<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Reggio, Marcelo"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Nombre de documents: 124

Article de revue

Ho, M., Ammar, S., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2022). Comparative study of multicomponent Lattice Boltzmann models for binary mixture flows. International Journal of Modern Physics C, 33(03), 2250034 (24 pages). Lien externe

Ho, M., Ammar, S., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2022). Lattice Boltzmann Modeling of Miscible Multicomponent Gas Mixtures in the Rarefied Regime. Communications in Computational Physics, 32(4), 1179-1216. Lien externe

Pellerin, N., Leclaire, S., & Reggio, M. (2021). An interpolation-based lattice Boltzmann method for non-conforming orthogonal meshes. Computers and Mathematics with Applications, 100, 152-166. Lien externe

Garcia Perez, J., Leclaire, S., Ammar, S., Trépanier, J.-Y., Reggio, M., & Benmeddour, A. (2021). Investigations of water droplet impact and freezing on a cold substrate with the Lattice Boltzmann method. International Journal of Thermofluids, 12, 10 pages. Lien externe

Ho, M., Leclaire, S., Trépanier, J.-Y., Reggio, M., & Martin, A. (2021). Permeability calculation of a fibrous thermal insulator using the lattice boltzmann method. Journal of Thermophysics and Heat Transfer, 35(1), 206-209. Lien externe

Ho, M., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2021). Stochastic Effects of 2D Random Arrays of Cylinders on Rarefied Gas Permeability Using the Lattice Boltzmann Method. Transport in Porous Media, 136(2), 607-637. Lien externe

Bahloul, A., Djebara, A., Saidi, M. N., Songmene, V., Villalpando, F., & Reggio, M. (2019). Computational and Experimental Analysis of Ultrafine Particle Dispersion During Granite Polishing. Aerosol Science and Engineering, 3(1), 21-31. Lien externe

Ho, M., Perez, J. G., Reggio, M., & Trépanier, J.-Y. (2019). Permeability calculation of rarefied gas flows through 2D porous structures using the lattice Boltzmann method. Physics and Chemistry of the Earth, Parts A/B/C, 113, 43-49. Lien externe

Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification, Part I: Convergence rate loss diagnosis. Mathematics and Computers in Simulation, 147, 152-171. Lien externe

Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification. Part II: Boundary condition non-orthogonal correction. Mathematics and Computers in Simulation, 147, 172-193. Lien externe

Bennacer, R., Reggio, M., Pellerin, N., & Ma, X. (2017). Differentiated heated lid driven cavity interacting with tube: a lattice Boltzmann study. Thermal Science, 21(1A), 89-104. Disponible

Pellerin, N., Leclaire, S., & Reggio, M. (2017). Solving incompressible fluid flows on unstructured meshes with the lattice Boltzmann flux solver. Engineering Applications of Computational Fluid Mechanics, 11(1), 310-327. Lien externe

Ma, X., Pellerin, N., Reggio, M., & Bennacer, R. (2017). Study on an antagonist differentiated heated lid driven-cavity enclosing a tube: Lattice Boltzmann method. EPJ Applied Physics, 78(3), 10 pages. Lien externe

Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2016). A multiphase lattice Boltzmann method for simulating immiscible liquid-liquid interface dynamics. Applied Mathematical Modelling, 40(13-14), 6376-6394. Lien externe

Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016). A numerical study of Francis turbine operation at no-load condition. Journal of Fluids Engineering, 139(1), 60 pages. Lien externe

Villalpando, F., Reggio, M., & Ilinca, A. (2016). Prediction of ice accretion and anti-icing heating power on wind turbine blades using standard commercial software. Energy, 114, 1041-1052. Lien externe

Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2015). An approach to control the spurious currents in a multiphase lattice Boltzmann method and to improve the implementation of initial condition. International Journal for Numerical Methods in Fluids, 77(12), 732-746. Lien externe

Pellerin, N., Leclaire, S., & Reggio, M. (2015). An implementation of the Spalart-Allmaras turbulence model in a multi-domain lattice Boltzmann method for solving turbulent airfoil flows. Computers & Mathematics With Applications, 70(12), 3001-3018. Lien externe

