 | Monter d'un niveau |
Abdali, H., & Ajji, A. (2017). Preparation of electrospun nanocomposite nanofibers of polyaniline/poly(methyl methacrylate) with amino-functionalized graphene. Polymers, 9(9). Disponible
Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2017). Combined effect of epoxy functionalized graphene and organomontmorillonites on the morphology, rheological and thermal properties of poly (butylenes adipate-co-terephtalate) with or without a compatibilizer. Applied Clay Science, 146, 306-315. Lien externe
Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial activity of neat chitosan powder and flakes. Molecules, 22(1), 1-19. Disponible
Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Effect of Chitosan Physical Form on Its Antibacterial Activity Against Pathogenic Bacteria. Journal of Food Science, 82(3), 679-686. Lien externe
Arias, A., Sojoudiasli, H., Heuzey, M.-C., Huneault, M. A., & Wood-Adams, P. (2017). Rheological study of crystallization behavior of polylactide and its flax fiber composites. Journal of Polymer Research, 24(3), 10 pages. Lien externe
Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial electrospun chitosan-based nanofibers: A bacterial membrane perforator. Food Science & Nutrition, 5(4), 865-874. Disponible
Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Mechanism of action of electrospun chitosan-based nanofibers against meat spoilage and pathogenic bacteria. Molecules, 22(4). Disponible
Assaf, B., Sobotka, V., & Trochu, F. (2017). Measurement of the in-plane thermal conductivity of long fiber composites by inverse analysis. Open Journal of Composite Materials, 7(2), 85-99. Disponible
Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Disponible
Chizari, K., Arjmand, M., Liu, Z., Sundararaj, U., & Therriault, D. (2017). Three-dimensional printing of highly conductive polymer nanocomposites for EMI shielding applications. Materials Today Communications, 11, 112-118. Disponible
Heshmati, V., & Favis, B. D. (2017). High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility. Polymer, 123, 184-193. Lien externe
Heshmati, V., Zolali, A. M., & Favis, B. D. (2017). Morphology development in poly (lactic acid)/polyamide11 biobased blends: chain mobility and interfacial interactions. Polymer, 120, 197-208. Lien externe
Jauzein, T., Huneault, M. A., & Heuzey, M.-C. (2017). Crystallinity and mechanical properties of polylactide/ether-amide copolymer blends. Journal of Applied Polymer Science, 134(14), 10 pages. Lien externe
Jégat, C., Virgilio, N., & Favis, B. D. (2017). Self-assembly of oil microdroplets at the interface in co-continuous polymer blends. European Polymer Journal, 93, 259-271. Lien externe
Karaki, M., Hallal, A., Younès, R., Trochu, F., & Lafon, P. (2017). In-plane permeability prediction model for non-crimp and 3D orthogonal fabrics. Journal of the Textile Institute, 109(8), 1110-1126. Lien externe
Karami, S., & Lafleur, P. (2017). Effect of strain-induced molecular ordering on mechanical performance and barrier properties of polylactide nanocomposites. Journal of Polymer Science, Part B: Polymer Physics, 55(24), 1865-1876. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). Gelation of crystalline nanocellulose in the presence of hydroxyethyl cellulose. Canadian Journal of Chemical Engineering, 95(10), 1891-1900. Lien externe
Li, X., Ghavidel Mehr, N., Guzman-Morales, J., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (2017). Cationic osteogenic peptide P15-CSP coatings promote 3-D osteogenesis in poly(epsilon-caprolactone) scaffolds of distinct pore size. Journal of Biomedical Materials Research Part A, 105(8), 2171-2181. Lien externe
Madra, A., Breitkopf, P., Rassineux, A., & Trochu, F. (2017). Image-based model reconstruction and meshing of woven reinforcements in composites. International Journal for Numerical Methods in Engineering, 112(9), 1235-1252. Lien externe
Moayeri, A., & Ajji, A. (2017). High capacitance carbon nanofibers from poly(acrylonitrile) and poly(vinylpyrrolidone)-functionalized graphene by electrospinning. Journal of Nanoscience and Nanotechnology, 17(3), 1820-1829. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Effect of Processing Conditions on the Cellular Morphology of Polypropylene Foamed Films for Piezoelectric Applications. Cellular Polymers, 36(1), 13-34. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties improvement using post-processing thermomechanical treatment. Journal of Applied Polymer Science, 134(10). Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties prediction using dynamic mechanical analysis. Polymers for Advanced Technologies, 28(4), 476-483. Lien externe
Najarzadeh, Z., & Ajji, A. (2017). Role of molecular architecture in interfacial self-adhesion of polyethylene films. Journal of Plastic Film & Sheeting, 33(3), 235-261. Lien externe
Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies. European Polymer Journal, 90, 231-244. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers. Cellulose, 24(7), 2877-2893. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., Kamal, M. R., & Sain, M. M. (2017). Enhanced properties of poly(ethylene oxide)/cellulose nanofiber biocomposites. Cellulose, 24(2), 755-767. Lien externe
Sojoudiasli, H., Heuzey, M.-C., Carreau, P., & Riedl, B. (2017). Rheological behavior of suspensions of modified and unmodified cellulose nanocrystals in dimethyl sulfoxide. Rheologica Acta, 56(7-8), 673-682. Lien externe
Tighzert, W., Habi, A., Ajji, A., Sadoun, T., & Daoud, F. B.-O. (2017). Fabrication and characterization of nanofibers based on poly(lactic acid)/chitosan blends by electrospinning and their functionalization with phospholipase A1. Fibers and Polymers, 18(3), 514-524. Lien externe
Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. Lien externe
Wang, C.-S., Virgilio, N., Wood-Adams, P., & Heuzey, M.-C. (2017). A mechanism for the synergistic gelation properties of gelatin B and xanthan gum aqueous mixtures. Carbohydrate Polymers, 175(Supplement), 484-492. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Continuity, morphology and surface resistivity in binary blends of poly(ether-block-amide) with polyethylene and polystyrene. European Polymer Journal, 91, 197-211. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Controlling the continuity and surface migration of conductive poly(ether-block-amide) in melt processed cast-film blends. Polymer, 136, 224-234. Lien externe
Wang, S., Ajji, A., Guo, S., & Xiong, C. (2017). Preparation of microporous polypropylene/titanium dioxide composite membranes with enhanced electrolyte uptake capability via melt extruding and stretching. Polymers, 9(3), 110. Disponible
Zolali, A. M., & Favis, B. D. (2017). Compatibilization and toughening of co-continuous ternary blends via partially wet droplets at the interface. Polymer, 114, 277-288. Lien externe
Zolali, A. M., & Favis, B. D. (2017). Partial to complete wetting transitions in immiscible ternary blends with PLA: the influence of interfacial confinement. Soft Matter, 13(15), 2844-2856. Lien externe
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (juillet 2017). Growth of thin films via atmospheric UVC-driven syngas PICVD [Communication écrite]. 23rd International Symposium on Plasma Chemistry (ISPC 2017), Montréal, Canada (3 pages). Lien externe
Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (juillet 2017). Fiber-level bi-axial braid simulation for braid-trusion [Communication écrite]. 10th Canadian International Conference on Composites (CANCOM 2017), Ottawa, Ontario. Disponible
Madra, A., Breitkopf, P., & Trochu, F. (août 2017). Automatic detection and classification of defects in woven composites manufactured by RTM based on X-ray microtomography [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China (7 pages). Lien externe
Nofar, M., Tabatabaei, A., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (mai 2017). Wide-range of microcellular bead foams from different PLA-based drop/sea blend morphologies [Communication écrite]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Lien externe
Gancheva, T., & Virgilio, N. (juin 2017). Highly porous stimuli-sensitive hydrogels embedded with metal nanoparticles : towards micro-reactors with enhanced catalytic properties [Affiche]. CREPEC Annual Student Colloquium, Montréal, Québec. Non disponible
Mazerolles, T., Heuzey, M.-C., Soliman, M., Martens, H., Kleppinger, R., & Huneault, M. A. (décembre 2017). Development of co-continuous morphology in blends of thermoplastic starch and low-density polyethylene [Résumé]. 33rd Annual Meeting of Polymer Processing Society (PPS-33), Cancun, Mexico. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (décembre 2017). Reinforcing effect of cellulose nanofibers on biopolymers [Résumé]. 33rd Annual Meeting of Polymer Processing Society (PPS-33), Cancun, Mexico (1 page). Lien externe
Klotz, T., Delbergue, D., Miao, H., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Analytical fatigue life prediction of shot peened Inconel 718 [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Miao, H., Canals, L., McGilivray, B., & Lévesque, M. (septembre 2017). Comparison between vibratory peening and shot peening process [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
Miao, H., Klotz, T., Delbergue, D., & Lévesque, M. (septembre 2017). Finite element simulation of shot peened residual stress relaxation under low and high cycle loading [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
Miao, H., Mendez Romero, J. A., Forgues, S., & Lévesque, M. (septembre 2017). Experimental and numerical study of needle peening effects in aluminum alloy 2024-T3 sheets [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
