 | Up a level |
Achiche, S., Balazinski, M., Baron, L., & Jemielniak, K. (2002). Tool wear monitoring using genetically-generated fuzzy knowledge bases. Engineering Applications of Artificial Intelligence, 15(3-4), 303-314. External link
Aissaoui, R., Arabi, H., Lacoste, M., Zalzal, V., & Dansereau, J. (2002). Biomechanics of Manual Wheelchair Propulsion in Elderly - System Tilt and Back Recline Angles. American Journal of Physical Medicine & Rehabilitation, 81(2), 94-100. External link
Allam, M. A., Bazergui, A., Marchand, L., & Derenne, M. (2002, January). Tube-to-tubesheet joints: maximum tensile stress and contact pressure due to thermal loading and temperature cycling [Paper]. ASME international joint power generation conference-IJPGC 2002, Phoenix, Arizona. External link
Allam, M., & Bazergui, A. (2002). Axial Strength of Tube-to-Tubesheet Joints: Finite Element and Experimental Evaluations. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 22-31. External link
Arghavani, J., Derenne, M., & Marchand, L. (2002). Prediction of gasket leakage rate and sealing performance through fuzzy logic. International Journal of Advanced Manufacturing Technology, 20(8), 612-620. External link
Assandé, K. K. E. (2002). Mise en œuvre d'une méthode automatisée et interactive de modification de réseaux d'échangeurs de chaleur [Master's thesis, École Polytechnique de Montréal]. Unavailable
Balasoiu, B. A. (2002). Nouvelle méthode de désassemblage virtuel pour la génération de gammes [Master's thesis, École Polytechnique de Montréal]. Unavailable
Balazinski, M., & Przybylo, A. (2002, January). Animations as support for the teaching of the manufacturing [Paper]. ASEE Annual Conference and Exposition, Montréal, Québec. External link
Balazinski, M., Baron, L., & Achiche, S. (2002, May). Rule-set optimization in genetically-generated fuzzy knowledge bases [Paper]. Optimization Days 2002, Montréal, Québec. Unavailable
Balazinski, M., Czogala, E., Jemielmak, K., & Leski, J. (2002). Tool condition monitoring using artificial intelligence methods. Engineering Applications of Artificial Intelligence, 15(1), 73-80. External link
Baron, L., Wang, X., & Cloutier, G. (2002, January). Isotropic conditions of parallel manipulators of delta topology [Paper]. Advances in Robot Kinematics: Theory and Applications, Clades de Malavella, Espagne. External link
Bazergui, A., Biron, A., Bui-Quoc, T., Laberge, C., & McIntyre, G. (2002). Résistance des matériaux. Unavailable
Béchet, É. (2002). Résolution d'un problème aux limites à frontière libre au moyen d'un algorithme de remaillage adaptatif et anisotrope [Ph.D. thesis, École Polytechnique de Montréal]. Available
Bechet, E., Cuilliere, J. C., & Trochu, F. (2002). Generation of a Finite Element Mesh From Stereolithography (Stl) Files. Computer Aided Design, 34(1), 1-17. External link
Bechet, E., Cuilliere, J.-C., & Trochu, F. (2002). Génération d'un maillage pour éléments finis à partir de fichiers de stéréolithographie (STL) : une interface indépendante des formats CAO : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 9-37. Unavailable
Bellemare, S. C., Bureau, M. N., Denault, J., & Dickson, J. I. Fatigue resistance of polyamide 6 and polyamide 6/clay nanocomposite [Paper]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. External link
Benea, R., Fortin, C., & Cloutier, G. (2002). Analyse de tolérances en fabrication tenant compte des dispersions de procédés et des erreurs machines-outils : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 39-59. Unavailable
Benhadji, K., Robillard, L., & Vasseur, P. (2002). Convection in a porous cavity saturated with water near 4°C and subject to Dirichlet-Neumann thermal boundary conditions. International Communications in Heat and Mass Transfer, 29(7), 897-906. External link
Bentamy, A., Trépanier, J.-Y., & Guibault, F. (2002, January). Wing shape optimization using a constrained NURBS surface geometrical representation [Paper]. 23rd International Congress of Aeronautical Sciences. External link
Benzaouia, A., Boukas, E.-K., & Daraoui, N. (2002, July). Stability of continuous-time linear systems with Markovian jumping parameters and constrained control [Paper]. 15th World Congress of the International Federation of Automatic Control, Barcelona, Spain. External link
Bernier, M. (2002, January). Uncertainty in the design length calculation for vertical ground heat exchangers [Paper]. 2002 ASHRAE Winter Meeting, Atlantic City, NJ. External link
Bilgen, E. (2002). Natural Convection in Enclosures With Partial Partitions. Renewable Energy, 26(2), 257-270. External link
Bilgen, E., & Richard, M. A. (2002). Horizontal Concrete Slabs as Passive Solar Collectors. Solar Energy, 72(5), 405-413. External link
Birembaut, Y., & Marchand, L. (2002). Characterization of bolted flanged joints subjected to pressure and external bending moments. Welding Research Council Bulletin, 473. Unavailable
