 | Monter d'un niveau |
Abbasi, S., Derdouri, A., & Carreau, P. (2011). Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites. Polymer Engineering and Science, 51(5), 992-1003. Lien externe
Abdollahi Neisiani, M., & Chaouki, J. (mai 2011). Improving biomass gasification in bubbling fluidized bed with new and cheap catalyst [Communication écrite]. 10th International Conference on Circulating Fluidiezed Beds and Fluidization Technology, Sunriver, Oregon. Non disponible
Aghabararnejad, M., Chaouki, J., & Patience, G. S. (mai 2011). The development of a novel Cu-Mn oxygen carrier for the chemical looping gasification of biomass [Communication écrite]. 10th International Conference on Circulating Fluidized Beds and Fluidization Technology (CFB 2011), Sun River, Oregon (8 pages). Lien externe
Ajao, O., Rafione, T., & Marinova, M. (mai 2011). Rétro-installation d'une bioraffinerie forestière dans une usine de pâte Kraft pour la production de furfural [Communication écrite]. 79e Congrès de l'ACFAS, Sherbrooke. Non disponible
Alameh, M., DeJesus, D., Benhamadi, M., Jean, M., Buschmann, M. D., & Merzouki, A. (mai 2011). Chitosan nanoparticulate system for the delivery of siRNA targeting genome caretakers for the development of potential cancer therapies [Communication écrite]. 1st Meeting of Canadian Chapter of The Controlled Release Society, Montréal, Québec. Non disponible
Alizadeh, E., Bonniol, F., Bouffard, J., Dubé, O., Chaouki, J., & Bertrand, F. (septembre 2011). Efficient modeling tools for the simulation of industrial granular mixing flows [Communication écrite]. International Symposium on Mixing in Industrial Processes VII (ISMIP), Beijing, China. Non disponible
Alizadeh, E., Bonniol, F., Bouffard, J., Dubé, O., Chaouki, J., & Bertrand, F. (novembre 2011). Efficient modeling tools for the simulation of industrial granular mixing flows [Communication écrite]. 25th Interamerican Congress of Chemical Engineering, Santiago, Chile. Non disponible
Alizadeh, E., Chaouki, J., & Bertrand, F. (octobre 2011). Discrete element simulation of particle mixing in a saddle blender [Communication écrite]. 2011 AIChE annual Meeting, Minneapolis, MN. Lien externe
Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (mai 2011). The biomechanical behavior of the growth plate under compression is related to its collagen content and organization [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Ansorge, S., Lanthier, S., Transfiguracion, J., Henry, O., & Kamen, A. A. (2011). Monitoring lentiviral vector production kinetics using online permittivity measurements. Biochemical Engineering Journal, 54(1), 16-25. Lien externe
Azar, F. E., Perrier, M., & Srinivasan, B. (2011). Extension of multiunit global optimisation to three-input systems. Canadian Journal of Chemical Engineering, 89(3), 411-420. Lien externe
Bagué, A., Heniche, M., Fradette, L., Tanguy, P. A., & Takenaka, K. (septembre 2011). Effect of speed ratio on power consumption in a superblend miser - a numerical study [Communication écrite]. ISMIP VII, Beijing, China. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2011). A model for analysis and design of H2O-LiBr absorption heat pumps. Energy Conversion and Management, 52(2), 1439-1448. Lien externe
Bamard, E., Bulle, C., & Deschênes, L. (2011). Method development for aquatic ecotoxicological characterization factor calculation for hydrocarbon mixtures in life cycle assessment. Environmental Toxicology and Chemistry, 30(10), 2342-2352. Lien externe
Banerjee, T., Wasik, L., Marinova, M., & Sreng, S. D. (février 2011). Process simulation of integrated forest biorefineries [Communication écrite]. International Forest Biorefinery Symposium, Montréal, Québec. Non disponible
Bashiri, H., Chaouki, J., Bertrand, F., & Heniche, M. (juin 2011). CFD-based compartmental modelling of stirred tank reactors [Communication écrite]. 10th conferences on Gas-Liquid and Gas-Liquid-Solid reactor Engineering (GLS 2011), Braga, Portugal. Non disponible
Batsy, D. R., Brown, M., Samson, R., & Stuart, P. R. (juin 2011). Impact des politiques énergétiques et des changements climatiques dans la sélection des stratégies durables de bioraffinerie forestière [Présentation]. Dans 3e Forum étudiant du CIRAIG, Montréal, Qc, Canada. Non disponible
Batsy, D. R., Brown, M., Samson, R., & Stuart, P. R. (juin 2011). Implication of Regulatory and Climate Policy in the Selection of Sustainable Forest Biorefinery Strategies [Présentation]. Dans VCO Summer School, Québec City, QC. Non disponible
Bélanger-Gravel, J. (2011). Analyse technico-économique d'un système hybride éolien-photovoltaïque en comparaison avec les systèmes photovoltaïque et éolien seuls [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ben Amor, M. (2011). Intégration de la dymanique de la production électrique et évaluation des conséquences environnementales et économiques du cycle de vie de la production distribuée [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ben Amor, M., Pineau, P.-O., Gaudreault, C., & Samson, R. (2011). Electricity trade and GHG emissions: Assessment of Quebec's hydropower in the Northeastern American market (2006-2008). Energy Policy, 39(3), 1711-1721. Lien externe
Bernier, E. (2011). Optimisation thermo-économique et environnementale du cycle de vie d'un procédé de capture de dioxyde de carbone dans une centrale termique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bertolazzi, S., Wünsche, J., Cicoira, F., & Santato, C. (2011). Tetracene thin film transistors with polymer gate dielectrics. Applied Physics Letters, 99(1), 3 pages. Lien externe
Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M., & Favis, B. D. (2011). Morphology and continuity development in highly reactive nanoscale polymer blends. Polymer, 52(22), 5107-5117. Lien externe
Bizet, A. A., Liu, K., Tran-Khanh, N., Saksena, A., Vorstenbosch, J., Finnson, K. W., Buschmann, M. D., & Philip, A. (2011). The TGF-ß co-receptor, CD109, promotes internalization and degradation of TGF-ß receptors. Biochimica et Biophysica Acta (BBA) - Molecular Cell Research, 1813(2), 742-753. Lien externe
Bodizs, L., Srinivasan, B., & Bonvin, D. (2011). On the design of integral observers for unbiased output estimation in the presence of uncertainty. Journal of Process Control, 21(3), 379-90. Lien externe
Boulay, A.-M., Bouchard, C., Bulle, C., Deschênes, L., & Margni, M. (2011). Categorizing water for LCA inventory. International Journal of Life Cycle Assessment, 16(7), 639-651. Lien externe
Boulay, A.-M., Bulle, C., Bayart, J.-B., Deschênes, L., & Margni, M. (2011). Regional characterization of freshwater use in LCA: Modeling direct impacts on human health. Environmental Science and Technology, 45(20), 8948-8957. Lien externe
Brault, J.-M., Labib, R., Perrier, M., & Stuart, P. R. (2011). Prediction of activated sludge filamentous bulking using ATP data and neural networks. Canadian Journal of Chemical Engineering, 89(4), 901-913. Lien externe
Brault, J.-M., Whalen, P., & Stuart, P. R. (2011). Early warning signs of bulking in an activated sludge system through interpretation of ATP data in a systems analysis context. Environmental Technology, 32(14), 1649-1660. Lien externe
