 | Monter d'un niveau |
Pierre LafleurDépartement de génie chimique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Arpin, B., Lafleur, P., & Sanschagrin, B. (1994). A personal computer software program for coathanger die simulation. Polymer Engineering and Science, 34(8), 657-664. Lien externe
Bautista-Del-Ángel, J. E., Morales-Cepeda, A. B., Lozano-Ramírez, T., Sanchez, S., Karami, S., & Lafleur, P. (2018). Enhancement of crystallinity and toughness of poly (L-lactic acid) influenced by Ag nanoparticles processed by twin screw extruder. Polymer Composites, 39(7), 2368-2376. Lien externe
Boudreault, Y., Carré, C., Farand, P., Forest, L., Lafleur, P., & Ross, A. (2017). Différentes méthodes d'apprentissage actif pour une diversité d'apprenants. Proceedings of the Canadian Engineering Education Association (CEEA), 5 pages. Disponible
Bautista-Del-Ángel, J., Morales-Cepeda, A. B., Lozano-Ramírez, T., Sanchez, S., Karami, S., & Lafleur, P. (2017). Mechanical and crystal enhancements to polylactide with silver-nanoparticle filler. Plastics Research online, 3 pages. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2015). Temperature dependence of thermal conductivity in hybrid nanodispersions. RSC Advances, 5(4), 2768-2776. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., Lafleur, P., & Lebon, G. (2014). Effective heat conduction in dispersion of wires. Applied Physics Letters, 104(6), 063106-063106. Lien externe
Behrang, A., Grmela, M., Dubois, C., Lafleur, P., Lebon, G., & Turenne, S. (2014). Effective heat conduction in hybrid sphere & wire nanodispersions. Applied Physics Letters, 104(23), 233111-233111. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1). Lien externe
Bailon, J.-P., Clément, B., & Lafleur, P. (juin 2005). Same course, two methods of learning: Assessment of the student's success [Communication écrite]. ASEE Annual Conference and Exposition, Pittsburgh, PA, United states. Lien externe
Berzin, F., Vergnes, B., Lafleur, P., & Grmela, M. (2002). A theoretical approach to solid filler dispersion in a twin-screw extruder. Polymer Engineering and Science, 42(3), 473-481. Lien externe
Beaumier, D., Lafleur, P., & Thibodeau, C. A. Streamline die design for complex geometries [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Bories, M., Huneault, M. A., & Lafleur, P. (mai 1999). Effect of compounding conditions on the dispersion of highly filled calcium carbonate/pp compounds in twin-screw extruders [Communication écrite]. Antec '99.Volume 1, New York City, USA. Lien externe
Castillo, J., Lozano, T., Garcia, R., Morales-Zamudio, L., Lopez-Barroso, J., Lafleur, P., Karami, S., Sanchez-Valdes, S., Martinez-Colunga, G., Rodriguez, F., Perez-Berumen, C., Flores, S., & Garcia, A. (2020). Influence of graphene-based compounds on the mechanical toughness and thermal stability of polypropylene. Journal of Applied Polymer Science, 137(10), 48258 (13 pages). Lien externe
Camacho, P. H., Morales-Cepeda, A. B., Salas-Papayanopolos, H., Bautista, J. E., Castro, C., Lozano, T., Sanchez-Valdes, S., & Lafleur, P. (2017). Crystallization behavior of polypropylene/silver nanocomposites using polyethylene glycol as reducing agent and interface modifier. Journal of Thermoplastic Composite Materials, 30(5), 662-677. Lien externe
Carreau, P., Ghaneh-Ford, A., & Lafleur, P. (avril 1998). Rheological effects in film blowing [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1998). Lien externe
Del Angel, C., Morales, A. B., Navarro-Pardo, F., Lozano, T., Lafleur, P., Sanchez-Valdes, S., Martinez-Colunga, G., Ramirez-Vargas, E., Alonso, S., & Zitzumbo, R. (2015). Mechanical and rheological properties of polypropylene/bentonite composites with stearic acid as an interface modifier. Journal of Applied Polymer Science, 132(30). Lien externe
