Documents dont l'auteur est "Paris, Jean"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Nombre de documents: 229

Chen, J., Adjalle, K., Lai, T. T., Barnabe, S., Perrier, M., & Paris, J. (2020). Effect of Mechanical Pretreatment for Enzymatic Hydrolysis of Woody Residues, Corn Stover and Alfalfa. Waste and Biomass Valorization, 11(11), 5847-5856. Lien externe

Chen, J., Adjallé, K., Barnabé, S., Perrier, M., & Paris, J. (2019). Mechanical and thermal pretreatment processes for increasing sugar production from woody biomass via enzymatic hydrolysis. Waste and Biomass Valorization, 10(7), 2057-2065. Lien externe

Cloutier, J.-N., Paris, J., Savadogo, O., Perrier, M., Labrecque, R., & Champagne, P. (2018). Electrolytic Processing of Kraft Black Liquor- Mass Transfer Investigation. ECS Meeting Abstracts, MA2018-01(20), 1271-1271. Lien externe

Ajao, O., Marinova, M., Savadogo, O., & Paris, J. (2018). Hemicellulose based integrated forest biorefineries: Implementation strategies. Industrial Crops and Products, 126, 250-260. Lien externe

Cloutier, J.-N., Savadogo, O., Paris, J., Perrier, M., Labrecque, R., Kandev, N., & Champagne, P. (octobre 2017). Effect of the basic electrochemical cell operating parameters on the performance of the electrolysis of Kraft pulping black liquor [Communication écrite]. 232nd ECS Fall Meeting, National Harbor, MD. Publié dans Electrochemical Society Transactions, 80(10). Lien externe

Haddad, M., Mikhaylin, S., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane: Ion exchange membrane fouling identification and mechanisms. Journal of Colloid and Interface Science, 488, 39-47. Lien externe

Haddad, M., Mikhaylin, S., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical Acidification of Kraft Black Liquor: Effect of Fouling and Chemical Cleaning on Ion Exchange Membrane Integrity. ACS Sustainable Chemistry and Engineering, 5(1), 168-178. Lien externe

Haddad, M., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical acidification of Kraft black liquor: Impacts of pulsed electric field application on bipolar membrane colloidal fouling and process intensification. Journal of Membrane Science, 524, 482-492. Lien externe

Haddad, M., Bazinet, L., Savadogo, O., & Paris, J. (2017). A feasibility study of a novel electro-membrane based process to acidify Kraft black liquor and extract lignin. Process Safety and Environmental Protection, 106, 68-75. Lien externe

Cloutier, J.-N., Paris, J., Savadogo, O., Perrier, M., Labrecque, R., & Champagne, P. (octobre 2017). Investigation on the Performance of Electrolytic Processing of Kraft Pulping Black Liquor [Résumé]. 232nd ECS Meeting, National Harbor, MD. Publié dans ECS Meeting Abstracts, MA2017-02(22). Lien externe

Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2016). Effect of mixing hydrodynamics on the particle and filtration properties of precipitated lignin. Chemical Engineering Research and Design, 105, 94-106. Lien externe

Haddad, M., Labrecque, R., Bazinet, L., Savadogo, O., & Paris, J. (2016). Effect of process variables on the performance of electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane. Chemical Engineering Journal, 304, 977-985. Lien externe

Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part I: Development of new key performance indicators (KPI). Chemical Engineering Research and Design, 115, 160-172. Lien externe

Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part II: Diagnostics and identification of improvement projects. Chemical Engineering Research and Design, 115, 107-115. Lien externe

Kannangara, M., Marinova, M., Perrier, M., & Paris, J. (2016). Forest Biomass and Paper Industry, a Pathway to Green Biofuels. Athens Journal of Technology & Engineering, 3(2), 119-132. Lien externe

Rueda, C., Marinova, M., Paris, J., Ruiz, G., & Coz, A. (2016). Technoeconomic assessment of different biorefinery approaches for a spent sulfite liquor. Journal of Chemical Technology & Biotechnology, 91(10), 2646-2653. Lien externe

Rafione, T., Marinova, M., Montastruc, L., & Paris, J. (2014). The Green Integrated Forest Biorefinery: An innovative concept for the pulp and paper mills. Applied Thermal Engineering, 73(1), 74-81. Lien externe

Marinova, M., Perrier, M., & Paris, J. (2014). Implementation of a Forest Biomass-based Biofuel Industry: A Canadian Experience. Renewable Energy and Power Quality Journal, 942-947. Lien externe

Rofouie, P., Moshkelani, M., Perrier, M., & Paris, J. (2014). A modified thermodynamic equilibrium model for woody biomass gasification. Canadian Journal of Chemical Engineering, 92(4), 593-602. Lien externe

Ajao, O., Marinova, M., Savadogo, O., & Paris, J. (2014). Process for cost and energy efficient production of furfural from Kraft hardwood pre-hydrolysate. Journal of Bioprocess Engineering and Biorefinery, 3(4), 296-307. Lien externe

Moshkelani, M., Marinova, M., Perrier, M., & Paris, J. (2013). The Forest Biorefinery and Its Implementation in the Pulp and Paper Industry: Energy Overview. Applied Thermal Engineering, 50(2), 1427-1436. Lien externe

Chegini, S., Marinova, M., Chadjaa, H., Jolicoeur, M., & Paris, J. (octobre 2012). Butanol production from hemicelluloses hydrolysates [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Colombie-Britannique. Non disponible

Kannangara, M., Liebich, C., Marinova, M., Fradette, L., & Paris, J. (octobre 2012). Impact of lignin extraction on the recovery loop of the Kraft process : measures to minimize the consumption of chemicals [Communication écrite]. 4th Nordic Wood Biorefinery Conference, Helsinki, Finlande. Lien externe

Marinova, M., Rafione, T., Srinivasan, B., & Paris, J. (septembre 2012). The integrated forest biorefinery - example of sustainable resources utilization [Communication écrite]. 4th International Conference on Engineering for Waste and biomass Valorisation, Porto, Portugal. Non disponible

Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2012). Lignin recovery by acid precipitation in a kraft mill: an energy perspective. J-FOR Journal of Science & Technology for Forest Products and Processes, 2(4), 28-32. Non disponible

Ajao, O., Rafione, T., Marinova, M., Legros, R., Fradette, L., & Paris, J. (octobre 2012). Opportunities for energy upgrading by means of an absoption heat pump in an integrated forest biorefinery [Communication écrite]. 4th Nordic Wood Biorefinery Conference, Helsinki, Finlande. Non disponible

Rafione, T., Marinova, M., Montastruc, L., Domenech, S., Srinivasan, B., & Paris, J. (2012). Optimization of water and energy consumption in an integrated forest biorefinery. J-FOR Journal of Science & Technology for Forest Products and Processes, 2(4), 54-59. Non disponible

