<  Back to the Polytechnique Montréal portal

Items where Author is "Favis, Basil D."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | E | F | G | H | J | L | M | O | P | R | S | T | V | W | X | Y | Z
Number of items: 242.

A

Arroyo, O. H., Huneault, M. A., Favis, B. D., & Bureau, M. (2010). Processing and properties of PLA/Thermoplastic starch/Montmorillonite nanocomposites. Polymer Composites, 31(1), 114-127. External link

B

Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M. D., & Favis, B. D. (2014). Enhancement in interfacial reactive compatibilization by chain mobility. Polymer (United Kingdom), 55(16), 3905-3914. External link

Bhadane, P. A., Cheng, J., Ellul, M. D., & Favis, B. D. (2012). Decoupling of reactions in reactive polymer blending for nanoscale morphology control. Journal of Polymer Science, Part B: Polymer Physics, 50(23), 1619-1629. External link

Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M., & Favis, B. D. (2011). Morphology and continuity development in highly reactive nanoscale polymer blends. Polymer, 52(22), 5107-5117. External link

Bhadane, P. A., Tsou, A. H., Cheng, J., & Favis, B. D. (2008). Morphology Development and Interfacial Erosion in Reactive Polymer Blending. Macromolecules, 41(20), 7549-7559. External link

Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Continuity Development in Polymer Blends of Very Low Interfacial Tension. Polymer, 47(8), 2760-2771. External link

Bhadane, P. A., Virgilio, N., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. (2006). Effect of Dynamic Vulcanization on Co-Continuous Morphology. AICHE Journal, 52(10), 3411-3420. External link

Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension. Journal of polymer science. Part B, Polymer physics, 44(14), 1919-1929. External link

Bhadane, P., Favis, B. D., Huneault, M. A., Champagne, M., & Tofan, F. (2005, May). Erosion and continuity development in high viscosity ratio epdm/pp blends [Paper]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. External link

Bhadane, P. A., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. Effect of viscosity ratio on co-continuity for ethylene-propylene-diene terpolymer/polypropylene blends [Paper]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. External link

Bourry, D., & Favis, B. D. (1998). Cocontinuity and Phase Inversion in HDPE/PS Blends: Influence of Interfacial Modification and Elasticity. Journal of polymer science. Part B, Polymer physics, 36(11), 1889-1899. External link

Bourry, D., & Favis, B. D. (1998). Morphology Development in a Polyethylene/Polystyrene Binary Blend During Twin-Screw Extrusion. Polymer, 39(10), 1851-1856. External link

Bourry, D., & Favis, B. D. (1996, January). Development of the morphology of an immiscible binary blend during twin-srew extrusion [Paper]. 12th annual meeting of the polymer processing society, Sorrento, Italy. Unavailable

Bourry, D., & Favis, B. D. (1995, May). Co-continuity and phase inversion in HDPE/PS blends: the role of interfacial modification [Paper]. 53rd Annual Technical Conference, Boston, MA, USA. Unavailable

Bélanger, C., Cielo, P., Favis, B. D., Patterson, W. I., & Utracki, L. A. (1994). Polarized light scattering approach for simulated polymer blend morphology characterization. Polymer Engineering and Science, 34(21), 1589-1589. External link

C

Comtois, E., Dubois, C., & Favis, B. D. (2022). Linear burning rate of double base propellant containing Azidodeoxycellulose. Journal of Energetic Materials, 40(2), 136-152. External link

Comtois, E., Favis, B. D., & Dubois, C. (2021). Linear Burning Rate and Erosivity Properties of Nitrocellulose Propellant Formulations Plasticized by Glycidyl Azide Polymer and Nitroglycerine. Propellants, Explosives, Pyrotechnics, 46(3), 494-504. External link

Comtois, E., Favis, B. D., & Dubois, C. (2020). Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine. Polymer Engineering and Science, 60(9), 2301-2313. External link

Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2017). Choice of land reference situation in life cycle impact assessment. International Journal of Life Cycle Assessment, 22(8), 1220-1231. External link

Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2015). Aggregated indicator to assess land use impacts in life cycle assessment (LCA) based on the economic value of ecosystem services. Journal of Cleaner Production, 94, 56-66. External link

Cercle, C., Sarazin, P., & Favis, B. D. (2013). High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. Carbohydrate Polymers, 92(1), 138-148. External link

Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2012, May). Development of an integrated indicator for land use based on ecosystem services [Abstract]. 6th SETAC World Congress/SETAC Europe 22nd Annual Meeting, Berlin, Germany. Unavailable

Cercle, C., & Favis, B. D. (2012). Generalizing interfacial modification in polymer blends. Polymer (United Kingdom), 53(20), 4338-4343. External link

Chapleau, N., Favis, B. D., & Carreau, P. (2000). Measuring the Interfacial Tension of Polyamide/Polyethylene and Polycarbonate/Polypropylene Blends: Effect of Temperature. Polymer, 41(17), 6695-6698. External link

Chapleau, N., Favis, B. D., & Carreau, P. (1998). Measuring the Interfacial Tension of Polymers in the Presence of an Interfacial Modifier: Migrating the Modifier to the Interface. Journal of polymer science. Part B, Polymer physics, 36(11), 1947-1958. External link

Cigana, P., & Favis, B. D. (1998). Relative Efficacy of Diblock and Triblock Copolymers for a Polystyrene/Ethylene-Propylene Rubber Interface. Polymer, 39(15), 3373-3378. External link

Cigana, P., Benoit, V., Tremblay, A., & Favis, B. D. (1997, April). Detection of block copolymer micelles in compatibilized polymer blends: An indirect method [Paper]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. External link

Chapleau, N., Favis, B. D., & Carreau, P. (1997, April). Morphology of polyamide/polyethylene blends under extensional flow: Effect of compatibilization [Paper]. 55th Annual Technical Conference (ANTEC 1997), Toronto, Can. External link

Cigana, P., Favis, B. D., Albert, C., & Vu-Khanh, T. (1997). Morphology-interface-property relationships in polystyrene/ethylene-propylene rubber blends. 1. Influence of triblock copolymer interfacial modifiers. Macromolecules, 30(14), 4163-4169. External link

Cigana, P., Favis, B. D., & Jerome, R. (1996). Diblock copolymers as emulsifying agents in polymer blends: influence of molecular weight, architecture, and chemical composition. Journal of polymer science. Part B, Polymer physics, 34(9), 1691-1700. External link

