Documents dont l'auteur est "Cloutier, Guy"
Monter d'un niveau
Aide
Ce graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Aide
Un nuage de mots est une représentation visuelle des mots les plus fréquemment utilisés dans un texte ou un ensemble de textes. Les mots apparaissent dans différentes tailles, la taille de chaque mot étant proportionnelle à sa fréquence d'apparition dans le texte. Plus un mot est utilisé fréquemment, plus il apparaît en grand dans le nuage de mots. Cette technique permet de visualiser rapidement les thèmes et les concepts les plus importants d'un texte.
Dans le contexte de cette page, le nuage de mots a été généré à partir des publications de l'auteur {}. Les mots présents dans ce nuage proviennent des titres, résumés et mots-clés des articles et travaux de recherche de cet auteur. En analysant ce nuage de mots, vous pouvez obtenir un aperçu des sujets et des domaines de recherche les plus récurrents et significatifs dans les travaux de cet auteur.Le nuage de mots est un outil utile pour identifier les tendances et les thèmes principaux dans un corpus de textes, facilitant ainsi la compréhension et l'analyse des contenus de manière visuelle et intuitive.
Article de revue
Li, H., Porée, J., Chayer, B., Cardinal, M.-H. R., & Cloutier, G. (2020). Parameterized Strain Estimation for Vascular Ultrasound Elastography With Sparse Representation. IEEE Transactions on Medical Imaging, 39(12), 3788-3800. Lien externe
Garcia-Duitama, J., Chayer, B., Garcia, D., Goussard, Y., & Cloutier, G. (2017). Protocol for Robust In Vivo Measurements of Erythrocyte Aggregation Using Ultrasound Spectroscopy. Ultrasound in Medicine & Biology, 43(12), 2871-2881. Lien externe
Grasland-Mongrain, P., Yuankang, L., Lesage, F., Catheline, S., & Cloutier, G. (2016). Generation of shear waves by laser in soft media in the ablative and thermoelastic regimes. Applied Physics Letters, 109(22), 5 pages. Lien externe
Majdouline, Y., Ohayon, J., Keshavarz-Motamed, Z., Roy Cardinal, M.-H., Garcia, D., Allard, L., Lerouge, S., Arsenault, F., Soulez, G., & Cloutier, G. (2014). Endovascular shear strain elastography for the detection and characterization of the severity of atherosclerotic plaques: In vitro validation and in vivo evaluation. Ultrasound in Medicine and Biology, 40(5), 890-903. Lien externe
Abran, M., Cloutier, G., Cardinal, M.-H. R., Chayer, B., Tardif, J.-C., & Lesage, F. (2014). Development of a Photoacoustic, Ultrasound and Fluorescence Imaging Catheter for the Study of Atherosclerotic Plaque. IEEE Transactions on Biomedical Circuits and Systems, 8(5), 696-703. Lien externe
Cloutier, G., Hugo, R., & Sellens, R. (2012). Mapping the Relationship Between the CDIO Syllabus and the CEAB Graduate Attributes. International Journal of Quality Assurance in Engineering and Technology Education, 2(2), 34-44. Lien externe
Slamani, M., Mayer, J. R. R., & Cloutier, G. (2011). Modeling and experimental validation of machine tool motion errors using degree optimized polynomial including motion hysteresis. Experimental Techniques, 35(1), 37-44. Lien externe
Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe
Hamelin, B., Goussard, Y., Dussault, J.-P., Cloutier, G., Beaudoin, G., & Soulez, G. (2010). Design of iterative ROI transmission tomography reconstruction procedures and image quality analysis. Medical Physics, 37(9), 4577-4589. Lien externe
Onat Ekinci, T., Mayer, J. R. R., & Cloutier, G. (2009). Investigation of accuracy of aerostatic guideways. International Journal of Machine Tools and Manufacture, 49(6), 478-487. Lien externe
Wang, X., Baron, L., & Cloutier, G. (2008). Topological and Geometrical Synthesis of Three-Degree-of-Freedom Fully Parallel Manipulators by Instantaneous Kinematics. Journal of Mechanical Design, 130(3), 032301 (8 pages). Lien externe
Wang, X., Baron, L., & Cloutier, G. (2008). Topology of Serial and Parallel Manipulators and Topological Diagrams. Mechanism and Machine Theory, 43(6), 754-770. Lien externe
