Documents dont l'auteur est "Dickson, J. Ivan"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Nombre de documents: 72

Article de revue

Bellemare, S. C., Dickson, J. I., Bureau, M. N., & Denault, J. (2005). Bulk Fatigue Damage Evolution in Polyamide-6 and in a Polyamide-6 Nanocomposite. Polymer Composites, 26(5), 636-646. Lien externe

Bellemare, S. C., Bureau, M. N., Denault, J., & Dickson, J. I. (2004). Fatigue Crack Initiation and Propagation in Polyamide-6 and in Polyamide-6 Nanocomposites. Polymer Composites, 25(4), 433-441. Lien externe

Perrin, F., Bureau, M. N., Denault, J., & Dickson, J. I. (2003). Mode I interlaminar crack propagation in continuous glass fiber/polypropylene composites: temperature and molding condition dependence. Composites Science and Technology, 63(5), 597-607. Lien externe

Bureau, M. N., Perrin, F., Denault, J., & Dickson, J. I. (2002). Interlaminar Fatigue Crack Propagation in Continuous Glass Fiber/Polypropylene Composites. International Journal of Fatigue, 24(2-4), 99-108. Lien externe

Xu, S., Koul, A. K., & Dickson, J. I. (2001). Creep Crack Growth in the Absence of Grain Boundary Precipitates in Udimet 520. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 32(3), 795-804. Lien externe

Bureau, M. N., Denault, J., & Dickson, J. I. (2001). Effect of the Molding Conditions on Mode Ii Interlaminar Crack Propagation in Continuous Glass Fiber/Polypropylene Composites. Journal of Thermoplastic Composite Materials, 14(5), 374-403. Lien externe

Bureau, M. N., Denault, J., & Dickson, J. I. (2001). Fractographic Interpretation of the Fatigue Crack Propagation Behavior of Polystyrene and Polystyrene/Polyethylene Blends. Journal of Materials Science Letters, 20(20), 1901-1904. Lien externe

Xu, S., Wu, X. J., Koul, A. K., & Dickson, J. I. (1999). An Intergranular Creep Crack Growth Model Based on Grain Boundary Sliding. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(4), 1039-1045. Lien externe

Bureau, M. N., Dickson, J. I., & Denault, J. (1998). Comparison of the Fatigue Propagation Behaviour of Polystyrene and 95/5 Polystyrene/Polyethylene Blends. Journal of Materials Science, 33(6), 1591-1606. Lien externe

Bureau, M. N., Dickson, J. I., & Denault, J. (1998). Fatigue Propagation Behaviour of Polystyrene/Polyethylene Blends. Journal of Materials Science, 33(6), 1405-1419. Lien externe

Xu, S., Dickson, J. I., & Koul, A. K. (1998). Grain Growth and Carbide Precipitation in Superalloy, Udimet 520. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 29(11), 2687-2695. Lien externe

Bureau, M. N., El Kadi, H., Denault, J., Dickson, J. I., & Frechinet, S. (1996). Processing-structure-property relations in PS/PE blends: Compression versus injection molding. Journal of Engineering and Applied Science, 2, 2220-2224. Non disponible

Dickson, J. I., Shiqiong, L., & Bailon, J.-P. (1992). Microstructural and fractographic aspects of corrosion fatigue. Materials Characterization, 28(3), 327-347. Lien externe

Blanchette, Y., Dickson, J. I., & Bailon, J.-P. (1989). Influence of simultaneously occurring brittle cracking on ductile fatigue crack growth rates—Part I. Modelling of the semi-cohesive zone. Engineering Fracture Mechanics, 33(4), 633-642. Lien externe

Blanchette, Y., Bailon, J.-P., & Dickson, J. I. (1989). Influence of simultaneously occurring brittle cracking on ductile fatigue crack growth rates—Part II. Comparison of experimental results with model predictions. Engineering Fracture Mechanics, 33(4), 643-654. Lien externe

Li, S., Dickson, J. I., Bailon, J.-P., & Tromans, D. (1989). The influence of the stress intensity factor on the fractography of stress corrosion cracking of 316 stainless steel. Materials Science & Engineering A, 119, 59-72. Lien externe

Dickson, J. I., Handfield, L., Lalonde, S., Sahoo, M., & Bailon, J.-P. (1988). Corrosion-fatigue crack propagation behavior of Mn-Ni-Al bronze propeller alloys. Journal of Materials Engineering, 10(1), 45-56. Lien externe

Marchand, N. J., Bailon, J.-P., & Dickson, J. I. (1988). Near- threshold fatigue crack growth in copper and alpha- brass: Grain- size and environmental effects. Metallurgical Transactions A, 19(10), 2575-2587. Lien externe