Dubois, C., Lafleur, P., Roy, C., Brousseau, P., & Stowe, R. A. (2007). Polymer-Grafted Metal Nanoparticles for Fuel Applications. Journal of Propulsion and Power, 23(4), 651-658. Lien externe
Doyon, J.-F., Lafleur, P., Carreau, P., & Vergnes, B. (mai 1994). Recycling of polyolefins: processability and degradation [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Eslami, H., Grmela, M., Dubois, C., & Lafleur, P. (2010). Melt rheology of biodegradable poly[(butylene succinate)-co-adipate]: Experimental and model predictions. Journal of polymer science. Part B, Polymer physics, 48(8), 832-839. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (2009). Correlation between different microstructural parameters and tensile modulus of various polyethylene blown films. Polymer Engineering and Science, 47(9), 1430-1440. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (2007). Investigation on the Structure and Properties of Different Pe Blown Films. International Polymer Processing, 22(4), 334-345. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (mai 2006). Correlations of tensile modulus for polyethylene blown films with microstructural parameters [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (2005). Correlation between structural parameters and property of PE blown films. Journal of Plastic Film & Sheeting, 21(4), 281-305. Lien externe
Fang, Y., Carreau, P., Lafleur, P., & Ymmel, S. (2005). Properties of MLLDPE/LDPE blends in film blowing. Polymer Engineering and Science, 45(3), 343-353. Lien externe
Fatahi, S., Ajji, A., & Lafleur, P. (mai 2005). Structure-property correlations for pe blown films [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
Fang, Y., Carreau, P., & Lafleur, P. (2005). Thermal and rheological properties of MLLDPE/LDPE blends. Polymer Engineering and Science, 45(9), 1254-1264. Lien externe
Fang, Y. L., Carreau, P., & Lafleur, P. (2003). Rheological Effects of Polyethylenes in Film Blowing. Polymer Engineering and Science, 43(7), 1391-1406. Lien externe
Gonzalez, L., Lafleur, P., Lozano, T., Morales, A. B., Garcia, R., Angeles, M., Rodriguez, F., & Sanchez, S. (2014). Mechanical and thermal properties of polypropylene/montmorillonite nanocomposites using stearic acid as both an interface and a clay surface modifier. Polymer Composites, 35(1), 1-9. Lien externe
Gamache, E., Agassant, J. F., Demay, Y., & Lafleur, P. (2005). Evaluation of stresses in a two-layer co-extruded LDPE melt blown film. Journal of Plastic Film & Sheeting, 21(2), 127-144. Lien externe
Godfroy, P. G., Huneault, M. A., & Lafleur, P. (mai 1999). Effect of pp-gma on properties of talc filled polypropylene [Communication écrite]. Antec '99. Volume III, New York City, USA. Lien externe
Grmela, M., & Lafleur, P. (1998). Kinetic Theory and Hydrodynamics of Rigid Body Fluids. Journal of Chemical Physics, 109(16), 6956-6972. Lien externe
Grmela, M., Ait-Kadi, A., & Lafleur, P. (1998). Suspensions of Fibers in Viscoelastic Fluids: Rheology. Journal of Chemical Physics, 109(16), 6973-6981. Lien externe
Ghanehfard, A., Carreau, P., & Lafleur, P. (1997). On-line birefringence measurement in film blowing of a linear low density polyethylene. International Polymer Processing, 12(2), 136-146. Lien externe
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (1997). Study of kinematics and dynamics of film blowing of different polyethylenes. Polymer Engineering and Science, 37(7), 1148-1163. Lien externe
