 | Monter d'un niveau |
Arroyo, O. H., Huneault, M. A., Favis, B., & Bureau, M. (2010). Processing and properties of PLA/Thermoplastic starch/Montmorillonite nanocomposites. Polymer Composites, 31(1), 114-127. Lien externe
Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M. D., & Favis, B. (2014). Enhancement in interfacial reactive compatibilization by chain mobility. Polymer (United Kingdom), 55(16), 3905-3914. Lien externe
Bhadane, P. A., Cheng, J., Ellul, M. D., & Favis, B. (2012). Decoupling of reactions in reactive polymer blending for nanoscale morphology control. Journal of Polymer Science, Part B: Polymer Physics, 50(23), 1619-1629. Lien externe
Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M., & Favis, B. (2011). Morphology and continuity development in highly reactive nanoscale polymer blends. Polymer, 52(22), 5107-5117. Lien externe
Bhadane, P. A., Tsou, A. H., Cheng, J., & Favis, B. (2008). Morphology Development and Interfacial Erosion in Reactive Polymer Blending. Macromolecules, 41(20), 7549-7559. Lien externe
Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. (2006). Continuity Development in Polymer Blends of Very Low Interfacial Tension. Polymer, 47(8), 2760-2771. Lien externe
Bhadane, P. A., Virgilio, N., Favis, B., Champagne, M. F., Huneault, M. A., & Tofan, F. (2006). Effect of Dynamic Vulcanization on Co-Continuous Morphology. AICHE Journal, 52(10), 3411-3420. Lien externe
Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. (2006). Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension. Journal of polymer science. Part B, Polymer physics, 44(14), 1919-1929. Lien externe
Bhadane, P., Favis, B., Huneault, M. A., Champagne, M., & Tofan, F. (mai 2005). Erosion and continuity development in high viscosity ratio epdm/pp blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Bhadane, P. A., Favis, B., Champagne, M. F., Huneault, M. A., & Tofan, F. Effect of viscosity ratio on co-continuity for ethylene-propylene-diene terpolymer/polypropylene blends [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Bourry, D., & Favis, B. (1998). Cocontinuity and Phase Inversion in HDPE/PS Blends: Influence of Interfacial Modification and Elasticity. Journal of polymer science. Part B, Polymer physics, 36(11), 1889-1899. Lien externe
Bourry, D., & Favis, B. (1998). Morphology Development in a Polyethylene/Polystyrene Binary Blend During Twin-Screw Extrusion. Polymer, 39(10), 1851-1856. Lien externe
Bourry, D., & Favis, B. (janvier 1996). Development of the morphology of an immiscible binary blend during twin-srew extrusion [Communication écrite]. 12th annual meeting of the polymer processing society, Sorrento, Italy. Non disponible
Bourry, D., & Favis, B. (mai 1995). Co-continuity and phase inversion in HDPE/PS blends: the role of interfacial modification [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Bélanger, C., Cielo, P., Favis, B., Patterson, W. I., & Utracki, L. A. (1994). Polarized light scattering approach for simulated polymer blend morphology characterization. Polymer Engineering and Science, 34, 1589-1589. Lien externe
Comtois, E., Dubois, C., & Favis, B. (2022). Linear burning rate of double base propellant containing Azidodeoxycellulose. Journal of Energetic Materials, 40(2), 136-152. Lien externe
Comtois, E., Favis, B., & Dubois, C. (2021). Linear Burning Rate and Erosivity Properties of Nitrocellulose Propellant Formulations Plasticized by Glycidyl Azide Polymer and Nitroglycerine. Propellants, Explosives, Pyrotechnics, 46(3), 494-504. Lien externe
Comtois, E., Favis, B., & Dubois, C. (2020). Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine. Polymer Engineering and Science, 60(9), 13 pages. Lien externe
Cao, V., Margni, M., Favis, B., & Deschênes, L. (2017). Choice of land reference situation in life cycle impact assessment. International Journal of Life Cycle Assessment, 22(8), 1220-1231. Lien externe
Cao, V., Margni, M., Favis, B., & Deschênes, L. (2015). Aggregated indicator to assess land use impacts in life cycle assessment (LCA) based on the economic value of ecosystem services. Journal of Cleaner Production, 94, 56-66. Lien externe
Cercle, C., Sarazin, P., & Favis, B. (2013). High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. Carbohydrate Polymers, 92(1), 138-148. Lien externe
Cao, V., Margni, M., Favis, B., & Deschênes, L. (mai 2012). Development of an integrated indicator for land use based on ecosystem services [Résumé]. 6th SETAC World Congress/SETAC Europe 22nd Annual Meeting, Berlin, Germany. Lien externe
Cercle, C., & Favis, B. (2012). Generalizing interfacial modification in polymer blends. Polymer (United Kingdom), 53(20), 4338-4343. Lien externe
Chapleau, N., Favis, B., & Carreau, P. (2000). Measuring the Interfacial Tension of Polyamide/Polyethylene and Polycarbonate/Polypropylene Blends: Effect of Temperature. Polymer, 41(17), 6695-6698. Lien externe
Chapleau, N., Favis, B., & Carreau, P. (1998). Measuring the Interfacial Tension of Polymers in the Presence of an Interfacial Modifier: Migrating the Modifier to the Interface. Journal of polymer science. Part B, Polymer physics, 36(11), 1947-1958. Lien externe
Cigana, P., & Favis, B. (1998). Relative Efficacy of Diblock and Triblock Copolymers for a Polystyrene/Ethylene-Propylene Rubber Interface. Polymer, 39(15), 3373-3378. Lien externe
Cigana, P., Benoit, V., Tremblay, A., & Favis, B. (avril 1997). Detection of block copolymer micelles in compatibilized polymer blends: An indirect method [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Lien externe
Chapleau, N., Favis, B., & Carreau, P. (avril 1997). Morphology of polyamide/polyethylene blends under extensional flow: Effect of compatibilization [Communication écrite]. 55th Annual Technical Conference (ANTEC 1997), Toronto, Can. Lien externe
Cigana, P., Favis, B., Albert, C., & Vu-Khanh, T. (1997). Morphology-interface-property relationships in polystyrene/ethylene-propylene rubber blends. 1. Influence of triblock copolymer interfacial modifiers. Macromolecules, 30(14), 4163-4169. Lien externe
