 | Monter d'un niveau |
Abd Aziz, M. H., Othman, M. H. D., Tavares, J. R., Pauzan, M. A. B., Tenjimbayashi, M., Lun, A. W., Alias, N. H., Ismail, A. F., Rahman, M. A., & Jaafar, J. (2022). Self-cleaning and anti-fouling superhydrophobic hierarchical ceramic surface synthesized from hydrothermal and fluorination methods. Applied Surface Science, 598, 12 pages. Lien externe
Absi, C., Alsinani, N., & Laberge Lebel, L. (2022). Carbon fiber reinforced poly(ether ether ketone) rivets for fastening composite structures. Composite Structures, 280, 114877 (13 pages). Lien externe
Adrar, S., & Ajji, A. (2022). Effect of different type of organomontmorillonites on oxygen permeability of PLA-based nanocomposites blown films. Polymer Engineering & Science, 62(11), 3796-3808. Lien externe
Alley, S., Jackson, E., Olivié, D., van der Heide, U. A., Ménard, C., & Kadoury, S. (2022). Effect of magnetic resonance imaging pre-processing on the performance of model-based prostate tumor probability mapping. Physics in Medicine & Biology, 67(24), 3796-3808. Lien externe
Alsinani, N., & Laberge Lebel, L. (2022). Effect of Flax/PP pellets' morphology on the mechanical properties of injection-molded parts. Journal of Thermoplastic Composite Materials, 36(7), 3041-3065. Lien externe
Alsinani, N., & Laberge Lebel, L. (2022). Effect of high pulling speeds on the morphologies of pultrudates in a thermoplastic pultrusion process. Journal of Thermoplastic Composite Materials, 36(9), 3566-3584. Lien externe
Azizipour, N., Avazpour, R., Sawan, M., Rosenzweig, D. H., & Ajji, A. (2022). Uniformity of spheroids-on-a-chip by surface treatment of PDMS microfluidic platforms. Sensors & Diagnostics, 1(4), 750-764. Disponible
Azizipour, N., Avazpour, R., Weber, M. H., Sawan, M., Ajji, A., & Rosenzweig, D. H. (2022). Uniform Tumor Spheroids on Surface-Optimized Microfluidic Biochips for Reproducible Drug Screening and Personalized Medicine. Micromachines, 13(4), 16 pages. Lien externe
Belkhiri, A., Virgilio, N., Nassiet, V., Welemane, H., Chabert, F., & Almeida, O. (2022). Tailoring the Hydroxyl Density of Glass Surface for Anionic Ring-Opening Polymerization of Polyamide 6 to Manufacture Thermoplastic Composites. Polymers, 14(17), 3663 (20 pages). Disponible
Chakhari, J., Nasraoui, M. T., Mrad, C., & Khalfi, B. (2022). Design and Modeling of Piezoelectric Energy Harvester Under Variable Pressure in Pipe Flow. Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 47(2), 513-526. Lien externe
Chouinard, G., Pelletier, F., Larose, M., Knoch, S., Pouchet, C., Dumont, M.-J., & Tavares, J. R. (2022). Insect netting: Effect of mesh size and shape on exclusion of some fruit pests and natural enemies under laboratory and orchard conditions. Journal of Pest Science, 96(2), 857-869. Disponible
Fortin, W., Bouchet, M., Therasse, E., Maire, M., Heon, H., Ajji, A., Soulez, G., & Lerouge, S. (2022). Negative In Vivo Results Despite Promising In Vitro Data With a Coated Compliant Electrospun Polyurethane Vascular Graft. Journal of Surgical Research, 279, 491-504. Lien externe
Gazil, O., Virgilio, N., & Gauffre, F. (2022). Synthesis of ultrasmall metal nanoparticles and continuous shells at the liquid/liquid interface in Ouzo emulsions. Nanoscale, 14(37), 13514-13519. Lien externe
Ghanbari, A., Heuzey, M.-C., & Carreau, P. (2022). Polyethylene terephthalate/organoclay nanocomposites: Improvement of morphology and viscoelastic properties by using a chain-extender. Applied Clay Science, 225, 106551 (9 pages). Lien externe
Girard, M., Bertrand, F., Tavares, J. R., & Heuzey, M.-C. (2022). A technique for the ultrasonic dispersion of larger quantities of cellulose nanocrystals with in-line validation. Chemical Engineering Journal, 446(Pt. 4), 137434 (9 pages). Disponible
Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573. Lien externe
Karthikeyan, A., Girard, M., Dumont, M.-J., Chouinard, G., & Tavares, J. R. (2022). Surface Modification of Commercially Available PLA Polymer Mesh. Industrial & Engineering Chemistry Research, 61(47), 17297-17305. Lien externe
Kordjazi, Z., & Ajji, A. (2022). Oxygen scavenging systems for food packaging applications: A review. Canadian Journal of Chemical Engineering, 100(12), 3444-3449. Lien externe
Legrand, U., Castillo-Sánchez, J.-R., Boudreault, R., Meunier, J.-L., Girard Lauriault, P.-L., & Tavares, J. R. (2022). Fundamental thermodynamic properties of sorbents for atmospheric water capture. Chemical Engineering Journal, 431(part 2), 134058 (8 pages). Disponible
Legrand, U., Girard-Lauriault, P.-L., Meunier, J.-L., Boudreault, R., & Tavares, J. R. (2022). Experimental and theoretical assessment of water sorbent kinetics. Langmuir, 38(8), 2651-2659. Disponible
