Documents dont l'auteur est "Gauvin, Raymond"

monter Monter d'un niveau
Pour citer ou exporter
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : 2016 | 2008 | 2007 | 2006 | 2004 | 2003 | 2002 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1985 | 1981 | 1980 | 1978 | 1976
Nombre de documents: 92

2016

Gauvin, R. (2016). Investigating the Thermoformability of Uhmw-Polyethylene. Journal of Plastic Film & Sheeting, 3(4), 312-324. Lien externe

2008

Sha, G., Lee, K. E., Charbonneau, C., Demopoulos, G. P., Gauvin, R., & Savadogo, O. (juin 2008). Low-temperature fabrication of TiO₂ nanocrystalline film electrodes for dye-sensitized solar cells [Communication écrite]. 7th International Symposium on New Materials for Electrochemical Systems, Montréal, Québec. Non disponible

2007

Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (octobre 2007). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Communication écrite]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie. Non disponible

2006

Achim, V., Soukane, S., Gauvin, R., & Trochu, F. (août 2006). Optimization of liquid composite molding based on a mold coefficient concept [Communication écrite]. 6th Canada-Japan Workshop on Composites, Toronto, Canada. Non disponible

2004

Ruiz, E., Trochu, F., & Gauvin, R. (2004). Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM. Advanced Composites Letters, 13(1), 49-57. Lien externe

Ruiz, E., Gauvin, R., & Trochu, F. (septembre 2004). Processing stresses and thermal optimization in resin transfer molding [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan. Non disponible

Boukhili, R., Boukehili, H., Gauvin, R., Ben Daly, H., & Gasmi, A. Effect of Fillers and Low Profile Additives on the Bending of Pultruded Composites [Communication écrite]. High Performance Structures and Materials II. Lien externe

2003

Ruiz, E., Trochu, F., & Gauvin, R. (novembre 2003). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 5th International Symposium on Advanced Composites, Corfu, Greece. Non disponible

Bréard, J., Henzel, Y., Trochu, F., & Gauvin, R. (2003). Analysis of Dynamic Flows Through Porous Media. Part II: Deformation of a Double-Scale Fibrous Reinforcement. Polymer Composites, 24(3), 409-421. Lien externe

Bréard, J., Henzel, Y., Trochu, F., & Gauvin, R. (2003). Analysis of Dynamic Flows Through Porous Media. Part I: Comparison Between Saturated and Unsaturated Flows in Fibrous Reinforcements. Polymer Composites, 24(3), 391-408. Lien externe

2002

Soulati, K., & Gauvin, R. (mai 2002). Experimental evaluation of composite-concrete interface properties using sandwich specimen [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe

1999

Henzel, Y., Bréard, J., Faitout, P., Cayeux, D., & Gauvin, R. (1999). Dynamique des écoulements en milieux poreux double échelle. Comptes Rendus De l'Academie Des Sciences Série II Fascicule B- Mécanique Physique Astronomie, 327(11), 1171-1177. Lien externe

Gauvin, R., & Robitaille, F. (1999). Compaction of textile reinforcements for composites manufacturing. III. Reorganization of the fiber network. Polymer Composites, 20(1), 48-61. Lien externe

Fortin, V., Gujrathi, S. C., Gagnon, G., Gauvin, R., Currie, J. F., Ouellet, L., & Tremblay, Y. (1999). Effect of in Situ Plasma Oxidation of Tin Diffusion Barrier for Alsicu/Tin/Ti Metallization Structure of Integrated Circuits. Journal of vacuum science & technology. B. Microelectronics and nanometer structures processing, measurement and phenomena, 17(2), 423-431. Lien externe

1998

Wirth, S., Gauvin, R., & Kendall, K. (1998). Experimental analysis of core crushing and core movement in resin transfer moulding(rtm) and structural reaction injection moulding(srim) foam cored composite parts. Journal of Reinforced Plastics and Composites, 17(11), 964-988. Lien externe

Wirth, S., & Gauvin, R. (1998). Experimental Analysis of Mold Filling in Compression Resin Transfer Molding. Journal of Reinforced Plastics and Composites, 17(16), 1414-1430. Lien externe