Bolduc, D. (2002). Évaluation des performances d'une roue de ventilateur centrifuge [Master's thesis, École Polytechnique de Montréal]. Unavailable
Borggaard, J., Hétu, J.-F., & Pelletier, D. (2002, January). Parametric uncertainty analysis in phase change model [Paper]. AIAA 2002-5601, 9th AIAA/ISSMO symposium on MDAO, Atlanta, Georgia. External link
Borggaard, J., Hétu, J.-F., & Pelletier, D. (2002, January). Sensitivity and uncertainty analysis for conjugate phase change problems [Paper]. 10th annual conference on the CFD society of Canada. Unavailable
Borggaard, J., Pelletier, D., & Vugrin, K. (2002, January). Sensitivity analysis for problems with numerical noise [Paper]. AIAA 2002-5553, 9th AIAA/ISSMO symposium on MDAO, Atlanta, Georgia. External link
Boudaouara, A., Bouti, A., & Sanschagrin, B. (2002, May). Optimization of thermal sprue for hot runner molds [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link
Bougherara, H. (2002). Étude de la stabilité d'un écoulement parallèle dans une cavité verticale soumise à des flux de chaleur uniformes [Master's thesis, École Polytechnique de Montréal]. Unavailable
Boukas, E.-K., & Benzaouia, A. (2002). Stability of Discrete-Time Linear Systems With Markovian Jumping Parameters and Constrained Control. IEEE Transactions on Automatic Control, 47(3), 516-521. External link
Boukas, E.-K., & Communal, A. (2002, December). Production and corrective maintenance planning control problem for failure-prone manufacturing systems [Paper]. 41st IEEE Conference on Decision and Control, New Orleans, Louisiana. External link
Boukas, E.-K., & Liu, Z. K. (2002, December). Guaranteed cost control for discrete-time Markovian jump linear system with mode-dependent time-delays [Paper]. 41st IEEE Conference on Decision and Control, New Orleans, Louisiana. External link
Boukas, E.-K., & Liu, Z. K. (2002). Robust H∞ filtering for polytopic uncertain time-delay systems with Markov jumps. Computers and Electrical Engineering, 28(3), 171-193. External link
Boukas, E.-K., & Liu, Z. K. (2002). Suboptimal regulators for discrete-time jump linear systems with time-multiplied performance index. Journal of Optimization Theory and Applications, 115(1), 49-65. External link
Boukas, E.-K., & Liu, Z.-K. (2002). Deterministic and Stochastic Time-Delay Systems. External link
Boukas, E.-K., Liu, Z. K., & Shi, P. (2002). Delay-dependent stability and output feedback stabilisation of Markov jump system with time-delay. IEE Proceedings-Control Theory and Applications, 149(5), 379-386. External link
Boukas, E.-K., Shi, P., Karan, M., & Kaya, C. Y. (2002). Linear discrete-time systems with Markovian jumps and mode dependent time-delay: Stability and stabilizability. Mathematical Problems in Engineering, 8(2), 123-133. Available
Boukehili, H. (2002). Effet des charges et des additifs sur les propriétés physiques et mécaniques des composites pultrudés [Master's thesis, École Polytechnique de Montréal]. Unavailable
Bouressace, Z., Souahi, A. H., Yahia, L., & Bourbia, O. (2001, September). Study of the Influence of the Parameters Acting on the Thermomechanical Properties of Refractory Bricks [Paper]. 7th Conference and Exhibition of the European Ceramic Society, Brugge, Belgium. Published in Key Engineering Materials, 206-213(3). External link
Boutana, M. N. (2002). Convection naturelle dans un milieu poreux soumis à l'effet Soret [Master's thesis, École Polytechnique de Montréal]. Unavailable
Bouzid, A. H., & Derenne, M. (2002). Analytical Modeling of the Contact Stress With Nonlinear Gaskets. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 47-53. External link
Brailovski, V., Terriault, P., & Trochu, F. (2002). Thermal snap switch. (Patent Application no. CA2314955). External link
Brown, W., Derenne, M., & Bouzid, A.-H. (2002, August). Determination of Gasket Stress Levels During Thermal Transients [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2002), Vancouver, BC, Canada. External link
Bureau, M. N., Perrin, F., Denault, J., & Dickson, J. I. (2002). Interlaminar Fatigue Crack Propagation in Continuous Glass Fiber/Polypropylene Composites. International Journal of Fatigue, 24(2-4), 99-108. External link
Chedmail, P., Cognet, G., Fortin, C., Mascle, C., & Pegna, J. (2002). Integrated design and manufacturing in mechanical engineering. Unavailable
Cheriet, F., Remaki, L., Bellefleur, C., Koller, A., Labelle, H., & Dansereau, J. (2002, May). A new X-ray calibration / reconstruction system for 3D clinical assessment of spinal deformities [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Cisse, O., Savadogo, O., Wu, M., & Yahia, L. (2002). Effect of surface treatment of NiTi alloy on its corrosion behavior in Hanks' solution. Journal of Biomedical Materials Research, 61(3), 339-345. External link
