 | Monter d'un niveau |
Frederick GosselinDépartement de génie mécanique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Berthet, L., Blais, P., Nennemann, B., Monette, C., & Gosselin, F. (2025). Mode split prediction for rotating disks with flexible stator coupling. Journal of Fluids and Structures, 132, 18 pages. Lien externe
Lamoureux, D., Audefroy, C., Labzour, O. T., Houde, S., & Gosselin, F. (2024). Evaluating flow-added damping on a hydrofoil by combining vibro-acoustics and doublet-lattice panel analyses. Flow, 4, 20 pages. Lien externe
Boukor, M., Choimet, A., Laurendeau, É., & Gosselin, F. (2024). Flutter limitation of drag reduction by elastic reconfiguration. Physics of Fluids, 36(2), 021915 (11 pages). Lien externe
Rishmawi, S., Rodriguez, S., Chinesta, F., & Gosselin, F. (2024). Harmonic-modal hybrid frequency approach for parameterized non-linear. Computers & Structures, 301, 107461 (14 pages). Lien externe
Villié, A., Vanzulli, M. C., Zerpa, J. M. P., Vétel, J., Étienne, S., & Gosselin, F. (2024). Modeling vortex-induced vibrations of branched structures by coupling a 3D-corotational frame finite element formulation with wake-oscillators. Journal of Fluids and Structures, 125, 104074 (22 pages). Lien externe
Sushitskii, V., Miao, H. Y., Lévesque, M., & Gosselin, F. (2024). Segmentation of peen forming patterns using k-means clustering. Journal of Manufacturing Processes, 119, 867-877. Lien externe
Sushitskii, V., Dubois, P.-O., Miao, H. Y., Lévesque, M., & Gosselin, F. (2024). Simulation and automation of aluminum panel shot peen forming. International Journal of Material Forming, 17(3), 21-21. Lien externe
Jean, R. J. M., Braun, O., Monnette, C., Nennemann, B., & Gosselin, F. (mai 2023). Acoustic-structure interaction in disk-disk configurations in water for high head pump-turbines [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Dollon, Q., Ghorbani, E., & Gosselin, F. (mai 2023). Bayesian-based system identification of a tilting pad journal bearing under colored excitation [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Labzour, O. T., Karbasian, H. R., Houde, S., & Gosselin, F. (mai 2023). Combining reduced-order modeling and PINNs to model fluid-structure interactions [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Serroud, S., Ghorbani, E., & Gosselin, F. (mai 2023). Design of a vertical axis rotating machine test-bench and numerical modelling [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Duchesne, O., Lessard, D., Therriault, D., & Gosselin, F. (mai 2023). Design optimization and 3D printing of a sandwich panel for a lunar rover frame [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Lamoureux, D., Audefroy, C., Tazi-Labzour, O., Houde, S., & Gosselin, F. (mai 2023). Evaluating flow-added damping of hydrofoils by combining vibro-acoustics and doublet-lattice panel analyses [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Ghorbani, E., Rishmawi, S., & Gosselin, F. (mai 2023). A hybrid Kalman filtering and proper generalized decomposition algorithm for real-time identification of partial differential governing equation systems [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Rishmawi, S., Rodríguez, S., Gosselin, F., & Chinesta, F. (mai 2023). Hybrid MB-DEIM approach for parametrized nonlinear dynamics of a vertical axis rotating machine [Communication écrite]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Boukor, M., Laurendeau, É., & Gosselin, F. (mai 2023). The limit to drag reduction by elastic reconfiguration due to dynamical instability [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Garon, J., Routier, A.-L., Mélançon, D., & Gosselin, F. (mai 2023). Morphogenesis through mechanical instabilities : wrinkles and ruffles formation during the growth of kelp blades [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Quenedey, E., Ruchonnet, N., Nennemann, B., Monette, C., & Gosselin, F. (mai 2023). Numerical estimation of the leakage flow force coefficients of a Francis turbine runner for shaft-line dynamics [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Berthet, L., Karbasian, H. R., Blais, B., & Gosselin, F. (mai 2023). Physics-informed neural network-based modeling of the static reconfiguration of a plate under fluid flow [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Miao, H., Demenois, M., & Gosselin, F. (mai 2023). A PINN-based digital parameter identification of the pipe conveying fluid systems [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Villié, A., Vanzulli, M. C., Zerpa, J. M. P., Vétel, J., Étienne, S., & Gosselin, F. (mai 2023). Soft corals vortex-induced dynamics : experimental and numerical study [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Abda, M., & Gosselin, F. (mai 2023). Time-invariant hp-variational physics informed neural network to solve the pipe conveying fluid equation [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Collet, L., Rodrigues da Silveira, S., Kierzkowski, D., Routier-Kierzkowska, A.-L., & Gosselin, F. (mai 2023). Unveiling of tissue-level forces in plants using finite elements [Communication écrite]. Canadian Society for Mechanical Engineering International Congress, Sherbrooke, QC, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Bidhendi, A. J., Lampron, O., Gosselin, F., & Geitmann, A. (2023). Cell geometry regulates tissue fracture. Nature Communications, 14(1), 8275 (13 pages). Lien externe
