<  Back to the Polytechnique Montréal portal

Items where Division is "Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Document subtype | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Z
Number of items: 201.

A

Aboussaleh, M., & Boukhili, R. (1996, January). Life prediction for composite laminates subjected to service loading spectra [Paper]. Composites 1996 and Oriented Polymers Symposium, Boucherville, Québec. Unavailable

Allam, M. (1996). Analysis of hydraulically expanded tube-to-tubesheet joints [Ph.D. thesis, École Polytechnique de Montréal]. Available

Allam, M., Chaaban, A., & Bazergui, A. (1996, July). Estimation of residual stresses in hydraulically expanded tube-to-tubesheet joints [Paper]. American Society of Mechanical Engineers (ASME) pressure vessels and piping conference, Montréal, Québec. Unavailable

Allard, P., Dansereau, J., Trudeau, F., & Herrera, R. (1996). Prosthetic foot with enhanced heel control. (Patent no. US5509937). External link

Ammara, I., Masson, C., & Paraschivoiu, I. (1996). Effects of distributed surface roughness on the linear stability of laminar boundary layers. Canadian aeronautics and space journal, 42(4), 207-212. Unavailable

Andre, B., Trochu, F., & Dansereau, J. (1996). Approach for the smoothing of three-dimensional reconstructions of the human spine using dual Kriging interpolation. Medical & Biological Engineering & Computing, 34(3), 185-191. External link

Anh Dung, N., Malinowski, P., Kajl, S., & Balazinski, M. (1996, January). Fuzzy logic approach to manual material handling tasks [Paper]. 5th International Conference on Human Aspects of Advanced Manufacturing, Maui, Hawaii, USA. Unavailable

Argoubi, M., & Shirazi-Adl, A. (1996). Poroelastic creep response analysis of a lumbar motion segment in compression. Journal of Biomechanics, 29(10), 1331-1339. External link

Atarsia, A., Boukhili, R., & Blaise, E. (1996, January). Relationships between DSC and DMA of undercured composites [Paper]. 3rd International Conference on Composites Engineering, New Orleans, Louisiana. Unavailable

Aubé, F. (1996). Effets du flux de chaleur sur les pertes de pression par frottement dans des écoulements monophasiques et diphasiques [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Aubin, C.-É., Dansereau, J., De Guise, J. A., & Labelle, H. (1997, January). Biomechanical simulations of a new orthotic approach for the treatment of scoliotic deformities based on truncal coupling mechanisms [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Stockholm, Sweden. External link

Aubin, C.-É., Dansereau, J., De Guise, J. A., & Labelle, H. (1997, January). Clinical analysis of coupling mechanisms between the scoliotic spine and rib cage involved in orthotic treatments [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Aubin, C.-É., Dansereau, J., De Guise, J. A., & Labelle, H. (1996). Étude du couplage biomécanique entre la colonne vertébrale et la cage thoracique dans le traitement de la scoliose par orthèse. Annales de chirurgie, 50(8), 641-650. Unavailable

Aubin, C.-É., Dansereau, J., Petit, Y., Parent, F., De Guise, J. A., & Labelle, H. (1996, June). Three-dimensional reconstruction of vertebral endplates for the study of scoliotic spine wedging [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Aubin, C.-É., Legault, M. C., Skalli, W., Descrimes, J. L., Labelle, H., Lavaste, F., & Dansereau, J. (1997, January). Biomechanical study of the geometrical and mechanical parameters of the anterior and posterior spines [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Audet, M. (1996). Simulation numérique tridimensionnelle du transfert de chaleur dans les moules d'injection pour matériaux composites [Master's thesis, École Polytechnique de Montréal]. Unavailable

Aurier, T. (1996). Modélisation et simulation numérique des écoulements turbulents à volume variable : application à la combustion. (Technical Report n° EPM-RT-96-17). Restricted access

Avérous, L., & Gauvin, R. (1996). Etude de l'état de surface de pièces produites selon un procédé RTM-phénolique. (Technical Report n° EPM-RT-96-20). Restricted access

B

Bacon, I. (1996). Etude du cumul de dommage en fatigue dans l'acier AISI 1012 et de son effet sur les propriétés mécaniques statiques [Master's thesis, École Polytechnique de Montréal]. Available

Balazinski, M., & Plaza, M. (1996, January). Impact of feed variation on chip instability and tool waer [Paper]. CSME Forum, Hamilton. Unavailable

Balazinski, M., Boyer, H., & Czogala, E. (1996, January). Application of fuzzy intelligent control to an automatic parachute guiding system [Paper]. 4th International Fuzzy Systems and Intelligent Control Conference, Maui, Hawaii. Unavailable

Balazinski, M., Czogala, E., Drwal, A., & Mrozek, A. (1996). Processing of uncertain knowledge in fuzzy decision support system fuzzy-flou. Archives of theoretical and applied computer science, Polish academy of sciences, 8(1-2), 63-74. Unavailable

Balazinski, M., Czogala, E., Drwal, G., & Mrozek, M. (1996, September). Fuzzy decision support system "FUZZY-FLOU" operating uncertain knowledge [Paper]. 5th IEEE International Fuzzy Systems, New Orleans, Louisiana. External link

Balazinski, M., Klim, Z., & Vinet, R. (1996, January). Utilisation de la logique floue pour noter les exposés oraux [Paper]. Congrès canadien de l'éducation en ingénierie, Kingston, Canada. Unavailable