Galvan, S., Reggio, M., & Guibault, F. (2015). Numerical optimization of the inlet velocity profile ingested by the conical draft tube of a hydraulic turbine. Journal of Fluids Engineering, Transactions of the ASME, 137(7). Lien externe

Galvan, S., Reggio, M., Guibault, F., & Solorio, G. (2015). Quantitative and qualitative analysis of the flow field development through T99 draft tube caused by optimized inlet velocity profiles. International Journal of Fluid Machinery and Systems, 8(4), 283-293. Lien externe

Galván, S., Reggio, M., & Guibault, F. (2014). Assessment Study of K-ɛ Turbulence Models and Near-Wall Modeling for Steady State Swirling Flow Analysis in Draft Tube UsingFluent. Engineering Applications of Computational Fluid Mechanics, 5(4), 459-478. Lien externe

Pellerin, N., Leclaire, S., & Reggio, M. (2014). Equilibrium distributions for straight, curved, and immersed boundary conditions in the lattice Boltzmann method. Computers and Fluids, 101, 126-135. Lien externe

Leclaire, S., El-Hachem, M., Trépanier, J.-Y., & Reggio, M. (2014). High Order Spatial Generalization of 2D and 3D Isotropic Discrete Gradient Operators with Fast Evaluation on GPUs. Journal of Scientific Computing, 59(3), 545-573. Lien externe

Teyssedou, A., Necciari, R., Reggio, M., Zadeh, F. M., & Étienne, S. (2014). Moderator Flow Simulation Around Calandria Tubes of Candu-6 Nuclear Reactors. Engineering Applications of Computational Fluid Mechanics, 8(1), 178-192. Lien externe

Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2014). Multiphase flow modeling of spinodal decomposition based on the cascaded lattice Boltzmann method. Physica A: Statistical Mechanics and its Applications, 406, 307-319. Lien externe

Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2014). Unsteady immiscible multiphase flow validation of a multiple-relaxation-time lattice Boltzmann method. Journal of Physics A: Mathematical and Theoretical, 47(10), 24-24. Lien externe

Sagol, E., Reggio, M., & Ilinca, A. (2013). Issues concerning roughness on wind turbine blades. Renewable & Sustainable Energy Reviews, 23, 514-525. Lien externe

Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2013). Enhanced equilibrium distribution functions for simulating immiscible multiphase flows with variable density ratios in a class of lattice Boltzmann models. International Journal of Multiphase Flow, 57, 159-168. Lien externe

Noriega, H., Reggio, M., & Vasseur, P. (2013). Natural convection of nanofluids in a square cavity heated from below. Computational Thermal Sciences, 5(4), 289-301. Lien externe

Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2013). Progress and Investigation on Lattice Boltzmann Modeling of Multiple Immiscible Fluids or Components With Variable Density and Viscosity Ratios. Journal of Computational Physics, 246, 318-342. Lien externe

Guiet, J., Reggio, M., & Vasseur, P. (2012). Natural convection of nanofluids in a square enclosure with protruding heater. Advances in Mechanical Engineering, 2012, 167296 (11 pages). Disponible

Alloui, Z., Vasseur, P., & Reggio, M. (2012). Analytical and Numerical Study of Buoyancy-Driven Convection in a Vertical Enclosure Filled With Nanofluids. Lien externe

Sagol, E., Reggio, M., & Ilinca, A. (2012). Assessment of Two-Equation Turbulence Models and Validation of the Performance Characteristics of an Experimental Wind Turbine by CFD. ISRN Mechanical Engineering, 2012, 10-10. Lien externe

Alloui, Z., Guiet, J., Vasseur, P., & Reggio, M. (2012). Natural Convection of Nanofluids in a Shallow Rectangular Enclosure Heated From the Side. Canadian Journal of Chemical Engineering, 90(1), 69-78. Lien externe

Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2012). Numerical Evaluation of Two Recoloring Operators for an Immiscible Two-Phase Flow Lattice Boltzmann Model. Applied Mathematical Modelling, 36(5), 2237-2252. Lien externe

Villalpando, F., Reggio, M., & Ilinca, A. (2012). Numerical Study of Flow Around Iced Wind Turbine Airfoil. Engineering Applications of Computational Fluid Mechanics, 6(1), 39-45. Lien externe