Brito Bazan, M. M. (2011). Mixing Studies in a Co-Kneader [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bulle, C. S. M., Samson, R., & Deschênes, L. (2011). Transport of chlorinated dioxins and furans in soil columns: Modeling pentachlorophenol pole-treating oil influence. Chemosphere, 83(2), 117-123. Lien externe
Buschmann, M. D., & Saris, D. B. (2011). Introduction to the International Cartilage Repair Society recommendation papers. CARTILAGE, 2(2), 99-99. Lien externe
Changoor, A., Coutu, J. P., Garon, M., Quenneville, E., Hurtig, M. B., & Buschmann, M. D. (mai 2011). Sensitivity of a streaming potential -based arthroscopic device to cartilage changes produced in an ex vivo equine cartilage injury model [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Changoor, A., Coutu, J. P., Garon, M., Quenneville, E., Hurtig, M. B., & Buschmann, M. D. (2011). Streaming potential-based arthroscopic device is sensitive to cartilage changes immediately post-impact in an equine cartilage injury model. Journal of Biomechanical Engineering, 133(6), 1-9. Lien externe
Changoor, A., Nelea, M., Méthot, S., Tran-Khanh, N., Chevrier, A., Restrepo, A., Shive, M. S., Hoemann, C. D., & Buschmann, M. D. (2011). Structural characteristics of the collagen network in human normal, degraded and repair articular cartilages observed in polarized light and scanning electron microscopies. Osteoarthritis and Cartilage, 19(12), 1458-1468. Lien externe
Changoor, A., Nelea, M., Méthot, S., Tran-Khanh, N., Chevrier, A., Restrepoi, A., Shive, M. S., Hoemann, C. D., & Buschmann, M. D. (mai 2011). Collagen network structure in human normal, degraded and repair articular cartilages [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Changoor, A., Tran-Khanh, N., Methot, S., Garon, M., Hurtig, M., Shive, M. S., & Buschmann, M. D. (2011). A polarized light microscopy method for accurate and reliable grading of collagen organization in cartilage repair. Osteoarthritis and Cartilage, 19(1), 126-135. Lien externe
Charbonneau, C., Liberelle, B., Hebert, M.-J., De Crescenzo, G., & Lerouge, S. (2011). Stimulation of cell growth and resistance to apoptosis in vascular smooth muscle cells on a chondroitin sulfate/epidermal growth factor coating. Biomaterials, 32(6), 1591-1600. Lien externe
Chartrand, P., Bale, C. W., & Pelton, A. (2011). Development of the FACT/FactSage System and its impact in Canadian Metallurgy. Dans The Canadian metallurgical and materials landscape 1960 to 2011 (395-420). Lien externe
Chartrand, P., Robelin, C., Heyrman, M., & Tripathi, N. (mai 2011). The cryolite database for the Hall-Heroult alumina reduction process [Présentation]. Dans CALPHAD XL, Rio de Janeiro, Brazil. Non disponible
Chen, G., Sun, J., Lascau-Coman, V., Chevrier, A., Marchand, C., & Hoemann, C. D. (2011). Acute Osteoclast Activity following Subchondral Drilling Is Promoted by Chitosan and Associated with Improved Cartilage Repair Tissue Integration. CARTILAGE, 2(2), 173-185. Lien externe
Chen, H., Chevrier, A., Hoemann, C. D., Sun, J., Ouyang, W., & Buschmann, M. D. (2011). Characterization of subchondral bone repair for marrow-stimulated chondral defects and its relationship to articular cartilage resurfacing. American Journal of Sports Medicine, 39(8), 1731-1730. Lien externe
Chen, H., Hoemann, C. D., Sun, J., Chevrier, A., McKee, M. D., Shive, M. S., Hurtig, M., & Buschmann, M. D. (2011). Depth and type of subchondral perforation influence the outcome of bone marrow stimulation cartilage repair. Journal orthopaedic research, 29(8), 1178-1184. Lien externe
Chevrier, A., Hoemann, C. D., Sun, J., & Buschmann, M. D. (2011). Temporal and spatial modulation of chondrogenic foci in subchondral microdrill holes by chitosan-glycerol phosphate/blood implants. Osteoarthritis and Cartilage, 19(1), 136-144. Lien externe
Chew, I. M. L., Foo, D. C. Y., Lam, H. L., Bonhivers, J.-C., Stuart, P. R., Savulescu, L. E., & Alva-Argaez, A. (2011). Simultaneous water and energy optimization for a pulp and paper mill. Chemical Engineering Transactions, 25, 441-446. Lien externe
Chiron, F.-X., & Patience, G. S. (octobre 2011). Hydrogen production via water splitting over Fe-Cu based oxygen carriers [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible
Chiron, F.-X., & Patience, G. S. (2011). Steam carbon gasification of a nickel based oxygen carrier. Fuel, 90(7), 2461-2466. Lien externe
Chiron, F.-X., Patience, G. S., & Rifflart, S. (2011). Hydrogen production through chemical looping using NiO/NiAl₂O₄ as oxygen carrier. Chemical Engineering Science, 66(24), 6324-6330. Lien externe
Cicoira, F., Aguirre, C. M., & Martel, R. (2011). Making contacts to n-type organic transistors using carbon nanotube arrays. ACS Nano, 5(1), 283-290. Lien externe
Cicoira, F., Coppedé, N., Martel, R., & Iannotta, S. (2011). Ambipolar copper phthalocyanine transistors with carbon nanotube array electrodes. Applied Physics Letters, 98(18), 3 pages. Lien externe
Cloitre, M., Virgilio, N., & Vlassopoulos, D. (octobre 2011). A comparative LAOS study of yielding and flow in soft glasses [Présentation]. Dans 83rd Annual Meeting of the Society of Rheology, Cleveland, Ohio. Non disponible
Cossu, C., Heuzey, M.-C., Lussier, L.-S., & Dubois, C. (2011). Early development of a biodegradable energetic elastomer. Journal of Applied Polymer Science, 119(6), 3645-57. Lien externe
Cougnon, P., Dochain, D., Guay, M., & Perrier, M. (2011). On-line optimization of fedbatch bioreactors by adaptive extremum seeking control. Journal of Process Control, 21(10), 1526-1532. Lien externe
Dandres, T., Gaudreault, C., Tirado-Seco, P., & Samson, R. (2011). Assessing non-marginal variations with consequential LCA: Application to European energy sector. Renewable and Sustainable Energy Reviews, 15(6), 3121-3132. Lien externe
De Los Rios Salgado, C., Romero Martinez, A., Maiquez, J. E., Leon Martinez, R., Villarroya Sanchez, A., Marco Contelles, J. L., Soriano Santamaria, E., Samadi, A., & Chioua, M. (2011). 1,8-naphthyridine-derived compounds and the use thereof in the treatment of neurodegenerative diseases. [Composés dérivés de 1,8-naphtyridines et leur utilisation dans le traitement de maladies neurodégénératives]. (Demande de brevet no WO2011051527). Lien externe
DeJesus, D., Alameh, M., Jean, M., Lascau, V., Buschmann, M. D., & Merzouki, A. (mai 2011). Therapeutic lowering of circulating ApoB in atherosclerotic mice by intravenous administration of chitosan-siRNA nanoparticles [Communication écrite]. 1st Meeting of Canadian Chapter of The Controlled Release Society, Montréal, Québec. Non disponible
Demuysère, R. (2011). Développement d'un indice mesurant la stabilité enzymatique relative des sols pour évaluer l'impact d'une contamination organique complexe sur la qualité de sols dans un contexte de remédiation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dewasme, L., Srinivasan, B., Perrier, M., & Vande Wouwer, A. (2011). Extremum-seeking algorithm design for fed-batch cultures of microorganisms with overflow metabolism. Journal of Process Control, 21(7), 1092-1104. Lien externe
Dimitrievska, S., Maire, M., Diaz-Quijada, G. A., Robitaille, L., Ajji, A., Yahia, L., Moreno, M., Merhi, Y., & Bureau, M. (2011). Low Thrombogenicity Coating of Nonwoven PET Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(4), 493-502. Lien externe
