<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Sirois, Frédéric"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : A | B | C | D | E | F | G | H | J | K | L | M | N | P | R | S | T | V | W | Y | Z
Nombre de documents: 170

A

Arsenault, A., Charpentier-Pépin, B., Forcier, A., Nassiri, N., Bellemare, J., Lacroix, C., Ménard, D., Sirois, F., Bernier, F., & Lamarre, J.-M. (2023). Large-scale vibrating coil magnetometer for the magnetic characterization of bulk superconductors. Review of Scientific Instruments, 94(8), 085116 (9 pages). Lien externe

Arsenault, A., de Sousa Alves, B., Giard, G., & Sirois, F. (2023). Magnetodynamic H-ϕ Formulation for Improving the Convergence and Speed of Numerical Simulations of Superconducting Materials. IEEE Transactions on Applied Superconductivity, 33(7), 1-6. Lien externe

Arsenault, A., & Sirois, F. (2023). Simulation of Remote Forces Generated by High-Temperature Superconducting Bulks for Magnetic Drug Delivery. IEEE Transactions on Applied Superconductivity, 33(6), 1-9. Lien externe

Arsenault, A., De Sousa Alves, B., & Sirois, F. (2021). COMSOL implementation of the H-ϕ-Formulation with thin cuts for modeling superconductors with transport currents. IEEE Transactions on Applied Superconductivity, 31(6), 1-9. Lien externe

Arsenault, A., Sirois, F., & Grilli, F. (2021). Efficient modeling of high temperature superconductors surrounded by magnetic components using a reduced H-phi formulation. IEEE Transactions on Applied Superconductivity, 31(4), 1-9. Lien externe

Alves, B. S., Sabariego, R. V., Laforest, M., & Sirois, F. (2021). Hyperbolic Basis Functions for Time-Transient Analysis of Eddy Currents in Conductive and Magnetic Thin Sheets. IEEE Transactions on Magnetics, 57(11), 1-10. Lien externe

Arsenault, A., Sirois, F., & Grilli, F. (2021). Implementation of the H-ϕ formulation in COMSOL Multiphysics for simulating the magnetization of bulk superconductors and comparison with the H-formulation. IEEE Transactions on Applied Superconductivity, 31(2), 1-11. Lien externe

April, G.-É., Sirois, F., & Morin, J.-N. (2017). Energy storage device and modular circuit. (Demande de brevet no US20170250551). Lien externe

Arguin, M., Sirois, F., & Therriault, D. (2015). Electric field induced alignment of multiwalled carbon nanotubes in polymers and multiscale composites. Advanced Manufacturing: Polymer & Composites Science, 1(1), 16-25. Disponible

Arguin, M., Sirois, F., & Therriault, D. (septembre 2013). Electric field alignement of multi-wall carbon nanotubes in epoxy matrix in order to establish preferential current path flows [Communication écrite]. Composites Week@Leuven, Leuven, Belgium. Non disponible

Arguin, M., Sirois, F., & Therriault, D. (juillet 2013). Impact of carbon nanotubes on electrical conductivity of carbon fiber multiscale composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

B

Barusco, P., Ben Saad, H., Horn-Bourque, D., Lacroix, C., Sirois, F., Puig, T., Gutiérrez, J., Granados, X., & Obradors, X. (septembre 2023). Enhanced normal zone propagation velocity in REBCO coated conductors using an intermetallic stabilizer coating [Communication écrite]. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy (6 pages). Publié dans IEEE Transactions on Applied Superconductivity. Disponible

Barusco, P., Ben-Saad, H., Horn-Bourque, D., Lacroix, C., Sirois, F., Puig, T., Gutierrez, J., Granados, X., & Obradors, X. (2024). Enhanced Normal Zone Propagation Velocity in REBCO Coated Conductors Using an Intermetallic Stabilizer Coating. IEEE Transactions on Applied Superconductivity, 34(3), 6600906 (6 pages). Lien externe

Barusco, P., Giguère, J., Lacroix, C., Sirois, F., Granados, X., Puig, T., & Obradors, X. (2023). A sulfurization method for creating the buffer-layers current flow diverter architecture in REBa₂Cu₃O₇ coated conductors. Superconductor Science & Technology, 36(12), 125005 (11 pages). Disponible

Brahim, Y. I., Bellemare, J., Rousseau, G., Pouliot, N., Ménard, D., & Sirois, F. (2023). Ultrasensitive lightweight magnetic probe for non-destructive inspection of high-voltage overhead lines. NDT & E International, 134, 102781 (12 pages). Lien externe

Barusco, P., Granados, X., Saltarelli, L., Fournier-Lupien, J.-H., Lacroix, C., Saad, H. B., Sirois, F., Vlad, V. R., Calleja, A., Grosse, V., Puig, T., & Obradors, X. (2022). Chemical Solution Deposition of Insulating Yttria Nanolayers as Current Flow Diverter in Superconducting GdBa2Cu3O7−δ Coated Conductors. ACS Omega, 7(18), 15315-15325. Lien externe

Bagrets, N., Nast, R., Fournier-Lupien, J.-H., Sirois, F., Celentano, G., & Weiss, K.-P. (2021). Current transfer length and interfacial resistance between superconductors and metals in commercial REBCO tapes and cables. IEEE Transactions on Applied Superconductivity, 31(6), 1-8. Lien externe

Bellemare, J., Rousseau, G. A., Valiquette, D., Sirois, F., & Pouliot, N. (octobre 2021). Reporting on the last 6 years of field inspections using LineCore for the non-destructive evaluation of overhead conductors [Communication écrite]. 16th Annual CIGRE Canada Conference & Expo, Toronto, Ont.. Lien externe

Bellemare, J., Laliberté-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Coating density as the key factor behind hydrogen embrittlement of cadmium-plated 4340 steel. Journal of Applied Electrochemistry, 50(10), 1045-1058. Lien externe