Javad-Keshtkar, M., Perrier, M., & Paris, J. (octobre 2012). Simultaneous water and energy optimization of Kraft Mills [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible

Hämäläinen, S., Marinova, M., Pesonen, H.-L., & Paris, J. (octobre 2012). Successful development of collaborative networks in the forest biorefinery context [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Colombie-Britannique. Non disponible

Mateos-Espejel, E., Savulescu, L., & Paris, J. (2011). Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part I: Definition and characterization. Chemical Engineering Research and Design, 89(6), 742-752. Lien externe

Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2011). Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis. Chemical Engineering Research and Design, 89(6), 729-741. Lien externe

Moshkelani, M., Marinova, M., & Paris, J. (mai 2011). La bioraffinerie forestière et son application dans l'industrie des pâtes et papiers [Communication écrite]. 79e Congrès de l'ACFAS, Sherbrooke. Non disponible

Mostajeran Goortani, B., Mateos-Espejel, E., Moshkelani, M., & Paris, J. (2011). Energy efficiency improvement of a Kraft process through practical stack gases heat recovery. Applied Thermal Engineering, 31(17-18), 4091-4096. Lien externe

Moshkelani, M., Marinova, M., & Paris, J. (mars 2011). The forest biorefinery and its implementation in the pulp & paper industry [Communication écrite]. 2nd European conference on Polygeneration, Tarragona, Espagne. Non disponible

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2011). A model for analysis and design of H2O-LiBr absorption heat pumps. Energy Conversion and Management, 52(2), 1439-1448. Lien externe

Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2011). Unified methodology for thermal energy efficiency improvement: Application to Kraft process. Chemical Engineering Science, 66(2), 135-151. Lien externe

Perin-Levasseur, Z., Marechal, F., & Paris, J. (2010). Analysis of a Biorefinery Integration in a Bisulfite Pulp Process. Pulp & Paper-Canada, 111(3), 31-33. Non disponible

Quirion-Blais, O., Trépanier, M., & Paris, J. (mai 2010). Chauffage urbain par des usines papetières au Canada [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Mateos-Espejel, E., Marinova, M., Jemaa, N., & Paris, J. (mai 2010). Le concept de la bioraffinerie verte [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Mateos-Espejel, E., Moshkelani, M., & Paris, J. (août 2010). Development of a green kraft mill based on energy efficiency optimization [Communication écrite]. 3rd International IUPAC Conference on Green Chemistry, Ottawa. Non disponible

Mateos-Espejel, E., Marinova, M., Mostajeran-Goortani, B., & Paris, J. (janvier 2010). Eco-industrial cluster centered on a Kraft mill in rural Canada [Communication écrite]. World Congress of Chemical Engineering, Montréal, Québec. Non disponible

Mateos-Espejel, E., Moshkelani, M., & Paris, J. (mai 2010). Efficacité énergétique et développement durable [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Perin-Levasseur, Z., Maréchal, F., & Paris, J. (juin 2010). Efficient energy conversion and biorefinery implementation in a chemical pulp mill [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible

Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. (2010). Energy Implications of Water Reduction Strategies in Kraft Process. Part I, Methodology. Pulp & Paper-Canada, 111(3), 34-37. Non disponible

Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. (2010). Energy Implications of Water Reduction Strategies in Kraft Process. Part II: Results. Pulp & Paper-Canada, 111(3), 38-41. Non disponible

Varma, K., Chaouki, J., Lavoie, J.-M., & Paris, J. (juin 2010). Forest biomass gasification integrated to a kraft pulping mill, technology Options [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible

Marinova, M., Mateos-Espejel, E., & Paris, J. (2010). From kraft mill to forest biorefinery: An energy and water perspective. II. Case study. Cellulose Chemistry and Technology, 44(1-3), 21-26. Lien externe

Mateos-Espejel, E., Alva-Argaez, A., Savulescu, L., & Paris, J. (2010). From kraft mills to forest biorefinery: An energy and water perspective. I. Methodology. Cellulose Chemistry and Technology, 44(1-3), 15-19. Lien externe

Quirion-Blais, O., Cakembergh-Mas, A., Mateos-Espejel, E., Trépanier, M., & Paris, J. (mai 2010). Grappes éco-industrielles centrées sur des usines papetières [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Goortani, B. M., Mateos-Espejel, E., & Paris, J. (2010). Integration of a cogeneration unit into a kraft pulping process. Applied Thermal Engineering, 30(17-18), 2724-2729. Lien externe

Perin-Levasseur, Z., Benali, M., & Paris, J. (juin 2010). Lignin extraction technology integrated in a kraft pulp mill : implementation strategy [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible

Perin-Levasseur, Z., Crolard, L., Labrecque, R., & Paris, J. (août 2010). Lignin extraction technology integrated into an existing kraft mill [Communication écrite]. 3rd International IUPAC Conference on Green Chemistry, Ottawa, Ontario. Non disponible

Marinova, M., Eilers, H., Barreto Do Carmo, H., & Paris, J. (août 2010). Opportunities for furfural production form hardwood chips pre-hydrolysate [Communication écrite]. 3rd International IUPAC Conference on Green Chemistry, Ottawa, Ontario. Non disponible

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2010). Opportunities for the integration of absorption heat pumps in the pulp and paper process. Energy, 35(12), 4600-4606. Lien externe

Périn-Levasseur, Z., Mateos-Espejel, E., Savulescu, L., Risse, G., & Paris, J. (mai 2010). Optimisation simultanée de l'eau et de l'énergie dans le procédé kraft : Enjeux et méthodes émergentes [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Eilers, H., Marinova, M., Jemaa, N., & Paris, J. (mai 2010). Production de furfural à partir d'hydrolysats d'hémicellulose [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2010). Retrofit of Absorption Heat Pumps Into Manufacturing Processes: Implementation Guidelines. Canadian Journal of Chemical Engineering, 88(5), 839-848. Lien externe

Marinova, M., Mateos-Espejel, E., & Paris, J. (2010). Revue de perspectives d'avenir prometteur et durable pour l'industrie canadienne des pâtes et papiers. Pulp & Paper-Canada, 111(5), 29-33. Non disponible

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (mai 2010). Simulation et étude expérimentale d'une pompe à chaleur à absorption de type LiBr-H₂O [Communication écrite]. Congrès français de thermique, Touquet. Lien externe

Mateos-Espejel, E., Marinova, M., Schneider, S., & Paris, J. (2010). Simulation of a Kraft Pulp Mill for the Integration of Biorefinery Technologies and Energy Analysis. Pulp & Paper-Canada, 111(3), 19-23. Non disponible

Cakembergh-Mas, A., Paris, J., & Trépanier, M. (2010). Strategic simulation of the energy management in a Kraft mill. Energy Conversion and Management, 51(5), 988-997. Lien externe

