Documents dont l'auteur est "Cloutier, Guy"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : Article de revue | Rapport technique | Communication écrite | Chapitre de livre

Nombre de documents: 66

Article de revue

Vianna, P., Calce, S.-I., Boustros, P., Larocque-Rigney, C., Patry-Beaudoin, L., Luo, Y. H., Aslan, E., Marinos, J., Alamri, T. M., Vu, K.-N., Murphy-Lavallée, J., Billiard, J.-S., Montagnon, E., Li, H., Kadoury, S., Nguyen, B. N., Gauthier, S., Therien, B., Rish, I., ... Tang, A. (2023). Comparison of Radiologists and Deep Learning for US Grading of Hepatic Steatosis. Radiology, 309(1), e230659 (10 pages). Lien externe

Wang, D., Chayer, B., Destrempes, F., Poree, J., Roy Cardinal, M.-H., Tournoux, F., & Cloutier, G. (2022). Ultrafast Myocardial Principal Strain Ultrasound Elastography During Stress Tests: In Vitro Validation and In Vivo Feasibility. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 69(12), 3284-3296. Lien externe

Li, H., Poree, J., Chayer, B., Cardinal, M.-H. R., & Cloutier, G. (2020). Parameterized Strain Estimation for Vascular Ultrasound Elastography With Sparse Representation. IEEE Transactions on Medical Imaging, 39(12), 3788-3800. Lien externe

Garcia-Duitama, J., Chayer, B., Garcia, D., Goussard, Y., & Cloutier, G. (2017). Protocol for Robust In Vivo Measurements of Erythrocyte Aggregation Using Ultrasound Spectroscopy. Ultrasound in Medicine & Biology, 43(12), 2871-2881. Lien externe

Grasland-Mongrain, P., Yuankang, L., Lesage, F., Catheline, S., & Cloutier, G. (2016). Generation of shear waves by laser in soft media in the ablative and thermoelastic regimes. Applied Physics Letters, 109(22), 5 pages. Lien externe

Tripette, J., Nguyen Thi, L.-C., Allard, L., Robillard, P., Soulez, G., & Cloutier, G. (2015). In vivo venous assessment of red blood cell aggregate sizes in diabetic patients with a quantitative cellular ultrasound imaging method: Proof of concept. PLOS ONE, 10(4), e0124712. Lien externe

Abran, M., Cloutier, G., Cardinal, M.-H. R., Chayer, B., Tardif, J.-C., & Lesage, F. (2014). Development of a Photoacoustic, Ultrasound and Fluorescence Imaging Catheter for the Study of Atherosclerotic Plaque. IEEE Transactions on Biomedical Circuits and Systems, 8(5), 696-703. Lien externe

Majdouline, Y., Ohayon, J., Keshavarz-Motamed, Z., Roy Cardinal, M.-H., Garcia, D., Allard, L., Lerouge, S., Arsenault, F., Soulez, G., & Cloutier, G. (2014). Endovascular shear strain elastography for the detection and characterization of the severity of atherosclerotic plaques: In vitro validation and in vivo evaluation. Ultrasound in Medicine and Biology, 40(5), 890-903. Lien externe

Cloutier, G., Hugo, R., & Sellens, R. (2012). Mapping the Relationship Between the CDIO Syllabus and the CEAB Graduate Attributes. International Journal of Quality Assurance in Engineering and Technology Education, 2(2), 34-44. Lien externe

Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe

Slamani, M., Mayer, J. R. R., & Cloutier, G. (2011). Modeling and experimental validation of machine tool motion errors using degree optimized polynomial including motion hysteresis. Experimental Techniques, 35(1), 37-44. Lien externe

Hamelin, B., Goussard, Y., Dussault, J.-P., Cloutier, G., Beaudoin, G., & Soulez, G. (2010). Design of iterative ROI transmission tomography reconstruction procedures and image quality analysis. Medical Physics, 37(9), 4577-4589. Lien externe

Onat Ekinci, T., Mayer, J. R. R., & Cloutier, G. (2009). Investigation of accuracy of aerostatic guideways. International Journal of Machine Tools and Manufacture, 49(6), 478-487. Lien externe

Nguyen Thi, L.-C., Yu, F. T. H., & Cloutier, G. (2008). Cyclic changes in blood echogenicity under pulsatile flow are frequency dependent. Ultrasound in Medicine & Biology, 34(4), 664-673. Lien externe