Trochu, F., Pham, X.-T., & Gauvin, R. (1998). Simulation of compression resin transfer molding with displacement control. Journal of Reinforced Plastics and Composites, 17(17), 1525-1556. Lien externe

Robitaille, F., & Gauvin, R. (juin 1998). Compaction and relaxation of dry and saturated textile reinforcements - Theory and experimental results [Communication écrite]. Science, technologies and applications : ECCM - 8 : 8th European Conference on Composite Materials, Naples, Italy. Non disponible

Robitaille, F., & Gauvin, R. (1998). Compaction of textile reinforcements for composites manufacturing. II: Compaction and relaxation of dry and H//2O-saturated woven reinforcements. Polymer Composites, 19(5), 543-557. Lien externe

Piedboeuf, M. C., Gauvin, R., & Thomas, M. (1998). Damping Behaviour of Shape Memory Alloys: Strain Amplitude, Frequency and Temperature Effects. Journal of Sound and Vibration, 214(5), 885-901. Lien externe

Pham, X.-T., Trochu, F., Remacle, J.-F., & Gauvin, R. (août 1998). Simulation of compression resin transfer molding [Communication écrite]. 6th International Conference on Computer Methods in Composite Materials (CADCOMP 1998), Montréal, Québec. Lien externe

Hammami, A., Gauvin, R., Trochu, F., Touret, O., & Ferland, P. (août 1995). Analysis of the Edge Effect on Flow Patterns in Liquid Composites Molding [Communication écrite]. 10th International Conference on Composite Materials, Vancouver, BC. Publié dans Applied Composite Materials, 5(3). Lien externe

Hammami, A., Gauvin, R., & Trochu, F. (1998). Modeling the Edge Effect in Liquid Composites Molding. Composites Part A: Applied Science and Manufacturing, 29(5-6), 603-609. Lien externe

Gauvin, R., & Trochu, F. (1998). Key Issues in Numerical Simulation for Liquid Composite Molding Processes. Polymer Composites, 19(3), 233-240. Lien externe

Gauvin, R., & Robitaille, F. (1998). Compaction of textile reinforcements for composites manufacturing. I. Review of experimental results. Polymer Composites, 19(2), 198-216. Lien externe

Diallo, M. L., Gauvin, R., & Trochu, F. (1998). Experimental Analysis and Simulation of Flow Through Multi- Layer Fiber Reinforcements in Liquid Composite Molding. Polymer Composites, 19(3), 246-256. Lien externe

Avérous, L., & Gauvin, R. (1998). Surface Analysis of Phenolic Composites Obtained by Rtm Process. Journal of Reinforced Plastics and Composites, 17(13), 1167-1184. Lien externe

1997

Robitaille, F., & Gauvin, R. (1997). Compaction of fiber reinforcements for composite manufacturing : results-cycles on dry reinforcements. (Rapport technique n° EPM-RT-97-10). Accès restreint

Yousefi, A., Lafleur, P., & Gauvin, R. (1997). Kinetic studies of thermoset cure reactions: a review. Polymer Composites, 18(2), 157-168. Lien externe

Yousefi, A., Lafleur, P., & Gauvin, R. (1997). Numerical analysis of promoted polyester and vinylester reinforced composites in rtm molds. Polymer Engineering and Science, 37(5), 757-771. Lien externe

Yousefi, A., Lafleur, P., & Gauvin, R. (1997). The effects of cobalt promoter and glass fibers on the curing behavior of unsaturated polyester resin. Journal of vinyl and additive technology, 3(2), 157-169. Lien externe

Trochu, F., Ferland, P., & Gauvin, R. (1997). Functional requirements of a simulation software for liquid molding processes. Science and Engineering of Composite Materials, 6(4), 209-218. Disponible

Robitaille, F., & Gauvin, R. (avril 1997). Effect of the fluid on the compaction properties of fiber reinforcements in composites processing [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Non disponible

Ouddane, M., Boukhili, R., & Gauvin, R. (mai 1997). Effect of filler content on the lap shear strength of epoxy based adhesives [Communication écrite]. 42nd International SAMPE Symposium and Exhibition, Anaheim, CA, USA. Non disponible