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (mai 1995). Application of birefringence to film blowing [Communication écrite]. 53rd Annual Technical Conference, Boston, MA. Publié dans Journal of Plastic Film & Sheeting, 12(1). Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (1996). Study of instabilities in film blowing. AICHE Journal, 42(5), 1388-1396. Lien externe
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (mai 1996). Study of kinematics and dynamics of film blowing of a linear low density polyethylene [Communication écrite]. 54th Annual Technical Conference, Indianapolis, IN, USA. Non disponible
Hernandez, Y., Lozano, T., Morales, A. B., Navarro-Pardo, F., Lafleur, P., Sanchez-Valdes, S., Martinez-Colunga, G., Morales-Zamudio, L., & de Lira-Gomez, P. (2017). Improvement of toughness properties of polypropylene filled with nanobentonite using stearic acid as interface modifier. Journal of Composite Materials, 51(3), 373-380. Lien externe
Hashemi, S. A., Sahraian, R., Lafleur, P., & Stoeffler, K. (2006). Focus Ion Beam Preparation of Transmission Electron Microscope Sample in Polymer Clay Nanocomposite. Iranian Polymer Journal, 15(7), 539-545. Lien externe
Huneault, M. A., Godfroy, P. G., & Lafleur, P. (1999). Performance of Talc/Ethylene-Octene Copolymer Polypropylene Blends. Polymer Engineering and Science, 39(6), 1130-1138. Lien externe
Huneault, M. A., Godfroy, P. G., & Lafleur, P. (avril 1998). Effect of compounding conditions and composition on the performance of talc/ethylene-octene copolymer/polypropylene blends (tpo) [Communication écrite]. Antec '98. Volume I, Atlanta, Ga. Lien externe
Huneault, M. A., Godfroy, P., & Lafleur, P. (octobre 1997). Effect of compounding conditions and composition on the performance of talc/ethylene-octene copolymer/polypropylene blends (tpo) [Communication écrite]. Polyblends '97, Boucherville, Qc. Non disponible
Huneault, M. A., Lafleur, P., & Carreau, P. (1996). Evaluation of the fan technique for profile die design. International Polymer Processing, 11(1), 50-57. Lien externe
Karami, S., & Lafleur, P. (2017). Effect of strain-induced molecular ordering on mechanical performance and barrier properties of polylactide nanocomposites. Journal of Polymer Science, Part B: Polymer Physics, 55(24), 1865-1876. Lien externe
Karami, S., & Lafleur, P. (2016). Toughening of polylactide nanocomposites with an ethylene alkyl acrylate copolymer: Effects of the addition of nanoparticles on phase morphology and fracture mechanisms. Polymer Engineering & Science, 56(12), 1415-1424. Lien externe
Karami, S., & Lafleur, P. (2015). Role of chain dynamics and topological confinements in cold crystallization of PLA-clay nanocomposites. Polymer Engineering and Science, 55(6), 1310-1320. Lien externe
Kim, S., Fang, Y., Lafleur, P., & Carreau, P. (2004). Dynamics and criteria for bubble instabilities in a single layer film blowing extrusion. Polymer Engineering and Science, 44(2), 283-302. Lien externe
Kay, D., Carreau, P., Lafleur, P., Robert, L., & Vergnes, B. (2003). A Study of the Stick-Slip Phenomenon in Single-Screw Extrusion of Linear Polyethylene. Polymer Engineering and Science, 43(1), 78-90. Lien externe
Lafleur, P., & Vergnes, B. (2014). Extrusion des polymères. Lien externe
Lujan-Acosta, R., Sanchez-Valdes, S., Ramirez-Vargas, E., Ramos-DeValle, L. F., Espinoza-Martinez, A. B., Rodriguez-Fernandez, O. S., Lozano-Ramirez, T., & Lafleur, P. (2014). Effect of Amino alcohol functionalized polyethylene as compatibilizer for LDPE/EVA/clay/flame-retardant nanocomposites. Materials Chemistry and Physics, 146(3), 437-445. Lien externe
Lafleur, P., & Vergnes, B. (2014). Polymer extrusion. Lien externe
Lozano, T., Morales, A. B., Lafleur, P., Córdova, F. J. C., Laria, J., Salas, H., Barragán, R., & Pichardo, R. (2012). Beta phase formation of polypropylene with bentonite filler. Química Hoy, 2(2), 14-17. Disponible