Martin, P., Dickson, J. I., & Bailon, J.-P. (1985). Stress corrosion cracking in aluminium alloy 7075-T651 by discrete crack jumps as indicated by fractography and acoustic emission. Materials Science & Engineering, 67(1), L9-L13. Lien externe

Bassidi, M. A., Masounave, J., Dickson, J. I., & Bailon, J.-P. (1984). Fatigue-corrosion de l'acier austeno-ferritique KCR 171 dans l'eau blanche. [Corrosion Fatigue of Duplex KCR 171 Stainless Steel in White Water]. Canadian Metallurgical Quarterly, 23(1), 17-24. Lien externe

Boutin, J., Marchand, N., Bailon, J.-P., & Dickson, J. I. (1984). An intermediate plateau in the cyclic stress-strain curve of α brass. Materials Science and Engineering, 67(2), L23-L27. Lien externe

Dickson, J. I., Lu, M.-C., & Bailon, J.-P. (1983). The influence of strain aging on the fatigue crack propagation threshold. Scripta Metallurgica, 17(1), 49-52. Lien externe

Dickson, J. I., Martin, P., & Bailon, J.-P. (1983). The study of variations in stress corrosion cracking velocities in aluminium alloy 7075-T651 by acoustic emission. Materials Science and Engineering, 58(2), L5-L8. Lien externe

Dickson, J. I., Bailon, J.-P., & Masounave, J. (1981). A Review on the Threshold Stress Intensity Range for Fatigue Crack Propagation. Canadian Metallurgical Quarterly, 20(3), 317-329. Lien externe

Commentaire ou lettre

Bailon, J.-P., Dickson, J. I., Masounave, J., & Bathias, C. (1980). Technical note: Comments on “the threshold stress intensity range in fatigue” [Commentaire ou lettre]. Fatigue & Fracture of Engineering Materials & Structures, 3(3), 277-283. Lien externe

Rapport technique

Bailon, J.-P., & Dickson, J. I. (1985). Analysis of automotive Leaf Springs Failure. (Rapport technique). Non disponible

Dickson, J. I., Handfield, L., Lalonde, S., Blanchette, Y., & Bailon, J.-P. (1985). Corrosion-fatigue of Mn-Ni-Al bronze alloys. (Rapport technique). Non disponible

Communication écrite

Verniquet, E., Roberge, R., Lalonde, S., & Dickson, J. I. Hydrogen-Assisted Cracking of Quenched and Tempered Aisi 4135 Steel in an Hydroxide Solution [Communication écrite]. Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions. Non disponible

Bellemare, S. C., Bureau, M. N., Denault, J., & Dickson, J. I. Fatigue resistance of polyamide 6 and polyamide 6/clay nanocomposite [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe

Dickson, J. I. (août 2000). Corrosion fatigue crack initiation and crack propagation [Communication écrite]. Environmentally Induced Cracking of Metals; as held at the 39th Annual Conference of Metallurgists of CIM, Ottawa, Ontario, Canada. Non disponible

Bureau, M. N., Denault, J., Perrin, F., & Dickson, J. I. (mai 2000). Crack propagation in continuous glass fiber/polypropylene composites: matrix microstructure effect [Communication écrite]. Antec 2000, Orlando, FL. Lien externe

Xu, S., Dickson, J. I., Koul, A. K., & Wu, X. J. (août 2000). Effect of environment on the creep crack growth behaviour of superalloys [Communication écrite]. Environmentally Induced Cracking of Metals: international symposium, Ottawa, Canada. Non disponible

Bureau, M. N., Di Francesco, E., Denault, J., & Dickson, J. I. (octobre 1997). Mechanical behavior of injection-molded polystyrene/polyethylene blends: fracture toughness versus fatigue crack propagation [Communication écrite]. Conference on Polymer Blends, Alloys and Filled Systems (Polyblends - 97), Boucherville, Québec. Publié dans Polymer engineering and science, 39(6). Lien externe

Berechid, D., Larouche, D., Bailon, J.-P., & Dickson, J. I. (juin 1999). Mechanisms of Fatigue Crack Propagation in an Aluminium Matrix Composite [Communication écrite]. 7th International Fatigue Congress (FATIGUE 1999), Beijing, China. Non disponible

Dickson, J. I., Vogt, J.-B., Messai, A. H., & Foct, J. (septembre 1997). A fractographic study of the low temperature fracture of a high Mn, high N austenitic stainless steel [Communication écrite]. 1997 TMS Fall Meeting, Indianapolis, IN, USA. Non disponible

Bureau, M. N., Di Francesco, E., Denault, J., & Dickson, J. I. (octobre 1997). Mechanical behavior of injection-molded polystyrene/polyethylene blends: Fracture toughness versus fatigue crack propagation [Communication écrite]. 1997 International Symposium on Polymer Blends, Alloys and Filled Systems, POLYBLENDS, Boucherville, Can. Non disponible