Bellemare, J., Ménard, D., & Sirois, F. (2020). Detection of Hydrogen Embrittlement in Plated High-Strength Steels with Eddy Currents: Is the Sensitivity Sufficient? Journal of Nondestructive Evaluation, 39(2), 46 (15 pages). Lien externe

Bellemare, J., Laliberte-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Subtleties Behind Hydrogen Embrittlement of Cadmium-Plated 4340 Steel Revealed by Thermal Desorption Spectroscopy and Sustained-Load Tests. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(6), 3054-3065. Lien externe

Bonnard, C. H., Sirois, F., Lacroix, C., & Didier, G. (2017). Multi-scale model of resistive-type superconducting fault current limiters based on 2G HTS coated conductors. Superconductor Science and Technology, 30(1), 14 pages. Lien externe

Bonnard, C.-H., Sirois, F., Lacroix, C., & Didier, G. (juin 2016). Multi-scale model of rSFCLs in EMTP-RV power system transient simulator [Présentation]. Dans 5th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS Modelling 2016), Bologna, Italy (57 pages). Non disponible

Bellemare, J., Carignan, L.-P., Sirois, F., & Ménard, D. (2015). Etching the oxide barrier of micrometer-scale self-organized porous anodic alumina membranes. Journal of The Electrochemical Society, 162(4), E47-E50. Disponible

Barghi-Nia, S., & Sirois, F. (juillet 2015). Development of stochastic models for assessing the impact of Electric Vehicles in distribution grids [Communication écrite]. IEEE Power and Energy Society General Meeting (PESGM 2015), Denver, CO, United states (5 pages). Lien externe

Bonnard, C.-H., Sirois, F., Didier, G., Douine, B., & Lévêque, J. (juin 2015). Limiteur de courant de court-circuit supraconducteur résistif : prémices d'un modèle circuit multi-échelle [Communication écrite]. 13e Conférence des Jeunes Chercheurs en Génie Électrique (JCGE 2015), Cherbourg, France. Publié dans Revue 3EI, 82. Non disponible

Bellemare, J., Sirois, F., & Ménard, D. (2014). Fabrication of Micrometer-Scale Self-Organized Pore Arrays in Anodic Alumina. Journal of The Electrochemical Society, 161(5), E75-E80. Lien externe

Babic, S., Sirois, F., Akyel, C., Lemarquand, G., Lemarquand, V., & Ravaud, R. (2012). Erratum: New formulas for mutual inductance and axial magnetic force between a thin wall solenoid and a thick circular coil of rectangular cross-section. IEEE Transactions on Magnetics, 48(6), 2096-2096. Lien externe

Babic, S., Akyel, C., Sirois, F., Lemarquand, G., Ravaud, R., & Lemarquand, V. (2011). Calculation of the mutual inductance and the magnetic force between a thick circular coil of the rectangular cross section and a thin wall solenoid (integro-differential approach). Progress In Electromagnetics Research B, 33(33), 221-237. Lien externe

Bernstein, P., McLoughlin, C., Thimont, Y., Sirois, F., & Coulombe, J. (2011). Current sharing between the metallic and superconducting layers of high temperature superconductor coated conductors operated above their critical current. Journal of Applied Physics, 109(3), 033915-033915. Lien externe

Bernstein, P., McLoughlin, C., Thimont, Y., Sirois, F., & Coulombe, J. (2011). Investigation of power dissipation mechanisms in coated conductors at high current densities based on ultra-fast pulsed current measurements. IEEE Transactions on Applied Superconductivity, 21(3), 3417-3420. Lien externe

Babic, S., Sirois, F., Akyel, C., Lemarquand, G., Lemarquand, V., & Ravaud, R. (2011). New formulas for mutual inductance and axial magnetic force between a thin wall solenoid and a thick circular coil of rectangular cross-section. IEEE Transactions on Magnetics, 47(8), 2034-2044. Lien externe

Babic, S., Sirois, F., Akyel, C., & Girardi, C. (2010). Mutual Inductance Calculation Between Circular Filaments Arbitrarily Positioned in Space: Alternative to Grover's Formula. IEEE Transactions on Magnetics, 46(9), 3591-3600. Lien externe

Brambilla, R., Grilli, F., Nguyen, D. N., Martini, L., & Sirois, F. (2009). AC losses in thin superconductors: The integral equation method applied to stacks and windings. Superconductor Science and Technology, 22(7). Lien externe

Babic, S., Sirois, F., & Akyel, C. (2009). Validity check of mutual inductance formulas for circular filaments with lateral and angular misalignments. Progress In Electromagnetics Research M, 8, 15-26. Lien externe

Brambilla, R., Grilli, F., Martinu, L., & Sirois, F. (2008). Integral Equations for the Current Density in Thin Conductors and Their Solution by the Finite-Element Method. Superconductor Science and Technology, 21(10), 105008-105008. Lien externe

Brochu, J., Sirois, F., Garant, L., & Allard, J. (2007). Comparison of Substation Uprating Techniques Using a Novel Graphical Method Based on System Planning Constraints. IEEE Transactions on Power Delivery, 22(3), 1956-1964. Lien externe

Brochu, J., Sirois, F., Beauregard, F., Cloutier, R., Bergeron, A., & Henderson, M. I. (août 2006). Innovative Applications of Phase-Shifting Transformers Supplemented with Series Reactive Elements [Communication écrite]. CIGRE 2006, Paris, France. Lien externe

C

Che, H., Gagné, M., Rajesh, P. S. M., Sapieha, J.-E., Sirois, F., Therriault, D., & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211. Lien externe

Celebi, S., Sirois, F., & Lacroix, C. (2015). Collapse of the magnetization by the application of crossed magnetic fields: observations in a commercial Bi:2223/Ag tape and comparison with numerical computations. Superconductor Science and Technology, 28(2), 025012 (9 pages). Lien externe

Colangelo, D., Memiaghe, S., Lacroix, C., Sirois, F., & Dutoit, B. (septembre 2011). Impact of inhomogeneities in HTS coated conductors for resistive FCLs [Communication écrite]. Superconductivity Centennial Conference (SCC 2011), The Hague, the Netherlands. Publié dans Physics Procedia, 36. Lien externe