Marinova, M., Mateos-Espejel, E., & Paris, J. (juin 2010). Successful conversion of a Kraft mill into a forest biorefinery : Energy analysis issues [Communication écrite]. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland. Non disponible

Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2010). Systems interactions analysis for the energy efficiency improvement of a Kraft process. Energy, 35(12), 5132-5142. Lien externe

Périn-Levasseur, Z., Benali, M., Paris, J., Labrecque, R., & Cloutier, J.-N. (mai 2010). Traitement et transformation de la lignine [Communication écrite]. 78e Congrès de l'ACFAS, Montréal, Québec. Non disponible

Marinova, M., Mateos-Espejel, E., Jemaa, N., & Paris, J. (2009). Addressing the increased energy demand of a Kraft mill biorefinery: The hemicellulose extraction case. Chemical Engineering Research and Design, 87(9), 1269-1275. Lien externe

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (août 2009). Application of absorption heat pumps in the pulp and paper industry [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Irlande. Non disponible

Marinova, M., Mateos-Espejel, E., & Paris, J. (septembre 2009). Challenges before the Canadian Biorefinery : a case study [Communication écrite]. 2nd Nordic Wood Biorefinery Conference, Helsinki, Finland. Non disponible

Quirion-Blais, O., Marinova, M., Mateos Espejel, E., Trépanier, M., Fradette, L., Legros, R., & Paris, J. (mars 2009). Forest biorefinery-based eco-industrial clusters in canada : the energy challenge [Communication écrite]. POLYCITY General Meeting, Barcelone, Espagne. Non disponible

Mateos-Espejel, E., Alva-Argaez, A., Savulescu, L., & Paris, J. (septembre 2009). From kraft mills to forest biorefinery : an energy and water perspective [Communication écrite]. 2nd Nordic Wood Biorefinery Conference, Helsinki, Finland. Non disponible

Mateos-Espejel, E., Mostajeran-Goortani, B., & Paris, J. (mai 2009). Intégration de la cogénération d'énergie dans une usine de pâte et papier [Communication écrite]. 9e Colloque Inter-universitaire Franco-Québécois, Lille. Non disponible

Costa, A., Bakhtiari, B., Schuster, S., & Paris, J. (juillet 2006). Integration of absorption heat pumps in a Kraft pulp process for enhanced energy efficiency [Communication écrite]. 6th World Energy System Conference (WESC 2006), Turin, Italie. Publié dans Energy, 34(3). Lien externe

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (août 2009). Opportunities for the integration of absorption heat pumps in the pulp and paper process [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Ireland. Non disponible

Marinova, M., Mateos-Espejel, E., & Paris, J. (août 2009). Towards a sustainable forest biorefinery [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Irlande. Non disponible

Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (mai 2009). Une méthodologie systématique d'implantation de pompes à chaleur à absorption dans les procédés : Études de cas [Communication écrite]. IXe Colloque Interuniversitaire Franco-québécois sur la thermique des systèmes, Lille, France. Non disponible

Marinova, M., Beaudry, C., Taoussi, A., Trépanier, M., & Paris, J. (2008). Economic Assessment of Rural District Heating by Bio-Steam Supplied by a Paper Mill in Canada. Bulletin of Science, Technology & Society, 28(2), 159-173. Disponible

Marinova, M., Beaudry, C., Taoussi, A., Trépanier, M., & Paris, J. (2008). Economic assessment of rural district heating by bio-steam supplied by a paper mill in Canada. (Rapport technique n° PUR 948). Non disponible

Pinto-Pires, R. E., Mateos-Espejel, E., Perrier, M., & Paris, J. Effect of variability on the thermal efficiency of a kraft mill evaporation unit [Communication écrite]. Control Systems/PanPacific Conference, Vancouver. Non disponible

Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. Energy implications of water reduction strategies in a kraft process. Part I : Methodology [Communication écrite]. PAPTAC 94th Annual Meeting, Montréal, Québec. Non disponible

Mateos-Espejel, E., Marinova, M., Bararpour, S., & Paris, J. Energy implications of water reduction strategies in a kraft process. Part II : Results [Communication écrite]. PAPTAC 94th Annual Meeting, Montréal, Québec. Non disponible

Marinova, M., Trépanier, M., & Paris, J. Feasibility of rural district heating by bio-steam supplied by a Kraft pulp mill. [Communication écrite]. PAPTAC 94th Annual Meeting, Edmonton, Alberta. Non disponible

Marinova, M., Mateos-Espejel, E., Bakhtiari, B., & Paris, J. (janvier 2008). Guidelines for the implementation of a trigeneration unit in a Kraft process [Communication écrite]. PAPTAC 94th Annual Meeting, Edmonton, Alberta. Non disponible

Mateos-Espejel, E., Marinova, M., Bakhtiari, B., Savulescu, L., Maréchal, F., & Paris, J. (janvier 2008). Integrated methodology for energy and water reduction in the Kraft process [Communication écrite]. International Conference Modeling and Simulation in the Pulp and Paper Industry, Madrid, Espagne. Non disponible

Marinova, M., Trépanier, M., & Paris, J. (mai 2008). Stimulating rural economic development [Communication écrite]. 13th Annual Conference of the Canadian District Energy Association, Calgary, Alberta. Non disponible

Mateos-Espejel, E., Marinova, M., Diamantis, D., Fradette, L., & Paris, J. (juillet 2008). Strategy for converting a conventional kraft pulp mill into sustainable green mill [Communication écrite]. World Renewable Energy Congress X, Glasgow, Scotland. Non disponible

Bednar, F., De Oliveira, M. H., Paris, J., & De Ven, T. (2008). Transient Entanglements and Clusters in Dilute Polymer Solutions. Journal of polymer science. Part B, Polymer physics, 46(3), 253-262. Lien externe

Mateos, E., Marinova, M., Maréchal, F., & Paris, J. (mai 2007). Analyse énergétique d'un train d'évaporateurs par la méthode de double représentation [Communication écrite]. VIIIième Colloque Interuniversitaire Franco-Québecois, Montréal, Québec. Non disponible

Mahendraker, V., Lavault, A., Young, F., Paice, M., & Paris, J. (janvier 2007). Biochemical acidogenic potential (BAP) of complex pulp and paper wastewaters from Canadian Mills [Communication écrite]. PAPTAC 93rd, Montréal, Québec. Non disponible

Towers, M., Browne, T., Kerekes, R., Paris, J., & Tran, H. (2007). Biorefinery Opportunities for the Canadian Pulp and Paper Industry. Pulp and Paper-Canada, 108(6), 26-29. Non disponible

Kummert, M., Bernier, M., Costa, A., & Paris, J. (2007). A comparison between geothermal absorption and compression heat pumps for space conditioning. International Journal of Environmental Studies, 64(4), 467-487. Lien externe