Dimitrievska, S., Petit, A., Doillon, C. J., Epure, L., Ajji, A., Yahia, L., & Bureau, M. (2011). Effect of Sterilization on Non-woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(1), 13-21. Lien externe
Dochain, D., Perrier, M., & Guay, M. (2011). Extremum seeking control and its application to process and reaction systems: A survey. Mathematics and Computers in Simulation, 82(3), 369-380. Lien externe
Doucet, J., Bonniol, F., Bertrand, F., & Chaouki, J. (octobre 2011). Measurement of mixing quality in multiphase systems [Communication écrite]. 2011 AIChE annual Meeting, Minneapolis, MN. Lien externe
Dubé, O., Chaouki, J., & Bertrand, F. (octobre 2011). Dynamics of monoshaped non-spherical particles in a cylindrical tumbler [Communication écrite]. 2011 AIChE annual Meeting, Minneapolis, MN. Lien externe
Dubois, J.-L., Dupont, N., & Patience, G. S. (2011). Process for the selective oxidation of carbon monoxide. (Demande de brevet no US20130131380). Lien externe
Dupuis, A., Stoeffler, K., Ung, B., Dubois, C., & Skorobogatiy, M. A. (2011). Transmission measurements of hollow-core THz Bragg fibers. Journal of the Optical Society of America B: Optical Physics, 28(4), 896-907. Lien externe
Esmaeilzadeh Azar, F., Perrier, M., & Srinivasan, B. (2011). A global optimization method based on multi-unit extremum-seeking for scalar nonlinear systems. Computers and Chemical Engineering, 35(3), 456-463. Lien externe
Esmaeilzadeh Azar, F., Perrier, M., & Srinivasan, B. (juin 2011). Global optimization of three-input systems using multi-unit extremum seeking control [Communication écrite]. American Control Conference, ACC 2011, San Francisco, California, USA. Lien externe
Fang, H., Mighri, F., Ajji, A., Cassagnau, P., & Elkoun, S. (2011). Flow behavior in a corotating twin-screw extruder of pure polymers and blends: Characterization by fluorescence monitoring technique. Journal of Applied Polymer Science, 120(4), 2304-2312. Lien externe
Farag, S., Sobhy, A., & Chaouki, J. (février 2011). Comparison betwen microwave and conventional heating for high-temperature biorefinery of waste biomass [Communication écrite]. International Forest Biorefinery Symposium, Montréal, Québec. Non disponible
Farag, S., Sobhy, A., & Chaouki, J. (octobre 2011). Production of aromatics using microwave pyrolysis of lignin [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ont.. Non disponible
Farag, S., Sobhy, A., Akyel, C., & Chaouki, J. (mai 2011). Production de produits chimiques à partir du traitement thermique aux micro-ondes de lignine [Communication écrite]. Colloque étudiant sur le développement de produits biosourcés (ACFAS-COLLOQUE 118), Sherbrooke, Québec. Non disponible
Farrie, Y. (2011). Conversion catalytique de la glycérine en acroléine dans un lit fluidisé [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Favis, B. D., Sarazin, P., Li, J., & Yuan, Z. (2011). Microporous articles comprising biodegradable medical polymers, method of preparation thereof and method of use thereof. (Brevet no US8007823). Lien externe
Fotovat, F., Chaouki, J., Bergthorson, J., & Latifi, M. (mai 2011). The influence of Biomass Properties on the Fluidization Hydrodynamics of Solid Mixtures Containing Biomass [Communication écrite]. Bioenergy III: Present and New Perspectives on Biorefineries, Lanzarote, Canary Islands, Spain. Non disponible
François, G., Srinivasan, B., & Bonvin, D. (2011). A globally convergent algorithm for the run-to-run control of systems with sector nonlinearities. Industrial and Engineering Chemistry Research, 50(3), 1410-1418. Lien externe
Garza Villarreal, H. (2011). Assessment and Enhancement of the Performance of the Pulp Washing Operation in Kraft Mills [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghasemi, H., Carreau, P., Kamal, M. R., & Uribe-Calderon, J. (2011). Preparation and characterization of PET/clay nanocomposites by melt compounding. Polymer Engineering and Science, 51(6), 1178-1187. Lien externe
Gheribi, A. E., Robelin, C., Le Digabel, S., Audet, C., & Pelton, A. (2011). Calculating all local minima on liquidus surfaces using the FactSage software and databases and the Mesh Adaptive Direct Search algorithm. Journal of Chemical Thermodynamics, 43(9), 1323-1330. Lien externe
Ghezzaz, H. (2011). Méthode systématique de conception pour comparer les procédés de bioraffinage intégrés dans une usine existante de pâtes et papiers [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghezzaz, H., & Stuart, P. R. (2011). Biomass availability and process selection for an integrated forest biorefinery. Pulp and Paper Canada, 112(3), 19-26. Non disponible
Gigout, A., Ruiz, J.-C., Wertheimer, M. R., Jolicoeur, M., & Lerouge, S. (2011). Nitrogen-Rich Plasma-Polymerized Coatings on PET and PTFE Surfaces Improve Endothelial Cell Attachment and Resistance to Shear Flow. Macromolecular Bioscience, 11(8), 1110-1119. Lien externe
Goffaux, G., Perrier, M., & Cloutier, M. (août 2011). Cell energy metabolism : a constrained ensemble Kalman filter [Communication écrite]. 18th IFAC World Congress, Milano, Italy. Publié dans IFAC Proceedings Volumes, 44(1). Lien externe
Grmela, M. (2011). Relations among results of thermodynamic and rheological measurements. Makromolekulare Chemie. Macromolecular Symposia, 56(1), 43-53. Lien externe
Grmela, M. (2011). Thermodynamics: A structure emerging in the study of relations among different scales. International Journal for Multiscale Computational Engineering, 9(1), 35-51. Lien externe
Grmela, M., Ammar, A., & Chinesta, F. (2011). Extra stress tensor in fiber suspensions: Mechanics and thermodynamics. Journal of Rheology, 55(1), 17-42. Lien externe
Grmela, M., Lebon, G., & Dubois, C. (2011). Multiscale thermodynamics and mechanics of heat. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics, 83(6), 061134-061134. Lien externe
Guerrero Palacio, M. P., Rochefort, D., & Bertrand, F. (juin 2011). Improving large-scale immobilization of enzymatic biosensors by microencapsulation [Communication écrite]. 94th Canadian Chemical Engineering Conference, Montréal, Qc, Canada. Non disponible
Guerrero, M. P., Bertrand, F., & Rochefort, D. (2011). Activity, stability and inhibition of a bioactive paper prepared by large-scale coating of laccase microcapsules. Chemical Engineering Science, 66(21), 5313-5320. Lien externe
Guy, C. (novembre 2011). Open innovation : A successful example from Québec [Communication écrite]. International Presidential Forum on Global Research Universities, Séoul. Non disponible
Guzman-Morales, J., Ariganello, M. B., Hammami, I., Thibault, M., Jolicoeur, M., & Hoemann, C. D. (2011). Biodegradable chitosan particles induce chemokine release and negligible arginase-1 activity compared to IL-4 in murine bone marrow-derived macrophages. Biochemical and Biophysical Research Communications, 405(4), 538-544. Lien externe
Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe
Hadjizadeh, A., Ajji, A., & Bureau, M. (2011). Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), 340-351. Lien externe
