 | Monter d'un niveau |
Arreguin-Zavala, J., Vasilevskiy, D., Turenne, S., & Masut, R. A. (juillet 2012). Microwave sintering of Bi₂Te₃- and PbTe-based alloys: Structure and thermoelectric properties [Communication écrite]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Publié dans Journal of Electronic Materials, 42(7). Lien externe
Arreguin-Zavala, J., Turenne, S., Martel, A., & Benaissa, A. (2012). Microwave Sintering of MoSi₂-Mo₅Si₃ to Promote a Final Nanometer-Scale Microstructure and Suppressing of Pesting Phenomenon. Materials Characterization, 68, 117-122. Lien externe
Andre, C., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2011). Increase in the density of states in n-type extruded (Bi₍₁₋ₓ₎Sbₓ)₂(Te₍₁₋y₎Sey)₃ thermoelectric alloys. Journal of Physics D: Applied Physics, 44(23), 235401-235401. Lien externe
Andre, C., Vasilevskiy, D., Turenne, S., & Masut, R. A. (août 2008). Extruded bismuth-telluride-based n-type alloys for waste heat thermoelectric recovery applications [Communication écrite]. 27th International Conference on Thermoelectrics, Corvallis, Oregon. Publié dans Journal of Electronic Materials, 38(7). Lien externe
Bercegol, A., Christophe, V., Keshavarz, M. K., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2016). Hot extruded polycrystalline Mg₂Si with embedded XS₂ nano-particles (X: Mo, W). Journal of Electronic Materials, 46(5), 2668-2675. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2015). Temperature dependence of thermal conductivity in hybrid nanodispersions. RSC Advances, 5(4), 2768-2776. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., Lafleur, P., & Lebon, G. (2014). Effective heat conduction in dispersion of wires. Applied Physics Letters, 104(6), 063106-063106. Lien externe
Behrang, A., Grmela, M., Dubois, C., Lafleur, P., Lebon, G., & Turenne, S. (2014). Effective heat conduction in hybrid sphere & wire nanodispersions. Applied Physics Letters, 104(23), 233111-233111. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1). Lien externe
Brochu, M., & Turenne, S. (2004). Experimental method for determining densification function of metal powder and its validity. Powder Metallurgy, 47(1), 55-59. Lien externe
Beaulieu, A., Azzi, L., Ajersch, F., Turenne, S., Pineau, F., & Loong, C. A. (juin 2000). Numerical modeling and experimental analysis of die cast semi-solidA356 alloy [Communication écrite]. Merton C. Flemings Symposium on Solidification and Materials Processing, Cambridge, MA, USA. Non disponible
Carmona, J.-P., Birglen, L., Chaussée, J., Dervault, F., Deshaies, M., Boileau, E., & Turenne, S. (mai 2015). Topology optimization of a flap track support for additive manufacturing [Communication écrite]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec. Non disponible
Clin, T., Turenne, S., Vasilevskiy, D., & Masut, R. A. (août 2008). Numerical simulation of the thermomechanical behavior of extruded bismuth telluride alloy module [Communication écrite]. 27th International Conference on Thermoelectrics, Corvallis, Oregon. Publié dans Journal of Electronic Materials, 38(7). Lien externe
Demers, V., Fareh, F., Turenne, S., Demarquette, N. R., & Scalzo, O. (2018). Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding. Advanced Powder Technology, 29(1), 180-190. Lien externe
Demers, V., Demarquette, N. R., Turenne, S., & Scalzo, O. (2016). Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding. Advances in Materials Science and Engineering, 2016, 1-7. Disponible
Demers, V., Turenne, S., & Scalzo, O. (2015). Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy. Journal of Materials Science, 50(7), 2893-2902. Lien externe
Demers, V., Turenne, S., & Scalzo, O. (2015). Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques. Advanced Powder Technology, 26(3), 997-1004. Lien externe