Villalpando, F., Reggio, M., & Ilinca, A. (2011). Assessment of turbulence models for flow simulation around a wind turbine airfoil. Modelling and Simulation in Engineering, 2011, 1-8. Disponible

Castro, L., Urquiza, G., Adamkowski, A., & Reggio, M. (2011). Experimental and numerical simulations predictions comparison of power and efficiency in hydraulic turbine. Modelling and Simulation in Engineering, 2011, 1-8. Disponible

Guiet, J., Reggio, M., & Teyssedou, A. (2011). Implementation and application of the lattice Boltzmann method using Matlab. Engineering Applications of Computational Fluid Mechanics, 5(1), 117-126. Lien externe

Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2011). Isotropic color gradient for simulating very high-density ratios with a two-phase flow lattice Boltzmann model. Computers and Fluids, 48(1), 98-112. Lien externe

Alloui, Z., Vasseur, P., & Reggio, M. (2011). Natural convection of nanofluids in a shallow cavity heated from below. International Journal of Thermal Sciences, 50(3), 385-393. Lien externe

Guiet, J., Reggio, M., & Vasseur, P. (2011). Natural convection of nanofluids in heated enclosures using the lattice Boltzmann method. Computational Thermal Sciences, 3(4), 301-316. Lien externe

Martin, A., Reggio, M., & Trépanier, J.-Y. (2008). Numerical Solution of Axisymmetric Multi-Species Compressible Gas Flow: Towards Improved Circuit Breaker Simulation. International Journal of Computational Fluid Dynamics, 22(4), 259-271. Lien externe

Abanto, J., Reggio, M., Barrero, D., & Petro, E. (2007). Prediction of Fire and Smoke Propagation in an Underwater Tunnel. Tunnelling and Underground Space Technology, 22(1), 90-95. Lien externe

Martin, A., Trépanier, J.-Y., Reggio, M., & Guo, X. Y. (2007). Transient Ablation Regime in Circuit Breakers. Plasma Science & Technology, 9(6), 653-656. Lien externe

Abanto, J., & Reggio, M. (2006). Numerical investigation of the flow in a kitchen hood system. Building and Environment, 41(3), 288-296. Lien externe

Abanto, J., Reggio, M., & Painchaud-Ouellet, S. (2006). On the Design of the RTO Unit Using CFD. Applied Thermal Engineering, 26(17-18), 2327-2335. Lien externe

Reggio, M., Hess, A., & Ilinca, A. (2002). 3-D Multiple-Level Simulation of Free Surface Flows. Journal of Hydraulic Research, 40(4), 413-423. Lien externe

Reggio, M., McKenty, F., Gravel, L., Cortes, J., Morales, G., & Ladron de Guevara, M.-A. (2002). Computational analysis of the process for manufacturing seamless tubes. Applied Thermal Engineering, 22(4), 459-470. Lien externe

Maruzewski, P., Martin, A., Reggio, M., & Trépanier, J.-Y. (2002). Simulation of Arc-Electrode Interaction Using Sheath Modelling in SF₆ Circuit-Breakers. Journal of Physics D: Applied Physics, 35(9), 891-899. Lien externe

Reggio, M., & Godin, D. (2001). Generalized Taylor Splines. International Journal of Computer Mathematics, 78(4), 551-568. Lien externe

Godin, D., Trépanier, J.-Y., Reggio, M., Zhang, X. D., & Camarero, R. (2000). Modelling and Simulation of Nozzle Ablation in High-Voltage Circuit-Breakers. Journal of Physics D: Applied Physics, 33(20), 2583-2590. Lien externe

Reggio, M., & Godin, D. (2000). Taylor's Magic Splines. International Journal of Computer Mathematics, 75(4), 465-480. Lien externe

Rida, S., McKenty, F., Meng, F. L., & Reggio, M. (1997). Staggered control volume scheme for unstructured triangular grids. International Journal for Numerical Methods in Fluids, 25(6), 697-717. Lien externe

Trépanier, J.-Y., Paraschivoiu, M., Reggio, M., & Camarero, R. (1996). A conservative shock fitting method on unstructured grids. Journal of Computational Physics, 126(2), 421-433. Lien externe

Ilinca, A., Camarero, R., Trépanier, J.-Y., & Reggio, M. (1995). Error estimator and adaptive moving grids for finite volumes schemes. AIAA Journal, 33(11), 2058-2065. Lien externe