Hammami, I. (2011). Étude métabolique des cellules myéloïdes suppressives dans le contexte du phénomène d'immunosuppression [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hammami, I., Chen, J., Bronte, V., De Crescenzo, G., & Jolicoeur, M. (2011). Myeloid-derived suppressor cells exhibit two bioenergetic steady-states in vitro. Journal of Biotechnology, 152(1-2), 43-48. Lien externe
Harvey, J.-P., & Gheribi, A. E. (2011). Comment on ``Determination of the bulk melting temperature of nickel using Monte Carlo simulations: Inaccuracy of extrapolation from cluster melting temperatures''. Physical Review. B, Condensed Matter and Materials Physics, 84(9), 096102-096102. Lien externe
Harvey, J.-P., Gheribi, A. E., & Chartrand, P. (2011). Accurate determination of the Gibbs energy of Cu-Zr melts using the thermodynamic integration method in Monte Carlo simulations. Journal of Chemical Physics, 135(8). Lien externe
Hekmat-Ardakan, A., Ajersch, F., & Chen, X.-G. (2011). Microstructure modification of Al-17%Si alloy by addition of Mg. Journal of Materials Science, 46(7), 2370-2378. Lien externe
Henderson, A. D., Hauschild, M. Z., van de Meent, D., Huijbregts, M. A. J., Larsen, H. F., Margni, M., McKone, T. E., Payet, J., Rosenbaum, R. K., & Jolliet, O. (2011). USEtox fate and ecotoxicity factors for comparative assessment of toxic emissions in life cycle analysis: sensitivity to key chemical properties. International Journal of Life Cycle Assessment, 16(8), 701-709. Lien externe
Heniche, M., & Mosser, P. A. (septembre 2011). A modeling strategy to predict the hydrodynamics in stirred tanks with moving free surface [Communication écrite]. 11th AICHE Annual Meeting, Minneapolis, MN, USA. Lien externe
Henry, O., & Durocher, Y. (2011). Enhanced glycoprotein production in HEK-293 cells expressing pyruvate carboxylase. Metabolic Engineering, 13(5), 499-507. Lien externe
Henry, O., Jolicoeur, M., & Kamen, A. A. (2011). Unraveling the metabolism of HEK-293 cells using lactate isotopomer analysis. Bioprocess and Biosystems Engineering, 34(3), 263-73. Lien externe
Hoemann, C. D., & Sun, J. (2011). Two-part cytocompatible system, useful to prepare a cytocompatible polymer composition for repairing e.g. cartilage, comprises a first part liquid solution of a polymer in a first container and a second part liquid solution of a salt. (Demande de brevet no WO2011060553). Lien externe
Hoemann, C. D., Kandel, R. A., Roberts, S., Saris, D. B. F., Creemers, L., Mainil-Varlet, P., Methot, S., Hollander, A. P., & Buschmann, M. D. (2011). International Cartilage Repair Society (ICRS) Recommended Guidelines for Histological Endpoints for Cartilage Repair Studies in Animal Models and Clinical Trials. CARTILAGE, 2(2), 153-172. Lien externe
Hoemann, C. D., Sun, J., Hurtig, M., Guzman-Morales, J., & Hubert-Lafantaisie, C. (2011). Presolidified composition and method for in situ delivery of broad molecular weight range of chitosan implants with or without therapeutics for regenerative medicine and cartilage repair applications. (Demande de brevet no WO2011060554). Lien externe
Hurtig, M. B., Buschmann, M. D., Fortier, L. A., Hoemann, C. D., Hunziker, E. B., Jurvelin, J. S., Mainil-Varlet, P., McIlwraith, C. W., Sah, R. L., & Whiteside, R. A. (2011). Preclinical studies for cartilage repair : recommendations from the International Cartilage Repair Society. CARTILAGE, 2(2), 137-152. Lien externe
Hytonen, E., & Stuart, P. R. (2011). A systematic quantification of performance factors has potential for making better informed decisions for biofuel development. PPI Pulp and Paper International, 53(10), 23-32. Non disponible
Hytönen, V. E. (2011). Methodology for Identifying Promising Retrofit Integrated Forest Biorefinery Strategies - Design Decision Making Under Uncertainty [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Isik, D., Shu, Y., Tarabella, G., Coppede, N., Iannotta, S., Lutterotti, L., Cicoira, F., Anthony, J. E., & Santato, C. (2011). Ambipolar organic thin film transistors based on a soluble pentacene derivative. Applied Physics Letters, 99(2). Lien externe
Jean, M., Alamech, M., Buschmann, M. D., & Merzouki, A. (2011). Effective and safe gene-based delivery of GLP using chitosan/plasmid-DNA therapeutic nanocomplexes in an animal model of diabetes. Gene Therapy, 18(8), 807-816. Lien externe
Jean, M., Alameh, M., Daras, V., Lavertu, M., Thibault, M., Buschmann, M. D., & Merzouki, A. (mai 2011). Effective and safe gene-based delivery of GLP-1 using chitosan/plasmid-DNA therapeutic nanocomplexes in an animal model of Type 2 Diabetes [Communication écrite]. 14th Annual Meeting American Society of Gene and Cell Therapy, Seattle, WA, USA. Non disponible
Jean, M., Alameh, M., Daras, V., Lavertu, M., Thibault, M., Buschmann, M. D., & Merzouki, A. (mai 2011). Effective and safe gene-based delivery of GLP-1 using chitosan/plasmid-DNA therapeutic nanocomplexes in an animal model of Type 2 Diabetes [Communication écrite]. 1st Meeting of Canadian Chapter of The Controlled Release Society, Montréal, Québec, Canada. Non disponible
Jin, L., Kang, Y.-B., Chartrand, P., & Fuerst, C. D. (2011). Thermodynamic evaluation and optimization of Al-La, Al-Ce, Al-Pr, Al-Nd and Al-Sm systems using the Modified Quasichemical Model for liquids. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 35(1), 30-41. Lien externe
Kaarsholm, M., Joensen, F., Cenni, R., Chaouki, J., & Patience, G. S. (2011). MEOH to DME in bubbling fluidized bed: Experimental and modelling. Canadian Journal of Chemical Engineering, 89(2), 274-283. Lien externe
Kaenzig, J., Friot, D., Saadé, M., Margni, M., & Jolliet, O. (2011). Using Life Cycle Approaches to Enhance the Value of Corporate Environmental Disclosures. Business Strategy and the Environment, 20(1), 38-54. Lien externe
Kamal, W. (2011). Analysis of Energy Systems and Performance Improvement of a Kraft Pulping Mill [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Kazemi, M., Li, L. P., Savard, P., & Buschmann, M. D. (2011). Creep behavior of the intact and meniscectomy knee joints. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1351-1358. Lien externe
Khalkhal, F. (2011). Characterization of Flow-Induced Structures in Carbon Nanotube Suspensions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Khalkhal, F., Carreau, P., & Ausias, G. (2011). Effect of flow history on linear viscoelastic properties and the evolution of the structure of multiwalled carbon nanotube suspensions in an epoxy. Journal of Rheology, 55(1), 153-175. Lien externe
Kim, W. Y. (2011). Modeling Viscosity of Molten Slags and Glasses [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Kim, W.-Y., Yang, X., Yan, L., Pelton, A., & Decterov, S. (2011). Modeling the viscosity of silicate melts containing zinc oxide. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 35(4), 542-550. Lien externe
Korbel, M. (2011). On-Line Steady-State Data Reconciliation for Advanced Cost Analysis in the Pulp and Paper Industry [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Korbel, M., & Stuart, P. R. (janvier 2011). Advanced Operations-Driven Cost Assessment of Manufacturing Processes Using Reconciled Real-Time Process Data [Présentation]. Dans OSIsoft Users Meeting, Montréal, QC. Non disponible
Korbel, M., & Stuart, P. R. (janvier 2011). On-Line Assessment of Product Operating Margins using Real-Time Process Data [Présentation]. Dans 3C Software Management meeting, Atlanta, GA. Non disponible