Lozano, T., Laria, J., Lafleur, P., Sanchez-Valdes, S., Rodriguez-Gonzalez, F., & Morales-Cepeda, A. B. (2012). Beta phase in polypropylene induced by shear in a single-screw extruder. Polymer Engineering and Science, 52(8), 1672-1677. Lien externe
Lafleur, P., Boudreault, Y., & Prégent, R. (juin 2008). Meeting the challenge of reviewing eleven engineering programs [Communication écrite]. ASEE Annual Conference and Exposition, Pittsburgh, PA, United states. Lien externe
Lozano, T., Lafleur, P., Grmela, M., & Thibodeau, C. (2004). Effect of Filler Dispersion on Polypropylene Morphology. Polymer Engineering and Science, 44(5), 880-890. Lien externe
Lozano, T., Lafleur, P., Grmela, M., & Vergnes, B. (2003). Modeling Filler Dispersion Along a Twin-Screw Extruder. International Polymer Processing, 18(1), 12-19. Lien externe
Lozano, T., Lafleur, P., & Grmela, M. (2002). A Chemical Model for the Dispersion of Fillers in a Polymeric Matrix. Canadian Journal of Chemical Engineering, 80(6), 1135-1142. Lien externe
Laffargue, J., Parent, L., Lafleur, P., Carreau, P., Demay, Y., & Agassant, J. F. (2002). Investigation of Bubble Instabilities in Film Blowing Process. International Polymer Processing, 17(4), 347-353. Lien externe
Lafleur, P., Berzin, F., Grmela, M., Vergnes, B., & Tremblay, S. R. (mai 2000). Simulation of CaCo₃ dispersion in a pp matrix during twin screw extrusion [Communication écrite]. Antec 2000, Orlando, FL. Lien externe
Lafleur, P., Bories, M., & Huneault, M. A. (1999). Effect of twin-screw extruder design and process conditions on ultrafine CaCO₃ dispersion into PP. International Polymer Processing, 14(3), 234-240. Lien externe
Lafleur, P., Gamache, E., Peiti, C., & Vergnes, B. (1999). Measurement of the coefficient of dynamic friction at extrusion processing conditions. Polymer Engineering and Science, 39(9), 1604-1613. Lien externe
Lafleur, P., Carreau, P., & Ghaneh-Fard, A. (septembre 1998). In-line birefringence measurements on film blowing of polyolefins [Communication écrite]. International Symposium on Orientation of Polymers, Boucherville, Qc.. Non disponible
Lafleur, P., Arpin, B., & Lenir, V. (1994). Computer aided design of wire coating dies. Advances in Polymer Technology, 13(4), 297-304. Lien externe
Martinez-Colunga, J. G., Sanchez-Valdes, S., Blanco-Cardenas, A., Ramirez-Vargas, E., Ramos-de Valle, L. F., Benavides-Cantu, R., Espinoza-Martinez, A. B., Sanchez-Lopez, S., Lozano-Ramirez, T., Lafleur, P., & Karami, S. (2018). Dispersion and exfoliation of nanoclays in itaconic acid func[t]ionalized LDPE by ultrasound treatment. Journal of Applied Polymer Science, 135(20), 10 pages. Lien externe
Muñoz-Ávila, J. M., Sánchez-Valdes, S., Yáñez-Flores, I., Rodriguez-Fernandez, O. S., Neira-Velázquez, M. G., Hernández-Hernández, E., Flores-Gallardo, S., Avalos-Belmontes, F., Lozano-Ramirez, T., Morales-Cepeda, A., & Lafleur, P. (2018). Influence of carbon nanofiber functionalization and compatibilizer on the physical properties of carbon nanofiber reinforced polypropylene nanocomposites. Polymer Composites, 39(10), 3575-3585. Lien externe
Morales-Cepeda, A. B., Ponce-Medina, M. E., Salas-Papayanopolos, H., Lozano, T., Zamudio, M., & Lafleur, P. (2015). Preparation and characterization of candelilla fiber (Euphorbia antisyphilitica) and its reinforcing effect in polypropylene composites. Cellulose, 22(6), 3839-3849. Lien externe
