 | Monter d'un niveau |
Castillo-Sánchez, J.-R., Salloum-Abou-Jaoude, G., Gheribi, A. E., Lafaye, P., Oishi, K., Masse, J.-P., Bousser, É., L'Espérance, G., & Harvey, J.-P. (2024). Synthesis and characterization of (Al,Si)₃(Zr,Ti)-D0₂₂/D0₂₃ intermetallics: Understanding the stability of silicon substitution. Acta Materialia, 262, 119455 (18 pages). Disponible
Knabl, F., Kostoglou, N., Terziyska, V., Hinder, S., Baker, M., Bousser, É., Rebholz, C., & Mitterer, C. (2024). Short-Time Magnetron Sputtering for the Development of Carbon–Palladium Nanocomposites. Nanomaterials, 14(2), 164 (10 pages). Lien externe
Bousser, É., Rogov, A., Shashkov, P., Gholinia, A., Laugel, N., Slater, T. J. A., Withers, P. J., Matthews, A., & Yerokhin, A. (2023). Phase transitions in alumina films during post-sparking anodising of Al alloys. ACTA Materialia, 244, 118587 (14 pages). Lien externe
Qian, J., Baloukas, B., Bousser, É., Kosik Williams, C. A., Price, J. J., Paulson, C. A., Hart, S. D., Koch, K. W., Bellman, R. A., Sapieha, J.-E., & Martinu, L. (juin 2022). ZrO₂ optical coatings with high toughness deposited by magnetron sputtering [Communication écrite]. Optical Interference Coatings (OIC 2022), Vancouver, BC, Canada. Lien externe
Gao, Z., Zhang, X., Kulczyk-Malecka, J., Chen, Y., Bousser, É., Kelly, P., & Xiao, P. (2021). Ceramic buckling for determining the residual stress in thin films. Scripta Materialia, 201, 6 pages. Lien externe
Herrera-Jimenez, E. J., Bousser, É., Schmitt, T., Sapieha, J.-E., & Martinu, L. (2021). Effect of plasma interface treatment on the microstructure, residual stress profile, and mechanical properties of PVD TiN coatings on Ti-6Al-4V substrates. Surface and Coatings Technology, 413, 13 pages. Lien externe
Herrera-Jimenez, E. J., Vanderesse, N., Bousser, É., Schmitt, T., Bocher, P., Martinu, L., & Sapieha, J.-E. (2021). Fracture mechanism of TiN coatings on Ti-6Al-4V substrates: Role of interfaces and of the residual stress depth profile. Surface and Coatings Technology, 426, 12 pages. Lien externe
Fernández-Caballero, A., Bousser, É., Shubeita, S. M., Wady, P. T., Gu, Y., Krishna, R., Gorley, M. J., Nguyen-Manh, D., Mummery, P. M., & Pickering, E. J. (2021). High-dose ion irradiation damage in Fe₂₈Ni₂₈Mn₂₆Cr₁₈ characterised by TEM and depth-sensing nanoindentation. Nuclear Materials and Energy, 28, 11 pages. Lien externe
Vitu, T., Huminiuc, T., Doll, G., Bousser, É., Matthews, A., & Polcar, T. (2021). Tribological properties of Mo-S-C coating deposited by pulsed d.c. magnetron sputtering. Wear, 480-481, 10 pages. Lien externe
Subacius, A., Baloukas, B., Bousser, É., Hinder, S. J., Baker, M. A., Rebholz, C., & Matthews, A. (2020). Nanostructural characterisation and optical properties of sputter-deposited thick indium tin oxide (ITO) coatings. Coatings, 10(11), 1127 (7 pages). Disponible
Gholinia, A., Curd, M. E., Bousser, É., Taylor, K., Hosman, T., Coyle, S., Shearer, M. H., Hunt, J., & Withers, P. J. (2020). Coupled Broad Ion Beam-Scanning Electron Microscopy (BIB-SEM) for polishing and three dimensional (3D) serial section tomography (SST). Ultramicroscopy, 214, UNSP 11298 (13 pages). Lien externe
Wu, Y., Schmitt, T., Bousser, É., Khelfaoui, F., Najarian, V., Sapieha, J.-E., & Brochu, M. (2020). Effects of interfacial microstructure on mechanical properties of Stellite-hardfaced coating during long-term aging. Surface and Coatings Technology, 398, 11 pages. Lien externe
Lengaigne, J., Bousser, É., Brown, S., Xing, P., Turcot, F., Dolatabadi, A., Martinu, L., & Sapieha, J.-E. (2020). In situ ice growth kinetics on water-repellent coatings under atmospheric icing conditions. Surface and Coatings Technology, 399, 12 pages. Lien externe
Wu, Y., Schmitt, T., Bousser, É., Vernhes, L., Khelfaoui, F., Perez, G., Sapieha, J.-E., & Brochu, M. (2020). Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers. Surface and Coatings Technology, 390, 11 pages. Lien externe
Liang, H., Panepinto, A., Prince, L., Olivier, M., Cossement, D., Bousser, É., Geng, X., Li, W., Chen, M., Snyders, R., & Thiry, D. (2020). Study of the synthesis of C:H coating by PECVD for protecting Mg-based nano-objects. Plasma Processes and Polymers, 17(11), 9 pages. Lien externe
Lengaigne, J., Bousser, É., Brown, S., Batory, D., Dolatabadi, A., Martinu, L., & Sapieha, J.-E. (2019). Impact dynamics of supercooled microdroplets on water-repellent coatings. Thin Solid Films, 688, 6 pages. Lien externe