Gervais, M.-A., Kajl, S., Schweigler, C., & Paris, J. (mai 2007). Conception et paramètres opératoires d'un réseau de chauffage de district [Communication écrite]. VIIIième Colloque Interuniversitaire Franco-Québecois, Montréal, Québec. Non disponible

Costa, A., Paris, J., Towers, M., & Browne, T. (2007). Economics of Trigeneration in a Kraft Pulp Mill for Enhanced Energy Efficiency and Reduced GHG Emissions. Energy, 32(4), 474-481. Lien externe

Van De Ven, T. G. M., Qasaimeh, A. A., Pigeon, C., & Paris, J. (2007). The Effect of Calcium Ions on the Efficiency of Polyethylene Oxide-Cofactor Retention Aid Systems. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 297(1-3), 79-83. Lien externe

Mateos, E., Madhta, E. L. M., Marinova, M., & Paris, J. (2007). Energy and water in the pulp and paper industry, the two solitudes. Chemical Engineering Transactions, 11(2), 695-700. Non disponible

Wu, M. R., Paris, J., & Van De Ven, T. G. M. (2007). Flocculation of Papermaking Fines by Poly(Ethylene Oxide) and Various Cofactors: Effects of PEO Entanglement, Salt and Fines Properties. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 303(3), 211-218. Lien externe

Cadotte, M., Tellier, M.-È., Blanco, A., Fuente, E., Van De Ven, T. G. M., & Paris, J. (2007). Flocculation, Retention and Drainage in Papermaking: a Comparative Study of Polymeric Additives. Canadian Journal of Chemical Engineering, 85(2), 240-248. Lien externe

Bakhtiari, B., Mateos, E., Legros, R., & Paris, J. (février 2007). Integration of an absorption heat pump in the kraft pulping process: feasibility study [Communication écrite]. 93rd Annual Meeting Preprints-Book A. Non disponible

Mateos, E., Marinova, M., Bakhtiari, B., & Paris, J. (octobre 2007). A new methodology for the implementation of trigeneration in industry : Application to the kraft process [Communication écrite]. 1st European Conference on Polygeneration Technologies and Applications, Tarragona, Spain. Non disponible

Wu, M. R., Paris, J., & Van de Ven, T. G. M. (2007). Pilot Paper Machine Trials on the Retention of Fresh and Recirculated Fines With a PEO/Cofactor Retention Aid System. Journal of Pulp and Paper Science, 33(3), 143-149. Non disponible

Wu, M., Paris, J., & Van de Ven, T. (janvier 2007). Pilot Plant Machine Trials on retention of Fresh and Recirculated Fines with a PEO/Cofactor Retention Aid System [Communication écrite]. PAPTAC 93rd, Montréal, Québec. Non disponible

Alao, H., Taoussi, A., Trépanier, M., Beaudry, C., & Paris, J. (février 2007). Rural district heating supplied by a Kraft pulp mill: preliminary feasibility study [Communication écrite]. 93rd Annual Meeting of the Pulp and Paper Technical Association of Canada. Non disponible

Bakhtiari, B., Barapour, K., Legros, R., & Paris, J. (mai 2007). Utilisation des pompes à chaleur à absorption dans l'industrie des procédés : revue de la situation [Communication écrite]. VIIIième Colloque Interuniversitaire Franco-Québecois, Montréal, Québec. Non disponible

Ortiz-Cordova, M., Hagedorn, A., Orccotoma, J.-A., Baril, J., Begin, B., & Paris, J. (2006). Analyse de la variabilité de la force du papier dans une usine intégrée de papier journal. Papetières du Québec, 17(2), 16-20. Non disponible

Ortiz-Cordova, M., Hagedorn, A., Orccotoma, J.-A., Baril, J., Begin, B., & Paris, J. (2006). Analysis of paper strength variability in an integrated newsprint mill. Pulp and Paper Canada, 107(10), 37-43. Non disponible

Hermann, A., Bednar, F., Perrier, M., Paradis, J., & Paris, J. (2006). Dynamics of Whitewater Consistency of a Pilot Paper Machine Using a Peo/Cofactor Retention Aid System. Canadian Journal of Chemical Engineering, 84(5), 597-603. Lien externe

Brown, D., Maréchal, F., Heyen, G., & Paris, J. (mai 2005). Application of multi-objective optimisation to process measurement system design [Communication écrite]. European Symposium on Computer-Aided Process Engineering (ESCAPE 15), Barcelona, Spain. Publié dans Computer Aided Chemical Engineering, 20. Lien externe

Brown, D., Maréchal, F., Heyen, G., & Paris, J. Application of multi-objective optimisation to process measurements system design [Communication écrite]. ESCAPE 15, Barcelona. Non disponible

Jahnke, A., Costa, A., & Paris, J. (mai 2005). Caractérisation du fonctionnement d'une pompe à chaleur à absorption [Communication écrite]. VIIe colloque Franco-Québécois sur la thermique des systèmes, Université de Rennes. Non disponible

Brown, D., Marechal, F., & Paris, J. (2005). A Dual Representation for Targeting Process Retrofit, Application to a Pulp and Paper Process. Applied Thermal Engineering, 25(7), 1067-1082. Lien externe

Costa, A., Paris, J., Towers, M., & Browne, T. Economics of Trigeneration in a Pulp Mill for Enhanced Energy Efficiency and Reduced Ghg Emissions [Communication écrite]. Proceedings of Ecos 2005, Vols 1-3 - Shaping Our Future Energy Systems. Non disponible

Cadotte, M., Tellier, M.-È., Blanco, A., Van De Ven, T., & Paris, J. (février 2005). Effects of various retention AIDS on fiber flocculation, filler RETENTION and drainage [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible

Jahnke, A., Costa, A., Ziegler, F., & Paris, J. (janvier 2005). Experimental plan and statistical analysis of laboratory results for an absorption heat pump [Communication écrite]. International Absorption Heat Pump Conference, Denver. Non disponible

Van De Ven, T. G. M., Qasaimeh, M. A., & Paris, J. (2005). Fines Deposition on Pulp Fibers and Fines Flocculation in a Turbulent-Flow Loop. Industrial & Engineering Chemistry Research, 44(5), 1291-1295. Lien externe

Shafiei, S., Floquet, P., Domenech, S., & Paris, J. (2005). Genetic algorithm reliability for white water network optimization in pulp and paper industry. Chemical Engineering Transactions, 6, 221-226. Non disponible

Turon, X., Labidi, J., & Paris, J. (2005). Simulation and Optimisation of a High Grade Coated Paper Mill. Journal of Cleaner Production, 13(15), 1424-1433. Lien externe

Costa, A., Neuhann, V., Vaillancourt, N. J., & Paris, J. (janvier 2004). Applications of absorption heat pumps in the pulp and paper industry for increased efficiency and reduction of greenhouse gas emissions [Communication écrite]. 90th Annual Meeting Preprints B, Montréal, Québec. Non disponible

