 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Saghaei, M., Fotsing, E. R., Ross, A., & Fradette, L. (2024). Production of monodisperse large drop emulsions by means of high internal phase pickering emulsions ─ processing and formulation. Industrial & Engineering Chemistry Research, 63(42), 17917-17929. Disponible
Ait Aariba, A., Ross, A., Fotsing, E. R., & Mardjono, J. (2024). Improving acoustic absorption modeling of additively manufactured microperforated panels through kriging-based approaches. NOISE-CON proceedings, 270(7), 4080-4091. Lien externe
El Hajj, E., Rastegar Dehkordi, N., Flores Salinas, M., Fotsing, E. R., Ross, A., & Vidal, D. (2024). Numerical study of thermo-viscous effects in acoustic materials using linearized Navier-Stokes equations. NOISE-CON proceedings, 270(3), 8577-8585. Lien externe
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal, 29(6), 1230-1239. Disponible
Khalfi, B., Nasraoui, M. T., Chakhari, J., Ross, A., & Chafra, M. (2023). Dynamic behavior of cylindrical shell with partial constrained viscoelastic layer damping under an impact load. Acta Mechanica, 234(5), 2125-2143. Lien externe
Cossin, M., Ross, A., & François, P. (2023). The influence of board bending and recoil effect on circus performance in Korean teeterboard. Applied Mechanics and Materials, 915, 71-80. Lien externe
Cossin, M., Ross, A., & Prince, F. (2023). The Influence of the Board Bending and Recoil Effect on Circus Performance in Korean Teeterboard. Applied Mechanics and Materials, 915, 71-80. Lien externe
Cossin, M., Ross, A., & Prince, F. (2023). A kinematic analysis of jumping technique in elite Korean teeterboard athletes: a case-study. Sports Biomechanics, 22(2), 246-254. Lien externe
Fernandez-Escudero, C., Prothin, S., Laurendeau, É., Ross, A., & Michon, G. (2023). Nonlinear flap for passive flutter control of bidimensional wing. JVC/Journal of Vibration and Control. Lien externe
Ben Lassoued, M. A., Ross, A., & Michon, G. (2023). Vibration confinement and localization patterns in weakly coupled oscillators with parameter gradients. Journal of Sound and Vibration, 549, 117590 (11 pages). Lien externe
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages). Disponible
Cossin, M., Bergeron-Parenteau, A., & Ross, A. (2022). Maximal dynamic forces exerted by acrobats on nine circus apparatuses. Circus: Arts, Life, and Sciences, 1(1). Disponible
Boulvert, J., Humbert, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2022). Perfect, broadband, and sub-wavelength absorption with asymmetric absorbers: Realization for duct acoustics with 3D printed porous resonators. Journal of Sound and Vibration, 523, 116687 (21 pages). Lien externe
Brzeski, D., Hia, I. L., Chauvette, J.-F., Farahani, R. D., Piccirelli, N., Ross, A., & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages. Lien externe
Cossin, M., Ross, A., & Prince, F. (2021). Effect of jump heights, landing techniques, and participants on vertical ground reaction force and loading rate during landing on three different Korean teeterboards. Proceedings of the Institution of Mechanical Engineers Part P-Journal of Sports Engineering and Technology, 1754337121 (9 pages). Lien externe
Boulvert, J., Costa-Baptista, J., Cavalieri, T., Perna, M., Fotsing, E.-R., Romero-García, V., Gabard, G., Ross, A., Mardjono, J., & Groby, J.-P. (2020). Acoustic modeling of micro-lattices obtained by additive manufacturing. Applied Acoustics, 164, 9 pages. Lien externe
Oulmane, A., & Ross, A. (2020). Effects of material parameters on the transient dynamics of an impacted plate with partial constrained layer damping treatment. Journal of the Acoustical Society of America, 147(3), 1939-1952. Lien externe
Boulvert, J., Costa-Baptista, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Perna, M., Mardjono, J., & Groby, J.-P. (2020). Folded metaporous material for sub-wavelength and broadband perfect sound absorption. Applied Physics Letters, 117(25), 6 pages. Lien externe
Aujogue, N., Ross, A., & Attendu, J.-M. (2020). Time-space domain nearfield acoustical holography for visualizing normal velocity of sources. Mechanical Systems and Signal Processing, 139, 106363 (13 pages). Lien externe