Dickson, J. I., Bailon, J.-P., Xia, J., & Bureau, M. N. (mai 1993). Extrusions-intrusions in cu and 70 Cu-30 Zn [Communication écrite]. 5th International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1993), Montréal, Québec. Non disponible

Ranganathan, N., Petit, S., Li, S., Bailon, J.-P., & Dickson, J. I. (mai 1993). Fatigue crack growth mechanisms in a 8090-T651 alunimium-lithium allow [Communication écrite]. 5th International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1993), Montréal, Québec. Non disponible

Dickson, J. I., Handfield, L., Leblanc, P., Shiqiong, L., & Bailon, J.-P. (août 1991). Fatigue propagation behaviour of Mn-Al-Ni bronzes [Communication écrite]. International Symposium on Copper, Ottawa, On, Canada. Non disponible

Jin, X., Dickson, J. I., & Bailon, J.-P. (juillet 1990). A comparison of the surface topography produced by the cyclic deformation of copper and 70 Cu-3-Znₓ-Brass [Communication écrite]. 4th International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1990), Honolulu, Hawai. Non disponible

Shiqiong, L., Dickson, J. I., & Bailon, J.-P. (juillet 1990). The fractography of near threshold fatigue cracking in B.C.C. metals [Communication écrite]. 4th International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1990), Honolulu, Hawai. Non disponible

Bailon, J.-P., Dickson, J. I., Shiqiong, L., & Larouche, D. (juillet 1990). Mechanisms of fatigue cracking at and near the threshold [Communication écrite]. 4th International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1990), Honolulu, Hawai. Non disponible

Dickson, J. I., Xia, J., Bureau, N. M., & Bailon, J.-P. (septembre 1990). Plasticity-induced Crack Closure and Fatigue Short Crack Propagation at the Toe of a Fillet Welded Joint [Communication écrite]. 6th Colloquium on Fundamental Fatigue Mechanisms. Non disponible

Verreman, Y., Dickson, J. I., & Bailon, J.-P. (avril 1988). Generalization of the Kitagawa Diagram to V-Notched Members [Communication écrite]. NATO Advanced Studies Institute on Advances in Fatigue and Science and Technology, Alvor, Portugal. Lien externe

Tremblay, V., Nguyen-Duy, P., & Dickson, J. I. (juin 1987). Influence of Cathodic Charging on the Tensile and Fracture Properties of Three High-Strength Steels [Communication écrite]. 20th National Symposium on Fracture Mechanics: Perspectives and Directions, Bethlehem, PA, USA. Lien externe

Lalonde, S., Dickson, J. I., Baldantoni, A., Bailon, J.-P., & Wallace, E. (avril 1988). Separate Contributions of Corrosion-Product Induced and Roughness-Induced Crack Closure to the Fatigue Threshold of Al Alloys [Communication écrite]. NATO Advanced Studies Institute on Advances in Fatigue and Science and Technology, Alvor, Portugal. Lien externe

Bailon, J.-P., Dickson, J. I., & Shiqiong, L. (avril 1988). Relationship Between Fractographic Features and Fatigue Propagation Mechanisms at or Near the Threshold [Communication écrite]. International Colloquium "Basic Mechanisms in Fatigue of Metals", Brno, Czechoslovakia. Non disponible

Dickson, J. I., Shiqiong, L., & Bailon, J.-P. (juin 1987). An explanation of the fractography of near-threshold fatigue in FCC metals [Communication écrite]. 3rd International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1987), Charlottesville, Virginia. Non disponible

Dickson, J. I., Turenne, S., Bailon, J.-P., & Vogt, J. B. (septembre 1987). The Formation of Ribbon-Like Extrusions and Intrusions During the Cyclic Deformation of Copper [Communication écrite]. 2nd International Symposium on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Munich, Germany. Lien externe

Blanchette, Y., Dickson, J. I., & Bailon, J.-P. (juin 1987). Influence of cleavage on fatigue propagation rates in a low carbon steel [Communication écrite]. 3rd International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1987), Charlottesville, Virginia. Non disponible

Dickson, J. I., Turenne, S., Vogt, J. B., & Bailon, J.-P. (août 1985). The Formation of Extrusions and Intrusions in Copper and in a Mild Steel [Communication écrite]. 7th International Conference on the Strength of Metals and Alloys (ICSMA 7), Montréal, Québec. Lien externe

Martin, P., Dickson, J. I., & Bailon, J.-P. (janvier 1986). Monitoring Stress-Corrosion Cracking by Acoustic Emission [Communication écrite]. Corrosion Monitoring in Industrial Plants Using Nondestructive Testing and Electrochemical Methods, West Conshohocken, PA. Lien externe