Martinez-Colunga, J. G., Sanchez-Valdes, S., Ramos-Devalle, L. F., Munoz-Jimenez, L., Ramirez-Vargas, E., Ibarra-Alonso, M. C., Lozano-Ramirez, T., & Lafleur, P. (2014). Simultaneous polypropylene functionalization and nanoclay dispersion in PP/Clay nanocomposites using ultrasound. Journal of Applied Polymer Science, 131(16). Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2013). Morphology Evolution and Thermomechanical Characteristics of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Rubber Chemistry and Technology, 86(4), 521-537. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2012). The Effects of Nanoclay Dispersion Levels and Processing Parameters on the Dynamic Vulcanization of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Polymer Engineering and Science, 52(5), 1099-1110. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2010). The effect of compatibilizer on the co-continuity and nanoclay dispersion level of tpe nanocomposites based on PP/EPDM. Polymer Engineering and Science, 50(11), 2131-2142. Lien externe
Malik, T. M., Carreau, P. J., Lafleur, P., & Fisa, B. (1991). Effect of filler treatment on the rheological and mechanical properties of polyethylene composites. Chemical Engineering Communications, 105(1), 11-25. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Effect of chemical and physical branching on rheological behavior of polylactide. Journal of Rheology, 59(4), 1045-1063. Lien externe
Nouri, S., Lafleur, P., & Dubois, C. (2015). Enhanced film blowing of polylactide by incorporating branched chains and stereocomplex crystals. International Polymer Processing, 30(4), 500-510. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Homocrystal and stereocomplex formation behavior of polylactides with different branched structures. Polymer (United Kingdom), 67, 227-239. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Synthesis and characterization of polylactides with different branched architectures. Journal of Polymer Science, Part B: Polymer Physics, 53(7), 522-531. Lien externe
Naderi, G., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P., & Dubois, C. (2011). Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide. Polymer Engineering and Science, 51(2), 278-284. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2008). The Influence of Matrix Viscosity and Composition on the Morphology, Rheology, and Mechanical Properties of Thermoplastic Elastomer Nanocomposites Based on Epdm/Pp. Polymer Composites, 29(12), 1301-1309. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2007). Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on EPDM/PP (Rheology & Morphology). International Polymer Processing, 22(3), 284-292. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2007). Microstructure-Properties Correlations in Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on PP/EPDM. Polymer Engineering and Science, 47(3), 207-217. Lien externe
Ponce-Medina, M. E., Sánchez-Valdés, S., Ángeles-San Martin, M. E., Salas-Papayanopolos, H., Hernández-Hernández, D. E., Lozano-Ramirez, T., Karami, S., Lafleur, P., & Morales-Cepeda, A. B. (2018). Composites of polypropylene/Candelilla fiber (Euphorbia antisyphilitica): Synergic of wax-polypropylene grafted Maleic anhydride. Cogent Engineering, 5(1), 1526861 (14 pages). Disponible
Pérez-Rocha, D., Morales-Cepeda, A. B., Navarro-Pardo, F., Lozano-Ramírez, T., & Lafleur, P. (2015). Carbon Fiber Composites of Pure Polypropylene and Maleated Polypropylene Blends Obtained from Injection and Compression Moulding. International Journal of Polymer Science, 2015, 1-8. Disponible
Rajabian, M., Naderi, G., Dubois, C., & Lafleur, P. (2010). Measurements and Model Predictions of Transient Elongational Rheology of Polymeric Nanocomposites. Rheologica Acta, 49(1), 105-118. Lien externe
