 | Monter d'un niveau |
Achiche, S., Balazinski, M., Baron, L., & Jemielniak, K. (2002). Tool wear monitoring using genetically-generated fuzzy knowledge bases. Engineering Applications of Artificial Intelligence, 15(3-4), 303-314. Lien externe
Aissaoui, R., Arabi, H., Lacoste, M., Zalzal, V., & Dansereau, J. (2002). Biomechanics of Manual Wheelchair Propulsion in Elderly - System Tilt and Back Recline Angles. American Journal of Physical Medicine & Rehabilitation, 81(2), 94-100. Lien externe
Allam, M., & Bazergui, A. (2002). Axial Strength of Tube-to-Tubesheet Joints: Finite Element and Experimental Evaluations. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 22-31. Lien externe
Arghavani, J., Derenne, M., & Marchand, L. (2002). Prediction of gasket leakage rate and sealing performance through fuzzy logic. International Journal of Advanced Manufacturing Technology, 20(8), 612-620. Lien externe
Balazinski, M., Czogala, E., Jemielmak, K., & Leski, J. (2002). Tool condition monitoring using artificial intelligence methods. Engineering Applications of Artificial Intelligence, 15(1), 73-80. Lien externe
Bechet, E., Cuilliere, J. C., & Trochu, F. (2002). Generation of a Finite Element Mesh From Stereolithography (Stl) Files. Computer Aided Design, 34(1), 1-17. Lien externe
Bechet, E., Cuilliere, J.-C., & Trochu, F. (2002). Génération d'un maillage pour éléments finis à partir de fichiers de stéréolithographie (STL) : une interface indépendante des formats CAO : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 9-37. Lien externe
Benea, R., Fortin, C., & Cloutier, G. (2002). Analyse de tolérances en fabrication tenant compte des dispersions de procédés et des erreurs machines-outils : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 39-59. Lien externe
Benhadji, K., Robillard, L., & Vasseur, P. (2002). Convection in a porous cavity saturated with water near 4°C and subject to Dirichlet-Neumann thermal boundary conditions. International Communications in Heat and Mass Transfer, 29(7), 897-906. Lien externe
Bilgen, E. (2002). Natural Convection in Enclosures With Partial Partitions. Renewable Energy, 26(2), 257-270. Lien externe
Bilgen, E., & Richard, M. A. (2002). Horizontal Concrete Slabs as Passive Solar Collectors. Solar Energy, 72(5), 405-413. Lien externe
Birembaut, Y., & Marchand, L. (2002). Characterization of bolted flanged joints subjected to pressure and external bending moments. Welding Research Council Bulletin, 473. Non disponible
Boukas, E.-K., & Benzaouia, A. (2002). Stability of Discrete-Time Linear Systems With Markovian Jumping Parameters and Constrained Control. IEEE Transactions on Automatic Control, 47(3), 516-521. Lien externe
Boukas, E.-K., & Liu, Z. K. (2002). Robust H∞ filtering for polytopic uncertain time-delay systems with Markov jumps. Computers and Electrical Engineering, 28(3), 171-193. Lien externe
Boukas, E.-K., & Liu, Z. K. (2002). Suboptimal regulators for discrete-time jump linear systems with time-multiplied performance index. Journal of Optimization Theory and Applications, 115(1), 49-65. Lien externe
Boukas, E.-K., Liu, Z. K., & Shi, P. (2002). Delay-dependent stability and output feedback stabilisation of Markov jump system with time-delay. IEE Proceedings-Control Theory and Applications, 149(5), 379-386. Lien externe
Boukas, E.-K., Shi, P., Karan, M., & Kaya, C. Y. (2002). Linear discrete-time systems with Markovian jumps and mode dependent time-delay: Stability and stabilizability. Mathematical Problems in Engineering, 8(2), 123-133. Disponible
Bouzid, A. H., & Derenne, M. (2002). Analytical Modeling of the Contact Stress With Nonlinear Gaskets. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 47-53. Lien externe
Bureau, M. N., Perrin, F., Denault, J., & Dickson, J. I. (2002). Interlaminar Fatigue Crack Propagation in Continuous Glass Fiber/Polypropylene Composites. International Journal of Fatigue, 24(2-4), 99-108. Lien externe
Cisse, O., Savadogo, O., Wu, M., & Yahia, L. (2002). Effect of surface treatment of NiTi alloy on its corrosion behavior in Hanks' solution. Journal of Biomedical Materials Research, 61(3), 339-345. Lien externe
Crampon, M. A., Brailovski, V., Sawan, M., & Trochu, F. (2002). Nerve cuff electrode with shape memory alloy armature: design and fabrication. Bio-Medical Materials and Engineering, 12(4), 397-410. Lien externe
Degan, G., & Vasseur, P. (2002). Aiding Mixed Convection Through a Vertical Anisotropic Porous Channel With Oblique Principal Axes. International Journal of Engineering Science, 40(2), 193-209. Lien externe
Degan, G., Zohoun, S., & Vasseur, P. (2002). Forced Convection in Horizontal Porous Channels With Hydrodynamic Anisotropy. International Journal of Heat and Mass Transfer, 45(15), 3181-3188. Lien externe
Delahave, R., Bahloul, A., & Vasseur, P. (2002). Influence of the Soret effect on convection in a binary fluid layer with a free upper surface. International Communications in Heat and Mass Transfer, 29(4), 433-442. Lien externe