Kounina, A., Margni, M., Aoustin, E., Bare, J., Bayart, J. B., Berger, M., Boulay, A.-M., Bulle, C., Frischknecht, R., Koehler, A., Lundie, S., Mila-i-Canals, M., Motoshita, M., Núñez, M., Peters, G., Pfister, S., Ridoutt, B., Zelm, R. , Verones, F., & Humbert, S. (mai 2011). Qualitative characterisation of available assessment methods assessing human water use [Résumé]. SETAC Europe 21st Annual Meeting, Milano, Italy. Non disponible
Koutsaris, C. (2011). Metallic Foam Formation During Continuous Hot-Dip Galvanizing of Steel Sheet [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Labonte, M., & Dubois, C. (mai 2011). Optimization of molding conditions of a plug-assisted thermoformed thin containers in a high speed and volume production context [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Non disponible
Lambotte, G., & Chartrand, P. (2011). Thermodynamic evaluation and optimization of the Al2O 3-SiO2-AlF3-SiF4 reciprocal system using the modified quasichemical model. Journal of the American Ceramic Society, 94(11), 4000-4008. Lien externe
Lambotte, G., & Chartrand, P. (2011). Thermodynamic optimization of the (Na2O + SiO2 + NaF + SiF4) reciprocal system using the Modified Quasichemical Model in the Quadruplet Approximation. Journal of Chemical Thermodynamics, 43(11), 1678-1699. Lien externe
Laurent, A., Lautier, A., Rosenbaum, R. K., Olsen, S. I., & Hauschild, M. Z. (2011). Normalization references for Europe and North America for application with USEtox (TM) characterization factors. International Journal of Life Cycle Assessment, 16(8), 728-738. Lien externe
Lavertu, M., Nimesh, S., Sim, S., Thibault, M., & Buschmann, M. D. (mai 2011). Chitosan Structure Related to Transfection Efficiency and Colloidal Stability [Communication écrite]. 14th Annual Meeting American Society of Gene and Cell Therapy, Seattle, Washington. Publié dans Molecular Therapy, 19(7). Lien externe
Laviolette, J.-P., Patience, G. S., & Chaouki, J. (2011). Non-premixed fluidized bed combustion of C1-C4 n-alkanes. Fuel, 90(9), 2850-2857. Lien externe
Le Corroller, P., & Favis, B. D. (2011). Effect of viscosity in ternary polymer blends displaying partial wetting phenomena. Polymer, 52(17), 3827-3834. Lien externe
Lebon, G., Grmela, M., & Dubois, C. (2011). From ballistic to diffusive regimes in heat transport at nano-scales. Comptes Rendus Mécanique, 339(5), 324-328. Lien externe
Lebon, G., MacHrafi, H., Grmela, M., & Dubois, C. (2011). An extended thermodynamic model of transient heat conduction at sub-continuum scales. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 467(2135), 3241-3256. Lien externe
Levasseur, A. (2011). Développement d'une méthode d'analyse du cycle de vie dynamique pour l'évaluation des impacts sur le réchauffement climatique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Li, G., Sarazin, P., & Favis, B. D. (mai 2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Lien externe
Li, G., Sarazin, P., Orts, W. J., Imam, S. H., & Favis, B. D. (2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology. Macromolecular Chemistry and Physics, 212(11), 1147-1154. Lien externe
Li, R. (2011). Electrodeposition and Characterization of ZnO Thin Films for Solar Cell Applications [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Liard, G. (2011). Intégration de l'analyse du cycle de vie dans le processus de prise de décision : application à la bioraffinerie à base de triticale en Alberta [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Maani, A., Heuzey, M.-C., & Carreau, P. (2011). Coalescence in thermoplastic olefin (TPO) blends under shear flow. Rheologica Acta, 50(11-12), 881-895. Lien externe
MacQueen, L. A., Thibault, M., Buschmann, M. D., & Wertheimer, M. R. (août 2011). Electric-field-based methods for the manipulation and modification of biological cells in suspension [Communication écrite]. IEEE 14th International Symposium on Electrets, ISE 2011, Montpellier, France. Lien externe
MacQueen, L. A., Thibault, M., Buschmann, M. D., & Wertheimer, M. R. (août 2011). Electro-mechanical manipulation of mammalian cells in suspension [Communication écrite]. IEEE 14th International Symposium on Electrets, ISE 2011, Montpellier, France. Lien externe
Mailier, J., Delmotte, A., Cloutier, M., Jolicoeur, M., & Wouwer, A. V. (2011). Parametric sensitivity analysis and reduction of a detailed nutritional model of plant cell cultures. Biotechnology and Bioengineering, 108(5), 1108-1118. Lien externe
Manneh, R. (2011). Évaluation de l'incertitude lors du développement de la fraction prise pour la détermination des impacts sur la santé humaine dans le cadre de l'analyse du cycle de vie [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Marchand, C., Chen, H., Buschmann, M. D., & Hoemann, C. D. (2011). Standardized three-dimensional volumes of interest with adapted surfaces for more precise subchondral bone analyses by micro-computed tomography. Tissue Engineering. Part C, Methods, 17(4), 475-484. Lien externe
Margni, M., Boulay, A.-M., & Bulle, C. (2011). LCA characterisation of freshwater use on human health and through compensation. Dans Finkbeiner, M. (édit.), Towards life cycle sustainability management (193-204). Lien externe
Mariano, A. P., Keshtkar, M. J., Atala, D. I. P., Filho, F. M., Maciel, M. R. W., Filho, R. M.I., & Stuart, P. R. (2011). Energy requirements for butanol recovery using the flash fermentation technology. Energy and Fuels, 25(5), 2347-2355. Lien externe
Martin, E. (2011). Étude de la performance de piles à combustible microbiennes et l'effet des matériaux d'électrodes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Martin, E., Tartakovsky, B., & Savadogo, O. (2011). Cathode materials evaluation in microbial fuel cells: A comparison of carbon, Mn2O3, Fe2O3 and platinum materials. Electrochimica Acta, 58(1), 58-66. Lien externe
Mateos-Blanco, R., Shekari, A., Gonzalez Carrazan, S., Caldarelli, Z., Cavani, F., Bordes-Richard, E., Patience, G. S., & Ruiz, P. (août 2011). Significant catalytic activity recovery of deactivated industrial Du-Pont VPO catalysts by surface deposition of small amounts of oxide [Communication écrite]. EuropaCAt X, Glasgow, Scotland. Non disponible
Mateos-Espejel, E., Savulescu, L., & Paris, J. (2011). Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part I: Definition and characterization. Chemical Engineering Research and Design, 89(6), 742-752. Lien externe
Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2011). Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis. Chemical Engineering Research and Design, 89(6), 729-741. Lien externe
Mateos-Espejel, E., Savulescu, L., Marechal, F., & Paris, J. (2011). Unified methodology for thermal energy efficiency improvement: Application to Kraft process. Chemical Engineering Science, 66(2), 135-151. Lien externe
Mehand, M. S., Srinivasan, B., & De Crescenzo, G. (2011). Estimation of analyte concentration by surface plasmon resonance-based biosensing using parameter identification techniques. Analytical Biochemistry, 419(2), 140-144. Lien externe