Cigana, P., Favis, B. D., & Jerome, R. (1995). Effect of molecular weight and architecture of the compatibilizing agent on the emulsification of polystyrene/ethylene-propylene rubber blends. Polymeric Materials Science and Engineering, 73, 16-17. Unavailable

Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial tension using the breaking thread method: Effect of temperature and of interfacial modifier. Polymeric Materials Science and Engineering, 73, 18-19. Unavailable

Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial-tension using the breaking thread method - effect of temperature and ot interfacial modifier. Abstracts of Papers of the American Chemical Society, 210, 10-10. Unavailable

E

El Ouassini, A., Saucier, A., Marcotte, D., & Favis, B. D. (2008). A Patchwork Approach to Stochastic Simulation: a Route Towards the Analysis of Morphology in Multiphase Systems. Chaos, Solitons & Fractals, 36(2), 418-436. External link

Everaert, V., Groeninckx, G., Pionteck, J., Favis, B. D., Aerts, L., Moldenaers, P., & Mewis, J. (2000). Miscible PS/PPE Compounds: an Alternative for Blend Phase Morphology Studies? Influence of the PPE Content on the Surface Tension of PS/PPE and on the Interfacial Tension in PP/(PS/PPE) and Pom/(PS/PPE) Blends. Polymer, 41(3), 1011-1025. External link

F

Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2020). Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(epsilon-caprolactone) ternary blends with partial wetting morphology. Polymer Crystallization, 3(6), e10145 (13 pages). External link

Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2020). Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(epsilon-caprolactone). Macromolecules, 53(5), 1726-1735. External link

Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2019). Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends. Thermochimica Acta, 677, 117-130. External link

Favis, B. D., & Le Corroller, P. (2017). Polymeric material and process for recycling plastic blends. (Patent no. US9670344). External link

Favis, B. D., Sarazin, P., Li, J., & Yuan, Z. (2011). Microporous articles comprising biodegradable medical polymers, method of preparation thereof and method of use thereof. (Patent no. US8007823). External link

Favis, B. D., Sarazin, P., & Roy, X. (2007). Porous nanosheath networks, method of making and uses thereof. (Patent Application no. WO2007053955). External link

Favis, B. D., Yuan, Z., & Riscanu, D. (2006). Thermoplastic starch and synthetic polymer blends and method of making. (Patent Application no. WO2006116861). External link

Favis, B. D., Rodriguez, F., & Ramsay, B. A. (2005). Method of making polymer compositions containing thermoplastic starch. (Patent no. US6844380). External link

Favis, B. D., Rodriguez, F., & Ramsay, B. A. (2003). Polymer compositions containing thermoplastic starch. (Patent no. US6605657). External link

Favis, B. D., Cigana, P., Matos, M., & Tremblay, A. (1997). Factors influencing the efficacy of an interfacial modifier for the interface in an immiscible polymer blend. Canadian Journal of Chemical Engineering, 75(2), 273-281. External link

Fellahi, S., Favis, B. D., & Fisa, B. (1996). Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends. Polymer, 37(13), 2615-2626. External link

Fellahi, S., Favis, B. D., & Fisa, B. (1995). Tensile dilatometry of injection-moulded HDPE/PA6 blends. Journal of Materials Science, 30(21), 5522-5530. External link

Fellahi, S., Fisa, B., & Favis, B. D. (1995). Weldline strength in injection molded HDPE/PA6 blends: influence of interfacial modification. Journal of Applied Polymer Science, 57(11), 1319-1332. External link

Fellahi, S., Meddad, A., Fisa, B., & Favis, B. D. (1995). Weldlines in injection-molded parts: a review. Advances in Polymer Technology, 14(3), 169-195. External link

Favis, B. D., Matos, M., Tremblay, A., & Lepers, J.-C. (1994, January). Interface/morphology relationships in polymer blends [Paper]. Polymer processing society, European regional meeting, Strasbourg, France. Unavailable

Favis, B. D. (1994). Phase size/interface relationships in polymer blends: The emulsification curve. Polymer, 35(7), 1552-1555. External link

Fellahi, S., Favis, B. D., & Fisa, B. (1994, May). Tensile dilatometry of injection molded HDPE/PA6 blends [Paper]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Unavailable

Fellahi, S., Fisa, B., & Favis, B. D. (1994, May). Weldline strength evaluation in injection molded HDPE/PA6 blends [Paper]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Unavailable

Favis, B. D. (1992). Processing/morphology/rheology relationships in polymer blends. Die makromolekulare Chemie, 56(1), 143-150. External link

G

Gancheva, T., Li, Y., Pilon, D., Gauthier, M., Akbarzadeh, A., & Favis, B. D. (2022). Post-extrusion process for the robust preparation of highly uniform multiphase polymeric 3D printing filaments. Polymer Engineering and Science, 62(1), 66-74. External link

Gazil, O., Gancheva, T., Bilodeau-Calame, M., Favis, B. D., & Virgilio, N. (2020). Controlling the distribution of nanoparticles in hydrogels via interfacial synthesis. Nanoscale Advances, 2(11), 5263-5270. External link

Ghavidel Mehr, N., Hoemann, C. D., & Favis, B. D. (2015). Chitosan surface modification of fully interconnected 3D porous poly(-caprolactone) by the LbL approach. Polymer (United Kingdom), 64, 112-121. External link

Ghavidel Mehr, N., Li, X., Ariganello, M. B., Hoemann, C. D., & Favis, B. D. (2014). Poly(-caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior. Journal of Materials Science: Materials in Medicine, 25(9), 2083-2093. External link

Gang, L., Sarazin, P., Zhenhua, Y., & Favis, B. D. (2005, May). Morphology and rheology of polycaprolactone/thermoplastic starch blends [Paper]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. External link

González-Nuñez, R., Padilla, H., De Kee, D., & Favis, B. D. (2001). Barrier Properties of Polyamide-6/High Density Polyethylene Blends. Polymer Bulletin, 46(4), 323-330. External link

Gonzalez-Nunez, R., Arellano, M., Moscoso, F. J., Gonzalez-Romero, V. M., & Favis, B. D. (2001). Determination of a Limiting Dispersed Phase Concentration for Coalescence in Pa6/Hdpe Blends Under Extensional Flow. Polymer, 42(12), 5485-5489. External link

Gonzalez-Nunez, R., Moscoso, F. J., Gonzalez-Romero, V. M., & Favis, B. D. (2000, May). Determination of a limit in particle concentration for coalescence in pa6/hdpe blends under extensional flow [Paper]. Antec 2000, Orlando, FL. External link