Clément, É. (2002). Étude de l'influence de la concentration de contraintes sur le comportement thermomécanique des alliages à mémoire de forme [Master's thesis, École Polytechnique de Montréal]. Unavailable
Coma, O., Mascle, C., & Véron, P. (2002, January). Feature shape recognition tools dedicated to a design for assembly methodology [Paper]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Unavailable
Communal, A. (2002). Ligne de transfert : contrôle de production et de maintenance [Master's thesis, École Polytechnique de Montréal]. Unavailable
Crampon, M. A., Brailovski, V., Sawan, M., & Trochu, F. (2002). Nerve cuff electrode with shape memory alloy armature: design and fabrication. Bio-Medical Materials and Engineering, 12(4), 397-410. External link
Daly, H. B., Cole, K. C., Ajji, A., Nguyen, K. T., & Sanschagrin, B. (2002, May). Molecular orientation in injection-blow-molded bottles [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link
Degan, G., & Vasseur, P. (2002). Aiding Mixed Convection Through a Vertical Anisotropic Porous Channel With Oblique Principal Axes. International Journal of Engineering Science, 40(2), 193-209. External link
Degan, G., Zohoun, S., & Vasseur, P. (2002). Forced Convection in Horizontal Porous Channels With Hydrodynamic Anisotropy. International Journal of Heat and Mass Transfer, 45(15), 3181-3188. External link
Delahave, R., Bahloul, A., & Vasseur, P. (2002). Influence of the Soret effect on convection in a binary fluid layer with a free upper surface. International Communications in Heat and Mass Transfer, 29(4), 433-442. External link
Demers, C. N., Tabrizian, M., Petit, A., Hamdy, R. C., & Yahia, L. (2002). Effect of Experimental Parameters on the in Vitro Release Kinetics of Transforming Growth Factor Beta 1 From Coral Particles. Journal of Biomedical Materials Research, 59(3), 403-410. External link
Demers, C., Hamdy, C. R., Corsi, K., Chellat, F., Tabrizian, M., & Yahia, L. (2002). Natural Coral Exoskeleton as a Bone Graft Substitute: a Review. Bio-Medical Materials and Engineering, 12(1), 15-35. External link
Duke, K., Dansereau, J., Labelle, H., Koller, A., Joncas, J., & Aubin, C.-É. (2002, May). Study of patient positioning on a dynamic frame for scoliosis surgery [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Elektorowicz, M., Balazinski, M., & Qasaimeh, A. (2002, January). Application of the artificial intelligence to estimate the constructed wetland response to heavy metal removal [Paper]. Joint CSCE/ASCE International Conference on Environmental Engineering, Niagara Falls, Ontario. Unavailable
Farinas, M. I., Garon, A., Jullien, S., Carrier, M., & Savard, P. (2002, August). In vivo assessment of lvad work output. [Paper]. 29th Conference of the European Society for Artificial Organs on Bridging to Regeneration, Vienna, Austria. Published in International Journal of Artificial Organs, 25(7). Unavailable
Farinas, M.-I. (2002). Méthodologie de design de turbomachines de petite taille appliquée au développement d'une pompe d'assistance cardiaque [Ph.D. thesis, École Polytechnique de Montréal]. Available
Feipel, V., Aubin, C.-É., Ciolofan, O. C., Beausejour, M., Labelle, H., & Mathieu, P. A. (2002). Electromyogram and Kinematic Analysis of Lateral Bending in Idiopathic Scoliosis Patients. Medical & Biological Engineering & Computing, 40(5), 497-505. External link
Fujimoto, S., Bilgen, E., & Ogura, H. (2002). CaO/Ca(OH)₂ chemical heat pump system. Energy Conversion and Management, 43(7), 947-960. External link
Furet, B., Hascoet, J.-Y., & Balazinski, M. (2002, January). Application in integrated mechanical design: a concurent engineering project [Paper]. ASEE Annual Conference and Exposition, Montréal, Québec. External link
Garon, A., & Manseau, J. (2002, August). A numerical study of albumin transport through normal and damaged endothelium [Paper]. 29th Conference of the European Society for Artificial Organs on Bridging to Regeneration, Vienna, Austria. Published in International Journal of Artificial Organs, 25(7). Unavailable
Gou, M. (2002). Le virage à droite au feu rouge au Québec. (Technical Report n° P2823). Unavailable
Gou, M., & Bellavigna-Ladoux, O. (2002). Impact des véhicules lourds sur la sécurité aux passages à niveau. (Technical Report n° P2799). Unavailable
Gougam, M. M. (2002). Influence de la vitesse sur le risque d'être impliqué dans une collision grave ou mortelle en milieu urbain [Master's thesis, École Polytechnique de Montréal]. Unavailable
Gouttebroze, S. (2002). Amélioration du code CANICE par des méthodes d'approximation et validation [Master's thesis, École Polytechnique de Montréal]. Unavailable
Gréalou, L., Aubin, C.-É., & Labelle, H. (2002). Rib cage surgery for the treatment of scoliosis: a biomechanical study of correction mechanisms. Journal of Orthopaedic Research, 20(5), 1121-8. External link