Brown, D., Marechal, F., Heyen, G., & Paris, J. (2004). Data Reconciliation and Sampling Protocol Design, Case of a Paper Deinking Process. Paperi Ja Puu-Paper and Timber, 86(8), 565-570. Non disponible

Savu, E., Sarrailh, S., Marechal, F., & Paris, J. (2004). Fermeture des circuits dans un procede de desencrage : analyse et simulation. Pulp & Paper Canada, 105(2), 28-33. Non disponible

Brown, D., Marechal, F., & Paris, J. (janvier 2004). Mass integration of a Deinking mill [Communication écrite]. 90th Annual Meeting Preprints A, Montréal, Québec. Non disponible

Chahbani, M. H., Labidi, J., & Paris, J. (2004). Modeling of Adsorption Heat Pumps With Heat Regeneration. Applied Thermal Engineering, 24(2-3), 431-447. Lien externe

Bednar, F., de Oliveira, M. H., van de Ven, T. G. M., & Paris, J. (janvier 2004). Monitoring of poly(ethylene oxide) entanglement [Communication écrite]. 90th Annual Meeting Preprints A, Montréal, Québec. Non disponible

Van De Ven, T. G. M., Qasaimeh, M. A., & Paris, J. (2004). Peo-Induced Flocculation of Fines: Effects of Peo Dissolution Conditions and Shear History. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 248(1-3), 151-156. Lien externe

Bednar, F., Perin-Levasseur, Z., Van De Ven, T. G. M., & Paris, J. (2004). Polyethylene Oxide Disentanglement. Journal of Pulp and Paper Science, 30(2), 49-52. Non disponible

Shafiei, S., Domenech, S., Koteles, R., & Paris, J. (2004). System Closure in an Integrated Newsprint Mill, Practical Application of the Genetic Algorithm. Pulp & Paper Canada, 105(6), 40-43. Non disponible

Jacob, A., & Paris, J. (2003). Data Sampling and Reconciliation - Application to Pulp and Paper Mills. Part 1: Methodology and Implementation. Appita Journal, 56(1), 25-+-25-+. Non disponible

Jacob, J., & Paris, J. (2003). Data Sampling and Reconciliation - Application to Pulp and Paper Mills. Part II: Case Studies. Appita Journal, 56(2), 116-121. Non disponible

Donat, V., Van De Ven, T. G. M., & Paris, J. (2003). Distribution of Dissolved and Colloidal Substances in the Forming and Press Sections of a Paper Machine. Journal of Pulp and Paper Science, 29(9), 294-298. Non disponible

Shafiei, S., Floquet, P., Davin, A., Domenech, S., & Paris, J. (juin 2003). Whitewater network optimization in pulp & paper industry [Communication écrite]. IcheaP 6 : 6th Italian conference on chemical and process engineering, Pisa, Italy. Non disponible

Jacob, J., Viviant, C., Houle, J. F., & Paris, J. (2002). Analyse et optimisation des réseaux d'eau dans les procédés de fabrication des pâtes et papiers : la technique du pincement à l'oeuvre. Pulp & Paper Canada, 103(3), 24-27. Non disponible

Bednar, F., Abdallah, M., Périn-Levasseur, Z., van de Ven, T. G. M., & Paris, J. (janvier 2002). Détermination expérimentale de l'état d'enchevêtrement de l'oxyde de polyethylene en solution [Communication écrite]. Congrès francophone du papier, Québec. Non disponible

Chahbani, M. H., Labidi, J., & Paris, J. (2002). Effect of Mass Transfer Kinetics on the Performance of Adsorptive Heat Pump Systems. Applied Thermal Engineering, 22(1), 23-40. Lien externe

Neuhann, V., Zmeureanu, R., Solati, B., Paris, J., & Haghighat, F. (juin 2002). Life-cycle analysis of refrigeration systems for air-conditioning an office building [Communication écrite]. World Renewable Energy Congress VII (WREC VII), Cologne, Germany. Non disponible

Bonhivers, J. C., Perrier, M., & Paris, J. (2002). Management of broke recirculation in an integrated paper mill. Pulp & Paper Canada, 103(2), 44-49. Non disponible

Bonhivers, J. C., Perrier, M., & Paris, J. (2002). Model Predictive Control for Integrated Management of Whitewater Tanks. Tappi Journal, 1(9), 15-21. Lien externe

Samkocwa, D., Ruiz, J., De Ven, T. G. M. V., & Paris, J. (2002). Modélisation de la rétention des particules fines sur la table plate d'une machine à papier. Journal of Pulp and Paper Science, 28(1), 1-5. Non disponible

Shafiei, S., Domenech, S., Koteles, R., & Paris, J. System closure in an integrated newsprint mill, practical application of the genetic algorithm [Communication écrite]. 88th Annual Meeting Preprints "A". Non disponible

Stuart, P. R., & Paris, J. (janvier 2002). Water management in pulp & paper processes [Communication écrite]. International conference on the fiber industry and environmental biocomplexity, Auburn, Alabama. Non disponible

Jacob, J., Kaipe, H., Couderc, F., & Paris, J. (2002). Water Network Analysis in Pulp and Paper Processes by Pinch and Linear Programming Techniques. Chemical Engineering Communications, 189(2), 184-206. Lien externe

Jacob, J., Hemphala, H., & Paris, J. (2001). Cueillette et réconciliation des données pour la simulation de procédes en opération. Pulp & Paper Canada, 102(5), 53-56. Non disponible

Labidi, J., Chahbani, H., & Paris, J. (mai 2001). Efficacité exergétique des pompes à chaleur à absorption [Communication écrite]. Thermique des systèmes. Colloque universitaire franco-québécois, 5, Lyon, France. Non disponible

Labidi, J., Zmeureanu, R., Solati, B., Haghighat, F., & Paris, J. (mai 2001). Évaluation technico-economique de l'utilisation des pompes à chaleur à absorption au Canada [Communication écrite]. Thermique des systèmes. Colloque universitaire franco-québécois, 5, Lyon, France. Non disponible

Savu, E., Sarrailh, F., Maréchal, F., & Paris, J. (2001). Impact de la fermeture des circuits dans un procédé de désencrage. Pulp & Paper Canada, 155-158. Non disponible

Laidi, J., Mutjé, P., Pèlach, M. A., Turin, X., & Paris, J. (2001). Integración de procesos en fábricas de papel: de la teoría a la prática. El Papel, 80-87. Non disponible

Souza, F. V., van de Ven, T. G. M., & Paris, J. (janvier 2001). Modelizaçao da drenagem e da retencao: Un enFoque em fenômenos de transporte [Communication écrite]. 34th ABTCP annual meeting, Sao Paulo. Non disponible