Smith, A. D., Donoghue, J., Garner, A., Winiarski, B., Bousser, É., Carr, J., Behnsen, J., Burnett, T. L., Wheeler, R., Wilford, K., Withers, P. J., & Preuss, M. (2019). On the Application of Xe+ Plasma FIB for Micro-fabrication of Small-scale Tensile Specimens. Experimental Mechanics, 59(8), 1113-1125. Lien externe
Wu, Y., Bousser, É., Schmitt, T., Tarfa, N., Khelfaoui, F., Rene, R., Sapieha, J.-E., & Brochu, M. (2019). Thermal stability of a Stellite/steel hardfacing interface during long-term aging. Materials Characterization, 154, 181-192. Lien externe
Lowe, T., Avcu, E., Bousser, É., Sellers, W., & Withers, P. J. (2018). 3D Imaging of Indentation Damage in Bone. Materials, 11(12), 2533 (13 pages). Disponible
Poirié, T., Schmitt, T., Bousser, É., Vernhes, R., Martinu, L., & Sapieha, J.-E. (2017). Hybrid organic/inorganic nanolaminate structures with enhanced tribo-mechanical properties for optical applications. Surface and Coatings Technology, 315, 399-407. Lien externe
Poirié, T., Schmitt, T., Bousser, É., Martinu, L., & Sapieha, J.-E. (2017). Influence of internal stress in optical thin films on their failure modes assessed by in situ real-time scratch analysis. Tribology International, 109, 355-366. Lien externe
Vernhes, L., Azzi, M., Bousser, É., Sapieha, J.-E., Schmitt, T., & Lamarre, J. M. (2016). Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC coating systems. Journal of Thermal Spray Technology, 25(1-2), 346-356. Lien externe
Taillon, G., Pougoum, F., Lavigne, S., Ton-That, L., Schulz, R., Bousser, É., Savoie, S., Martinu, L., & Sapieha, J.-E. (2016). Cavitation erosion mechanisms in stainless steels and in composite metalceramic HVOF coatings. Wear, 364-365, 201-210. Lien externe
Kohout, J., Bousser, É., Schmitt, T., Vernhes, R., Zabeida, O., Sapieha, J.-E., & Martinu, L. (2016). Stable reactive deposition of amorphous Al₂O₃ films with low residual stress and enhanced toughness using pulsed dc magnetron sputtering with very low duty cycle. Vacuum, 124, 96-100. Lien externe
Thiry, D., De Vreese, A., Renaux, F., Colaux, J. L., Lucas, S., Guinet, Y., Paccou, L., Bousser, É., & Snyders, R. (2016). Toward a better understanding of the influence of the hydrocarbon precursor on the mechanical properties of a-C:H coatings synthesized by a hybrid PECVD/PVD method. Plasma Processes and Polymers, 13(3), 316-323. Lien externe
Vernhes, L., Azzi, M., Bousser, É., & Sapieha, J.-E. (mai 2015). Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC coating systems [Communication écrite]. International Thermal Spray Conference and Exposition (ITSC 2015), Long Beach, CA, United states. Lien externe
Azzi, M., Vernhes, L., Bousser, É., & Sapieha, J.-E. (novembre 2014). Tribo-mechanical properties of CoCr and NiWCrB hardfacing superalloy coating systems [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, QC, Canada (10 pages). Lien externe
Riel, L.-P., Dion, S., Brouillette, M., Brub, S., Despatis, M.-A., & Bousser, É. (novembre 2014). Characterization of calcified plaques retrieved from occluded arteries and comparison with potential artificial analogues [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE 2014), Montréal, Québec (11 pages). Lien externe
Bousser, É. (2013). Solid Particle Erosion Mechanisms of Protective Coatings for Aerospace Applications [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bousser, É., Martinu, L., & Sapieha, J.-E. (2013). Solid particle erosion mechanisms of hard protective coatings. Surface and Coatings Technology, 235, 383-393. Lien externe
Ligot, S., Godfroid, T., Music, D., Bousser, É., Schneider, J. M., & Snyders, R. (2012). Tantalum-Doped Hydroxyapatite Thin Films: Synthesis and Characterization. ACTA Materialia, 60(8), 3435-3443. Lien externe
Li, D., Guruvenket, S., Hassani, S., Bousser, É., Azzi, M., Szpunar, J. A., & Sapieha, J.-E. (2011). Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 410. Thin Solid Films, 519(10), 3128-3134. Lien externe
Snyders, R., Bousser, É., Music, D., Jensen, J., Hocquet, S., & Schneider, J. M. (2008). Influence of the Chemical Composition on the Phase Constitution and the Elastic Properties of Rf-Sputtered Hydroxyapatite Coatings. Plasma Processes and Polymers, 5(2), 168-174. Lien externe
Snyders, R., Bousser, É., Amireault, P., Sapieha, J.-E., Park, E., Taylor, K., Casey, K., & Martinu, L. (2007). Tribo-Mechanical Properties of DLC Coatings Deposited on Nitrided Biomedical Stainless Steel. Plasma Processes and Polymers, 4(S1), S640-S646. Lien externe
