 | Monter d'un niveau |
Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. (2005). Numerical simulation of flow, temperature and composition variations in a galvanizing bath. Canadian Metallurgical Quarterly, 44(3), 369-378. Lien externe
Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (mai 2005). Numerical simulation of the rate of dross formation in continuous galvanizing baths [Communication écrite]. AISTech 2005, Iron & Steel Technology Conference, Charlotte, NC, USA. Lien externe
Akrour, F. (2005). Méthode statistique d'analyse et de prédiction des casses de la feuille dans une machine à papier [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Alonso, M., Lorences, M. J., Patience, G. S., Vega, A. B., Diez, F. V., & Dahl, S. (2005). Membrane Pilot Reactor Applied to Selective Oxidation Reactions. Catalysis Today, 104(2-4), 177-184. Lien externe
Alonso, M., Patience, G. S., Fernandez, J. R., Lorences, M. J., Diez, F., Vega, A., & Cenni, R. (septembre 2005). Pilot scale heat transfer in an inorganic membrane reactor [Communication écrite]. 7th International Conference on Catalysis in membrane reactors, Italy. Non disponible
Anctil, P.-A. (2005). Étude expérimentale et thermochimique de la corrosion des bétons réfractaires aluminosiliceux par les alliages d'aluminium contenant les espèces volatiles zinc et magnésium [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Andreux, R., Gauthier, T., Chaouki, J., & Simonin, O. (2005). New Description of Fluidization Regimes. AICHE Journal, 51(4), 1125-1130. Lien externe
Arzate, A., & Tanguy, P. A. (2005). Hydrodynamics of liquid jet application in high-speed jet coating: Newtonian and shear-thinning fluids. Chemical Engineering Research & Design, 83(2 A), 111-125. Lien externe
Arzate, A., & Tanguy, P. A. (2005). Wetting contact line modeling in high-speed jet coating. Nordic Pulp & Paper Research Journal, 20(2), 217-226. Lien externe
Ascanio, G., & Tanguy, P. A. (2005). Mixing of shear-thinning fluids with dual off-centred impellers. Canadian Journal of Chemical Engineering, 83(3), 393-400. Lien externe
Ascanio, G., Carreau, P., Reglat, O., & Tanguy, P. A. (2005). Extensional Rheology of Coating Suspensions in Relation With Misting in Film Coaters. Nordic Pulp & Paper Research Journal, 20(1), 48-53. Lien externe
Ascanio, G., Foucault, S., Heniche, M., Rivera, C., & Tanguy, P. A. (2005). Chaotic mixing in stirred vessels : a new strategy to enhance homogeneity. Ingenieria mecanica - Tecnologia y Desarollo, 1, 209-214. Lien externe
Bailon, J.-P., Clément, B., & Lafleur, P. (juin 2005). Same course, two methods of learning: Assessment of the student's success [Communication écrite]. ASEE Annual Conference and Exposition, Pittsburgh, PA, United states. Lien externe
Bellec, S., Jiang, T., Kerr, B., Diamond, M., & Stuart, P. R. (février 2005). On-line processing and steady state reconciliation of pulp and paper mill process data [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Bertrand, F., Leclaire, L. A., & Levecque, G. (2005). DEM-Based Models for the Mixing of Granular Materials. Chemical Engineering Science, 60(8-9), 2517-2531. Lien externe
Bhadane, P. (2005). Morphology of ethylene-propylene-diene terpolymer/polypropylene (EPDM/PP) blends and their thermoplastic vulcanizates [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bhadane, P., Favis, B. D., Huneault, M. A., Champagne, M., & Tofan, F. (mai 2005). Erosion and continuity development in high viscosity ratio epdm/pp blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Billotte, C. (2005). Caractérisation en rhéologie d'une pâte à souder électronique pour une application en sérigraphie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Binette, J.-S., Laflamme, F., Valverde-Franco, G., Henderson, J. E., & Buschmann, M. D. (juillet 2005). Novel biomechanical indentation test demonstrates joint surface weakening in mice lacking fibroblast growth factor receptor 3 (FGFR3) [Communication écrite]. Transactions 11th Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Blanc, A., Tran-Khanh, N., Filion, D., & Buschmann, M. D. (2005). Optimal Processing Method to Obtain Four-Color Confocal Fluorescent Images of the Cytoskeleton and Nucleus in Three-Dimensional Chondrocyte Cultures. Journal of Histochemistry & Cytochemistry, 53(9), 1171-1175. Lien externe
Bouffard, J., Kaster, M., & Dumont, H. (2005). Influence of Process Variable and Physicochemical Properties on the Granulation Mechanism of Mannitol in a Fluid Bed Top Spray Granulator. Drug Development and Industrial Pharmacy, 31(9), 923-933. Lien externe
Brousseau, P., & Dubois, C. (2005). Polymer-Coated Ultra-Fine Particles. MRS Proceedings, 896. Lien externe
Brown, D., Marechal, F., & Paris, J. (2005). A Dual Representation for Targeting Process Retrofit, Application to a Pulp and Paper Process. Applied Thermal Engineering, 25(7), 1067-1082. Lien externe