Guibault, F., Bentamy, A., & Trépanier, J.-Y. (2002, January). Constraints specifications on nurbs surfaces for wing geometric representation [Paper]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta. External link
Guibault, F., Camarero, R., & Vu, T. C. (2002, January). Issues in hydraulic design automation [Paper]. Hydro 2002, Turquie. Unavailable
Guo, H., & Verreman, Y. (2002, January). Evaluation of multiaxial fatigue parameters for predicting axial-torsional high cycle fatigue life of ferritic-pearlitic steels [Paper]. Fatigue 2002 EMAS. Unavailable
Hagemeister, N., Duval, N., Yahia, L., Krudwig, W., Witzel, U., & De Guise, J. A. (2002). Comparison of Two Methods for Reconstruction of the Posterior Cruciate Ligament Using a Computer Based Method: Quantitative Evaluation of Laxity, Three-Dimensional Kinematics and Ligament Deformation Measurement in Cadaver Knees. KNEE, 9(4), 291-299. External link
Hagemeister, N., Duval, N., Yahia, L., Krudwig, W., Witzel, U., & De Guise, J. A. (2002). Computer-Based Method for the 3-D Kinematic Analysis of Posterior Cruciate Ligament and Postero-Lateral Corner Lesions. KNEE, 9(4), 301-308. External link
Hagemeister, N., Long, R., Yahia, L., Duval, N., Krudwig, W., Witzel, U., & De Guise, J. A. (2002). Quantitative Comparison of Three Different Types of Anterior Cruciate Ligament Reconstruction Methods: Laxity and 3-D Kinematic Measurements. Bio-Medical Materials and Engineering, 12(1), 47-57. External link
Havugimana, P. C., Lutz, C., Saeed, F., Paraschivoiu, I., Kerevanian, G.-K., Sidorenko, A., Benard, E., Cooper, R. K., & Raghunathan, R. S. (2002, June). A comparison of skin friction and heat transfer prediction by various roughness models [Paper]. 20th AIAA Applied Aerodynamics Conference, St. Louis, MO. External link
Hébert, A. (2002, June). Scripting Dragon [Paper]. 23th Annual CNS Conference (CSN 2002), Toronto, ON. Unavailable
Hébert, A., & Coste, M. (2002). Computing moment-based probability tables for self-shielding calculations in lattice codes. Nuclear Science and Engineering, 142(3), 245-257. External link
Hernandez, R., Polizu, S., Turenne, S., & Yahia, L. (2002). Characteristics of Porous Nickel-Titanium Alloys for Medical Applications. Bio-Medical Materials and Engineering, 12(1), 37-45. External link
Janzen, V. P., Hagberg, E. G., Patrick, J. F., Pettigrew, M. J., Taylor, C. E., & Whan, T. G. (2002, January). Vibration and work-rate measurements of steam generator u-tubes in air-water cross-flow [Paper]. 5th international symposium on FSI, AE and FIV + N, ASME international mechanical engineering congress and exhibition, New Orleans, Louisiana, USA. External link
Jaremko, J. L., Poncet, P., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002). Comparison of Cobb Angles Measured Manually, Calculated from 3-D Spinal Reconstruction, and Estimated from Torso Asymmetry. Computer Methods in Biomechanics and Biomedical Engineering, 5(4), 277-81. External link
Jaremko, J. L., Poncet, P., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002). Genetic Algorithm-Neural Network Estimation of Cobb Angle From Torso Asymmetry in Scoliosis. Journal of Biomechanical Engineering-Transactions of the Asme, 124(5), 496-503. External link
Jaremko, J. L., Poncet, P., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002). Indices of Torso Asymmetry Related to Spinal Deformity in Scoliosis. Clinical Biomechanics, 17(8), 559-568. External link
Koutchouk, M., Gou, M., Benoit, R., Olteanu, M., & Aubin, C.-É. (2002, June). Modeling of safety systems to improve driver's safety during lift truck lateral tip overs [Paper]. SAE International Conference and Exposition of Digital Human Modeling for Design and Engineering, Munich, Allemagne. Unavailable
Labbé, P., Guibault, F., Dompierre, J., Tribes, C., Vallet, M.-G., & Trépanier, J.-Y. (2002, January). Pirate - Towards a STEP compliant MDO environnement [Paper]. 40th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV. External link
Lacasse, D., Pelletier, D., & Garon, A. (2002, January). Adaptative finite element model for hemolysis prediction [Paper]. 10th annual conference of the CFD society of Canada. Unavailable
Lachance, D., Bernier, M., Castaing-Lasvignottes, J., & Meunier, F. Simulation dynamique d'une machine à adsorption : application à un cycle cascade bi-étage [Paper]. e-Sim 2002 : the Canadian conference on building energy simulation. Unavailable
Langlois, M., Masson, C., Kafyeke, F., & Paraschivoiu, I. (2002). Automated Method for Transition Prediction on Wings in Transonic Flows. Journal of Aircraft, 39(3), 460-468. External link
Le Cunff, C., Biolley, F., Fontaine, E., Étienne, S., & Facchinetti, M. L. (2002). Vortex-induced vibrations of risers: theoretical, numerical and experimental investigation. Oil & gas science and technology, 57(1), 59-69. Available