Elkaïm, D., McKenty, F., Reggio, M., & Camarero, R. (1994). Control-volume finite-element solution of confined turbulent swirling flows. International Journal for Numerical Methods in Fluids, 19(2), 135-152. Lien externe

Zhang, X. D., Trépanier, J.-Y., Reggio, M., & Camarero, R. (1994). Time-accurate local time stepping method based on flux updating. AIAA Journal, 32(9), 1926-1929. Lien externe

Reggio, M., Trépanie, J.-Y., & Camarero, R. (1990). A composite grid approach for the Euler equations. International Journal for Numerical Methods in Fluids, 10(2), 161-178. Lien externe

Reggio, M., Agouzoul, M., & Camarero, R. (1987). Computation of incompressible turbulent flows by an opposed-differencing scheme. Numerical Heat Transfer, 12(3), 307-320. Lien externe

Reggio, M., & Camarero, R. (1986). Numerical solution procedure for viscous incompressible flows. Numerical heat transfer, 10(2), 131-146. Lien externe

Rapport technique

Garcia Perez, J., Trépanier, J.-Y., Leclaire, S., Reggio, M., & Benmeddour, A. (2020). Lattice Boltzmann approach for the modeling and simulation of water droplets impact and freezing. (Rapport technique). Non disponible

Bahloul, A., Jorge, R. F. V., Djebara, A., Songmene, V., Saidi, M. N., Kouam, J., Reggio, M., & Villalpando, F. (2019). Transformation du granit : caractérisation et contrôle de la poussière de la silice émise par le polissage. (Rapport technique n° R-1054). Lien externe

Bahloul, A., Roberge, B., Goyer, N., Chavez, M., & Reggio, M. (2010). La prévention des intoxications dans les silos à fourrage. (Rapport technique n° R-672). Lien externe

Agouzoul, M., Camarero, R., & Reggio, M. (1988). Résolution numérique des écoulements tridimensionnels turbulents. (Rapport technique n° EPM-RT-88-37). Disponible

Agouzoul, M., Reggio, M., & Camarero, R. (1986). A Numerical study of turbulent flow using a nonstaggered mesh. (Rapport technique n° EPM-RT-86-44). Disponible

Reggio, M., & Camarero, R. (1986). An Opposed differencing scheme for solving the incompressible navier-stokes equations. (Rapport technique n° EPM-RT-86-43). Disponible

Reggio, M., & Camarero, R. (1985). A calculation procedure for three-dimensional incompressible flows. (Rapport technique n° EPM-RT-85-12). Disponible

Reggio, M., Camarero, R., & Vu, T. C. (1985). Numerical predictions in turbomachinery analysis. (Rapport technique n° EPM-RT-85-07). Disponible

Communication écrite

Ho, M., Seif, M., McDaniel, S., Leclaire, S., Reggio, M., Trépanier, J.-Y., Beck, M., & Martin, A. (janvier 2021). Fluid behavior in stochastic porous structures [Communication écrite]. 2021 AIAA Scitech Forum. Lien externe

Kidikian, J., Badrieh, C., & Reggio, M. (juin 2021). Mathematical model to describe double circular arc and multiple circular ARC compressor blading profiles [Communication écrite]. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition (GT 2021) (9 pages). Lien externe

Kidikian, J., & Reggio, M. (juin 2018). Off-design prediction of transonic axial compressors, Part 1: Mean-line code and tuning factors [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (16 pages). Lien externe

Kidikian, J., & Reggio, M. (juin 2018). Off-design prediction of transonic axial compressors, Part 2 : Generalized mean-line loss modelling methodology [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (16 pages). Lien externe

Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (juillet 2016). Unsteady simulation for Francis Turbine during load rejection events [Communication écrite]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2016), Washington, DC, United states (10 pages). Lien externe

Facci, A. L., Reggio, M., & Ubertini, S. (septembre 2014). Three Dimensional Numerical Simulation of Water Entry Problem [Communication écrite]. International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2014), Rhodes, Greece. Lien externe

Galvan, S., Reggio, M., Guibault, F., & Castro, L. (septembre 2014). Numerical analysis of the turbine 99 draft tube flow field provoked by redesigned inlet velocity profiles [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (11 pages). Lien externe

