 | Up a level |
Mechter, M. A., Gadour, M., Romain, L., Tuysuz, O., & Brochu, M. (2024). Microstructural and fatigue characterization of 316L stainless steel subjected to flow drilling and tapping: comparison with machined threads. Engineering Failure Analysis, 164, 108730 (13 pages). Available
Wawrzyniak, N., Wanjara, P., Brochu, M., & Brochu, M. (2024). Measuring the tensile properties of Ti6Al4V fabricated by laser powder bed fusion: Influence of specimen dimensions. Theoretical and Applied Fracture Mechanics, 131, 104419 (10 pages). External link
Harandizadeh Najafabadi, D., Barabi, A., Thibault, D., & Brochu, M. (2023). Hydrogen-enhanced fatigue crack growth of martensitic stainless steel: A predictive model and experimental validation. Theoretical and Applied Fracture Mechanics, 127, 104066 (15 pages). External link
Laliberté-Riverin, S., Yassine, S. R., Mena-Morcillo, E., Sanni, K., Cova, M., Hassanipour, M., Provencher, P. R., Mauzeroll, J., & Brochu, M. (2023). Microstructure, corrosion behavior, and fatigue resistance of laser powder bed fusion-produced precipitation-hardening martensitic M789 stainless steel. Surfaces and Interfaces, 103830 (29 pages). External link
Wawrzyniak, N., Provencher, P. R., Brochu, M., & Brochu, M. (2023). Tensile properties of SS316L produced by LPBF: Influence of specimen dimensions and surface condition. Materials Characterization, 203, 11 pages. External link
Laliberté-Riverin, S., & Brochu, M. (2022). A novel approach for quantifying hydrogen embrittlement using side-grooved CT samples. Engineering Fracture Mechanics, 265, 108324 (14 pages). External link
Leitao Martins, L. F., Provencher, P. R., Brochu, M., & Brochu, M. (2021). Effect of Platform Temperature and Post-Processing Heat Treatment on the Fatigue Life of Additively Manufactured AlSi7Mg Alloy. Metals, 11(5), 23 pages. External link
Pessard, E., Lavialle, M., Laheurte, P., Didier, P., & Brochu, M. (2021). High-cycle fatigue behavior of a laser powder bed fusion additive manufactured Ti-6Al-4V titanium: Effect of pores and tested volume size. International Journal of Fatigue, 149, 12 pages. External link
Robitaille, B., Provencher, P. R., St-Georges, L., & Brochu, M. (2021). Mechanical properties of 2024-T3 AlClad aluminum FSW lap joints and impact of surface preparation. International Journal of Fatigue, 143, 105979 (12 pages). External link
Tenni, B., Godin, S., Thibault, D., & Brochu, M. (2021). Shielding Gas and Inclusion Content Effects on Impact Toughness and Tensile Properties of 410NiMo Steel Welds. Welding Journal, 100(2), 52S-62S. External link
Bellemare, J., Laliberté-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Coating density as the key factor behind hydrogen embrittlement of cadmium-plated 4340 steel. Journal of Applied Electrochemistry, 50(10), 1045-1058. External link
Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography. Materialia, 12, 12 pages. External link
Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. External link
Wu, Y., Schmitt, T., Bousser, É., Khelfaoui, F., Najarian, V., Sapieha, J.-E., & Brochu, M. (2020). Effects of interfacial microstructure on mechanical properties of Stellite-hardfaced coating during long-term aging. Surface and Coatings Technology, 398, 11 pages. External link
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages. External link
Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Internal hydrogen embrittlement of pre-cracked, cadmium-plated AISI 4340 high strength steel with sustained load tests and incremental step-loading tests. Engineering Fracture Mechanics, 223, 106773 (13 pages). External link
Wu, Y., Schmitt, T., Bousser, É., Vernhes, L., Khelfaoui, F., Perez, G., Sapieha, J.-E., & Brochu, M. (2020). Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers. Surface and Coatings Technology, 390, 11 pages. External link
Hodonou, C., Kerbrat, O., Balazinski, M., & Brochu, M. (2020). Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 861-873. External link
Bellemare, J., Laliberte-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Subtleties Behind Hydrogen Embrittlement of Cadmium-Plated 4340 Steel Revealed by Thermal Desorption Spectroscopy and Sustained-Load Tests. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(6), 3054-3065. External link
Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages). External link
Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284. External link
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157. External link
Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. External link