Brown, D., Maréchal, F., Heyen, G., & Paris, J. (mai 2005). Application of multi-objective optimisation to process measurement system design [Communication écrite]. European Symposium on Computer-Aided Process Engineering (ESCAPE 15), Barcelona, Spain. Publié dans Computer Aided Chemical Engineering, 20. Lien externe
Brown, D., Maréchal, F., Heyen, G., & Paris, J. Application of multi-objective optimisation to process measurements system design [Communication écrite]. ESCAPE 15, Barcelona. Non disponible
Cadotte, M. (2005). Étude des impacts environnementaux primaires et secondaires lors de la remédiation des sols contaminés en utilisant une analyse de cycle de vie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Cadotte, M., Tellier, M.-È., Blanco, A., Van De Ven, T., & Paris, J. (février 2005). Effects of various retention AIDS on fiber flocculation, filler RETENTION and drainage [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Chevrier, A., Hoemann, C. D., Sun, J., & Buschmann, M. D. (mars 2005). In situ solidifying chitosan-GP/blood implants promote intramembranous bone formation in microdrilled chondral defects of adult rabbits [Communication écrite]. Transactions of the Orthopedic Research Society, Washington, DC, USA. Non disponible
Chevrier, A., Hoemann, C. D., Sun, J., & Buschmann, M. D. (juillet 2005). In situ solidifying chitosan-GP/blood implants promote subchondral vascularization and intramembranous bone formation in microdrilled chondral defects of adult rabbits [Communication écrite]. Transactions 11th Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Chevrier, A., Hoemann, C. D., Sun, J., & Buschmann, M. D. (mars 2005). Residency and Clearance of In Situ Solidifying Chitosan-GP/Blood Implants in Microdrilled Chondral Defects in Adult Rabbits [Communication écrite]. Transactions of the Orthopedic Research Society, Washington, DC, USA. Non disponible
Chevrier, A., Rossomacha, E., Buschmann, M. D., & Hoemann, C. D. (2005). Optimization of Histoprocessing Methods to Detect Glycosaminoglycan, Collagen Type II, and Collagen Type I in Decalcified Rabbit Osteochondral Sections. Journal of Histotechnology, 28(3), 165-175. Lien externe
Cho, J. (2005). Sol and gel behavior of chitosan-glycerophosphate systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Cho, J., Heuzey, M.-C., Begin, A., & Carreau, P. (2005). Physical gelation of chitosan in the presence of β-glycerophosphate: The effect of temperature. Biomacromolecules, 6(6), 3267-3275. Lien externe
Cho, J., Heuzey, M.-C., Bégin, A., & Carreau, P. (mai 2023). Rheology of heat-induced gelation of chitosan solutions [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston. Lien externe
Cornejo Rojas, F. A. (2005). Using life cycle assessment (LCA) as a tool to enhance environmental impact assessment (EIA) with a case study application in the pulp and paper industry [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Cornejo, F., Janssen, M. J. M., Gaudreault, C., Samson, R., & Stuart, P. R. (mai 2005). Using life cycle assessment (LCA) as a tool to enhance environmental impact assessments (EIA) [Communication écrite]. 8th Conference on Process Integration Modeling and Optimization for Energy Saving and Pollution Reduction (PRES 2005), Giardini Naxos, Italy. Publié dans Chemical Engineering Transactions, 7. Non disponible
Costa, A., Paris, J., Towers, M., & Browne, T. Economics of Trigeneration in a Pulp Mill for Enhanced Energy Efficiency and Reduced Ghg Emissions [Communication écrite]. Proceedings of Ecos 2005, Vols 1-3 - Shaping Our Future Energy Systems. Non disponible
Coursol, P., Pelton, A., Chartrand, P., & Zamalloa, M. (2005). The Ca(SO₄)-Na-2(SO₄)-Ca-3(AsO₄)₍₂₎-Na-3(AsO₄) Phase Diagram. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 36(6), 825-836. Lien externe
Coursol, P., Pelton, A., Chartrand, P., & Zamalloa, M. (2005). The CaSO₄-CaO-Ca₃(AsO₄)₂ phase diagram. Canadian Metallurgical Quarterly, 44(4), 547-553. Lien externe
Coursol, P., Pelton, A., Chartrand, P., & Zamalloa, M. (2005). The CaSO₄-Na₂SO₄-CaO phase diagram. Canadian Metallurgical Quarterly, 44(4), 537-545. Lien externe
Dabros, M., Perrier, M., Forbes, F., Fairbank, M., & Stuart, P. R. (2005). Model-Based Direct Search Optimization of the Broke Recirculation System in a Newsprint Mill. Journal of Cleaner Production, 13(15), 1416-1423. Lien externe
Davidson, D., Blanc, A., Filion, D., Wang, H., Plut, P., Pfeffer, G., Buschmann, M. D., & Henderson, J. E. (juillet 2005). FGF18 signals through FGFR3 to promote chondrogenesis [Communication écrite]. Transactions 11th Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Davidson, D., Blanc, A., Filion, D., Wang, H., Plut, P., Pfeffer, G., Buschmann, M. D., & Henderson, J. E. (2005). Fibroblast growth factor (FGF) 18 signals through FGF receptor 3 to promote chondrogenesis. Journal of Biological Chemistry, 280(21), 20509-20515. Disponible