Gonzalez, F. J. R., Ramsay, B. A., & Favis, B. D. Low density polyethylene/thermoplastic starch blends: effect of glycerol content and LDPE concentration on morphology and tensile properties in the dual phase continuity region [Paper]. ANTEC : Annual Technical Conference. Society of Plastics Engineers. External link

Gaona-Torres, J., Gonzalez-Nunez, R., & Favis, B. D. (1997, April). Influence of melt-drawn ratio and composition on drop coalescence in nylon 6/hdpe blends [Paper]. Antec 97. Volume II, Toronto. External link

Gonzalez-Nunez, R., Chan Man Fong, C. F., Favis, B. D., & De Kee, D. (1996). Deformation of drops in extensional viscoelastic flow. Journal of Applied Polymer Science, 62(10), 1627-1634. External link

Gonzalez-Nunez, R., De Kee, D., & Favis, B. D. (1996). The influence of coalescence on the morphology of the minor phase in melt-drawn polyamide-6/HDPE blends. Polymer, 37(21), 4689-4693. External link

Gonzalez-Nunez, R., DeKee, D., & Favis, B. D. (1995, May). Experimental study of deformation and coalescence effects of the minor phase in immiscible polymer blends [Paper]. Antec '95. Vol.II, Boston, Ma. Unavailable

H

Hoemann, C. D., Rodríguez González, J. R., Guzmán-Morales, J., Chen, G., Jalali Dil, E., & Favis, B. D. (2022). Chitosan coatings with distinct innate immune bioactivities differentially stimulate angiogenesis, osteogenesis and chondrogenesis in poly-caprolactone scaffolds with controlled interconnecting pore size. Bioactive Materials, 10, 430-442. Available

Huang, Y., Gancheva, T., Favis, B. D., Abidli, A., Wang, J., & Park, C. B. (2021). Hydrophobic Porous Polypropylene with Hierarchical Structures for Ultrafast and Highly Selective Oil/Water Separation. ACS Applied Materials & Interfaces, 13(14), 16859-16868. External link

Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Cellulose nanocrystal in poly(lactic acid)/polyamide11 blends: Preparation, morphology and co-continuity. European Polymer Journal, 98(Supplement), 11-20. External link

Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends. Journal of Polymer Science, Part B: Polymer Physics, 56(7), 576-587. External link

Heshmati, V., & Favis, B. D. (2017). High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility. Polymer, 123, 184-193. External link

Heshmati, V., Zolali, A. M., & Favis, B. D. (2017). Morphology development in poly (lactic acid)/polyamide11 biobased blends: chain mobility and interfacial interactions. Polymer, 120, 197-208. External link

Heshmati, V., Kamal, M. R., & Favis, B. D. (2014, April). Poly (Lactic acid)/Polyamide11/Cellulose Multiphase Systems [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. External link

J

Jalali Dil, E., Arjmand, M., Otero Navas, I., Sundararaj, U., & Favis, B. D. (2020). Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity. Macromolecules, 52(22), 10267-10277. External link

Jegat, C., Virgilio, N., & Favis, B. D. (2017). Self-assembly of oil microdroplets at the interface in co-continuous polymer blends. European Polymer Journal, 93, 259-271. External link

Jalali Dil, E., Arjmand, M., Li, Y., Sundararaj, U., & Favis, B. D. (2016). Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends. European Polymer Journal, 85, 187-197. External link

Jalali Dil, E., Virgilio, N., & Favis, B. D. (2016). The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on the morphology, rheology and mechanical properties. European Polymer Journal, 85, 635-646. External link

Jegat, C., Virgilio, N., & Favis, B. D. (2015, November). Design d'une interface hydrophile/hydrophobe dans un matériau polymère à réservoirs lipidiques [Presentation]. In 44e Colloque national du Groupe français d'études et d'applications des polymères, Belvaux, Luxembourg. Unavailable

Jalali Dil, E., & Favis, B. D. (2015). Localization of micro and nano- silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system. Polymer, 77, 156-166. External link

Jalali Dil, E., & Favis, B. D. (2015). Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 76, 295-306. External link

Jalali Dil, E., Carreau, P., & Favis, B. D. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212. External link

Jalali Dil, E., & Favis, B. D. (2014, April). Effect of the localization of silica particles on the morphology of poly(lactic acid)/polyethylene blends [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. External link

Jalali Dil, E., Carreau, P., Ravati, S., & Favis, B. D. (2012, April). Morphology of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and its composite with spherical silica particles [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. External link

Jalali Dil, E., & Favis, B. D. (2012, April). Selective localization of spherical silica particles in heterophase poly(lactic acid)/ low density polyethylene blends [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012), Orlando, FL, United states. External link

Jianming, L., Ma, P. L., & Favis, B. D. (2002). The role of the blend interface type on morphology in cocontinuous polymer blends. Macromolecules, 35(6), 2005-2016. External link

Jack, K. S., Natansohn, A., Jiahu, W., Favis, B. D., & Cigana, P. (1998). Determination of domain sizes in compatibilized polystyrene(ps)-(ethylene-propylene rubber)(epr) blends by measurements of proton spin diffusion. Chemistry of Materials, 10(5), 1301-1308. External link

L

Li, Y., Gancheva, T., Estakhrianhaghighi, E., Favis, B. D., & Akbarzadeh, A. (2023, May). Tough 3D printed biopolymeric cellular beams [Abstract]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Published in Progress in Canadian Mechanical Engineering, 6. External link

Li, Y., Gancheva, T., Estakhrianhaghighi, E., Favis, B. D., & Akbarzadeh, A. (2023). Material extrusion of quaternary co-continuous biopolymers: A strategy for realizing lightweight cellular solids with high impact toughness. Additive Manufacturing, 77, 103805 (15 pages). External link

Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. External link

Liberelle, B., Jalali Dil, E., Sabri, F., Favis, B. D., De Crescenzo, G., & Virgilio, N. (2021). Immobilizing enzyme biocatalysts onto porous polymer monoliths prepared from cocontinuous polymer blends. ACS Applied Polymer Materials, 3(12), 6359-6365. External link

Li, X., Ghavidel Mehr, N., Guzman-Morales, J., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (2017). Cationic osteogenic peptide P15-CSP coatings promote 3-D osteogenesis in poly(epsilon-caprolactone) scaffolds of distinct pore size. Journal of Biomedical Materials Research Part A, 105(8), 2171-2181. External link