Rajabian, M., Naderi, G., Beheshty, M. H., Lafleur, P., Dubois, C., & Carreau, P. (2008). Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows. International Polymer Processing, 23(1), 110-118. Lien externe
Roy, C., Dubois, C., Lafleur, P., & Brousseau, P. (décembre 2003). The dispersion and polymer coating of ultrafine aluminium powders by the Ziegler-Natta reaction [Communication écrite]. Synthesis, Characterization and Properties of Energetic/ Reactive Nanomaterials Symposium, Boston, MA, USA. Lien externe
Rollin, A., Montgrain, F., Lafleur, P., & Maranda, L. The influence of the welding parameters for hdpe geomembranes [Communication écrite]. 6th International Conference on Geosynthetics. Non disponible
Salas-Papayanopolos, H., Morales-Cepeda, A. B., Wood-Adams, P., Sanchez, S., Lafleur, P., & Vazquez, H. P. (2022). Crystallization effect of poly(L-lactic acid)/silver nanocomposites blends, on barrier and mechanical properties using glyceryl triacetate as plasticizer. Polymer Bulletin, 80(5), 5273-5290. Lien externe
Sanchez-Valdes, S., Zapata-Dominguez, A. G., Martinez-Colunga, J. G., Mendez-Nonell, J., de Valle, L. F. R., Espinoza-Martinez, A. B., Morales-Cepeda, A., Lozano-Ramirez, T., Lafleur, P., & Ramirez-Vargas, E. (2018). Influence of functionalized polypropylene on polypropylene/graphene oxide nanocomposite properties. Polymer Composites, 39(4), 1361-1369. Lien externe
Sánchez-Valdes, S., Zapata-Dominguez, A. G., Graciano-Verdugo, A. Z., Ramos de Valle, L. F., Morales-Cepeda, A., Ramírez-Vargas, E., Rodriguez-Fernandez, O. S., Lozano-Ramírez, T., Flores-Gallardo, S., Espinoza-Martinez, A. B., Méndez-Nonell, J., Lafleur, P., & Karami, S. (2018). Influence of modified polyethylene compatibilizer on filler dispersion and flammability characteristics of linear low density polyethylene/cyclo olefin copolymer blends containing flame retardant combinations. Journal of Adhesion Science and Technology, 32(14), 1560-1577. Lien externe
Salas-Papayanopolos, H., Morales-Cepeda, A., Sanchez, S., Lafleur, P., & Gomez, I. (2017). Synergistic effect of silver nanoparticle content on the optical and thermo-mechanical properties of poly(L-lactic acid)/glycerol triacetate blends. Polymer Bulletin, 74(12), 4799-4814. Lien externe
Soni, P., Ruiz, E., Lozano, T., Morales, A. B., Lafleur, P., Martínez, G., & Sánchez, S. (2014). Mejoramiento de la Tenacidad de Polipropileno con nanopartículas de Carbonato de Calcio. Química Hoy, 4(4), 5 pages. Disponible
Stoeffler, K., Lafleur, P., Perrin-Sarazin, F., Bureau, M., & Denault, J. (2011). Micro-mechanisms of deformation in polyethylene/clay micro- and nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(8), 916-927. Lien externe
Stoeffler, K., Lafleur, P., Perrin-Sarazin, F., & Denault, J. (mai 2010). Deformation and fracture mechanisms in polyethylene / clay nanocomposites [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA. Lien externe
Stoeffler, K., Lafleur, P., & Denault, J. (2008). The Effect of Clay Dispersion on the Properties of Lldpe/Lldpe-G-Mah/Montmorillonite Nanocomposites. Polymer Engineering and Science, 48(12), 2459-2473. Lien externe
Stoeffler, K., Lafleur, P., & Denault, J. (2008). Effect of Intercalating Agents on Clay Dispersion and Thermal Properties in Polyethylene/Montmorillonite Nanocomposites. Polymer Engineering and Science, 48(8), 1449-1466. Lien externe
Stoeffler, K., Lafleur, P., & Denault, J. (2008). Thermal Decomposition of Various Alkyl Onium Organoclays: Effect on Polyethylene Terephthalate Nanocomposites' Properties. Polymer Degradation and Stability, 93(7), 1332-1350. Lien externe
Stoeffler, K., Lafleur, P., & Denault, J. (mai 2007). Polyethylene nanocomposites based on high thermal stability organoclays [Communication écrite]. ANTEC 2007, Cincinnati, OH, United States. Lien externe