Shafiei, S., Domenech, S., Floquet, P., & Paris, J. (janvier 2001). Network analysis by genetic algorithm mathematical programming and process simulation [Communication écrite]. TAPPI 2001 Engineering/finishing & converting conf, San Antonio. Lien externe

Orccotoma, J. A., Paris, J., & Perrier, M. (2001). Paper Machine Controllability: Effect of Disturbances on Basis Weight and First-Pass Retention. Journal of Process Control, 11(4), 401-408. Lien externe

Shafiei, S., Domenech, S., Koteles, R., & Paris, J. (mai 2001). System closure in pulp and paper mills: network analysis by genetic algorithm [Communication écrite]. 4th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2001), Florence, Italie. Publié dans Journal of cleaner production, 12(2). Lien externe

Cabos, L., Berrada, M., & Paris, J. (2000). Effect of furnish composition on the color of a fine three-ply paperboard. Tappi Journal, 83(10), 1-16. Lien externe

Kerekes, R., Daneault, C., & Paris, J. (janvier 2000). Balance between needs and educational programs in sciences, the case of the canadian industry [Communication écrite]. 33rd ABCP an. meet. programmes de formation des ressources humaines, Sao Paulo. Non disponible

Bonhivers, J.-C., Perrier, M., & Paris, J. (mai 2000). Management of broke recirculation in an integrated paper mill [Communication écrite]. Control Systems 2000. Quantifying the Benefits of Process Control, Victoria, BC, Canada. Non disponible

Persson, K., Labidi, L., Vera, J. H., & Paris, J. (janvier 2000). Measurement of activity coefficients of lignin in aqueous NaCl solutions [Communication écrite]. 86th ann. meet. PAPTAC book C. Non disponible

Deutsch, B., & Paris, J. (janvier 2000). Mélanges de lois exponentielles et régression PLS pour l'analyse des casses de la feuille dans une machine à papier [Communication écrite]. Actes des 32e journées de statistiques, Fez. Non disponible

Labidi, J., Boulé, E., & Paris, J. (2000). On Intrinsic Exergy Efficiency and Heat Pumps. Chemical Engineering Research & Design, 78(2), 180-183. Lien externe

Paris, J., & Stuart, P. R. (janvier 2000). Process integration applied to system closure in pulp and paper mills [Communication écrite]. International symposium on environmental friendly and emerging technologies for a sustainable pulp & paper industry, Taipei, Taiwan. Non disponible

Paris, J., & Stuart, P. (avril 2000). Process integration applied to system closure in pulp and paper mills [Communication écrite]. International symposium on environment friendly and emerging technologies for a sustainable P&P industry, Taipei. Non disponible

Marino, S., Braker, J., Carrière, M., & Paris, J. (janvier 2000). Recirculation of process and non-process water in an integrated newsprint mill: a case study [Communication écrite]. 33rd ABTCP an. meet. technical session V, Sao Paulo. Non disponible

Donat, V., Paris, J., & Van De Ven, T. G. M. (2000). Simulation of a Paper Machine Twin-Wire Forming Section. Journal of Pulp and Paper Science, 26(8), 284-288. Non disponible

Paris, J. (2000). A Systems Approach to System Closure in Integrated Newsprint Mills. Pulp & Paper Canada, 101(5), 34-42. Non disponible

Labidi, J., Noël, G., Perrier, M., & Paris, J. (1999). Analyse des procédés et optimisation énergétique. Dans Browne, T., & Williamson, P. N. (édit.), Réduction des coûts énergétiques dans l'industrie des pâtes et papiers: une monographie (p. 29-64). Non disponible

Orccotoma, J. A., Paris, J., & Perrier, M. (1999). Dynamic Analysis of Fibrous Material and Dissolved Solids Distribution in the Wet-End of a Newsprint Mill. Appita Journal, 52(2), 105-113. Non disponible

Sorin, M., & Paris, J. (1999). Integrated Exergy Load Distribution Method and Pinch Analysis. Computers & Chemical Engineering, 23(4-5), 497-507. Lien externe

Samkocwa, D., Ruiz, J., van de Ven, T. G. M., & Paris, J. (janvier 1999). Modélisation de la rétention des particules fines sur la table plate d'une machine à papier [Communication écrite]. 85th Annual Meeting of the Pulp and Paper Technical Association of Canada. Non disponible

Donat, V., Vaillancourt, J., Samkocwa, D., van de Ven, T., Ruiz, J., & Paris, J. (octobre 1999). Modélisation du drainage et de la rétention dans une machine à papier [Communication écrite]. 27th EUCEPA Conference, Grenoble, France. Non disponible

Paris, J., & Yelon, A. (1999). Pulp and Paper Research and Education at Polytechnique: a Growing Partnership. Pulp & Paper Canada, 100(5), 35-37. Non disponible

Houle, J. F., Brousseau, Y., Dorica, J., & Paris, J. (1999). Reduction of Fresh Water Consumption for Process and Non- Process Uses in an Integrated Newsprint Mill. Pulp & Paper Canada, 100(3), 50-53. Non disponible

Donat, V., Paris, J., & van de Ven, T. (1999). Simulation of a twin-wire paper machine. Process Control News (for the Pulp and Paper Industries), 19(4), 2-2. Non disponible

Oulidi, A., Deutsch, B., & Paris, J. (1999). Statistical Analysis of Sheet Breaks in a Paper Machine. Pulp & Paper Canada, 100(5), 44-49. Non disponible

Paris, J., Dorica, J., Francis, D. W., & Orccotoma, J. A. (1999). System Closure in Integrated Newsprint Mills: Review of R&D Issues. Pulp & Paper Canada, 100(9), 24-28. Non disponible

Jacob, J., Viviant, C., Houle, J. F., & Paris, J. (janvier 1998). Analyse et optimisation des réseaux d'eau des procédés papetiers [Communication écrite]. 84th Annual Meeting of the Technical Section of Canadian Pulp and Paper Association, Montréal, Québec. Non disponible

Banu, D., Feldman, D., Haghighat, F., Paris, J., & Hawes, D. (1998). Energy-Storing Wallboard: Flammability Tests. Journal of Materials in Civil Engineering, 10(2), 98-105. Lien externe

Sorin, M., Bonhivers, J. C., & Paris, J. (1998). Exergy Efficiency and Conversion of Chemical Reactions. Energy Conversion and Management, 39(16-18), 1863-1868. Lien externe

Sorin, M., Lambert, J., & Paris, J. (1998). Exergy Flows Analysis in Chemical Reactors. Chemical Engineering Research & Design, 76(3), 389-395. Lien externe

Asselman, T., & Paris, J. (1998). Fermeture des circuits d'eau de procédé dans une usine intégrée de fabrication de papier journal : recyclage des effluents du procédé et du biotraitement. ATIP. Association technique de l'industrie papetière, 52(1), 34-40. Non disponible