Sushitskii, V., van Rees, W. M., Lévesque, M., & Gosselin, F. (2023). Determination of Optimal Shot Peen Forming Patterns Using the Theory of Non-Euclidean Plates. Journal of Manufacturing Science and Engineering-Transactions of the Asme, 145(3), 031006 (15 pages). Lien externe
Demenois, M., Miao, H. Y., & Gosselin, F. (2023). Easy to build, modular and large scale pipe conveying fluid experimental setup. HardwareX, 15, e00460 (30 pages). Lien externe
Yan Miao, H., Levesque, M., & Gosselin, F. (2023). Eigenstrain-based analysis of why uniformly shot peened aluminium plates bend more in the rolling direction. Strain, 22 pages. Lien externe
Ledoux, T., Anne, F., Béguin, C., Gosselin, F., & Étienne, S. (juin 2023). An experimental study on vortex induced motion of a submerged cylindrical buoy with a short tether chain [Communication écrite]. ASME 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), Univ Melbourne, Melbourne, AUSTRALIA (10 pages). Lien externe
Bonnet, B., Tabiai, I., Rakovich, G., Gosselin, F., & Villemure, I. (2022). Air leaks: Stapling affects porcine lungs biomechanics. Journal of the Mechanical Behavior of Biomedical Materials, 125, 104883 (15 pages). Lien externe
Gosselin, F., Zou, S., & Therriault, D. (juillet 2022). Bioinspired transparent impact-absorbing composite made with a fluid mechanical instability [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Non disponible
Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2022). Closed-loop shot peen forming with in-process measurement and optimization. CIRP Journal of Manufacturing Science and Technology, 38, 500-508. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). How a ball free to orbit in a circular track mitigates the galloping of a square prism. Nonlinear Dynamics, 111(1), 179-197. Lien externe
Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2022). A low-cost open-source automated shot peen forming system. HardwareX, 11, e00263 (13 pages). Lien externe
Raynaud, G., Houde, S., & Gosselin, F. (2022). ModalPINN: An extension of physics-informed Neural Networks with enforced truncated Fourier decomposition for periodic flow reconstruction using a limited number of imperfect sensors. Journal of Computational Physics, 464, 18 pages. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). Multi-ball rotative nonlinear energy sink for galloping mitigation. Journal of Sound and Vibration, 526, 8 pages. Lien externe
Faucheux, P. A., Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Peen forming and stress peen forming of rectangular 2024-T3 aluminium sheets: Curvatures, natural curvatures and residual stresses. Strain, 58(2), e12405 (24 pages). Lien externe
Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP Journal of Manufacturing Science and Technology, 36, 67-77. Lien externe
Zou, S., Therriault, D., & Gosselin, F. (2021). Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths. Extreme Mechanics Letters, 43, 101208 (9 pages). Disponible
Boudina, M., Gosselin, F., & Étienne, S. (janvier 2021). Soft corals vibrating under flow to improve food capture? [Résumé]. Annual Meeting of the Society-for-Integrative-and-Comparative-Biology (SICB 2021). Publié dans Integrative and Comparative Biology, 61(Supplement). Lien externe
Boudina, M., Gosselin, F., & Étienne, S. (2021). Vortex-induced vibrations: A soft coral feeding strategy? Journal of Fluid Mechanics, 916, A50 (26 pages). Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2021). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink. Journal of Fluids and Structures, 100, 103169 (13 pages). Lien externe
Zou, S., Therriault, D., & Gosselin, F. (2020). Spiderweb-inspired, transparent, impact-absorbing composite. Cell Reports Physical Science, 1(11), 100240 (17 pages). Disponible
Bonnet, B., Tabiai, I., Rakovich, G., Gosselin, F., & Villemure, I. (2020). Additional data for "Air leaks: stapling affects porcine lungs biomechanics" [Ensemble de données]. Lien externe