Li, X., Mehr, N. G., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (2016, August). Fusion peptide P15-CSP coatings promote in vitro osteogenesis in 84 and 141 micron pores of 3-D poly(epsilon-caprolactone) scaffolds [Paper]. 25th International Materials Research Congress (IMRC 2016), Cancún, Mexico. Unavailable

Le Corroller, P., & Favis, B. D. (2012). Droplet-in-droplet polymer blend microstructures: A potential route toward the recycling of co-mingled plastics. Macromolecular Chemistry and Physics, 213(19), 2062-2074. External link

Li, G., Sarazin, P., Orts, W. J., Imam, S. H., & Favis, B. D. (2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology. Macromolecular Chemistry and Physics, 212(11), 1147-1154. External link

Li, G., Sarazin, P., & Favis, B. D. (2011, May). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology [Paper]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. External link

Le Corroller, P., & Favis, B. D. (2011). Effect of viscosity in ternary polymer blends displaying partial wetting phenomena. Polymer, 52(17), 3827-3834. External link

Li, G., & Favis, B. D. (2010, May). Morphology development and interfacial interactions in polycaprolactone/ thermoplastic starch blends [Paper]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA. External link

Li, G., & Favis, B. D. (2010). Morphology development and interfacial interactions in polycaprolactone/ thermoplastic-starch blends. Macromolecular Chemistry and Physics, 211(3), 321-333. External link

Li, G., Sarazin, P., & Favis, B. D. (2008). The Relationship Between Starch Gelatinization and Morphology Control in Melt-Processed Polymer Blends With Thermoplastic Starch. Macromolecular Chemistry and Physics, 209(10), 991-1002. External link

Li, J., & Favis, B. D. (2002). Strategies to measure and optimize the migration of the interfacial modifier to the interface in immiscible polymer blends. Polymer, 43(18), 4935-4945. External link

Li, J., & Favis, B. D. (2001). Characterizing Co-Continuous High Density Polyethylene/Polystyrene Blends. Polymer, 42(11), 5047-5053. External link

Li, J., Ma, P. L., & Favis, B. D. (2001, January). Role of the blend interface type on morphology in co-continous polymer blends [Paper]. PPS-17, Montréal, Québec. Unavailable

Li, J., Ma, P., & Favis, B. D. Co-continuous homopolymer/copolymer blends [Paper]. ANTEC : Annual Technical Conference. Society of Plastics Engineers. External link

Lepers, J.-C., Favis, B. D., & Kent, S. L. (2000). Interface-property relationships in biaxially stretched PP-PET blends. Polymer, 41(5), 1937-1946. External link

Liang, H., Xu, R., Favis, B. D., & Schreiber, H. P. (2000). Interfacial tension and acid-base approaches to polymer interactions. Journal of polymer science. Part B, Polymer physics, 38(16), 2096-2104. External link

Li, J., & Favis, B. D. (1999, May). Characterising co-continuous polyethylene/polystyrene blends [Paper]. Antec '99. 57th Annual Technical Conference, New-York, NY. External link

Liang, H., Favis, B. D., Yu, Y. S., & Eisenberg, A. (1999). Correlation Between the Interfacial Tension and Dispersed Phase Morphology in Interfacially Modified Blends of Lldpe and Pvc. Macromolecules, 32(5), 1637-1642. External link

Lepers, J. C., Favis, B. D., & Lacroix, C. (1999). The influence of partial emulsification on coalescence suppression and interfacial tension reduction in PP/PET blends. Journal of polymer science. Part B, Polymer physics, 37(9), 939-951. External link

Lacasse, C., & Favis, B. D. (1999). Interface/morphology/property relationships in polyamide-6/ABS blends. Advances in Polymer Technology, 18(3), 255-265. External link

Lepers, J. C., & Favis, B. D. (1999). Interfacial Tension Reduction and Coalescence Suppression in Compatibilized Polymer Blends. AICHE Journal, 45(4), 887-895. External link

Lepers, J.-C., Favis, B. D., & Kent, S. L. Study of the morphology and the tensile mechanical properties of biaxially oriented PET/PP blends [Paper]. Imaging and Image Analysis Applications for Plastics. External link

Liang, H., Xu, R. J., Favis, B. D., & Schreiber, H. P. (1999). Surface Modification Strategies for Multicomponent Polymer Systems - VI: Acid-Base Interactions as a Strategy for Interfacial Modification in Immiscible Polymer Blends. Polymer, 40(15), 4419-4423. External link

Lacasse, C., & Favis, B. D. (1997, October). Effects of extruder type, compatibilizer level and composition on the morphology and impact strength of a polyamide-6/ABS blend [Paper]. 1997 International Symposium on Polymer Blends, Alloys and Filled Systems, POLYBLENDS, Boucherville, Can. Unavailable

Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1997). Morphology modification by interfacial chemical reaction in a polyester/ethylene vinyl acetate/polyethylene blend. Polymer, 38(20), 5085-5089. External link

Lepers, J.-C., Favis, B. D., & Tabar, R. J. (1997). The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends. Journal of polymer science. Part B, Polymer physics, 35(14), 2271-2280. External link

Lepers, J.-C., Favis, B. D., & Kent, S. L. (1997, April). Study of the morphology and the tensile mechanical properties of biaxially oriented PET/PP blends [Paper]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. External link

Liang, H., Favis, B. D., Yu, Y., & Eisenberg, A. (1997, April). Surface modification strategies for multi-component polymer systems, IV: Block copolymers as interfacial modifiers for blends of LLDPE and PVC [Paper]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. External link

Liang, H., & Favis, B. D. (1997). Surface modification strategies for multicomponent polymer systems. 2. Study of the interfacial tension and morphology of linear low-density polyethylene/poly(vinyl chloride) blends. Industrial & Engineering Chemistry Research, 36(4), 1211-1217. External link

Lomellini, P., Matos, M., & Favis, B. D. (1996). Interfacial modification of polymer blends : the emulsification curve : 2. Predicting the critical concentration of interfacial modifier from geometrical considerations. Polymer, 37(25), 5689-5694. External link

Lacroix, C., Bousmina, M., Carreau, P., Favis, B. D., & Michel, A. (1996). Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties. Polymer, 37(14), 2939-2947. External link

Leclair, A., & Favis, B. D. (1996). Role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties. Polymer, 37(21), 4723-4728. External link