Tsingakis, D., Labidi, J., & Paris, J. (juin 1998). Modeling of kraft liquors properties and applications to process simulations [Communication écrite]. 1998 International Chemical Recovery Conference, Tampa, FL, USA. Lien externe

Gagnon, C., Samkocwa, D., Vaillancourt, J., Ruiz, J., & Paris, J. (1998). Modélisation de la rétention et validation sur machines à simple et double toile. ATIP. Association technique de l'industrie papetière : (1989), 52(4), 189-194. Non disponible

Paris, J., & Yelon, A. (janvier 1998). Pulp and paper research and education at polytechnique: a growing partnership [Communication écrite]. 84th Annual Meeting of the Technical Section of Canadian Pulp and Paper Association, Montréal, Québec. Non disponible

Houle, J. F., Brousseau, Y., Dorica, J., & Paris, J. (janvier 1998). Reduction of fresh water consumption for process and non-process uses in an integrated newsprint mill [Communication écrite]. 84th Annual Meeting of the Technical Section of Canadian Pulp and Paper Association, Montréal, Québec. Non disponible

Sotudeh-Gharebaagh, R., Legros, R., Chaouki, J., & Paris, J. (1998). Simulation of model circulating fluidized bed reactors using aspen plus. Fuel, 77(4), 327-337. Lien externe

Oulidi, A., & Paris, J. (janvier 1998). Statistical analysis of web breaks on a paper machine [Communication écrite]. 84th Annual Meeting [of the] Technical Section, Cppa. Non disponible

Paris, J., Dorica, J., Francis, D., & Orccotoma, J.-A. (janvier 1998). System closure in integrated newsprint mills: r&d issues [Communication écrite]. 84th Annual Meeting [of the] Technical Section, Cppa. Non disponible

Houle, J.-F., Péters, F., Lacroix, F., & Paris, J. (janvier 1997). Analyse des impacts thermiques de la recirculation des eaux traitées dans une usine de papier journal [Communication écrite]. ACPP, section technique, CTE, Québec. Non disponible

Lambert, J., Sorin, M., & Paris, J. (1997). Analysis of oxygen-enriched combustion for steam methane reforming (smr). Energy, 22(8), 817-825. Lien externe

Sorin, M., & Paris, J. (1997). Combined exergy and pinch approach to process analysis. Computers & Chemical Engineering, 21, S23-S28. Lien externe

Moussaoui, A., Orccotoma, J. A., Paris, J., & Perrier, M. (septembre 1997). Commande prédictive et adaptative d'un réseau d'eaux blanches de procédé intégré de papier journal [Communication écrite]. 6e Congrès français de génie des procédés: Nouvelles frontières du génie des procédés, Paris, France. Publié dans Récents progrès en génie des procédés, 11(56). Non disponible

Orccotoma, J. A., Paris, J., Perrier, M., & Roche, A. A. (1997). Dynamics of white water networks during web breaks. Tappi Journal, 80(12), 101-110. Lien externe

Sorin, M., Bonhivers, J.-C., & Paris, J. (janvier 1997). Exergy efficiency and conversion of chemical reactors [Communication écrite]. Flowers'97- Florence world energy research symp. Non disponible

Lambert, J., Sun, Y., Marino, M., Sorin, M., Paris, J., & Legault, A. (1997). Waste water reduction at a canadian paperboard mill. CADDET newsletter, 2, 17-19. Non disponible

Sorin, J., Paris, J., & Sapundzhiev, C. (janvier 1996). Analyse thermodynamique appliquée au design de réacteurs canalytiques [Communication écrite]. Actes de COMAGEP2, Djerba. Non disponible

Braker, J., Pepin, M., Carrière, M., & Paris, J. Closing the water circuit in an integrated newsprint mill; technical and economic case study [Communication écrite]. Preprints : Summer 1996 : technical conference of the Canadian pulp and paper association. Non disponible

Asselman, T., Sorin, M., & Paris, J. (septembre 1995). Efficacité des techniques de régénération d'eau pour une usine de fabrication de papier intégrée sans effluent. Analyse exergétique [Communication écrite]. Journées européennes de thermodynamique contemporaine (JETC), Nancy, France. Publié dans Revue générale de thermique, 35(418-419). Lien externe

Broderick, G., Paris, J., & Valade, J. L. (1996). Fiber development in chemimechanical pulp refining. Tappi Journal, 79(4), 193-201. Lien externe

Scalat, S., Banu, D., Hawes, D., Paris, J., Haghichat, F., & Feldman, D. (1996). Full scale thermal testing of latent heat storage in wallboard. Solar Energy Materials and Solar Cells, 44(1), 49-61. Lien externe

Broderick, G., Valade, J. L., & Paris, J. (1996). The impact of high-yield pulping pretreatment conditions on spent liquor toxicity and oxygen-demand. Paperi Ja Puu-Paper and Timber, 78(1-2), 43-50. Non disponible

Broderick, G., Paris, J., Valade, J. L., & Wood, J. (1996). Linking the fiber characteristics and handsheet properties of a high-yield pulp. Tappi Journal, 79(1), 161-169. Lien externe

Labidi, J., Tsingakis, D., & Paris, J. (janvier 1996). Modélisation d'un évaporateur multiples effets pour la concentration des liqueurs Kraft sur ASPLEN PLUS [Communication écrite]. Actes de COMAGEP2, Djerba. Non disponible

Paris, J. (janvier 1996). Simulation de procédés complexes à l'aide d'un logiciel modulaire, technique du jeu de construction [Communication écrite]. Actes de COMAGEP2, Djerba. Non disponible

Sorin, M., Sapundzhiev, C., & Paris, J. (juin 1996). Thermodynamic efficiency of conventional vs. flow reversal catalytic reactors [Communication écrite]. Symposium on efficiency, costs optimization, simulation and environmental aspects of energy systems (ECOS), Stockholm (Sweden). Non disponible

Lambert, J., Sorin, M., & Paris, J. (juillet 1996). Thermodynamic efficiency of steam methane reforming with oxygen enriched combustion [Communication écrite]. 5. world congress of chemical engineering, San Diego, CA (United States). Non disponible

Tsingakis, D., Labidi, J., Darroux, M., & Paris, J. (janvier 1996). Thermodynamic modeling of kraft black liquors [Communication écrite]. 5th world cong. of ch. e, San Diego. Non disponible

Orccotoma, J. A., Stiee, D., Paris, J., & Perrier, M. (janvier 1996). Transient fines distribution during broke recirculation in an integrated newsprint mill [Communication écrite]. 1996 82nd Annual Meeting of Technical Section Canadian Pulp and Paper Association, Montréal, Québec. Non disponible