Bédard, S., Teyssedou, A., Tye, P., & Midvidy, W. I. (1996, September). Effect of the position of an orifice with respect to an elbow in CCF [Paper]. 5th International Conference on Simulation Methods in Nuclear Science and Engineering, Montréal, QC. Unavailable

Ben Yedder, R. (1996). Étude paramétrique de la convection laminaire et turbulente dans des espaces clos avec parois solides [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Bendjaballah, M. Z. (1996). Modélisation et analyse par éléments finis d'un genou humain [Ph.D. thesis, École Polytechnique de Montréal]. Available

Bendjaballah, M. Z., & Shirazi-Adl, A. (1996, January). Multi-body contact analysis of the tibiofemoral joint in varus-valgus [Paper]. Advances in bioengineering ASME WAM, Atlanta. Unavailable

Bendjaballah, M. Z., Shirazi-Adl, A., & Zukor, D. J. (1996, January). Finite element model study of human knee joint [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Benhaj Jilani, A. (1996). Nonlinear finite element analysis of the human tibiofemoral joint in axial rotation [Master's thesis, École Polytechnique de Montréal]. Unavailable

Benjelloun, K. (1996). Étude de la stabilité des systèmes linéaires à sauts markoviens [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Benjelloun, K., Boukas, E.-K., & Yang, H. (1996). Robust stabilizability of uncertain linear time-delay systems with Markovian jumping parameters. Journal of dynamic systems, measurement, and control, 118(4), 776-783. External link

Benoit, Y. (1996). Modélisation interactive de paramètres rhéologiques et géométriques pour des procédés d'injection sur renfort [Master's thesis, École Polytechnique de Montréal]. Available

Bian, W., Vasseur, P., & Bilgen, E. (1996). Effect of an external magnetic field on buoyancy-driven flow in a shallow porous cavity. Numerical Heat Transfer. Part A, Applications, 29(6), 625-638. External link

Bian, W., Vasseur, P., Bilgen, E., & Meng, F. (1996). Effect of an electromagnetic field on natural convection in an inclined porous layer. International Journal of Heat and Fluid Flow, 17(1), 36-44. External link

Bobee, B., Mathier, L., Perron, H., Trudel, P., Rasmussen, P. F., Cavadias, G., Bernier, J., Nguyen, V. T. V., Pandey, G., Ashkar, F., Ouarda, T. B. M. J., Adamowski, K., Alila, Y., Daviau, J. L., Gingras, D., Liang, G. C., Rousselle, J., Birikundavyi, S., Ribeirocorrea, J., ... Pilon, P. J. (1996). Inter-comparison of regional flood frequency procedures for canadian rivers. Journal of Hydrology, 186(1-4), 85-103. External link

Bobee, B., Mathier, L., Perron, H., Trudel, P., Rasmussen, P. F., Cavadias, G., Bernier, J., Nguyen, V. T. V., Pandey, G., Ashkar, F., Ouarda, T. B. M. J., Adamowski, K., Alila, Y., Daviau, J. L., Gingras, D., Liang, G. C., Rousselle, J., Birikundavyi, S., Ribeirocorrea, J., ... Pilon, P. J. (1996). Presentation and review of some methods for regional flood frequency-analysis. Journal of Hydrology, 186(1-4), 63-84. External link

Boivin, S., Masson, C., & Paraschivoiu, I. Nonparallel effects in 3-D compressible transition analysis [Paper]. 4th Annual Conference of the CFD Society of Canada. Unavailable

Borggaard, J., & Pelletier, D. (1996, June). Computing design sensitivities using an adaptive finite element method [Paper]. 27th AIAA Fluid Dynamics Conference, New Orleans, Louisiana. External link

Borggaard, J., & Pelletier, D. (1996, May). On optimal design using an adaptive finite element method [Paper]. 1st International Conference on Nonlinear Problems in Aviation and Aerospace, Daytona Beach, Fl, USA. Unavailable

Borggaard, J., & Pelletier, D. (1996, June). Stability of continuous-time linear systems with Markovian jumping parameters and constrained control [Paper]. 27th Fluid Dynamics Conference, New Orleans, Louisiana (8 pages). Unavailable

Boukas, E.-K., & Yang, H. (1996). Optimal control of manufacturing flow and preventive maintenance. IEEE Transactions on Automatic Control, 41(6), 881-885. External link

Boukas, E.-K., & Yang, H. (1996). Stability of stochastic systems with jumps. Mathematical Problems in Engineering, 3(2), 173-185. Available

Boukas, E.-K., Yang, J., Zhang, Q., & Yin, G. (1996). Periodic maintenance and repair rate control in stochastic manufacturing systems. Journal of Optimization Theory and Applications, 91(2), 347-361. External link

Boukas, E.-K., Zhang, Q., & Yin, G. On robust design for a class of failure prone manufacturing systems [Paper]. Recent advances in control and optimization of manufacturing systems. External link

Bouzid, A., & Chaaban, A. (1996, July). Proposed method for evaluating relaxation in bolted flanged connections [Paper]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Unavailable

Brahimi, M. T., Tran, P., Tezok, F., & Paraschivoiu, I. (1996, September). Numerical simulation of in-flight aircraft icing [Paper]. 20th Congress of the International Council of the Aeronautical Sciences (ICAS 1996), Naples, Italy. External link