Boudina, M., Gosselin, F., & Étienne, S. (2020). Direct interception or inertial impaction? A theoretical derivation of the efficiency power law for a simple and practical definition of capture modes. Physics of Fluids, 32(12), 123603 (9 pages). Lien externe
Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2020). Efficient planning of peen-forming patterns via artificial neural networks. Manufacturing Letters, 25, 70-74. Lien externe
Louyot, M., Nennemann, B., Monette, C., & Gosselin, F. (2020). Modal analysis of a spinning disk in a dense fluid as a model for high head hydraulic turbines. Journal of Fluids and Structures, 94, 20 pages. Lien externe
Selwanis, M., Rishmawi, S., Franzini, G., Béguin, C., & Gosselin, F. (2020). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink [Ensemble de données]. Lien externe
Bidhendi, A. J., Altartouri, B., Gosselin, F., & Geitmann, A. (2019). Mechanical stress initiates and sustains the morphogenesis of wavy leaf epidermal cells. Cell Report, 28(5), 1237-1250.e6. Disponible
Siguerdidjane, W., Khameneifar, F., Gosselin, F., & Levasseur, G. (mars 2019). A deep learning approach to solving the peen forming inverse problem [Résumé]. APS March Meeting 2019, Boston, Massachusetts. Publié dans Bulletin of the American Physical Society, 64(2). Lien externe
Gosselin, F. (2019). Mechanics of a plant in fluid flow. Journal of Experimental Botany, 70(14), 3533-3548. Lien externe
Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Demande de brevet no US20190284423). Lien externe
Zou, S., Therriault, D., & Gosselin, F. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), 9777-9785. Disponible
Faucheux, P. A., Gosselin, F., & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, 135-144. Disponible
Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). Lien externe
Cossin, M., Ross, A., & Gosselin, F. (2018). Repeatability of force signals in aerial circus straps. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 232(3), 225-235. Lien externe
Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. Lien externe
Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Disponible
Bodkhe, S., Testoni, O., Gosselin, F., & Therriault, D. (octobre 2017). 3D printing active piezoelectric sensors in a single step [Communication écrite]. 8th New Mech, Boston, MA, USA. Non disponible
Hassani, M., Laurin, S. M., Mureithi, N. W., & Gosselin, F. (2017). Bending and torsional reconfiguration of chiral rods under wind and gravity. Extreme Mechanics Letters, 13, 91-99. Lien externe
Faucheux, P. A., Gosselin, F., & Lévesque, M. (septembre 2017). Computing peening patterns for peen forming and distortion correction [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Non disponible
Gosselin, F., Zou, S., & Therriault, D. (août 2017). Failure mechanisms of instability-assisted 3D printed microstructured fibers [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Lien externe
Zou, S., Zulkifli, H. Z., Therriault, D., & Gosselin, F. (juillet 2017). Failure mechanisms of poly(lactic acid) fibers featuring microstructured sacrificial bonds [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Zou, D., Therriault, D., & Gosselin, F. (septembre 2017). Finite element simulation of microstructured fibers with sacrificial bonds [Communication écrite]. International conference in aerospace for young scientists (ICAYS 2017), Beijing, China. Non disponible
Cossin, M., Ross, A., & Gosselin, F. (2017). Making single-point aerial circus disciplines safer. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231(4), 362-373. Lien externe
Gauthier, J. P., Giroux, A. M., Étienne, S., & Gosselin, F. (2017). A numerical method for the determination of flow-induced damping in hydroelectric turbines. Journal of Fluids and Structures, 69, 341-354. Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (avril 2017). One-step piezoelectric sensors for smart textiles [Communication écrite]. 15th Expo Hightex, Montréal, Québec. Non disponible
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (juillet 2017). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Gauthier, J. P., Giroux, A. M., Étienne, S., & Gosselin, F. (juillet 2016). CFD evaluation of added damping due to fluid flow over a hydroelectric turbine blade [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Lien externe
Bodkhe, S., Gosselin, F., & Therriault, D. (août 2016). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Hassani, M., Mureithi, N. W., & Gosselin, F. (2016). Large coupled bending and torsional deformation of an elastic rod subjected to fluid flow. Journal of Fluids and Structures, 62, 367-383. Lien externe
