Documents dont l'auteur est "Ruiz, Edu"

Monter d'un niveau

Edu RuizDépartement de génie mécanique

Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : Article de revue | Communication écrite | Présentation | Demande de brevet | Chapitre de livre

Nombre de documents: 151

Article de revue

Billotte, C., Romana, L., Flory, A., Kaliaguine, S., & Ruiz, E. (2024). Recycled carbon black/high-density polyethylene composite from waste tires: manufacturing, testing, and aging characterization. Recycling, 9(6), 107 (19 pages). Disponible

Belzile, A., Armanasco, F., Chiacchiarelli, L. M., Lebrun, G., & Ruiz, E. (2024). Development of a novel flax soy-based polyurethane prepreg composite. Composites Part A: Applied Science and Manufacturing, 181, 108136 (12 pages). Lien externe

Diby, I. C. P., Belkhiri, N., Nohair, B., Kazeruni, M., Ruiz, E., & Kaliaguine, S. (2024). HDPE crystalline lamellae in composites involving pyrolytic carbon black: Effect on elastic modulus. Polymer Composites, 28986 (16 pages). Lien externe

Billotte, C., Romana, L., Flory, A., Kaliaguine, S., & Ruiz, E. (2024). Recycled from waste tires carbon black/high-density polyethylene composite: Multi-scale mechanical properties and polymer aging. Polymer Composites, 28585 (14 pages). Lien externe

Bernaoui, A., Lebrun, G., & Ruiz, E. (2022). High performance natural fiber composites from mat and UD flax reinforcements backed with a mat Binder: A study of mat fiber surface fibrillation. Composites Part A: Applied Science and Manufacturing, 160, 107064 (14 pages). Lien externe

Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74. Lien externe

Habibi, M., Ruiz, E., Lebrun, G., & Laperrière, L. (2018). Effect of surface density and fiber length on the porosity and permeability of nonwoven flax reinforcement. Textile Research Journal, 88(15), 1776-1787. Lien externe

Scola, A., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). New liquid processing of oxide/oxide 3D wowen ceramic matrix composites. Journal of the American Ceramic Society, 102(6), 3256-3268. Lien externe

Scola, A., Podgorski, M., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). Novel device for in situ process characterization of oxide/oxide ceramic matrix composites fabricated by flexible injection. Journal of the American Ceramic Society, 102(5), 2337-2352. Lien externe

Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216. Lien externe

Courtois, A., Hirsekorn, M., Benavente, M., Jaillon, A., Marcin, L., Ruiz, E., & Lévesque, M. (2018). Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling. Journal of Composite Materials, 53(2), 155-171. Lien externe

Billotte, C., Fotsing, E. R., & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017, 1-9. Disponible

LeBel, F., Ruiz, E., & Trochu, F. (2017). Experimental study of saturation by visible light transmission in dual-scale fibrous reinforcements during composite manufacturing. Journal of Reinforced Plastics and Composites, 36(23), 1693-1711. Lien externe

Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Lien externe

Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Lien externe

Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2017). Viscoelastic distortion in asymmetric plates during post curing. Composites Part A: Applied Science and Manufacturing, 103(Supplement), 122-130. Lien externe

LeBel, F., Ruiz, E., & Trochu, F. (2017). Void content analysis and processing issues to minimize defects in liquid composite molding. Polymer Composites, 40(1), 109-120. Lien externe

Renaud, J., Vernet, N., Ruiz, E., & Laberge Lebel, L. (2016). Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature. Composites Part A: Applied Science and Manufacturing, 86, 87-96. Lien externe

Fotsing, E. R., Leclerc, C., Sola, M., Ross, A., & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239. Lien externe

Gascón, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming, 9(2), 229-239. Lien externe

Favre, A., Fotsing, E. R., Lévesque, M., & Ruiz, E. (2015). Comparative study of fiber-reinforced elastomer composites subjected to accelerated aging in water. Jounal of Elastomers and Plastics, 47(8), 719-737. Lien externe