Brailovski, V., & Trochu, F. (1996). Review of shape-memory alloys medical applications in russia. Bio-Medical Materials and Engineering, 6(4), 291-298. External link

Brailovski, V., Trochu, F., & Daigneault, G. (1996). Temporal characteristics of shape memory linear actuators and their application to circuit breakers. Materials and Design, 17(3), 151-158. External link

Bramley, R., & Pelletier, D. (1996, January). Iterative methods and formulations for incompressible FEM flow solvers [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link

Brouillette, E., Martinuzzi, R., & Prud'homme, M. (1996, January). Experimental study of turbulent diffusion models [Paper]. CSME forum 1996, thermal and fluids engineering, Hamilton. Unavailable

C

Chalut, S. (1996). Détermination automatique des contraintes géométriques du produit en vue de la génération des gammes d'assemblage [Master's thesis, École Polytechnique de Montréal]. Unavailable

Chocron, D., Brahimi, M. T., & Paraschivoiu, I. (1996, May). Numerical simulation of ice accretion on wind turbine blades [Paper]. European Wind Energy Conference and Exhibition, Goeteborg (Sweden). Unavailable

Côté, F. (1996). Algorithmes d'accélération de convergence pour la solution des écoulements compressibles sur maillages non structurés [Master's thesis, École Polytechnique de Montréal]. Unavailable

D

Dammak, M., Hashemi, A., Shirazi-Adl, A., & Zukor, D. J. (1996, January). Experimental and finite element fixation studies of posts and screws [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Dammak, M., Shirazi-Adl, A., Schwartz, M. J., & Gustavson, L. (1996, January). Experimental determination of friction properties at bone-porous coated metal interfaces [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Dammak, M., Shirazi-Adl, A., Schwartz, M. J., & Gustavson, L. (1996, January). Measurement of friction properties at the bone-metal interface for various porous metal surfaces [Paper]. Advances in bioengineering ASME WAM, Atlanta. Unavailable

Dansereau, J., Labelle, H., De Guise, J. A., & Bellefleur, C. (1997, January). 3-D study of scoliotic compensation by comparison of spinal deformities to rib cage deformities [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Degan, G., & Vasseur, P. (1996). Natural convection in a vertical slot filled with an anisotropic porous medium with oblique principal axes. Numerical Heat Transfer. Part A, Applications, 30(4), 397-412. External link

Delorme, S. (1996). Etude de la modélisation par krigeage géométrique tridimensionnel des vertèbres saines et scoliotiques [Master's thesis, École Polytechnique de Montréal]. Available

Delorme, S., Dansereau, J., Aubin, C.-É., De Guise, J., & Labelle, H. (1997, January). Geometrical modelling of vertebrae: Influence of 3-D kriging profile and control points on posterior elements extrapolation [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Derenne, M., Marchand, L., & Payne, J. R. (1996, July). Characterization behaviour of flexible graphite sheet gasket materials [Paper]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Unavailable

Derenne, M., Marchand, L., & Payne, J. R. (1996, January). Characterization of the hot relaxation and gross leakage resistance behaviour of PTFE based gasket material [Paper]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Unavailable

Derenne, M., Payne, J. R., & Marchand, L. (1996, January). Development of test procedures for fire resistance qualification of gaskets [Paper]. Technical symposium of the fluid sealing association, Houston, Texas. Unavailable

Devos Plancq, J.-M., Villeneuve, L., & Mascle, C. (1996, January). Object-oriented approach of simulation for minimized cost and complexity [Paper]. 1st Europe-Asia Congress of Mechatronics, Besançon, France. Unavailable

Dimitrov, I. (1996). Programmation hors-ligne de l'ébavurage robotisé [Master's thesis, École Polytechnique de Montréal]. Unavailable

Dupinet, É., Balazinski, M., & Czogala, E. (1996). Tolerance allocation based on fuzzy and simulated annealing. Journal of Intelligent Manufacturing, 7(6), 1-11. External link

E

Echaabi, J., & Trochu, F. (1996). Methodology to derive the implicit equation of failure criteria for fibrous composite laminates. Journal of Composite Materials, 30(10), 1088-1114. External link

Echaabi, J., Trochu, F., Pham, X. T., & Ouellet, M. (1996). Theoretical and experimental investigation of failure and damage progression of graphite-epoxy composites in flexural bending test. Journal of Reinforced Plastics and Composites, 15(7), 740-755. External link

Elomari, S., Boukhili, R., & Lloyd, D. J. (1996). Thermal expansion studies of prestrained Al₂O₃/Al metal matrix composite. ACTA Materialia, 44(5), 1873-1882. External link

Ennajimi, E. (1996). Étude de l'influence de la rigidité du système élastique machine-pièce-outil sur la précision d'usinage [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Ennajimi, E., Fortin, C., Balazinski, M., & Kraftchenko, I. (1996, January). Modélisation de l'erreur d'usinage due aux déplacements élastiques du système machine-pièce-outil [Paper]. Conférence internationale sur les mathématiques appliquées et les sciences de l'ingénieur (CIMASI 1996), Casablanca, Maroc. Unavailable

F

Fellahi, S., Favis, B. D., & Fisa, B. (1996). Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends. Polymer, 37(13), 2615-2626. External link

Ferland, P., Guittard, D., & Trochu, F. (1996). Concurrent methods for permeability measurement in resin transfer molding. Polymer Composites, 17(1), 149-158. External link