Del Bianco, T. G. (2005). Adaptive model predictive control of a two-phase chemical reactor [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Desaulniers, E., Bertrand, F., Leclaire, L.-A., & Vidal, D. (juin 2005). Numerical modeling of granular flow with the discrete element method : application to pigment consolidation in paper coating process [Communication écrite]. 4th International Conference on CFD in the Oil, Gas, Metallurgical and Process Industries, Trondheim, Norway. Non disponible
Deschenes, J. S., Desbiens, A., Perrier, M., & Kamen, A. (2005). On Simultaneous Control of Biomass and Metabolite Concentration in Perfusion Bioreactors. Dynamics of Continuous Discrete and Impulsive Systems-Series B-Applications & Algorithms, 2, 663-667. Non disponible
Devals, C., Heniche, M., Bertrand, F., Hayes, R. E., & Tanguy, P. A. (2005). A finite element strategy for the solution of interface tracking problems. International Journal for Numerical Methods in Fluids, 49(12), 1305-1327. Lien externe
Doucet, J., Bertrand, F., & Chaouki, J. (janvier 2005). An extended radioactive particle tracking method for systems with irregular moving boundaries [Communication écrite]. 55th CSChE Annual Conference, Toronto, ON, Canada. Non disponible
Doucet, J., Chaouki, J., & Bertrand, F. (janvier 2005). An extended radioactive particle tracking method for mapping the solid flow fields in domains with moving boundaries [Communication écrite]. 2005 Particulate Processes in the Pharmaceutical Industry, Montréal, Qc, Canada. Non disponible
Doucet, L., Ascanio, G., & Tanguy, P. A. (2005). Hydrodynamics Characterization of Rotor-Stator Mixer With Viscous Fluids. Chemical Engineering Research & Design, 83(A10), 1186-1195. Lien externe
Dufaure, N., Carreau, P., Heuzey, M.-C., & Michel, A. (2005). Phase Inversion in Immiscible Blends of Pe and Reactive Eva. Journal of Polymer Engineering, 25(3), 187-216. Lien externe
Fang, Y., Carreau, P., & Lafleur, P. (2005). Thermal and rheological properties of MLLDPE/LDPE blends. Polymer Engineering and Science, 45(9), 1254-1264. Lien externe
Fang, Y., Carreau, P., Lafleur, P., & Ymmel, S. (2005). Properties of MLLDPE/LDPE blends in film blowing. Polymer Engineering and Science, 45(3), 343-353. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (2005). Correlation between structural parameters and property of PE blown films. Journal of Plastic Film & Sheeting, 21(4), 281-305. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (mai 2005). Structure-property correlations for pe blown films [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Favis, B. D., Rodriguez, F., & Ramsay, B. A. (2005). Method of making polymer compositions containing thermoplastic starch. (Brevet no US6844380). Lien externe
Ferretti, A. (2005). Rheological and mechanical properties of PEO/BLOCK copolymer blends [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ferretti, A., Carreau, P., & Gerard, P. (2005). Rheological and mechanical properties of PEO/block copolymer blends. Polymer Engineering and Science, 45(10), 1385-1394. Lien externe
Foucault, S., Ascanio, G., & Tanguy, P. A. (2005). Power characteristics in coaxial mixing: Newtonian and non-newtonian fluids. Industrial and Engineering Chemistry Research, 44(14), 5036-5043. Lien externe
Foutlane, O. (2005). Utilisation de l'approche stochastique pour la simulation des polymérisations par ouverture de cycle, cas des polylactides [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Frei, K. M., Cameron, D., Jasmin, S., & Stuart, P. R. (février 2005). Novel sludge drying process for cost-effective onsite sludge management [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Gaboune, Y. (2005). Développement d'un tomographe pour la visualisation des écoulements polyphasiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gagnon, I. (2005). Étude du potentiel d'atténuation naturelle des cyanures dans l'eau souterraine à proximité d'un site d'enfouissement de brasques usées [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gamache, E., Agassant, J. F., Demay, Y., & Lafleur, P. (2005). Evaluation of stresses in a two-layer co-extruded LDPE melt blown film. Journal of Plastic Film & Sheeting, 21(2), 127-144. Lien externe
Gang, L., Sarazin, P., Zhenhua, Y., & Favis, B. D. (mai 2005). Morphology and rheology of polycaprolactone/thermoplastic starch blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Garnett, D. I., & Patience, G. S. (juillet 2005). From scale-up to experience curves [Communication écrite]. World Chemical Engineering Congress, Glasgow, Scotland. Non disponible
Gaudreault, C., Martin, G., Samson, R., & Stuart, P. R. LCA modeling of a kraft pulp and paper mill [Communication écrite]. 55th Conference of the Canadian Society for Chemical Engineering (CSChE), Toronto, On.. Non disponible
Gentric, C., Mignon, D., Bousquet, J., & Tanguy, P. A. (2005). Comparison of Mixing in Two Industrial Gas-Liquid Reactors Using Cfd Simulations. Chemical Engineering Science, 60(8-9), 2253-2272. Lien externe