Méndez Portillo, L. S. (2011). Free-Radical Polymerization of Polystyrene Using Microreaction Technology [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Meng, Q., Heuzey, M.-C., Carreau, P., & De Kee, D. (mai 2011). Thermo-mechanical properties and thermal degradation control of poly (lactic acid) and poly (lactic acid)/clay/wood nanocomposites [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2011), Boston, MA, United states. Non disponible
Montastruc, L., Ajao, O. A., Marinova, M., & Domenech, S. (février 2011). Optimization of heat network in a biorefinery for furfural production [Communication écrite]. International Forest Biorefinery Symposium, Montréal, Québec. Non disponible
Montastruc, L., Ajao, O., Marinova, M., Barreto do Carmo, C., & Domenech, S. (2011). Hemicellulose biorefinery for furfural production : Energy requiemetn analysis and minimization. Journal of science & technology for forest products and processes, 1(3), 48-53. Non disponible
Moreau, V., Bage, G., Marcotte, D., & Samson, R. (2011). Modelling the inventory of hydropower plants. Dans Towards life cycle sustainability management (443-450). Lien externe
Moreno, M. J., Ajji, A., Mohebbi-Kalhori, D., Rukhlova, M., Hadjizadeh, A., & Bureau, M. (2011). Development of a compliant and cytocompatible micro-fibrous polyethylene terephthalate vascular scaffold. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 97 B(2), 201-214. Lien externe
Moshkelani, M., Marinova, M., & Paris, J. (mai 2011). La bioraffinerie forestière et son application dans l'industrie des pâtes et papiers [Communication écrite]. 79e Congrès de l'ACFAS, Sherbrooke. Non disponible
Moshkelani, M., Marinova, M., & Paris, J. (mars 2011). The forest biorefinery and its implementation in the pulp & paper industry [Communication écrite]. 2nd European conference on Polygeneration, Tarragona, Espagne. Non disponible
Moshkelani, M., Marinova, M., & Perrier, M. (octobre 2011). The integrated forest biorefinery and the greening of the pulp and paper industry [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible
Mostajeran Goortani, B., Mateos-Espejel, E., Moshkelani, M., & Paris, J. (2011). Energy efficiency improvement of a Kraft process through practical stack gases heat recovery. Applied Thermal Engineering, 31(17-18), 4091-4096. Lien externe
Naderi, G., Nekoomanesh, M., Mehtarani, R., & Eslami, H. (2011). Preparation of a new polypropylene/clay nanocomposites via in situ polymerization. E-Polymers, 11(016). Lien externe
Naderi, G., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P., & Dubois, C. (2011). Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide. Polymer Engineering and Science, 51(2), 278-284. Lien externe
Najafi Chaloupli, N. (2011). Development of Polylactide-Clay Nanocomposites for Food Packaging Applications [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Najarzadeh, Z., & Ajji, A. (mai 2011). Seal layer materials characterization in terms of crystallinity and rheology [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Non disponible
Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (2011). A 2D distributed model of transport phenomena in a porous media biodrying reactor. Drying Technology, 29(2), 153-162. Lien externe
Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (2011). Development and experimental evaluation of a 1D distributed model of transport phenomena in a continuous biodrying process for pulp and paper mixed sludge. Drying Technology, 29(2), 135-152. Lien externe
Noel, S., Liberelle, B., Robitaille, L., & De Crescenzo, G. (2011). Quantification of primary amine groups available for subsequent biofunctionalization of polymer surfaces. Bioconjugate Chemistry, 22(8), 1690-1699. Lien externe
Norouzi, H. R., Mostoufi, N., Mansourpour, Z., Sotudeh-Gharebagh, R., & Chaouki, J. (2011). Characterization of solids mixing patterns in bubbling fluidized beds. Chemical Engineering Research and Design, 89(6), 817-826. Lien externe
Olmiccia, J., Heniche, M., & Bertrand, F. (2011). A particulate method for determining residence time in viscous flow processes. Rheology, Mixing, and Flow of Polymeric Materials: Macromolecular Materials and Engineering, 296(3-4), 362-372. Lien externe
Ouaziz, G. (2011). Test accéléré de corrosion alternatif au brouillard salin selon la norme ASTM B117 [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ouyang, W., Buschmann, M. D., & Chevrier, A. (2011). Specific blood:chitosan mixing ratios producing a viscous paste-like implant with good handling properties for tissue repair. (Demande de brevet no WO2011060545). Lien externe
Pakravan, M., Heuzey, M.-C., & Ajji, A. (2011). A fundamental study of chitosan/PEO electrospinning. Polymer, 52(21), 4813-4824. Lien externe
Patel, J. D., Mighri, F., & Ajji, A. (2011). Rapid synthesis of highly dispersed and stable oleic acid capped lead sulphide nanoparticles. Advanced Science Letters, 4(11/12), 3644-3648. Lien externe
Patel, J., Mighri, F., & Ajji, A. (2011). Simple non-aqueous fabrication route for oleic acid capped luminescent cadmium sulphide quantum dots at relatively low temperature. Soft nanoscience letters, 1(3), 61-65. Lien externe
Patience, G. S., & Karirekinyana, G. (octobre 2011). Catmint Oil as a Strategy to Fight Malaria in Burundi, Africa [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible
Patience, G. S., Farrie, Y., Devaux, J.-F., & Dubois, J. L. (octobre 2011). Oxidation kinetics of Ce-doped, FePO4 catalyst coked during glycerol dehydration to acrolein [Communication écrite]. 1st International Congress on Catalysis for Biorefineries (CATBIOR 2011), Málaga, Spain. Non disponible
Perrault, M., Bertrand, F., & Chaouki, J. (2011). An experimental investigation of the effect of the amount of lubricant on tablet properties. Drug Development and Industrial Pharmacy, 37(2), 234-242. Lien externe
Petiot, E., Jacob, D., Lanthier, S., Lohr, V., Ansorge, S., & Kamen, A. A. (2011). Metabolic and Kinetic analyses of influenza production in perfusion HEK293 cell culture. BMC Biotechnology, 11(1), 84 (12 pages). Disponible
Pianet, G., Bertrand, F., Vidal, D., & Mallet, B. (2011). Discrete element method-based models for the consolidation of particle packings in paper-coating applications. Asia-Pacific Journal of Chemical Engineering, 6(1), 44-54. Lien externe
Pigeon, B., Perrier, M., & Srinivasan, B. (2011). Shaping probability density functions using a switching linear controller. Journal of Process Control, 21(6), 901-908. Lien externe
Pinto, R. P. (2011). Dynamic Modelling and Optimisation of Microbial Fuel Cells and Microbial Electrolysis Cells [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pinto, R. P., Srinivasan, B., Escapa, A., & Tartakovsky, B. (2011). Multi-Population Model of a Microbial Electrolysis Cell. Environmental Science and Technology, 45(11), 5039-5046. Lien externe
Pinto, R. P., Srinivasan, B., Uiot, S. R., & Tartakovsky, B. (2011). The effect of real-time external resistance optimization on microbial fuel cell performance. Water Research, 45(4), 1571-1578. Lien externe
Poh, J., Heniche, M., Fradette, L., Cunningham, M., & McKenna, T. (2011). Computational analysis of mixing and scale-up in emulsion polymerization reactors. Macromolecular Symposia, 302(1), 133-141. Lien externe