Lerouge, S., Tabrizian, M., Wertheimer, M. R., Marchand, R., & Yahia, L. (2002). Safety of plasma-based sterilization: surface modifications of polymeric medical devices induced by Sterrad and Plazlyte processes. Bio-Medical Materials and Engineering, 12(1), 3-13. External link
Li, L. P., Buschmann, M. D., & Shirazi-Adl, A. (2002). The role of fibril reinforcement in the mechanical behavior of cartilage. In Mechanobiology : Cartilage and Chondrocyte (89-96). Unavailable
Li, L. P., Buschmann, M. D., & Shirazi-Adl, A. (2002). The Role of Fibril Reinforcement in the Mechanical Behavior of Cartilage. Biorheology, 39(1-2), 89-96. External link
Li, L. P., Shirazi-Adl, A., & Buschmann, M. D. (2002). Alterations in mechanical behaviour of articular cartilage due to changes in depth varying material properties : a nonhomogeneous poroelastic model study. Computer Methods in Biomechanics and Biomedical Engineering, 5(1), 45-52. External link
Limodin, N., Verreman, Y., & Tarfa, N. T. (2002, January). Fatigue behavior of a nitrided 1045 steel: competition between two mechanisms [Paper]. Fatigue 2002 EMAS. Unavailable
Liu, X. (2002). Inverse heat conduction problem with a moving boundary [Master's thesis, École Polytechnique de Montréal]. Unavailable
Ma, N., Petit, A., Yahia, L., Huk, O. L., & Tabrizian, M. (2002). Cytotoxic Reaction and Tnf-Alpha Response of Macrophages to Polyurethane Particles. Journal of Biomaterials Science-Polymer Edition, 13(3), 257-272. External link
Mac-Thiong, J. M., Labelle, H., Duong, L., & Aubin, C.-É. (2002). A New Technique for Intraoperative Analysis of Trunk Geometry in Adolescent Idiopathic Scoliosis. Canadian Journal of Surgery, 45(3), 219-223. External link
Mac-Thiong, J. M., Labelle, H., Petit, Y., & Aubin, C.-É. (2002). The Effect of the Relton-Hall Operative Frame on Trunk Deformity in Adolescent Idiopathic Scoliosis. European Spine Journal, 11(6), 556-560. External link
Mac-Thiong, J.-M., Labelle, H., Rooze, M., Feipel, V., & Aubin, C.-É. (2002, May). Use of a transpedicular drill guide for pedicle screw insertion in the thoracic spine [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Manseau, J. (2002). Étude numérique d'un modèle de transport de macromolécules à travers la paroi artérielle [Master's thesis, École Polytechnique de Montréal]. Unavailable
Marchand, L., Derenne, M., & Bouzid, H. (2002). Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads. Welding Research Council Bulletin, 473. Unavailable
Marduel, X. B. (2002). Optimisation à fidélité variable [Master's thesis, École Polytechnique de Montréal]. Available
Marineau, E., Reggio, M., Ozell, B., & Trépanier, J.-Y. (2002, September). A visualistic approach in aerodynamics [Paper]. 14th International Conference on Design Theory and Methodology, Integrated Systems Design, and Engineering Design and Culture, Montréal, Québec. External link
Marleau, G., Hébert, A., & Roy, R. (2002). DRAGON programmer's manual. (Technical Report). Unavailable
Maruzewski, P., Martin, A., Reggio, M., & Trépanier, J.-Y. (2002). Simulation of Arc-Electrode Interaction Using Sheath Modelling in SF₆ Circuit-Breakers. Journal of Physics D: Applied Physics, 35(9), 891-899. External link
Mascle, C. (2002). Feature-based assembly model for integration in computer-aided assembly. Robotics and Computer-Integrated Manufacturing, 18(5-6), 373-378. External link
Mascle, C. (2002, July). System life-cycle model for disassembly-assembly line design [Paper]. 15th World Congress of the International Federation of Automatic Control, Barcelona, Spain. External link
Mascle, C. (2002, January). Thermal blanket for modular micro-satellites [Paper]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Unavailable
Mascle, C., & Chalut, S. (2002). CAO et désassemblage d'un produit. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 79-104. Unavailable
Mehdi, D., Boukas, E.-K., & Liu, Z. K. (2002). Dynamical systems with multiple time-varying delays: Stability and stabilizability. Journal of Optimization Theory and Applications, 113(3), 537-565. External link
Mehdi, D., Boukas, E.-K., & Liu, Z. K. (2002, July). Stability and stabilizability of a class of dynamical uncertain systems with multiple time-varying delays [Paper]. 15th World Congress of the International Federation of Automatic Control, Barcelona, Spain. External link
Messaoud, D. A., Sanschagrin, B., & Derdouri, A. Co-injection molding: effect of processing on material distribution and mechanical properties of short glass fiber-reinforced polypropylene test bars [Paper]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. External link
Mir, Y. A., Mayer, J. R. R., & Fortin, C. (2002). Tool path error prediction of a five-axis machine tool with geometric errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(5), 697-712. External link
Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797. External link
Moglo, K. E. (2002). Analyse non linéaire par éléments finis du genou humain sous charges complexes en flexion [Ph.D. thesis, École Polytechnique de Montréal]. Available
Moisan, S., Véron, P., & Mascle, C. (2002, January). Identification and re-meshing of part interfaces in a polyhedral model of mechanical assembly [Paper]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Unavailable
N'Dri, K. D., Garon, A., & Fortin, A. (2002). Incompressible Navier-Stokes computations with stable and stabilized space-time formulations: A comparative study. Communications in Numerical Methods in Engineering, 18(7), 495-512. External link
Ndiaye, N., Zmeureanu, R., & Bernier, M. (2002, September). Decision support system for the design of office buildings in Senegal [Paper]. Sustainable building 2002, Oslo, Norway. External link
Neis, C. (2002). Modélisation géométrique 3D peropératoire de la colonne vertébrale à l'aide de topographie de surface : étude de faisabilité [Master's thesis, École Polytechnique de Montréal]. Unavailable
Paraschivoiu, I. (2002). Wind turbine design: with emphasis on Darrieus concept. Unavailable
Pazos, V. (2002). Développement d'un système de reconstruction 3D et d'analyse de la surface externe du tronc humain pour un suivi non invasif des déformations scoliotiques [Master's thesis, École Polytechnique de Montréal]. Unavailable
Pazos, V., Cheriet, F., Labelle, H., & Dansereau, J. (2002, May). 3D reconstruction and analysis of the whole trunk surface for non-invasive follow-up of scoliotic deformities [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Pelletier, D. (2002, January). Reliable sensitivity analysis via an adaptative sensitivity equation method [Paper]. AIAA 2002-2758, 3rd AIAA theoritical fluid mechanics meeting, St.Louis, MO. External link
Pelletier, D., & Roache, P. J. (2002, January). CFD code verification and the method of manufactured solution [Paper]. 10th annual conference of the CFD society of Canada. Unavailable
Pelletier, D., Etienne, S., Turgeon, E., & Borggaard, J. (2002, January). Uncertainty analysis for the k-epsilon model of turbulence [Paper]. 10th annual conference of the CFD society of Canada. Unavailable
Pelletier, D., Turgeon, E., & Borggaard, J. (2002, January). Sensitivity and uncertainty analysis of aerodynamics flows [Paper]. ICAS, Toronto, Ontario, Canada. External link
Périé-Curnier, D., Aubin, C.-É., Lacroix, M., Lafon, Y., Dansereau, J., & Labelle, H. (2002, May). Personalized biomechanical modeling of Boston brace treatement in idiopathic scoliosis [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Pettigrew, M. J., & Taylor, C. E. (2002, January). Flow-induced vibration analysis of process equipment: a comprehensive approach [Paper]. CSME forum 2002, Queen's Universitu, Kingston, Ontario, Canada. Unavailable
Pettigrew, M. J., & Taylor, C. E. (2002, January). Vibration analysis of steam generators and heat exchangers: an overview, part 2: vibratio response, fretting-wear, guidelines [Paper]. 5th international symposium on FSI, AE and FIV + N, ASME international mechanical engineering congress and exhibition, New Orleans, Louisiana, USA. External link
Pettigrew, M. J., & Taylor, C. E. (2002, January). Vibration analysis of steam generators and heat exchangers: an overview; part 1: flow, damping, fluidelastic instability [Paper]. 5th international symposium on FSI, AE and FIV + N, ASME International mechanical engineering congress and exhibition, New Orleans, Louisiana, USA. External link
Pettigrew, M. J., & Yetisir, M. (2002, January). Simple energy approach to assess fretting-wear damage [Paper]. 4th CNS international steam generator conference, Toronto, Canada. Unavailable
Pettigrew, M. J., Taylor, C. E., Janzen, V. P., & Whan, T. (2002). Vibration behavior of rotated triangular tube bundles in two-phase cross flows. ASME journal of pressure vessel technology, 124(2), 144-153. External link
Plouznikoff, A., Aubin, C.-É., Ozell, B., & Goussev, V. (2002, October). Simulateur de chirurgie d'instrumentation du rachis scoliotique en réalité virtuelle [Paper]. 32e Réunion annuelle de la scoliose du Québec, Mont St-Hilaire, Québec. Unavailable
Polat, O. (2002). Transfert thermique conjugué dans des cavités allongées ouvertes [Master's thesis, École Polytechnique de Montréal]. Unavailable
Polat, O., & Bilgen, E. (2002). Laminar Natural Convection in Inclined Open Shallow Cavities. International Journal of Thermal Sciences, 41(4), 360-368. External link
Poncet, P., Jaremko, J. L., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002, May). Prediction of spinal deformity in scoliosis from geometric torsion [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Prokoshkin, S. D., Brailovski, V., Turenne, S., Khmelevskaya, Y. I., Korotitskiy, A. V., & Trubitsyna, I. B. (2002, January). Concentration temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys [Paper]. 10th International Conference on Martensitic Transformations (ICOMAT 2002), Espoo, Finlande. Unavailable
