<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Gauvin, Raymond"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : 2016 | 2008 | 2007 | 2006 | 2004 | 2003 | 2002 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1992 | 1991 | 1981 | 1980 | 1976
Nombre de documents: 86

2016

Gauvin, R. (2016). Investigating the Thermoformability of Uhmw-Polyethylene. Journal of Plastic Film & Sheeting, 3(4), 312-324. Lien externe

2008

Sha, G., Lee, K. E., Charbonneau, C., Demopoulos, G. P., Gauvin, R., & Savadogo, O. (juin 2008). Low-temperature fabrication of TiO₂ nanocrystalline film electrodes for dye-sensitized solar cells [Communication écrite]. 7th International Symposium on New Materials for Electrochemical Systems, Montréal, Québec. Non disponible

2007

Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (octobre 2007). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Communication écrite]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie. Non disponible

2006

Achim, V., Soukane, S., Gauvin, R., & Trochu, F. (août 2006). Optimization of liquid composite molding based on a mold coefficient concept [Communication écrite]. 6th Canada-Japan Workshop on Composites, Toronto, Canada. Non disponible

2004

Boukhili, R., Boukehili, H., Gauvin, R., Ben Daly, H., & Gasmi, A. Effect of Fillers and Low Profile Additives on the Bending of Pultruded Composites [Communication écrite]. High Performance Structures and Materials II. Lien externe

Ruiz, E., Trochu, F., & Gauvin, R. (2004). Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM. Advanced Composites Letters, 13(1), 49-57. Lien externe

Ruiz, E., Gauvin, R., & Trochu, F. (septembre 2004). Processing stresses and thermal optimization in resin transfer molding [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan. Non disponible

2003

Breard, J., Henzel, Y., Trochu, F., & Gauvin, R. (2003). Analysis of Dynamic Flows Through Porous Media. Part I: Comparison Between Saturated and Unsaturated Flows in Fibrous Reinforcements. Polymer Composites, 24(3), 391-408. Lien externe

Breard, J., Henzel, Y., Trochu, F., & Gauvin, R. (2003). Analysis of Dynamic Flows Through Porous Media. Part II: Deformation of a Double-Scale Fibrous Reinforcement. Polymer Composites, 24(3), 409-421. Lien externe

Ruiz, E., Trochu, F., & Gauvin, R. (novembre 2003). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 5th International Symposium on Advanced Composites, Corfu, Greece. Non disponible

2002

Soulati, K., & Gauvin, R. (mai 2002). Experimental evaluation of composite-concrete interface properties using sandwich specimen [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe

1999

Gauvin, R., & Robitaille, F. (1999). Compaction of textile reinforcements for composites manufacturing. III. Reorganization of the fiber network. Polymer Composites, 20(1), 48-61. Lien externe

Henzel, Y., Bréard, J., Faitout, P., Cayeux, D., & Gauvin, R. (1999). Dynamique des écoulements en milieux poreux double échelle. Comptes Rendus De l'Academie Des Sciences Série II Fascicule B- Mécanique Physique Astronomie, 327(11), 1171-1177. Lien externe

Fortin, V., Gujrathi, S. C., Gagnon, G., Gauvin, R., Currie, J. F., Ouellet, L., & Tremblay, Y. (1999). Effect of in Situ Plasma Oxidation of Tin Diffusion Barrier for Alsicu/Tin/Ti Metallization Structure of Integrated Circuits. Journal of vacuum science & technology. B. Microelectronics and nanometer structures processing, measurement and phenomena, 17(2), 423-431. Lien externe

1998

Hammami, A., Gauvin, R., Trochu, F., Touret, O., & Ferland, P. (août 1995). Analysis of the Edge Effect on Flow Patterns in Liquid Composites Molding [Communication écrite]. 10th International Conference on Composite Materials, Vancouver, BC. Publié dans Applied Composite Materials, 5(3). Lien externe

Robitaille, F., & Gauvin, R. (juin 1998). Compaction and relaxation of dry and saturated textile reinforcements - Theory and experimental results [Communication écrite]. Science, technologies and applications : ECCM - 8 : 8th European Conference on Composite Materials, Naples, Italy. Non disponible

Gauvin, R., & Robitaille, F. (1998). Compaction of textile reinforcements for composites manufacturing. I. Review of experimental results. Polymer Composites, 19(2), 198-216. Lien externe

Robitaille, F., & Gauvin, R. (1998). Compaction of textile reinforcements for composites manufacturing. II: Compaction and relaxation of dry and H//2O-saturated woven reinforcements. Polymer Composites, 19(5), 543-557. Lien externe

Piedboeuf, M. C., Gauvin, R., & Thomas, M. (1998). Damping Behaviour of Shape Memory Alloys: Strain Amplitude, Frequency and Temperature Effects. Journal of Sound and Vibration, 214(5), 885-901. Lien externe