Wang, X., Baron, L., & Cloutier, G. (2008). Topological and Geometrical Synthesis of Three-Degree-of-Freedom Fully Parallel Manipulators by Instantaneous Kinematics. Journal of Mechanical Design, 130(3), 032301 (8 pages). Lien externe

Wang, X., Baron, L., & Cloutier, G. (2008). Topology of Serial and Parallel Manipulators and Topological Diagrams. Mechanism and Machine Theory, 43(6), 754-770. Lien externe

Perron, J., Corbiere, M., Coallier, J. C., & Cloutier, G. (2006). The School-to-Work Transition: a Multitheoretical and Longitudinal Model. Psychologie du travail et des organisations, 12(3), 211-224. Lien externe

Genevès, C., Wilquem, F., Treyve, F., Cloutier, G., Soulez, G., & Saidane, K. (2005). Study of non stationary mode flow of an abdominal aortic aneurysm. Journal of Applied Biomaterials and Biomechanics, 3(3), 176-183. Lien externe

Maurice, R. L., Ohayon, J., Fretigny, Y., Bertrand, M., Soulez, G., & Cloutier, G. (2004). Noninvasive Vascular Elastography: Theoretical Framework. IEEE Transactions on Medical Imaging, 23(2), 164-180. Lien externe

Phan, A. V., Baron, L., Mayer, J. R. R., & Cloutier, G. (2003). Finite Element and Experimental Studies of Diametral Errors in Cantilever Bar Turning. Applied Mathematical Modelling, 27(3), 221-232. Lien externe

Benea, R., Fortin, C., & Cloutier, G. (2002). Analyse de tolérances en fabrication tenant compte des dispersions de procédés et des erreurs machines-outils : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 39-59. Lien externe

Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797. Lien externe

Brunette, J., Mongrain, R., Cloutier, G., Bertrand, M., Bertrand, O. F., & Tardif, J.-C. (2001). A Novel Realistic Three-Layer Phantom for Intravascular Ultrasound Imaging. International Journal of Cardiovascular Imaging, 17(5), 371-381. Lien externe

Mayer, J. R. R., Phan, A. V., & Cloutier, G. (2000). Prediction of Diameter Errors in Bar Turning: a Computationally Effective Model. Applied Mathematical Modelling, 24(12), 943-956. Lien externe

Phan, A. V., Cloutier, G., & Mayer, J. R. R. (1999). Finite element model for predicting tapered workpiece deflections in turning. Computer modeling and simulation in engineering, 4(2), 138-142. Non disponible

Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (1999). A Finite-Element Model With Closed-Form Solutions to Workpiece Deflections in Turning. International Journal of Production Research, 37(17), 4039-4051. Lien externe

Cloutier, G., Mayer, J. R. R., & Phan, A.-V. (1999). Singularity function representation in obtaining closed-form solutions to workpiece deflections in turning multi-diameter bars. Computer modeling and simulation in engineering, 4(2), 133-137. Non disponible

Fontaine, I., Bertrand, M., & Cloutier, G. (1999). A System-Based Approach to Modeling the Ultrasound Signal Backscattered by Red Blood Cells. Biophysical Journal, 77(5), 2387-2399. Lien externe

Cloutier, G., & Gourdeau, R. (1998). Task Constraints Specification Via Optimized Hyperellipsoids. International Journal of Robotics Research, 17(3), 294-304. Lien externe

Mayer, J. R. R., Cloutier, G., & Fortin, C. (1997). Quadrilateration and measurement site identification with dual scanning axis laser tracking interferometers. Measurement: Journal of the International Measurement Confederation, 20(3), 171-187. Lien externe

Cloutier, G., Gourdeau, R., & St-Arneault, C. (1996). Dual conformance index-based robotic arm placement and adaptation. Journal of Robotic Systems, 13(4), 187-202. Lien externe

Gourdeau, R., Cloutier, G., & Laflamme, J. (1996). Parameter identification of a semi-flexible kinematic model for serial manipulators. Robotica, 14(3), 311-319. Lien externe

Cleroux, L., Gourdeau, R., & Cloutier, G. (1995). Semi-flexible kinematic model for serial manipulators. Robotica, 13(4), 385-395. Lien externe

Cloutier, G., Jutard, A., & Betemps, M. (1994). Robot-task conformance index for the design of robotized cells. Robotics and Autonomous Systems, 13(4), 233-243. Lien externe