Delorme, S., Labelle, H., & Aubin, C.-É. (2002). The Crankshaft Phenomenon : Is Cobb Angle Progression a Good Indicator in Adolescent Idiopathic Scoliosis? Spine, 27(6), E145-E151. Lien externe
Demers, C. N., Tabrizian, M., Petit, A., Hamdy, R. C., & Yahia, L. (2002). Effect of Experimental Parameters on the in Vitro Release Kinetics of Transforming Growth Factor Beta 1 From Coral Particles. Journal of Biomedical Materials Research, 59(3), 403-410. Lien externe
Demers, C., Hamdy, C. R., Corsi, K., Chellat, F., Tabrizian, M., & Yahia, L. (2002). Natural Coral Exoskeleton as a Bone Graft Substitute: a Review. Bio-Medical Materials and Engineering, 12(1), 15-35. Lien externe
Feipel, V., Aubin, C.-É., Ciolofan, O. C., Beausejour, M., Labelle, H., & Mathieu, P. A. (2002). Electromyogram and Kinematic Analysis of Lateral Bending in Idiopathic Scoliosis Patients. Medical & Biological Engineering & Computing, 40(5), 497-505. Lien externe
Fujimoto, S., Bilgen, E., & Ogura, H. (2002). CaO/Ca(OH)₂ chemical heat pump system. Energy Conversion and Management, 43(7), 947-960. Lien externe
Gréalou, L., Aubin, C.-É., & Labelle, H. (2002). Rib cage surgery for the treatment of scoliosis: a biomechanical study of correction mechanisms. Journal of Orthopaedic Research, 20(5), 1121-8. Lien externe
Hagemeister, N., Duval, N., Yahia, L., Krudwig, W., Witzel, U., & De Guise, J. A. (2002). Comparison of Two Methods for Reconstruction of the Posterior Cruciate Ligament Using a Computer Based Method: Quantitative Evaluation of Laxity, Three-Dimensional Kinematics and Ligament Deformation Measurement in Cadaver Knees. KNEE, 9(4), 291-299. Lien externe
Hagemeister, N., Duval, N., Yahia, L., Krudwig, W., Witzel, U., & De Guise, J. A. (2002). Computer-Based Method for the 3-D Kinematic Analysis of Posterior Cruciate Ligament and Postero-Lateral Corner Lesions. KNEE, 9(4), 301-308. Lien externe
Hagemeister, N., Long, R., Yahia, L., Duval, N., Krudwig, W., Witzel, U., & De Guise, J. A. (2002). Quantitative Comparison of Three Different Types of Anterior Cruciate Ligament Reconstruction Methods: Laxity and 3-D Kinematic Measurements. Bio-Medical Materials and Engineering, 12(1), 47-57. Lien externe
Hébert, A., & Coste, M. (2002). Computing moment-based probability tables for self-shielding calculations in lattice codes. Nuclear Science and Engineering, 142(3), 245-257. Lien externe
Hernandez, R., Polizu, S., Turenne, S., & Yahia, L. (2002). Characteristics of Porous Nickel-Titanium Alloys for Medical Applications. Bio-Medical Materials and Engineering, 12(1), 37-45. Lien externe
Jaremko, J. L., Poncet, P., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002). Comparison of Cobb Angles Measured Manually, Calculated from 3-D Spinal Reconstruction, and Estimated from Torso Asymmetry. Computer Methods in Biomechanics and Biomedical Engineering, 5(4), 277-81. Lien externe
Jaremko, J. L., Poncet, P., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002). Genetic Algorithm-Neural Network Estimation of Cobb Angle From Torso Asymmetry in Scoliosis. Journal of Biomechanical Engineering-Transactions of the Asme, 124(5), 496-503. Lien externe
Jaremko, J. L., Poncet, P., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (2002). Indices of Torso Asymmetry Related to Spinal Deformity in Scoliosis. Clinical Biomechanics, 17(8), 559-568. Lien externe
Langlois, M., Masson, C., Kafyeke, F., & Paraschivoiu, I. (2002). Automated Method for Transition Prediction on Wings in Transonic Flows. Journal of Aircraft, 39(3), 460-468. Lien externe
Le Cunff, C., Biolley, F., Fontaine, E., Étienne, S., & Facchinetti, M. L. (2002). Vortex-induced vibrations of risers: theoretical, numerical and experimental investigation. Oil & gas science and technology, 57(1), 59-69. Disponible
Lerouge, S., Tabrizian, M., Wertheimer, M. R., Marchand, R., & Yahia, L. (2002). Safety of plasma‐based sterilization: Surface modifications of polymeric medical devices induced by Sterrad® and Plazlyte™ processes. Bio-Medical Materials and Engineering, 12(1), 3-13. Lien externe
Li, L. P., Shirazi-Adl, A., & Buschmann, M. D. (2002). Alterations in mechanical behaviour of articular cartilage due to changes in depth varying material properties : a nonhomogeneous poroelastic model study. Computer Methods in Biomechanics and Biomedical Engineering, 5(1), 45-52. Lien externe
Ma, N., Petit, A., Yahia, L., Huk, O. L., & Tabrizian, M. (2002). Cytotoxic Reaction and Tnf-Alpha Response of Macrophages to Polyurethane Particles. Journal of Biomaterials Science-Polymer Edition, 13(3), 257-272. Lien externe
Mac-Thiong, J. M., Labelle, H., Duong, L., & Aubin, C.-É. (2002). A New Technique for Intraoperative Analysis of Trunk Geometry in Adolescent Idiopathic Scoliosis. Canadian Journal of Surgery, 45(3), 219-223. Lien externe
Mac-Thiong, J. M., Labelle, H., Petit, Y., & Aubin, C.-É. (2002). The Effect of the Relton-Hall Operative Frame on Trunk Deformity in Adolescent Idiopathic Scoliosis. European Spine Journal, 11(6), 556-560. Lien externe
