 | Monter d'un niveau |
Charles DuboisDépartement de génie chimique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Sadek, R., Sharawi, M. S., Dubois, C., Tantawy, H., & Chaouki, J. (2023). Reduced Graphene Oxide/Barium Ferrite Ceramic Nanocomposite Synergism for High EMI Wave Absorption. ACS Omega, 8(17), 15099-15113. Lien externe
Fahd, A., Baranovsky, A., Dubois, C., Chaouki, J., Elbasuney, S., & Shokry, S. (2023). Thrust characteristics of nano-carbon/Al/oxygenated salt nanothermites for micro-energetic applications. Defence Technology, 15 pages. Lien externe
Fahd, A., Dubois, C., Chaouki, J., & Wen, J. Z. (2022). Combustion behaviour and reaction kinetics of GO/Al/oxidizing salts ternary nanothermites. Journal of Thermal Analysis and Calorimetry, 147(19), 10245-10257. Lien externe
Comtois, E., Dubois, C., & Favis, B. D. (2022). Linear burning rate of double base propellant containing Azidodeoxycellulose. Journal of Energetic Materials, 40(2), 136-152. Lien externe
Chimeni-Yomeni, D., Fazli, A., Dubois, C., & Rodrigue, D. (2022). Low density polyethylene composites based on flax fibers modified by a combination of coupling agent. Polymer Engineering & Science, 62(11), 3553-3565. Lien externe
Sadek, R., Sharawi, M. S., Dubois, C., Tantawy, H., & Chaouki, J. (2022). Superior quality chemically reduced graphene oxide for high performance EMI shielding materials. RSC Advances, 12(35), 22608-22622. Lien externe
Chimeni-Yomeni, D., Faye, A., Rodrigue, D., & Dubois, C. (2021). Behavior of polyethylene composites based on hemp fibers treated by surface-initiated catalytic polymerization. Polymer Composites, 42(5), 2334-2348. Lien externe
Fahd, A., Zorainy, M. Y., Dubois, C., Boffito, D. C., Chaouki, J., & Wen, J. Z. (2021). Combustion characteristics of EMOFs/oxygenated salts novel thermite for green energetic applications. Thermochimica Acta, 704, 11 pages. Lien externe
Comtois, E., Favis, B. D., & Dubois, C. (2021). Linear Burning Rate and Erosivity Properties of Nitrocellulose Propellant Formulations Plasticized by Glycidyl Azide Polymer and Nitroglycerine. Propellants, Explosives, Pyrotechnics, 46(3), 494-504. Lien externe
Massart, M., Dubois, C., & Boileau, M. (2021). Mechanical properties and morphology of modified celluloid foams. Journal of Applied Polymer Science, 138(21), 10 pages. Lien externe
Fahd, A., Baranovsky, A., Dubois, C., Chaouki, J., & Wen, J. Z. (2021). Superior performance of quaternary NC/GO/Al/KClO4 nanothermite for high speed impulse small-scale propulsion applications. Combustion and Flame, 232, 13 pages. Lien externe
Fahd, A., Dubois, C., Chaouki, J., Wen, J. Z., & Youssef, E. (2021). Synthesis and Characterization of Tertiary Nanothermite CNMs/Al/KClO4 with Enhanced Combustion Characteristics. Propellants, Explosives, Pyrotechnics, 46(6), 995-1005. Lien externe
Comtois, E., Favis, B. D., & Dubois, C. (2020). Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine. Polymer Engineering and Science, 60(9), 2301-2313. Lien externe
St-Charles, J.-C., & Dubois, C. (2020). Preparation of Azido Polycarbonates via Bulk Polymerization of Halogenated Diols. Propellants, Explosives, Pyrotechnics, 45(6), 889-897. Lien externe
St-Charles, J.-C., & Dubois, C. (2020). Thermal and Mechanical Properties of Triazole Cross-Linked Glycidyl Azide (GAP) and Azido Polycarbonate Networks. Propellants, Explosives, Pyrotechnics, 45(11), 1780-1789. Lien externe
Bagheriasl, D., Safdari, F., Carreau, P., Dubois, C., & Riedl, B. (2019). Development of cellulose nanocrystal-reinforced polylactide: A comparative study on different preparation methods. Polymer Composites, 40(S1), E342-E349. Lien externe
Araya-Marchena, M., St-Charles, J.-C., & Dubois, C. (2019). Investigations on Non-isocyanate Based Reticulation of Glycidyl Azide Pre-polymers. Propellants, Explosives, Pyrotechnics, 44(6), 769-775. Lien externe
Paran, S. M. R., Naderi, G., Shokoohi, S., Ebadati, J., & Dubois, C. (2019). Mechanical and Thermal Properties of Green Thermoplastic Elastomer Vulcanizate Nanocomposites Based on Poly (vinyl chloride) and Nitrile Butadiene Rubber Containing Organoclay and Rice Straw Natural Fibers. Journal of Polymers and the Environment, 27(9), 2017-2026. Lien externe
Esmizadeh, E., Arjmandpour, M., Vahidifar, A., Naderi, G., & Dubois, C. (2019). Preparation and characterization of silicone rubber/graphene nanosheets nanocomposites by in-situ loading of the coupling agent. Journal of Composite Materials, 53(24), 3459-3468. Lien externe