Drouin, D., Beauvais, J., Lemire, R., Lavallée, E., Gauvin, R., & Caron, M. (1997). Method for fabricating submicron silicide structures on silicon using a resistless electron beam lithography process. Applied Physics Letters, 70(22), 3020-3022. Lien externe

Diallo, M. L., Gauvin, R., & Trochu, F. (juillet 1997). Key factors affecting the permeability measurement in continuous fiber reinforcements [Communication écrite]. 11th International Conference on Composite Materials, Gold Coast, Australia. Lien externe

Amazouz, M., & Gauvin, R. (1997). Caractérisation thermique simple de composites pultrudés de petite transversale. [Thermal conductivities of pultruded Composites with small transverse cross section]. Canadian Society for Mechanical Engineering, Transactions, 21(1), 43-51. Lien externe

Amazouz, M., & Gauvin, R. (1997). Solving heat dissipation problems in unidirectional composite structure. Journal of Reinforced Plastics and Composites, 16(8), 686-697. Lien externe

1996

Echaabi, J., Trochu, F., & Gauvin, R. (1996). Review of failure criteria of fibrous composite materials. Polymer Composites, 17(6), 786-798. Lien externe

Robitaille, F., Gauvin, R., & Clerk, P. (1996). Compaction of fiber reinforcements for composite manufacturing : a review of experimental results. (Rapport technique n° EPM-RT-96-04). Accès restreint

Robitaille, F., & Gauvin, R. (1996). Compaction of fiber reinforcements for composite manufacturing : a review of analytical results. (Rapport technique n° EPM-RT-96-19). Accès restreint

Robitaille, F., & Gauvin, R. (1996). Measurement of the compaction and relaxation properties of wet/dry textile reinforcements under hydrostatic pressure : design of the apparatus and data acquisition. (Rapport technique n° EPM-RT-96-21). Accès restreint

Avérous, L., & Gauvin, R. (1996). Etude de l'état de surface de pièces produites selon un procédé RTM-phénolique. (Rapport technique n° EPM-RT-96-20). Accès restreint

Piedboeuf, M. C., Gauvin, R., & Trochu, F. (juin 1996). Hysteretic behavior of NiTi shape memory alloy as a function of deformation, temperature, and rate of deformation [Communication écrite]. 3rd International Conference on Intelligent Materials and 3rd European Conference on Smart Structures and Materials, Lyon, Fr. Lien externe

Lebrun, G., Gauvin, R., & Kendall, K. N. (1996). Experimental investigation of resin temperature during filling and curing in epoxy and nickel shell resin transfer moulding (rtm) moulds. Journal of Materials Processing and Manufacturing Science, 5(1), 27-44. Non disponible

Lebrun, G., Gauvin, R., & Kendall, K. N. (1996). Experimental investigation of resin temperature and pressure filling and curing in a flat steel RTM mould. Composites Part A: Applied Science and Manufacturing, 27(5), 347-356. Lien externe

Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (1996). Directional permeability measurement of deformed reinforcement. Journal of Reinforced Plastics and Composites, 15(6), 552-562. Lien externe

Hammami, A., Trochu, F., Gauvin, R., & Bakalemian, P. Y. Predictive models for the edge effect in liquid composite molding [Communication écrite]. 1st International Conference on Composite Science and Technology (ICCST 1996), Durban, South Africa. Non disponible

Gauvin, R., Trochu, F., Lemenn, Y., & Diallo, L. (1996). Permeability measurement and flow simulation through fiber reinforcement. Polymer Composites, 17(1), 34-42. Lien externe

Gauvin, R., & Trochu, F. (juin 1996). Key issues in numerical simulation of liquid composites molding processes [Communication écrite]. 29th ISATA Conference, Florence, Italy. Non disponible

Gauvin, R., Lebrun, G., & Trochu, F. (octobre 1996). Étude de la température de la résine durant le remplissage d'un moule chauffé pour les procédés d'injection sur renforts [Communication écrite]. 10es Journées nationales sur les composites, Paris, France. Non disponible