Gascón, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2015). Numerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding. Composites Part A: Applied Science and Manufacturing, 77, 275-284. Lien externe

Fotsing, E. R., Ross, A., & Ruiz, E. (2014). Characterization of surface defects on composite sandwich materials based on deflectrometry. NDT & E International, 62, 29-39. Lien externe

Ravey, C., Ruiz, E., & Trochu, F. (2014). Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography. Composites Science and Technology, 99, 96-102. Lien externe

Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825. Lien externe

Vernet, N., Ruiz, E., Advani, S., Alms, J. B., Aubert, M., Barburski, M., Barari, B., Béraud, J.-M., Berg, D. C., Correia, N., Danzi, M., Delavière, T., Dickert, M., Di Fratta, C., Endruweit, A., Ermanni, P., Francucci, G., Garcia, J. A., George, A., ... Ziegmann, G. (2014). Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing, 61, 172-184. Lien externe

LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2014). Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements. International Journal of Material Forming, 7(1), 93-116. Lien externe

Billotte, C., Bernard, F. M., & Ruiz, E. (2013). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method. European Polymer Journal, 49(11), 3548-3560. Lien externe

LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2013). Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics. Textile Research Journal, 83(15), 1634-1659. Lien externe

Gutiérrez, J., Ruiz, E., & Trochu, F. (2013). Exploring the behavior of glass fiber reinforcements under vibration-assisted compaction. Journal of the Textile Institute, 104(9), 980-993. Lien externe

Gutierrez, J., Ruiz, E., & Trochu, F. (2013). High-frequency vibrations on the compaction of dry fibrous reinforcements. Advanced Composite Materials, 22(1), 13-27. Lien externe

Causse, P., Ruiz, E., & Trochu, F. (2013). Influence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection. International Journal of Material Forming, 6(3), 341-362. Lien externe

Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511. Lien externe

Fotsing, E. R., Miron, F., Eury, Y., Ross, A., & Ruiz, E. (2012). Bonding Analysis of Carbon/Epoxy Composites With Viscoelastic Acrylic Adhesive. Composites Part B: Engineering, 43(5), 2087-2093. Lien externe

Francucci, G., Vázquez, A.́., Ruiz, E., & Rodriguez, E. S. (2012). Capillary effects in vacuum-assisted resin transfer molding with natural fibers. Polymer Composites, 33(9), 1593-1602. Lien externe

LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2012). Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open Journal of Inorganic Non-Metallic Materials, 2(3), 25-45. Lien externe

Palardy, G., Hubert, P., Ruiz, E., Haider, M., & Lessard, L. (2012). Numerical Simulations for Class A Surface Finish in Resin Transfer Moulding Process. Composites Part B: Engineering, 43(2), 819-824. Lien externe

Causse, P., Ruiz, E., & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913. Lien externe

Arbter, R., Béraud, J.-M., Binétruy, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., Endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Vladimirovitch Lomov, S., Long, A. C., Michaud, V., Morren, G., ... Ziegmann, G. (2011). Experimental determination of the permeability of textiles: A benchmark exercise. Composites Part A Applied Science and Manufacturing, 42(9), 1157-1168. Lien externe

Bensadoun, F., Kchit, N., Billotte, C., Trochu, F., & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, 406087. Disponible

Causse, P., Ruiz, E., & Trochu, F. (2011). Experimental study of flexible injection to manufacture parts of strong curvature. Polymer Composites, 32(6), 892-895. Lien externe

Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F., & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011, 1-10. Disponible

García, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (2010). An efficient solver of the saturation equation in liquid composite molding processes. International Journal of Material Forming, 3(2), 1295-1302. Lien externe

Achim, V., & Ruiz, E. (2010). Guiding selection for reduced process development time in RTM. International Journal of Material Forming, 3(2), 1277-1286. Lien externe