Lepers, J.-C., & Favis, B. D. (1995, May). Morphology/interface relationships in polyester/polyolefin blends [Paper]. 53rd Annual Technical Conference, Boston, MA, USA. Unavailable

Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1994). Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties. Polymer, 35(4), 758-764. External link

M

Mehr, N. G., Li, X., Chen, G., Favis, B. D., & Hoemann, C. D. (2015). Pore size and LbL chitosan coating influence mesenchymal stem cell in vitro fibrosis and biomineralization in 3D porous poly(epsilon-caprolactone) scaffolds. Journal of Biomedical Materials Research - Part A, 103(7), 2449-2459. External link

Mihai, M., Huneault, M. A., & Favis, B. D. (2010). Rheology and extrusion foaming of chain-branched poly(lactic acid). Polymer Engineering and Science, 50(3), 629-642. External link

Mihai, M., Huneault, M. A., & Favis, B. D. (2009, June). Crystallinity development in cellular poly (lactic acid) in the presence of supercritical carbon dioxide [Paper]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. External link

Mihai, M., Huneault, M. A., & Favis, B. D. (2009). Crystallinity development in cellular poly(lactic acid) in the presence of supercritical carbon dioxide. Journal of Applied Polymer Science, 113(5), 2920-2932. External link

Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. B. (2007). Extrusion Foaming of Semi-Crystalline Pla and Pla/Thermoplastic Starch Blends. Macromolecular Bioscience, 7(7), 907-920. External link

Mihai, M., Huneault, M. A., & Favis, B. D. (2007). Foaming of Polystyrene/Thermoplastic Starch Blends. Journal of Cellular Plastics, 43(3), 215-236. External link

Mihai, M. H., Huneault, M. A., & Favis, B. D. (2005, May). Foams extruded from polystyrene / thermoplastic starch blends [Paper]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. External link

Marin, N., & Favis, B. D. (2002). Co-Continuous Morphology Development in Partially Miscible Pmma/Pc Blends. Polymer, 43(17), 4723-4731. External link

Ma, P. L., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. (2002). Effect of dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends. Polymer Engineering and Science, 42(10), 1976-1989. External link

Marin, N., & Favis, B. D. (2001, January). Co-continuous morphology development in partially miscible binary polymer blends [Paper]. PPS-17, Montréal, Québec. Unavailable

Ma, P. L., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. Effect of compatibilization and dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends [Paper]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. External link

Martin, P., Carreau, P., Favis, B. D., & Jérôme, R. (2000). Investigating the morphology/rheology inter-relationships in immiscible polymer blends. Journal of Rheology, 44(3), 568-583. External link

Mekhilef, N., Carreau, P., Favis, B. D., Martin, P., & Ouhlal, A. (2000). Viscoelastic Properties and Interfacial Tension of Polystyrene- Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 38(10), 1359-1368. External link

Mamat, A., Vukhanh, T., Cigana, P., & Favis, B. D. (1997). Impact fracture behavior of nylon-6/abs blends. Journal of polymer science. Part B, Polymer physics, 35(16), 2583-2592. External link

Mekhilef, N., Favis, B. D., & Carreau, P. (1997). Morphological stability, interfacial tension, and dual-phase continuity in polystyrene-polyethylene blends. Journal of polymer science. Part B, Polymer physics, 35(2), 293-308. External link

Matos, M. E., Rosales, C., Mueller, A. J., & Favis, B. D. (1997, April). Polystyrene/polypropylene blends: morphology/interphase relationship, rheological and calorimetric behaviour [Paper]. Antec 97. Volume II, Toronto. External link

Mekhilef, N., Carreau, P., & Favis, B. D. (1996, January). Viscoelastic properties of polystyrene-polyethylene blends: interfacial tension measurements using the breaking thread method and predictions with an emulsion model [Paper]. 12th Annual Meeting of the Polymer Processing Society, Sorrento, Italy. Unavailable

Matos, M., Favis, B. D., & Lomellini, P. (1995). Interfacial modification of polymer blends--the emulsification curve. I. Influence of molecular weight and chemical composition of the interfacial modifier. Polymer, 36(20), 3899-3907. External link

Mekhilef, N., Favis, B. D., & Carreau, P. (1995, May). Morphological stability of polystyrene polyethylene blends [Paper]. 53rd Annual Technical Conference, Boston, MA, USA. Unavailable

Matos, M., Lomellini, P., & Favis, B. D. (1994, May). Influence of some molecular parameters of the interfacial modifier on the emulsification of polystyrene/ethylene-propylene rubber blends [Paper]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Unavailable

O

Odje, S., Vu-Khanh, T., Cigana, P., & Favis, B. D. (1999). Influence of Triblock Copolymer Interfacial Modifiers on Fracture Behavior of Polystyrene/Ethylene-Propylene Rubber Blends. Polymer Engineering and Science, 39(7), 1265-1278. External link

P

Polizu, S., Favis, B. D., & Vu-Khanh, T. (1999). Morphology-Interface-Property Relationships in Polystyrene/Ethylene-Propylene Rubber Blends. 2. Influence of Areal Density and Interfacial Saturation of Diblock and Triblock Copolymer Interfacial Modifiers. Macromolecules, 32(10), 3448-3456. External link

R

Rizvi, A., Park, C. B., & Favis, B. D. (2015). Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils. Polymer (United Kingdom), 68, 83-91. External link

Ravati, S., Beaulieu, C., Zolali, A. M., & Favis, B. D. (2014). High performance materials based on a self-assembled multiple-percolated ternary blend. AICHE Journal, 60(8), 3005-3012. External link

Ravati, S., Poulin, S., Piyakis, K., & Favis, B. D. (2014). Phase identification and interfacial transitions in ternary polymer blends by ToF-SIMS. Polymer, 55(23), 6110-6123. External link

Ravati, S., & Favis, B. D. (2013). Interfacial Coarsening of Ternary Polymer Blends With Partial and Complete Wetting Structures. Polymer, 54(25), 6739-6751. External link

Ravati, S., & Favis, B. D. (2013). Tunable morphologies for ternary blends with poly(butylene succinate): Partial and complete wetting phenomena. Polymer (United Kingdom), 54(13), 3271-3281. External link

Ravati, S., Beaulieu, C., Deschênes, L., Cao, V., & Favis, B. D. (2012, April). Multi-component bio-based blends with polylactic acid and polyhydroxybutyrate: Morphology and physical properties [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. External link