Fournier, C. (1996). Résolution de l'équation de transport neutronique par une méthode d'éléments finis basée sur une fonctionnelle mixte-duale [Master's thesis, École Polytechnique de Montréal]. Available

G

Gauvin, C. (1996). Reconstruction et modélisation tridimensionnelles personnalisées du bassin humain [Master's thesis, École Polytechnique de Montréal]. Unavailable

Gauvin, C., Dansereau, J., de Guise, J. A., Aubin, C.-É., & Labelle, H. (1997, June). 3-D personalized geometrical reconstruction and modelling of the pelvis for scoliotic deformity studies [Paper]. 1st Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Stockholm, Sweden. External link

Gauvin, R., & Trochu, F. (1996, June). Key issues in numerical simulation of liquid composites molding processes [Paper]. 29th ISATA Conference, Florence, Italy. Unavailable

Gauvin, R., Lebrun, G., & Trochu, F. (1996, October). Étude de la température de la résine durant le remplissage d'un moule chauffé pour les procèdés d'injection sur renforts [Paper]. 10es Journées nationales sur les composites, Paris, FRA. Unavailable

Gauvin, R., Trochu, F., Lemenn, Y., & Diallo, L. (1996). Permeability measurement and flow simulation through fiber reinforcement. Polymer Composites, 17(1), 34-42. External link

Godillon-Maquinghen, A. P., Dansereau, J., Labelle, H., & De Guise, J. (1997, January). Scoliotic spine. is it always a 3D deformity? [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Gou, M., & Bellavigna-Ladoux, O. (1996). Essais de filtres à air utilisés sur les moteurs d'autobus urbains des sociétés de transport du Québec. (Technical Report n° 907). Unavailable

Guemouria, N. (1996). Ecoulement et transfert de chaleur dans un milieu poreux anisotrope à frontière mobile [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

H

Hallé, S., Bernier, M., & Pinel, P. (1996, May). Gas content determination in insulated glazing units based on thermal measurements [Paper]. CSME forum 1996: thermal and fluids engineering, Hamilton (Canada). Unavailable

Hammami, A. (1996). Étude expérimentale et modélisation des perturbations de l'écoulement pour le procédé de moulage par transfert de résine [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Hammami, A., Trochu, F., Gauvin, R., & Bakalemian, P. Y. Predictive models for the edge effect in liquid composite molding [Paper]. 1st International Conference on Composite Science and Technology (ICCST 1996), Durban, South Africa. Unavailable

Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (1996). Directional permeability measurement of deformed reinforcement. Journal of Reinforced Plastics and Composites, 15(6), 552-562. External link

Harras, B., Cole, K. C., & Vu-Khanh, T. (1996). Optimization of the ultrasonic welding of PEEK-carbon composites. Journal of Reinforced Plastics and Composites, 15(2), 174-182. External link

Hashemi, A., Shirazi-Adl, A., & Dammak, M. (1996, May). Bi-directional friction properties at bone-implant interface [Paper]. 1996 5th World Biomaterials Congress, Toronto, Can. Unavailable

Hashemi, A., Shirazi-Adl, A., & Dammak, M. (1996, January). On the linear bi-directional friction properties of the bone-implant interface [Paper]. Advances in bioengineering ASME WAM, Atlanta. Unavailable

Hébert, A. (1996, September). Development of a subgroup method for the self-shielding of resonant isotopes in arbitrary geometries [Paper]. International Conference on the Physics of Reactors (PHYSOR 1996), Mito, Japan. Unavailable

Hess, A. (1996). Modélisation numérique tridimensionnelle des écoulements à surface libre appliquée à des environnements de bathymétrie quelconque [Master's thesis, École Polytechnique de Montréal]. Available

Hsu, K. H., Payne, J. R., & Derenne, M. (1996, July). Recent developments in PVRC gasket testing [Paper]. American Society of Mechanical Engineers (ASME) pressure vessels and piping conference, Montréal, Québec. Unavailable

I

Ignat, L., Pelletier, D., & Ilinca, F. (1996, January). An adaptive finite element method for turbulent heat transfer [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link

Ilinca, A., Labbé, P., & Camarero, R. (1996, June). Simulation of three-dimensional flows using moving and adaptive grids [Paper]. 4th Annual Conference of the Computational Fluid Dynamics Society of Canada. Unavailable

Ilinca, C. (1996). Développement d'estimateurs d'erreur pour la méthode de volumes finis appliquée aux équations d'Euler [Master's thesis, École Polytechnique de Montréal]. Available

Ilinca, F. (1996). Méthodes d'éléments finis adaptatives pour les écoulements turbulents [Ph.D. thesis, École Polytechnique de Montréal]. Available

Ilinca, F., & Pelletier, D. (1996, January). A pressure based adaptive finite element algorithm for compressible viscous flows [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Ilinca, F., Pelletier, D., & Garon, A. (1996, June). An approach for positivity preserving formulations for two equations turbulence model [Paper]. 4th Annual Conference of the Computational Fluid Dynamics Society of Canada, Ottawa, Ont. Unavailable

Ilinca, F., Pelletier, D., & Garon, A. (1996, June). Positivity preserving formulations for adaptive solution of two-equation models of turbulence [Paper]. 27th AIAA Fluid Dynamics Conference, New Orleans, Louisiana (22 pages). External link