Gigout, A., Buschmann, M. D., & Jolicoeur, M. (mars 2005). Low medium calcium content promotes chondrocytes phenotype in suspension and monolayer culture [Communication écrite]. Transactions of the Orthopedic Research Society, Washington, DC, USA. Non disponible
Gigout, A., Jolicoeur, M., & Buschmann, M. D. (2005). Low Calcium Levels in Serum-Free Media Maintain Chondrocyte Phenotype in Monolayer Culture and Reduce Chondrocyte Aggregation in Suspension Culture. Osteoarthritis and Cartilage, 13(11), 1012-1024. Lien externe
Gigout, A., Jolicoeur, M., & Buschmann, M. D. (juillet 2005). Low medium calcium content promotes chondrocytes phenotype in suspension and monolayer culture [Communication écrite]. Transactions 11th Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Gingras, J. P., Tanguy, P. A., Mariotti, S., & Chaverot, P. (2005). Effect of Process Parameters on Bitumen Emulsions. Chemical Engineering and Processing, 44(9), 979-986. Lien externe
Grmela, M., Lebon, G., Dauby, P. C., & Bousmina, M. (2005). Ballistic-Diffusive Heat Conduction at Nanoscale: Generic Approach. Physics Letters A, 339(3-5), 237-245. Lien externe
Guay, M., Dochain, D., & Perrier, M. (2005). Adaptive Extremum-Seeking Control of Nonisothermal Continuous Stirred Tank Reactors. Chemical Engineering Science, 60(13), 3671-3681. Lien externe
Hamdine, M., Heuzey, M.-C., & Begin, A. (2005). Effect of Organic and Inorganic Acids on Concentrated Chitosan Solutions and Gels. International Journal of Biological Macromolecules, 37(3), 134-142. Lien externe
Hamidipour, M., Mostoufi, N., Sotudeh-Gharebagh, R., & Chaouki, J. (2005). Experimental investigation of particle contact time at the wall of gas fluidized beds. Chemical Engineering Science, 60(15), 4349-4357. Lien externe
Hamidipour, M., Mostoufi, N., Sotudeh-Gharebagh, R., & Chaouki, J. (2005). Monitoring the particle-wall contact in a gas fluidized bed by RPT. Powder Technology, 153(2), 119-126. Lien externe
Harrison, R. P., Leroux, R., & Stuart, P. R. (février 2005). Representing TMP process fundamentals by creating non-linear variables in multivariate analysis [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Harrison, R., Leroux, R., & Stuart, P. R. Data pre-processing techniques for multivariate analysis to treat industrial operating data for retrofit design [Communication écrite]. 2nd Conference CDen, Kananaskis, AB. Lien externe
Heniche, M., Tanguy, P. A., Reeder, M. F., & Fasano, J. B. (2005). Numerical investigation of blade shape in static mixing. AICHE Journal, 51(1), 44-58. Lien externe
Henry, O., Perrier, M., & Kamen, A. (2005). Metabolic Flux Analysis of Hek-293 Cells in Perfusion Cultures for the Production of Adenoviral Vectors. Metabolic Engineering, 7(5-6), 467-476. Lien externe
Héroux, M., & Guy, C. (octobre 2005). Influence of weather parameters on landfill surface emissions [Communication écrite]. 10th International Waste Management and Landfill Symposium, Cagliari, Italy. Lien externe
Hisiger, S., & Jolicoeur, M. (2005). A multiwavelength fluorescence probe: Is one probe capable for on-line monitoring of recombinant protein production and biomass activity? Journal of Biotechnology, 117(4), 325-336. Lien externe
Hisiger, S., & Jolicoeur, M. (2005). Plant Cell Culture Monitoring Using an in Situ Multiwavelength Fluorescence Probe. Biotechnology Progress, 21(2), 580-589. Lien externe
Hoemann, C. D., Hurtig, M., Rossomacha, E., Sun, J., Chevrier, A., Shive, M. S., & Buschmann, M. D. (2005). Chitosan-Glycerol Phosphate/Blood Implants Improve Hyaline Cartilage Repair in Ovine Microfracture Defects. Journal of Bone and Joint Surgery, 87(12), 2671-2686. Lien externe
Hoemann, C. D., Sun, J., Légaré, A., McKee, M. D., & Buschmann, M. D. (2005). Tissue Engineering of Cartilage Using an Injectable and Adhesive Chitosan-Based Cell-Delivery Vehicle. Osteoarthritis and Cartilage, 13(4), 318-329. Lien externe
Hoemann, C. D., Sun, J., McKee, M., Hurtig, M., Rivard, G. E., & Buschmann, M. D. (mars 2005). Rabbit hyaline cartilage repair after marrow stimulation depends on the surgical approach and Chitosan-GP Stabilised In Situ Blood Clot [Communication écrite]. Transactions of the Orthopedic Research Society, Washington, DC, USA. Non disponible
Hoemann, C. D., Sun, J., McKee, M., Hurtig, M., Rivard, G. E., Rossomacha, E., Chevrier, A., & Buschmann, M. D. (juillet 2005). Rabbit hyaline cartilage repair after marrow stimulation depends on the surgical approach together with an in situ stabilized chitosan-GP blood clot [Communication écrite]. Transactions 11th Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Hotea, M. (2005). Mousse obtenue par extrusion du mélange amidon thermoplastique/polystyrène [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hudon, N., Perrier, M., Guay, M., & Dochain, D. (2005). Adaptive Extremum Seeking Control of a Non-Isothermal Tubular Reactor With Unknown Kinetics. Computers & Chemical Engineering, 29(4), 839-849. Lien externe