Durand, L.-G., De Guise, J., Cloutier, G., Guardo, R., & Brais, M. (1986). Evaluation of FFT-Based and Modern Parametric Methods for the Spectral Analysis of Bioprosthetic Valve Sounds. IEEE Transactions on Biomedical Engineering, BME-33(6), 572-578. Lien externe

Rapport technique

Cloutier, G., & Smith, B. T. (1986). Opportunity cost evaluation with a price change anticipation. (Rapport technique n° EPM-RT-86-50). Accès restreint

Communication écrite

Vianna, P., Kulbay, M., Boustros, P., Calce, S.-I., Larocque-Rigney, C., Patry-Beaudoin, L., Luo, Y. H., Chaudary, M., Kadoury, S., Nguyen, B., Montagnon, E., Belilovsky, E., Wolf, G., Chasse, M., Tang, A., & Cloutier, G. (septembre 2023). Automated liver segmentation and steatosis grading using deep learning on B-mode ultrasound images [Communication écrite]. IEEE International Ultrasonics Symposium (IUS 2023), Montreal, Qc, Canada (4 pages). Lien externe

Li, H., Cloutier, G., Kadoury, S., & Soulez, G. (septembre 2020). A 3D motion tracking algorithm using ultrasound B-mode images: A feasibility study [Communication écrite]. IEEE International Ultrasonics Symposium (IUS 2020), Las Vegas, Nevada (4 pages). Lien externe

Lu, Y., Abran, M., Cloutier, G., & Lesage, F. (janvier 2018). Catheter-based time-gated near-infrared fluorescence/OCT imaging system [Communication écrite]. Diagnostic and Therapeutic Applications of Light in Cardiology, San Francisco, CA. Lien externe

Garcia-Duitama, J., Chayer, B., Goussard, Y., & Cloutier, G. (septembre 2016). Segmentation of blood layers with particle image velocimetry (PIV) for reproducible in vivo characterization of erythrocyte aggregation [Communication écrite]. IEEE International Ultrasonics Symposium (IUS 2016), Tours, France (4 pages). Lien externe

Montagnon, E., Hissoiny, S., Despres, P., & Cloutier, G. (juillet 2012). Real-time processing in dynamic ultrasound elastography: a GPU-based implementation using CUDA [Communication écrite]. 2012 11th International Conference on Information Sciences, Signal Processing and their Applications (ISSPA), Piscataway, NJ, USA. Lien externe

Cloutier, G., Savard, P., & Boudreault, Y. (juin 2011). Towards a scale and tool for the appraisal of CEAB attributes - Progress report on a field test [Communication écrite]. 2nd Annual CEEA Conference, Memorial University St. John's, Newfoundland (6 pages). Publié dans Proceedings of the ... CEEA Conference. Lien externe

Gendron, D., Goussard, Y., Hamelin, B., Dussault, J.-P., Beaudoin, G., Cloutier, G., Chartrand-Lefebvre, C., Hadjadj, S., & Soulez, G. (juillet 2011). 3D iterative helical targeted CT. Application to contrast-enhanced vascular imaging [Communication écrite]. 11th International Meeting on Fully Three-Dimensional Image Reconstruction in Radiology and Nuclear Medicine, Potsdam, Germany. Lien externe

Cloutier, G., Sellens, R. W., Hugo, R. J., Camarero, R., & Fortin, C. (juin 2010). Outcomes Assessment and Curriculum Improvement Through the Cyclical Review of Results - A Model to Satisfy CEAB-2009 Accreditation Requirements [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, 2010, Queen's University Kingston, Ontario (6 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible

Schmitt, C., Henni, A. H., & Cloutier, G. (novembre 2008). Dynamic micro-elastography applied to the viscoelastic characterization of a mimicking artery and a porcine aorta [Communication écrite]. IEEE Ultrasonics Symposium, Beijing, China (4 pages). Lien externe

Chayer, B., De Guise, J. A., & Cloutier, G. (mai 2008). Effect of depth of correlation on cross-correlation blood flow measurements in glass microchannels [Communication écrite]. 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro, Paris, France (4 pages). Lien externe

Hamelin, B., Goussard, Y., Gendron, D., Dussault, J.-P., Cloutier, G., Beaudoin, G., & Soulez, G. (mai 2008). Iterative CT reconstruction of real data with metal artifact reduction [Communication écrite]. IEEE International Symposium on Biomedical Imaging: From Macro to Nano (ISBI '08), Paris, France. Lien externe

Gendron, D., Goussard, Y., Beaudoin, G., Soulez, G., & Cloutier, G. (août 2008). Reconstruction of real tomographic data using algebraic methods [Communication écrite]. 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2008, Vancouver, BC, Canada. Lien externe