Dickson, J. I., Turenne, S., Bailon, J.-P., & Vogt, J. B. (septembre 1987). The Formation of Ribbon-Like Extrusions and Intrusions During the Cyclic Deformation of Copper [Communication écrite]. 2nd International Symposium on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Munich, Germany. Lien externe
Dickson, J. I., Turenne, S., Vogt, J. B., & Bailon, J.-P. (août 1985). The Formation of Extrusions and Intrusions in Copper and in a Mild Steel [Communication écrite]. 7th International Conference on the Strength of Metals and Alloys (ICSMA 7), Montréal, Québec. Lien externe
Fareh, F., Demers, V., Demarquette, N. R., Turenne, S., & Scalzo, O. (2017). Influence of segregation on rheological properties of wax-based feedstocks. Powder Technology, 320, 273-284. Lien externe
Fareh, F., Demers, V., Turenne, S., & Scalzo, O. (décembre 2015). Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding [Communication écrite]. International Conference on Advanced Materials Engineering and Technology (ICAMET 2015), Kaohsiung, Taiwan. Lien externe
Hernandez, R., Polizu, S., Turenne, S., & Yahia, L. (2002). Characteristics of Porous Nickel-Titanium Alloys for Medical Applications. Bio-Medical Materials and Engineering, 12(1), 37-45. Lien externe
Inaekyan, K., Kreitcberg, A., Turenne, S., & Brailovski, V. (2019). Microstructure and mechanical properties of laser powder bed-fused IN625 alloy. Materials Science and Engineering A, 768, 13 pages. Lien externe
Julien, B., Ste-Marie, M., Pelletier, R., Lapointe, F., & Turenne, S. (juin 2010). Parametric modeling of MIM as-sintered properties of stainless steel 17-4PH and 316L using a statistical model [Communication écrite]. International Conference on Powder Metallurgy and Particulate Materials (PowderMet 2010), Hollywood, FL, United states. Non disponible
Kamalizadeh, S., Niknam, S. A., Balazinski, M., & Turenne, S. (2022). The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC. Metals, 12(11), 18 pages. Lien externe
Kreitcberg, A., Inaekyan, K., Turenne, S., & Brailovski, V. (2019). Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion. Journal of Manufacturing and Materials Processing, 3(3), 75 (18 pages). Disponible
Keshavarz, M. K., Lo, C.-W. T., Turenne, S., Mozharivskyj, Y., & Quitoriano, N. J. (2019). Hot Extrusion of ZnSb-Based Thermoelectric Materials; A Novel Approach for Scale-Up Production. Journal of Manufacturing and Materials Processing, 3(3), 58-58. Lien externe
Keshavarz, M. K., Turenne, S., & Bonakdar, A. (2018). Solidification behavior of inconel 713LC gas turbine blades during electron beam welding. Journal of Manufacturing Processes, 31, 232-239. Lien externe
Kreitcberg, A., Brailovski, V., & Turenne, S. (juin 2017). The build orientation-dependent ductility of IN625 alloy processed by laser powder-bed fusion [Communication écrite]. 14th International Conference on Fracture (ICF 2017), Rhodes, Greece. Non disponible
Kreitcberg, A., Brailovski, V., & Turenne, S. (2017). Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion. Materials Science and Engineering: A, 689, 1-10. Lien externe
Kreitcberg, A., Brailovski, V., & Turenne, S. (2017). Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion. Materials Science and Engineering A, 700, 540-553. Lien externe
Kreitcberg, A., Brailovski, V., Turenne, S., Chanal, C., & Urlea, V. (mai 2016). Influence of thermo- and HIP treatments on the microstructure and mechanical properties of IN625 alloy parts produced by selective laser melting: A comparative study [Communication écrite]. 9th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2016), Graz, Austria. Lien externe
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2016). Mechanical properties of bismuth telluride based alloys with embedded MoS2nano-particles. Materials & Design, 103, 114-121. Lien externe
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (juin 2013). Effect of suppression of grain growth of hot extruded (Bi 0.2Sb0.8)2Te3 thermoelectric alloys by MoS2 nanoparticles [Communication écrite]. International Conference on Thermoelectrics 2013, Kobe, Japan. Publié dans Journal of Electronic Materials, 43(6). Lien externe