Hudon, P., Jung, I.-H., & Baker, D. R. (2005). Experimental Investigation and Optimization of Thermodynamic Properties and Phase Diagrams in the Systems Cao-Sio2, Mgo-Sio2, Camgsi2o6-Sio2 and Camgsi2o6-Mg2sio4 to 1 Center Dot 0 Gpa. Journal of Petrology, 46(9), 1859-1880. Lien externe
Ilinca, F., Hetu, J.-F., & Ajersch, F. (juin 2005). Numerical simulation of 3D turbulent flow and heat transfer in a continuous galvanizing bath [Communication écrite]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. Lien externe
Iranshahi, A., Heniche, M., Tanguy, P. A., & Bertrand, F. (janvier 2005). Numerical comparison of the flow characteristics of the Ekato PARAVISC with conventional viscous mixing impellers [Communication écrite]. 55th CSChE Annual Conference, Toronto, ON, Canada. Non disponible
Jahnke, A., Costa, A., & Paris, J. (mai 2005). Caractérisation du fonctionnement d'une pompe à chaleur à absorption [Communication écrite]. VIIe colloque Franco-Québécois sur la thermique des systèmes, Université de Rennes. Non disponible
Jahnke, A., Costa, A., Ziegler, F., & Paris, J. (janvier 2005). Experimental plan and statistical analysis of laboratory results for an absorption heat pump [Communication écrite]. International Absorption Heat Pump Conference, Denver. Non disponible
Janssen, M., Cornejo, F., Riemer, K., Lavallee, H.-C., & Stuart, P. R. (février 2005). Techno-economic considerations for DIP production increase and implementation of cogeneration at an integrated newsprint mill [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
John, R. C., Pelton, A., Thompson, W. T., Young, A. L., & Wright, I. G. (avril 2005). Effects of exposure conditions upon corrosion by HCL and CL₂ Gases [Communication écrite]. NACE-Corrosion 2005, Houston, TX, United states. Lien externe
Jolicoeur, M. (2005). Extracting alkaloids from plant cell culture. Industrial Bioprocessing, 27(2), 8-8. Non disponible
Jou, D., Casas-Vázquez, J., Lebon, G., & Grmela, M. (2005). A Phenomenological Scaling Approach for Heat Transport in Nano-Systems. Applied Mathematics Letters, 18(8), 963-967. Lien externe
Jung, I.-H., Decterov, S., & Pelton, A. (2005). Critical Thermodynamic Evaluation and Optimization of the CaO-MgO-SiO₂ System. Journal of the European Ceramic Society, 25(4), 313-333. Lien externe
Jung, I.-H., Decterov, S., & Pelton, A. (2005). Thermodynamic modeling of the MgO-Al₂O₃-CrO-Cr₂O₃ system. Journal of the American Ceramic Society, 88(7), 1921-1928. Lien externe
Kang, Y.-B., & Lee, H.-G. (2005). Fundamental of High Temperature Processes - Experimental study of phase equilibria in the MnO-SiO₂-"TiO₂"-"Ti₂O₃" system. ISIJ International, 45(11), 1552-1560. Lien externe
Kang, Y.-B., & Lee, H.-G. (2005). Fundamentals of High Temperature Processes - Experimental study of phase equilibria in the MnO-"TiO₂"-"TiO₃" system. ISIJ International, 45(11), 1543-1551. Lien externe
Kirchnerova, J., Cohen, M. L. H., Guy, C., & Klvana, D. (2005). Photocatalytic Oxidation of N-Butanol Under Fluorescent Visible Light Lamp Over Commercial TiO₂ (Hombicat UV100 and Degussa P25). Applied Catalysis. A, General, 282(1-2), 321-332. Lien externe
Klvana, D., Chaouki, J., Guy, C., Kirchnerova, J., & Zanoletti, M. (2005). Performance of auto-cyclic reactor in catalytic combustion of lean fuel mixtures. Industrial and Engineering Chemistry Research, 44(25), 9676-9682. Lien externe
Labelle, M.-A., Juteau, P., Jolicoeur, M., Villemur, R., Parent, S., & Comeau, Y. (2005). Seawater denitrification in a closed mesocosm by a submerged moving bed biofilm reactor. Water Research, 39(14), 3409-3417. Lien externe
Laflamme-Mayer, M., Linkewich, J., & Stuart, P. R. (février 2005). Methodology for using real-time process data for supply chain optimization in the pulp and paper industry [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Lafourcade, S., & Stuart, P. R. Heuristic based on pinch techniques for practical identification of water and energy reduction opportunities in newsprint Mills [Communication écrite]. 55th Conference of the Canadian Society for Chemical Engineering (CSChE), Toronto, On.. Non disponible
Lama, I., Perrier, M., & Stuart, P. R. (septembre 2005). Directionality of process interactions in TMP-refining [Communication écrite]. Paprican University Report. Non disponible
Lama, I., Perrier, M., & Stuart, P. R. (septembre 2005). An empirical model for predicting motor load changes due to plate wear in TMP refiners [Communication écrite]. Paprican University Report. Non disponible
Lama, I., Perrier, M., & Stuart, P. R. (septembre 2005). Modeling of TMP refining process [Communication écrite]. Paprican University Report. Non disponible
Lamboursain, L., & Jolicoeur, M. (2005). Critical influence of Eschscholzia californica cells nutritional state on secondary metabolite production. Biotechnology and Bioengineering, 91(7), 827-837. Lien externe