Cigana, P., Favis, B., & Jerome, R. (1996). Diblock copolymers as emulsifying agents in polymer blends: influence of molecular weight, architecture, and chemical composition. Journal of polymer science. Part B, Polymer physics, 34(9), 1691-1700. Lien externe
Cigana, P., Favis, B., & Jerome, R. (1995). Effect of molecular weight and architecture of the compatibilizing agent on the emulsification of polystyrene/ethylene-propylene rubber blends. Polymeric Materials Science and Engineering, 73, 16-17. Non disponible
Chapleau, N., Favis, B., & Carreau, P. (1995). Evaluation of the interfacial tension using the breaking thread method: Effect of temperature and of interfacial modifier. Polymeric Materials Science and Engineering, 73, 18-19. Non disponible
Chapleau, N., Favis, B., & Carreau, P. (1995). Evaluation of the interfacial-tension using the breaking thread method - effect of temperature and ot interfacial modifier. Abstracts of Papers of the American Chemical Society, 210, 10-10. Non disponible
El Ouassini, A., Saucier, A., Marcotte, D., & Favis, B. (2008). A Patchwork Approach to Stochastic Simulation: a Route Towards the Analysis of Morphology in Multiphase Systems. Chaos, Solitons & Fractals, 36(2), 418-436. Lien externe
Everaert, V., Groeninckx, G., Pionteck, J., Favis, B., Aerts, L., Moldenaers, P., & Mewis, J. (2000). Miscible PS/PPE Compounds: an Alternative for Blend Phase Morphology Studies? Influence of the PPE Content on the Surface Tension of PS/PPE and on the Interfacial Tension in PP/(PS/PPE) and Pom/(PS/PPE) Blends. Polymer, 41(3), 1011-1025. Lien externe
Fenni, S. E., Wang, J., Haddaoui, N., Favis, B., Muller, A. J., & Cavallo, D. (2020). Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(epsilon-caprolactone) ternary blends with partial wetting morphology. Polymer Crystallization, 3(6), e10145 (13 pages). Lien externe
Fenni, S. E., Wang, J., Haddaoui, N., Favis, B., Muller, A. J., & Cavallo, D. (2020). Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(epsilon-caprolactone). Macromolecules, 53(5), 1726-1735. Lien externe
Fenni, S. E., Wang, J., Haddaoui, N., Favis, B., Muller, A. J., & Cavallo, D. (2019). Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends. Thermochimica Acta, 677, 117-130. Lien externe
Favis, B., & Le Corroller, P. (2017). Polymeric material and process for recycling plastic blends. (Brevet no US9670344). Lien externe
Favis, B., Sarazin, P., Li, J., & Yuan, Z. (2011). Microporous articles comprising biodegradable medical polymers, method of preparation thereof and method of use thereof. (Brevet no US8007823). Lien externe
Favis, B., Sarazin, P., & Roy, X. (2007). Porous nanosheath networks, method of making and uses thereof. (Demande de brevet no WO2007053955). Lien externe
Favis, B., Yuan, Z., & Riscanu, D. (2006). Thermoplastic starch and synthetic polymer blends and method of making. (Demande de brevet no WO2006116861). Lien externe
Favis, B., Rodriguez, F., & Ramsay, B. A. (2005). Method of making polymer compositions containing thermoplastic starch. (Brevet no US6844380). Lien externe
Favis, B., Rodriguez, F., & Ramsay, B. A. (2003). Polymer compositions containing thermoplastic starch. (Brevet no US6605657). Lien externe
Favis, B., Cigana, P., Matos, M., & Tremblay, A. (1997). Factors influencing the efficacy of an interfacial modifier for the interface in an immiscible polymer blend. Canadian Journal of Chemical Engineering, 75(2), 273-281. Lien externe
Fellahi, S., Favis, B., & Fisa, B. (1996). Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends. Polymer, 37(13), 2615-2626. Lien externe
Fellahi, S., Favis, B., & Fisa, B. (1995). Tensile dilatometry of injection-moulded HDPE/PA6 blends. Journal of Materials Science, 30(21), 5522-5530. Lien externe
Fellahi, S., Fisa, B., & Favis, B. (1995). Weldline strength in injection molded HDPE/PA6 blends: influence of interfacial modification. Journal of Applied Polymer Science, 57(11), 1319-1332. Lien externe
Fellahi, S., Meddad, A., Fisa, B., & Favis, B. (1995). Weldlines in injection-molded parts: a review. Advances in Polymer Technology, 14(3), 169-195. Lien externe
Favis, B., Matos, M., Tremblay, A., & Lepers, J.-C. (janvier 1994). Interface/morphology relationships in polymer blends [Communication écrite]. Polymer processing society, European regional meeting, Strasbourg, France. Non disponible
Favis, B. (1994). Phase size/interface relationships in polymer blends: The emulsification curve. Polymer, 35(7), 1552-1555. Lien externe
Fellahi, S., Favis, B., & Fisa, B. (mai 1994). Tensile dilatometry of injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Fellahi, S., Fisa, B., & Favis, B. (mai 1994). Weldline strength evaluation in injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Gancheva, T., Li, Y., Pilon, D., Gauthier, M., Akbarzadeh, A., & Favis, B. (2022). Post-extrusion process for the robust preparation of highly uniform multiphase polymeric 3D printing filaments. Polymer Engineering and Science, 62(1), 66-74. Lien externe
Gazil, O., Gancheva, T., Bilodeau-Calame, M., Favis, B., & Virgilio, N. (2020). Controlling the distribution of nanoparticles in hydrogels via interfacial synthesis. Nanoscale Advances, 2(11), 5263-5270. Lien externe
Ghavidel Mehr, N., Hoemann, C. D., & Favis, B. (2015). Chitosan surface modification of fully interconnected 3D porous poly(-caprolactone) by the LbL approach. Polymer (United Kingdom), 64, 112-121. Lien externe
Ghavidel Mehr, N., Li, X., Ariganello, M. B., Hoemann, C. D., & Favis, B. (2014). Poly(-caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior. Journal of Materials Science: Materials in Medicine, 25(9), 2083-2093. Lien externe
Gang, L., Sarazin, P., Zhenhua, Y., & Favis, B. (mai 2005). Morphology and rheology of polycaprolactone/thermoplastic starch blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Gonzalez-Nunez, R., Padilla, H., De Kee, D., & Favis, B. (2001). Barrier Properties of Polyamide-6/High Density Polyethylene Blends. Polymer Bulletin, 46(4), 323-330. Lien externe
Gonzalez-Nunez, R., Arellano, M., Moscoso, F. J., Gonzalez-Romero, V. M., & Favis, B. (2001). Determination of a Limiting Dispersed Phase Concentration for Coalescence in Pa6/Hdpe Blends Under Extensional Flow. Polymer, 42(12), 5485-5489. Lien externe