Fotsing, E.-R., Dubourg, A., Ross, A., & Mardjono, J. (2019). Acoustic properties of periodic micro-structures obtained by additive manufacturing. Applied Acoustics, 148, 322-331. Lien externe
Butler, S., Fotsing, E. -R., & Ross, A. (2019). Acoustic thermoset open-cell foams produced by particulate leaching process. Journal of Materials Science, 54(19), 12553-12572. Lien externe
Pichon, H., Piollet, E., & Ross, A. (2019). An acoustic trade-off chart for the design of multilayer acoustic packages. Applied Acoustics, 148, 9-18. Lien externe
Fotsing, E.-R., Rezabeigi, E., Ross, A., Wood-Adams, P. M., & Drew, R. A. L. (2019). Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion. Journal of Porous Materials, 26(6), 1781-1794. Lien externe
Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Michon, G., & Ross, A. (2019). Comparison of low, medium and high fidelity numerical methods for unsteady aerodynamics and nonlinear aeroelasticity. Journal of Fluids and Structures, 91, 12 pages. Lien externe
Piollet, E., Fotsing, E.-R., Ross, A., & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366. Lien externe
Boulvert, J., Cavalieri, T., Costa-Baptista, J., Schwan, L., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2019). Optimally graded porous material for broadband perfect absorption of sound. Journal of Applied Physics, 126(17), 15 pages. Lien externe
Cossin, M., Ross, A., & Gosselin, F. (2018). Repeatability of force signals in aerial circus straps. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 232(3), 225-235. Lien externe
Attendu, J.-M., & Ross, A. (2018). Sparse regularization for reconstructing transient sources with time domain nearfield acoustical holography. Journal of the Acoustical Society of America, 143(6), 3796-3806. Lien externe
Attendu, J.-M., & Ross, A. (2018). Time domain nearfield acoustical holography with three-dimensional linear deconvolution. Journal of the Acoustical Society of America, 143(3), 1672-1683. Lien externe
Boudreault, Y., Carré, C., Farand, P., Forest, L., Lafleur, P., & Ross, A. (2017). Différentes méthodes d'apprentissage actif pour une diversité d'apprenants. Proceedings of the Canadian Engineering Education Association (CEEA), 5 pages. Disponible
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Lien externe
Cossin, M., Ross, A., & Gosselin, F. (2017). Making single-point aerial circus disciplines safer. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231(4), 362-373. Lien externe
Attendu, J.-M., & Ross, A. (2017). Method for finding optimal exponential decay coefficient in numerical Laplace transform for application to linear convolution. Signal Processing, 130, 47-56. Lien externe
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Lien externe
Attendu, J. M., & Ross, A. (2017). Time domain nearfield acoustical holography without wrap-around error and spectral leakage for forward propagation. Journal of the Acoustical Society of America, 141(2), 1039-1050. Lien externe
Sommier, E., Fotsing, E.-R., Ross, A., & Lavoie, M. (2016). Characterization of the injection molding process of passive vibration isolators. Journal of Elastomers and Plastics, 48(1), 58-79. Lien externe
Fotsing, E. R., Leclerc, C., Sola, M., Ross, A., & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239. Lien externe
Khalfi, B., & Ross, A. (2016). Transient and harmonic response of a sandwich with partial constrained layer damping: A parametric study. Composites Part B: Engineering, 91, 44-45. Lien externe
Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (2015). Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters. Journal of Fluids and Structures, 56, 56-74. Lien externe
Fotsing, E. R., Ross, A., & Ruiz, E. (2014). Characterization of surface defects on composite sandwich materials based on deflectrometry. NDT & E International, 62, 29-39. Lien externe
Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825. Lien externe
Khalfi, B., & Ross, A. (2013). Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich. International Journal of Solids and Structures, 50(25-26), 4133-4144. Lien externe
Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511. Lien externe
Khalfi, B., & Ross, A. (2013). Transient response of a plate with partial constrained viscoelastic layer damping. International Journal of Mechanical Sciences, 68, 304-312. Lien externe
Fotsing, E. R., Miron, F., Eury, Y., Ross, A., & Ruiz, E. (2012). Bonding Analysis of Carbon/Epoxy Composites With Viscoelastic Acrylic Adhesive. Composites Part B: Engineering, 43(5), 2087-2093. Lien externe
Granger, D., & Ross, A. (2009). Effects of partial constrained viscoelastic layer damping parameters on the initial transient response of impacted cantilever beams: experimental and numerical results. Journal of Sound and Vibration, 321(1-2), 45-64. Lien externe
Blais, J.-F., & Ross, A. (2009). Forward projection of transient sound pressure fields radiated by impacted plates using numerical Laplace transform. Journal of the Acoustical Society of America, 125(5), 3120-3128. Lien externe
Blais, J.-F., Cimmino, M., Ross, A., & Granger, D. (2009). Suppression of time aliasing in the solution of the equations of motion of an impacted beam with partial constrained layer damping. Journal of Sound and Vibration, 326(3-5), 870-882. Lien externe
Béguin, C., Anscutter, F., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204. Lien externe
Mahvash, A., & Ross, A. (2008). Application of Chmms to Two-Phase Flow Pattern Identification. Engineering Applications of Artificial Intelligence, 21(8), 1144-1152. Lien externe
Mahvash, A., & Ross, A. (2008). Two-Phase Flow Pattern Identification Using Continuous Hidden Markov Model. International Journal of Multiphase Flow, 34(3), 303-311. Lien externe
Gravelle, A., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2007). Damping of Tubes Due to Internal Two-Phase Flow. Journal of Fluids and Structures, 23(3), 447-462. Lien externe
Ross, A., & Ostiguy, G. (2007). Propagation of the Initial Transient Noise From an Impacted Plate. Journal of Sound and Vibration, 301(1-2), 28-42. Lien externe
Ross, A., Amram, M., & Ostiguy, G. L. (2001). Benefits of Vac Damps over adhesive bonded damping pads for impact noise control. Applied Acoustics, 62(7), 813-830. Lien externe
Ross, A., Ostiguy, G. L., & Amram, M. (1999). New signal processing developments for low cost near-field acoustical holography systems. Noise Control Engineering Journal, 47(1), 28-44. Lien externe
Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (juillet 2024). Parametric investigation of energy harvester design - piezoelectric coverage and cantilever length [Communication écrite]. 30th International Congress on Sound and Vibration (ICSV 2024), Amsterdam, Netherlands. Non disponible
Rastegar, N., De Cicco, D., Vidal, D., & Ross, A. (octobre 2023). Accoustic metamaterials for low-frequency noise resuction : a review [Communication écrite]. Acoustics Week in Canada 2023 Conference (AWC 2023), Montréal, Québec. Publié dans Canadian Acoustics, 51(3). Lien externe
Chang, T., Verduyckt, I., & Ross, A. (septembre 2023). Impact of the Visual Clutter of a Room on Francophone Speakers' Speech Production and Perception (Extended Abstract) [Communication écrite]. 10th Convention of the European Acoustics Association (EAA 2023), Torino, Italy (2 pages). Lien externe
Choudhary, R., Rzig, I., Roland-Fotsing, E., & Ross, A. (juillet 2023). Investigation of the electromechanical coupling nonlinearity in piezoelectric energy harvester [Communication écrite]. 29th International Congress on Sound and Vibration (IIAV 2023), Prague, Tcheque Republic (8 pages). Non disponible
Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (juillet 2022). Investigation of the effect of piezoelectric material nonlinearity on unimorph energy harvester [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022), Singapore. Non disponible
Costa-Baptista, J., Fotsing, E. R., Mardjano, J., Therriault, D., & Ross, A. (juillet 2022). Multilayered microchannels for high absorption at different frequency ranges [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022). Non disponible