Lamboursain, L., & Jolicoeur, M. (2005). Determination of cell concentration in a plant cell suspension using a fluorescence microplate reader. Plant cell report, 23(10-11), 665-672. Lien externe
Lécuyer, H., Mmbaga, J., Bertrand, F., Tanguy, P. A., & Hayes, R. E. (janvier 2005). Numerical investigation of non-newtonian coating flows in high speed forward deformable roll coaters [Communication écrite]. 55th CSChE Annual Conference, Toronto, ON, Canada. Non disponible
Lemieux, M., Doucet, J., Leclaire, L. A., Bertrand, F., & Chaouki, J. (janvier 2005). DEM-based simulations of powder flows in v-blenders [Communication écrite]. 2005 Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France. Non disponible
Lemieux, M., Doucet, J., Leclaire, L.-A., Léonard, G., Bertrand, F., & Chaouki, J. (janvier 2005). Large scale numerical investigation of particle mixing in v-blender using the discrete element method [Communication écrite]. 55th CSChE Annual Conference, Toronto, ON, Canada. Non disponible
Lemieux, M., Léonard, G., Doucet, J., Leclaire, L. A., Viens, F., Bertrand, F., & Chaouki, J. (janvier 2005). Large-scale numerical investigation of solids mixing in a v-blender using the discrete element method [Communication écrite]. 2005 Particulate Processes in the Pharmaceutical Industry, Montréal, Qc, Canada. Non disponible
Léonard, G. (2005). Caractérisation du mélange de poudres dans les procédés pharmaceutiques à l'aide de mesures d'effusivité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Léonard, G., Bertrand, F., Chaouki, J., & Gosselin, P. (janvier 2005). An experimental investigation of effusivity as an indicator of powder blend uniformity [Communication écrite]. 2005 Particulate Processes in the Pharmaceutical Industry, Montréal, Qc, Canada. Non disponible
Lertwimolnun, W., Vergnes, B., Ausias, G., & Carreau, P. (octobre 2005). Caractéristique rhéologique de nanocomposites polypropylène/argile en régime transitoire [Communication écrite]. 40e Colloque annuel du Groupe français de rhéologie, Nice, France (5 pages). Lien externe
Lesage, P. (2005). Analyse environnementale de la réhabilitation-valorisation de friches industrielles urbaines [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Levesque, R., Vaudreuil, S., Mighri, F., & Bousmina, M. (2005). Thermally-Activated Non-Reversible Response of Polystyrene/ Polyvinyl Methyl Ether (PS/PVME) Sandwich Sample Under Small-Amplitude Oscillatory Shear Flow. Journal of Polymer Engineering, 25(6), 487-499. Lien externe
Litto, R., Hayes, R. E., Sapoundjiev, H., Fuxman, A., Forbes, F., Liu, B., & Bertrand, F. (septembre 2005). Optimization of a catalytic flow reversal reactor for the combustion of lean methane mixtures [Communication écrite]. 6th International Workshop on Catalytic Combustion (IWCC6), Ischia, Italy. Non disponible
Lorences, M. J., Patience, G. S., Cenni, R., Diez, F., & Coca, J. (janvier 2005). VPO lattice oxygen contribution [Communication écrite]. 1st Conference of the European Union Coordination Action "CO-ordination of Nanostructured Catalytic Oxides Research and Development in Europe, Concorde, Belgium. Non disponible
Lorences, M. J., Patience, G. S., Cenni, R., Diez, F., & Coco, J. (mai 2005). Accelerating butane oxidation kinetics over VPO [Communication écrite]. 19th NAM, Philadelphia. Non disponible
Mabrouk, R., Chaouki, J., & Guy, C. (mai 2005). Particle-wall friction factor in upward gas solid flow [Communication écrite]. 8th Circulating Fluidized Beds Conference, Hangzhou, China. Non disponible
Mabrouk, R., Radmanesh, R., Chaouki, J., & Guy, C. (2005). Scale Effects on Fluidized Bed Hydrodynamics. International Journal of Chemical Reactor Engineering, 3(1), 13 pages. Lien externe
Manski, S. S., Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. Simulation of roll coating process using FEMLAB [Communication écrite]. FEMLAB Conference 2005, Boston, USA. Non disponible
Mary, B. (2005). Étude rhéologique de suspensions de poudres d'aluminium nanométriques enrobées de polyéthylène [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mihai, M. H., Huneault, M. A., & Favis, B. D. (mai 2005). Foams extruded from polystyrene / thermoplastic starch blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (2005). Flow Simulation in the Nip of a Rigid Forward Roll Coater. International Journal for Numerical Methods in Fluids, 48(10), 1041-1066. Lien externe
Mobuchon, C., Carreau, P., Heuzey, M.-C., Sepehr, M., & Ausias, G. (2005). Shear and extensional properties of short glass fiber reinforced polypropylene. Polymer Composites, 26(3), 247-264. Lien externe
Morel, E., Santamaria, K., Perrier, M., Guiot, S. R., & Tartakovsky, B. (2005). Multi-Wavelength Fluorometry for Anaerobic Digestion Process Monitoring. Water Science and Technology, 52(1-2), 465-471. Lien externe