Hodonou, C., Balazinski, M., Brochu, M., & Mascle, C. (2019). Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. International Journal of Advanced Manufacturing Technology, 103(1-4), 1509-1517. External link
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2019). Rebuttal to comments by R. Dumas. Multibody System Dynamics, 47(4), 439-440. External link
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. External link
Wu, Y., Bousser, É., Schmitt, T., Tarfa, N., Khelfaoui, F., Rene, R., Sapieha, J.-E., & Brochu, M. (2019). Thermal stability of a Stellite/steel hardfacing interface during long-term aging. Materials Characterization, 154, 181-192. External link
Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. External link
Klotz, T., Miao, H. Y., Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened Inconel 718. International Journal of Fatigue, 113, 204-221. External link
Bianchetti, C., Zheng, R., Chromik, R. R., Lévesque, M., & Brochu, M. (2018). Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Engineering Fracture Mechanics, 202, 20-32. External link
Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. External link
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2018). Influence of the load modelling during gait on the stress distribution in a femoral implant. Multibody System Dynamics, 44(1), 93-105. External link
de Pannemaecker, A., Fouvry, S., Buffiere, J. Y., & Brochu, M. (2018). Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches. International Journal of Fatigue, 117, 75-89. External link
Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T7451. International Journal of Fatigue, 111, 289-298. External link
Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21. External link
Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2017). 1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718. Mechanics of Materials, 109, 34-41. External link
Ellyson, B., Brochu, M., & Brochu, M. (2017). Characterization of bending vibration fatigue of slm fabricated Ti-6Al-4V. International Journal of Fatigue, 99, 25-34. External link
Ellyson, B., Chekir, N., Brochu, M., & Brochu, M. (2017). Characterization of bending vibration fatigue of WBD fabricated Ti-6A1-4V. International Journal of Fatigue, 101, 36-44. External link
Larochelle, J. S., Desilets-Benoit, A., Borduas, G., Laliberte-Riverin, S., Roorda, S., & Brochu, M. (2017). Hydrogen loss during N-15 nuclear reaction analysis of high strength steel. Nuclear Instruments & Methods in Physics Research. Section B, Beam Interactions With Materials and Atoms, 409, 343-346. External link
Deschênes, P. A., Lanteigne, J., Verreman, Y., Paquet, D., Lévesque, J. B., & Brochu, M. (2017). A new experimental method to study the influence of welding residual stresses on fatigue crack propagation. International Journal of Fatigue, 100, 444-452. External link
Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. External link
Gervais, B., Vadean, A., Raison, M., & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, 30-38. Available
El Mourid, A., Ganesan, R., Brochu, M., & Lévesque, M. (2016). Effect of temperature on the failure modes of a triaxially braided polymer matrix composite. International Journal of Solids and Structures, 97-98, 1-15. External link
de Pannemaecker, A., Fouvry, S., Brochu, M., & Buffiere, J. Y. (2016). Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments. International Journal of Fatigue, 82, 211-225. External link
El Mourid, A., Ganesan, R., Brochu, M., Crochon, T., & Lévesque, M. (2015). Anisotropic oxidation due to aging in a triaxially braided composite and its influence on tensile failure. Composites Part B: Engineering, 76, 1-12. External link
Dezecot, S., & Brochu, M. (2015). Microstructural characterization and high cycle fatigue behavior of investment cast A357 aluminum alloy. International Journal of Fatigue, 77, 154-159. External link
Trudel, A., Sabourin, M., Lévesque, M., & Brochu, M. (2014). Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld. International Journal of Fatigue, 66, 39-46. External link
Trudel, A., Lévesque, M., & Brochu, M. (2014). Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld. Engineering Fracture Mechanics, 115, 60-72. External link
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2012). Propagation of short fatigue cracks in permanent and semi-solid mold 357 alumiunum alloy. International Journal of Fatigue, 36(1), 120-129. External link
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2010). High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy. International Journal of Fatigue, 32(8), 1233-1242. External link