Gonzalez-Nunez, R., Moscoso, F. J., Gonzalez-Romero, V. M., & Favis, B. (mai 2000). Determination of a limit in particle concentration for coalescence in pa6/hdpe blends under extensional flow [Communication écrite]. Antec 2000, Orlando, FL. Lien externe
Gonzalez, F. J. R., Ramsay, B. A., & Favis, B. Low density polyethylene/thermoplastic starch blends: effect of glycerol content and LDPE concentration on morphology and tensile properties in the dual phase continuity region [Communication écrite]. ANTEC : Annual Technical Conference. Society of Plastics Engineers. Lien externe
Gaona-Torres, J., Gonzalez-Nunez, R., & Favis, B. (avril 1997). Influence of melt-drawn ratio and composition on drop coalescence in nylon 6/hdpe blends [Communication écrite]. Antec 97. Volume II, Toronto. Lien externe
Gonzalez-Nunez, R., Chan Man Fong, C. F., Favis, B., & De Kee, D. (1996). Deformation of drops in extensional viscoelastic flow. Journal of Applied Polymer Science, 62(10), 1627-1634. Lien externe
Gonzalez-Nunez, R., De Kee, D., & Favis, B. (1996). The influence of coalescence on the morphology of the minor phase in melt-drawn polyamide-6/HDPE blends. Polymer, 37(21), 4689-4693. Lien externe
Gonzalez-Nunez, R., DeKee, D., & Favis, B. (mai 1995). Experimental study of deformation and coalescence effects of the minor phase in immiscible polymer blends [Communication écrite]. Antec '95. Vol.II, Boston, Ma. Non disponible
Hoemann, C. D., Gonzalez, J. R., Guzman-Morales, J., Chen, G., Jalali Dil, E., & Favis, B. (2022). Chitosan coatings with distinct innate immune bioactivities differentially stimulate angiogenesis, osteogenesis and chondrogenesis in poly-caprolactone scaffolds with controlled interconnecting pore size. Bioactive Materials, 10, 430-442. Lien externe
Huang, Y., Gancheva, T., Favis, B., Abidli, A., Wang, J., & Park, C. B. (2021). Hydrophobic Porous Polypropylene with Hierarchical Structures for Ultrafast and Highly Selective Oil/Water Separation. ACS Applied Materials & Interfaces, 13(14), 16859-16868. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. (2018). Cellulose nanocrystal in poly(lactic acid)/polyamide11 blends: Preparation, morphology and co-continuity. European Polymer Journal, 98(Supplement), 11-20. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. (2018). Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends. Journal of Polymer Science, Part B: Polymer Physics, 56(7), 576-587. Lien externe
Heshmati, V., & Favis, B. (2017). High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility. Polymer, 123, 184-193. Lien externe
Heshmati, V., Zolali, A. M., & Favis, B. (2017). Morphology development in poly (lactic acid)/polyamide11 biobased blends: chain mobility and interfacial interactions. Polymer, 120, 197-208. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. (avril 2014). Poly (lactic acid)/polyamidel 1/cellulose multiphase systems [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Jalali Dil, E., Arjmand, M., Otero Navas, I., Sundararaj, U., & Favis, B. (2020). Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity. Macromolecules, 52(22), 10267-10277. Lien externe
Jegat, C., Virgilio, N., & Favis, B. (2017). Self-assembly of oil microdroplets at the interface in co-continuous polymer blends. European Polymer Journal, 93, 259-271. Lien externe
Jalali Dil, E., Arjmand, M., Li, Y., Sundararaj, U., & Favis, B. (2016). Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends. European Polymer Journal, 85, 187-197. Lien externe
Jalali Dil, E., Virgilio, N., & Favis, B. (2016). The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on the morphology, rheology and mechanical properties. European Polymer Journal, 85, 635-646. Lien externe
Jegat, C., Virgilio, N., & Favis, B. (novembre 2015). Design d'une interface hydrophile/hydrophobe dans un matériau polymère à réservoirs lipidiques [Présentation]. Dans 44e Colloque national du Groupe français d'études et d'applications des polymères, Belvaux, Luxembourg. Non disponible
Jalali Dil, E., & Favis, B. (2015). Localization of micro and nano- silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system. Polymer, 77, 156-166. Lien externe
Jalali Dil, E., & Favis, B. (2015). Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 76, 295-306. Lien externe
Jalali Dil, E., Carreau, P., & Favis, B. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212. Lien externe
Jalali Dil, E., & Favis, B. (avril 2014). Effect of the localization of silica particles on the morphology of poly(lactic acid)/polyethylene blends [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Jalali Dil, E., Carreau, P., Ravati, S., & Favis, B. (avril 2012). Morphology of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and its composite with spherical silica particles [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Jalali Dil, E., & Favis, B. (avril 2012). Selective localization of spherical silica particles in heterophase poly(lactic acid)/ low density polyethylene blends [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012), Orlando, FL, United states. Lien externe
Jianming, L., Ma, P. L., & Favis, B. (2002). The role of the blend interface type on morphology in cocontinuous polymer blends. Macromolecules, 35(6), 2005-2016. Lien externe
Jack, K. S., Natansohn, A., Jiahu, W., Favis, B., & Cigana, P. (1998). Determination of domain sizes in compatibilized polystyrene(ps)-(ethylene-propylene rubber)(epr) blends by measurements of proton spin diffusion. Chemistry of Materials, 10(5), 1301-1308. Lien externe
Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. Lien externe
Liberelle, B., Jalali Dil, E., Sabri, F., Favis, B., De Crescenzo, G., & Virgilio, N. (2021). Immobilizing Enzyme Biocatalysts onto Porous Polymer Monoliths Prepared from Cocontinuous Polymer Blends. ACS Applied Polymer Materials, 3(12), 6359-6365. Lien externe
Li, X., Ghavidel Mehr, N., Guzman-Morales, J., Favis, B., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (2017). Cationic osteogenic peptide P15-CSP coatings promote 3-D osteogenesis in poly(epsilon-caprolactone) scaffolds of distinct pore size. Journal of Biomedical Materials Research Part A, 105(8), 2171-2181. Lien externe