Neculita, C.-M., Zagury, G. J., & Deschênes, L. (2005). Mercury speciation in highly contaminated soils from Chlor-Alkali Plants using chemical extractions. Journal of Environmental Quality, 34(1), 255-262. Lien externe
Ortiz, M. (2005). Analyse multivariée de données d'opération d'une usine intégrée de pâte et papier [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Patience, G. S., Lorences, M. J., Cenni, R., Diez, F., & Coco, J. (juillet 2005). Carbon deposition on VPO catalyst [Communication écrite]. International symposium on relations between homogeneos/heterogeneous catalysis (ISHHC) 12, Florence. Non disponible
Pelton, A. (janvier 2004). Thermodynamic models and databases for slags, fluxes and salts [Communication écrite]. 7th International Conference on Molten Slags, Fluxes and Salts, Cape Town, South Africa. Publié dans Transactions of the Institutions of Mining and Metallurgy. Section C, Mineral Processing and Extractive Metallurgy, 114(3). Lien externe
Perrier, M., Bertrand, F., Dubois, C., Klvana, D., Legros, R., & Farand, P. (juin 2005). A case study in curriculum integration of core courses in chemical engineering [Communication écrite]. 2005 ELD/ASEE Annual Conference, Portland, Oregon, USA. Non disponible
Perrier, M., Bertrand, F., Dubois, C., Klvana, D., Legros, R., & Farand, P. (juin 2005). Integrating process control unit operations in a single core course of the chemical engineering curriculum [Communication écrite]. 2nd Canadian Design Engineering Network Conference, Kananaskis, AB, Canada. Non disponible
Pigeon, B. (2005). Optimisation du coût de la variabilité via formage de fonction de densité de probabilité par contrôleur commutant [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Purenne, P., Pagé, T., & Guy, C. (février 2005). Suivi des odeurs à la station d'épuration des eaux usées de la ville de Montréal [Communication écrite]. Journées techniques nationales sur les Pollutions olfactives des installations classées : de l'évaluation de la gêne aux techniques de réduction, Angers. Non disponible
Quenneville, E., & Buschmann, M. D. (2005). A transport model of electrolyte convection through a charged membrane predicts generation of net charge at membrane/electrolyte interfaces. Journal of Membrane Science, 265(1-2), 60-73. Lien externe
Radmanesh, R., Chaouki, J., Mabrouk, R., & Guy, C. (2005). Effect of temperature on solids mixing in a bubbling fluidized bed reactor. International Journal of Chemical Reactor Engineering, 3(1), 16 pages. Lien externe
Rajabian, M., Dubois, C., & Grmela, M. (2005). Suspensions of Semiflexible Fibers in Polymeric Fluids: Rheology and Thermodynamics. Rheologica Acta, 44(5), 521-535. Lien externe
Robelin, C., & Chartrand, P. (mai 2005). Modeling the volumetric properties of multicomponent liquids : the NaCl-KCl-MgCl2-CaCl2 and Na[+], Al[3+], Ca[2+] // F[-], O[2-] systems [Présentation]. Dans CALPHAD XXXIV, Maastricht, The Netherlands. Non disponible
Roh, S. A., Jung, D. S., Kim, S. D., & Guy, C. (2005). Combustion Characteristics of Spent Catalyst and Paper Sludge in an Internally Circulating Fluidized-Bed Combustor. Journal of the Air & Waste Management Association, 55(9), 1269-1276. Lien externe
Rossomacha, E., Hoemann, C. D., Chevrier, A., & Shive, M. S. (2005). Microwave histoprocessing : one-step dehydration and clearing of articular cartilage and synovial tissue. Histologic, 38(2), 25-25. Lien externe
Roy, G. (2005). Modélisation technique et économique d'un réacteur de bioséchage discontinu [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sadeghi, F., Ajji, A., & Carreau, P. (2005). Study of polypropylene morphology obtained from blown and cast film processes: Initial morphology requirements for making porous membrane by stretching. Journal of Plastic Film & Sheeting, 21(3), 199-216. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (mai 2023). Study of polypropylene morphology to obtain porous membranes by stretching [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston. Lien externe
Salazar, E., Samson, R., Munnoch, K., & Stuart, P. R. (février 2005). Identifying environmental improvement opportunities for newsprint production using Life Cycle Assessment (LCA) [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2005). Non disponible
Sarazin, P., & Favis, B. D. (2005). Influence of Temperature-Induced Coalescence Effects on Co-Continuous Morphology in Poly(Epsilon-Caprolactone)/Polystyrene Blends. Polymer, 46(16), 5966-5978. Lien externe
Sarazin, P., Huneault, M. A., Orts, W., & Favis, B. D. (mai 2005). Blends of polylactide with thermoplastic starch [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Schoefs, O., Jean, L., Ellert, A., Perrier, M., & Samson, R. (2005). Modeling the Kinetics of Contaminant Biodegradation by a Mixed Microbial Consortium Based on Carbon Mass Balance. Soil & Sediment Contamination, 14(2), 171-182. Lien externe