Perron, J., Corbière, M., Coallier, J. C., & Cloutier, G. (2006). The School-to-Work Transition: a Multitheoretical and Longitudinal Model. Psychologie du travail et des organisations, 12(3), 211-224. Lien externe
Genevès, C., Wilquem, F., Treyve, F., Cloutier, G., Soulez, G., & Saidane, K. (2005). Study of non stationary mode flow of an abdominal aortic aneurysm. Journal of Applied Biomaterials and Biomechanics, 3(3), 176-183. Lien externe
Maurice, R. L., Ohayon, J., Frétigny, Y., Bertrand, M., Soulez, G., & Cloutier, G. (2004). Noninvasive Vascular Elastography: Theoretical Framework. IEEE Transactions on Medical Imaging, 23(2), 164-180. Lien externe
Phan, A. V., Baron, L., Mayer, J. R. R., & Cloutier, G. (2003). Finite Element and Experimental Studies of Diametral Errors in Cantilever Bar Turning. Applied Mathematical Modelling, 27(3), 221-232. Lien externe
Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797. Lien externe
Benea, R., Fortin, C., & Cloutier, G. (2002). Analyse de tolérances en fabrication tenant compte des dispersions de procédés et des erreurs machines-outils : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 39-59. Lien externe
Brunette, J., Mongrain, R., Cloutier, G., Bertrand, M., Bertrand, O. F., & Tardif, J.-C. (2001). A Novel Realistic Three-Layer Phantom for Intravascular Ultrasound Imaging. International Journal of Cardiovascular Imaging, 17(5), 371-381. Lien externe
Mayer, J. R. R., Phan, A. V., & Cloutier, G. (2000). Prediction of Diameter Errors in Bar Turning: a Computationally Effective Model. Applied Mathematical Modelling, 24(12), 943-956. Lien externe
Phan, A. V., Cloutier, G., & Mayer, J. R. R. (1999). Finite element model for predicting tapered workpiece deflections in turning. Computer modeling and simulation in engineering, 4(2), 138-142. Non disponible
Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (1999). A Finite-Element Model With Closed-Form Solutions to Workpiece Deflections in Turning. International Journal of Production Research, 37(17), 4039-4051. Lien externe
Fontaine, I., Bertrand, M., & Cloutier, G. (1999). A System-Based Approach to Modeling the Ultrasound Signal Backscattered by Red Blood Cells. Biophysical Journal, 77(5), 2387-2399. Lien externe
Cloutier, G., Mayer, J. R. R., & Phan, A.-V. (1999). Singularity function representation in obtaining closed-form solutions to workpiece deflections in turning multi-diameter bars. Computer modeling and simulation in engineering, 4(2), 133-137. Non disponible
Cloutier, G., & Gourdeau, R. (1998). Task Constraints Specification Via Optimized Hyperellipsoids. International Journal of Robotics Research, 17(3), 294-304. Lien externe
Mayer, J. R. R., Cloutier, G., & Fortin, C. (1997). Quadrilateration and measurement site identification with dual scanning axis laser tracking interferometers. Measurement: Journal of the International Measurement Confederation, 20(3), 171-187. Lien externe
Gourdeau, R., Cloutier, G., & Laflamme, J. (1996). Parameter identification of a semi-flexible kinematic model for serial manipulators. Robotica, 14(3), 311-319. Lien externe
Cloutier, G., Gourdeau, R., & St-Arneault, C. (1996). Dual conformance index-based robotic arm placement and adaptation. Journal of Robotic Systems, 13(4), 187-202. Lien externe
Cléroux, L., Gourdeau, R., & Cloutier, G. (1995). Semi-flexible kinematic model for serial manipulators. Robotica, 13(4), 385-395. Lien externe
Cloutier, G., Jutard, A., & Bétemps, M. (1994). Robot-task conformance index for the design of robotized cells. Robotics and Autonomous Systems, 13(4), 233-243. Lien externe
Cloutier, G., & Bétemps, M. (1990). "Tabulation of the Symbolic Midframe Jacobian of a Robot Manipulator" by Keith L. Doty. The International Journal of Robotics Research, 9(1), 145-146. Lien externe