Ravati, S., & Favis, B. D. (2012, April). Multicomponent biodegradable blends with poly(butylene succinate): Partial and complete wetting phenomena [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. External link

Ravati, S., & Favis, B. D. (2011). 3D porous polymeric conductive material prepared using LbL deposition. Polymer, 52(3), 718-731. External link

Ravati, S., & Favis, B. D. (2010). Low percolation threshold conductive device derived from a five-component polymer blend. Polymer, 51(16), 3669-3684. External link

Ravati, S., & Favis, B. D. (2010). Morphological states for a ternary polymer blend demonstrating complete wetting. Polymer, 51(20), 4547-4561. External link

Ravati, S., Virgilio, N., Jianhing, Z., & Favis, B. D. (2007, August). Structured multiple percolated polymer blends [Paper]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA. Unavailable

Roy, X., Sarazin, P., & Favis, B. D. (2006). Ultraporous nanosheath materials by layer-by-layer deposition onto co-continuous polymer-blend templates. Advanced Materials, 18(8), 1015-1019. External link

Rodriguez-Gonzales, F. J., Ramsay, B. A., & Favis, B. D. (2004). Rheological and thermal properties of thermoplastic starch with high glycerol content. Carbohydrate polymer, 58(2), 139-147. External link

Riscanu, D., Favis, B. D., Feng, C. Y., & Matsuura, T. (2004). Thin-Film Membranes Derived From Co-Continuous Polymer Blends: Preparation and Performance. Polymer, 45(16), 5597-5609. External link

Reignier, J., & Favis, B. D. (2003). Core-Shell Structure and Segregation Effects in Composite Droplet Polymer Blends. AICHE Journal, 49(4), 1014-1023. External link

Reignier, J., Favis, B. D., & Heuzey, M.-C. (2003). Factors Influencing Encapsulation Behavior in Composite Droplet-Type Polymer Blends. Polymer, 44(1), 49-59. External link

Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003). High performance LDPE/thermoplastic starch blends: A sustainable alternative to pure polyethylene. Polymer, 44(5), 1517-1526. External link

Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. D. (2003). Influence of Melt Drawing on the Morphology of One- and Two-Step Processed Ldpe/Thermoplastic Starch Blends. Advances in Polymer Technology, 22(4), 297-305. External link

Reignier, J., & Favis, B. D. (2003). On the presence of a critical shell volume fraction leading to pseudo-pure droplet behavior in composite droplet polymer blends. Polymer, 44(18), 5061-5066. External link

Reignier, J., & Favis, B. D. (2001, May). Composite drop viscosity ratio effect on the morphology of hdpe/ps/pmma ternary blends [Paper]. Antec 2001, Dallas, Texas. External link

Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. D. (2001, May). Melt drawing of ldpe/thermoplastic starch blends [Paper]. Antec 2001, Dallas, Texas. External link

Rodriguez-Gonzalez, F., & Favis, B. D. (2001, January). Study of the rheological and thermal properties of thermoplastic starch [Paper]. PPS-17, Montréal, Québec. Unavailable

Reignier, J., & Favis, B. D. (2000). Control of the subinclusion microstructure in HDPE/PS/PMMA ternary blends. Macromolecules, 33(19), 6998-7008. External link

Reignier, J., & Favis, B. D. (2000, January). Controlling complex morphologies in immiscible polymer blends [Paper]. PPS-16, Shanghai, China. Unavailable

Reignier, J., & Favis, B. D. (1999, January). Control of the su-inclusion microstructure in HDPE/PS/PMMA ternary blends [Paper]. Polyblends 99, Industrial materials institute, Boucherville, Québec. Unavailable

Reignier, J., & Favis, B. D. (1999, May). Sub-inclusion morphologies in hdpe/ps/pmma ternary blend [Paper]. Antec '99. Volume II, New York. External link

S

Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645. External link

Sangroniz, L., Gancheva, T., Favis, B. D., Muller, A. J., & Santamaria, A. (2021). Rheology of complex biobased quaternary blends: Poly(lactic acid) poly(ethylene oxide) /poly(ether-b-amide)/poly(amide 11). Journal of Rheology, 65(3), 437-451. External link

Sarazin, P., Li, G., Orts, W. J., & Favis, B. D. (2008). Binary and Ternary Blends of Polylactide, Polycaprolactone and Thermoplastic Starch. Polymer, 49(2), 599-609. External link

Salehi, P., Sarazin, P., & Favis, B. D. (2008). Porous Devices Derived From Co-Continuous Polymer Blends as a Route for Controlled Drug Release. Biomacromolecules, 9(4), 1131-1138. External link

Salehi, P., Sarazin, P., & Favis, B. D. (2007). Model porous polymer blends as a route for controlled release. PMSE Preprints, 97, 165-166. Unavailable

Sarazin, P., & Favis, B. D. (2007). Stability of the Co-Continuous Morphology During Melt Mixing for Poly(Epsilon-Caprolactone)/Polystyrene Blends. Journal of polymer science. Part B, Polymer physics, 45(7), 864-872. External link

Sarazin, P., Virgilio, N., & Favis, B. D. (2006). Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks. Journal of Applied Polymer Science, 100(2), 1039-1047. External link

Sarazin, P., Huneault, M. A., Orts, W., & Favis, B. D. (2005, May). Blends of polylactide with thermoplastic starch [Paper]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. External link

Sarazin, P., & Favis, B. D. (2005). Influence of Temperature-Induced Coalescence Effects on Co-Continuous Morphology in Poly(Epsilon-Caprolactone)/Polystyrene Blends. Polymer, 46(16), 5966-5978. External link

Sarazin, P., Roy, X., & Favis, B. D. (2004). Controlled Preparation and Properties of Porous Poly(L-Lactide) Obtained From a Co-Continuous Blend of Two Biodegradable Polymers. Biomaterials, 25(28), 5965-5978. External link

Sarazin, P., Virgilio, N., & Favis, B. D. (2003, September). Morphology control in co-continuous poly(L-lactide)/polystyrene blends : a route towards highly structured and interconnected porosity in poly(L-lactide) materials [Paper]. PPS 2003 Europe-Africa Meeting of the Polymer Processing Society, Athens, Greece. Unavailable

Sarazin, P., & Favis, B. D. (2003). Morphology Control in Co-Continuous Poly(L-Lactide)/Polystyrene Blends: a Route Towards Highly Structured and Interconnected Porosity in Poly(L-Lactide) Materials. Biomacromolecules, 4(6), 1669-1679. External link