Ruiz, E., & Billotte, C. (2009). Predicting the cure of thermosetting polymers : the iso-conversion map. Polymer Composites, 30(10), 1450-1457. Lien externe

Leclerc, J. S., & Ruiz, E. (2008). Porosity reduction using optimized flow velocity in resin transfer molding. Composites Part A: Applied Science and Manufacturing, 39(12), 1859-68. Lien externe

Ruiz, E., Achim, V., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: isothermal flow. Science and Engineering of Composite Materials, 14(2), 85-112. Disponible

Ruiz, E., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: non-isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144. Disponible

Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part I: Experimental Results. Polymer Composites, 28(6), 797-811. Lien externe

Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part II: Prediction Model and Numerical Simulations. Polymer Composites, 28(6), 812-827. Lien externe

Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (2006). Advanced numerical simulation of liquid composite molding for process analysis and optimization. Composites Part A: Applied Science and Manufacturing, 37(6 SPEC ISS), 890-902. Lien externe

Ruiz, E., & Trochu, F. (2006). Multi-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time. Composites Part A: Applied Science and Manufacturing, 37(6), 913-924. Lien externe

Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Bréard, J. (2006). Optimization of Injection Flow Rate to Minimize Micro/Macro-Voids Formation in Resin Transfer Molded Composites. Composites Science and Technology, 66(3-4), 475-486. Lien externe

Ruiz, E., & Trochu, F. (2005). Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses. Polymer Composites, 26(2), 209-230. Lien externe

Soukane, S., Ruiz, E., & Trochu, F. (2005). A novel approach to reduce calculation time during simulations of resin transfer molding. Revue Européenne des Éléments Finis, 14(6-7), 819-840. Lien externe

Ruiz, E., & Trochu, F. (2005). Numerical Analysis of Cure Temperature and Internal Stresses in Thin and Thick Rtm Parts. Composites Part A: Applied Science and Manufacturing, 36(6), 806-826. Lien externe

Ruiz, E., Demaria, C. F., & Trochu, F. (2005). PolyPer, a freeware package for preform permeability characterization. JEC Composites (17), 70-72. Non disponible

Ruiz, E., & Trochu, F. (2005). Thermomechanical Properties During Cure of Glass-Polyester Rtm Composites: Elastic and Viscoelastic Modeling. Journal of Composite Materials, 39(10), 881-916. Lien externe

Ruiz, E., Trochu, F., & Gauvin, R. (2004). Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM. Advanced Composites Letters, 13(1), 49-57. Lien externe

Ruiz, E., Achim, V., Soukane, S., & Trochu, F. (2004). Numerical simulation of liquid composite molding. JEC Composites (8), 147-149. Non disponible

Bechet, E., Ruiz, E., Trochu, F., & Cuillière, J.-C. (2004). Re-Meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding. Journal of Reinforced Plastics and Composites, 23(1), 17-36. Lien externe

Béchet, É., Ruiz, E., Trochu, F., & Cuilliere, J. C. (2003). Adaptive Mesh Generation for Mould Filling Problems in Resin Transfer Moulding. Composites Part A: Applied Science and Manufacturing, 34(9), 813-834. Lien externe

Ruiz, E., & Trochu, F. (2003). State of the art revue of numerical simulation of liquid composite molding processes. Recent Research Developments in Materials Science & Engineering (2), 217-244. Non disponible

Communication écrite

Nohair, B., Belkhiri, N., Diby, I. C. P., Kazeruni, M., Bussières, J.-F., Ruiz, E., & Kaliaguine, S. (octobre 2023). Mechanical performance enhancement of thermoplastics by surface-modified pyrolytic carbon black additives from waste tires [Communication écrite]. 9th Annual Composites and Advanced Materials Expo (CAMX 2023), Atlanta, GA, USA (11 pages). Lien externe

Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Lien externe

Benavente, M., Marcin, L., Lévesque, M., & Ruiz, E. (juillet 2017). Geometrical instabilities in asymmetric plates reinforced with 3D interlock fabrics [Communication écrite]. Cancom 2017, Ottawa, Ontario. Non disponible

Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (août 2017). Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Lien externe

Benavente, M., Godon, T., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composites plates reinforced with 3D interlock fabrics [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China (9 pages). Lien externe

Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C., & Lévesque, M. (juin 2016). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior [Communication écrite]. 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages). Lien externe

Renaud, J., Ruiz, E., & Laberge Lebel, L. (mai 2016). Preforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process [Communication écrite]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states. Lien externe

Courtois, A., Hirsekorn, M., Marcin, L., Vernet, N., Ruiz, E., & Lévesque, M. (mai 2016). Viscoelastic behavior of an epoxy resin during cure : characterization and modeling [Communication écrite]. 10th International Conference on Mechanics of Time-Dependent Materials, Paris, France. Non disponible

Courteau-Godmaire, H., Fotsing, E. R., Causse, P., Lévesque, M., & Ruiz, E. (juillet 2015). Numerical modeling of resin shrinkage around insert in composite sandwich panels [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark (9 pages). Lien externe

Pupin, C., Ross, A., Ruiz, E., Billotte, C., Rietsch, J.-C., Bricourt, P., & Vernet, N. (juillet 2015). Porosity control by process parameters [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark (12 pages). Lien externe

Billotte, C., Fellah, C., & Ruiz, E. (juillet 2013). Chemical shrinkage and thermomechanical characterization of different resin systems and prepregs during cure by a novel in situ measurement method [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ravey, C., Ruiz, E., & Trochu, F. (juillet 2013). Determination of the optimal injection velocity in resin transfer molding by infrared thermography [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Charette, É., Fotsing, E. R., Billotte, C., Ruiz, E., & Grenier, D. (juillet 2013). Effect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (juillet 2013). Formation of porosities in RTM by VOCS and water vapour [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet modifications [Communication écrite]. 19th International Conference on Composite Materials (ICCM-19), Montréal, Québec (12 pages). Lien externe

Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). Processing warpage of asymmetric composite panels manufactured by resin transfer molding [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Renaud, J., Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). A study of consolidation equilibrium in composites made by flexible injection [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (juillet 2013). Underwater accelerated aging of elastomeric composite materials [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ravey, C., Lebel, F., Ruiz, E., Courteau-Godmaire, H., & Trochu, F. (juillet 2013). Void minimization and optimization of injection velocity in RTM processing [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Pineda, U., Montés, N., Sánchez, F., Bensadoun, F., & Ruiz, E. (juin 2012). Experimental analysis by thermography and conductive heat flux sensors of the curing stage of composite parts made by resin infusion (RI) [Communication écrite]. 15th European Conference on Composite Materials (ECCM-15), Venise, Italie (8 pages). Lien externe

Ruiz, E., Lebel, F., & Trochu, F. (juillet 2012). Experimental study of capillary flows, voids formation and void migration in LCM Manufacturing [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Lien externe

Pineda, U., Montés, N., Sánchez, F., Bensadoun, F., & Ruiz, E. (juin 2012). In-situ calibration experimental method for infrared thermography applied to the heat transfer analysis for composite parts during manufacturing based on resin infusion technique [Communication écrite]. 11th Quantitative InfraRed Thermography (QIRT 2012), Naples, Italie (10 pages). Lien externe

Francucci, G., Vázquez, A., Rodríguez, E., & Ruiz, E. (juillet 2012). Influence of the type of fluid and injection conditions on the processing of natural fiver composites [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Lien externe

García, J. A., Gascon, L., Ruiz, E., Lebel, F., & Trochu, F. (juillet 2012). Simulation and experimental validation of the saturation in LCM processes [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Lien externe

Ruiz, E. (juillet 2012). Technology transfer in Canada: closing the gap between science and volume production [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Lien externe