Diallo, M. L., Gauvin, R., & Trochu, F. (1998). Experimental Analysis and Simulation of Flow Through Multi- Layer Fiber Reinforcements in Liquid Composite Molding. Polymer Composites, 19(3), 246-256. Lien externe

Wirth, S., Gauvin, R., & Kendall, K. (1998). Experimental analysis of core crushing and core movement in resin transfer moulding(rtm) and structural reaction injection moulding(srim) foam cored composite parts. Journal of Reinforced Plastics and Composites, 17(11), 964-988. Lien externe

Wirth, S., & Gauvin, R. (1998). Experimental Analysis of Mold Filling in Compression Resin Transfer Molding. Journal of Reinforced Plastics and Composites, 17(16), 1414-1430. Lien externe

Gauvin, R., & Trochu, F. (1998). Key Issues in Numerical Simulation for Liquid Composite Molding Processes. Polymer Composites, 19(3), 233-240. Lien externe

Hammami, A., Gauvin, R., & Trochu, F. (1998). Modeling the Edge Effect in Liquid Composites Molding. Composites Part A: Applied Science and Manufacturing, 29(5-6), 603-609. Lien externe

Pham, X.-T., Trochu, F., Remade, J.-F., & Gauvin, R. Simulation of compression resin transfer molding [Communication écrite]. 6th International Conference on Computer Methods in Composite Materials (CADCOMP 1998), Montréal, Québec. Non disponible

Trochu, F., Pham, X.-T., & Gauvin, R. (1998). Simulation of compression resin transfer molding with displacement control. Journal of Reinforced Plastics and Composites, 17(17), 1525-1556. Lien externe

Averous, L., & Gauvin, R. (1998). Surface Analysis of Phenolic Composites Obtained by Rtm Process. Journal of Reinforced Plastics and Composites, 17(13), 1167-1184. Lien externe

1997

Amazouz, M., & Gauvin, R. (1997). Caractérisation thermique simple de composites pultrudés de petite transversale. [Thermal conductivities of pultruded Composites with small transverse cross section]. Canadian Society for Mechanical Engineering, Transactions, 21(1), 43-51. Lien externe

Robitaille, F., & Gauvin, R. (1997). Compaction of fiber reinforcements for composite manufacturing : results-cycles on dry reinforcements. (Rapport technique n° EPM-RT-97-10). Accès restreint

Ouddane, M., Boukhili, R., & Gauvin, R. (mai 1997). Effect of filler content on the lap shear strength of epoxy based adhesives [Communication écrite]. 42nd International SAMPE Symposium and Exhibition, Anaheim, CA, USA. Non disponible

Robitaille, F., & Gauvin, R. (avril 1997). Effect of the fluid on the compaction properties of fiber reinforcements in composites processing [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Non disponible

Yousefi, A., Lafleur, P., & Gauvin, R. (1997). The effects of cobalt promoter and glass fibers on the curing behavior of unsaturated polyester resin. Journal of vinyl and additive technology, 3(2), 157-169. Lien externe

Trochu, F., Ferland, P., & Gauvin, R. (1997). Functional requirements of a simulation software for liquid molding processes. Science and Engineering of Composite Materials, 6(4), 209-218. Disponible

Diallo, M. L., Gauvin, R., & Trochu, F. (juillet 1997). Key factors affecting the permeability measurement in continuous fiber reinforcements [Communication écrite]. 11th International Conference on Composite Materials, Gold Coast, Australia. Lien externe

Yousefi, A., Lafleur, P., & Gauvin, R. (1997). Kinetic studies of thermoset cure reactions: a review. Polymer Composites, 18(2), 157-168. Lien externe

Drouin, D., Beauvais, J., Lemire, R., Lavallée, E., Gauvin, R., & Caron, M. (1997). Method for fabricating submicron silicide structures on silicon using a resistless electron beam lithography process. Applied Physics Letters, 70(22), 3020-3022. Lien externe

Yousefi, A., Lafleur, P., & Gauvin, R. (1997). Numerical analysis of promoted polyester and vinylester reinforced composites in rtm molds. Polymer Engineering and Science, 37(5), 757-771. Lien externe

Amazouz, M., & Gauvin, R. (1997). Solving heat dissipation problems in unidirectional composite structure. Journal of Reinforced Plastics and Composites, 16(8), 686-697. Lien externe

1996

Echaabi, J., Trochu, F., & Gauvin, R. (1996). Review of failure criteria of fibrous composite materials. Polymer Composites, 17(6), 786-798. Lien externe

Robitaille, F., & Gauvin, R. (1996). Compaction of fiber reinforcements for composite manufacturing : a review of analytical results. (Rapport technique n° EPM-RT-96-19). Accès restreint