Broderick, G., Paris, J., Valade, J., & Wood, J. (1995). Applying latent vector analysis to pulp&paper characterisation. Paperi ja Puu - Paper and Timber, 77(6-7), 410-408. Non disponible

Gavazzo, G., Valade, J., Law, K., & Paris, J. Behavior of thermomechanical pulps, chemithermomechanical pulps, and chemimechanical pulps of black spruce [picea mariana] during recycling [Communication écrite]. 28e Congresso Anual De Celulose E Papel (Abtcp). Non disponible

Broderick, G., Paris, J., & Valade, J. L. (1995). A composite representation of pulp quality. Chemometrics and Intelligent Laboratory Systems, 29(1), 19-28. Lien externe

Orccotoma, J.-A., Carrière, M., Walosik, S., & Paris, J. Detailed balances using spreadsheets : application to pulp and paper processes [Communication écrite]. Conference Technologique Estivale 1995 (CPPA). Non disponible

Asselman, T., Paris, J., Braker, J., Blackburn, N., & Marino, S. (janvier 1995). Distribution of dissolved solids in the pulp & white water networks of integrated newsprint mills [Communication écrite]. 81st Annual Meeting on Technical Section Canadian Pulp and Paper Association, Montréal, Québec. Non disponible

Scalat, S., Banu, D., Hawes, D., & Paris, J. (janvier 1995). Energy consumption and thermal comfort conditions in buildings using phase change materials [Communication écrite]. ITEC'95, Agadir. Non disponible

Benali, T., Daroux, M., & Paris, J. (janvier 1995). Exergy analysis of an ammonia synthesis process based on an ASPEN PLUS simulation model [Communication écrite]. ITEC'95, Agadir. Non disponible

Leroy, C., Sorin, M., & Paris, J. (janvier 1995). Exergy and pinch analysis of a gas conversion process [Communication écrite]. ITEC'95, Agadir. Non disponible

Sorin, M., & Paris, J. Exergy load redistribution method for multi-step process analysis [Communication écrite]. ASME Annual Meeting, San Francisco, Calif.. Publié dans AES, 35. Non disponible

Sorin, M., & Paris, J. (janvier 1995). Exergy load redistribution methos for multi-step process analysis [Communication écrite]. ASME ann. Meet, San Francisco. Non disponible

Broderick, G., Paris, J., & Valada, J. L. (1995). Factors affecting the optimal performance of a high-yield pulping operation. Canadian Journal of Chemical Engineering, 73(3), 391-399. Lien externe

Labidi, J., Paris, J., & Legoff, P. (janvier 1995). Graphical representation of exergy balance of an absorption heat pump [Communication écrite]. ITEC'95, Agadir. Non disponible

Hawes, D. W., Paris, J., Feldman, D., & Banu, D. (janvier 1995). Heat storage and heat conservation in buildings [Communication écrite]. ITEC'95, Agadir. Non disponible

Sorin, M., Brodyanski, V., & Paris, J. (juin 1995). Novel approach to exergy analysis [Communication écrite]. International Thermal Energy Congress (ITEC), 1995, Agadir. Non disponible

Legros, R., Sotudeh-Gharebaagh, R., Paris, J., & Chaouki, J. (mai 1995). Process simulation of a circulating fluidized bed coal combustor [Communication écrite]. 13th International Conference on Fluidized Bed Combustion, Orlando, FL, USA. Non disponible

Sorin, M., Sapundzhiev, C., & Paris, J. (janvier 1994). Application of a new exergy analysis method to a flow reversal reactor [Communication écrite]. 13th intl. symp. on Chemical reaction engineering, Baltimore. Non disponible

Sorin, M., Sapundzhiev, C., & Paris, J. (1994). Application of a new exergy analysis method to a flow reversal SO₂ convertor. Chemical Engineering Science, 49(24, pt. B), 5603-5613. Lien externe

Broderick, G., Paris, J., & Valade, J. L. (novembre 1994). Fiber development in chemimechanical pulp refining [Communication écrite]. 1994 Pulping Conference. Non disponible

Hosatte, D. S., Sorin, M., Génois, J., Lafrance, G., Asselman, T., & Paris, J. (janvier 1993). Gestion de l'énergie thermique dans le secteur agro-alimentaire par des PACC [Communication écrite]. Heat pumps in cold climates/Proceed. Caneta research ed, Moncton/Mississauga. Lien externe

Carreau, P., Paris, J., & Guérin, P. (1994). Heat transfer to newtonian and non-newtonian liquids in a screw agitator and draft coil system. Canadian Journal of Chemical Engineering, 72(6), 966-974. Lien externe

Broderick, G., Paris, J., & Valade, J. L. (février 1994). Monitoring composite pulp quality [Communication écrite]. 80th annual meeting of the Canadian pulp and paper association. Non disponible

Labidi, J., Paris, J., & Le Goff, P. (1994). New concept in gas-fired heat pump reversed rectification heat pump. Renewable Energy, 5(5-8), 1235-1239. Lien externe

Sorin, M., Brodyansky, V., & Paris, J. (janvier 1994). Observations on exergy efficiency coefficients [Communication écrite]. Florence world energy research symposium - flowers'94, Florence. Non disponible

Houle, J.-F., & Paris, J. (1994). Process for incorporation of a phase change material into gypsum wallboards and other aggregate construction panels. (Brevet no CA1332683). Lien externe

Sorin, M., Le Goff, P., Paris, J., & Galatone, V. (1994). Thermodynamic efficiency of sorption heat pumps. Renewable Energy, 5(1-4), 412-414. Lien externe

Sorin, M. V., Paris, J., & Brodyansky, V. M. (novembre 1994). Thermodynamic evaluation of a distillation [Communication écrite]. 1994 International Mechanical Engineering Congress and Exposition, Chicago, IL, USA. Non disponible

Labidi, J., Legoff, P., & Paris, J. (janvier 1994). Une thermofrigopompe à absorption pour la production simultanée de fraicheur et de chaleur utiles [Communication écrite]. International conference, CFCs, the day after, Padoue. Lien externe

Paris, J., & Jolly, R. (1989). Observations sur le comportement à la fusion-solidification du chlorure de calcium hexahydrate. Thermochimica Acta, 152(2), 271-278. Lien externe

Faucher, G., Godin, A., Jalbert, G., O'Shea, J., & Paris, J. (1984). Les travaux pratiques de laboratoire dans I'enseignement de I'ingénierie: comment en sont-ils venus ou ils en sont? European Journal of Engineering Education, 8(4), 345-356. Lien externe

Lortie, R., Klvana, D., & Paris, J. (1983). Isothermes d'adsorption de l'ion chromique sur l'hydroxyde de titane fraîchement précipité. Canadian Journal of Chemical Engineering, 61(4), 548-553. Lien externe

Liste produite: Fri Dec 20 05:17:27 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0