J. (2005). Fines Deposition on Pulp Fibers and Fines Flocculation in a Turbulent-Flow Loop. Industrial & Engineering Chemistry Research, 44(5), 1291-1295. Lien externe
Van De Ven, T. G. M., Qasaimeh, M. A., & Paris, J. (2004). Peo-Induced Flocculation of Fines: Effects of Peo Dissolution Conditions and Shear History. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 248(1-3), 151-156. Lien externe
Wu, M. R., Paris, J., & Van De Ven, T. G. M. (2007). Flocculation of Papermaking Fines by Poly(Ethylene Oxide) and Various Cofactors: Effects of PEO Entanglement, Salt and Fines Properties. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 303(3), 211-218. Lien externe
Wu, M. R., Paris, J., & Van de Ven, T. G. M. (2007). Pilot Paper Machine Trials on the Retention of Fresh and Recirculated Fines With a PEO/Cofactor Retention Aid System. Journal of Pulp and Paper Science, 33(3), 143-149. Non disponible
Wu, M., Paris, J., & Van de Ven, T. (janvier 2007). Pilot Plant Machine Trials on retention of Fresh and Recirculated Fines with a PEO/Cofactor Retention Aid System [Communication écrite]. PAPTAC 93rd, Montréal, Québec. Non disponible