Galvan, S., Reggio, M., & Guibault, F. (juillet 2013). Inlet velocity profile optimization of the turbine 99 draft tube [Communication écrite]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2013), Incline Village, NV, United states. Lien externe

Leclaire, S., Trépanier, J.-Y., Reggio, M., & Malouin, B. (mai 2012). Laplace Young's law and multi-layered Couette's flow in a lattice Boltzmann model [Communication écrite]. CFD Society of Canada 20th Annual Conference, Canmore, Alberta. Non disponible

Galvan, S., Reggio, M., & Guibault, F. (juillet 2012). Optimization of the inlet velocity profile in a conical diffuser [Communication écrite]. Fluids Engineering Division Summer Meeting, Puerto Rico, USA. Lien externe

Sagol, E., Reggio, M., & Ilinca, A. (avril 2011). 3D CFD assessment of the performance characteristics of the NREL phase VI experimental wind turbine [Communication écrite]. 19th Annual Conference of the CFD Society of Canada, Montréal, Québec. Non disponible

Galvan, S., Reggio, M., Guibault, F., & Gutierrez, H. (février 2011). Analisis del flujo en el modelo del aspirador de la turbina 99 : resultado de la optimizacion del perfil de velocidades en la entrada [Communication écrite]. 12. Conreso y Exposicion Lationamericana de Trubomaquinaria, Querétaro, Mexico. Non disponible

Toussaint, K., Torriano, F., Morissette, J.-F., & Reggio, M. (juillet 2011). CFD analysis of ventilation flow for a scale model hydro-generator [Communication écrite]. ASME 2011 Power Conference, Denver, Colorado, USA. Lien externe

Leclaire, S., Reggio, M., & Trépanier, J.-Y. (avril 2011). Lattice Boltzmann immiscible three-phase model [Communication écrite]. 19th Annual Conference of the CFD Society of Canada, Montréal, Québec. Non disponible

Guiet, J., Reggio, M., & Vasseur, P. (mai 2010). Application of the lattice Boltzmann method to calculate the natural convection of nanofluids in a shallow cavity [Communication écrite]. 18th Annual Conference of the CFD Society of Canada, Ontario, Canada. Non disponible

Guiet, J., Vasseur, P., Reggio, M., & Leclaire, S. (mai 2010). Application of the lattice Boltzmann method to calculate the natural convection of nanofluids in shallow cavity [Communication écrite]. CFD Society of Canada 18th Annual Conference, London, Ontario. Non disponible

Leclaire, S., Reggio, M., & Trépanier, J.-Y. (mai 2010). Integration of a recoloring algorithm into a Rothman-Keller lattice Boltzmann model [Communication écrite]. 18th Annual Conference of the CFD Society of Canada, Ontario, Canada. Non disponible

Necciari, R., Teyssedou, A., & Reggio, M. (mai 2010). Numerical simulation of cross-flow in tube bundles to model flow circulation of the moderator in CANDU-6 [Communication écrite]. 31th CNS Annual Conference, Montréal, Québec. Non disponible

Guiet, J., Reggio, M., & Teyssedou, A. (mai 2009). Application of the Lattice - Boltzmann method to the calculation of the aerodynamic parameters on clean and ice-accreted airfoils [Communication écrite]. 17th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible

Reggio, M., Ubertini, S., Succi, S., & Bella, G. (mai 2009). Application of the residual distribution methodology to the lattice [Communication écrite]. 17th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible

Villalpando, F., Reggio, M., & Ilinca, A. (mai 2009). Numerical simulation over clean and iced wind turbine blades [Communication écrite]. 17th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible

Villalpando, F., Reggio, M., & Ilinca, A. (septembre 2009). Turbulent flow simulation over ice-accreted wind turbine blades [Communication écrite]. CanWEA 2009 : infinite possibilities. The 25th annual CanWEA conference and exhibition, Toronto, Ont.. Non disponible

Marineau, E. C., & Reggio, M. (mai 2007). A MATLAB Toolbox for the Intuitive Knowledge of Turbomachinery [Communication écrite]. ASME Turbo Expo: Power for Land, Sea, and Air (GT 2007), Montreal, Canada. Lien externe