Poudelet, V. (2011). Opérationnalisation de l'analyse du cycle de vie pour le développement de nouveaux produits [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pujari, S., Dougherty, L., Mobuchon, C., Carreau, P., Heuzey, M.-C., & Burghardt, W. R. (2011). X-ray scattering measurements of particle orientation in a sheared polymer/clay dispersion. Rheologica Acta, 50(1), 3-16. Lien externe
Rafione, T., Ajao, O., Marinova, M., Radiotis, T., & Jemaa, N. (octobre 2011). Integration of a hemicelluloses-based biorefinery into a Canadian Kraft pulp mill : Material and energy analysis [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible
Rajabian, M., Naderi, G., Carreau, P., & Dubois, C. (2011). Erratum: Flow-induced particle orientation and rheological properties of suspensions of organoclays in thermoplastic resins. Journal of Polymer Science. Part B: Polymer Physics, 49(5), 398-398. Lien externe
Ravati, S., & Favis, B. D. (2011). 3D porous polymeric conductive material prepared using LbL deposition. Polymer, 52(3), 718-731. Lien externe
Rebai, M., Drolet, F., Vidal, D., Vadeiko, I., & Bertrand, F. (2011). A Lattice Boltzmann approach for predicting the capture efficiency of random fibrous media. Asia-Pacific Journal of Chemical Engineering, 6(1), 29-37. Lien externe
Renaud, E., Robelin, C., Gheribi, A. E., & Chartrand, P. (2011). Thermodynamic evaluation and optimization of the Li, Na, K, Mg, Ca, Sr // F, Cl reciprocal system. Journal of Chemical Thermodynamics, 43(8), 1286-1298. Lien externe
Robelin, C., & Chartrand, P. (2011). Corrigendum to "Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + ZnCl2) system" [J. Chem. Thermodyn. 43(3) (2011) 377-391] (DOI:10.1016/j.jct.2010.10.013). Journal of Chemical Thermodynamics, 43(12), 2015-2015. Lien externe
Robelin, C., & Chartrand, P. (mai 2011). Overview of the molten chlorides, fluorides and chloro-fluorides databases of the FactSage thermochemical software [Présentation]. Dans CALPHAD XL, Rio de Janeiro, Brazil. Non disponible
Robelin, C., & Chartrand, P. (2011). Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl 2 + CaCl2 + ZnCl2) system. Journal of Chemical Thermodynamics, 43(3), 377-391. Lien externe
Robelin, C., & Chartrand, P. (2011). A viscosity model for the (NaF+AlF3+CaF2+Al 2O3) electrolyte. Journal of Chemical Thermodynamics, 43(5), 764-774. Lien externe
Rosenbaum, R. K., Huijbregts, M. A. J., Henderson, A. D., Margni, M., McKone, T. E., van de Meent, D., Hauschild, M. Z., Shaked, S., Li, D. S., Gold, L. S., & Jolliet, O. (2011). USEtox human exposure and toxicity factors for comparative assessment of toxic emissions in life cycle analysis: sensitivity to key chemical properties. International Journal of Life Cycle Assessment, 16(8), 710-727. Lien externe
Saad, R., Margni, M., Koellner, T., Wittstock, B., & Deschênes, L. (2011). Assessment of land use impacts on soil ecological functions : Development of spatially differentiated characterization factors within a caandian context. International Journal of Life Cycle Assessment, 16(3), 198-211. Lien externe
Sanaei, S., & Stuart, P. R. (mai 2011). Techno-economic analysis of triticale-based biorefinery strategies [Communication écrite]. World Congress on Industrial Biotechnology and Bioprocessing (WCIBB 2011), Toronto, ON, Canada. Non disponible
Sanjuan-Galindo, R., Heniche, M., Ascanio, G., & Tanguy, P. A. (2011). CFD investigation of new helical ribbon mixers bottom shapes to improve pumping. Asia-Pacific Journal of Chemical Engineering, 6(1), 181-193. Lien externe
Santato, C., Cicoira, F., & Martel, R. (2011). Organic photonics : Spotlight on organic transistors. Nature Photonics, 5(7), 392-393. Lien externe
Sathiyanathan, K., Lee, R., Chesser, H., Dubois, C., Stowe, R., Farinaccio, R., & Ringuette, S. (2011). Solid propellant microthruster design for nanosatellite applications. Journal of Propulsion and Power, 27(6), 1288-1294. Lien externe
Sauriol, P. (2011). Hydrodynamique des jets de gaz orientés vers le haut et vers le bas dans les lits fluidisés gaz-solide [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Savadogo, O., & Oishi, K. (2011). Correlation between Basic Parameters of the Materials and the Electrocatalytic Properties of the ORR on Pd-Alloy Cathodes. ECS Meeting Abstracts, MA2011-01(42), 1957-1957. Lien externe
Séguineau de Préval, C., Devals, C., Bertrand, F., & Hayes, R. E. (septembre 2011). Towards the direct numerical simulationo of the structured catalytic reactor : Lattice Boltzmann simulation of laminar flow in a honeycomb monolith [Communication écrite]. 2nd International Symposium on Modeling of Exhaust-Gas After-Treatment (MODEGAT 2011), Karlsruhe, Germany. Non disponible
Shabanian, J., Fotovat, F., Bouffard, J., & Chaouki, J. (mai 2011). Fluidization behavior in a gas-solid fluidized bed with thermally induced inter-particle forces [Communication écrite]. 10th International Conference on Circulating Fluidiezed Beds and Fluidization Technology, Sunriver, Oregon. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (2011). Morphology and rheology of nonreactive and reactive EPDM/PP blends in transient shear flow: Plasticized versus nonplasticized blends. Rubber Chemistry and Technology, 84(3), 325-353. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (2011). Rheology/morphology relationship of plasticized and nonplasticized thermoplastic elastomers based on ethylene-propylene-diene-terpolymer and polypropylene. Polymer Engineering and Science, 51(11), 2314-2327. Lien externe
Shekari, A. (2011). N-Butane Partial Oxidation to Maleic Anhydride : Experimental and Kinetic Studies Under Transient Conditions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Shive, M. S., Buschmann, M. D., Yaroshinsky, A., Tamez-Pena, J., Schreyer, E., Totterman, S., Trattnig, S., Stanish, W. D., & Restrepo, A. (juin 2011). T2 MRI of repair cartilage reflects tissue quality by biopsies [Communication écrite]. 5th International Workshop on Osteoarthritis Imaging, Salzburg, Austria. Non disponible
Si Mehand, M., De Crescenzo, G., & Srinivasan, B. (août 2011). Using Parameter Estimation techniques for determining analyte concentration from surface plasmon resonance measurements [Communication écrite]. 18th World Congress of the International Federation of Automatic Control (IFAC 2011), Milano, Italy. Lien externe
Silverwood, R. J., & Ajji, A. (mai 2011). Development of an antibacterial film for application in the food industry [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Non disponible
Skekari, A., & Patience, G. S. (octobre 2011). n-Butane partial oxidation to maleic anhydride : a global transientkinetic model [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible
Sobhy, A., Farag, S., & Chaouki, J. (octobre 2011). Energy consumption in microwave pyrolysis of biomass [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ont.. Non disponible
Sobhy, A., Farag, S., & Chaouki, J. (février 2011). Microwave-assisted pyrolysis and gasification of waste biomass [Communication écrite]. International Forest Biorefinery Symposium, Montréal, Québec. Non disponible
Spreutels, L., Bertrand, F., Chaouki, J., Haut, B., & Legros, R. (septembre 2011). Experimental characterization and modelling of Baker's yeast activity and viability during convetnional drying [Communication écrite]. 1st European Congress of Applied Biotechnology, Berlin, Germany. Non disponible