Robitaille, F., Gauvin, R., & Clerk, P. (1996). Compaction of fiber reinforcements for composite manufacturing : a review of experimental results. (Rapport technique n° EPM-RT-96-04). Accès restreint

Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (1996). Directional permeability measurement of deformed reinforcement. Journal of Reinforced Plastics and Composites, 15(6), 552-562. Lien externe

Avérous, L., & Gauvin, R. (1996). Etude de l'état de surface de pièces produites selon un procédé RTM-phénolique. (Rapport technique n° EPM-RT-96-20). Accès restreint

Gauvin, R., Lebrun, G., & Trochu, F. (octobre 1996). Étude de la température de la résine durant le remplissage d'un moule chauffé pour les procèdés d'injection sur renforts [Communication écrite]. 10es Journées nationales sur les composites, Paris, FRA. Non disponible

Lebrun, G., Gauvin, R., & Kendall, K. N. (1996). Experimental investigation of resin temperature and pressure filling and curing in a flat steel RTM mould. Composites Part A: Applied Science and Manufacturing, 27(5), 347-356. Lien externe

Lebrun, G., Gauvin, R., & Kendall, K. N. (1996). Experimental investigation of resin temperature during filling and curing in epoxy and nickel shell resin transfer moulding (rtm) moulds. Journal of Materials Processing and Manufacturing Science, 5(1), 27-44. Non disponible

Piedboeuf, M. C., Gauvin, R., & Trochu, F. (juin 1996). Hysteretic behavior of NiTi shape memory alloy as a function of deformation, temperature, and rate of deformation [Communication écrite]. 3rd International Conference on Intelligent Materials and 3rd European Conference on Smart Structures and Materials, Lyon, Fr. Lien externe

Caron, M., Gagnon, G., Gauvin, R., Hovington, P., Drouin, D., Currie, J. F., Tremblay, Y., Ouellet, L., Bigerger, M., & Wong, F. (juin 1996). An iterative procedure based on Monte Carlo simulation to determine the thickness and composition of VLSI metallization [Communication écrite]. 13th International VLSI Multilevel Interconnection (V-MIC) Conference, Santa Clara, CA, USA. Non disponible

Gauvin, R., & Trochu, F. (juin 1996). Key issues in numerical simulation of liquid composites molding processes [Communication écrite]. 29th ISATA Conference, Florence, Italy. Non disponible

Robitaille, F., & Gauvin, R. (1996). Measurement of the compaction and relaxation properties of wet/dry textile reinforcements under hydrostatic pressure : design of the apparatus and data acquisition. (Rapport technique n° EPM-RT-96-21). Accès restreint

Gauvin, R., Trochu, F., Lemenn, Y., & Diallo, L. (1996). Permeability measurement and flow simulation through fiber reinforcement. Polymer Composites, 17(1), 34-42. Lien externe

Hammami, A., Trochu, F., Gauvin, R., & Bakalemian, P. Y. Predictive models for the edge effect in liquid composite molding [Communication écrite]. 1st International Conference on Composite Science and Technology (ICCST 1996), Durban, South Africa. Non disponible

1995

Gauvin, R., Pomerleau, É., Trochu, F., & Lours, T. (mai 1995). Damping and impact properties of shape memory alloy reinforced composites [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). Development of strength failure criteria for fibrous composite laminates [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible

Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (mai 1995). Directional permeability measurement of deformed reinforcement [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Atarsia, A., Boukhili, R., & Gauvin, R. (janvier 1995). Effect of fillers on the shear and flexural properties of unidirectional fiber pultruded composites [Communication écrite]. EURO-FILLERS 1995, Mulhouse, France. Non disponible

Yousefi, A., Lafleur, P., & Gauvin, R. (mai 1995). Effects of cobalt promoter and glass fiber on the curing behavior of unsaturated polyester resin [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible

Diallo, M. L., Gauvin, R., & Trochu, F. (septembre 1995). Experimental analysis of flow through multi-layer fiber reinforcements in liquid composite molding [Communication écrite]. 4th International Conference on Automated Composites (ICAC 1995), Nottingham. Non disponible

Echaabi, J., Trochu, F., & Gauvin, R. (1995). A general strength theory for composite materials based on dual kriging interpolation. Journal of Reinforced Plastics and Composites, 14(3), 211-232. Lien externe

Lebrun, G., & Gauvin, R. (1995). Heat transfer analysis in a heated mold during the impregnation phase of the resin transfer molding process. Journal of Materials Processing and Manufacturing Science, 4(2), 81-104. Non disponible

Gao, D. M., Trochu, F., & Gauvin, R. (1995). Heat transfer analysis of non-isothermal resin transfer molding by the finite element method. Materials and Manufacturing Processes, 10(1), 57-64. Lien externe

Lebrun, G., Rudd, C. D., & Gauvin, R. (1995). Laminate temperature distributions and filling time prediction during non-isothermal impregnation of fibre preforms. Journal of Reinforced Plastics and Composites, 14(10), 1069-1080. Lien externe

Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). A methodology to derive failure criteria for composite laminates [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Boime, B., Guittard, D., Ferland, P., Trochu, F., & Gauvin, R. (mai 1995). Mold filling simulation of the resin transfer molding process for complex three-dimensional ribbed parts [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible

Ferland, P., Trochu, F., Gauvin, R., Guittard, D., & Boime, B. (mai 1995). Rate of conversion, temperature variation and flow simulation of reactive liquid during rtm and srim mold filling [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Amazouz, M., & Gauvin, R. (août 1995). Thermal conductivity of unidirectional composites with small cross-sections [Communication écrite]. 10th international conference on composite materials, Vancouver, BC, CAN. Lien externe

Trochu, F., Boudreault, J.-F., Gao, D. M., & Gauvin, R. (1995). Three-dimensional flow simulations for the resin transfer molding process. Materials and Manufacturing Processes, 10(1), 21-26. Lien externe

1994

Boukhili, R., Bojji, C., & Gauvin, R. (1994). Fatigue mechanisms under low energy repeated impact of composite laminates. Journal of Reinforced Plastics and Composites, 13(10), 856-870. Lien externe

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Finite element simulation of impact tests of laminated composite plates. Composite Structures, 28(1), 47-59. Lien externe

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response analysis of laminated composite plates using the finite element method: a parametric study. Journal of the Institution of engineers, 75, 87-91. Non disponible

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response of laminated composite plates: prediction and verification. Composite Structures, 28(1), 61-72. Lien externe

Vovor, T., Robitaille, F., & Gauvin, R. Optimum consolidation of prepreg thermoplastic composites using statistical experiment-planning methods [Communication écrite]. Moving forward with 50 years of leadership in advanced materials : 39th International SAMPE Symposium and Exhibition. Non disponible

Trochu, F., Gauvin, R., Gao, D. M., & Boudreault, J.-F. (1994). RTMFLOT - an integrated software environment for the computer simulation of the resin transfer molding process. Journal of Reinforced Plastics and Composites, 13(3), 262-270. Lien externe

Gauvin, R., Kerachni, A., & Fisa, B. (1994). Variation of mat surface density and its effect on permeability evaluation for RTM modelling. Journal of Reinforced Plastics and Composites, 13(4), 371-383. Lien externe

1992

Bojji, C., Boukhili, R., & Gauvin, R. (1992). Endommagement par chocs répétés de composites unidirectionnels. (Rapport technique n° EPM-RT-92-24). Accès restreint

Kerachni, A., & Gauvin, R. (1992). Étude expérimentale de la compressibilité des mats pour le moulage par transfert de résine. (Rapport technique n° EPM-RT-92-25). Accès restreint

Kerachni, A., & Gauvin, R. (1992). Étude expérimentale de la perméabilité planaire des mats pour le moulage par transfert de résine. (Rapport technique n° EPM-RT-92-26). Accès restreint

Trochu, F., & Gauvin, R. (1992). Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process. Journal of Reinforced Plastics and Composites, 11(7), 772-786. Lien externe

1991

Shipeng, L., & Gauvin, R. (1991). Numerical Analysis of the Resin Flow in Resin Transfer Molding. Journal of Reinforced Plastics and Composites, 10(3), 314-327. Lien externe

Trochu, F., & Gauvin, R. (1991). Simulation du remplissage de moules 2D par différences finies curvilignes. (Rapport technique n° EPM-RT-91-08). Accès restreint

1981

Girard, P., & Gauvin, R. (1981). L'amiante dans les plastiques : étude préliminaire. (Rapport technique n° EP-R-81-17). Accès restreint

Girard, P., & Gauvin, R. (1981). Température maximale à la surface des dents des engrenages en thermoplastique. (Rapport technique n° EP-R-81-25). Accès restreint

1980

Vinet, R., Connolly, R., & Gauvin, R. (1980). Étude unidirectionnelle de la distribution de température dans un échantillon viscoélastique en fatigue de flexion. (Rapport technique n° EP-R-80-32). Disponible

1976

Gauvin, R., & Hooshmand, K. (1976). Analysis of the load cycle and the contact ratio for plastics gears in a plastic-steel gear system. (Rapport technique n° EP-R-76-23). Accès restreint

Gauvin, R., & Girard, P. (1976). Etude préliminaire théorique et pratique de la répartition des températures dans un échantillon de plastique lors d'un essai en fatigue. (Rapport technique n° EP-R-76-24). Accès restreint

Gauvin, R., & Girard, P. (1976). Mise au point d'une technique pour mesurer la température des dents d'engrenages en fonctionnement. (Rapport technique n° EP-R-76-22). Accès restreint

Liste produite: Thu Mar 28 03:41:10 2024 EDT.