Lavoie, J., Petre, C. F., Durand, S., & Dubois, C. (2019). Stability and performance of gun propellants incorporating 3,6-dihydrazino-s-tetrazine and 5-aminotetrazolium nitrate. Journal of Hazardous Materials, 363, 457-463. Lien externe
Nakhaei, M. R., Mostafapour, A., Dubois, C., Naderi, G., & Reza Ghoreishy, M. H. (2019). Study of morphology and mechanical properties of PP/EPDM/clay nanocomposites prepared using twin-screw extruder and friction stir process. Polymer Composites, 40(8), 3306-3314. Lien externe
Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Effect of carbon nanotube on PA6/ECO composites: Morphology development, rheological, and thermal properties. Journal of Applied Polymer Science, 135(12), 9 pages. Lien externe
Bagheriasl, D., Carreau, P., Riedl, B., & Dubois, C. (2018). Enhanced properties of polylactide by incorporating cellulose nanocrystals. Polymer Composites, 39(8), 2685-2694. Lien externe
Lavoie, J., Petre, C. F., & Dubois, C. (2018). Erosivity and performance of nitrogen-rich propellants. Propellants Explosives Pyrotechnics, 43(9), 879-892. Lien externe
Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs. Engineering Fracture Mechanics, 200, 251-262. Lien externe
Sahraeian, R., Esmizadeh, E., Esfandeh, M., Naderi, G., & Dubois, C. (2018). Hybrid effect of nanoperlite and nanoclay on mechanical and rheological properties of low-density polyethylene. Journal of Polymer & Composites, 6(1), 32-41. Lien externe
Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Multiscale modeling of polymer systems comprising nanotube-like inclusions by considering interfacial debonding under plastic deformations. Composite Structures, 194, 302-315. Lien externe
Chimeni, D. Y., Dubois, C., & Rodrigue, D. (2018). Polymerization compounding of hemp fibers to improve the mechanical properties of linear medium density polyethylene composites. Polymer Composites, 39(8), 2860-2870. Lien externe
Chimeni, D. Y., Hirschberg, V., Dubois, C., & Rodrigue, D. (2018). Rheological behavior of composites made from linear medium-density polyethylene and hemp fibers treated by surface-initiated catalytic polymerization. Rheologica Acta, 57(6-7), 445-457. Lien externe
Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018). Simulation of Heat Transfer in Heat Sealing of Multilayer Polymeric Films: Effect of Process Parameters and Material Properties. Industrial & Engineering Chemistry Research, 57(43), 14571-14582. Lien externe
Lavoie, J., Petre, C.-F., Paradis, P.-Y., & Dubois, C. (2017). Burning Rates and Thermal Behavior of Bistetrazole Containing Gun Propellants. Propellants, Explosives, Pyrotechnics, 42(2), 149-157. Lien externe
Pontes Lima, R. J., Dubois, C., Stowe, R., & Ringuette, S. (2017). Enhanced reactivity of aluminum powders by capping with a modified glycidyl azide polymer. International Journal of Energetic Materials and Chemical Propulsion, 15(6), 481-500. Lien externe
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Lien externe
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Lien externe
Afzalabadi, A., Poorfar, A. K., Bidabadi, M., Moghadasi, H., Hochgreb, S., Rahbari, A., & Dubois, C. (2017). Study on hybrid combustion of aero-suspensions of boron-aluminum powders in a quiescent reaction medium. Journal of Loss Prevention in the Process Industries, 49(B), 645-651. Lien externe
Chimeni, D. Y., Dubois, C., & Rodigue, D. (2017). Surface-initiated catalytic polymerization of hemp fibers. Plastics Research online, 3 pages. Lien externe
Bagheriasl, D., Carreau, P. J., Riedl, B., Dubois, C., & Hamad, W. Y. (2016). Shear rheology of polylactide (PLA)–cellulose nanocrystal (CNC) nanocomposites. Cellulose, 23(3), 1885-1897. Lien externe
Chimeni, D. Y., Toupe, J. L., Dubois, C., & Rodrigue, D. (2016). Effect of hemp surface modification on the morphological and tensile properties of linear medium density polyethylene (LMDPE) composites. Composite Interfaces, 23(5), 405-421. Lien externe
Trowell, K. A., Wang, J., Wang, Y., Yavor, Y., Goroshin, S., Bergthorson, J. M., Frost, D. L., St-Charles, J. C., & Dubois, C. (2016). Effect of particle coating on the thermal response of mixtures of micro- and nano-aluminum particles with water. Journal of Thermal Analysis and Calorimetry, 127(1), 1027-1036. Lien externe