Petro, E., & Reggio, M. (octobre 2007). Storyboard and fire simulation on an apartment building [Communication écrite]. Advanced Workshop on Fire and Computer Modeling, Santander, Spain. Non disponible

Petro, E., Reggio, M., & Abanto, J. (octobre 2006). Airflow prediction and fire and smoke propagation in large enclosed structures [Communication écrite]. International Technical Congress on Computational Simulation Models in fire Engineering and Research, Santander, Spain. Non disponible

Puente, L. R., Reggio, M., & Guibault, F. (octobre 2006). Optimizing the shape of a hydraulic turbine draft tube [Optimizacion de la forma de un tubo aspirador una turbina hidraulica]. [Communication écrite]. 22nd Latin America International Symposium on Hydraulic Structures, Ciudad Guayana, Venezuela. Non disponible

Martin, A., Trépanier, J.-Y., Reggio, M., & Guo, X. (septembre 2006). Transient ablation regime in circuit-breakers [Communication écrite]. 16th International Conference on Gas Discharges, Xi'an, People's Republic of China. Non disponible

Barrero, D., Petro, E., Abanto, J., & Reggio, M. (août 2005). Airflow modeling and fire smoke propagation in the new École Polytechnique building [Communication écrite]. 9th international IBPSA conference : building simulation 2005, Montréal, Québec. Lien externe

Barrero, D., Abanto, J., Hardy, J.-P., & Reggio, M. (janvier 2005). Serious color fluid dynamics in fire simulation [Communication écrite]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. Lien externe

Abanto, J., Pelletier, D., Garon, A., Trépanier, J.-Y., & Reggio, M. (janvier 2005). Verification of some commercial CFD codes on atypical CFD problems [Communication écrite]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. Lien externe

Barrero, D., Reggio, M., & Ozell, B. (mai 2004). 3-D Flame front tracking for flamelet-based models [Communication écrite]. 12th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible

Abanto, J., Barrero, D., Reggio, M., & Ozell, B. (mai 2003). Airflow modelling in a computer room [Communication écrite]. 11th Annual Conference of the CFD Society of Canada, Vancouver, B.-C. Publié dans Building and Environment, 39(12). Lien externe

Abanto, J., Barrero, D., Reggio, M., Hardy, J.-P., & Ozell, B. (août 2004). Application of CFD tools in building engineering and fire simulation [Communication écrite]. 1st SimBuild 2004, Boulder, Colorado, USA. Lien externe

Barrero, D., Hardy, J.-P., Reggio, M., & Ozell, B. (août 2004). CFD and realistic visualization for the analysis of fire scenarios [Communication écrite]. International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH 2004), Los Angeles, California, USA (101 pages). Lien externe

Barrero, D., Hardy, J.-P., Reggio, M., & Ozell, B. (septembre 2004). Computation and representation of fire and smoke in buildings [Communication écrite]. 9th International Conference on Air Distribution in Rooms, Coimbra, Portugal. Non disponible

Barrero, D., Abanto, J., Reggio, M., Preto, E., & Ozell, B. (septembre 2004). Numerical calculation of fire and smoke in tunnels [Communication écrite]. International Technical Congress on Computational Simulation Models in Fire Engineering and Research, Santander, Espagne. Non disponible

Abanto, J., Barrero, D., Reggio, M., & Ozell, B. (mai 2003). Airflow Modelling in a Computer Room [Communication écrite]. 11th Annual Conference of the CFD Society of Canada (CFD03), Vancouver, B.-C.. Non disponible

Abanto, J., Barrero, D., Reggio, M., & Ozell, B. (mai 2003). Detailed airflow modelling in a computer room [Communication écrite]. Fluent Users' Group Meeting, Manchester, NH, USA. Non disponible

Barrero, D., Ozell, B., & Reggio, M. (mai 2003). On CFD and graphic animation for fire simulation [Communication écrite]. 11th Annual Conference of the CFD Society of Canada, Vancouver, B.-C, Canada. Non disponible

Marineau, E., Reggio, M., Ozell, B., & Trépanier, J.-Y. (septembre 2002). A visualistic approach in aerodynamics [Communication écrite]. 14th International Conference on Design Theory and Methodology, Integrated Systems Design, and Engineering Design and Culture, Montréal, Québec. Lien externe