Caron, M., Gagnon, G., Gauvin, R., Hovington, P., Drouin, D., Currie, J. F., Tremblay, Y., Ouellet, L., Bigerger, M., & Wong, F. (juin 1996). An iterative procedure based on Monte Carlo simulation to determine the thickness and composition of VLSI metallization [Communication écrite]. 13th International VLSI Multilevel Interconnection (V-MIC) Conference, Santa Clara, CA, USA. Non disponible

1995

Yousefi, A., Lafleur, P., & Gauvin, R. (mai 1995). Effects of cobalt promoter and glass fiber on the curing behavior of unsaturated polyester resin [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible

Trochu, F., Boudreault, J.-F., Gao, D. M., & Gauvin, R. (1995). Three-dimensional flow simulations for the resin transfer molding process. Materials and Manufacturing Processes, 10(1), 21-26. Lien externe

Lebrun, G., Rudd, C. D., & Gauvin, R. (1995). Laminate temperature distributions and filling time prediction during non-isothermal impregnation of fibre preforms. Journal of Reinforced Plastics and Composites, 14(10), 1069-1080. Lien externe

Lebrun, G., & Gauvin, R. (1995). Heat transfer analysis in a heated mold during the impregnation phase of the resin transfer molding process. Journal of Materials Processing and Manufacturing Science, 4(2), 81-104. Non disponible

Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (mai 1995). Directional permeability measurement of deformed reinforcement [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Gauvin, R., Pomerleau, É., Trochu, F., & Lours, T. (mai 1995). Damping and impact properties of shape memory alloy reinforced composites [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Gao, D. M., Trochu, F., & Gauvin, R. (1995). Heat transfer analysis of non-isothermal resin transfer molding by the finite element method. Materials and Manufacturing Processes, 10(1), 57-64. Lien externe

Ferland, P., Trochu, F., Gauvin, R., Guittard, D., & Boime, B. (mai 1995). Rate of conversion, temperature variation and flow simulation of reactive liquid during rtm and srim mold filling [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). Development of strength failure criteria for fibrous composite laminates [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible

Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). A methodology to derive failure criteria for composite laminates [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Echaabi, J., Trochu, F., & Gauvin, R. (1995). A general strength theory for composite materials based on dual kriging interpolation. Journal of Reinforced Plastics and Composites, 14(3), 211-232. Lien externe

Diallo, M. L., Gauvin, R., & Trochu, F. (septembre 1995). Experimental analysis of flow through multi-layer fiber reinforcements in liquid composite molding [Communication écrite]. 4th International Conference on Automated Composites (ICAC 1995), Nottingham. Non disponible

Boime, B., Guittard, D., Ferland, P., Trochu, F., & Gauvin, R. (mai 1995). Mold filling simulation of the resin transfer molding process for complex three-dimensional ribbed parts [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible

Atarsia, A., Boukhili, R., & Gauvin, R. (janvier 1995). Effect of fillers on the shear and flexural properties of unidirectional fiber pultruded composites [Communication écrite]. EURO-FILLERS 1995, Mulhouse, France. Non disponible

Amazouz, M., & Gauvin, R. (août 1995). Thermal conductivity of unidirectional composites with small cross-sections [Communication écrite]. 10th international conference on composite materials, Vancouver, BC, CAN. Lien externe

1994

Vovor, T., Robitaille, F., & Gauvin, R. Optimum consolidation of prepreg thermoplastic composites using statistical experiment-planning methods [Communication écrite]. Moving forward with 50 years of leadership in advanced materials : 39th International SAMPE Symposium and Exhibition. Non disponible

Trochu, F., Gauvin, R., Gao, D. M., & Boudreault, J.-F. (1994). RTMFLOT - an integrated software environment for the computer simulation of the resin transfer molding process. Journal of Reinforced Plastics and Composites, 13(3), 262-270. Lien externe

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response analysis of laminated composite plates using the finite element method: a parametric study. Journal of the Institution of engineers, 75, 87-91. Non disponible

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Finite element simulation of impact tests of laminated composite plates. Composite Structures, 28(1), 47-59. Lien externe

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response of laminated composite plates: prediction and verification. Composite Structures, 28(1), 61-72. Lien externe

Gauvin, R., Kerachni, A., & Fisa, B. (1994). Variation of mat surface density and its effect on permeability evaluation for RTM modelling. Journal of Reinforced Plastics and Composites, 13(4), 371-383. Lien externe