Li, X., Mehr, N. G., Favis, B., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (août 2016). Fusion peptide P15-CSP coatings promote in vitro osteogenesis in 84 and 141 micron pores of 3-D poly(epsilon-caprolactone) scaffolds [Communication écrite]. 25th International Materials Research Congress (IMRC 2016), Cancún, Mexico. Non disponible
Le Corroller, P., & Favis, B. (2012). Droplet-in-droplet polymer blend microstructures: A potential route toward the recycling of co-mingled plastics. Macromolecular Chemistry and Physics, 213(19), 2062-2074. Lien externe
Li, G., Sarazin, P., Orts, W. J., Imam, S. H., & Favis, B. (2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology. Macromolecular Chemistry and Physics, 212(11), 1147-1154. Lien externe
Li, G., Sarazin, P., & Favis, B. (mai 2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Lien externe
Le Corroller, P., & Favis, B. (2011). Effect of viscosity in ternary polymer blends displaying partial wetting phenomena. Polymer, 52(17), 3827-3834. Lien externe
Li, G., & Favis, B. (mai 2010). Morphology development and interfacial interactions in polycaprolactone/ thermoplastic starch blends [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA. Lien externe
Li, G., & Favis, B. (2010). Morphology development and interfacial interactions in polycaprolactone/ thermoplastic-starch blends. Macromolecular Chemistry and Physics, 211(3), 321-333. Lien externe
Li, G., Sarazin, P., & Favis, B. (2008). The Relationship Between Starch Gelatinization and Morphology Control in Melt-Processed Polymer Blends With Thermoplastic Starch. Macromolecular Chemistry and Physics, 209(10), 991-1002. Lien externe
Li, J., & Favis, B. (2002). Strategies to measure and optimize the migration of the interfacial modifier to the interface in immiscible polymer blends. Polymer, 43(18), 4935-4945. Lien externe
Li, J., & Favis, B. (2001). Characterizing Co-Continuous High Density Polyethylene/Polystyrene Blends. Polymer, 42(11), 5047-5053. Lien externe
Li, J., Ma, P. L., & Favis, B. (janvier 2001). Role of the blend interface type on morphology in co-continous polymer blends [Communication écrite]. PPS-17, Montréal, Québec. Non disponible
Li, J., Ma, P., & Favis, B. Co-continuous homopolymer/copolymer blends [Communication écrite]. ANTEC : Annual Technical Conference. Society of Plastics Engineers. Lien externe
Lepers, J.-C., Favis, B., & Kent, S. L. (2000). Interface-property relationships in biaxially stretched PP-PET blends. Polymer, 41(5), 1937-1946. Lien externe
Liang, H., Xu, R., Favis, B., & Schreiber, H. P. (2000). Interfacial tension and acid-base approaches to polymer interactions. Journal of polymer science. Part B, Polymer physics, 38(16), 2096-2104. Lien externe
Li, J., & Favis, B. (mai 1999). Characterising co-continuous polyethylene/polystyrene blends [Communication écrite]. Antec '99. 57th Annual Technical Conference, New-York, NY. Lien externe
Liang, H., Favis, B., Yu, Y. S., & Eisenberg, A. (1999). Correlation Between the Interfacial Tension and Dispersed Phase Morphology in Interfacially Modified Blends of Lldpe and Pvc. Macromolecules, 32(5), 1637-1642. Lien externe
Lepers, J. C., Favis, B., & Lacroix, C. (1999). The influence of partial emulsification on coalescence suppression and interfacial tension reduction in PP/PET blends. Journal of polymer science. Part B, Polymer physics, 37(9), 939-951. Lien externe
Lacasse, C., & Favis, B. (1999). Interface/morphology/property relationships in polyamide-6/ABS blends. Advances in Polymer Technology, 18(3), 255-265. Lien externe
Lepers, J. C., & Favis, B. (1999). Interfacial Tension Reduction and Coalescence Suppression in Compatibilized Polymer Blends. AICHE Journal, 45(4), 887-895. Lien externe
Lepers, J.-C., Favis, B., & Kent, S. L. Study of the morphology and the tensile mechanical properties of biaxially oriented PET/PP blends [Communication écrite]. Imaging and Image Analysis Applications for Plastics. Lien externe
Liang, H., Xu, R. J., Favis, B., & Schreiber, H. P. (1999). Surface Modification Strategies for Multicomponent Polymer Systems - VI: Acid-Base Interactions as a Strategy for Interfacial Modification in Immiscible Polymer Blends. Polymer, 40(15), 4419-4423. Lien externe
Lacasse, C., & Favis, B. (octobre 1997). Effects of extruder type, compatibilizer level and composition on the morphology and impact strength of a polyamide-6/ABS blend [Communication écrite]. 1997 International Symposium on Polymer Blends, Alloys and Filled Systems, POLYBLENDS, Boucherville, Can. Non disponible
Legros, A., Carreau, P., Favis, B., & Michel, A. (1997). Morphology modification by interfacial chemical reaction in a polyester/ethylene vinyl acetate/polyethylene blend. Polymer, 38(20), 5085-5089. Lien externe
Lepers, J.-C., Favis, B., & Tabar, R. J. (1997). The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends. Journal of polymer science. Part B, Polymer physics, 35(14), 2271-2280. Lien externe
Lepers, J.-C., Favis, B., & Kent, S. L. (avril 1997). Study of the morphology and the tensile mechanical properties of biaxially oriented PET/PP blends [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Lien externe
Liang, H., Favis, B., Yu, Y., & Eisenberg, A. (avril 1997). Surface modification strategies for multi-component polymer systems, IV: Block copolymers as interfacial modifiers for blends of LLDPE and PVC [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Lien externe
Liang, H., & Favis, B. (1997). Surface modification strategies for multicomponent polymer systems. 2. Study of the interfacial tension and morphology of linear low-density polyethylene/poly(vinyl chloride) blends. Industrial & Engineering Chemistry Research, 36(4), 1211-1217. Lien externe
Lomellini, P., Matos, M., & Favis, B. (1996). Interfacial modification of polymer blends : the emulsification curve : 2. Predicting the critical concentration of interfacial modifier from geometrical considerations. Polymer, 37(25), 5689-5694. Lien externe
Lacroix, C., Bousmina, M., Carreau, P., Favis, B., & Michel, A. (1996). Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties. Polymer, 37(14), 2939-2947. Lien externe