Sararin, P., & Favis, B. D. (2001, May). Interfacial tension, phase inversion and co-continuity in poly(l-lactide) polystyrene blends [Paper]. Antec 2001, Dallas, Texas. External link

St-Pierre, N., Favis, B. D., Ramsay, B. A., Ramsay, J. A., & Verhoogt, H. (1997). Processing and characterization of thermoplastic starch/polyethylene blends. Polymer, 38(3), 647-655. External link

St-Pierre, N., Favis, B. D., Ramsay, B. A., Ramsay, J. A., & Verghoogt, H. (1996, January). Thermoplastic starch/polyethylene blends [Paper]. 12th annual meeting of the polymer processing society, Sorrento, Italy. Unavailable

St-Pierre, N., Favis, B. D., Ramsay, B. A., Ramsay, J. A., & Verhoogt, H. (1995, October). Thermoplastic starch/polyethylene blends [Paper]. 1995 SPE Regional Technical Conference on Polymer Alloys and Blends/Polyblends'95, Boucherville, Can. Unavailable

T

Taguet, A., Bureau, M. N., Huneault, M. A., & Favis, B. D. (2014). Toughening mechanisms in interfacially modified HDPE/thermoplastic starch blends. Carbohydrate Polymers, 114, 222-229. External link

Taghizadeh, A., & Favis, B. D. (2013). Carbon nanotubes in blends of polycaprolactone/thermoplastic starch. Carbohydrate Polymers, 98(1), 189-98. External link

Taghizadeh, A., & Favis, B. D. (2013). Effect of high molecular weight plasticizers on the gelatinization of starch under static and shear conditions. Carbohydrate Polymers, 92(2), 1799-1808. External link

Taghizadeh, A., Sarazin, P., & Favis, B. D. (2013). High molecular weight plasticizers in thermoplastic starch/polyethylene blends. Journal of Materials Science, 48(4), 1799-1811. External link

Taghizadeh, A., & Favis, B. D. (2012, April). Carbon nanotubes in blends of thermoplastic starch/polycaprolactone [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. External link

Taghizadeh, A., & Favis, B. D. (2012, April). Effect of the molecular structure of plasticizer on the morphology of polymer blends with thermoplastic starch [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. External link

Taghizadeh, A., & Favis, B. D. (2010, May). Effect of heat and shear on the gelatinization of thermoplastic starch with various plasticizers [Paper]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA. External link

Taguet, A., Huneault, M. A., & Favis, B. D. (2009). Interface/morphology relationships in polymer blends with thermoplastic starch. Polymer, 50(24), 5733-5743. External link

Tsou, A. H., Favis, B. D., Hara, Y., Bhadane, P. A., & Kirino, Y. (2009). Reactive compatibilization in brominated poly(isobutylene-co-p- methylstyrene) and polyamide blends. Macromolecular Chemistry and Physics, 210(5), 340-348. External link

Tsou, A. H., Favis, B. D., Hara, Y., Bhadane, P. A., & Kirino, Y. (2007, October). Reactive compatibilization in polyamide and bimsm blends [Paper]. 172nd ACS Rubber Division Meeting - Fall 2007, Cleveland, Ohio, USA. Unavailable

Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2005). Mechanical Properties and Morphology of Ternary Pp/Epdm/Pe Blends. Canadian Journal of Chemical Engineering, 83(2), 300-309. External link

Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2004). Composite droplets with core/shell morphologies prepared from HDPE/PS/PMMA ternary blends by twin-screw extrusion. Polymer Engineering and Science, 44(4), 749-759. External link

Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. Subinclusion morphologies in HDPE/PS/PMMA ternary blends prepared by twin screw extrusion [Paper]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. External link

Tremblay, A., Tremblay, S., Favis, B. D., Selmani, A., & L'Espérance, G. (1995). Locating the modifier in a polymer blend by electron energy-loss spectroscopy. Macromolecules, 28(13), 4771-4773. External link

Tremblay, A., Tremblay, S., Favis, B. D., Selmani, A., & L'Espérance, G. (1995, May). Spectroscopic analyses of compatibilized polymer blends [Paper]. 53rd Annual Technical Conference, Boston, MA, USA. Unavailable

V

Virgilio, N., & Favis, B. D. (2011). Self-assembly of Janus composite droplets at the interface in quaternary immiscible polymer blends. Macromolecules, 44(15), 5850-5856. External link

Virgilio, N., Sarazin, P., & Favis, B. D. (2011). Ultraporous poly(l-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface. Polymer, 52(7), 1483-1489. External link

Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2010). Modified interfacial tensions measured in situ in ternary polymer blends demonstrating partial wetting. Polymer, 51(6), 1472-1484. External link

Virgilio, N., Sarazin, P., & Favis, B. D. (2010, December). Novel microstructures induced by partial wetting in ternary and quaternary immiscible polymer blends [Abstract]. 6th CREPEC Annual Colloquium, Montréal, Québec. Unavailable

Virgilio, N., Sarazin, P., & Favis, B. D. (2010, October). Novel microstructures induced by partial wetting in ternary and quaternary immiscible polymer blends [Abstract]. 60th Canadian Chemical Engineering Conference (CSCHE 2010), Saskatoon, Saskatchewan. Unavailable

Virgilio, N., Sarazin, P., & Favis, B. D. (2010). Towards ultraporous poly(L-lactide) scaffolds from quaternary immiscible polymer blends. Biomaterials, 31(22), 5719-5728. External link

Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2009). In situ measure of interfacial tensions in ternary and quaternary immiscible polymer blends demonstrating partial wetting. Macromolecules, 42(19), 7518-7529. External link

Virgilio, N., Marc-Aurele, C., & Favis, B. D. (2009). Novel self-assembling close-packed droplet array at the interface in ternary polymer blends. Macromolecules, 42(9), 3405-3416. External link

Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2008, June). The Neumann triangle method to measure interfacial tensions in immiscible polymer blends using focused ion beam and atomic force microscopy [Paper]. 24th Annual meeting of Polymer Processing Society, Salerno, Italy. Unavailable

Virgilio, N., Marc-Aurele, C., & Favis, B. D. (2007, May). Novel self-assembling morphologies in multicomponent polymer blends [Paper]. ANTEC 2007, Cincinnati, OH, United States. External link

Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2007, August). Novel self-assembling pearl necklace microstructure induced by partial wetting in ternary polymer blends [Abstract]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA. Unavailable

Virgilio, N., Pépin, M. F., Desjardins, P., L'Espérance, G., & Favis, B. D. (2005, August). High contrast imaging of interphases in ternary polymer blends using focused ion beam preparation and atomic force microscopy [Paper]. PPS 2005 America's Regional Meeting of the Polymer Processing Society, Québec, QC, Canada.. Unavailable

Virgilio, N., Favis, B. D., Pepin, M. F., Desjardins, P., & L'Espérance, G. (2005). High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy. Macromolecules, 38(6), 2368-2375. External link

Verhoogt, H., Ramsay, B. A., Favis, B. D., & Ramsay, J. A. (1996). The influence of thermal history on the properties of poly(3-hydroxyburate-co-12%-3-hydroxyvalerate). Journal of Applied Polymer Science, 61(1), 87-96. External link

Verhoogt, H., St-Pierre, N., Truchon, F. S., Ramsay, B. A., Favis, B. D., & Ramsay, J. A. (1994, August). Blends containing poly(hydroxybutyrate-co-12%-hydroxyvalerate) and thermoplastic starch [Paper]. 4th International symposium on bacterial polyhydroxyalkanoates, Montréal, Québec. Published in Canadian Journal of Microbiology, 41(SUP1). External link

Verhoogt, H., Truchon, F. S., Favis, B. D., St-Pierre, N., & Ramsay, B. A. (1995, May). Morphology and mechanical properties of blends containing thermoplastic starch and P(HB-co-12%-HV) [Paper]. 53rd Annual Technical Conference, Boston, MA, USA. Unavailable

Verhoogt, H., Ramsay, B. A., & Favis, B. D. (1994). Polymer blends containing poly(3-hydroxyalkanoate)s. Polymer, 35(24), 5155-5169. External link

W

Wang, J., Reyna-Valencia, A., & Favis, B. D. (2021). Surface Migration of Conductive PEBA in Ternary Polymer Blend Films with Different Wetting Morphologies. Macromolecules, 54(2), 5607-5617. External link

Wang, J., Tsou, A. H., & Favis, B. D. (2018). Effects of Polyethylene Molecular Weight Distribution on Phase Morphology Development in Poly(p-phenylene ether) and Polyethylene Blends. Macromolecules, 51(22), 9165-9176. External link

Wang, J., Tsou, A. H., Passino, H. L., & Favis, B. D. (2018). PPE-g-HDPE in high-performance Poly(p-Phenylene Ether)/Polyethylene Blends: Synthesis and compatibilization effects. Polymer, 138, 92-102. External link

Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Continuity, morphology and surface resistivity in binary blends of poly(ether-block-amide) with polyethylene and polystyrene. European Polymer Journal, 91, 197-211. External link

Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Controlling the continuity and surface migration of conductive poly(ether-block-amide) in melt processed cast-film blends. Polymer, 136, 224-234. External link

Wang, J., Reyna-Valencia, A., & Favis, B. D. (2016). Assembling Conductive PEBA Copolymer at the Continuous Interface in Ternary Polymer Systems: Morphology and Resistivity. Macromolecules, 49(14), 5115-5125. External link

Wang, J., Reyna-Valencia, A., Chaigneau, R., & Favis, B. D. (2016). Controlling the Hierarchical Structuring of Conductive PEBA in Ternary and Quaternary Blends. Industrial & Engineering Chemistry Research, 55(50), 12848-12859. External link

Wang, J., Lessard, B. H., Maric, M., & Favis, B. D. (2014). Hierarchically porous polymeric materials from ternary polymer blends. Polymer (United Kingdom), 55(16), 3461-3467. External link

Weidong, W., Liang, H., Favis, B. D., & Schreiber, H. P. (2001). Surface modification strategies for multicomponent polymer systems. III : Effect of diblock copolymer-modified rutile on the morphology and mechanical properties of LLDPE/PVC blends. Journal of Applied Polymer Science, 81(8), 1891-1901. External link

X

Xiang, Z., Sarazin, P., & Favis, B. D. (2009). Controlling burst and final drug release times from porous polylactide devices derived from co-continuous polymer blends. Biomacromolecules, 10(8), 2053-2066. External link

Y

Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B. D., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173. Available

Yuan, Z., & Favis, B. D. (2006). Influence of the efficacy of interfacial modification on the coarsening of cocontinuous PS/HDPE blends during quiescent annealing. Journal of polymer science. Part B, Polymer physics, 44(4), 711-721. External link

Yuan, Z. H., & Favis, B. D. (2005). Coarsening of Immiscible Co-Continuous Blends During Quiescent Annealing. AICHE Journal, 51(1), 271-280. External link

Yuan, Z., & Favis, B. D. (2004). Macroporous polylactide of controlled pore size derived from the annealing of co-continuous polystyrene/polylactide blends. Biomaterials, 25(11), 2161-2170. External link

Yuan, Z., & Favis, B. D. (2002, May). Annealing of a co-continuous polystyrene/polylactide blend and its influence on the morphology [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link

Z

Zolali, A. M., & Favis, B. D. (2018). Toughening of cocontinuous polylactide/polyethylene blends via an interfacially percolated intermediate phase. Macromolecules, 51(10), 3572-3581. External link

Zolali, A. M., & Favis, B. D. (2017). Compatibilization and toughening of co-continuous ternary blends via partially wet droplets at the interface. Polymer, 114, 277-288. External link

Zolali, A. M., & Favis, B. D. (2017). Partial to complete wetting transitions in immiscible ternary blends with PLA: the influence of interfacial confinement. Soft Matter, 13(15), 2844-2856. External link

Zolali, A. M., Heshmati, V., & Favis, B. D. (2017). Ultratough co-continuous PLA/PA11 by interfacially percolated poly(ether-b-amide). Macromolecules, 50(1), 264-274. External link

Zolali, A. M., & Favis, B. D. (2016). Partial and complete wetting in ultra-low interfacial tension multiphase blends with polylactide. Journal of Physical Chemistry B, 120(49), 12708-12719. External link

Zolali, A. M., & Favis, B. D. (2014, April). Morphology and physical properties of biodegradable multicomponent blends with polylactic acid [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. External link

Zhang, J., Ravati, S., Virgilio, N., & Favis, B. D. (2007). Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends. Macromolecules, 40(25), 8817-8820. External link

List generated on: Wed Feb 12 05:47:34 2025 EST