 | Monter d'un niveau |
Aubertin, M., Julien, M. R., Servant, S., & Gill, D. (1999). A Rate-Dependent Model for the Ductile Behavior of Salt Rocks. Lien externe
Aubertin, M., Sgaoula, J., Servant, S., Julien, M. R., Gill, D., & Landanyi, B. (juin 1996). An up-to-date version of SUVIC-D for modeling the behavior of salt [Communication écrite]. Conference on the Mechanical Behavior of Salt, Montréal, Québec. Publié dans Series on rock and soil mechanics, 22. Non disponible
Aubertin, M., Gill, D., & Ladanyi, B. (1994). Constitutive equations with internal state variables for the inelastic behavior of soft rocks. Applied Mechanics Reviews, 47(6S), S97-S101. Lien externe
Aubertin, M., & Gill, D. (1993). Elastoplastic modeling for the ductile behavior of polycrystalline sodium chloride with suvic. International Journal of Plasticity, 9(4), 479-505. Lien externe
Aubertin, M., Gill, D., Ladanyi, B., & Chapuis, R. P. (août 1991). Elastoplastic Modeling for Soft Rocks and Ceramics in the Ductile Regime [Communication écrite]. 3rd International Symposium on Plasticity and its Current Applications (PLASTICITY 1991), Grenoble, France. Lien externe
Corthésy, R., Gill, D., Leite, M.-H., & He, G. (août 1999). Laboratory validation of the 3-D borehole slotter stress calculation model [Communication écrite]. 9e Congrès international de mécanique des roches, Paris, FRA. Non disponible
Corthésy, R., He, G., Gill, D., & Leite, M.-H. (1999). A Stress Calculation Model for the 3D Borehole Slotter. International Journal of Rock Mechanics and Mining Sciences, 36(4), 493-508. Lien externe
Corthésy, R., Leite, M.-H., Gill, D., Basque, J. P., & Coulson, A. L. (juin 1999). Stress measurements in mine pillars using the RPR method [Communication écrite]. Rock mechanics for industry : 37th U.S. Rock mechanics symposium, Vail, Col, USA. Lien externe
Corthésy, R., Gill, D., & Leite, M.-H. (1998). Élaboration d'un modèle de prédiction des contraintes in-situ dans la région de la faille de Cadillac. CIM Bulletin, 91(1020), 54-58. Lien externe
Corthésy, R., Leite, M.-H., Gill, D., & Nguyen, D. Use of the modified doorstopper-IAM combination as a stress-meter [Communication écrite]. International Symposium on Rock Stress, Kumamoto. Non disponible
Corthésy, R., Gill, D., Leite, M.-H., & Thompson, P. M. (1995). Stress measurements in high-stress zones using the modified doorstopper technique - reply. Canadian Geotechnical Journal, 32(2), 382-383. Lien externe
Corthésy, R., Gill, D., & Leite, M.-H. Un modèle de prédiction des contraintes dans le nord-ouest québécois [Communication écrite]. Conférence régionale de l'IRSST, Val D'or, Québec. Non disponible
Corthésy, R., Leite, M.-H., Gill, D., He, G., & Germain, P. (juin 1994). First application of the RPR method to field measurements [Communication écrite]. 1st North American Rock Mechanics Symposium (NARMS), Austin, Texas. Lien externe
Corthésy, R., Leite, M.-H., He, G., & Gill, D. (1994). The RPR method for the doorstopper technique: Four or six stress components from one or two boreholes. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31(5), 507-516. Lien externe
Corthésy, R., & Gill, D. (septembre 1991). The influence of non linearity and anisotropy on stress measurement results [Communication écrite]. 7th International Society for Rock Mechanics and Rock Engineering Congress (ISRM 1991), Aachen, Germany. Lien externe
Gill, D., Corthésy, R., & Leite, M.-H. (2005). Determining the Minimal Number of Specimens for Laboratory Testing of Rock Properties. Engineering Geology, 78(1-2), 29-51. Lien externe
Gill, D., Corthésy, R., & Leite, M.-H. (2005). A statistical approach for determining practical rock strength and deformability values from laboratory tests. Engineering Geology, 78(1-2), 53-67. Lien externe
Gill, D., & Leite, M.-H. An algorithm to design mine pillars with the convergence-confining method [Communication écrite]. 3rd Canadian Conference Computer Applications in the Mining Industry (CAMI'95). Non disponible
Gill, D., & Leite, M.-H. (septembre 1995). Designing tunnel supports with the convergence-confinement method when the far stress field is anisotropic [Communication écrite]. 8th International Society for Rock Mechanics Congress (ISRM 1995), Tokyo, Japan. Lien externe
Gill, D., & Leite, M.-H. Dilatometer testing of rock [Communication écrite]. 4e Symposium international sur le pressiomètre, Sherbrooke, Québec. Non disponible