Prud'homme, M., & Nguyen, T. H. (2002). Parallel flow stability under a uniform heat flux: effect of the Prandtl number. International Communications in Heat and Mass Transfer, 29(6), 749-756. External link
Prud'homme, M., Bougherara, H., & Bahloul, A. (2002, January). Convective stability of vertical parallel flow in a uniformly heated enclosure [Paper]. IHTC 12, Grenoble. External link
Reggio, M., Hess, A., & Ilinca, A. (2002). 3-D Multiple-Level Simulation of Free Surface Flows. Journal of Hydraulic Research, 40(4), 413-423. External link
Reggio, M., Mckenty, F., Gravel, L., Cortes, J., Morales, G., & Ladron, D. G. M. (2002). Computational analysis of the process for manufacturing seamless tubes. Applied Thermal Engineering, 22(4), 459-470. External link
Ross, A., Ostiguy, G., & Amram, M. (2002, January). Properties of the transient acoustic field of an impacted plate [Paper]. 9th International Congress on Sound and Vibration, Orlando. Florida. Unavailable
Ross, A., Roy, J.-F., & Ostiguy, G. (2002, October). On the mechanical behaviour of vacuum applied surface treatments [Paper]. Semaine canadienne d'acoustique, Charlottetown, P.E.I.. External link
Roy, J.-F., & Ross, A. (2002, July). Observation of the acoustic and flexural waves reflected upon the thickness discontinuity of an impacted plate [Paper]. 9th International Congress on Sound and Vibration, Orlando, Florida. Unavailable
Ryhanen, J., Shabalovskaya, S., & Yahia, L. (2001, September). Bioperformance of Nitinol: in Vivo Biocompatibility [Paper]. Shape memory materials and its applications, Kunming, China. Published in Materials Science Forum, 394-395. External link
Sadeghi, H., Allard, P., Lachance, R., Aissaoui, R., Sadeghi, S., Perrault, R., & Duhaime, M. (2002). Relationship Between Ankle Frontal Muscle Powers and 3-D Gait Patterns. American Journal of Physical Medicine & Rehabilitation, 81(6), 429-436. External link
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2002, October). Gear fault diagnosis using time frequency methods [Diagnostic de défauts d'engrenages par analyse temps-fréquence]. [Paper]. 20th Seminar on Machinery Vibration, Québec, Québec. External link
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2002, October). Rotating machinery fault diagnosis using time-frequency methods [Paper]. 20th Machinery Vibration, Reliability and Maintenance Seminar and Annual General Meeting, Québec, Québec. Unavailable
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2002, June). Time-frequency algorithms and their applications [Paper]. EUROMECH Colloquium 437 : Identification and Updating Methods of Mechanical Structures, Prague, Czech Republic. Unavailable
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2002). Time-frequency distributions and their application to machinery fault detection. International Journal of Condition Monitoring and Diagnosis Engineering Management, 5(2), 41-56. Unavailable
Sayd, M., Baron, L., & Mascle, C. (2002, January). Solution du modèle géométrique direct des manipulateurs parallèles de topologie STAR [Paper]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Unavailable
Shabalovskaya, S., Ryhanen, J., & Yahia, L. (2001, September). Bioperformance of Nitinol: Surface Tendencies [Paper]. Shape memory materials and its applications, Kunming, China. Published in Materials Science Forum. External link
Shirazi-Adl, A., Sadouk, S., Parnianpour, M., Pop, D., & El-Rich, M. (2002). Muscle Force Evaluation and the Role of Posture in Human Lumbar Spine Under Compression. European Spine Journal, 11(6), 519-526. External link
Sinzinkayo, A., Mascle, C., & Balazinski, M. Application of Fuzzy Logic for an Assembly Methodology [Paper]. Integrated Design and Manufacturing in Mechanical Engineering. External link
Soulati, K., & Gauvin, R. (2002, May). Experimental evaluation of composite-concrete interface properties using sandwich specimen [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link
Thomas, M., & Lakis, A. A. (2002, June). Detection of breathing crack by time-frequency analysis [Paper]. 30th International Conference on Computers & Industrial Engineering, Tinos Island, Greece. Unavailable
Thomas, M., Lakis, A. A., Hamidi, L., & Massoud, M. (2002, October). Rotor health monitoring by modal analysis [Paper]. 20th Seminar on Machinery Vibration, Québec, Québec. External link
Toorani, M. H., & Lakis, A. A. (2002, January). Dynamic and stability of anisotropic cylindrical shells conveying axial flow [Paper]. International Congress on Advances in Nuclear Power Plants (ICAPP 2002), Hollywood, FL, USA. Unavailable