Shafiei, S., Floquet, P., Domenech, S., & Paris, J. (2005). Genetic algorithm reliability for white water network optimization in pulp and paper industry. Chemical Engineering Transactions, 6, 221-226. Non disponible
Tanguy, P. A., Bertrand, J., & Xuereb, C. (2005). Innovative Studies in Industrial Mixing Processes. Chemical Engineering Science, 60(8-9), 2099-2099. Lien externe
Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2005). Mechanical Properties and Morphology of Ternary Pp/Epdm/Pe Blends. Canadian Journal of Chemical Engineering, 83(2), 300-309. Lien externe
Thibault, M., & Buschmann, M. D. (juillet 2005). Methodology to Obtain Four Color Confocal Fluorescent Image of the Cytoskeleton and Nucleus in 3D Migrating Bone Marrow-Stromal Cells [Communication écrite]. Transactions of the American Society for Cell Biology 2005 Summer Meeting on Engineering Cell Biology, University of Washington, Seattle. Non disponible
Toffoletto, L., Deschênes, L., & Samson, R. (2005). LCA of Ex-Situ Bioremediation of Diesel-Contaminated Soil. International Journal of Life Cycle Assessment, 10(6), 406-416. Lien externe
Tran-Khanh, N., Hoemann, C. D., McKee, M. D., Henderson, J. E., & Buschmann, M. D. (juillet 2005). Aged bovine chondrocytes display a diminished capacity to produce a collagen-rich, mechanically funcitonal cartilage extracellular matrix [Communication écrite]. Transactions 11th Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Tran-Khanh, N., Hoemann, C. D., McKee, M. D., Henderson, J. E., & Buschmann, M. D. (2005). Aged Bovine Chondrocytes Display a Diminished Capacity to Produce a Collagen-Rich, Mechanically Functional Cartilage Extracellular Matrix. Journal of Orthopaedic Research, 23(6), 1354-1362. Lien externe
Tran-Khanh, T., Hoemann, C. D., & Buschmann, M. D. (mars 2005). Cell Proliferation and Collagen Production Decline with Age in Bovine Chondrocytes [Communication écrite]. Transactions of the Orthopedic Research Society, Washington, DC, USA. Non disponible
Turon, X., Labidi, J., & Paris, J. (2005). Simulation and Optimisation of a High Grade Coated Paper Mill. Journal of Cleaner Production, 13(15), 1424-1433. Lien externe
Van De Ven, T. G. M., Qasaimeh, M. A., & Paris, J. (2005). Fines Deposition on Pulp Fibers and Fines Flocculation in a Turbulent-Flow Loop. Industrial & Engineering Chemistry Research, 44(5), 1291-1295. Lien externe
Venkatesh, R. D., Grmela, M., & Chaouki, J. (2005). Improvement of fluidizability of fine powders - a computer study. China Particuology, 3(3), 165-169. Lien externe
Via, D., Stuart, P. R., & Perrier, M. (mai 2005). Developing a dynamic simulation [Communication écrite]. 8th Conference on Process Integration Modeling and Optimization for Energy Saving and Pollution Reduction - PRES'05, Giardini Naxos, Italy. Publié dans Chemical Engineering Transactions, 7. Non disponible
Virgilio, N., Favis, B. D., Pepin, M. F., Desjardins, P., & L'Espérance, G. (2005). High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy. Macromolecules, 38(6), 2368-2375. Lien externe
Virgilio, N., Pépin, M. F., Desjardins, P., L'Espérance, G., & Favis, B. D. (août 2005). High contrast imaging of interphases in ternary polymer blends using focused ion beam preparation and atomic force microscopy [Communication écrite]. PPS 2005 America's Regional Meeting of the Polymer Processing Society, Québec, QC, Canada.. Non disponible
Waldner, P., & Pelton, A. (2005). Thermodynamic Modeling of the Fe-S System. Journal of Phase Equilibria and Diffusion, 26(1), 23-38. Lien externe
Wising, U., & Stuart, P. R. The potential for the kraft bio-refinery in the Canadian Pulp & Paper Industry [Communication écrite]. 55th Conference of the Canadian Society for Chemical Engineering (CSChE), Toronto, On.. Non disponible
Wising, U., Berntsson, T., & Stuart, P. R. (2005). The potential for energy savings when reducing the water consumption in a kraft pulp mill. Applied Thermal Engineering, 25(7), 1057-1066. Lien externe
Wising, U., Berntsson, T., Riemer, K., & Stuart, P. R. (février 2005). Strategic approach to co-generation design [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC). Non disponible
Xu, S., Qu, Y., Chaouki, J., & Guy, C. (2005). Characterization of homogeneity of bubble flows in bubble columns using RPT and fibre optics. International Journal of Chemical Reactor Engineering, 3(1), 16 pages. Lien externe
Yuan, Z. H., & Favis, B. D. (2005). Coarsening of Immiscible Co-Continuous Blends During Quiescent Annealing. AICHE Journal, 51(1), 271-280. Lien externe
Zhijie, Z., & Lafleur, P. (mai 2005). Study on aerodynamics of cooling in film blowing [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Zmievski, V., Grmela, M., Bousmina, M., & Dagreou, S. (2005). Nonlinear microstructure and rheology of semidilute colloidal suspensions of structureless particles. Physical Review. E, Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 71(5), 51503-1. Lien externe