Chimeni, D. Y., Toupe, J. L., Dubois, C., & Rodrigue, D. (2016). Effect of surface modification on the interface quality between hemp and linear medium-density polyethylene. Journal of Applied Polymer Science, 133(32), 9 pages. Lien externe
Sanhye, W., Dubois, C., Laroche, I., & Pelletier, P. (2016). Numerical modeling of the cooling cycle and associated thermal stresses in a melt explosive charge. AICHE Journal, 62(10), 3797-3811. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Effect of chemical and physical branching on rheological behavior of polylactide. Journal of Rheology, 59(4), 1045-1063. Lien externe
Nouri, S., Lafleur, P., & Dubois, C. (2015). Enhanced film blowing of polylactide by incorporating branched chains and stereocomplex crystals. International Polymer Processing, 30(4), 500-510. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Homocrystal and stereocomplex formation behavior of polylactides with different branched structures. Polymer (United Kingdom), 67, 227-239. Lien externe
Labonte, M., & Dubois, C. (2015). Processing of Impact Modifed PLA in a Continous Process at High Speed: Comparison with PET Molding Conditions - A New Era. Polymer-Plastics Technology and Engineering, 54(4), 368-374. Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (2015). Properties of polypropylene and polypropylene/poly(ethylene-co-vinyl alcohol) blend/CNC nanocomposites. Composites Science and Technology, 117, 357-363. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Synthesis and characterization of polylactides with different branched architectures. Journal of Polymer Science, Part B: Polymer Physics, 53(7), 522-531. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2015). Temperature dependence of thermal conductivity in hybrid nanodispersions. RSC Advances, 5(4), 2768-2776. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., Lafleur, P., & Lebon, G. (2014). Effective heat conduction in dispersion of wires. Applied Physics Letters, 104(6), 063106-063106. Lien externe
Behrang, A., Grmela, M., Dubois, C., Lafleur, P., Lebon, G., & Turenne, S. (2014). Effective heat conduction in hybrid sphere & wire nanodispersions. Applied Physics Letters, 104(23), 233111-233111. Lien externe
Ebrahimpour, O., Dubois, C., & Chaouki, J. (2014). Fabrication of mullite-bonded porous SiC ceramics via a sol-gel assisted in situ reaction bonding. Journal of the European Ceramic Society, 34(2), 237-247. Lien externe
Mendez-Portillo, L. S., Dubois, C., & Tanguy, P. A. (2014). Free-radical polymerization of styrene using a split-and-recombination (SAR) and multilamination microreactors. Chemical Engineering Journal, 256, 212-221. Lien externe
Ebrahimpour, O., Dubois, C., & Chaouki, J. (2014). Manufacturing process for in situ reaction-bonded porous SiC ceramics using a combination of graft polymerization and sol-gel approaches. Industrial and Engineering Chemistry Research, 53(45), 17604-17614. Lien externe
Ebrahimpour, O., Esmaeili, B., Griffon, L., Chaouki, J., & Dubois, C. (2014). Novel fabrication route for porous silicon carbide ceramics through the combination of in situ polymerization and reaction bonding techniques. Journal of Applied Polymer Science, 131(13). Lien externe
Ebrahimpour, O., Chaouki, J., & Dubois, C. (2013). Diffusional effects for the oxidation of SiC powders in thermogravimetric analysis experiments. Journal of Materials Science, 48(12), 4396-4407. Lien externe
Esmaeili, B., Dubois, C., Carreau, P., & Heuzey, M.-C. (2013). In situ polymerization of PET in the presence of pristine and organo-modified clays. International Polymer Processing, 28(3), 331-340. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1). Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2013). Morphology Evolution and Thermomechanical Characteristics of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Rubber Chemistry and Technology, 86(4), 521-537. Lien externe
Hébert, J.-S., Wood-Adams, P., Heuzey, M.-C., Dubois, C., & Brisson, J. (2013). Morphology of polylactic acid crystallized during annealing after uniaxial deformation. Journal of Polymer Science, Part B: Polymer Physics, 51(6), 430-440. Lien externe
Mendez-Portillo, L. S., Heniche, M., Dubois, C., & Tanguy, P. A. (2013). Numerical investigation of the hydrodynamics of split-and-recombination and multilamination microreactors. AICHE Journal, 59(3), 988-1001. Lien externe