Stoeffler, K., Lafleur, P., & Denault, J. (mai 2006). Thermal properties of polyethylene nanocomposites based on different organoclays [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe
Sepehr, M., Carreau, P., Grmela, M., Ausias, G., & Lafleur, P. (2004). Comparison of Rheological Properties of Fiber Suspensions With Model Predictions. Journal of Polymer Engineering, 24(6), 579-610. Lien externe
Schmidt, F. M., Lafleur, P., Berthet, F., & Devos, P. (1999). Numerical Simulation of Resin Transfer Molding Using Linear Boundary Element Method. Polymer Composites, 20(6), 725-732. Lien externe
Torres-Castillo, C. S., Fuentes-Agustín, J. E., García-Reyes, E. M., Zamudio-Aguilar, M. A. M., Morales-Zamudio, L., Lozano, T., Navarro-Pardo, F., Sanchez-Valdez, S., Martinez-Colunga, G., Karami, S., & Lafleur, P. (2022). Effect of non-functionalized and functionalized graphene oxide with a silane agent on the thermal and rheological properties of nylon 6,6. Iranian Polymer Journal, 32(2), 139-149. Lien externe
Thibodeau, C. A., & Lafleur, P. Computer design and screw optimization [Communication écrite]. ANTEC : Annual Technical Conference. Society of Plastics Engineers. Lien externe
Tremblay, S. R., Lafleur, P., & Ait-Kadi, A. (2000). Effects of injection parameters on fiber attrition and mechanical properties of polystyrene molded parts. Journal of injection molding technology, 4(1), 1-7. Lien externe
Tremblay, S. R., Lafleur, P., & Ait-Kadi, A. (mai 1999). Effects of injection parameters on fiber attrition and mechanical properties of polystyrene molded parts [Communication écrite]. Antec '99.Volume 1, New York City, USA. Lien externe
Wang, X., Carreau, P., & Lafleur, P. (mai 1994). Entrance pressure loss and extrudate roughness during hdpe extrusion [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1994), San Francisco, Ca.. Non disponible
Wang, X., Clément, B., Carreau, P., & Lafleur, P. (1994). Extrudate roughness of HDPE and LLDPE : Determination of key parameters using screening design. Polymer Engineering and Science, 34(13), 1047-1055. Lien externe
Yousefi, A., Lafleur, P., & Gauvin, R. (1997). The effects of cobalt promoter and glass fibers on the curing behavior of unsaturated polyester resin. Journal of vinyl and additive technology, 3(2), 157-169. Lien externe
Yousefi, A., Lafleur, P., & Gauvin, R. (1997). Kinetic studies of thermoset cure reactions: a review. Polymer Composites, 18(2), 157-168. Lien externe
Yousefi, A., Lafleur, P., & Gauvin, R. (1997). Numerical analysis of promoted polyester and vinylester reinforced composites in rtm molds. Polymer Engineering and Science, 37(5), 757-771. Lien externe
Yousefi, A., Lafleur, P., & Gauvin, R. (mai 1995). Effects of cobalt promoter and glass fiber on the curing behavior of unsaturated polyester resin [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Zhang, Z., & Lafleur, P. (2008). Investigation of Ldpe Blown Film Instability Induced by Air Cooling. Polymer Engineering and Science, 48(8), 1504-1510. Lien externe
Zhang, Z., & Lafleur, P. (2007). A Study of Heat Transfer in the Blown Film Process. Journal of Plastic Film & Sheeting, 23(4), 297-317. Lien externe
Zhang, Z., Lafleur, P., & Bertrand, F. (2006). Effect of Aerodynamics on Film Blowing Process. International Polymer Processing, 21(5), 527-535. Lien externe
Zhang, Z., & Lafleur, P. (mai 2006). The effect of cooling air aerodynamics on bubble instability in blown film [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe
Zhijie, Z., & Lafleur, P. (mai 2005). Study on aerodynamics of cooling in film blowing [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe