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2014). Synthesis and characterization of bismuth telluride-based thermoelectric nanocomposites containing MoS2 nano-inclusions. Materials Characterization, 95, 44-49. Lien externe
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (juillet 2012). P-Type bismuth telluride based composite thermoelectric materials produced by mechanical alloying and hot extrusion [Communication écrite]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Publié dans Journal of Electronic Materials, 42(7). Lien externe
Kashi, S., Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (juillet 2011). Effect of Surface Preparation on Mechanical Properties of Ni Contacts on Polycrystalline (Bi₁₋ₓSbₓ)₂(Te₁₋y Sey)₃ Alloys [Communication écrite]. 30th International Conference on Thermoelectrics (ICT 2011), Traverse City, Michigan, USA. Publié dans Journal of Electronic Materials, 41(6). Lien externe
Lebel, L., Boukhili, R., & Turenne, S. (2018). Damage to an A-N720 ceramic matrix composite under simulated gas turbine static component conditions using laser heating. Journal of Composite Materials, 52(30), 4127-4138. Lien externe
Lebel, L., Turenne, S., & Boukhili, R. (2017). An experimental apparatus and procedure for the simulation of thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites. Journal of Engineering for Gas Turbines and Power, 139(9), 11 pages. Lien externe
Lebel, L., Turenne, S., & Boukhili, R. (mai 2015). Testing ceramic matrix composites for gas turbine combustion chamber panels [Communication écrite]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec. Non disponible
Lebel, L., Turenne, S., & Boukhili, R. (mai 2015). Thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites [Communication écrite]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec. Non disponible
Lapointe, F., Turenne, S., & Julien, B. (2009). Low viscosity feedstocks for powder injection moulding. Powder Metallurgy, 52(4), 338-344. Lien externe
Laplante, S., Legros, N., Ajersch, F., Clément, B., & Turenne, S. (janvier 1996). Extrusion of thixocast semi-solid A356-12SiCp cylindrical sections [Communication écrite]. 4th International Conference on Semi-Solid Processing of Alloys and Composites, Sheffield. Non disponible
Mouret, T., Upreti, K., Dewart, F., Scola, A., Pons, A., Marchais, A., Eberling-Fux, N., Queva, A., & Turenne, S. (2024). 3D observations of room temperature capillary infiltration mechanism in SiC compacts. Ceramics International, 50(7), 11871-11883. Lien externe
Marousi, M., Rimpault, X., Turenne, S., & Balazinski, M. (2023). Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC). Journal of Manufacturing Processes, 86, 208-220. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2021). Study of the effects of initial cutting conditions and transition period on ultimate tool life when machining inconel 718. Materials, 14(3), 592 (13 pages). Disponible
Masut, R. A., André, C., Vasilevskiy, D., & Turenne, S. (2020). Charge transport anisotropy in hot extruded bismuth telluride: Scattering by acoustic phonons. Journal of Applied Physics, 128(11), 10 pages. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404. Lien externe
Mohammadian, N., Turenne, S., & Brailovski, V. (2019). Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte. Journal of Manufacturing and Materials Processing, 3(4), 86 (20 pages). Disponible
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (décembre 2018). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Mohammadian, N., Turenne, S., & Brailovski, V. (2018). Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing. Journal of Materials Processing Technology, 252, 728-738. Lien externe
Martel, A., Arreguin-Zavala, J., Benaissa, A., Turenne, S., & Julien, B. (2012). Conventional and microwave sintering of MoSi₂ nanostructured powder : Powder and parts characterisation. Powder Metallurgy, 55(3), 206-211. Lien externe
Paques, M., Changeux, B., Das, A., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (mars 2023). Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4V [Communication écrite]. 152nd Annual Meeting and Exhibition of The Minerals, Metals and Materials Society (TMS 2023), San Diego, CA, USA. Lien externe
Prieto-Vargas, L., Turenne, S., Vasilevskiy, D., & Masut, R. A. (octobre 2013). Design optimization by numerical simulation of segmented-legs Bi 2Te3 based thermoelectric generator module [Communication écrite]. Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec. Non disponible
Picard, M., Turenne, S., Vasilevskiy, D., & Masut, R. A. (juillet 2012). Numerical simulation of performance and thermomechanical behavior of thermoelectric modules with segmented bismuth-telluride-based legs [Communication écrite]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Publié dans Journal of Electronic Materials, 42(7). Lien externe
Prokoshkin, S. D., Korotitskiy, A. V., Tamonov, A. V., Khmelevskaya, I. Y., Brailovski, V., & Turenne, S. (2006). Comparative X-Ray and Time-of-Flight Neutron Diffraction Studies of Martensite Crystal Lattice in Stressed and Unstressed Binary Ti-Ni Alloys. Materials Science and Engineering: A, 438, 549-552. Lien externe
Prokoshkin, S. D., Korotitskiy, A. V., Brailovski, V., Turenne, S., Khmelevskaya, I. Y., & Trubitsyna, I. B. (2004). On the Lattice Parameters of Phases in Binary Ti-Ni Shape Memory Alloys. ACTA Materialia, 52(15), 4479-4492. Lien externe
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, V., Trochu, F., Turenne, S., & Turilina, V. Y. (2004). Thermomechanical treatments and their influence on the microstructure and stress/strain diagrams of NiTi shape memory alloys. Canadian Metallurgical Quarterly, 43(1), 95-108. Lien externe
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, V., Trochu, F., Turenne, S., Turilina, V. Y., & Inaekyan, K. E. (juin 2002). Comparative study of structure and strain diagram changes in Ti-Ni alloys thermomechanically treated in martensitic or austenitic states [Communication écrite]. International Conference on Martensitic Transformations (ICOMAT 2002), Espoo, Finland. Publié dans Journal de physique. IV, 112. Lien externe
Prokoshkin, S. D., Brailovskii, V., Turenne, S., Khmelevskaya, I. Y., Korotitskii, A. V., & Trubitsyna, I. B. (2003). On the Lattice Parameters of the B19 ' Martensite in Binary Ti-Ni Shape-Memory Alloys. Physics of Metals and Metallography, 96(1), 55-64. Non disponible
Prokoshkin, S. D., Brailovski, V., Turenne, S., Khmelevskaya, I. Y., Korotitskiy, A. V., & Trubitsyna, I. B. (juin 2002). Concentration temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys [Communication écrite]. 10th International Conference on Martensitic Transformations (ICOMAT 2002), Espoo, Finlande. Publié dans Journal de physique. IV, 112. Lien externe
Prokoshkin, S. D., Turenne, S., Khmelevskaya, I. Y., Brailovski, V., & Trochu, F. (2000). Structural Mechanisms of High-Temperature Shape Changes in Titanium-Nickel Alloys After Low-Temperature Thermomechanical Treatment. Canadian Metallurgical Quarterly, 39(2), 225-233. Lien externe
Sadallah, A., Miao, H.-Y., Changeux, B., Bitar-Nehme, E., Chakraborty, A., Turenne, S., & Martin, É. (mars 2024). Effect of Shot Peening and High-Temperature Shot Peening on the High Cycle Fatigue of 7010-T7452 Aluminum Alloy [Communication écrite]. Light Metals 2024 (TMS 2024), Orlando, FL, USA. Lien externe
Sadallah, A., Changeux, B., Miao, H.-Y., Das, A., Turenne, S., & Martin, É. (mars 2023). Experimental Investigation of the Effect of High-Temperature Shot Peening on the Surface Integrity of 7010-T7452 Aluminum Alloy [Communication écrite]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. Lien externe
Scola, A., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). New liquid processing of oxide/oxide 3D wowen ceramic matrix composites. Journal of the American Ceramic Society, 102(6), 3256-3268. Lien externe
Scola, A., Podgorski, M., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). Novel device for in situ process characterization of oxide/oxide ceramic matrix composites fabricated by flexible injection. Journal of the American Ceramic Society, 102(5), 2337-2352. Lien externe
Scalzo, O., Turenne, S., Gauthier, M., & Brailovski, V. (2009). Mechanical and microstructural characterization of porous NiTi shape memory alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40(9), 2061-2070. Lien externe
Simard, J. M., Vasilevskiy, D., & Turenne, S. (août 2003). Influence of composition and texture on the thermoelectric and mechanical properties of extruded (Bi1-xSbx)2 (Te1-ySey)3 alloys [Communication écrite]. 22nd international conference on thermoelectrics (ICT 2003), La Grande Motte, France. Lien externe
Sacépé, N., Turenne, S., & Brailovski, V. (août 1999). Combined analysis of the assisted two-way shape memory effect in NiTi. [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Turcot, G., Paquet, D., Lévesque, M., & Turenne, S. (2021). A novel inverse methodology for the extraction of bulk elasto-plastic tensile properties of metals using spherical instrumented indentation. International Journal of Solids and Structures, 236-237, 20 pages. Lien externe
Turenne, S., Clin, T., Vasilevskiy, D., & Masut, R. A. (2010). Finite element thermomechanical modeling of large area thermoelectric generators based on bismuth telluride alloys. Journal of Electronic Materials, 39(9), 1926-1933. Lien externe
Turenne, S. (2003). Characterization of shape memory alloys. Dans Shape memory alloys: fundamentals, modeling and applications (131-178). Non disponible
Trochu, F., & Turenne, S. (2003). Fatigue and degradation. Dans Shape memory alloys: fundamentals, modeling and applications (311-342). Non disponible
Turenne, S., Bélanger, F., & Simard, J. M. (2003). PM trims costs and speeds production of sensor materials. Metal Powder Report, 58(7), 46-50. Lien externe
Turenne, S., Godère, C., & Thomas, Y. (2000). Effect of Temperature on the Behaviour of Lubricants During Powder Compaction. Powder Metallurgy, 43(2), 139-142. Lien externe
Turenne, S., Prokoshkin, S., Brailovski, V., & Sacépé, N. (2000). Mechanical and X-Ray Characterisation of the Assisted Two-Way Shape Memory Effect in Niti. Canadian Metallurgical Quarterly, 39(2), 217-224. Lien externe
Trochu, F., Sacépé, N., Volkov, O., & Turenne, S. (1999). Characterization of NiTi Shape Memory Alloys Using Dual Kriging Interpolation. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 275, 395-399. Lien externe
Turenne, S., Godère, C., Thomas, Y., & Mongeon, P. E. (1999). Evaluation of friction conditions in powder compaction for admixed and die wall lubrication. Powder Metallurgy, 42(3), 263-268. Lien externe
Turenne, S., Legros, N., Laplante, S., & Ajersch, F. (1999). Mechanical Behavior of Aluminum Matrix Composite During Extrusion in the Semisolid State. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(4), 1137-1146. Lien externe
Vasilevskiy, D., Turenne, S., & Masut, R. A. (2024). Self-contained calibration samples and measurements of the thermoelectric figure of merit: A method to improve accuracy. Journal of Applied Physics, 135(11), 0200082 (11 pages). Lien externe
Vasilevskiy, D., Keshavarz, M. K., Simard, J.-M., Masut, R. A., Turenne, S., & Snyder, G. J. (2018). Assessing the thermal conductivity of Cu2xSe alloys undergoing a phase transition via the simultaneous measurement of thermoelectric parameters by a Harman-based setup. Journal of Electronic Materials, 47(6), 3314-3319. Lien externe