Spreutels, L., Chaouki, J., Bertrand, F., Haut, B., & Legros, R. (octobre 2011). Radioactive characterization of the gas residence time distribution in spouted beds [Communication écrite]. 61st Annual CSChE Conference, London, Canada. Non disponible
Spreutels, L., Legros, R., Bertrand, F., Haut, B., & Chaouki, J. (septembre 2011). Radioactive characterization of gas-solid flows in a conical spouted be [Communication écrite]. 8th European Congress of Chemical Engineering, Berlin, Germany. Non disponible
Stobiac, V., Tanguy, P. A., & Bertrand, F. (juillet 2011). Lattice boltzmann simulation of industrial viscous mixing flows [Communication écrite]. 2011 High-Performance Computing Symposium, Montréal, Québec. Non disponible
Stobiac, V., Tanguy, P. A., & Bertrand, F. (juillet 2011). Lattice boltzmann simulation of industrial viscous mixing flows [Communication écrite]. 8th International Conference on Mesoscopic Methods in Engineering and Science, Lyon, France. Non disponible
Stoeffler, K., Lafleur, P., Perrin-Sarazin, F., Bureau, M., & Denault, J. (2011). Micro-mechanisms of deformation in polyethylene/clay micro- and nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(8), 916-927. Lien externe
Tabatabaei, S. H., & Ajji, A. (2011). Applications of biaxial stretched films. Dans Biaxial Stretching of Film: Principles and Applications (231-239). Lien externe
Tabatabaei, S. H., & Ajji, A. (2011). Effect of initial crystalline morphology on properties of polypropylene cast films. Journal of Plastic Film and Sheeting, 27(3), 223-233. Lien externe
Tabatabaei, S. H., & Ajji, A. (2011). Orientation, mechanical, and optical properties of poly (lactic acid) nanoclay composite films. Polymer Engineering and Science, 51(11), 2151-2158. Lien externe
Tabatabaei, S. H., & Ajji, A. (2011). Structure-orientation-properties relationships for polypropylene nanoclay composite films. Journal of Plastic Film and Sheeting, 27(1-2), 87-115. Lien externe
Tabatabaei, S. H., Ajji, A., & Ghasemi, H. (2011). Effect of Random and Block Copolypropylenes on Structure and Properties of Uniaxially and Biaxially Oriented PP Films. International Polymer Processing, 26(1), 82-90. Lien externe
Tamez-Pena, J., Trattnig, S., Szomolanyi, P., Totterman, S., Shive, M., Buschmann, M. D., & Restrepo, A. (juin 2011). A quantitative method for evaluating cartagile defect repair : intra and inter reader reproducibility [Communication écrite]. 5th International Workshop on Osteoarthritis Imaging, Salzburg, Austria. Non disponible
Tavares, J. R., & Coulombe, S. (2011). Dual plasma synthesis and characterization of a stable copper-ethylene glycol nanofluid. Powder Technology, 210(2), 132-142. Lien externe
Tavares, J. R., & Kaldas, A. (2011). Plasma arc waste destruction system for sludge oil (PAWDS-SO). (Rapport technique n° TR-2011-114). Non disponible
Tavares, J. R., Rao, L., Derboghossian, C., Carabin, P., Kaldas, A., Chevalier, P., & Holcroft, G. (2011). Large-scale plasma waste gasification. IEEE Transactions on Plasma Science, 39(11), 2908-2909. Lien externe
Tchoryk, C. (2011). Analyse de l'impact des incertitudes du procédé de bio-séchage sur sa viabilité économique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Thibault, M., Astolfi, M., Lavertu, M., Darras, M., & Buschmann, M. D. (mai 2011). The role and fate of excess polycations in efficient chitosan-based gene transfection [Communication écrite]. 14th Annual Meeting American Society of Gene and Cell Therapy, Seattle, WA. Non disponible
Thibault, M., Astolfi, M., Tran-Khanh, N., Lavertu, M., Darras, V., Merzouki, A., & Buschmann, M. D. (mai 2011). Excess polycation mediates efficient chitosan-based gene transfer by promoting lysosomal release of the polyplexes [Communication écrite]. 1st Meeting of Canadian Chapter of The Controlled Release Society, Montréal, Québec. Non disponible
Thibault, M., Astolfi, M., Tran-Khanh, N., Lavertu, M., Darras, V., Merzouki, A., & Buschmann, M. D. (2011). Excess polycation mediates efficient chitosan-based gene transfer by promoting lysosomal release of the polyplexes. Biomaterials, 32(20), 4639-4646. Lien externe
Thompson, W. T., Kaye, M. H., Bale, C. W., & Pelton, A. (2011). Pourbaix diagrams for multielement systems. Dans Uhlig's corrosion handbook (3e éd., 103-110). Lien externe
Thon, A., Püttmann, A., Hartge, E.-U., Heinrich, S., Werther, J., Patience, G. S., & Bockrath, R. E. (2011). Simulation of catalyst loss from an industrial fluidized bed reactor on the basis of labscale attrition tests. Powder Technology, 214(1), 21-30. Lien externe
Ung, B., Dupuis, A., Stoeffler, K., Dubois, C., & Skorobogatiy, M. A. (2011). High-refractive-index composite materials for terahertz waveguides: Trade-off between index contrast and absorption loss. Journal of the Optical Society of America B: Optical Physics, 28(4), 917-921. Lien externe
Valenzuela, E. E., & Savadogo, O. (2011). Nanostructured TiO₂ Doped with Nb as a Novel Support for PEM Fuel Cells. ECS Meeting Abstracts, MA2011-01(42), 1960-1960. Lien externe
Virgilio, N., & Favis, B. D. (2011). Self-assembly of Janus composite droplets at the interface in quaternary immiscible polymer blends. Macromolecules, 44(15), 5850-5856. Lien externe
Virgilio, N., Sarazin, P., & Favis, B. D. (2011). Ultraporous poly(l-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface. Polymer, 52(7), 1483-1489. Lien externe
Wang, W., Savadogo, O., & Ma, Z.-F. (2011). Titanium Oxy Nitride (TiON) Catalysts as Oxygen Electrode for Low and Medium Temperature Electrochemical Processes. ECS Meeting Abstracts, MA2011-01(42), 1959-1959. Lien externe
Xu, X. F., Ghanbari, A., Leelapornpisit, W., Heuzey, M.-C., & Carreau, P. (2011). Effect of ionomer on barrier and mechanical properties of PET/Organoclay nanocompoistes prepared by Melt compounding. International Polymer Processing, 26(4), 444-455. Lien externe
Xu, X.F., & Xu, X. F. (2011). Mechanical properties and deformation behaviors of acrylonitrile-butadiene- styrene under Izod impact test and uniaxial tension at various strain rates. Polymer Engineering and Science, 51(5), 902-907. Lien externe
Yaghmazadeh, O., Cicoira, F., Bernards, D. A., Yang, S. Y., Bonnassieux, Y., & Malliaras, G. G. (2011). Optimization of organic electrochemical transistors for sensor applications. Journal of Polymer Science, Part B: Polymer Physics, 49(1), 34-39. Lien externe
Yang, S. Y., Cicoira, F., Byrne, R., Benito-Lopez, F., Diamond, D., Owens, R. M., & Malliaras, G. G. (2011). Electrochemical transistors with ionic liquids for enzymatic sensing. Chemical Communications, 46(42), 7972-7974. Lien externe
Yang, S. Y., Cicoira, F., Byrne, R., Benito-Lopez, F., Diamond, D., Owens, R. M., & Malliaras, G. G. (août 2011). Electrochemical transistors with ionic liquids for enzymatic sensing [Affiche]. Organic Semiconductors in Sensors and Bioelectronics IV, USA (16 pages). Lien externe
Zarghami, R., Mostoufi, N., Sotudeh-Gharebagh, R., & Chaouki, J. (mai 2011). Nonlinear dynamic characteristics of bubbling fluidization [Communication écrite]. 10th International Conference on Circulating Fluidiezed Beds and Fluidization Technology, Sunriver, Oregon. Non disponible