Lessard, F., Dubé, M., & Laberge Lebel, L. (2022). A comprehensive model of the deconsolidation behaviour of unidirectional carbon fibre reinforced thermoplastic composites. Composites Part a-Applied Science and Manufacturing, 163, 107176 (12 pages). Lien externe
Lessard, F., Dubé, M., & Laberge Lebel, L. (2022). A model of multi-die thermoplastic pultrusion. Composites Part B-Engineering, 247, 110319 (12 pages). Lien externe
Martin, R. G., Johansson, C., Tavares, J. R., & Dubé, M. (2022). Material selection methodology for an induction welding magnetic susceptor based on hysteresis losses. Advanced Engineering Materials, 24(3), 2100877 (8 pages). Disponible
Monticeli, F. M., Almeida, J. H. S., Neves, R. M., Ornaghi, H. L., & Trochu, F. (2022). The influence of fabric architecture on impregnation behavior and void formation: Artificial neural network and statistical-based analysis. Polymer Composites, 43(5), 2812-2823. Lien externe
Mousavi, Z., Heuzey, M.-C., Randall, J., & Carreau, P. (2022). Enhanced properties of polylactide/polyamide 11 blends by reactive compatibilization. Canadian Journal of Chemical Engineering, 100(9), 2475-2490. Lien externe
Oliverio, R., Patenaude, V., Liberelle, B., Virgilio, N., Banquy, X., & De Crescenzo, G. (2022). Macroporous dextran hydrogels for controlled growth factor capture and delivery using coiled-coil interactions. Acta Biomaterialia, 153, 190-203. Lien externe
Osman, M. A., Virgilio, N., Rouabhia, M., & Mighri, F. (2022). Development and Characterization of Functional Polylactic Acid/Chitosan Porous Scaffolds for Bone Tissue Engineering. Polymers, 14(23), 22 pages. Lien externe
Osman, M. A., Virgilio, N., Rouabhia, M., & Mighri, F. (2022). Polylactic acid (PLA) foaming: Design of experiments for cell size control. Materials Sciences and Applications, 13(2), 63-77. Disponible
Pille, A., Dumont, M.-J., Tavares, J. R., & Roy, R. (2022). The effect of foaming additives on acrylic acid/acrylamide hydrogels. Journal of Environmental Chemical Engineering, 10(2), 107310 (10 pages). Disponible
Safi, C., Solano, A. G., Liberelle, B., Therriault, H., Delattre, L., Abdelkhalek, M., Wang, C., Bergeron-Fortier, S., Moreau, V., De Crescenzo, G., Faucheux, N., Lauzon, M.-A., Paquette, B., & Virgilio, N. (2022). Effect of Chitosan on alginate-based macroporous hydrogels for the capture of glioblastoma cancer cells. ACS Applied Bio Materials, 5(9), 4531-4540. Lien externe
Santoni, A., Guo, M. C., Heuzey, M.-C., & Carreau, P. (2022). Surface Defects of TPO Injected Foam Parts for Automotive Applications. International Polymer Processing, 22(2), 204-212. Lien externe
Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645. Lien externe
Solis-Ceballos, A., Tavares, J. R., & Dumont, M. J. (2022). The oxidation states of heavy metals and their adsorption behavior onto biobased hydrogels. International Journal of Environmental Science and Technology, 20(6), 6945-6954. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. Lien externe
Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A., & Therriault, D. (2022). Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications. Applied Materials Today, 29, 10 pages. Lien externe
Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A., & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), 4851-4860. Disponible
Torres-Castillo, C. S., & Tavares, J. R. (2022). Covalent functionalization of boron nitride nanotubes through photo-initiated chemical vapour deposition. The Canadian Journal of Chemical Engineering, 101(3), 1410-1420. Lien externe
Torres-Castillo, C. S., & Tavares, J. R. (2022). Thermally Conductive Styrene-Butadiene Rubber/Boron Nitride Nanotubes Composites. Journal of Composites Science, 6(9), 14 pages. Lien externe
Trochu, F., Vernet, N., Sun, Y., Echaabi, J., Makradi, A., & Belouettar, S. (2022). Hybrid twin models of fiber compaction for composite manufacturing based on dual kriging. International Journal of Material Forming, 15(3), 20 pages. Lien externe
Wang, C., & Ajji, A. (2022). Development of a novel ethylene scavenger made up of pumice and potassium permanganate and its effect on preservation quality of avocados. Journal of Food Engineering, 330, 8 pages. Lien externe
Xu, Y., Ajji, A., & Heuzey, M.-C. (2022). Tunable two-step shape and dimensional changes with temperature of a PNIPAM/CNC hydrogel. Soft Matter, 18(23), 4437-4444. Lien externe
Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. Lien externe
Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Crystallinity and gas permeability of Poly (Lactic Acid)/Starch nanocrystal nanocomposite. Polymers, 14(14), 2802 (14 pages). Lien externe
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 107742 (10 pages). Lien externe