D

De Sousa Alves, B., Laforest, M., & Sirois, F. (2022). 3-D Finite-Element Thin-Shell Model for High-Temperature Superconducting Tapes. IEEE Transactions on Applied Superconductivity, 32(3), 1-11. Lien externe

Dutoit, B., Grilli, F., & Sirois, F. (2022). Numerical Modeling of Superconducting Applications : simulation of Electromagnetics, Thermal Stability, Thermo-Hydraulics and Mechanical Effects in Large-Scale Superconducting Devices. Lien externe

de Sousa Alves, B., Lahtinen, V., Laforest, M., & Sirois, F. (2022). Thin-shell approach for modeling superconducting tapes in the H-φ finite-element formulation. Superconductor Science & Technology, 35(2), 024001 (14 pages). Lien externe

de Juan, S., Gordo, E., Jiménez-Morales, A., & Sirois, F. (2021). Response of electroless copper coated CFRP laminates to emulated lightning strikes. Composites Part A: Applied Science and Manufacturing, 140, 106184 (10 pages). Lien externe

de Juan, S., Gordo, E., Jiménez-Morales, A., & Sirois, F. (2020). Study on the Growth and Properties of Electrolessly Deposited Thin Copper Coatings on Epoxy-Based CFRP. Coatings, 10(3), 271 (16 pages). Lien externe

Douine, B., Berger, K., Bonnard, C. H., Sirois, F., Kameni, A., & Leveque, J. (2016). Improved Method for Determining the n-Value of HTS Bulks. IEEE Transactions on Applied Superconductivity, 26(3), 1-4. Lien externe

Douine, B., Bonnard, C.-H., Sirois, F., Berger, K., Kameni, A., & Leveque, J. (2015). Determination of JC and n-Value of HTS Pellets by Measurement and Simulation of Magnetic Field Penetration. IEEE Transactions on Applied Superconductivity, 25(4), 1-8. Lien externe

Douine, B., Sirois, F., Leveque, J., Berger, K., Bonnard, C.-H., Hoang, T.-C., & Mezani, S. (2012). A new direct magnetic method for determining JC in bulk superconductors from magnetic field diffusion measurements. IEEE Transactions on Applied Superconductivity, 22(3), 9001604-9001604. Lien externe

Dione, M., Sirois, F., & Bonnard, C.-H. (2011). Evaluation of the Impact of Superconducting Fault Current Limiters on Power System Network Protections Using a RTS-PHIL Methodology. IEEE Transactions on Applied Superconductivity, 21(3), 2193-2196. Lien externe

Dione, M., Sirois, F., Grilli, F., & Mahseredjian, J. (2009). New EMTP-RV equivalent circuit model of core-shielding superconducting fault current limiter taking into account the flux diffusion phenomenon. IEEE Transactions on Applied Superconductivity, 19(3), 1913-1917. Lien externe

E

Escamez, G., Sirois, F., Tousignant, M., Badel, A., Granger, C., Tixador, P., & Bruzek, C.-É. (2017). Experimental characterization of the constitutive materials of MgB2 multi-filamentary wires for the development of 3D numerical models. Superconductor Science and Technology, 30(3), 10 pages. Lien externe

Escamez, G., Sirois, F., Lahtinen, V., Stenvall, A., Badel, A., Tixador, P., Ramdane, B., Meunier, G., Perrin-Bit, R., & Bruzek, C.-É. (2016). 3-D numerical modeling of AC losses in multifilamentary MgB₂ wires. IEEE Transactions on Applied Superconductivity, 26(3), 1-7. Lien externe

Escamez, G., Sirois, F., Tousignant, M., Ramdane, B., Meunier, G., Badel, A., Tixador, P., & Bruzek, C.-E. (juin 2016). Modélisation des pertes AC d'un conducteur multifilamentaire MgB₂ pour câbles fort courant [Communication écrite]. Symposium de génie électrique (SGE 2016), Grenoble, France (7 pages). Lien externe

Escamez, G., Sirois, F., Badel, A., Meunier, G., Ramdane, B., & Tixador, P. (2016). Numerical Impact of Using Different E-J Relationships for 3-D Simulations of AC Losses in MgB₂ Superconducting Wires. IEEE Transactions on Magnetics, 52(3), 1-4. Lien externe

F

Fournier-Lupien, J.-H., Sirois, F., & Lacroix, C. (2021). Concepts of static vs. dynamic current transfer length in 2G HTS coated conductors with a current flow diverter architecture. Superconductor Science and Technology, 34(8), 12 pages. Lien externe

Fournier-Lupien, J.-H., Lacroix, C., Huh, J., Masse, J.-P., Bellemare, J., & Sirois, F. (2021). Effect of annealing on HTS tapes with a cerium oxide layer inserted between the REBaCuO and silver layers. Materialia, 15, 8 pages. Lien externe

Fournier-Lupien, J.-H., Del Vecchio, P., Lacroix, C., & Sirois, F. (2020). An analytical model of 2D electric potential and current transfer in superconducting tapes with a current flow diverter architecture. Superconductor Science and Technology, 33(11), 115014 (14 pages). Lien externe

Fournier-Lupien, J. H., Lacroix, C., Hellmann, S., Huh, J., Pfeiffer, K., & Sirois, F. (2018). Use of the buffer layers as a current flow diverter in 2G HTS coated conductors. Superconductor Science and Technology, 31(12), 8 pages. Lien externe

G

Giard, G., McMeekin, K., Tousignant, M., & Sirois, F. (2023). Experimental Validation of a New Power-Equivalent Magnetic Permeability Model for Induction Heating Applications. IEEE Transactions on Magnetics, 59(11), 6301503 (9 pages). Lien externe

Giard, G., Tousignant, M., McMeekin, K., Bellotto, F., Bocher, P., & Sirois, F. (2022). Power-Equivalent Complex Permeability Model for Nonlinear and Hysteretic Materials in the Frequency Domain for Induction Heating Applications. IEEE Transactions on Magnetics, 58(6), 1-9. Lien externe