J

Jabbour, T., Mascle, C., & Maranzana, R. (1996, January). Modélisation d'un mécanisme par entités d'assemblage [Paper]. CSME Forum, Toronto. Unavailable

Jabbour, T., Mascle, C., & Maranzana, R. (1996). Représentation des caractéristiques d'assemblage d'un produit mécanique. Revue internationale de CFAO et d'informatique graphique, 11(5), 545-566. Unavailable

K

Kaczor, S. (1996). Remaillage adaptatif pour les écoulements visqueux incompressibles en trois dimensions [Master's thesis, École Polytechnique de Montréal]. Available

Kallel, F., & Bertrand, M. (1996). Tissue elasticity reconstruction using linear perturbation method. IEEE Transactions on Medical Imaging, 15(3), 299-313. External link

Kallel, F., Bertrand, M., & Ophir, J. (1996). Fundamental limitations on the contrast-transfer efficiency in elastography : An analytic study. Ultrasound in Medicine and Biology, 22(4), 463-470. External link

Kennedy, G. G., St-Pierre, J., Guo, J., Gitzhofer, F., & Boulos, M. (1995, April). Boron determination in SiC using two INAA techniques [Paper]. 3rd International Workshop on Short-Time Activation Analysis, High-Rate Gamma Spectroscopy, and X-Ray Techniques, Vienna, Austria. Published in Journal of trace and microprobe techniques, 14(1). Unavailable

Kheira, A. (1996). Convection naturelle dans un espace annulaire effets de rotation et d'anisotropie [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Kiefer, A., Shirazi-Adl, A., & Parnianpour, M. (1996, January). Creep stability of human spine in neutral postures [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Kiefer, A., Shirazi-Adl, A., & Parnianpour, M. (1996, January). Stability of human spine in prolonged neutral postures [Paper]. Advances in bioengineering ASME WAM, Atlanta. Unavailable

Klim, Z., Ennajimi, E., Balazinski, M., & Fortin, C. (1996). Cutting tool reliability analysis for variable feed milling of 17-4PH stainless steel. Wear, 195(1-2), 206-213. External link

Koclas, J., Sissaoui, M. T., & Hébert, A. (1996). Solution of the improved and generalized quasi-static methods using an analytic calculation or a semiimplicit scheme to compute the precursor equations. Annals of Nuclear Energy, 23(11), 901-907. External link

L

Labelle, H., Dansereau, J., Bellefleur, C., & Poitras, B. (1996). 3-dimensional effect of the boston brace on the thoracic spine and rib cage. Spine, 21(1), 59-64. External link

Labonté, F., Balazinski, M., & Cohen, P. (1996, January). Study on eye movement strategies for a depth discrimination task in a "pseudo"natural context" [Paper]. ARVO Annual Meeting, Fort Lauderdale, FL, USA. Unavailable

Lakis, A. A., Selmane, A., & Toledano, A. (1996, July). Non-linear dynamic analysis of anisotropic cylindrical shells [Paper]. ASME Pressure Vessels and Piping Conference (PVP 1996), Montréal, Québec. Unavailable

Landry, C., De Guise, J. A., Dansereau, J., Labelle, H., Zeller, R., Skalli, W., & Lavaste, F. (1997, January). A methodology for the 3D description of the deformation patterns of scoliotic vertebrae [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Laviolette, D., Nica, A., Chaaban, A., Marchand, L., & Shirazi-Adl, A. (1996, July). Mechanical behavior of pressurized bolted joints subjected to external bending loads [Paper]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Unavailable

Laviolette, D., Nica, A., Chaaban, A., Marchand, L., & Shirazi-Adl, A. (1996, January). Mechanical behaviour of pressurized bolted joints subjected to external bending loads [Paper]. 8th Int. Conference on pressure wessel technology, Montréal, Québec. Unavailable

Le Blanc, M. (1996). Design d'une orthèse à action 3D pour le traitement de la scoliose idiopathique [Master's thesis, École Polytechnique de Montréal]. Unavailable

Lebrun, G., Gauvin, R., & Kendall, K. N. (1996). Experimental investigation of resin temperature and pressure filling and curing in a flat steel RTM mould. Composites Part A: Applied Science and Manufacturing, 27(5), 347-356. External link

Lebrun, G., Gauvin, R., & Kendall, K. N. (1996). Experimental investigation of resin temperature during filling and curing in epoxy and nickel shell resin transfer moulding (rtm) moulds. Journal of Materials Processing and Manufacturing Science, 5(1), 27-44. Unavailable

Lin, Z. Q., Barthakur, N. N., Schuepp, P. H., & Kennedy, G. G. (1996). Uptake and translocation studies in balsam fir seedlings with Mn-54 and Zn-65 radioisotopes applied to soil surfaces. Journal of Environmental Quality, 25(1), 92-96. External link

Lin, Z. Q., Hendershot, W. H., Kennedy, G. G., Dutilleul, P., & Schuepp, P. H. (1996). Total elements in forest soils affected by acid deposition in southern Québec. Canadian Journal of Soil Science, 76(2), 165-171. External link

Loranger, S., Tetrault, M., Kennedy, G. G., & Zayed, J. (1996). Manganese and other trace-elements in urban snow near an expressway. Environmental Pollution, 92(2), 203-211. External link

Lussier, M. (1996). Développement d'un banc d'essai et étude du comportement en fatigue de la quille du pied prothétique space [Master's thesis, École Polytechnique de Montréal]. Unavailable