Verdier, P., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2018). Microstructure and Thermoelectric Properties of Hot Extruded Sb-Doped Mg₂Si Using MoS₂ Nano-particles as Lubricant. Journal of Electronic Materials, 47(11), 6833-6841. Lien externe
Vasilevskiy, D., Masut, R. A., & Turenne, S. (2018). A Phenomenological Model of Unconventional Heat Transport Induced by Phase Transition in Cu2−xSe. Journal of Electronic Materials, 48(4), 1883-1888. Lien externe
Vasilevskiy, D., Simard, J. M., Caillat, T., Masut, R. A., & Turenne, S. (2016). Consistency of ZT-Scanner for Thermoelectric Measurements from 300 K to 700 K: A Comparative Analysis Using Si₈₀Ge₂₀ Polycrystalline Alloys. Journal of Electronic Materials, 45(3), 1540-1547. Lien externe
Vasilevskiy, D., Simard, J. M., Masut, R. A., & Turenne, S. (2016). Reduction of Specimen Size for the Full Simultaneous Characterization of Thermoelectric Performance. Journal of Electronic Materials, 46(5), 3007-3011. Lien externe
Vasilevskiy, D., Keshavarz, M. K., Dufourcq, J., Ihou-Mouko, H., Navonne, C., Masut, R. A., & Turenne, S. (septembre 2014). Bulk Mg₂Si based n-type thermoelectric material produced by gas atomization and hot extrusion [Communication écrite]. 12th European Conference on Thermoelectrics (ECT 2014), Madrid, Espagne. Publié dans Materials Today: Proceedings, 2(2). Lien externe
Vasilevskiy, D., Simard, J. M., Masut, R. A., & Turenne, S. (2015). System for Simultaneous Harman-Based Measurement of All Thermoelectric Properties, from 240 to 720 K, by Use of a Novel Calibration Procedure. Journal of Electronic Materials, 44(6), 1733-1742. Lien externe
Vasilevskiy, D., Masut, R. A., & Turenne, S. (juillet 2011). Thermoelectric and Mechanical Properties of Novel Hot-Extruded PbTe n-Type Material [Communication écrite]. 30th International Conference on Thermoelectrics (ICT 2011), Traverse City, Michigan, USA. Publié dans Journal of Electronic Materials, 41(6). Lien externe
Vasilevskiy, D., Bourbia, O., Gosselin, S., Turenne, S., & Masut, R. A. (2011). Nanostructure characterization of bismuth telluride-based powders and extruded alloys by various experimental methods. Journal of Electronic Materials, 40(5), 1046-1051. Lien externe
Vasilevskiy, D., Dawood, M. S., Masse, J.-P., Turenne, S., & Masut, R. A. (2010). Generation of nanosized particles during mechanical alloying and their evolution through the hot extrusion process in bismuth-telluride-based alloys. Journal of Electronic Materials, 39(9), 1890-1896. Lien externe
Vasilevskiy, D., Turenne, S., & Masut, R. A. (juillet 2008). Thermoelectric extruded alloys for module manufacturing : 10 years of development at École Polytechnique de Montréal [Communication écrite]. 5th European Conference on Thermoelectrics, Paris, France. Lien externe
Vasilevskiy, D., Roy, F., Renaud, E., Masut, R. A., & Turenne, S. (août 2006). Mechanical Properties of the Interface Between Nickel Contact and Extruded (Bi₁₋ₓSbₓ)₂(Te₁₋ySey)₃ [Communication écrite]. 25th International Conference on Thermoelectrics, Vienne, Autriche. Lien externe
Vasilevskiy, D., Semenyuk, V., & Turenne, S. (septembre 2005). Properties of cooling modules produced form (Bi,Sb)₂(Te,Se)₃ hot extruded alloys [Communication écrite]. 3rd European Conference on Thermoelectrics, Nancy, France. Non disponible
Vasilevskiy, D., Frechette, P., Turenne, S., & Masut, R. A. (juin 2005). Thermoelectric properties and transport phenomena in (Bi₁₋ₓSbₓ)₂(Te₁₋ySey)₃ quaternary n-type alloys produced by powder metallurgy and extrusion [Communication écrite]. 24th International Conference on Thermoelectrics (ICT 2005), Clemson, SC, USA. Lien externe
Vasilevskiy, D., Simard, J.-M., Bélanger, F., Bernier, F., Turenne, S., & L'Écuyer, J. (janvier 2002). Texture formation in extruded rods of (BiSb)₂(TeSe)₃ thermoelectric alloys [Communication écrite]. 21st International Conference on Thermoelectrics (ICT 2002), Long Beach, California, USA. Lien externe