Boukhili, R., Bojji, C., & Gauvin, R. (1994). Fatigue mechanisms under low energy repeated impact of composite laminates. Journal of Reinforced Plastics and Composites, 13(10), 856-870. Lien externe

1993

Dong, S., & Gauvin, R. (1993). Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials. Polymer Composites, 14(5), 414-420. Lien externe

1992

Bojji, C., Boukhili, R., & Gauvin, R. (1992). Endommagement par chocs répétés de composites unidirectionnels. (Rapport technique n° EPM-RT-92-24). Accès restreint

Kerachni, A., & Gauvin, R. (1992). Étude expérimentale de la compressibilité des mats pour le moulage par transfert de résine. (Rapport technique n° EPM-RT-92-25). Accès restreint

Kerachni, A., & Gauvin, R. (1992). Étude expérimentale de la perméabilité planaire des mats pour le moulage par transfert de résine. (Rapport technique n° EPM-RT-92-26). Accès restreint

Trochu, F., & Gauvin, R. (1992). Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process. Journal of Reinforced Plastics and Composites, 11(7), 772-786. Lien externe

1991

Trochu, F., & Gauvin, R. (1991). Simulation du remplissage de moules 2D par différences finies curvilignes. (Rapport technique n° EPM-RT-91-08). Accès restreint

Shipeng, L., & Gauvin, R. (1991). Numerical Analysis of the Resin Flow in Resin Transfer Molding. Journal of Reinforced Plastics and Composites, 10(3), 314-327. Lien externe

1990

Sanschagrin, B., Gauvin, R., Fisa, B., & Vu-Khanh, T. (1990). Weldlines in Injection Molded Polypropylene: Effect of Filler Shape. Journal of Reinforced Plastics and Composites, 9(2), 194-208. Lien externe

1989

Boukhili, R., Gauvin, R., & Gosselin, M. (1989). The Effect of Weld-Lines on the Fatigue Resistance of Short Glass Fiber Reinforced Polycarbonate. Journal of Thermoplastic Composite Materials, 2(2), 78-90. Lien externe

1985

Koffi, D., Gauvin, R., & Yelle, H. (1985). Closure to "Discussion of 'Heat Generation in Thermoplastic Spur Gears'" (1985, ASME J. Mech. Transm. Autom. Des., 107, pp. 36–37) [Commentaire ou lettre]. Journal of Mechanisms Transmissions and Automation in Design, 107(1), 37-37. Lien externe

1981

Vinet, R., Connolly, R., & Gauvin, R. (1981). Temperature rise in a thermoplastic under completely reversed bending stresses. Polymer Engineering and Science, 21(18), 1203-1209. Lien externe

Girard, P., & Gauvin, R. (1981). L'amiante dans les plastiques : étude préliminaire. (Rapport technique n° EP-R-81-17). Accès restreint

Girard, P., & Gauvin, R. (1981). Température maximale à la surface des dents des engrenages en thermoplastique. (Rapport technique n° EP-R-81-25). Accès restreint

1980

Vinet, R., Connolly, R., & Gauvin, R. (1980). Étude unidirectionnelle de la distribution de température dans un échantillon viscoélastique en fatigue de flexion. (Rapport technique n° EP-R-80-32). Disponible

1978

Gauvin, R., & Trotignon, J. P. (1978). A New Method of Test for Flexural Fatigue of Plastics. Journal of Testing and Evaluation, 6(1), 48-51. Lien externe

1976

Gauvin, R., & Girard, P. (1976). Mise au point d'une technique pour mesurer la température des dents d'engrenages en fonctionnement. (Rapport technique n° EP-R-76-22). Accès restreint

Gauvin, R., & Hooshmand, K. (1976). Analysis of the load cycle and the contact ratio for plastics gears in a plastic-steel gear system. (Rapport technique n° EP-R-76-23). Accès restreint

Gauvin, R., & Girard, P. (1976). Etude préliminaire théorique et pratique de la répartition des températures dans un échantillon de plastique lors d'un essai en fatigue. (Rapport technique n° EP-R-76-24). Accès restreint

Liste produite: Sat Oct 10 03:26:17 2026 EDT.