Boulvert, J., Costa-Baptista, J., Fotsing, E.-R., Cavalieri, T., Romera-García, V., Gabard, G., Ross, A., Mardjono, J., & Croby, J.-P. (mars 2021). 3D printed folded porous material for sub-wavelength absorption of sound [Communication écrite]. 6th Symposium on the Acoustics of Poro-Elastic Materials (SAPEM 2020) (2 pages). Lien externe
Boulvert, J., Té, H., Romero-García, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J. P. (septembre 2021). Asymmetric Metaporous Treatment: Optimization for Perfect Sound Absorption, 3D Printing, and Characterization with Air Flow [Communication écrite]. 15th International Congress on Artificial Materials for Novel Wave Phenomena (METAMATERIALS 2021), New York, N.Y.. Lien externe
Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D., & Ross, A. (août 2021). Multilayer treatment for subwavelength and broad absorption [Communication écrite]. 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA. Lien externe
Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Ross, A., & Michon, G. (janvier 2019). Experimental and Numerical Aeroelastic Analysis of Airfoil-Aileron System with Nonlinear Energy Sink [Communication écrite]. 37th IMAC, A Conference and Exposition on Structural Dynamics, Orlando, FL, United states. Lien externe
Butler, S., Fotsing, E. R., & Ross, A. (juillet 2019). Acoustic thermoset open-cell multilayer foams produced by a particulate leaching process [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Costa-Baptista, J., Fotsing, E. R., Therriault, D., & Ross, A. (juillet 2019). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Lassoued, M. A. B., Abbad, A., Ross, A., & Michon, G. (juillet 2019). Numerical and experimental vibration of a sandwich beam with a functionally graded core [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Boulvert, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J.-P. (juillet 2019). Numerical optimization method of continuously graded porous material [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Abbad, A., Lassoued, M.-A. B., Michon, G., & Ross, A. (juillet 2019). On the use of 3D printed architected core in sandwich structure for vibration control [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Aujogue, N., & Ross, A. (juillet 2019). Transient force analysis technique to identify time-varying loads and defects on plates [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Pichon, H., Piollet, E., & Ross, A. (juillet 2019). Visualizing trade-offs to improve multilayer acoustic package design [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Lien externe
Letarte, A., Joncas, S., Ross, A., & Martin, F. (janvier 2016). Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing [Communication écrite]. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (AIAA SciTech 2016), San Diego, CA. Lien externe
Piollet, E., Laroche, S., Bianki, M.-A., & Ross, A. (août 2016). A mobile reverberation cabin for acoustic measurements in an existing anechoic room [Communication écrite]. 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (INTER-NOISE 2016), Hamburg, Germany. Non disponible
Attendu, J.-M., & Ross, A. (août 2016). Time-domain near-field acoustical holography as a means to prevent exposition to harmful industrial impact noises [Communication écrite]. 24e Congrès international de mécanique théorique et appliquée (ICTAM 2016), Montréal, Québec. Non disponible
Pupin, C., Ross, A., Ruiz, E., Billotte, C., Rietsch, J.-C., Bricourt, P., & Vernet, N. (juillet 2015). Porosity control by process parameters [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (juillet 2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (juillet 2013). Formation of porosities in RTM by VOCS and water vapour [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Leclerc, C., Fotsing, E. R., & Ross, A. (juillet 2013). Modal analysis of composite sandwich structures with viscoelastic layers [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (juin 2011). Facteurs d'influence des choix d'études en génie dees femmes [Communication écrite]. Colloque international HELENA Formation interdisciplinaire des ingénieurs et problème du genre (GIEE 2011), Paris, France. Lien externe