Toorani, M. H., & Lakis, A. A. (2002, November). Flow-induced vibration of anisotropic cylindrical shells [Paper]. 5th International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise, part of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana. External link
Toorani, M. H., & Lakis, A. A. (2002). Geometrically non-linear dynamics of anisotropic open cylindrical shells with a refined shell theory. (Technical Report n° EPM-RT-2001-07). Available
Toorani, M. H., & Lakis, A. A. (2002, October). Hybrid finite element in vibrations of composite cylindrical shells [Paper]. 7th Conference of Shell Structures Theory and Applications (SSTA 2002), Warsaw, Poland. Unavailable
Toorani, M. H., & Lakis, A. A. (2002, April). Non-linear fluid-structure interaction in cylindrical shells [Paper]. 10th International Conference on Nuclear Engineering (ICONE 10). External link
Toorani, M. H., & Lakis, A. A. (2002, September). Non-linear vibrations of anisotropic cylindrical shells [Paper]. 6th International Conference on Computational Structures Technology (ICCST 2002), Prague, Czech Republic. Unavailable
Trépanier, J.-Y., Guibault, F., & Ozell, B. (2002, January). The architecture and design of a distributed framework for multidisciplinary analysis [Paper]. 40th AIAA Aerospace Sciences Meeting & Exhibit. External link
Trépanier, J.-Y., Guibault, F., & Ozell, B. (2002, September). A configurable framework for multidisciplinary analysis integration and management [Paper]. 23rd International Congress on Aeronautical Sciences, Toronto, Ont., Canada. External link
Trépanier, J.-Y., Ndiaye, A., Guibault, F., & Leblond, D. (2002, January). Evaluation of the VADOR MDO framework on a flexible wing multidisciplinary analysis problem [Paper]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. External link
Turgeon, E., & Pelletier, D. (2002). Verification and validation in CFD using an adaptive finite-element journal. CASI journal, 48(4), 219-231. External link
Turgeon, E., Pelletier, D., & Borggaard, J. (2002). A General Continuous Sensitivity Equation Formulation for Complex Flows. Numerical Heat Transfer. Part B, Fundamentals, 42(6), 485-498. External link
Turgeon, E., Pelletier, D., & Borggaard, J. (2002, January). Sensitivity and uncertainty analysis for turbulent flows [Paper]. AIAA 2002-0985, 40th AIAA aerospace sciences meeting, Reno, NV. External link
Turgeon, E., Pelletier, D., & Ilinca, F. (2002). Compressible heat transfer computations by an adaptative finite element method. International journal for thermal sciences, 41(8), 721-736. External link
Vangrimde, B., & Boukhili, R. (2002). Analysis of the Bearing Response Test for Polymer Matrix Composite Laminates: Bearing Stiffness Measurement and Simulation. Composite Structures, 56(4), 359-374. External link
Vangrimde, B., & Boukhili, R. (2002, September). Bearing response and macroscopic damage in GRP bolted joints [Paper]. Conference on Fracture of polymers, composites and adhesives (ESIS TC4 2002), Les Diablerets, Switzerland. Unavailable
Vangrimde, B., & Boukhili, R. (2002). Bearing Stiffness of Glass Fibre-Reinforced Polyester: Influence of Coupon Geometry and Laminate Properties. Composite Structures, 58(1), 57-73. External link
Vasilevskiy, D., Simard, J.-M., Bélanger, F., Bernier, F., Turenne, S., & L'Écuyer, J. (2002, January). Texture formation in extruded rods of (BiSb)₂(TeSe)₃ thermoelectric alloys [Paper]. 21st International Conference on Thermoelectrics (ICT 2002), Long Beach, California, USA. External link
Verniest, F., Chopin, D., Godillon-Maquinghen, A. P., Drazetic, P., Aubin, C.-É., & Lepoutre, F. X. (2002, May). Spinal surgery procedure discretization [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Villemure, I., Aubin, C.-É., Dansereau, J., & Labelle, H. (2002). Modélisation biomécanique de la croissance et de la modulation de croissance vertébrales pour l'étude des déformations scoliotiques : étude de faisabilité. ITBM RBM, 23(2), 109-117. External link
Villemure, I., Aubin, C.-É., Dansereau, J., & Labelle, H. (2002). Simulation of Progressive Deformities in Adolescent Idiopathic Scoliosis Using a Biomechanical Model Integrating Vertebral Growth Modulation. Journal of Biomechanical Engineering-Transactions of the Asme, 124(6), 784-790. External link
Villemure, I., Aubin, C.-É., Grimard, G., Dansereau, J., & Labelle, H. (2002, May). Evolution of 3D deformities in adolescents with progressive idiopathic scoliosis [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Villemure, I., Chung, M. A., Seck, C. S., Kimm, M., Matayas, J. R., & Duncan, N. A. (2002, May). The effects of mechanical loading on the mRNA expression of growth plate cells [Paper]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. External link
Yu, J. (2002). New efficient methods for airfoil parameterization and iterative inverse aerodynamic design [Master's thesis, École Polytechnique de Montréal]. Unavailable