Thienot, S., Reggio, M., Abanto, J., & Camarero, R. (janvier 2001). Euler flow solution dependency on control volume shape and orientation [Communication écrite]. 39th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. Lien externe

Martin, A., Reggio, M., & Trépanier, J.-Y. (juin 2000). Neptune: un logiciel pour les écoulements de rivière [Communication écrite]. 8th Annual Conference of the CFD Society of Canada, Montréal, Québec (6 pages). Non disponible

Zhang, X. D., Trépanier, J.-Y., Reggio, M., Benmededour, A., & Camarero, R. (janvier 1995). Grid influence on upwind schemes for the Euler and Navier-Stokes equations [Communication écrite]. AIAA : American Institute of Aeronautics and Astronautics Aerospace Sciences Meeting Conference, Reno, NV, USA. Publié dans AIAA journal, 34(4). Lien externe

McNeil, É., Marche, C., Reggio, M., Quach, T., Boyer, R., & Aubin, F. (octobre 1995). Application de la modelisation bi-dimensionnelle de la propagation de l'onde de crue de rupture d'un barrage [Communication écrite]. Canadian Dam Safety Association Conference, Banff (Canada). Non disponible

Zhang, X. D., Trépanier, J.-Y., Reggio, M., Benmeddour, A., & Camarero, R. (janvier 1995). Grid influence on the solution of Euler/Navier-Stokes equations using upwind schemes [Communication écrite]. 33rd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nv. Lien externe

Ilinca, A., Camarero, R., Trépanier, J.-Y., Reggio, M., & Godin, J. (janvier 1995). A new adaptive technique using moving grids [Communication écrite]. 33rd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nv. Lien externe

Paraschivoiu, M., Trépanier, J.-Y., Reggio, M., & Camarero, R. (janvier 1994). A conservative dynamic discontinuity tracking algorithm for the Euler equations [Communication écrite]. 32nd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nv. Lien externe

Zhang, X. D., Trépanier, J.-Y., Reggio, M., & Camarero, R. (janvier 1994). A new local time stepping approach for the unsteady Euler equations [Communication écrite]. 32nd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nv. Lien externe

Affiche

Pérez, J., Trépanier, J.-Y., Reggio, M., & Leclaire, S. (février 2019). Lattice Boltzmann Approach for the Modelling and Simulation of a Water Droplet Impact and Freezing [Affiche]. Simulation-Based Engineering Science Day, Montréal, Québec. Non disponible

Ho, M., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (février 2019). Mesoscopic simulations of thermal protection systems using the lattice Boltzmann method [Affiche]. Simulation-Based Engineering Science Day, Montréal, Québec. Non disponible

Résumé

Ho, M., Pérez, J., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (juin 2019). Investigation of advection-diffusion problems and simulations using the lattice Boltzmann method and the ArrayFire library for high-performance computing on GPU [Résumé]. Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress, London, Ontario. Lien externe

Livre

Galvan, S., Reggio, M., & Guibault, F. (2010). Inlet velocity profile optimization of the turbine 99 draft tube. Lien externe

Chapitre de livre

Leclaire, S., El-Hachem, M., & Reggio, M. (2012). Convolution kernel for fast CPU/GPU computation of 2D/3D isotropic gradients on a square/cubic lattice. Dans Katsikis, V. (édit.), MATLAB - A Fundamental Tool for Scientific Computing and Engineering Applications - Volume 3 (Vol. 3, 195-216). Disponible

Sosa Coeto, J. B., Urquiza Beltrán, G., García Castrejon, J. C., Castro Gómez, L. L., & Reggio, M. (2012). Optimization of the impeller and diffuser of hydraulic submersible pump using computational fluid dynamics and artificial neural networks. Dans Logistic management and optimization through hybrid artificial intelligent systems . Lien externe

Camarero, R., Ozell, B., Reggio, M., & Garon, A. (1986). Introduction to grid generation in turbomachinery. Dans Degrez, G., & Deconinck, H. (édit.), Numerical Techniques for Viscous Flow Calculations in Turbomachinery Blading . Non disponible

Liste produite: Fri Mar 29 04:01:51 2024 EDT.