Causse, P., Ruiz, E., & Trochu, F. (août 2011). Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection [Communication écrite]. 18th International Conference on Composite Materials, Jeju Island, Korea (6 pages). Lien externe

Ruiz, E., Billotte, C., Morin, B. F., Cara, F., & Baurier, H. (août 2011). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method [Communication écrite]. 18th International Conference on Composite Materials (ICCM 2011), Jeju Island, Korea. Lien externe

Bilotte, C., Morin, B. F., Cara, F., Baurier, H., & Ruiz, E. (septembre 2011). Chemical shrinkage and thermomechanical characterization of an expoxy resin during cure by a novel in situ measurement method [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible

Bensadoun, F., Billotte, C., Kchit, N., Bickerton, S., Trochu, F., & Ruiz, E. (septembre 2011). Development, characterization and manufacturing of nanocomposites and bionanocomposites for transportation industry [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible

Gutierrez, J., Trochu, F., & Ruiz, E. (septembre 2011). Effects of high frequency vibrations on the compressibility of dry fibrous reinforcements [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible

Causse, P., Ruiz, E., & Trochu, F. (septembre 2011). Fabrication of curved parts by flexible injection : influence of processing conditions on composite quality and analysis of distortion [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible

Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (juillet 2011). Lightweight damping treatment of composite sandwich beams [Communication écrite]. 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil. Non disponible

Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (avril 2010). Advanced process simulation of resin transfer molding and application to fan blades for an aircraft engine [Communication écrite]. Forum des Journées européennes des composites, Paris, France. Non disponible

Gascon, L., Garcia, J. A., Chinesta, F., Ruiz, E., & Trochu, F. (juillet 2010). Analysis of the saturation in liquid composite molding processes using an essentially non-oscillatory (eno) technique [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland (5 pages). Lien externe

Francucci, G., Vazquez, A., Rodriguez, E., & Ruiz, E. (juillet 2010). Capillarity effect in vacuum assisted resin transfer molding with natural fibers [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe

Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Characterization of capillary effects in dual-scale fibrous reinforcements [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible

Ruiz, E., Achim, V., & Lebel, F. (juillet 2010). Characterization, analysis and design of RTM process [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe

Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Development of a capillary characterization setup for dual-scale analysis of fiber wetting [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible

Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Experimental analysis of flexible injection for curved composite parts [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe

Arbter, A., Beraud, J. M., Binetry, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., Endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Lomov, S. V., Long, A., Michaud, V., Morren, G., ... Ziegmann, G. (juillet 2010). Experimental determination of the permeability of textiles : a benchmark exercises [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe

Bensadoun, F., Kchit, N., Ruiz, E., & Trochu, F. (juillet 2010). Fabrication and mechanical properties of nanocomposites fabricated by rein infusion with bioresin and natural fibers [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible

Demaria, C., Ruiz, E., Trochu, F., Dambrine, B., & Godon, T. (mai 2010). Fabrication by resin transfer molding of a turbine blade reinforced by three-dimensional woven fabrics : Process simulation and optimization [Communication écrite]. Society for the Advancement of Material and Process Engineering's Spring Conference and Exhibition, Seattle, Washington. Non disponible

Kchit, N., Bensadoun, F., Billotte, C., Ruiz, E., & Trochu, F. (juillet 2010). Nano-clay composites made by liquid molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible

Trudeau, P., & Ruiz, E. (juillet 2010). Optimizing the fibre wetting in a novel polyurethane foam sandwich composite [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe

Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (juillet 2010). Simulation of resin transfer molding processing of a composite fan blade for an aircraft engine [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible

Kchit, N., Bensadoun, F., Carrozani, T., Billotte, C., Ruiz, E., Sol, H., & Trochu, F. (juillet 2010). A study of nano-claycomposites made by liquid composite molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe

Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Thermoelastic spring-in of curved composite parts manufactured by flexible injection [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible

Sola, M., Jetté, M.-A., Fotsing, E. R., Cimmino, M., Ross, A., & Ruiz, E. (juillet 2009). Analytical and experimental study of embedded damping elements in composite applications [Communication écrite]. 17th International Conference on Composite Materials, Edinburgh, UK. Non disponible

Garcia, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (juin 2009). An approach to simulate the saturation in RTM/VARI process [Communication écrite]. 3rd Manufacturing Engineering Society International Conference, Alcoy, Spain. Non disponible

Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (septembre 2009). Experimental investigation of dual-scale reinforcement imbibition [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware. Non disponible

Ruiz, E., & Achim, V. (juillet 2009). RTM process analysis and on-line characterization [Communication écrite]. 17th International Conference on Composite Materials, Edinburgh, UK (10 pages). Lien externe

Trochu, F., Demaria, C., Ruiz, E., Dambrine, B., & Gordon, T. (septembre 2009). RTM process simulation and optimization of composite fan blades reinforced by 3D woven fabrics [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware. Non disponible

Causse, P., Ruiz, E., & Trochu, F. (juillet 2008). Consolidation of curved composite parts manufactured by flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Ortega, I., & Ruiz, E. (juillet 2008). Dispersion and dielectric characterization of an epoxy resin reinforced with carbon nanofibers [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Ruiz, E., Briones, L., Allard, E., & Trochu, F. (juillet 2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part I : Experimental investigation [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Achim, V., & Ruiz, E. (juillet 2008). Guiding selection toward cost-effective composite manufacturing [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Demaria, C., Ruiz, E., & Trochu, F. (juillet 2008). In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Harismendy, I., Del Rio, M., Ruiz, E., & Garcia, J. A. (juillet 2008). Modelling VARTM of wind turbine blades under non-isothermal boundary conditions [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Chatel, S., Ruiz, E., Trochu, F., & Bréard, J. (juillet 2008). A permeability measurement method dedicated to a composite process family [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Daqoune, T., Ruiz, E., & Trochu, F. (juillet 2008). Study of the shape of the compaction chamber in flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Lebel, F., Trochu, F., & Ruiz, E. (juillet 2008). Thermosetting matrix composite characterization and cure control via a scale model mould [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe

Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (octobre 2007). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Communication écrite]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie. Non disponible

Croteau-Labouly, B., Achim, V., Ruiz, E., & Trochu, F. (août 2007). Combined characterization of permeability and compaction in porous media during vacuum assisted resin infusion [Communication écrite]. 6th Canadian International Composites Conference (CANCOM 2007), Winnipeg, Canada. Non disponible

Leclerc, J.-S., Meunier, P., & Ruiz, E. (juin 2007). Impact of injection pressure on voids formation and on mechanical properties of RTM composites [Communication écrite]. 19th Canadian Materials Science Conference, Hamilton, Ontario. Non disponible

Ruiz, E., Ortega, I., Abdellaoui, C., & Trudeau, P. (octobre 2007). Nanosilica-modified carbon/epoxy composites manufacturing and characterization [Communication écrite]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec. Non disponible

Ortega, I., Billotte, C., & Ruiz, E. (octobre 2007). Thermo-mechanical and rheological characterization of various epoxy-based nanocomposites for high performance composites [Communication écrite]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec. Non disponible

Ruiz, E., Achim, V., Breard, J., Chatel, S., & Trochu, F. (juillet 2006). A fast numerical approach to reduce void formation in liquid composite molding [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe

Hubert, P., Haider, M., Lessard, L., Ruiz, E., & Trochu, F. (mars 2006). Integrated Approach for Class A Surface Finish of Automotive Components Manufactured by RTM [Communication écrite]. 27th International SAMPE Europe Conference, Paris, France. Non disponible

Ruiz, E., Waffo, F., Owens, J., Billotte, C., & Trochu, F. (juillet 2006). Modeling of Resin Cure Kinetics for mOlding Cycle Optimization [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe

Ruiz, E., Chatel, S., & Trochu, F. (juillet 2006). A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe

Ruiz, E., Achim, V., Trochu, F., & Breard, J. (août 2005). Reduction of void formation in LCM a practical numerical approach [Communication écrite]. Canada composites International Conference, Vancouver, Canada. Non disponible

Haider, M., Ruiz, E., Hubert, P., & Lessard, L. (août 2005). Resin cure shrinkage and LPA action characterization for class A RTM processing [Communication écrite]. Canada composites International Conference, Vancouver, Canada. Non disponible

Ruiz, E., & Trochu, F. (septembre 2004). Approximation of resin flow in liquid composite molding using a new non-conforming three-dimensional finite element [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan. Non disponible

Ruiz, E., & Trochu, F. (juillet 2004). Multi-criteria thermal optimization by evolutionary algorithms of resin cure, processing stresses and cycle time in liquid composite molding [Communication écrite]. International Conference on Flow Processes in Composite Materials, Delaware, USA. Lien externe

Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (juillet 2004). New approaches to accelerate calculations and improve accuracy of numerical simulations in liquid composite molding [Communication écrite]. International Conference on Flow Processes in Composite Materials, Delaware, USA. Lien externe

Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (décembre 2004). Numerical optimization of injection flow rate in RTM to minimize micro/macro voids formation [Communication écrite]. Journées Scientifiques et Techniques "Mise en forme des matériaux composites", Le Havre, France. Non disponible

Ruiz, E., Gauvin, R., & Trochu, F. (septembre 2004). Processing stresses and thermal optimization in resin transfer molding [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan. Non disponible

Achim, V., Ruiz, E., Soukane, S., & Trochu, F. (novembre 2003). Optimization of flow rate in resin transfer molding (RTM) [Communication écrite]. 8th Japan International SAMPE Symposium and Exhibition, Tokyo, Japan. Non disponible

Ruiz, E., Trochu, F., & Gauvin, R. (novembre 2003). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 5th International Symposium on Advanced Composites, Corfu, Greece. Non disponible

Béchet, É., Ruiz, E., & Trochu, F. (août 2001). Remeshing algorithms applied to resin transfer moulding simulations [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe

Ruiz, E., & Trochu, F. (août 2001). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe

Ruiz, E., & Trochu, F. (décembre 2001). Thermal residual stress during the curing of composite parts manufactured by RTM [Communication écrite]. International Conference on Science and Technology of Composite Materials, Mar de Plata, Argentine. Non disponible

Trochu, F., Remade, J.-F., Bréard, J., Bénoit, Y., & Ruiz, E. (octobre 2000). Three dimensional resin transfer molding simulations : Control of the accuracy and industrial validation for complex ribbed parts [Communication écrite]. 3rd Joint Canada-Japan Workshop on Composites Design and Manufacturing, Kyoto, Japan. Lien externe

Présentation

Benavente, M., Marcin, L., Godon, T., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composite plates reinforced with 3D interlock fabrics [Présentation]. Dans 21st International Conference on Composite Materials, Xi. Lien externe

Demande de brevet

Ruiz, E., & Trochu, F. (2005). Manufacture of composites by a flexible injection process using a double or multiple cavity mold. (Demande de brevet no WO2005000566). Lien externe

Chapitre de livre

Ruiz, E., & Trochu, F. (2020). Flow modeling in composite reinforcements. Dans Boisse, P. (édit.), Composite Reinforcements for Optimum Performance (2e éd., p. 601-626). Lien externe

Ruiz, E., & Trochu, F. (2011). Flow modeling in composite reinforcements. Dans Boisse, P. (édit.), Research and Markets: Composite Reinforcements for Optimum Performance (1ère éd., p. 588-615). Lien externe

Liste produite: Sat Dec 6 03:29:44 2025 EST.