Fotsing, R., Sola, M., Ross, A., & Ruiz, E. (juillet 2011). Lightweight damping treatment of composite sandwich beams [Communication écrite]. 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil. Non disponible
Nowlan, I., Ross, A., & Pettigrew, M. J. (juillet 2009). Dynamic interaction between a straight tube and an anti-vibration bar [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Béguin, C., Wehbe, J., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2009). Influence of viscosity, density and surface tension on two-phase damping [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (novembre 2009). La chaire Marianne-Mareschal à l'École Polytechnique de Montréal [Communication écrite]. 2nd International PROMETEA Conference, Paris, France. Non disponible
Nowlan, I., Ross, A., & Pettigrew, M. J. (juin 2008). Dynamics of a steam generator tube supported by an anti-vibration bar [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Béguin, C., Ross, A., Pettigrew, M. J., & Langre, E. (juin 2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Two-phase damping and interface surface area in tubes with internal flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages). Lien externe
Oulmane, A., Farah, É., & Ross, A. (mai 2005). Dynamic modeling of a viscoelastic sandwich [Communication écrite]. 20e Congrès canadien de mécanique appliquée, Montréal, Québec. Non disponible
Ross, A., & Boudreau, M.-J. (octobre 2004). Expériences sur le niveau de bruit des ventilateurs domestiques personnels [Communication écrite]. Semaine canadienne d'acoustique, Ottawa. Lien externe
Ross, A., & Cormier, M. (juillet 2004). Natural frequencies of a discontinuous viscoelastic sandwich [Communication écrite]. 11th International Congress on Sound and Vibration, St-Petersbourg, Russie. Non disponible
Ross, A., & Roy, J.-F. (juillet 2004). Vibration of the constraining layer of a surface damping pad [Communication écrite]. 11th International Congress on Sound and Vibration, St-Petersbourg, Russie. Non disponible
Ross, A., Ostiguy, G., & Amram, M. (juin 2003). Délimitation du bruit d'accélération provenant d'une structure flexible [Communication écrite]. Canadian Congress of Applied Mechanics (CANCAM 2003), Calgary, Canada. Non disponible
Roy, J. F., Ross, A., & Ostiguy, G. (janvier 2003). On the effects of vacuum applied damping Ppds on flexural wave speed [Communication écrite]. 19e Congrès canadien de mécanique appliquée, Calgary, Canada. Non disponible
Roy, J.-F., & Ross, A. (juillet 2002). Observation of the acoustic and flexural waves reflected upon the thickness discontinuity of an impacted plate [Communication écrite]. 9th International Congress on Sound and Vibration, Orlando, Florida. Non disponible
Ross, A., Roy, J.-F., & Ostiguy, G. (octobre 2002). On the mechanical behaviour of vacuum applied surface treatments [Communication écrite]. Semaine canadienne d'acoustique, Charlottetown, P.E.I.. Lien externe
Ross, A., Ostiguy, G., & Amram, M. (janvier 2002). Properties of the transient acoustic field of an impacted plate [Communication écrite]. 9th International Congress on Sound and Vibration, Orlando. Florida. Non disponible
Ross, A., Ostiguy, G., & Amram, M. (janvier 2001). Effets d'une discontinuité d'épaisseur sur la propagation des ondes de flexion [Communication écrite]. 18e Congrès canadien de mécanique appliquée, Newfoundland. Non disponible
Amram, M., Ross, A., & Ostiguy, G. (janvier 2001). Impact noise control by microfriction damping using vaccum applied dampers called [Communication écrite]. 8th International Congress on Sound and Vibration, Hong Kong. Non disponible
Ross, A. (2000). Visualisation et optimisation des effets des vac damps sur le champ vectoriel d'intensité acoustique d'une structure soumise à des impacts répétés [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A., & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method. [Panneau acoustique et procédé de fabrication associé]. (Demande de brevet no CA3084631). Lien externe