Dickson, J. I., Handfield, L., Lalonde, S., & Bailon, J.-P. (août 1985). The Influence of Microstructure on the Fatigue Threshold of Mn-Ni-Al Bronzes [Communication écrite]. 7th International Conference on the Strength of Metals and Alloys (ICSMA 7), Montréal, Québec. Lien externe

Boutin, J., Dickson, J. I., & Bailon, J.-P. (juin 1984). Cyclic Deformation of 70-30 -brass : Cyclic Internal and Effective Stresses and Dislocation Substructures [Communication écrite]. 11th Canadian Fracture Conference on Time-Dependent Fracture, Ottawa, On, Canada. Lien externe

Dickson, J. I., Bailon, J.-P., Bassidi, M. A., & Masounave, J. (décembre 1984). The δkth behaviour of three stainless steels in different environments [Communication écrite]. 6th International Conference on Fracture (ICF6), New Delhi, India. Lien externe

Bailon, J.-P., & Dickson, J. I. (juin 1984). Fatigue : Testing and Meaning [Communication écrite]. 5th International Congress on Experimental Mechanics (ICEM-5), Montréal, Québec. Non disponible

Dickson, J. I., Handfield, L., Bailon, J.-P., & Sahoo, M. (septembre 1984). The fatigue and corrosion fatigue crack growth behavior of a Mn-Ni-Al bronze [Communication écrite]. 2nd International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1984), Birmingham, UK. Non disponible

Dickson, J. I., & Bailon, J.-P. (juin 1984). The Fractography of Environmentally Assisted Cracking [Communication écrite]. 11th Canadian Fracture Conference on Time-Dependent Fracture, Ottawa, On, Canada. Lien externe

Bailon, J.-P., Dickson, J. I., & El-Boujdaini, M. (octobre 1983). Environmental Effects on Kth in 70-30 -brass and 2024-T3 Al alloy [Communication écrite]. TMS-AIME Fall Meeting, Philadelphia, Pennsylvania, USA. Non disponible

Marchand, N., Bailon, J.-P., & Dickson, J. I. (mai 1982). The Cyclic Response and Strain Life Behaviour of Polycrystalline Copper and -Brass [Communication écrite]. 2nd International Symposium on Defects, Fracture and Fatigue, Mont Gabriel, Qc, Canada. Lien externe

Bassidi, M. A., Masounave, J., Bailon, J.-P., & Dickson, J. I. (mai 1982). A Fractographic Study of Corrosion Fatigue Crack Propagation in a Duplex Stainless Steel [Communication écrite]. 2nd International Symposium on Defects, Fracture and Fatigue, Mont Gabriel, Qc, Canada. Lien externe

Livre

Bailon, J.-P., Masounave, J., & Dickson, J. I. (1997). La fatigue des matériaux et des structures. (2e éd.). Non disponible

McQueen, H. J., Bailon, J.-P., & Dickson, J. I. (1985). Strength of Metals and Alloys. Lien externe

Chapitre de livre

Masounave, J., Bailon, J.-P., & Dickson, J. I. (2013). Fatigue Crack Growth Laws. Dans Fatigue of Materials and Structures: Fundamentals (p. 231-267). Lien externe

Bailon, J.-P., Masounave, J., & Dickson, J. I. (2008). Les lois de fissuration par fatigue. Dans La fatigue des matériaux et des structures (p. 119-152). Non disponible

Bureau, M. N., El Kadi, H., Denault, J., Dickson, J. I., & Frechinet, S. (1999). Processing-structure-property relations in PS/PE blends: Compression versus injection molding. Dans Behnam, P. (édit.), Imaging and Image Analysis Applications for Plastics (p. 145-154). Lien externe

Bailon, J.-P., Masounave, J., & Dickson, J. I. (1997). Les lois de fissuration par fatigue. Dans La fatigue des matériaux et des structures (2e éd., p. 255-278). Non disponible

Bailon, J.-P., Masounave, J., & Dickson, J. I. (1997). Le seuil de propagation. Dans La fatigue des matériaux et des structures (2e éd.). Non disponible

Masounave, J., Dickson, J. I., & Bailon, J.-P. (1984). Fractography. Dans Rupture, Contrôle, Sûreté (p. 327-375). Non disponible

Masounave, J., Dickson, J. I., & Bailon, J.-P. (1984). Rupture fragile. Dans Rupture, Contrôle, Sûreté . Non disponible

Bailon, J.-P., Masounave, J., & Dickson, J. I. (1980). Les lois de fissuration par fatigue. Dans La fatigue des matériaux et des structures (p. 201-236). Non disponible

Bailon, J.-P., Masounave, J., & Dickson, J. I. (1980). Le seuil de propagation. Dans La fatigue des matériaux et des structures (p. 237-269). Non disponible

Liste produite: Fri Dec 20 03:45:55 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0