Leclair, A., & Favis, B. (1996). Role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties. Polymer, 37(21), 4723-4728. Lien externe
Lepers, J.-C., & Favis, B. (mai 1995). Morphology/interface relationships in polyester/polyolefin blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Legros, A., Carreau, P., Favis, B., & Michel, A. (1994). Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties. Polymer, 35(4), 758-764. Lien externe
Mehr, N. G., Li, X., Chen, G., Favis, B., & Hoemann, C. D. (2015). Pore size and LbL chitosan coating influence mesenchymal stem cell in vitro fibrosis and biomineralization in 3D porous poly(epsilon-caprolactone) scaffolds. Journal of Biomedical Materials Research - Part A, 103(7), 2449-2459. Lien externe
Mihai, M., Huneault, M. A., & Favis, B. (2010). Rheology and extrusion foaming of chain-branched poly(lactic acid). Polymer Engineering and Science, 50(3), 629-642. Lien externe
Mihai, M., Huneault, M. A., & Favis, B. (juin 2009). Crystallinity development in cellular poly (lactic acid) in the presence of supercritical carbon dioxide [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Lien externe
Mihai, M., Huneault, M. A., & Favis, B. (2009). Crystallinity development in cellular poly(lactic acid) in the presence of supercritical carbon dioxide. Journal of Applied Polymer Science, 113(5), 2920-2932. Lien externe
Mihai, M., Huneault, M. A., Favis, B., & Li, H. B. (2007). Extrusion Foaming of Semi-Crystalline Pla and Pla/Thermoplastic Starch Blends. Macromolecular Bioscience, 7(7), 907-920. Lien externe
Mihai, M., Huneault, M. A., & Favis, B. (2007). Foaming of Polystyrene/Thermoplastic Starch Blends. Journal of Cellular Plastics, 43(3), 215-236. Lien externe
Mihai, M. H., Huneault, M. A., & Favis, B. (mai 2005). Foams extruded from polystyrene / thermoplastic starch blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Marin, N., & Favis, B. (2002). Co-Continuous Morphology Development in Partially Miscible Pmma/Pc Blends. Polymer, 43(17), 4723-4731. Lien externe
Ma, P. L., Favis, B., Champagne, M. F., Huneault, M. A., & Tofan, F. (2002). Effect of dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends. Polymer Engineering and Science, 42(10), 1976-1989. Lien externe
Marin, N., & Favis, B. (janvier 2001). Co-continuous morphology development in partially miscible binary polymer blends [Communication écrite]. PPS-17, Montréal, Québec. Non disponible
Ma, P. L., Favis, B., Champagne, M. F., Huneault, M. A., & Tofan, F. Effect of compatibilization and dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Martin, P., Carreau, P., Favis, B., & Djerome, R. (2000). Investigating the morphology/rheology inter-relationships in immiscible polymer blends. Journal of Rheology, 44(3), 568-583. Lien externe
Mekhilef, N., Carreau, P., Favis, B., Martin, P., & Ouhlal, A. (2000). Viscoelastic Properties and Interfacial Tension of Polystyrene- Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 38(10), 1359-1368. Lien externe
Mamat, A., Vukhanh, T., Cigana, P., & Favis, B. (1997). Impact fracture behavior of nylon-6/abs blends. Journal of polymer science. Part B, Polymer physics, 35(16), 2583-2592. Lien externe
Mekhilef, N., Favis, B., & Carreau, P. (1997). Morphological stability, interfacial tension, and dual-phase continuity in polystyrene-polyethylene blends. Journal of polymer science. Part B, Polymer physics, 35(2), 293-308. Lien externe
Matos, M. E., Rosales, C., Mueller, A. J., & Favis, B. (avril 1997). Polystyrene/polypropylene blends: morphology/interphase relationship, rheological and calorimetric behaviour [Communication écrite]. Antec 97. Volume II, Toronto. Lien externe
Mekhilef, N., Carreau, P., & Favis, B. (janvier 1996). Viscoelastic properties of polystyrene-polyethylene blends: interfacial tension measurements using the breaking thread method and predictions with an emulsion model [Communication écrite]. 12th Annual Meeting of the Polymer Processing Society, Sorrento, Italy. Non disponible
Matos, M., Favis, B., & Lomellini, P. (1995). Interfacial modification of polymer blends--the emulsification curve. I. Influence of molecular weight and chemical composition of the interfacial modifier. Polymer, 36(20), 3899-3907. Lien externe
Mekhilef, N., Favis, B., & Carreau, P. (mai 1995). Morphological stability of polystyrene polyethylene blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Matos, M., Lomellini, P., & Favis, B. (mai 1994). Influence of some molecular parameters of the interfacial modifier on the emulsification of polystyrene/ethylene-propylene rubber blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Odje, S., Vu-Khanh, T., Cigana, P., & Favis, B. (1999). Influence of Triblock Copolymer Interfacial Modifiers on Fracture Behavior of Polystyrene/Ethylene-Propylene Rubber Blends. Polymer Engineering and Science, 39(7), 1265-1278. Lien externe
Polizu, S., Favis, B., & Vu-Khanh, T. (1999). Morphology-Interface-Property Relationships in Polystyrene/Ethylene-Propylene Rubber Blends. 2. Influence of Areal Density and Interfacial Saturation of Diblock and Triblock Copolymer Interfacial Modifiers. Macromolecules, 32(10), 3448-3456. Lien externe
Rizvi, A., Park, C. B., & Favis, B. (2015). Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils. Polymer (United Kingdom), 68, 83-91. Lien externe
Ravati, S., Beaulieu, C., Zolali, A. M., & Favis, B. (2014). High performance materials based on a self-assembled multiple-percolated ternary blend. AICHE Journal, 60(8), 3005-3012. Lien externe
Ravati, S., Poulin, S., Piyakis, K., & Favis, B. (2014). Phase identification and interfacial transitions in ternary polymer blends by ToF-SIMS. Polymer, 55(23), 6110-6123. Lien externe
Ravati, S., & Favis, B. (2013). Interfacial Coarsening of Ternary Polymer Blends With Partial and Complete Wetting Structures. Polymer, 54(25), 6739-6751. Lien externe
Ravati, S., & Favis, B. (2013). Tunable morphologies for ternary blends with poly(butylene succinate): Partial and complete wetting phenomena. Polymer (United Kingdom), 54(13), 3271-3281. Lien externe
Ravati, S., Beaulieu, C., Deschênes, L., Cao, V., & Favis, B. (avril 2012). Multi-component bio-based blends with polylactic acid and polyhydroxybutyrate: Morphology and physical properties [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Lien externe