Giguere, J., Lacroix, C., Dupuis-Desloges, F., Fournier-Lupien, J.-H., & Sirois, F. (2021). High normal zone propagation velocity in copper-stabilized 2G HTS coated conductors. Superconductor Science and Technology, 34(4), 8 pages. Lien externe

Gyuraki, R., Schreiner, F., Benkel, T., Sirois, F., & Grilli, F. (2020). Fluorescent thermal imaging of a quench in insulated and non-insulated REBCO-wound pancake coils following a heater pulse at 77 K. Superconductor Science and Technology, 33(3), 8 pages. Lien externe

Gyuráki, R., Benkel, T., Schreiner, F., Sirois, F., & Grilli, F. (2019). Fluorescent thermal imaging of a non-insulated pancake coil wound from high temperature superconductor tape. Superconductor Science and Technology, 32(10), 105006 (5 pages). Disponible

Gyuráki, R., Sirois, F., & Grilli, F. (2018). High-speed fluorescent thermal imaging of quench propagation in high temperature superconductor tapes. Superconductor Science and Technology, 31(3), 034003 (7 pages). Lien externe

Grilli, F., Sirois, F., Zermeno, V. M. R., & Vojenciak, M. (2014). Self-consistent modeling of the IC of HTS devices: How accurate do models really need to be? IEEE Transactions on Applied Superconductivity, 24(6), 8-8. Lien externe

Grilli, F., Brambilla, R., Sirois, F., Stenvall, A., & Memiaghe, S. (2013). Development of a Three-Dimensional Finite-Element Model for High-Temperature Superconductors Based on the H-Formulation. Cryogenics, 53, 142-147. Lien externe

Gaha, M., Gagnon, M., & Sirois, F. (août 2011). A modern Blackboard system [Communication écrite]. IEEE/WIC/ACM International Joint Conferences on Web Intelligence and Intelligent Agent Technology - Workshops (WI-IAT 2011), Lyon, France. Lien externe

Grilli, F., Sirois, F., Brault, S., Brambilla, R., Martini, L., Nguyen, D. N., & Goldacker, W. (2010). Edge and top/bottom losses in non-inductive coated conductor coils with small separation between tapes. Superconductor Science and Technology, 23(3), 034017-034017. Lien externe

Grilli, F., Brambilla, R., Martini, L. F., Sirois, F., Nguyen, D. N., & Ashworth, S. P. (2009). Current density distribution in multiple YBCO coated conductors by coupled integral equations. IEEE Transactions on Applied Superconductivity, 19(3), 2859-62. Lien externe

Golkhah, M., Hurteau, R., & Sirois, F. (août 2009). Design and real-time implementation of power system stabilizers [Communication écrite]. Real-Time Conference, Montréal, Québec. Non disponible

Grilli, F., Sirois, F., Laforest, M., & Ashworth, S. P. (2009). Periodic space-time formulation for numerical AC loss computation in superconductors. IEEE Transactions on Applied Superconductivity, 19(3), 3565-3568. Lien externe

Grilli, F., Sirois, F., Laforest, M., & Ashworth, S. P. (octobre 2008). Space-time formulation for finite-element modeling of superconductors [Communication écrite]. COMSOL Conference 2008, Boston. Lien externe

H

Hajizadeh, F., Alavoine, L., Ould-Bachir, T., Sirois, F., & David, J. P. (août 2023). FPGA-based FDNE models for the accurate real-time simulation of power systems in aircraft [Communication écrite]. 12th International Conference on Renewable Energy Research and Application, Oshawa, ON, Canada (5 pages). Lien externe

J

Javadi, A., Olivier, G., Sirois, F., & Youmssi, A. (mai 2010). Real-Time Laboratory Implementation Results of an Active Filter [Communication écrite]. 9th International Conference on Environment and Electrical Engineering (EEEIC 2010), Prague, Czech Republic (4 pages). Lien externe

Javadi, A., Olivier, G., & Sirois, F. (2010). A Real-Time Power Hardware-in-the-Loop Implementation of an Active Filter. Przeglad Elektrotechniczny, 86(11A), 7-12. Lien externe

Javadi, A., Olivier, G., Sirois, F., & Cojocaru, R. (août 2009). Active filter dynamic study using opal-RT simulator [Communication écrite]. 2nd annual Opal RT International Users Conference, Montréal, Québec. Non disponible

K

Kleiner, R., Hott, R., Wolf, T., Zwicknagl, G., Belogolovskii, M., Ruggiero, S. T., Wimbush, S. C., Grilli, F., & Sirois, F. (2015). Fundamentals : AC Losses and Numerical Modeling of Superconductors. Dans Applied Superconductivity : Handbook on Devices and Applications (1-104). Lien externe

Kameni, A., Mezani, S., Sirois, F., Netter, D., Leveque, J., & Douine, B. (2010). A 2-D robust FE-FV mixed method to handle strong nonlinearities in superconductors. IEEE Transactions on Magnetics, 46(8), 3445-3448. Lien externe

Kameni, A., Netter, D., Sirois, F., Douine, B., & Leveque, J. (août 2008). New hybrid FE-FV method for computing current distribution in 2-D superconductors: Application to an HTS cylinder in transverse magnetic field [Communication écrite]. 2008 Applied Superconductivity Conference, Chicago, Illinois. Publié dans IEEE Transactions on Applied Superconductivity, 19(3, Part II). Non disponible

L

Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (2023). Performance of painted and non-painted non-woven nickel-coated carbon fibers for lightning strike protection of composite aircraft. Composites Part A: Applied Science and Manufacturing, 175, 107772 (11 pages). Lien externe

Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). A comparative study on the performance of nickel-based technologies for lightning strike protection of composite aircraft [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe

Lacroix, C., Giguère, J., Bergeron Hartman, S.-M., Ben Saad, H., Martin, A., Leduc, T., Gendron-Paul, M., Bellil, Z., Fournier Lupien, J.-H., Moret, L., Barusco, P., Granados, X., Obradors, X., Pekarčíková, M., Gomory, F., Grosse, V., Bauer, M., & Sirois, F. (2022). Normal zone propagation in various REBCO tape architectures. Superconductor Science and Technology, 35(5), 2102034 (12 pages). Disponible