Cloutier, G., Durand, L.-G., Guardo, R., Sabbah, H. N., & Stein, P. D. (1989). Bias and variability of diagnostic spectral parameters extracted from closing sounds produced by bioprosthetic valves implanted in the mitral position. IEEE Transactions on Biomedical Engineering, 36(8), 815-825. Lien externe
Cloutier, G., Guardo, R., & Durand, L.-G. (1987). Spectral analysis of closing sounds produced by lonescu-Shiley bioprosthetic aortic heart valves : Part 1. Medical & Biological Engineering & Computing, 25(5), 487-491. Lien externe
Cloutier, G., Grenier Richer, M.-C., Guardo, R., & Durand, L.-G. (1987). Spectral analysis of closing sounds produced by lonescu-Shiley bioprosthetic aortic heart valves : Part 2. Medical & Biological Engineering & Computing, 25(5), 492-496. Lien externe
Cloutier, G., Guardo, R., & Durand, L.-G. (1987). Spectral analysis of closing sounds produced by lonescu-Shiley bioprosthetic aortic heart valves : Part 3. Medical & Biological Engineering & Computing, 25(5), 497-503. Lien externe
Durand, L.-G., De Guise, J., Cloutier, G., Guardo, R., & Brais, M. (1986). Evaluation of FFT-Based and Modern Parametric Methods for the Spectral Analysis of Bioprosthetic Valve Sounds. IEEE Transactions on Biomedical Engineering, BME-33(6), 572-578. Lien externe
Rapport technique
Cloutier, G., & Smith, B. T. (1986). Opportunity cost evaluation with a price change anticipation. (Rapport technique n° EPM-RT-86-50). Accès restreint
Communication écrite
Montagnon, E., Hissoiny, S., Després, P., & Cloutier, G. (juillet 2012). Real-time processing in dynamic ultrasound elastography: a GPU-based implementation using CUDA [Communication écrite]. 2012 11th International Conference on Information Sciences, Signal Processing and their Applications (ISSPA), Piscataway, NJ, USA. Lien externe
Cloutier, G., Savard, P., & Boudreault, Y. (juin 2011). Towards a scale and tool for the appraisal of CEAB attributes - Progress report on a field test [Communication écrite]. 2nd Annual CEEA Conference, Memorial University St. John's, Newfoundland (6 pages). Publié dans Proceedings of the ... CEEA Conference. Lien externe
Cloutier, G., Sellens, R. W., Hugo, R. J., Camarero, R., & Fortin, C. (juin 2010). Outcomes Assessment and Curriculum Improvement Through the Cyclical Review of Results - A Model to Satisfy CEAB-2009 Accreditation Requirements [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, 2010, Queen's University Kingston, Ontario (6 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible
Hamelin, B., Goussard, Y., Gendron, D., Dussault, J.-P., Cloutier, G., Beaudoin, G., & Soulez, G. (mai 2008). Iterative CT reconstruction of real data with metal artifact reduction [Communication écrite]. IEEE International Symposium on Biomedical Imaging: From Macro to Nano (ISBI '08), Paris, France. Lien externe
Gendron, D., Goussard, Y., Beaudoin, G., Soulez, G., & Cloutier, G. (août 2008). Reconstruction of real tomographic data using algebraic methods [Communication écrite]. 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2008, Vancouver, BC, Canada. Lien externe
Chayer, B., De Guise, J. A., & Cloutier, G. (mai 2008). Effect of depth of correlation on cross-correlation blood flow measurements in glass microchannels [Communication écrite]. 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro, Paris, France (4 pages). Lien externe
Schmitt, C., Henni, A. H., & Cloutier, G. (novembre 2008). Dynamic micro-elastography applied to the viscoelastic characterization of a mimicking artery and a porcine aorta [Communication écrite]. IEEE Ultrasonics Symposium, Beijing, China (4 pages). Lien externe
Ekinci, T. O., Mayer, J. R. R., & Cloutier, G. (mai 2023). Thermal Distortion Modeling on CMM Structures [Communication écrite]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec. Non disponible
Wang, X., Baron, L., & Cloutier, G. The Design of Parallel Manipulators of Delta Topology Under Isotropic Constraints [Communication écrite]. 11th World Congress in Mechanism and Machine Science. Non disponible