Méndez-Portillo, L. S., Fradette, L., Dubois, C., & Tanguy, P. A. (2012). Characterization of the hydrodynamics and mixing performance of a split-and-recombination (SAR) prototype microreactor and a multilamination commercial microreactor. Industrial and Engineering Chemistry Research, 51(2), 994-1005. Lien externe
Khoshniyat, A., Hashemi, A., Sharif, A., Aalaie, J., & Dubois, C. (2012). Effect of Surface Modification of Bentonite Nanoclay With Polymers on Its Stability in an Electrolyte Solution. Polymer Science Series B, 54(1-2), 61-72. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2012). The Effects of Nanoclay Dispersion Levels and Processing Parameters on the Dynamic Vulcanization of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Polymer Engineering and Science, 52(5), 1099-1110. Lien externe
Esmaeili, B., Chaouki, J., & Dubois, C. (2012). Nanoparticle Encapsulation by a Polymer Via in Situ Polymerization in Supercritical Conditions. Polymer Engineering and Science, 52(3), 637-642. Lien externe
Cossu, C., Heuzey, M.-C., Lussier, L.-S., & Dubois, C. (2011). Early development of a biodegradable energetic elastomer. Journal of Applied Polymer Science, 119(6), 3645-57. Lien externe
Rajabian, M., Naderi, G., Carreau, P., & Dubois, C. (2011). Erratum: Flow-induced particle orientation and rheological properties of suspensions of organoclays in thermoplastic resins. Journal of Polymer Science. Part B: Polymer Physics, 49(5), 398-398. Lien externe
Lebon, G., MacHrafi, H., Grmela, M., & Dubois, C. (2011). An extended thermodynamic model of transient heat conduction at sub-continuum scales. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 467(2135), 3241-3256. Lien externe
Lebon, G., Grmela, M., & Dubois, C. (2011). From ballistic to diffusive regimes in heat transport at nano-scales. Comptes Rendus Mécanique, 339(5), 324-328. Lien externe
Ung, B., Dupuis, A., Stoeffler, K., Dubois, C., & Skorobogatiy, M. A. (2011). High-refractive-index composite materials for terahertz waveguides: Trade-off between index contrast and absorption loss. Journal of the Optical Society of America B: Optical Physics, 28(4), 917-921. Lien externe
Grmela, M., Lebon, G., & Dubois, C. (2011). Multiscale thermodynamics and mechanics of heat. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics, 83(6), 061134-061134. Lien externe
Naderi, G., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P., & Dubois, C. (2011). Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide. Polymer Engineering and Science, 51(2), 278-284. Lien externe
Sathiyanathan, K., Lee, R., Chesser, H., Dubois, C., Stowe, R., Farinaccio, R., & Ringuette, S. (2011). Solid propellant microthruster design for nanosatellite applications. Journal of Propulsion and Power, 27(6), 1288-1294. Lien externe
Dupuis, A., Stoeffler, K., Ung, B., Dubois, C., & Skorobogatiy, M. A. (2011). Transmission measurements of hollow-core THz Bragg fibers. Journal of the Optical Society of America B: Optical Physics, 28(4), 896-907. Lien externe
Rajabian, M., Naderi, G., Carreau, P. J., & Dubois, C. (2010). Flow-induced particle orientation and rheological properties of suspensions of organoclays in thermoplastic resins. Journal of Polymer Science Part B, 48(18), 2003-2011. Lien externe
Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., & Skorobogatiy, M. A. (2010). All-polymeric photonic bandgap polystyrene/polymethyl methacrylate Bragg fibers. SPE Plastic research online, 3 pages. Lien externe
Lima, R. J. P., Dubois, C., Mader, O., Stowe, R., & Ringuette, S. (2010). Boron nanoparticle-rich fuels for gas generators and propellants. International Journal of Energetic Materials and Chemical Propulsion, 9(5), 437-446. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2010). The effect of compatibilizer on the co-continuity and nanoclay dispersion level of tpe nanocomposites based on PP/EPDM. Polymer Engineering and Science, 50(11), 2131-2142. Lien externe
Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., & Skorobogatiy, M. A. (2010). Fabrication of all-polymeric photonic bandgap Bragg fibers using rolling of coextruded PS/PMMA multilayer films. Polymer Engineering and Science, 50(6), 1122-1127. Lien externe
Mazinani, S., Ajji, A., & Dubois, C. (2010). Fundamental study of crystallization, orientation, and electrical conductivity of electrospun PET/carbon nanotube nanofibers. Journal of Polymer Science, Part B: Polymer Physics, 48(19), 2052-2064. Lien externe