Yassine, S., Laliberté-Riverin, S., Mena Morcillo, E., Cova, M., Brochu, M., & Mauzeroll, J. (2022, May). Effect of the microstructure on the corrosion and fatigue behavior of the additively manufactured M789 stainless steel [Paper]. 241st ECS meeting, Vancouvert, Canada. Published in ECS Meeting Abstracts, MA2022-01(16). External link
Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (2018, May). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Paper]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Published in MATEC Web of Conferences, 165. Available
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2017, June). Development of a Tool for the Sensitivity Analysis of Design Parameters of Femoral Implants in the Human Body During Gait [Paper]. 8th ECCOMAS Thematic Conference on MULTIBODY DYNAMICS, Prague, République tchèque. Unavailable
Bianchetti, C., Lévesque, M., & Brochu, M. (2017, September). Effect of shot peening on the fatigue life of AA 7050-T7451 [Paper]. 13th International Conference on Shot Peening, Montréal, Québec. External link
Tenni, B., Godin, S., Thibault, D., & Brochu, M. (2017, June). Shielding gas and oxide content effects on impact properties of 410NiMo steel weldments [Paper]. 14th International Conference on Fracture (ICF 2017), Rhodes, Greece. External link
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2017, September). Study of short crack growth in shot peened 300M steel [Paper]. 13th International Conference on Shot Peening, Montréal, Québec. External link
Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (2016, July). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Paper]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic. External link
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2016, May). Dynamical evolution of stress distribution of a femoral orthopedic implant using multibody dynamics with finite element modeling [Paper]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec (3 pages). Unavailable
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2016, May). Evolution of the stress distribution of a femoral orthopedic implant by combining multibody dynamics and finite element modeling [Paper]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Abou Antoun, A., Brochu, M., & Moller, H. (2014, September). Effect of the rheocasting process and of the SLS layer on the fatigue behavior of 357 aluminum alloy [Paper]. 13th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2014), Muscat, Oman. Published in Solid State Phenomena, 217-218. External link
Trudel, A., Lévesque, M., & Brochu, M. (2013, June). Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel [Paper]. 13th International Conference on Fracture, Beijing, China (10 pages). Unavailable
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (2008, September). Fatigue behavior of semi-solid cast aluminum: A critical review [Paper]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Published in Solid State Phenomena, 141-143. External link
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. Fatigue des pièces d'aluminium fabriquées par voie semi-solide [Paper]. Journée du REGAL 2007. Unavailable
Klotz, T., Delbergue, D., Miao, H. Y., Bocher, P., Lévesque, M., & Brochu, M. (2017, September). Analytical fatigue life prediction of shot peened Inconel 718 [Presentation]. In 13th International Conference on Shot Peening, Montréal, Québec. External link
Bag, A., Lévesque, M., & Brochu, M. (2017, June). Investigation on the effect of shot peening on short fatigue crack growth in a high strength steel [Presentation]. In 29th Canadian Materials Science Conference, Ottawa, Canada. Unavailable
Bag, A., Lévesque, M., & Brochu, M. (2015, August). Analytical fatigue life prediction of shot-peened 300M steel [Presentation]. In Conference of Metallurgist (COM2015), Toronto, Canada. Unavailable
Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2015, August). Modelling of Inconel 718 crack tip's plastic zone softening during crack propagation [Presentation]. In Conference of Metallurgist (COM2015), Toronto, Canada. Unavailable
Bianchetti, C., Lévesque, M., & Brochu, M. (2015, June). Prédiction analytique de l'effet du grenaillage sur la vie en fatigue de l'alliage d'aluminium 7050 [Presentation]. In Journée des étudiants du REGAL, Québec, Canada. Unavailable
Brochu, M. (1999). Modélisation de l'écoulement des poudres métalliques par l'introduction de paramètres microstructuraux [Master's thesis, École Polytechnique de Montréal]. Available
Brochu, M. (2010). Comportement en fatigue de l'aluminium 357 coulé par gravité et rhéocoulé. [Ph.D. thesis, École Polytechnique de Montréal]. Available
Laliberté-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography [Dataset]. External link