M

Mamou, M., Robillard, L., Bilgen, E., & Vasseur, P. (1996). Effects of a moving thermal wave on Benard convection in a horizontal saturated porous layer. International Journal of Heat and Mass Transfer, 39(2), 347-354. External link

Mamou, M., Vasseur, P., & Bilgen, E. (1996). Analytical and numerical study of double diffusive convection in a vertical enclosure. External link

Marchand, L., & Derenne, M. (1996, July). Long term performance of elastomeric sheet gasket materials subjected to temperature exposure [Paper]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Unavailable

Marchand, L., Laviolette, D., Derenne, M., Birembaut, Y., & Ledauphin, T. (1996, January). Characterization of two different NPS bolted flanged joints subjected to external bending moments [Paper]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Unavailable

Marcil, É. (1996). Incorporation du déplacement du patient dans la reconstruction radiographique 3-D de la cage thoracique et du rachis humain [Master's thesis, École Polytechnique de Montréal]. Unavailable

Marleau, G. A validation of DRAGON based on lattice experiments [Paper]. 5th International Conference on Simulation Methods in Nuclear Engineering, Montréal, Québec. Unavailable

Marrano, R., Camarero, R., McKenty, F., & Guy, C. (1996, June). The simulation of two-phase flows [Paper]. 4th Annual Conference of the Computational Fluid Dynamics Society of Canada, Ottawa, Ont. Unavailable

Masson, C., Langlois, M., & Paeaschivoiu, I. (1996, September). A linear stability analyser suitable for integration in wing performance calculation procedures [Paper]. 20th congress of the International council of the aeronautical sciences (ICAS 1996), Naples, Italy. Unavailable

Masson, C., Langlois, M., & Paraschivoiu, I. (1995, March). Influence of spanwise pressure gradient on transition prediction in transonic flows [Paper]. IUTAM Symposium on Nonlinear Instability and Transition in Three-Dimensional Boundary Layers, Manchester, UK. External link

Masson, C., Martinuzzi, R., Mirshams, M., & Paraschivoiu, I. (1996). Natural transition in transonic flows using an efficient temporal/spatial formulation. Journal of Aircraft, 33(5), 931-937. External link

Masson, C., Ngassam, P. J., Paraschivoiu, I., & Tezok, F. (1996, June). Transition predictions in separated boundary layers - Comparison with experiments [Paper]. 14th AIAA Applied Aerodynamics Conference, New Orleans, Louisiana. External link

Matuszkiewicz, A., Teyssedou, A., & Tye, P. (1996). Review of heat transfer correlations for the ASSERT thermal-hydraulics code. (Technical Report n° 212). Unavailable

Mayer, J. R. R., Ghazzar, A., & Rossy, O. (1996). 3D characterisation, modelling and compensation of the pre-travel of a kinematic touch trigger probes. Measurement, 19(2), 83-94. External link

Meddad, A. (1996). Analyse de l'endommagement des matériaux multiphasés à matrice viscoélastique [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Meddad, A., & Fisa, B. (1996). Effect of filler-matrix debonding on tensile behavior of glass-beads filled polystyrene (ps). Macromolecular Symposia, 108, 173-182. External link

Mnif, F. (1996). Commande des systèmes robotiques avec contraintes holonomes [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mnif, F., Saad, M., & Boukas, E.-K. (1996). Adaptive sliding-mode approach for force/motion control of manipulators under holonomic constraints. [Une approche adaptative par mode de glissement pour la commande position/force d'un manipulateur robotique sous contraintes holonomiques]. Canadian Journal of Electrical and Computer Engineering, 21(2), 73-80. External link

Moglo, K. E. (1996). Etude des brides boulonnées en matériaux composites [Master's thesis, École Polytechnique de Montréal]. Available

Moreno Palmero, C. J. (1996). Étude sur la détection de la somnolence des conducteurs de véhicule automobile [Master's thesis, École Polytechnique de Montréal]. Unavailable

Moreno, C., Gou, M., Boukas, E.-K., & Laberge-Nadeau, C. (1996, October). Transparent driver's drowsiness detector: an approach [Paper]. World congress on intelligent transportation system, Orlando, Florida. External link

N

Navarro Arias, S. H. (1996). Etude numérique des effets de diffusion directionnels dans le coeur du réacteur Gentilly-2 [Master's thesis, École Polytechnique de Montréal]. Available

Neagu, S. C. (1996). L'effet de la surface libre sur la dynamique des coques cylindriques partiellement remplies de liquide [Master's thesis, École Polytechnique de Montréal]. Unavailable

Noll, J. (1996). Overview of the World-Wide experimental research activities in natural laminar flow. (Technical Report n° EPM-RT-96-16). Restricted access

O

Ozell, B., & Camarero, R. (1996, January). A configurable visualization environment [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link

P

Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Khakatian, B., & Lafferriere, G. (1996, January). Effects of strength on simulation of the trunk motion [Paper]. Advances in bioengineering, ASME WAM, Atlanta. Unavailable

Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Kyakatian, B., & Lafferriere, G. (1996, January). Computational method for simulation of trunk motion [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Wilke, H. J., & Sparto, P. (1996, January). Effects of anatomical models and cost functions used by optimisation models on the predicted spinal load [Paper]. Advances in bioengineering, ASME WAM, Atlanta. Unavailable

Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Wilke, H. J., & Sparto, P. (1996, January). Novel approach to quantify strength and spinal loading using optimization models [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Pellegrin, H., Trépanier, J.-Y., Camarero, R., & Zhang, X. D. (1996, January). The influence of the self-induced magnetic field in circuit breaker arcs [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link

Perrin, M., McKenty, F., Rida, S., & Camarero, R. (1996, June). Experimental and numerical investigation of natural gas non-premixed turbulent flames of industrial scale [Paper]. Combustion Canada 1996, Ottawa (Canada). Unavailable

Petit, Y., Dansereau, J., De Guise, J. A., & Labelle, H. (1997, January). 3-D personalized reconstruction and modelling of human intervertebral facet joints [Paper]. 1st Meeting of the International Research Society of Spinal Deformities (IRSSD 1996), Huddinge, Sweden. External link

Petrovic, I., Benoist, P., & Marleau, G. (1996). Quasi-isotropic reflecting boundary condition for the TIBERE heterogeneous leakage model. Nuclear Science and Engineering, 122(2), 151-166. External link

Piedboeuf, M. C., Gauvin, R., & Trochu, F. (1996, June). Hysteretic behavior of NiTi shape memory alloy as a function of deformation, temperature, and rate of deformation [Paper]. 3rd International Conference on Intelligent Materials and 3rd European Conference on Smart Structures and Materials, Lyon, Fr. External link

Prud'homme, M., & Nguyen, T. H. (1996). Méthode de solution par volumes de contrôle du problème inverse en convection naturelle. (Technical Report n° EPM-RT-96-10). Restricted access

Q

Qaddouri, A., Roy, R., & Goulard, B. Parallel acceleration and rebalancing schemes for solving transport problems using PVM [Paper]. 5th International Conference on Simulation Methods in Nuclear Engineering, Montréal, Québec. Unavailable

Qaddouri, A., Roy, R., Mayrand, M., & Goulard, B. (1996). Collision probability calculation and multigroup flux solvers using PVM. Nuclear Science and Engineering, 123(3), 392-402. External link

R

Robitaille, F., & Gauvin, R. (1996). Compaction of fiber reinforcements for composite manufacturing : a review of analytical results. (Technical Report n° EPM-RT-96-19). Restricted access

Robitaille, F., & Gauvin, R. (1996). Measurement of the compaction and relaxation properties of wet/dry textile reinforcements under hydrostatic pressure : design of the apparatus and data acquisition. (Technical Report n° EPM-RT-96-21). Restricted access

Robitaille, F., Gauvin, R., & Clerk, P. (1996). Compaction of fiber reinforcements for composite manufacturing : a review of experimental results. (Technical Report n° EPM-RT-96-04). Restricted access

Roy, G., Gou, M., Bolullo, O., Ngandui, É., Olivier, G., & Paun, C. (1996). Veille technologique concernant le moteur-roue. (Technical Report n° P2127). Unavailable

Roy, R. (1996). Application of the Bₙ theory to unit cell calculations. Nuclear Science and Engineering, 123(3), 358-368. External link

Roy, R., Hébert, A., & Marleau, G. (1996). Comments on "Investigation of Interface-Current Solution Techniques for Coupled Heterogeneous Cells". Nuclear Science and Engineering, 122(2), 283-285. External link

S

Saygin, H., & Hébert, A. (1996). New self-shielding method based on a detailed cross-section representation in the resolved energy domain. Nuclear Science and Engineering, 122(2), 276-282. External link

Selmane, A. (1996). Analyse par une méthode hybride d'éléments finis des coques cylindriques non-uniformes, anisotropes et contenant un liquide en écoulement [Ph.D. thesis, École Polytechnique de Montréal]. Available

Shen, Y. (1996). Combining fuzzy logic and neural networks for decision support in an industrial environment [Master's thesis, École Polytechnique de Montréal]. Available

Shirazi-Adl, A. (1996, January). Role of facet articulation in mechanics of the lumbar spine- significance of facet gap distance [Paper]. Advances in bioengineering, ASME WAM, Atlanta. Unavailable

Shirazi-Adl, A., & Parnianpour, M. (1996, January). Response of the lumbar spine in large compression loads-stability demands in neutral postures [Paper]. Advances in bioengineering ASME WAM, Atlanta. Unavailable

Shirazi-Adl, A., & Parnianpour, M. (1996). Role of posture in mechanics of the lumbar spine in compression. Journal of spinal disorders, 9(4), 277-286. External link

Shirazi-Adl, A., & Parnianpour, M. (1996). Stabilizing role of moments and pelvic rotation on the human spine in compression. Journal of Biomechanical Engineering, 118(1), 26-31. External link

Shirazi-Adl, A., & Ranu, H. S. (1996, January). Correlation of volume-pressure relationship in lumbar spinal discs using both 3-D model and experimental studies [Paper]. Advances in bioengineering, ASME WAM, Atlanta. Unavailable

St-Georges, L. (1996). Instabilité dynamique et résonances paramétriques de plaques géométriquement imparfaites [Master's thesis, École Polytechnique de Montréal]. Available

T

Tran, P., Brahimi, M. T., Tezok, F., & Paraschivoiu, I. (1996, January). Numerical simulation of ice accretion on multiple element configurations [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link

Tremblay, P. (1996). Estimation d'erreur et contrôle du maillage appliqués à la simulation d'écoulement dans des joints hydrauliques [Master's thesis, École Polytechnique de Montréal]. Unavailable

Trépanier, J.-Y., Paraschivoiu, M., Reggio, M., & Camarero, R. (1996). A conservative shock fitting method on unstructured grids. Journal of Computational Physics, 126(2), 421-433. External link

Trochu, F., Abong, Y., Balazinski, M., & Larbrisseau, P. (1996). Rough machining of free-form surfaces defined by dual kriging. International Journal of Production Research, 34(6), 1603-1623. External link

Trochu, F., Brailovski, V., & Terriault, P. (1996). Shape memory alloys : fundamentals and modeling. (Technical Report n° EPM-RT-97-01). Restricted access

Trochu, F., Brailovski, V., Meunier, M. A., Terriault, P., & Qian, Y. Y. (1996). Thermomechanical analysis of shape memory devices. Bio-Medical Materials and Engineering, 6(6), 389-403. External link

Trochu, F., Brailovskii, V., Quian, Y.-Y., Terriault, P., & Meunier, M.-A. (1996). Computer modeling of parts and devices with the memory shape. Zhurnal Tekhnicheskoi Fiziki, 66(11), 186-189. Unavailable

Trochu, F., Brailovskii, V., Yaoyan, K., Terriault, P., & Meunier, M. (1996). Computer modeling of parts and devices with shape memory. Technical physics, 41(11), 1186-1188. Unavailable

Trochu, F., Hammami, A., & Benoit, Y. (1996). Prediction of fibre orientation and net shape definition of complex composite parts. Composites Part A: Applied Science and Manufacturing, 27(4), 319-328. External link

Trochu, F., Meunier, M.-A., & Charbonnier, P. (1996). Modeling of thermomechanical fatigue behavior in shape memory alloy using dual kriging. Materials and Design, 17(3), 133-139. External link

Trochu, F., Qian, Y.-Y., & Terriault, P. (1996, August). Numerical analysis on shape memory alloys for industrial applications [Paper]. Processes in advanced materials and mechanics : International conference on advanced materials, Beijing, China. Unavailable

Turcot, D. (1996). Développement d'une méthode d'essai pour évaluer les équipements de protection contre les scies à chaînes [Master's thesis, École Polytechnique de Montréal]. Available

Tye, P., Teyssedou, A., Troche, N., & Kiteley, J. (1996, January). Numerical study of the influence of the void drift model on the predictions of the ASSERT subchannel code [Paper]. 5th International Conference on Simulation Methods in Nuclear Engineering, Montréal, Québec. Unavailable

U

Urquiza Beltran, G. (1996). Etude de l'écoulement et du transfert de chaleur dans les cavités cylindriques en rotation [Ph.D. thesis, École Polytechnique de Montréal]. Available

W

Wang, J. L., Shirazi-Adl, A., Parnianpour, M., & Engin, A. E. (1996, January). Development of the viscoelastic finite model of lumbar motion segment [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Wang, J. L., Shirazi-Adl, A., Parnianpour, M., & Engin, A. E. (1996, January). Dynamic response of an L2-L3 motion segment to compressive cyclic loading using a nonlinear viscoelastic finite element model [Paper]. Advances in bioengineering ASME WAM, Atlanta. Unavailable

Wang, J. L., Shirazi-Adl, A., Parnianpour, M., & Wilke, H. J. (1996, January). Dynamic response at creep and relaxation of motion segment L2-L3 by the viscoelastic finite element modelling [Paper]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Unavailable

Z

Zayed, J., Mikhail, M., Loranger, S., Kennedy, G. G., & L'Espérance, G. (1996). Exposure of taxi drivers and office workers to total and respirable manganese in an urban-environment. American Industrial Hygiene Association Journal, 57(4), 376-380. External link

Zha, G. C., & Bilgen, E. (1996). Numerical study of 3-dimensional flows using unfactored upwind-relaxation sweeping algorithm. Journal of Computational Physics, 125(2), 425-433. External link

Zhang, X. D., Trépanier, J.-Y., & Camarero, R. (1996, January). Revisiting the streamwise upwind method for the Euler equations [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Zhang, X. D., Trépanier, J.-Y., & Camarero, R. (1996, January). A space-time reconstruction algorithm for steady and unsteady and Euler equations [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Zhang, X. D., Trépanier, J.-Y., Reggio, M., Benmededour, A., & Camarero, R. (1995, January). Grid influence on upwind schemes for the Euler and Navier-Stokes equations [Paper]. AIAA : American Institute of Aeronautics and Astronautics Aerospace Sciences Meeting Conference, Reno, NV. Published in AIAA journal, 34(4). External link

Zhao, M. (1996). Natural and mixed convection in a horizontal circular cylinder [Ph.D. thesis, École Polytechnique de Montréal]. Available

Zhao, M., Robillard, L., & Prud'homme, M. (1996). Effect of weak rotation on natural convection in a horizontal porous cylinder. External link

Zouani, A., Bui-Quoc, T., & Bernard, M. (1996). Optimal design of a disk-shaped specimen for biaxial-tensile fatigue testing. Journal of testing and evaluation, 24(5), 287-294. External link

Zouani, A., Bui-Quoc, T., & Bernard, M. (1996, July). Proposed biaxial-tensile device for fatigue testing [Paper]. 1996 ASME Pressure Vessels and Piping Conference, Montréal, Québec. Unavailable

List generated on: Thu Sep 21 08:20:32 2023 EDT