Rajabian, M., Naderi, G., Dubois, C., & Lafleur, P. (2010). Measurements and Model Predictions of Transient Elongational Rheology of Polymeric Nanocomposites. Rheologica Acta, 49(1), 105-118. Lien externe
Eslami, H., Grmela, M., Dubois, C., & Lafleur, P. (2010). Melt rheology of biodegradable poly[(butylene succinate)-co-adipate]: Experimental and model predictions. Journal of polymer science. Part B, Polymer physics, 48(8), 832-839. Lien externe
Taghizadeh, E., Naderi, G., & Dubois, C. (2010). Rheological and Morphological Properties of Pa6/Eco Nanocomposites. Rheologica Acta, 49(10), 1015-1027. Lien externe
Keshtkar, M., Heuzey, M.-C., Carreau, P., Rajabian, M., & Dubois, C. (2010). Rheological properties and microstructural evolution of semi-flexible fiber suspensions under shear flow. Journal of Rheology, 54(2), 197-222. Lien externe
Mazinani, S., Ajji, A., & Dubois, C. (2010). Structure and properties of melt-spun PET/MWCNT nanocomposite fibers. Polymer Engineering and Science, 50(10), 1956-1968. Lien externe
Esmaeili, B., Chaouki, J., & Dubois, C. (2009). Encapsulation of nanoparticles by polymerization compounding in a gas/solid fluidized bed reactor. AICHE Journal, 55(9), 2271-2278. Lien externe
Dupuis, A., Allard, J.-F., Morris, D., Stoeffler, K., Dubois, C., & Skorobogatiy, M. A. (2009). Fabrication and THz loss measurements of porous subwavelength fibers using a directional coupler method. Optics Express, 17(10), 8012-8028. Lien externe
Mazinani, S., Ajji, A., & Dubois, C. (2009). Morphology, structure and properties of conductive PS/CNT nanocomposite electrospun mat. Polymer, 50(14), 3329-3342. Lien externe
Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Wingfield, R., Dubois, C., & Skorobogatiy, M. A. (2008). Color-Changing and Color-Tunable Photonic Bandgap Fiber Textiles. Optics Express, 16(20), 15677-15693. Lien externe
Gauvreau, B., Schicker, K., Guo, N., Dubois, C., Wingfield, R., & Skorobogatiy, M. A. (2008). Color-on-demand photonic textiles. Textile journal, 125, 70-81. Lien externe
Yuryev, Y., Wood-Adams, P., Heuzey, M.-C., Dubois, C., & Brisson, J. (2008). Crystallization of Polylactide Films: an Atomic Force Microscopy Study of the Effects of Temperature and Blending. Polymer, 49(9), 2306-2320. Lien externe
Rajabian, M., Dubois, C., Grmela, M., & Carreau, P. (2008). Effects of Polymer-Fiber Interactions on Rheology and Flow Behavior of Suspensions of Semi-Flexible Fibers in Polymeric Liquids. Rheologica Acta, 47(7), 701-717. Lien externe
Esmaeili, B., Chaouki, J., & Dubois, C. (2008). An Evaluation of the Solid Hold-up Distribution in a Fluidized Bed of Nanoparticles Using Radioactive Densitometry and Fibre Optics. Canadian Journal of Chemical Engineering, 86(3), 543-552. Lien externe
Rajabian, M., Naderi, G., Beheshty, M. H., Lafleur, P., Dubois, C., & Carreau, P. (2008). Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows. International Polymer Processing, 23(1), 110-118. Lien externe
Dupuis, A., Guo, N., Gao, Y., Skorobogata, O., Gauvreau, B., Dubois, C., & Skorobogatiy, M. A. (2008). Fabrication strategies and potential applications of the “green” microstructured optical fibers. Journal of Biomedical Optics, 13(5), 054003-054003. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2008). The Influence of Matrix Viscosity and Composition on the Morphology, Rheology, and Mechanical Properties of Thermoplastic Elastomer Nanocomposites Based on Epdm/Pp. Polymer Composites, 29(12), 1301-1309. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2007). Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on EPDM/PP (Rheology & Morphology). International Polymer Processing, 22(3), 284-292. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2007). Microstructure-Properties Correlations in Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on PP/EPDM. Polymer Engineering and Science, 47(3), 207-217. Lien externe
Dubois, C., Lafleur, P., Roy, C., Brousseau, P., & Stowe, R. A. (2007). Polymer-Grafted Metal Nanoparticles for Fuel Applications. Journal of Propulsion and Power, 23(4), 651-658. Lien externe
Dupuis, A., Guo, N., Gao, Y., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (2007). Prospective for Biodegradable Microstructured Optical Fibers. Optics Letters, 32(2), 109-111. Lien externe
Gao, Y., Guo, N., Gauvreau, B., Rajabian, M., Skorobogata, O., Pone, E., Zabeida, O., Martinu, L., Dubois, C., & Skorobogatiy, M. A. (2006). Consecutive Solvent Evaporation and Co-Rolling Techniques for Polymer Multilayer Hollow Fiber Preform Fabrication. Journal of Materials Research, 21(9), 2246-2254. Lien externe