Marchand, L., Derenne, M., & Bouzid, H. (2002). Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads. Welding Research Council Bulletin, 473. Non disponible
Maruzewski, P., Martin, A., Reggio, M., & Trépanier, J.-Y. (2002). Simulation of Arc-Electrode Interaction Using Sheath Modelling in SF₆ Circuit-Breakers. Journal of Physics D: Applied Physics, 35(9), 891-899. Lien externe
Mascle, C. (2002). Feature-based assembly model for integration in computer-aided assembly. Robotics and Computer-Integrated Manufacturing, 18(5-6), 373-378. Lien externe
Mascle, C., & Chalut, S. (2002). CAO et gammes d'assemblage. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 79-104. Lien externe
Mehdi, D., Boukas, E.-K., & Liu, Z. K. (2002). Dynamical systems with multiple time-varying delays: Stability and stabilizability. Journal of Optimization Theory and Applications, 113(3), 537-565. Lien externe
Mir, Y. A., Mayer, J. R. R., & Fortin, C. (2002). Tool path error prediction of a five-axis machine tool with geometric errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(5), 697-712. Lien externe
Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797. Lien externe
N'Dri, K. D., Garon, A., & Fortin, A. (2002). Incompressible Navier-Stokes computations with stable and stabilized space-time formulations: A comparative study. Communications in Numerical Methods in Engineering, 18(7), 495-512. Lien externe
Pettigrew, M. J., Taylor, C. E., Janzen, V. P., & Whan, T. (2002). Vibration behavior of rotated triangular tube bundles in two-phase cross flows. ASME journal of pressure vessel technology, 124(2), 144-153. Lien externe
Polat, O., & Bilgen, E. (2002). Laminar Natural Convection in Inclined Open Shallow Cavities. International Journal of Thermal Sciences, 41(4), 360-368. Lien externe
Prud'homme, M., & Nguyen, T. H. (2002). Parallel flow stability under a uniform heat flux: effect of the Prandtl number. International Communications in Heat and Mass Transfer, 29(6), 749-756. Lien externe
Reggio, M., Hess, A., & Ilinca, A. (2002). 3-D Multiple-Level Simulation of Free Surface Flows. Journal of Hydraulic Research, 40(4), 413-423. Lien externe
Reggio, M., McKenty, F., Gravel, L., Cortes, J., Morales, G., & Ladron de Guevara, M.-A. (2002). Computational analysis of the process for manufacturing seamless tubes. Applied Thermal Engineering, 22(4), 459-470. Lien externe
Sadeghi, H., Allard, P., Lachance, R., Aissaoui, R., Sadeghi, S., Perrault, R., & Duhaime, M. (2002). Relationship Between Ankle Frontal Muscle Powers and 3-D Gait Patterns. American Journal of Physical Medicine & Rehabilitation, 81(6), 429-436. Lien externe
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2002). Time-frequency distributions and their application to machinery fault detection. International Journal of Condition Monitoring and Diagnosis Engineering Management, 5(2), 41-56. Non disponible
Shirazi-Adl, A., Sadouk, S., Parnianpour, M., Pop, D., & El-Rich, M. (2002). Muscle Force Evaluation and the Role of Posture in Human Lumbar Spine Under Compression. European Spine Journal, 11(6), 519-526. Lien externe
Turgeon, E., & Pelletier, D. (2002). Verification and validation in CFD using an adaptive finite-element journal. CASI journal, 48(4), 219-231. Lien externe
Turgeon, E., Pelletier, D., & Borggaard, J. (2002). A General Continuous Sensitivity Equation Formulation for Complex Flows. Numerical Heat Transfer. Part B, Fundamentals, 42(6), 485-498. Lien externe
Turgeon, E., Pelletier, D., & Ilinca, F. (2002). Compressible heat transfer computations by an adaptative finite element method. International journal for thermal sciences, 41(8), 721-736. Lien externe
Vangrimde, B., & Boukhili, R. (2002). Analysis of the Bearing Response Test for Polymer Matrix Composite Laminates: Bearing Stiffness Measurement and Simulation. Composite Structures, 56(4), 359-374. Lien externe
Vangrimde, B., & Boukhili, R. (2002). Bearing Stiffness of Glass Fibre-Reinforced Polyester: Influence of Coupon Geometry and Laminate Properties. Composite Structures, 58(1), 57-73. Lien externe
Villemure, I., Aubin, C.-É., Dansereau, J., & Labelle, H. (2002). Modélisation biomécanique de la croissance et de la modulation de croissance vertébrales pour l'étude des déformations scoliotiques : étude de faisabilité. ITBM RBM, 23(2), 109-117. Lien externe
Villemure, I., Aubin, C.-É., Dansereau, J., & Labelle, H. (2002). Simulation of Progressive Deformities in Adolescent Idiopathic Scoliosis Using a Biomechanical Model Integrating Vertebral Growth Modulation. Journal of Biomechanical Engineering-Transactions of the Asme, 124(6), 784-790. Lien externe
Gou, M. (2002). Le virage à droite au feu rouge au Québec. (Rapport technique n° P2823). Non disponible
Gou, M., & Bellavigna-Ladoux, O. (2002). Impact des véhicules lourds sur la sécurité aux passages à niveau. (Rapport technique n° P2799). Non disponible
Marleau, G., Hébert, A., & Roy, R. (2002). DRAGON programmer's manual. (Rapport technique). Non disponible