Ravati, S., & Favis, B. (avril 2012). Multicomponent biodegradable blends with poly(butylene succinate): Partial and complete wetting phenomena [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Lien externe
Ravati, S., & Favis, B. (2011). 3D porous polymeric conductive material prepared using LbL deposition. Polymer, 52(3), 718-731. Lien externe
Ravati, S., & Favis, B. (2010). Low percolation threshold conductive device derived from a five-component polymer blend. Polymer, 51(16), 3669-3684. Lien externe
Ravati, S., & Favis, B. (2010). Morphological states for a ternary polymer blend demonstrating complete wetting. Polymer, 51(20), 4547-4561. Lien externe
Ravati, S., Virgilio, N., Jianhing, Z., & Favis, B. (août 2007). Structured multiple percolated polymer blends [Communication écrite]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA. Non disponible
Roy, X., Sarazin, P., & Favis, B. (2006). Ultraporous nanosheath materials by layer-by-layer deposition onto co-continuous polymer-blend templates. Advanced Materials, 18(8), 1015-1019. Lien externe
Rodriguez-Gonzales, F. J., Ramsay, B. A., & Favis, B. (2004). Rheological and thermal properties of thermoplastic starch with high glycerol content. Carbohydrate polymer, 58(2), 139-147. Lien externe
Riscanu, D., Favis, B., Feng, C. Y., & Matsuura, T. (2004). Thin-Film Membranes Derived From Co-Continuous Polymer Blends: Preparation and Performance. Polymer, 45(16), 5597-5609. Lien externe
Reignier, J., & Favis, B. (2003). Core-Shell Structure and Segregation Effects in Composite Droplet Polymer Blends. AICHE Journal, 49(4), 1014-1023. Lien externe
Reignier, J., Favis, B., & Heuzey, M.-C. (2003). Factors Influencing Encapsulation Behavior in Composite Droplet-Type Polymer Blends. Polymer, 44(1), 49-59. Lien externe
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. (2003). High performance LDPE/thermoplastic starch blends: A sustainable alternative to pure polyethylene. Polymer, 44(5), 1517-1526. Lien externe
Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. (2003). Influence of Melt Drawing on the Morphology of One- and Two-Step Processed Ldpe/Thermoplastic Starch Blends. Advances in Polymer Technology, 22(4), 297-305. Lien externe
Reignier, J., & Favis, B. (2003). On the presence of a critical shell volume fraction leading to pseudo-pure droplet behavior in composite droplet polymer blends. Polymer, 44(18), 5061-5066. Lien externe
Reignier, J., & Favis, B. (mai 2001). Composite drop viscosity ratio effect on the morphology of hdpe/ps/pmma ternary blends [Communication écrite]. Antec 2001, Dallas, Texas. Lien externe
Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. (mai 2001). Melt drawing of ldpe/thermoplastic starch blends [Communication écrite]. Antec 2001, Dallas, Texas. Lien externe
Rodriguez-Gonzalez, F., & Favis, B. (janvier 2001). Study of the rheological and thermal properties of thermoplastic starch [Communication écrite]. PPS-17, Montréal, Québec. Non disponible
Reignier, J., & Favis, B. (2000). Control of the subinclusion microstructure in HDPE/PS/PMMA ternary blends. Macromolecules, 33(19), 6998-7008. Lien externe
Reignier, J., & Favis, B. (janvier 2000). Controlling complex morphologies in immiscible polymer blends [Communication écrite]. PPS-16, Shanghai, China. Non disponible
Reignier, J., & Favis, B. (janvier 1999). Control of the su-inclusion microstructure in HDPE/PS/PMMA ternary blends [Communication écrite]. Polyblends 99, Industrial materials institue, Boucherville, Québec. Non disponible
Reignier, J., & Favis, B. (mai 1999). Sub-inclusion morphologies in hdpe/ps/pmma ternary blend [Communication écrite]. Antec '99. Volume II, New York. Lien externe
Schlachter, D. A., Lennox, M. D., Favis, B., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 10 pages. Lien externe
Sangroniz, L., Gancheva, T., Favis, B., Muller, A. J., & Santamaria, A. (2021). Rheology of complex biobased quaternary blends: Poly(lactic acid) poly(ethylene oxide) /poly(ether-b-amide)/poly(amide 11). Journal of Rheology, 65(3), 437-451. Lien externe
Sarazin, P., Li, G., Orts, W. J., & Favis, B. (2008). Binary and Ternary Blends of Polylactide, Polycaprolactone and Thermoplastic Starch. Polymer, 49(2), 599-609. Lien externe
Salehi, P., Sarazin, P., & Favis, B. (2008). Porous Devices Derived From Co-Continuous Polymer Blends as a Route for Controlled Drug Release. Biomacromolecules, 9(4), 1131-1138. Lien externe
Salehi, P., Sarazin, P., & Favis, B. (2007). Model porous polymer blends as a route for controlled release. PMSE Preprints, 97, 165-166. Non disponible
Sarazin, P., & Favis, B. (2007). Stability of the Co-Continuous Morphology During Melt Mixing for Poly(Epsilon-Caprolactone)/Polystyrene Blends. Journal of polymer science. Part B, Polymer physics, 45(7), 864-872. Lien externe
Sarazin, P., Virgilio, N., & Favis, B. (2006). Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks. Journal of Applied Polymer Science, 100(2), 1039-1047. Lien externe
Sarazin, P., Huneault, M. A., Orts, W., & Favis, B. (mai 2005). Blends of polylactide with thermoplastic starch [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Sarazin, P., & Favis, B. (2005). Influence of Temperature-Induced Coalescence Effects on Co-Continuous Morphology in Poly(Epsilon-Caprolactone)/Polystyrene Blends. Polymer, 46(16), 5966-5978. Lien externe
Sarazin, P., Roy, X., & Favis, B. (2004). Controlled Preparation and Properties of Porous Poly(L-Lactide) Obtained From a Co-Continuous Blend of Two Biodegradable Polymers. Biomaterials, 25(28), 5965-5978. Lien externe
Sarazin, P., Virgilio, N., & Favis, B. (septembre 2003). Morphology control in co-continuous poly(L-lactide)/polystyrene blends : a route towards highly structured and interconnected porosity in poly(L-lactide) materials [Communication écrite]. PPS 2003 Europe-Africa Meeting of the Polymer Processing Society, Athens, Greece. Non disponible
Sarazin, P., & Favis, B. (2003). Morphology Control in Co-Continuous Poly(L-Lactide)/Polystyrene Blends: a Route Towards Highly Structured and Interconnected Porosity in Poly(L-Lactide) Materials. Biomacromolecules, 4(6), 1669-1679. Lien externe