Ringuette, S., Stowe, R., Dubois, C., Charlet, G., Kwok, Q., & Jones, D. E. G. (2006). Deuterium Effect on Thermal Decomposition of Deuterated Gap: 1. Slow Thermal Analysis With a Tga-Dta-Ftir-Ms. Journal of Energetic Materials, 24(4), 307-320. Lien externe
Pone, E., Dubois, C., Guo, N., Gao, Y., Dupuis, A., Boismenu, F., Lacroix, S., & Skorobogatiy, M. A. (2006). Drawing of the Hollow All-Polymer Bragg Fibers. Optics Express, 14(13), 5838-5852. Lien externe
Pone, E., Dubois, C., Guo, N., Lacroix, S., & Skorobogatiy, M. A. (2006). Newtonian and non-Newtonian models of the hollow all-polymer Bragg fiber drawing. Journal of Lightwave Technology, 24(12), 4991-4999. Lien externe
Rajabian, M., & Dubois, C. (2006). Polymerization Compounding of Hdpe/Kevlar Composites. I. Morphology and Mechanical Properties. Polymer Composites, 27(2), 129-137. Lien externe
Dubois, C., Rajabian, M., & Rodrigue, D. (2006). Polymerization compounding of polyurethane-fumed silica composites. Polymer Engineering and Science, 46(3), 360-371. Lien externe
Esmaeili, B., Chaouki, J., & Dubois, C. (2006). Polymerization compounding on the surface of zirconia nanoparticles. Macromolecular Symposia, 243(1), 268-276. Lien externe
Mary, B., Dubois, C., Carreau, P., & Brousseau, P. (2006). Rheological properties of suspensions of polyethylene-coated aluminum nanoparticles. Rheologica Acta, 45(5), 561-573. Lien externe
Ringuette, S., Dubois, C., Stowe, R. A., & Charlet, G. (2006). Synthesis and characterization of deuterated glycidyl azide polymer (GAP). Propellants, Explosives, Pyrotechnics, 31(2), 131-138. Lien externe
Brousseau, P., & Dubois, C. (2005). Polymer-Coated Ultra-Fine Particles. MRS Proceedings, 896. Lien externe
Rajabian, M., Dubois, C., & Grmela, M. (2005). Suspensions of Semiflexible Fibers in Polymeric Fluids: Rheology and Thermodynamics. Rheologica Acta, 44(5), 521-535. Lien externe
Yves Robidoux, P., Dubois, C., Hawari, J., & Sunahara, G. I. (2004). Assessment of Soil Toxicity from an Antitank Firing Range Using Lumbricus terrestris and Eisenia andrei in Mesocosms and Laboratory Studies. Ecotoxicology, 13(6), 603-614. Lien externe
Robidoux, P. Y., Gong, P., Sarrazin, M., Bardai, G., Paquet, L., Hawari, J., Dubois, C., & Sunahara, G. I. (2004). Toxicity assessment of contaminated soils from an antitank firing range. Ecotoxicology and Environmental Safety, 58(3), 300-313. Lien externe
Pudge, I. B., Daugulis, A. J., & Dubois, C. (2003). Use of Enterobacter cloacae ATCC 43560 in the development of a two-phase partitioning bioreactor for the destruction of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Journal of Biotechnology, 100(1), 65-75. Lien externe
Groom, C. A., Halasz, A., Paquet, L., Morris, N., Olivier, L., Dubois, C., & Hawari, J. (2002). Accumulation of HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) in indigenous and agricultural plants grown in HMX-contaminated anti-tank firing-range soil. Environmental Science and Technology, 36(1), 112-118. Lien externe
Halasz, A., Groom, C., Zhou, E., Paquet, L., Beaulieu, C., Deschamps, S., Corriveau, A., Thiboutot, S., Ampleman, G., Dubois, C., & Hawari, J. (2002). Detection of explosives and their degradation products in soil environments. Journal of Chromatography A, 963(1-2), 411-418. Lien externe
Dubois, C., & Perreault, F. (2002). Shelf life prediction of propellants using a reaction severity index. Propellants, Explosives, Pyrotechnics, 27(5), 253-261. Lien externe
Ringuette, S., Dubois, C., & Stowe, R. (2001). Optimization of GAP-based ducted rocket fuels from gas generator exhaust characterization. Propellants, Explosives, Pyrotechnics, 26(3), 118-124. Lien externe
Zhou, G., Tanguy, P. A., & Dubois, C. (2000). Power Consumption in a Double Planetary Mixer With Non- Newtonian and Viscoelastic Materials. Chemical Engineering Research & Design, 78(3), 445-453. Lien externe
Dubois, C., Ait-Kadi, A., & Tanguy, P. A. (1998). Chemorheology of Polyurethane Systems as Predicted From Monte Carlo Simulations of Their Evolutive Molecular Weight Distribution. Journal of Rheology, 42(3), 435-452. Lien externe
Dubois, C., Tanguy, P. A., & Ait-Kadi, A. (1998). Modelling of Polyurethane Composites Mixing Cycles. Chemical Engineering Research & Design, 76(1), 9-15. Lien externe