Dupont, Y., Cloutier, G., & Mayer, J. R. R. Identification Method for Scale, Pitch and Yaw Deviations With Linear Measurements [Communication écrite]. Laser Metrology and Machine Performance VI. Non disponible
Wang, X., Baron, L., & Cloutier, G. (juin 2003). Kinematic modelling and isotropic conditions of a family of translational parallel manipulators [Communication écrite]. 4th International Conference on Control and Automation (ICCA 2003), Montréal, QC, Canada. Lien externe
Baron, L., Wang, X., & Cloutier, G. (janvier 2002). Isotropic conditions of parallel manipulators of delta topology [Communication écrite]. Advances in Robot Kinematics: Theory and Applications, Clades de Malavella, Espagne. Lien externe
Benea, R., Cloutier, G., & Fortin, C. (avril 2001). Process Plan Validation Including Process Deviations and Machine-tool Errors [Communication écrite]. 7th CIRP International Seminar on Computer Aided Tolerancing, Cachan, France. Non disponible
Cloutier, G., Mayer, J. R. R., & Aussel, W. (janvier 2000). Study of the co-calibration of the scale error of a prismatic joint and of a step gauge by shearing of reversal techniques [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec. Non disponible
Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (janvier 1999). Investigation into diametral error modeling in bar turning [Communication écrite]. NSF Grantees Conference, Los Angeles, USA. Non disponible
Gaudette, P., Cloutier, G., & Fortin, C. (janvier 1999). Validation of a process plan by propagated dispersion zones [Communication écrite]. 6th CIRP International Seminar on Computer-Aided Tolerancing, Netherlands. Non disponible
Mayer, J. R. R., Andrian, R., Fortin, C., & Cloutier, G. (janvier 1998). Machine tool capability diagnostic by touch probing [Communication écrite]. CSME Forum, Toronto, Canada. Non disponible
Mayer, J. R. R., Andrian, R., Cloutier, G., & Fortin, C. (janvier 1998). Artefact probing for machine tool and process diagnosis [Communication écrite]. 13th Annual Meeting American Society for Precision Engineering, St-Louis, Missouri. Non disponible
Mayer, J. R. R., Andrian, R., Fortin, C., Cloutier, G., & Luong, T. (juillet 1997). Performance verification and monitoring of nc machine-tools for in-process part measurement by touch probing [Communication écrite]. 32nd International MATADOR Conference, Manchester, UK. Lien externe
Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (juillet 1997). Interactive computer aided process planning system for manufacturing, assembly and inspection [Communication écrite]. 32nd International MATADOR Conference, Manchester, U.K.. Lien externe
Cloutier, G., Gourdeau, R., & Laflamme, J. (janvier 1997). Improving the accuracy of industrial robots using a semi-flexible kinematic model: experimental results [Communication écrite]. Forum de la Société canadienne de génie mécanique, Toronto, Canada. Non disponible
Cloutier, G., & Shung, K. K. (octobre 1992). The effect of turbulence on the variation of the ultrasonic Doppler amplitude within the cardiac cycle [Communication écrite]. 14th annual International Conference of the IEEE Engineering in Medicine and Biology Society, Paris, France (2 pages). Lien externe
Cloutier, G., Allard, L., Guo, Z., & Durand, L.-G. (novembre 1990). The Effect Of Averaging Cardiac Doppler Spectrograms On Their Amplitude Variability [Communication écrite]. 12th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 1990), Philadelphia, PA, USA. Lien externe
Cloutier, G., & Paques, J.-J. (octobre 1988). GEMMA, the complementary tool of the GRAFCET [Communication écrite]. Programmable Control and Automation Technology Conference and Exhibition (PROCCE 1988), Toronto, ON, Canada. Lien externe
Chapitre de livre
Benea, R., Cloutier, G., & Fortin, C. (2003). Process Plan Validation Including Process Deviations and Machine-Tool Errors. Dans Geometric Product Specification and Verification: Integration of Functionality (p. 197-206). Lien externe