Gill, D., Leite, M.-H., & Labrie, D. (1994). Designing mine pillars with the convergence-confinement method. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31(6), 687-698. Lien externe
Gill, D., Dufresne, S., & Piché, A. (1994). Méthodologie de prévision des coûts de forage en galeries. CIM Bulletin, 87(980), 29-33. Lien externe
Gill, D., & Ladanyi, B. (août 1987). Time-dependent ground response curves for tunnel lining design [Communication écrite]. 6th International Society for Rock Mechanics and Rock Engineering Congress (ISRM 1987), Montréal, Québec. Lien externe
Gill, D., Beauchamp, Y., & Ladanyi, B. (juin 1981). A non-deterministic aspect of the simulation of rock mass failure [Communication écrite]. 22nd U.S. Symposium on Rock Mechanics (USRMS 1981), Cambridge, MA. Lien externe
He, G., Corthésy, R., Gill, D., Leite, M.-H., & Kanduth, H. Finite element analysis for the interpretation model of the 3D Borehole Slotter [Communication écrite]. 3rd Canadian Conference Computer Applications in the Mining Industry (CAMI'95). Non disponible
Kanduth, H. H., Corthésy, R., & Gill, D. (septembre 1991). Validation of borehole slotting as a method for in situ stress measurements [Communication écrite]. 7th International Society for Rock Mechanics and Rock Engineering Congress (ISRM 1991), Aachen, Germany. Lien externe
Leite, M.-H., Gill, D., & Corthésy, R. (1998). Experimental and Numerical Evaluation of Stress Redistribution in Thick-Walled Rocksalt Cylinders. International Journal of Rock Mechanics and Mining Sciences, 35(3), 367-383. Lien externe
Leite, M.-H., & Gill, D. Influence of the random orientation and of the non linear shear strength of geological discontinuities on the stability of tetrahedral rigid blocks near slopes [Communication écrite]. 5th South-American Congress on Rock Mechanics, Santos. Non disponible
Leite, M.-H., Corthésy, R., Gill, D., & Nguyen, D. Un nouveau capteur pour la mesure de contraintes relatives et absolues [Communication écrite]. 5ième Colloque du CRIB, Sherbrooke. Non disponible
Leite, M.-H., Corthésy, R., Gill, D., & Read, R. Some aspects of a stress calculation model for deep measurements using the modified doorstopper cell [Communication écrite]. International Symposium on Rock Stress, Kumamoto. Non disponible
Leite, M.-H., Corthésy, R., & Gill, D. (juin 1996). Field application of the RPR in situ stress calculation method [Communication écrite]. Rock mechanics, tools and techniques : 2nd North American Rock Mechanics Symposium, NARMS '96, Montréal, Québec. Non disponible
Leite, M.-H., Corthésy, R., Gill, D., St-Onge, M., & Don, N. (juin 1996). The IAM : A Down-the-hole conditioner/data logger for the modified doorstopper technique [Communication écrite]. Rock mechanics, tools and techniques : 2nd North American Rock Mechanics Symposium, NARMS '96, Montréal, Québec. Non disponible
Leite, M.-H., Corthésy, R., & Gill, D. (juin 1995). Determination of deformability parameters on overcores in heterogeneous non linear anisotropic rocks [Communication écrite]. 35th U.S. Symposium on Rock Mechanics, (USRMS 1995), Reno, NV. Lien externe
Leite, M.-H., Ladanyi, B., & Gill, D. An extension of the interpretation model for the sharp cone test for the determination of deformability parameters of rock-like materials [Communication écrite]. 4e Symposium international sur le pressiomètre, Sherbrooke, Québec. Non disponible
Leite, M.-H., Corthésy, R., Gill, D., & Beaupré, G. Reducing the use of cement in backfilled stopes [Communication écrite]. 3rd Canadian Conference Computer Applications in the Mining Industry (CAMI'95). Non disponible
Leite, M.-H., Ladanyi, B., & Gill, D. (1994). Deformability of rock-like materials using a sharp cone test. Geotechnical Testing Journal, 17(2), 195-206. Lien externe
Ladanyi, B., & Gill, D. (avril 1983). In-situ determination of creep properties of rock salt [Communication écrite]. 5th International Society for Rock Mechanics and Rock Engineering Congress (ISRM 1983), Melbourne, Australia. Lien externe
Sgaoula, J., Aubertin, M., & Gill, D. (juin 1995). Using internal state variables for modeling the viscoplastic behavior of rocksalt in the semi-brittle regime [Communication écrite]. 35th U.S. Symposium on Rock Mechanics, (USRMS 1995), Reno, NV. Lien externe
Wendling, G., Chapuis, R. P., & Gill, D. (1997). Quantifying the effects of well development in unconsolidated material. Ground Water, 35(3), 387-393. Lien externe