Dubois, C., Desilets, S., Aitkadi, A., & Tanguy, P. A. (1995). Bulk-polymerization of hydroxyl terminated polybutadiene (htpb) with tolylene diisocyanate (tdi) - a kinetics study using c-13-nmr spectroscopy. Journal of Applied Polymer Science, 58(4), 827-834. Lien externe
Lush, D., Lifshitz, R., Hart, V., Morris, N., Beaudet, S., Groom, C., Halasz, A., Hawari, J., Paquet, L., Dubois, C., Olivier, L., Shooner, F., Glick, B., Falletta, P., Lee, S., Skog, S., & Seto, P. (2000). Evaluation of Phytoremediation for HMX at the Wainwright Military Base: Greenhouse Trials. (Rapport technique). Lien externe
Benchimol, A. A., Dubois, C., Bertrand, F., & Vidal, D. (octobre 2018). Implementation of a viscoelastic model to generate a shear stress test using the DEVSS\SUPG method [Communication écrite]. 2018 COSMOL Conference, Boston, MA, USA. Lien externe
Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (juin 2014). Effect of cellulose nanocrystals (CNCs) on crystallinity, mechanical and rheological properties of polypropylene/CNCs nanocomposites [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (5 pages). Lien externe
Legros, R., Farand, P., Perrier, M., Bertrand, F., Dubois, C., & Klvana, D. (octobre 2015). Horizontal Integration of Core Courses in Chemical Engineering : 10 years after [Communication écrite]. 65th CSChE Annual Meeting, Calgary, Alberta. Non disponible
Sanhye, W., Dubois, C., Laroche, I., & Pelletier, P. (octobre 2015). Simulation of the Cooling and Phase Change of a Melt-Cast Explosive [Communication écrite]. COMSOL 2015, Boston, Mass.. Lien externe
Labonte, M., & Dubois, C. (mai 2011). Optimization of molding conditions of a plug-assisted thermoformed thin containers in a high speed and volume production context [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Non disponible
Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Dubois, C., & Skorobogatiy, M. A. (juin 2009). Colorful photonic band gap fiber-based textiles [Communication écrite]. Conference on Lasers and Electro-Optics and 2009 Conference on Quantum Electronics and Laser Science Conference, Baltimore, MD, United states. Lien externe
Saeidlou, S., Bringout, G., Dubois, C., & Martel, S. (octobre 2009). Polymeric fibers for bacterial carriers and electrical signals in future nano-networks [Communication écrite]. 4th International ICST Conference on Nano-Networks, Luzern, Switzerland. Non disponible
Mazinani, S., Ajji, A., & Dubois, C. (juin 2009). Structure and properties of melt-spun PET/MWCNT nanocomposite fibers [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Lien externe
Ebrahimpour, O., Esmaeili, B., Chaouki, J., & Dubois, C. (août 2009). Synthesis and characterization of polyethylene-grafted SiC particles by polymerization compounding [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Harbec, A., Maes, F., Heuzey, M.-C., Lussier, L.-S., & Dubois, C. (mars 2008). Alternative techniques to characterize polyester based biopolymers [Communication écrite]. Global Plastics Environmental Conference, GPEC 2008, Orlando, FL, United states. Non disponible
Dubois, C., Skorobogatiy, M. A., Ajji, A., & Stoeffler, K. (octobre 2008). Fabrication of 1D photonic crystals based on hollow/solid-core all-polymer optic fibers [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible
Mazinani, S., Dubois, C., & Ajji, A. (octobre 2008). Morphological and physical characterization of PET/MWCNT Melt-Spun fibers [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Non disponible
Mazinani, S., Dubois, C., & Ajji, A. (octobre 2008). Production and characterization of electrospun PET/MWCNT nanocomposite nanofiber [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible
Mazinani, S., Dubois, C., & Ajji, A. (octobre 2008). Production and characterization of electrospun PET/MWCNT nanocomposite nanofiber mat [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Non disponible
Dupuis, A., Guo, N., Gao, Y., Gauvreau, B., Dubois, C., & Skorobogatiy, M. A. (mai 2008). Prospects for "green" microstructured optical fibers [Communication écrite]. Conference on Lasers and Electro-Optics and Conference on Quantum Electronics and Laser Science (CLEO-QELS 2008), San Jose, CA, United States. Lien externe
Mazinani, S., Ajji, A., & Dubois, C. (août 2008). Rheological/Morphological study of PS/CNT nanocomposite electrospun fibers [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe
Dupuis, A., Gao, Y., Guo, N., Pone, E., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (septembre 2006). Biodegradable, double-core, porous optical fiber [Communication écrite]. 15th International Conference on Plastic Optical Fibers, Seoul, Korea. Non disponible
Dupuis, A., Gao, Y., Guo, N., Pone, E., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (mai 2006). Biodegradable, double-core, porous optical fiber [Communication écrite]. CLEO 2006, Long Beach, CA, USA. Lien externe
Dupuis, A., Gao, Y., Guo, N., Pone, E., Godbout, N., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (octobre 2006). Biodegradable, double-core, porous optical fiber for sensing applications [Communication écrite]. 18th International Conference on Optical Fiber Sensors, Cancun, Mexico. Lien externe
Gao, Y., Guo, N., Gauvreau, B., Rajabian, M., Skorobogata, O., Pone, E., Zabeida, O., Martinu, L., Dubois, C., & Skorobogatiy, M. A. (septembre 2006). Consecutive solvent evaporation and co-rolling techniques for polymer multilayer hollow fiber preform fabrication [Communication écrite]. 15th International Conference on Plastic Optical Fibers, Seoul, Korea. Non disponible
Pone, E., Dubois, C., Guo, N., Gao, Y., Dupuis, A., Lacroix, S., & Skorobogatiy, M. A. (avril 2006). Drawing of hollow multilayered all-polymer fibers [Communication écrite]. Smart Nanotextiles. Symposium, San Francisco, CA, USA. Lien externe
Pone, E., Dubois, C., Guo, N., Gao, A., Dupuis, A., Lacroix, S., & Skorobogatiy, M. A. (septembre 2006). Fabrication of the hollow all-polymer Bragg fibers [Communication écrite]. 32nd European Conference on Optical Communication, Cannes, France. Lien externe
Guo, N., Gao, Y., Dupuis, A., Pone, E., Lacroix, S., Dubois, C., & Skorobogatiy, M. A. (septembre 2006). Fabrication of the hollow all-polymer Bragg fibers [Communication écrite]. 15th International Conference on Plastic Optical Fibers, Seoul, Korea. Non disponible
Perrier, M., Bertrand, F., Dubois, C., Klvana, D., Legros, R., & Farand, P. (juin 2005). A case study in curriculum integration of core courses in chemical engineering [Communication écrite]. 2005 ELD/ASEE Annual Conference, Portland, Oregon, USA. Non disponible
Perrier, M., Bertrand, F., Dubois, C., Klvana, D., Legros, R., & Farand, P. (juin 2005). Integrating process control unit operations in a single core course of the chemical engineering curriculum [Communication écrite]. 2nd Canadian Design Engineering Network Conference, Kananaskis, AB, Canada. Non disponible
Roy, C., Dubois, C., Lafleur, P., & Brousseau, P. (décembre 2003). The dispersion and polymer coating of ultrafine aluminium powders by the Ziegler-Natta reaction [Communication écrite]. Synthesis, Characterization and Properties of Energetic/ Reactive Nanomaterials Symposium, Boston, MA, USA. Lien externe
Thiboutot, S., Ampleman, G., Dubé, P., Dubois, C., Martel, R., Lefebvre, R., Mailloux, M., Sunahara, G., Robidoux, P. Y., & Hawari, J. (septembre 2000). Characterization of DND training ranges including anti-tank firing ranges and ecotoxicological assessment [Communication écrite]. 5th International Symposium and Exhibition on Environmental Contamination in Central and Eastern Europe, Prague, Czech Republic. Non disponible
Aif-Kadi, A., Grmela, M., & Dubois, C. (janvier 2000). Constrained multimode rheological model for polymeric materials: application to miscible polymer blends and branched polymers [Communication écrite]. XIIIth congress on rheology, Cambridge, UK. Non disponible
Robidoux, P. Y., Hawari, J., Gong, P., Thiboutot, S., Dubois, C., & Sunahara, G. I. (octobre 2000). Ecotoxicological risk assessment of a explosives-contaminated site [Communication écrite]. 27th Annual Aquatic Toxicity Workshop, St. John's, Newfoundland. Lien externe
Dubois, C., Thibault, F., Tanguy, P. A., & Ait-Kadi, A. Characterization of viscous mixing in a twin intermeshing conical helical mixer [Communication écrite]. Fluid mixing 5 conference. Non disponible
Chaouki, J., Ebrahimpour, O., & Dubois, C. (2018). Porous SiC ceramic and method for the fabrication thereof. (Brevet no US9919975). Lien externe
Ampleman, G., Brousseau, P., Thiboutot, S., Dubois, C., & Diaz, E. (2003). Insensitive melt cast explosive compositions containing energetic thermoplastic elastomers. (Brevet no US6562159). Lien externe
Esmizadeh, E., Khalili, S., Vahidifar, A., Naderi, G., & Dubois, C. (2019). Waste Polymethyl Methacrylate (PMMA): Recycling and high-yield monomer recovery. Dans Handbook of Ecomaterials (p. 2977-3009). Lien externe