Lacroix, C., Lavergne, O., Leduc, T., Dupuis-Desloges, F., Moret, L., Sirois, F., Escamez, G., Bruzek, C.-É., Tixador, P., Grosse, V., & Bauer, M. (2021). Successful DC current limitation above 100 Vm−1 for 50 ms using HTS tapes with critical currents exceeding 750 A/cm-width. Superconductor Science and Technology, 34(2), 13 pages. Lien externe

Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography. Materialia, 12, 12 pages. Lien externe

Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Internal hydrogen embrittlement of pre-cracked, cadmium-plated AISI 4340 high strength steel with sustained load tests and incremental step-loading tests. Engineering Fracture Mechanics, 223, 106773 (13 pages). Lien externe

Lacroix, C., & Sirois, F. (2019). Impact of Current Flow Diverter on Innovative HTS Tape Architectures for DC Fault Current Limitation at Electric Fields up to 150 V/m. IEEE Transactions on Applied Superconductivity, 29(5), 1-7. Lien externe

Lacroix, C., Sirois, F., & Fournier Lupien, J.-H. (2017). Engineering of 2G HTS coated conductors architecture to enhance the normal zone propagation velocity in various operating conditions. Superconductor Science and Technology, 30(6), 10 pages. Lien externe

Lahtinen, V., Stenvall, A., Sirois, F., & Pellikka, M. (2015). A Finite Element Simulation Tool for Predicting Hysteresis Losses in Superconductors Using an H-Oriented Formulation with Cohomology Basis Functions. Journal of Superconductivity and Novel Magnetism, 28(8), 2345-2354. Lien externe

Lacroix, C., Sirois, F., & Wertheimer, M. R. (2015). Increased normal zone propagation velocity in superconducting segments. (Brevet no US9029296). Lien externe

Lambert, M., Mahseredjian, J., Martinez-Duro, M., & Sirois, F. (2015). Magnetic Circuits Within Electric Circuits: Critical Review of Existing Methods and New Mutator Implementations. IEEE Transactions on Power Delivery, 30(6), 2427-2434. Lien externe

Lacroix, C., & Sirois, F. (2014). Concept of a current flow diverter for accelerating the normal zone propagation velocity in 2G HTS coated conductors. Superconductor Science and Technology, 27(3), 035003-035003. Lien externe

Lacroix, C., Lapierre, Y., Coulombe, J., & Sirois, F. (2014). High normal zone propagation velocity in second generation high-temperature superconductor coated conductors with a current flow diverter architecture. Superconductor Science and Technology, 27(5), 055013-055013. Lien externe

Lambert, M., Martinez-Duro, M., Mahseredjian, J., De Leon, F., & Sirois, F. (2014). Transformer leakage flux models for electromagnetic transients: Critical review and validation of a new model. IEEE Transactions on Power Delivery, 29(5), 2180-2188. Lien externe

Lambert, M., Sirois, F., Martinez-Duro, M., & Mahseredjian, J. (2013). Analytical calculation of leakage inductance for low-frequency transformer modeling. IEEE Transactions on Power Delivery, 28(1), 507-515. Lien externe

Lacroix, C., Sirois, F., Slimani, K., & Cave, J. R. (2013). Electro-thermal response of 2G HTS coated conductors subjected to current pulses. IEEE Transactions on Applied Superconductivity, 23(3), 6601605-6601605. Lien externe

Lacroix, C., Fournier-Lupien, J.-H., McMeekin, K., & Sirois, F. (2013). Normal zone propagation velocity in 2G HTS coated conductor with high interfacial resistance. IEEE Transactions on Applied Superconductivity, 23(3), 4701605-4701605. Lien externe

Lemaire, M.-A., Montealegre Lobo, L., Mahseredjian, J., & Sirois, F. (avril 2011). Simulation of aircraft electrical power systems : tools and challenges [Communication écrite]. CASI-AERO 2011 Conference, Montréal, Québec. Non disponible

M

Messe, C., Riva, N., Viarengo, S., Giard, G., & Sirois, F. (2023). BELFEM : A special purpose finite element code for the magnetodynamic modeling of high-temperature superconducting tapes. Superconductor Science and Technology, 31 pages. Lien externe

Malandra, F., Kizilkale, A. C., Sirois, F., Sanso, B., Anjos, M. F., Bernier, M., Gendreau, M., & Malhamé, R. P. (2020). Smart Distributed Energy Storage Controller (smartDESC). Energy, 210, 10 pages. Lien externe

McMeekin, K., Sirois, F., Tousignant, M., & Bocher, P. (mai 2016). Improving the accuracy of time-harmonic FE simulations in induction heating applications : Towards better ferromagnetic material models [Communication écrite]. International Conference on Heating by Electromagnetic Sources (HES 2016), Padova, Italy. Publié dans International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), 36(2). Lien externe

Meunier, G., Chadebec, O., Guichon, J. M., Vinh, L.-V., Siau, J., Bannwarth, B., & Sirois, F. (2016). A-T Volume Integral Formulations for Solving Electromagnetic Problems in the Frequency Domain. IEEE Transactions on Magnetics, 52(3), 1-4. Lien externe

Morandi, A., Fabbri, M., Gholizad, B., Grilli, F., Sirois, F., & Zermeño, V. M. R. (2016). Design and Comparison of a 1-MW/5-s HTS SMES With Toroidal and Solenoidal Geometry. IEEE Transactions on Applied Superconductivity, 26(4), 1-6. Lien externe

Mikitik, G. P., Mawatari, Y., Wan, A. T. S., & Sirois, F. (2013). Analytical methods and formulas for modeling high temperature superconductors. IEEE Transactions on Applied Superconductivity, 23(2), 8001920-8001920. Lien externe