Ekinci, T. O., Mayer, J. R. R., & Cloutier, G. (mai 2023). Thermal Distortion Modeling on CMM Structures [Communication écrite]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec. Non disponible

Wang, X., Baron, L., & Cloutier, G. The Design of Parallel Manipulators of Delta Topology Under Isotropic Constraints [Communication écrite]. 11th World Congress in Mechanism and Machine Science. Non disponible

Wang, X., Baron, L., & Cloutier, G. (mai 2003). Design manifold of translational parallel manipulators [Communication écrite]. CCToMM Symposium on Mechanisms, Machines and Mechatronics, Montréal, Québec. Lien externe

Dupont, Y., Cloutier, G., & Mayer, J. R. R. Identification Method for Scale, Pitch and Yaw Deviations With Linear Measurements [Communication écrite]. Laser Metrology and Machine Performance VI. Non disponible

Wang, X., Baron, L., & Cloutier, G. (juin 2003). Kinematic modelling and isotropic conditions of a family of translational parallel manipulators [Communication écrite]. 4th International Conference on Control and Automation (ICCA 2003), Montréal, Québec. Lien externe

Wang, X., Baron, L., & Cloutier, G. (janvier 2003). Synthèse des manipulateurs parallèles [Communication écrite]. 3e Journée d'étude interinstitutionnelle de fabrication haute performance, Bécancour, QC. Non disponible

Baron, L., Wang, X., & Cloutier, G. (janvier 2002). Isotropic conditions of parallel manipulators of delta topology [Communication écrite]. Advances in Robot Kinematics: Theory and Applications, Clades de Malavella, Espagne. Lien externe

Benea, R., Cloutier, G., & Fortin, C. (avril 2001). Process Plan Validation Including Process Deviations and Machine-tool Errors [Communication écrite]. 7th CIRP International Seminar on Computer Aided Tolerancing, Cachan, France. Non disponible

Cloutier, G., Mayer, J. R. R., & Aussel, W. (janvier 2000). Study of the co-calibration of the scale error of a prismatic joint and of a step gauge by shearing of reversal techniques [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec. Non disponible

Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (janvier 1999). Investigation into diametral error modeling in bar turning [Communication écrite]. NSF Grantees Conference, Los Angeles, USA. Non disponible

Gaudette, P., Cloutier, G., & Fortin, C. (janvier 1999). Validation of a process plan by propagated dispersion zones [Communication écrite]. 6th CIRP International Seminar on Computer-Aided Tolerancing, Netherlands. Non disponible

Mayer, J. R. R., Andrian, R., Cloutier, G., & Fortin, C. (janvier 1998). Artefact probing for machine tool and process diagnosis [Communication écrite]. 13th Annual Meeting American Society for Precision Engineering, St-Louis, Missouri. Non disponible

Mayer, J. R. R., Andrian, R., Fortin, C., & Cloutier, G. (janvier 1998). Machine tool capability diagnostic by touch probing [Communication écrite]. CSME Forum, Toronto, Canada. Non disponible

Cloutier, G., Gourdeau, R., & Laflamme, J. (janvier 1997). Improving the accuracy of industrial robots using a semi-flexible kinematic model: experimental results [Communication écrite]. Forum de la Société canadienne de génie mécanique, Toronto, Canada. Non disponible

Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (juillet 1997). Interactive computer aided process planning system for manufacturing, assembly and inspection [Communication écrite]. 32nd International MATADOR Conference, Manchester, U.K.. Lien externe

Mayer, J. R. R., Andrian, R., Fortin, C., Cloutier, G., & Luong, T. (juillet 1997). Performance verification and monitoring of nc machine-tools for in-process part measurement by touch probing [Communication écrite]. 32nd International MATADOR Conference, Manchester, UK. Lien externe

Cloutier, G., & Shung, K. K. (octobre 1992). The effect of turbulence on the variation of the ultrasonic Doppler amplitude within the cardiac cycle [Communication écrite]. 14th annual International Conference of the IEEE Engineering in Medicine and Biology Society, Paris, France (2 pages). Lien externe

Chapitre de livre

Benea, R., Cloutier, G., & Fortin, C. (2003). Process Plan Validation Including Process Deviations and Machine-Tool Errors. Dans Geometric Product Specification and Verification: Integration of Functionality (p. 197-206). Lien externe

Liste produite: Fri Dec 20 05:15:16 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0