Zou, S., Therriault, D., & Gosselin, F. (août 2016). Unfolding process of coiling fibers fabricated by instability-assisted fused deposition modeling [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Lalande, V., Gosselin, F., Vonthron, M., Conan, B., Tremblay, C., Beaudoin, G., Soulez, G., & Martel, S. (2015). In vivo demonstration of magnetic guidewire steerability in a MRI system with additional gradient coils. Medical Physics, 42(2), 969-969. Lien externe
Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. (2015). Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds. Advanced Materials, 27(24), 3676-3680. Lien externe
Boulle, A., Dube, M., & Gosselin, F. (2015). Parametric study of an elliptical fuselage made of a sandwich composite structure. Mechanics Research Communications, 69, 129-135. Lien externe
Bodkhe, S., Gosselin, F., & Therriault, D. (juillet 2015). Three-dimensional printing of polyvinylidene fluoride nanocomposites [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
Gosselin, F., Neetzow, P., & Paak, M. (2014). Buckling of a beam extruded into highly viscous fluid. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 90(5). Lien externe
Passieux, R., Therriault, D., & Gosselin, F. (novembre 2014). Creation of Sacrificial Bonds by Viscous Flow Instability [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe
Gosselin, F., & Paidoussis, M. P. (2014). Dynamical stability analysis of a hose to the sky. Journal of Fluids and Structures, 44, 226-234. Lien externe
Gosselin, F., & Neetzow, P. (mars 2014). Propulsion at low Reynolds number via beam extrusion [Communication écrite]. APS March Meeting 2014, Denver, Colorado. Publié dans Bulletin of the American Physical Society, 59. Non disponible
Bodkhe, S., Gosselin, F., & Therriault, D. (novembre 2014). Three-dimensional structures with polyvinylidene fluoride [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec. Non disponible
Guo, S., Gosselin, F., Guérin, N., Lanouette, A.-M., Heuzey, M.-C., & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), 4118-4122. Disponible
Gosselin, F., Therriault, D., & Lévesque, M. (février 2012). Microfabrication of a spider-silk analogue through the liquid rope coiling instability [Communication écrite]. APS March Meeting, Boston, MA, USA. Lien externe
Gosselin, F., Lalande, V., & Martel, S. (2011). Characterization of the deflections of a catheter steered using a magnetic resonance imaging system. Medical Physics, 38(9), 4994-5002. Lien externe
Gosselin, F., & De Langre, E. (2011). Drag reduction by reconfiguration of a poroelastic system. Journal of Fluids and Structures, 27(7), 1111-1123. Lien externe
Gosselin, F., Zhou, D., Lalande, V., Vonthron, M., & Martel, S. (septembre 2011). Miniature ferromagnetic robot fish actuated by a clinical magnetic resonance scanner [Communication écrite]. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2011), San Francisco, CA, United states. Lien externe
Lalande, V., Gosselin, F., & Martel, S. (août 2010). Catheter steering using a Magnetic Resonance Imaging system [Communication écrite]. 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2010), Buenos Aires, Argentina. Lien externe
Gosselin, F., & De Langre, E. (août 2010). Drag Reduction of Filaments and Poroelastic Bodies by Non-Linear Deformation [Communication écrite]. 7th International Symposium on Fluid-Structure Interactions, Flow-Sound Interactions, and Flow-Induced Vibration and Noise, Montréal, Québec. Lien externe
Gosselin, F., De Langre, E., & Machado-Almeida, B. A. (2010). Drag reduction of flexible plates by reconfiguration. Journal of Fluid Mechanics, 650(1), 319-341. Lien externe
Dupont, S., Gosselin, F., Py, C., De Langre, E., Hemon, P., & Brunet, Y. (2010). Modelling waving crops using large-eddy simulation: comparison with experiments and a linear stability analysis. Journal of Fluid Mechanics, 652, 5-44. Lien externe
Bringout, G., Lalande, V., Gosselin, F., & Martel, S. (août 2010). Safety evaluation of magnetic catheter steering with upgraded magnetic resonance imaging system [Communication écrite]. 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2010), Buenos Aires, Argentina. Lien externe
Gosselin, F., & Païdoussis, M. P. (2009). Blocking in the rotating axial flow in a corotating flexible shell. Journal of Applied Mechanics, 76(1), 11001-11001. Lien externe
Gosselin, F., & de Langre, E. (2009). Destabilising effects of plant flexibility in air and aquatic vegetation canopy flows. European Journal of Mechanics-B/Fluids, 28(2), 271-282. Lien externe
Gosselin, F. (2009). Mécanismes d'interactions fluide-structure entre écoulements et végétation [Thèse de doctorat, École Polytechnique (Université Paris-Saclay)]. Lien externe
Gosselin, F., Païdoussis, M. P., & Misra, A. K. (2007). Stability of a deploying/extruding beam in dense fluid. Journal of Sound and Vibration, 299(1-2), 123-142. Lien externe