Michel, L., Boucher, X., Cheriti, A., Sicard, P., & Sirois, F. (2013). FPGA implementation of an optimal IGBT gate driver based on posicast control. IEEE Transactions on Power Electronics, 28(5), 2569-2575. Lien externe

Moffet, M. A., Sirois, F., Joos, G., & Moreau, A. (mai 2012). Central electric thermal storage (ETS) heating systems: Impact on customer and distribution system [Communication écrite]. IEEE PES Transmission and Distribution Conference and Exposition (T and D 2012), Orlando, FL, United states. Lien externe

N

Nguyen, D. N., Ashworth, S. P., Willis, J. O., Sirois, F., & Grilli, F. (2010). A new finite-element method simulation model for computing AC loss in roll assisted biaxially textured substrate YBCO tapes. Superconductor Science and Technology, 23(2), 025001-025001. Lien externe

P

P S M, R., Cauchy, X., Gagne, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (mars 2015). Wet chemical metallization of aerospace composites as a lightning protection strategy [Communication écrite]. TMS 2015 Annual Meeting & Exhibition, Orlando, Florida. Lien externe

Popescu, A., Naggar, R., Sirois, F., & Germain, M. (mai 2008). Modélisation des appareillages électriques dans une base de connaissances dynamique [Communication écrite]. IEEE Canadian Conference on Electrical and Computer Engineering (CCECE 2008), Niagara Falls, ON, Canada. Lien externe

R

Riva, N., Grilli, F., Sirois, F., Lacroix, C., Akbar, A., & Dutoit, B. (2021). Optimization Method for Extracting Stabilizer Geometry and Properties of REBCO Tapes. IEEE Transactions on Applied Superconductivity, 31(5), 1-5. Lien externe

Riva, N., Sirois, F., Lacroix, C., Pellerin, F., Giguere, J., Grilli, F., & Dutoit, B. (2021). A wide range E-J constitutive law for simulating REBCO tapes above their critical current. Superconductor Science and Technology, 34(11), 11 pages. Lien externe

Riva, N., Sirois, F., Lacroix, C., de Sousa, W. T. B., Dutoit, B., & Grilli, F. (2020). Resistivity of REBCO tapes in overcritical current regime: impact on superconducting fault current limiter modeling. Superconductor Science and Technology, 33(11), 114008 (14 pages). Lien externe

Rajesh, P. S. M., Delaroa, C., Gagne, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212. Lien externe

Riva, N., Richard, S., Sirois, F., Lacroix, C., Dutoit, B., & Grilli, F. (2019). Overcritical current resistivity of YBCO-coated conductors through combination of PCM and finite-element analysis. IEEE Transactions on Applied Superconductivity, 29(5), 1-5. Lien externe

Richard, S., Sirois, F., & Lacroix, C. (2019). Post-processing method for extracting the resistivity of Rare-Earth Barium Copper Oxide (REBCO) coated conductors in over-critical current conditions from ultra-fast V-I pulsed current measurements. Journal of Applied Physics, 126(2), 13 pages. Lien externe

Rajesh, P. S. M., Sirois, F., & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Materials and Design, 139, 45-55. Lien externe

Rajesh, P. S. M., Gagne, M., Cauchy, X., Sapieha, J.-E., Sirois, F., & Therriault, D. (juillet 2015). Lightning protection of wet metalized polymer composites [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe

Roy, F., Dutoit, B., & Sirois, F. (2011). Evaluation of the Applicability of Phenomenological HTS Models for Numerical Analysis of Quenches in Coated Conductors: Simulations vs. Experiments. IEEE Transactions on Applied Superconductivity, 21(3), 1190-1193. Lien externe

Roy, F., Dutoit, B., & Sirois, F. (septembre 2009). Quench nucleation obtained by local reduction of Ic in coated conductors [Communication écrite]. 9th European Conference on Applied Superconductivity (EUCAS 2009), Dresden, Germany. Lien externe

Roy, F., Therasse, M., Dutoit, B., Sirois, F., Antognazza, L., & Decroux, M. (août 2008). Numerical Studies of the Quench Propagation in Coated Conductors for Fault Current Limiters [Communication écrite]. 2008 Applied Superconductivity Conference, Chicago, Illinois. Publié dans IEEE Transactions on Applied Superconductivity, 19(3, Part II). Non disponible

Roy, F., Pérez, S., Therasse, M., Dutoit, B., Sirois, F., Decroux, M., & Antognazza, L. (2009). Quench propagation in coated conductors for fault current limiters. Physica C: Superconductivity, 469(15-20), 1462-1466. Lien externe

Roy, F., Dutoit, B., Grilli, F., & Sirois, F. (2008). Magneto-Thermal Modeling of Second-Generation HTS for Resistive Fault Current Limiter Design Purposes. IEEE Transactions on Applied Superconductivity, 18(1), 29-35. Lien externe

Roy, F., Dutoit, B., Grilli, F., & Sirois, F. (septembre 2007). Magneto-thermal finite element modeling of 2nd generation HTS for FCL design purposes [Communication écrite]. 8th European Conference On Applied Superconductivity, Brussels, Belgium. Non disponible

Roy, F., Dutoit, B., Sirois, F., & Grilli, F. (octobre 2007). Magneto-Thermal modeling of 2nd generation HTS wires using COMSOL multiphysics [Communication écrite]. COMSOL Conference 2007, Grenoble France. Non disponible

S

Sirois, F., Grilli, F., & Morandi, A. (2023). Addendum to "Comparison of constitutive laws for modeling high-temperature surperconductors". IEEE Transactions on Applied Superconductivity, 2 pages. Lien externe

Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Desautels, A., Lapalme, M., Sirois, F., & Therriault, D. (2023). Silver-based conductive coatings as lightning strike protection for composite aircraft. Results in Materials, 19, 10 pages. Disponible

Santos, B. M. O., Santos, G. , Sirois, F., Brambilla, R., De Andrade Junior, R., Sass, F., Sotelo, G. G., & Grilli, F. (2022). 2-D Modeling of HTS Coils With T-A Formulation: How to Handle Different Coupling Scenarios. IEEE Transactions on Applied Superconductivity, 32(5), 1-4. Lien externe

Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). Silver-based conductive materials for lightning strike protection of aircraft composite structures [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe

Sosa-Rey, F., Sirois, F., Lacroix, C., & Bonnard, C.-H. (2019). Adaptive multi-scale electrothermal model of REBCO coated conductors embedded in a commercial power system transient simulator. Superconductor Science and Technology, 32(10), 15 pages. Lien externe

Sirois, F., Grilli, F., & Morandi, A. (2019). Comparison of Constitutive Laws for Modeling High-Temperature Superconductors. IEEE Transactions on Applied Superconductivity, 29(1), 1-10. Lien externe

Sirois, F. (2018). Modeling Resistive Superconducting Fault Current Limiters in Power System Transient Simulators. Dans Superconducting Fault Current Limiter (Vol. 03, 117-169). Lien externe

Sirois, F., Bourdel, B., & Malhamé, R. P. (2017). Project RENE-034 : managing energy storage capacities dispersed in an electrical grid to reduce the effects of renewable energy source variability. (Rapport technique). Non disponible

Sass, F., Sotelo, G. G., De Andrade, R. J., & Sirois, F. (2015). H-formulation for simulating levitation forces acting on HTS bulks and stacks of 2G coated conductors. Superconductor Science and Technology, 28(12), 12 pages. Lien externe

Sirois, F., & Grilli, F. (2015). Potential and limits of numerical modelling for supporting the development of HTS devices. Superconductor Science and Technology, 28(4), 043002 (12 pages). Lien externe

Sass, F., Druge, J., Sotelo, G. G., Andrade Jr., R. , & Sirois, F. (septembre 2014). Numerical simulation of superconducting magnetic bearings with H-formulation [Communication écrite]. 22nd International Conference on Magnetically Levitated Systems and Linear Drives (MAGLEV 2014), Rio de Janeiro, Brazil (10 pages). Non disponible

Stenvall, A., Siahrang, M., Grilli, F., & Sirois, F. (2013). Computation of self-field hysteresis losses in conductors with helicoidal structure using a 2D finite element method. Superconductor Science and Technology, 26(4). Lien externe

Siahrang, M., Sirois, F., Nguyen, D. N., & Ashworth, S. P. (2012). Assessment of Alternative Design Schemes to Reduce the Edge Losses in Hts Power Transmission Cables Made of Coated Conductors. Superconductor Science and Technology, 25(1), 8-8. Lien externe

Siahrang, M., & Sirois, F. (2011). Reduction of AC losses in HTS power transmission cables made of coated conductors by overlapping the tapes. Superconductor Science and Technology, 24(1), 015004-015004. Lien externe

Sirois, F., Coulombe, J., Roy, F., & Dutoit, B. (2010). Characterization of the electrical resistance of high temperature superconductor coated conductors at high currents using ultra-fast regulated current pulses. Superconductor Science and Technology, 23(3), 034018-034018. Lien externe

Siahrang, M., Sirois, F., Nguyen, D. N., Babic, S. I., & Ashworth, S. P. (2010). Fast Numerical Computation of Current Distribution and AC Losses in Helically Wound Thin Tape Conductors: Single-Layer Coaxial Arrangement. IEEE Transactions on Applied Superconductivity, 20(6), 2381-2389. Lien externe

Siahrang, M., Sirois, F., Grilli, F., Babic, S. I., & Brault, S. (septembre 2009). A new numerical approach to find current distribution and AC losses in coaxial assembly of twisted HTS tapes in single layer arrangement [Communication écrite]. 9th European Conference on Applied Superconductivity (EUCAS 2009), Dresden, Germany. Publié dans Journal of Physics: Conference Series, 234. Lien externe

Sirois, F., Roy, F., & Dutoit, B. (2009). Assessment of the computational performances of the semi-analytical method (SAM) for computing 2-D current distributions in superconductors. IEEE Transactions on Applied Superconductivity, 19(3), 3600-3604. Lien externe

Sirois, F., Coulombe, J., & Bernier, A. (2009). Characterization of the superconducting to normal transition of HTS coated conductors by fast pulsed current measurements. IEEE Transactions on Applied Superconductivity, 19(3), 3585-3590. Lien externe

Sirois, F., & Grilli, F. (2008). Numerical Considerations About Using Finite-Element Methods to Compute AC Losses in HTS. IEEE Transactions on Applied Superconductivity, 18(3), 1733-1742. Lien externe

Sirois, F., & Roy, F. (2007). Computation of 2-D Current Distribution in Superconductors of Arbitrary Shapes Using a New Semi-Analytical Method. IEEE Transactions on Applied Superconductivity, 17(3), 3836-3845. Lien externe

Sirois, F., Dione, M., Roy, F., Grilli, F., & Dutoit, B. (septembre 2007). Evaluation of two commercial finite element packages for calculating AC losses in 2-D high temperature superconducting strips [Communication écrite]. 8th European Conference On Applied Superconductivity, Brussels, Belgium. Non disponible

Sirois, F., Cave, J. R., & Basile-Bellavance, Y. (2007). Nonlinear Magnetic Diffusion in a Bi2212 Hollow Cylinder: Measurements and Numerical Simulations. IEEE Transactions on Applied Superconductivity, 17(2), 3652-3655. Lien externe

Sirois, F., & Brochu, J. (mai 2006). Reliability Assessment of Reconfigurable Split-Bus Substation Topology for Adding Power Transformers Without Increasing Fault Current [Communication écrite]. Canadian Conference on Electrical and Computer Engineering (CCECE 2006), Ottawa, ON, Canada. Non disponible

Sirois, F., Watson, D. R., Zhu, W., & Cave, J. R. (2002). Development of a numerical method to determine the local E-J Characteristics of anisotropic HTS from experimental V-I curves. Advances in Cryogenic Engineering, 48B, 1118-1125. Non disponible