Toorani, M. H., & Lakis, A. A. (2002). Geometrically non-linear dynamics of anisotropic open cylindrical shells with a refined shell theory. (Rapport technique n° EPM-RT-2001-07). Disponible
Allam, M. A., Bazergui, A., Marchand, L., & Derenne, M. (juin 2002). Tube-to-tubesheet joints: maximum tensile stress and contact pressure due to thermal loading and temperature cycling [Communication écrite]. ASME international joint power generation conference-IJPGC 2002, Scottsdale, Arizona, USA. Lien externe
Balazinski, M., & Przybylo, A. (janvier 2002). Animations as support for the teaching of the manufacturing [Communication écrite]. ASEE Annual Conference and Exposition, Montréal, Québec. Lien externe
Balazinski, M., Baron, L., & Achiche, S. (mai 2002). Rule-set optimization in genetically-generated fuzzy knowledge bases [Communication écrite]. Optimization Days 2002, Montréal, Québec. Non disponible
Baron, L., Wang, X., & Cloutier, G. (janvier 2002). Isotropic conditions of parallel manipulators of delta topology [Communication écrite]. Advances in Robot Kinematics: Theory and Applications, Clades de Malavella, Espagne. Lien externe
Bellemare, S. C., Bureau, M. N., Denault, J., & Dickson, J. I. Fatigue resistance of polyamide 6 and polyamide 6/clay nanocomposite [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Bentamy, A., Trépanier, J.-Y., & Guibault, F. (janvier 2002). Wing shape optimization using a constrained NURBS surface geometrical representation [Communication écrite]. 23rd International Congress of Aeronautical Sciences. Lien externe
Benzaouia, A., Boukas, E.-K., & Daraoui, N. (juillet 2002). Stability of continuous-time linear systems with Markovian jumping parameters and constrained control [Communication écrite]. 15th World Congress of the International Federation of Automatic Control, Barcelona, Spain. Lien externe
Bernier, M. (janvier 2002). Uncertainty in the design length calculation for vertical ground heat exchangers [Communication écrite]. 2002 ASHRAE Winter Meeting, Atlantic City, NJ. Lien externe
Borggaard, J., Hétu, J.-F., & Pelletier, D. (janvier 2002). Parametric uncertainty analysis in phase change model [Communication écrite]. AIAA 2002-5601, 9th AIAA/ISSMO symposium on MDAO, Atlanta, Georgia. Lien externe
Borggaard, J., Hétu, J.-F., & Pelletier, D. (janvier 2002). Sensitivity and uncertainty analysis for conjugate phase change problems [Communication écrite]. 10th annual conference on the CFD society of Canada. Non disponible
Borggaard, J., Pelletier, D., & Vugrin, K. (janvier 2002). Sensitivity analysis for problems with numerical noise [Communication écrite]. AIAA 2002-5553, 9th AIAA/ISSMO symposium on MDAO, Atlanta, Georgia. Lien externe
Boudaouara, A., Bouti, A., & Sanschagrin, B. (mai 2002). Optimization of thermal sprue for hot runner molds [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe
Boukas, E.-K., & Communal, A. (décembre 2002). Production and corrective maintenance planning control problem for failure-prone manufacturing systems [Communication écrite]. 41st IEEE Conference on Decision and Control, New Orleans, Louisiana. Lien externe
Boukas, E.-K., & Liu, Z. K. (décembre 2002). Guaranteed cost control for discrete-time Markovian jump linear system with mode-dependent time-delays [Communication écrite]. 41st IEEE Conference on Decision and Control, New Orleans, Louisiana. Lien externe
Bouressace, Z., Souahi, A. H., Yahia, L., & Bourbia, O. (septembre 2001). Study of the Influence of the Parameters Acting on the Thermomechanical Properties of Refractory Bricks [Communication écrite]. 7th Conference and Exhibition of the European Ceramic Society, Brugge, Belgium. Publié dans Key Engineering Materials, 206-213(3). Lien externe
Brown, W., Derenne, M., & Bouzid, A.-H. (août 2002). Determination of Gasket Stress Levels During Thermal Transients [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2002), Vancouver, BC, Canada. Lien externe
Cheriet, F., Remaki, L., Bellefleur, C., Koller, A., Labelle, H., & Dansereau, J. (mai 2002). A new X-ray calibration / reconstruction system for 3D clinical assessment of spinal deformities [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Coma, O., Mascle, C., & Véron, P. (janvier 2002). Feature shape recognition tools dedicated to a design for assembly methodology [Communication écrite]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Non disponible
Daly, H. B., Cole, K. C., Ajji, A., Nguyen, K. T., & Sanschagrin, B. (mai 2002). Molecular orientation in injection-blow-molded bottles [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe
Duke, K., Dansereau, J., Labelle, H., Koller, A., Joncas, J., & Aubin, C.-É. (mai 2002). Study of patient positioning on a dynamic frame for scoliosis surgery [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Elektorowicz, M., Balazinski, M., & Qasaimeh, A. (janvier 2002). Application of the artificial intelligence to estimate the constructed wetland response to heavy metal removal [Communication écrite]. Joint CSCE/ASCE International Conference on Environmental Engineering, Niagara Falls, Ontario. Non disponible
Farinas, M. I., Garon, A., Jullien, S., Carrier, M., & Savard, P. (août 2002). In vivo assessment of lvad work output. [Communication écrite]. 29th Conference of the European Society for Artificial Organs on Bridging to Regeneration, Vienna, Austria. Publié dans International Journal of Artificial Organs, 25(7). Non disponible
Furet, B., Hascoet, J.-Y., & Balazinski, M. (janvier 2002). A Concurrent Engineering Project: Application In Integrated Mechanical Design [Communication écrite]. ASEE Annual Conference and Exposition, Montréal, Québec. Lien externe
Garon, A., & Manseau, J. (août 2002). A numerical study of albumin transport through normal and damaged endothelium [Communication écrite]. 29th Conference of the European Society for Artificial Organs on Bridging to Regeneration, Vienna, Austria. Publié dans International Journal of Artificial Organs, 25(7). Non disponible
Guibault, F., Bentamy, A., & Trépanier, J.-Y. (janvier 2002). Constraints specifications on nurbs surfaces for wing geometric representation [Communication écrite]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta. Lien externe
Guibault, F., Camarero, R., & Vu, T. C. (janvier 2002). Issues in hydraulic design automation [Communication écrite]. Hydro 2002, Turquie. Non disponible
Guo, H., & Verreman, Y. (janvier 2002). Evaluation of multiaxial fatigue parameters for predicting axial-torsional high cycle fatigue life of ferritic-pearlitic steels [Communication écrite]. Fatigue 2002 EMAS. Non disponible
Havugimana, P. C., Lutz, C., Saeed, F., Paraschivoiu, I., Kerevanian, G.-K., Sidorenko, A., Benard, E., Cooper, R. K., & Raghunathan, R. S. (juin 2002). A comparison of skin friction and heat transfer prediction by various roughness models [Communication écrite]. 20th AIAA Applied Aerodynamics Conference, St. Louis, MO. Lien externe
Hébert, A. (juin 2002). Scripting Dragon [Communication écrite]. 23th Annual CNS Conference (CSN 2002), Toronto, ON. Non disponible
Janzen, V. P., Hagberg, E. G., Patrick, J. F., Pettigrew, M. J., Taylor, C. E., & Whan, T. G. (novembre 2002). Vibration and work-rate measurements of steam generator u-tubes in air-water cross-flow [Communication écrite]. 5th international symposium on FSI, AE and FIV + N, ASME international mechanical engineering congress and exhibition, New Orleans, Louisiana, USA. Lien externe
Koutchouk, M., Gou, M., Benoit, R., Olteanu, M., & Aubin, C.-É. (juin 2002). Modeling of safety systems to improve driver's safety during lift truck lateral tip overs [Communication écrite]. SAE International Conference and Exposition of Digital Human Modeling for Design and Engineering, Munich, Allemagne. Non disponible
Labbé, P., Guibault, F., Dompierre, J., Tribes, C., Vallet, M.-G., & Trépanier, J.-Y. (janvier 2002). Pirate - Towards a STEP compliant MDO environnement [Communication écrite]. 40th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, USA. Lien externe
Lacasse, D., Pelletier, D., & Garon, A. (janvier 2002). Adaptative finite element model for hemolysis prediction [Communication écrite]. 10th annual conference of the CFD society of Canada. Non disponible
Lachance, D., Bernier, M., Castaing-Lasvignottes, J., & Meunier, F. Simulation dynamique d'une machine à adsorption : application à un cycle cascade bi-étage [Communication écrite]. e-Sim 2002 : the Canadian conference on building energy simulation. Non disponible
Li, L. P., Buschmann, M. D., & Shirazi-Adl, A. (avril 2001). The Role of Fibril Reinforcement in the Mechanical Behavior of Cartilage [Communication écrite]. 2nd International Symposium on Mechanobiology: Cartilage and Chondrocyte, Paris, France. Publié dans Biorheology, 39(1-2). Lien externe
Limodin, N., Verreman, Y., & Tarfa, N. T. (janvier 2002). Fatigue behavior of a nitrided 1045 steel: competition between two mechanisms [Communication écrite]. Fatigue 2002 EMAS. Non disponible
Mac-Thiong, J.-M., Labelle, H., Rooze, M., Feipel, V., & Aubin, C.-É. (mai 2002). Use of a transpedicular drill guide for pedicle screw insertion in the thoracic spine [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Marineau, E., Reggio, M., Ozell, B., & Trépanier, J.-Y. (septembre 2002). A visualistic approach in aerodynamics [Communication écrite]. 14th International Conference on Design Theory and Methodology, Integrated Systems Design, and Engineering Design and Culture, Montréal, Québec. Lien externe
Mascle, C. (juillet 2002). System life-cycle model for disassembly-assembly line design [Communication écrite]. 15th World Congress of the International Federation of Automatic Control, Barcelona, Spain. Lien externe
Mascle, C. (janvier 2002). Thermal blanket for modular micro-satellites [Communication écrite]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Non disponible
Mehdi, D., Boukas, E.-K., & Liu, Z. K. (juillet 2002). Stability and stabilizability of a class of dynamical uncertain systems with multiple time-varying delays [Communication écrite]. 15th World Congress of the International Federation of Automatic Control, Barcelona, Spain. Lien externe
Messaoud, D. A., Sanschagrin, B., & Derdouri, A. Co-injection molding: effect of processing on material distribution and mechanical properties of short glass fiber-reinforced polypropylene test bars [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Moisan, S., Véron, P., & Mascle, C. (janvier 2002). Identification and re-meshing of part interfaces in a polyhedral model of mechanical assembly [Communication écrite]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Non disponible
Ndiaye, D., Zmeureanu, R., & Bernier, M. (septembre 2002). Decision support system for the design of office buildings in Senegal [Communication écrite]. Sustainable building 2002, Oslo, Norway. Lien externe
Pazos, V., Cheriet, F., Labelle, H., & Dansereau, J. (mai 2002). 3D reconstruction and analysis of the whole trunk surface for non-invasive follow-up of scoliotic deformities [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Pelletier, D. (juin 2002). Reliable sensitivity analysis via an adaptative sensitivity equation method [Communication écrite]. AIAA 2002-2758, 3rd AIAA theoretical fluid mechanics meeting, St. Louis, MO. Lien externe
Pelletier, D., & Roache, P. J. (janvier 2002). CFD code verification and the method of manufactured solution [Communication écrite]. 10th annual conference of the CFD society of Canada. Non disponible
Pelletier, D., Etienne, S., Turgeon, E., & Borggaard, J. (janvier 2002). Uncertainty analysis for the k-epsilon model of turbulence [Communication écrite]. 10th annual conference of the CFD society of Canada. Non disponible
Pelletier, D., Turgeon, E., & Borggaard, J. (janvier 2002). Sensitivity and uncertainty analysis of aerodynamics flows [Communication écrite]. ICAS, Toronto, Ontario, Canada. Lien externe
Périé-Curnier, D., Aubin, C.-É., Lacroix, M., Lafon, Y., Dansereau, J., & Labelle, H. (mai 2002). Personalized biomechanical modeling of Boston brace treatement in idiopathic scoliosis [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Pettigrew, M. J., & Taylor, C. E. (janvier 2002). Flow-induced vibration analysis of process equipment: a comprehensive approach [Communication écrite]. CSME forum 2002, Queen's Universitu, Kingston, Ontario, Canada. Non disponible
Pettigrew, M. J., & Taylor, C. E. (novembre 2002). Vibration Analysis of Steam Generators and Heat Exchangers: An Overview — Part II: Vibration, Response, Fretting-Wear, Guidelines [Communication écrite]. 5th international symposium on FSI, AE and FIV + N, ASME international mechanical engineering congress and exhibition, New Orleans, Louisiana, USA (12 pages). Lien externe
Pettigrew, M. J., & Taylor, C. E. (janvier 2002). Vibration analysis of steam generators and heat exchangers: an overview; part 1: flow, damping, fluidelastic instability [Communication écrite]. 5th international symposium on FSI, AE and FIV + N, ASME International mechanical engineering congress and exhibition, New Orleans, Louisiana, USA. Lien externe
Pettigrew, M. J., & Yetisir, M. (janvier 2002). Simple energy approach to assess fretting-wear damage [Communication écrite]. 4th CNS international steam generator conference, Toronto, Canada. Non disponible
Plouznikoff, A., Aubin, C.-É., Ozell, B., & Goussev, V. (octobre 2002). Simulateur de chirurgie d'instrumentation du rachis scoliotique en réalité virtuelle [Communication écrite]. 32e Réunion annuelle de la scoliose du Québec, Mont St-Hilaire, Québec. Non disponible
Poncet, P., Jaremko, J. L., Ronsky, J., Harder, J., Dansereau, J., Labelle, H., & Zernicke, R. F. (mai 2002). Prediction of spinal deformity in scoliosis from geometric torsion [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Prokoshkin, S. D., Brailovski, V., Turenne, S., Khmelevskaya, I. Y., Korotitskiy, A. V., & Trubitsyna, I. B. (juin 2002). Concentration temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys [Communication écrite]. 10th International Conference on Martensitic Transformations (ICOMAT 2002), Espoo, Finlande. Publié dans Journal de physique. IV, 112. Lien externe
Prud'homme, M., Bougherara, H., & Bahloul, A. (août 2002). Convective stability of vertical parallel flow in a uniformly heated enclosure [Communication écrite]. IHTC 12, Grenoble. Lien externe
Ross, A., Ostiguy, G., & Amram, M. (janvier 2002). Properties of the transient acoustic field of an impacted plate [Communication écrite]. 9th International Congress on Sound and Vibration, Orlando. Florida. Non disponible
Ross, A., Roy, J.-F., & Ostiguy, G. (octobre 2002). On the mechanical behaviour of vacuum applied surface treatments [Communication écrite]. Semaine canadienne d'acoustique, Charlottetown, P.E.I.. Lien externe
Roy, J.-F., & Ross, A. (juillet 2002). Observation of the acoustic and flexural waves reflected upon the thickness discontinuity of an impacted plate [Communication écrite]. 9th International Congress on Sound and Vibration, Orlando, Florida. Non disponible
Ryhanen, J., Shabalovskaya, S., & Yahia, L. (septembre 2001). Bioperformance of Nitinol: in Vivo Biocompatibility [Communication écrite]. Shape memory materials and its applications, Kunming, China. Publié dans Materials Science Forum, 394-395. Lien externe
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (octobre 2002). Gear fault diagnosis using time frequency methods [Diagnostic de défauts d'engrenages par analyse temps-fréquence]. [Communication écrite]. 20th Seminar on Machinery Vibration, Québec, Québec. Lien externe
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (octobre 2002). Rotating machinery fault diagnosis using time-frequency methods [Communication écrite]. 20th Machinery Vibration, Reliability and Maintenance Seminar and Annual General Meeting, Québec, Québec. Non disponible
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (juin 2002). Time-frequency algorithms and their applications [Communication écrite]. EUROMECH Colloquium 437 : Identification and Updating Methods of Mechanical Structures, Prague, Czech Republic. Non disponible
Sayd, M., Baron, L., & Mascle, C. (janvier 2002). Solution du modèle géométrique direct des manipulateurs parallèles de topologie STAR [Communication écrite]. 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France. Non disponible
Shabalovskaya, S., Ryhanen, J., & Yahia, L. (septembre 2001). Bioperformance of Nitinol: Surface Tendencies [Communication écrite]. Shape memory materials and its applications, Kunming, China. Publié dans Materials Science Forum, 394-395. Lien externe
Sinzinkayo, A., Mascle, C., & Balazinski, M. Application of Fuzzy Logic for an Assembly Methodology [Communication écrite]. Integrated Design and Manufacturing in Mechanical Engineering. Lien externe
Soulati, K., & Gauvin, R. (mai 2002). Experimental evaluation of composite-concrete interface properties using sandwich specimen [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe
Thomas, M., & Lakis, A. A. (juin 2002). Detection of breathing crack by time-frequency analysis [Communication écrite]. 30th International Conference on Computers & Industrial Engineering, Tinos Island, Greece. Non disponible
Thomas, M., Lakis, A. A., Hamidi, L., & Massoud, M. (octobre 2002). Rotor health monitoring by modal analysis [Surveillance des fissures de rotors par analyse modale]. [Communication écrite]. 20th Seminar on Machinery Vibration, Québec, Québec. Non disponible
Toorani, M. H., & Lakis, A. A. (janvier 2002). Dynamic and stability of anisotropic cylindrical shells conveying axial flow [Communication écrite]. International Congress on Advances in Nuclear Power Plants (ICAPP 2002), Hollywood, FL, USA. Non disponible
Toorani, M. H., & Lakis, A. A. (novembre 2002). Flow-induced vibration of anisotropic cylindrical shells [Communication écrite]. 5th International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise, part of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana. Lien externe
Toorani, M. H., & Lakis, A. A. (octobre 2002). Hybrid finite element in vibrations of composite cylindrical shells [Communication écrite]. 7th Conference of Shell Structures Theory and Applications (SSTA 2002), Warsaw, Poland. Non disponible
Toorani, M. H., & Lakis, A. A. (avril 2002). Non-linear fluid-structure interaction in cylindrical shells [Communication écrite]. 10th International Conference on Nuclear Engineering (ICONE 10). Lien externe
Toorani, M. H., & Lakis, A. A. (septembre 2002). Non-linear vibrations of anisotropic cylindrical shells [Communication écrite]. 6th International Conference on Computational Structures Technology (ICCST 2002), Prague, Czech Republic. Non disponible
Trépanier, J.-Y., Guibault, F., & Ozell, B. (janvier 2002). The architecture and design of a distributed framework for multidisciplinary analysis [Communication écrite]. 40th AIAA Aerospace Sciences Meeting & Exhibit. Lien externe
Trépanier, J.-Y., Guibault, F., & Ozell, B. (septembre 2002). A configurable framework for multidisciplinary analysis integration and management [Communication écrite]. 23rd International Congress on Aeronautical Sciences, Toronto, Ont., Canada. Lien externe
Trépanier, J.-Y., Ndiaye, A., Guibault, F., & Leblond, D. (septembre 2002). Evaluation of the VADOR MDO framework on a flexible wing multidisciplinary analysis problem [Communication écrite]. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Lien externe
Turgeon, E., Pelletier, D., & Borggaard, J. (janvier 2002). Sensitivity and uncertainty analysis for turbulent flows [Communication écrite]. AIAA 2002-0985, 40th AIAA aerospace sciences meeting, Reno, NV. Lien externe
Vangrimde, B., & Boukhili, R. (septembre 2002). Bearing response and macroscopic damage in GRP bolted joints [Communication écrite]. Conference on Fracture of polymers, composites and adhesives (ESIS TC4 2002), Les Diablerets, Switzerland. Non disponible
Vasilevskiy, D., Simard, J.-M., Bélanger, F., Bernier, F., Turenne, S., & L'Écuyer, J. (janvier 2002). Texture formation in extruded rods of (BiSb)₂(TeSe)₃ thermoelectric alloys [Communication écrite]. 21st International Conference on Thermoelectrics (ICT 2002), Long Beach, California, USA. Lien externe
Verniest, F., Chopin, D., Godillon-Maquinghen, A. P., Drazetic, P., Aubin, C.-É., & Lepoutre, F. X. (mai 2002). Spinal surgery procedure discretization [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Villemure, I., Aubin, C.-É., Grimard, G., Dansereau, J., & Labelle, H. (mai 2002). Evolution of 3D deformities in adolescents with progressive idiopathic scoliosis [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Villemure, I., Chung, M. A., Seck, C. S., Kimm, M., Matayas, J. R., & Duncan, N. A. (mai 2002). The effects of mechanical loading on the mRNA expression of growth plate cells [Communication écrite]. 4th Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2002), Athens, Greece. Lien externe
Assandé, K. K. E. (2002). Mise en œuvre d'une méthode automatisée et interactive de modification de réseaux d'échangeurs de chaleur [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Balasoiu, B. A. (2002). Nouvelle méthode de désassemblage virtuel pour la génération de gammes [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Balasoiu, B. A. (2002). Nouvelle méthode de désassemblage virtuel pour la génération de gammes [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bolduc, D. (2002). Évaluation des performances d'une roue de ventilateur centrifuge [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Bougherara, H. (2002). Étude de la stabilité d'un écoulement parallèle dans une cavité verticale soumise à des flux de chaleur uniformes [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Boukehili, H. (2002). Effet des charges et des additifs sur les propriétés physiques et mécaniques des composites pultrudés [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Boutana, M. N. (2002). Convection naturelle dans un milieu poreux soumis à l'effet Soret [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Clément, É. (2002). Étude de l'influence de la concentration de contraintes sur le comportement thermomécanique des alliages à mémoire de forme [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Communal, A. (2002). Ligne de transfert : contrôle de production et de maintenance [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Gougam, M. M. (2002). Influence de la vitesse sur le risque d'être impliqué dans une collision grave ou mortelle en milieu urbain [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Gouttebroze, S. (2002). Amélioration du code CANICE par des méthodes d'approximation et validation [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Liu, X. (2002). Inverse heat conduction problem with a moving boundary [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Manseau, J. (2002). Étude numérique d'un modèle de transport de macromolécules à travers la paroi artérielle [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Marduel, X. B. (2002). Optimisation à fidélité variable [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Neis, C. (2002). Modélisation géométrique 3D peropératoire de la colonne vertébrale à l'aide de topographie de surface : étude de faisabilité [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Pazos, V. (2002). Développement d'un système de reconstruction 3D et d'analyse de la surface externe du tronc humain pour un suivi non invasif des déformations scoliotiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Polat, O. (2002). Transfert thermique conjugué dans des cavités allongées ouvertes [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Yu, J. (2002). New efficient methods for airfoil parameterization and iterative inverse aerodynamic design [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Béchet, É. (2002). Résolution d'un problème aux limites à frontière libre au moyen d'un algorithme de remaillage adaptatif et anisotrope [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Farinas, M.-I. (2002). Méthodologie de design de turbomachines de petite taille appliquée au développement d'une pompe d'assistance cardiaque [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Moglo, K. E. (2002). Analyse non linéaire par éléments finis du genou humain sous charges complexes en flexion [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Brailovski, V., Terriault, P., & Trochu, F. (2002). Thermal snap switch. (Demande de brevet no CA2314955). Lien externe
Bazergui, A., Biron, A., Bui-Quoc, T., Laberge, C., & McIntyre, G. (2002). Résistance des matériaux. (3e éd.). Lien externe
Boukas, E.-K., & Liu, Z.-K. (2002). Deterministic and Stochastic Time-Delay Systems. Lien externe
Chedmail, P., Cognet, G., Fortin, C., Mascle, C., & Pegna, J. (2002). Integrated design and manufacturing in mechanical engineering. (1ère éd.). Lien externe
Paraschivoiu, I. (2002). Wind turbine design: with emphasis on Darrieus concept. Lien externe
Li, L. P., Buschmann, M. D., & Shirazi-Adl, A. (2002). The role of fibril reinforcement in the mechanical behavior of cartilage. Dans Stoltz, J. F. (édit.), Mechanobiology : Cartilage and Chondrocyte (Vol. 2, p. 89-96). Non disponible