Sararin, P., & Favis, B. (mai 2001). Interfacial tension, phase inversion and co-continuity in poly(l-lactide) polystyrene blends [Communication écrite]. Antec 2001, Dallas, Texas. Lien externe
St-Pierre, N., Favis, B., Ramsay, B. A., Ramsay, J. A., & Verhoogt, H. (1997). Processing and characterization of thermoplastic starch/polyethylene blends. Polymer, 38(3), 647-655. Lien externe
St-Pierre, N., Favis, B., Ramsay, B. A., Ramsay, J. A., & Verghoogt, H. (janvier 1996). Thermoplastic starch/polyethylene blends [Communication écrite]. 12th annual meeting of the polymer processing society, Sorrento, Italy. Non disponible
St-Pierre, N., Favis, B., Ramsay, B. A., Ramsay, J. A., & Verhoogt, H. (octobre 1995). Thermoplastic starch/polyethylene blends [Communication écrite]. 1995 SPE Regional Technical Conference on Polymer Alloys and Blends/Polyblends'95, Boucherville, Can. Non disponible
Taguet, A., Bureau, M. N., Huneault, M. A., & Favis, B. (2014). Toughening mechanisms in interfacially modified HDPE/thermoplastic starch blends. Carbohydrate Polymers, 114, 222-229. Lien externe
Taghizadeh, A., & Favis, B. (2013). Carbon nanotubes in blends of polycaprolactone/thermoplastic starch. Carbohydrate Polymers, 98(1), 189-98. Lien externe
Taghizadeh, A., & Favis, B. (2013). Effect of high molecular weight plasticizers on the gelatinization of starch under static and shear conditions. Carbohydrate Polymers, 92(2), 1799-1808. Lien externe
Taghizadeh, A., Sarazin, P., & Favis, B. (2013). High molecular weight plasticizers in thermoplastic starch/polyethylene blends. Journal of Materials Science, 48(4), 1799-1811. Lien externe
Taghizadeh, A., & Favis, B. (avril 2012). Carbon nanotubes in blends of thermoplastic starch/polycaprolactone [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Lien externe
Taghizadeh, A., & Favis, B. (avril 2012). Effect of the molecular structure of plasticizer on the morphology of polymer blends with thermoplastic starch [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Lien externe
Taghizadeh, A., & Favis, B. (mai 2010). Effect of heat and shear on the gelatinization of thermoplastic starch with various plasticizers [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA. Lien externe
Taguet, A., Huneault, M. A., & Favis, B. (2009). Interface/morphology relationships in polymer blends with thermoplastic starch. Polymer, 50(24), 5733-5743. Lien externe
Tsou, A. H., Favis, B., Hara, Y., Bhadane, P. A., & Kirino, Y. (2009). Reactive compatibilization in brominated poly(isobutylene-co-p- methylstyrene) and polyamide blends. Macromolecular Chemistry and Physics, 210(5), 340-348. Lien externe
Tsou, A. H., Favis, B., Hara, Y., Bhadane, P. A., & Kirino, Y. (octobre 2007). Reactive compatibilization in polyamide and bimsm blends [Communication écrite]. 172nd ACS Rubber Division Meeting - Fall 2007, Cleveland, Ohio, USA. Non disponible
Tchomakov, K. P., Favis, B., Huneault, M. A., Champagne, M. F., & Tofan, F. (2005). Mechanical Properties and Morphology of Ternary Pp/Epdm/Pe Blends. Canadian Journal of Chemical Engineering, 83(2), 300-309. Lien externe
Tchomakov, K. P., Favis, B., Huneault, M. A., Champagne, M. F., & Tofan, F. (2004). Composite droplets with core/shell morphologies prepared from HDPE/PS/PMMA ternary blends by twin-screw extrusion. Polymer Engineering and Science, 44(4), 749-759. Lien externe
Tchomakov, K. P., Favis, B., Huneault, M. A., Champagne, M. F., & Tofan, F. Subinclusion morphologies in HDPE/PS/PMMA ternary blends prepared by twin screw extrusion [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Tremblay, A., Tremblay, S., Favis, B., Selmani, A., & L'Espérance, G. (1995). Locating the modifier in a polymer blend by electron energy-loss spectroscopy. Macromolecules, 28(13), 4771-4773. Lien externe
Tremblay, A., Tremblay, S., Favis, B., Selmani, A., & L'Espérance, G. (mai 1995). Spectroscopic analyses of compatibilized polymer blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Virgilio, N., & Favis, B. (2011). Self-assembly of Janus composite droplets at the interface in quaternary immiscible polymer blends. Macromolecules, 44(15), 5850-5856. Lien externe
Virgilio, N., Sarazin, P., & Favis, B. (2011). Ultraporous poly(l-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface. Polymer, 52(7), 1483-1489. Lien externe
Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. (2010). Modified interfacial tensions measured in situ in ternary polymer blends demonstrating partial wetting. Polymer, 51(6), 1472-1484. Lien externe
Virgilio, N., Sarazin, P., & Favis, B. (décembre 2010). Novel microstructures induced by partial wetting in ternary and quaternary immiscible polymer blends [Résumé]. 6th CREPEC Annual Colloquium, Montréal, Québec. Non disponible
Virgilio, N., Sarazin, P., & Favis, B. (octobre 2010). Novel microstructures induced by partial wetting in ternary and quaternary immiscible polymer blends [Résumé]. 60th Canadian Chemical Engineering Conference (CSCHE 2010), Sasktatoon, Saskatchewan. Non disponible
Virgilio, N., Sarazin, P., & Favis, B. (2010). Towards ultraporous poly(L-lactide) scaffolds from quaternary immiscible polymer blends. Biomaterials, 31(22), 5719-5728. Lien externe
Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. (2009). In situ measure of interfacial tensions in ternary and quaternary immiscible polymer blends demonstrating partial wetting. Macromolecules, 42(19), 7518-7529. Lien externe
Virgilio, N., Marc-Aurele, C., & Favis, B. (2009). Novel self-assembling close-packed droplet array at the interface in ternary polymer blends. Macromolecules, 42(9), 3405-3416. Lien externe
Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. (juin 2008). The Neumann triangle method to measure interfacial tensions in immiscible polymer blends using focused ion beam and atomic force microscopy [Communication écrite]. 24th Annual meeting of Polymer Processing Society, Salerno, Italy. Non disponible
Virgilio, N., Marc-Aurele, C., & Favis, B. (mai 2007). Novel self-assembling morphologies in multicomponent polymer blends [Communication écrite]. ANTEC 2007, Cincinnati, OH, United States. Lien externe
Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. (août 2007). Novel self-assembling pearl necklace microstructure induced by partial wetting in ternary polymer blends [Résumé]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA. Non disponible
Virgilio, N., Pépin, M. F., Desjardins, P., L'Espérance, G., & Favis, B. (août 2005). High contrast imaging of interphases in ternary polymer blends using focused ion beam preparation and atomic force microscopy [Communication écrite]. PPS 2005 America's Regional Meeting of the Polymer Processing Society, Québec, QC, Canada.. Non disponible
Virgilio, N., Favis, B., Pepin, M. F., Desjardins, P., & L'Espérance, G. (2005). High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy. Macromolecules, 38(6), 2368-2375. Lien externe
Verhoogt, H., Ramsay, B. A., Favis, B., & Ramsay, J. A. (1996). The influence of thermal history on the properties of poly(3-hydroxyburate-co-12%-3-hydroxyvalerate). Journal of Applied Polymer Science, 61(1), 87-96. Lien externe
Verhoogt, H., St-Pierre, N., Truchon, F. S., Ramsay, B. A., Favis, B., & Ramsay, J. A. (août 1994). Blends containing poly(hydroxybutyrate-co-12%-hydroxyvalerate) and thermoplastic starch [Communication écrite]. 4th Intenational symposium on bacterial polyhydroxyalkanoates, Montréal, Québec. Publié dans Canadian Journal of Microbiology, 41(SUP1). Lien externe
Verhoogt, H., Truchon, F. S., Favis, B., St-Pierre, N., & Ramsay, B. A. (mai 1995). Morphology and mechanical properties of blends containing thermoplastic starch and P(HB-co-12%-HV) [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Verhoogt, H., Ramsay, B. A., & Favis, B. (1994). Polymer blends containing poly(3-hydroxyalkanoate)s. Polymer, 35(24), 5155-5169. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. (2021). Surface Migration of Conductive PEBA in Ternary Polymer Blend Films with Different Wetting Morphologies. Macromolecules, 54(2), 5607-5617. Lien externe
Wang, J., Tsou, A. H., & Favis, B. (2018). Effects of Polyethylene Molecular Weight Distribution on Phase Morphology Development in Poly(p-phenylene ether) and Polyethylene Blends. Macromolecules, 51(22), 9165-9176. Lien externe
Wang, J., Tsou, A. H., Passino, H. L., & Favis, B. (2018). PPE-g-HDPE in high-performance Poly(p-Phenylene Ether)/Polyethylene Blends: Synthesis and compatibilization effects. Polymer, 138, 92-102. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. (2017). Continuity, morphology and surface resistivity in binary blends of poly(ether-block-amide) with polyethylene and polystyrene. European Polymer Journal, 91, 197-211. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. (2017). Controlling the continuity and surface migration of conductive poly(ether-block-amide) in melt processed cast-film blends. Polymer, 136, 224-234. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. (2016). Assembling Conductive PEBA Copolymer at the Continuous Interface in Ternary Polymer Systems: Morphology and Resistivity. Macromolecules, 49(14), 5115-5125. Lien externe
Wang, J., Reyna-Valencia, A., Chaigneau, R., & Favis, B. (2016). Controlling the Hierarchical Structuring of Conductive PEBA in Ternary and Quaternary Blends. Industrial & Engineering Chemistry Research, 55(50), 12848-12859. Lien externe
Wang, J., Lessard, B. H., Maric, M., & Favis, B. (2014). Hierarchically porous polymeric materials from ternary polymer blends. Polymer (United Kingdom), 55(16), 3461-3467. Lien externe
Weidong, W., Liang, H., Favis, B., & Schreiber, H. P. (2001). Surface modification strategies for multicomponent polymer systems. III : Effect of diblock copolymer-modified rutile on the morphology and mechanical properties of LLDPE/PVC blends. Journal of Applied Polymer Science, 81(8), 1891-1901. Lien externe
Xiang, Z., Sarazin, P., & Favis, B. (2009). Controlling burst and final drug release times from porous polylactide devices derived from co-continuous polymer blends. Biomacromolecules, 10(8), 2053-2066. Lien externe
Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173. Disponible
Yuan, Z., & Favis, B. (2006). Influence of the efficacy of interfacial modification on the coarsening of cocontinuous PS/HDPE blends during quiescent annealing. Journal of polymer science. Part B, Polymer physics, 44(4), 711-721. Lien externe
Yuan, Z. H., & Favis, B. (2005). Coarsening of Immiscible Co-Continuous Blends During Quiescent Annealing. AICHE Journal, 51(1), 271-280. Lien externe
Yuan, Z., & Favis, B. (2004). Macroporous polylactide of controlled pore size derived from the annealing of co-continuous polystyrene/polylactide blends. Biomaterials, 25(11), 2161-2170. Lien externe
Yuan, Z., & Favis, B. (mai 2002). Annealing of a co-continuous polystyrene/polylactide blend and its influence on the morphology [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe
Zolali, A. M., & Favis, B. (2018). Toughening of cocontinuous polylactide/polyethylene blends via an interfacially percolated intermediate phase. Macromolecules, 51(10), 3572-3581. Lien externe
Zolali, A. M., & Favis, B. (2017). Compatibilization and toughening of co-continuous ternary blends via partially wet droplets at the interface. Polymer, 114, 277-288. Lien externe
Zolali, A. M., & Favis, B. (2017). Partial to complete wetting transitions in immiscible ternary blends with PLA: the influence of interfacial confinement. Soft Matter, 13(15), 2844-2856. Lien externe
Zolali, A. M., Heshmati, V., & Favis, B. (2017). Ultratough co-continuous PLA/PA11 by interfacially percolated poly(ether-b-amide). Macromolecules, 50(1), 264-274. Lien externe
Zolali, A. M., & Favis, B. (2016). Partial and complete wetting in ultra-low interfacial tension multiphase blends with polylactide. Journal of Physical Chemistry B, 120(49), 12708-12719. Lien externe
Zolali, A. M., & Favis, B. (avril 2014). Morphology and physical properties of biodegradable multicomponent blends with polylactic acid [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Zhang, J. H., Ravati, S., Virgilio, N., & Favis, B. (2007). Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends. Macromolecules, 40(25), 8817-8820. Lien externe