Sirois, F., Watson, D. R., Zhu, W., & Cave, J. R. (juillet 2001). Development of a numerical method to determine the local E-J characteristics of anisotropic HTS from experimental V-I curves [Communication écrite]. International Cryogenic Materials Conference - ICMC, Madison, Wisconsin (USA). Lien externe

Sirois, F. (2002). Modélisation de la caractéristique E-J des supraconducteurs à haute température critique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

T

Tixador, P. J., Akbar, A., Bauer, M., Bocchi, M., Calleja, A., Creusot, C., Deutscher, G., Gomory, F., Noe, M., Obradors, X., Pekarčíková, M., & Sirois, F. (2022). Some results of the EU project FASTGRID. IEEE Transactions on Applied Superconductivity, 32(4), 1-6. Lien externe

Tousignant, M., Sirois, F., Meunier, G., & Guerin, C. (2019). Incorporation of a vector Preisach-Mayergoyz hysteresis model in 3-D finite element analysis. IEEE Transactions on Magnetics, 55(6), 1-4. Lien externe

Tixador, P., Bauer, M., Bruzek, C.-É., Calleja, A., Deutscher, G., Dutoit, B., Gomory, F., Martini, L., Noe, M., Obradors, X., Pekarčíková, M., & Sirois, F. (2019). Status of the European Union Project FASTGRID. IEEE Transactions on Applied Superconductivity, 29(5), 1-5. Lien externe

Tousignant, M., Sirois, F., & Kedous-Lebouc, A. (novembre 2016). Identification of the Preisach model parameters using only the major hysteresis loop and the initial magnetization curve [Communication écrite]. IEEE Conference on Electromagnetic Field Computation (CEFC 2016), Miami, Florida (1 page). Lien externe

Trillon, A., Sirois, F., Idier, J., & Goussard, Y. (mai 2011). Inversion de données courants de Foucault régularisée basée sur un modèle direct par éléments finis [Communication écrite]. Journées COFREND, Dunkerque, France. Non disponible

Trillon, A., Sirois, F., Idier, J., Goussard, Y., Paul, N., & Girard, A. (mai 2011). Reconstruction tomographique par courants de Foucault avec modèle direct éléments finis et régularisation additive [Communication écrite]. Journées COFREND, Dunkerque, France. Non disponible

Trillon, A., Girard, A., Idier, J., Goussard, Y., Sirois, F., Dubost, S., & Paul, N. (juillet 2009). Eddy current tomography based on a finite difference forward model with additive regularization [Communication écrite]. Review of Quantitative Nondestructive Evaluation Conference, Kingston, Rhode Island. Lien externe

Trillon, A., Paul, N., Girard, A., Sirois, F., Goussard, Y., & Idier, J. (juin 2010). Regularized eddy current tomographic reconstruction based on finite element forward model [Communication écrite]. 10th European conference on Non-Destructive Testing (ECNDT 2010), Moscow, Russia. Non disponible

V

Venne, P., Guillot, X., & Sirois, F. (octobre 2007). Testing power system controllers by real-time simulation [Communication écrite]. Large Engineering Systems Conferenc eon Power Engineering (IEEE LESCOPE 2007), Montréal, Québec. Lien externe

W

Watson, S., Nisol, B., Gagnon, H., Archambault-Caron, M., Sirois, F., & Wertheimer, M. R. (2019). Energetics of Noble Gas Dielectric Barrier Discharges: Novel Results Related to Electrode Areas and Dielectric Materials. IEEE Transactions on Plasma Science, 47(5), 2680-2688. Lien externe

Watson, D. R., Sirois, F., Zhu, W., & Cave, J. R. (2000). Modelling of current transfer and self field effects in composite HTS conductors. Advances in Cryogenic Engineering, 46B, 535-542. Non disponible

Y

Youmssi, A., Kayem, J., Sirois, F., & Ngouadjo, L. T. (2013). Liquid foods treatments by PEF - A deep analysis owing to electromagnetic theory. International Journal of Applied Science and Engineering Research, 2(3), 346-360. Non disponible

Youmssi, A., Kayem, G. J., Sirois, F., Olivier, G., Arfa, K., & Ngouadjo, L. (mai 2010). A controlled high pulsed electric field generator for non-thermal tropical liquid food processings [Communication écrite]. IEEE International Power Modulator and High Voltage Conference, Atlanta, GA, USA. Non disponible

Youmssi, A., Kayem, G. J., Sirois, F., Olivier, G., Arfa, K., & Ngouadjo, L. (juin 2010). Modelisation of pulsed electric fields for tropical liquid food industrial processing [Communication écrite]. 17th World Congress of the International Commission of Agricultural and Biosystems Engineering, Québec. Lien externe

Youmssi, A., Kayem, G. J., Sirois, F., Olivier, G., Arfa, K., & Ngouadjo, L. (mai 2010). Sterilisation of liquid food by pulsed high voltages and analysis owing to distribution theory [Communication écrite]. IEEE International Power Modulator and High Voltage Conference, Atlanta, GA, USA. Non disponible

Z

Zagbayou, B., Doiron, E., Sirois, F., Seifert, T., Kampfrath, T., & Seletskiy, D. (septembre 2023). Shot-noise limited detection of terahertz transients form spintronic emitters [Communication écrite]. 48th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2023), Montreal, Qc, Canada (1 page). Lien externe

Zampa, A., Lacroix, C., Badel, A., Sirois, F., & Tixador, P. (2022). Current redistribution during inhomogeneous quench of 2G HTS tapes. Superconductor Science and Technology, 35(9), 11 pages. Lien externe

Zermeño, V., Sirois, F., Takayasu, M., Vojenciak, M., Kario, A., & Grilli, F. (2015). A self-consistent model for estimating the critical current of superconducting devices. Superconductor Science and Technology, 28(8), 085004 (12 pages). Lien externe

Zermeno, V. M. R., Grilli, F., & Sirois, F. (2013). A full 3D time-dependent electromagnetic model for Roebel cables. Superconductor Science and Technology, 26(5). Lien externe

Liste produite: Fri Mar 29 04:28:22 2024 EDT.