 | Monter d'un niveau |
Myriam BrochuDépartement de génie mécanique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages. Lien externe
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157. Lien externe
Abou Antoun, A., Brochu, M., & Moller, H. (septembre 2014). Effect of the rheocasting process and of the SLS layer on the fatigue behavior of 357 aluminum alloy [Communication écrite]. 13th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2014), Muscat, Oman. Publié dans Solid State Phenomena, 217-218. Lien externe
Bellemare, J., Laliberté-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Coating density as the key factor behind hydrogen embrittlement of cadmium-plated 4340 steel. Journal of Applied Electrochemistry, 50(10), 1045-1058. Lien externe
Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. Lien externe
Bellemare, J., Laliberte-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Subtleties Behind Hydrogen Embrittlement of Cadmium-Plated 4340 Steel Revealed by Thermal Desorption Spectroscopy and Sustained-Load Tests. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(6), 3054-3065. Lien externe
Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages). Lien externe
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. Lien externe
Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. Lien externe
Bianchetti, C., Zheng, R., Chromik, R. R., Lévesque, M., & Brochu, M. (2018). Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Engineering Fracture Mechanics, 202, 20-32. Lien externe
Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T7451. International Journal of Fatigue, 111, 289-298. Lien externe
Bianchetti, C., Lévesque, M., & Brochu, M. (septembre 2017). Effect of shot peening on the fatigue life of AA 7050-T7451 [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Bag, A., Lévesque, M., & Brochu, M. (juin 2017). Investigation on the effect of shot peening on short fatigue crack growth in a high strength steel [Présentation]. Dans 29th Canadian Materials Science Conference, Ottawa, Canada. Non disponible
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Study of short crack growth in shot peened 300M steel [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Bag, A., Lévesque, M., & Brochu, M. (août 2015). Analytical fatigue life prediction of shot-peened 300M steel [Présentation]. Dans Conference of Metallurgist (COM2015), Toronto, Canada. Non disponible
Bianchetti, C., Lévesque, M., & Brochu, M. (juin 2015). Prédiction analytique de l'effet du grenaillage sur la vie en fatigue de l'alliage d'aluminium 7050 [Présentation]. Dans Journée des étudiants du REGAL, Québec, Canada. Non disponible
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2012). Propagation of short fatigue cracks in permanent and semi-solid mold 357 alumiunum alloy. International Journal of Fatigue, 36(1), 120-129. Lien externe
Brochu, M. (2010). Comportement en fatigue de l'aluminium 357 coulé par gravité et rhéocoulé. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2010). High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy. International Journal of Fatigue, 32(8), 1233-1242. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (juillet 2009). Fatigue testing of a cast aluminum alloy : experimental challenges [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible
Brochu, M., Verreman, Y., & Ajersch, F. (2009). La mise en forme dans le domaine semi-solide : des avantages métallurgiques et économiques. Materiaux et techniques, 97(2), 90-93. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (septembre 2008). Fatigue behavior of semi-solid cast aluminum: A critical review [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. Fatigue des pièces d'aluminium fabriquées par voie semi-solide [Communication écrite]. Journée du REGAL 2007. Non disponible
Brochu, M. (1999). Modélisation de l'écoulement des poudres métalliques par l'introduction de paramètres microstructuraux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
de Pannemaecker, A., Fouvry, S., Buffiere, J. Y., & Brochu, M. (2018). Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches. International Journal of Fatigue, 117, 75-89. Lien externe
Deschênes, P. A., Lanteigne, J., Verreman, Y., Paquet, D., Lévesque, J. B., & Brochu, M. (2017). A new experimental method to study the influence of welding residual stresses on fatigue crack propagation. International Journal of Fatigue, 100, 444-452. Lien externe
de Pannemaecker, A., Fouvry, S., Brochu, M., & Buffiere, J. Y. (2016). Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments. International Journal of Fatigue, 82, 211-225. Lien externe
Dezecot, S., & Brochu, M. (2015). Microstructural characterization and high cycle fatigue behavior of investment cast A357 aluminum alloy. International Journal of Fatigue, 77, 154-159. Lien externe
Ellyson, B., Brochu, M., & Brochu, M. (2017). Characterization of bending vibration fatigue of slm fabricated Ti-6Al-4V. International Journal of Fatigue, 99, 25-34. Lien externe
Ellyson, B., Chekir, N., Brochu, M., & Brochu, M. (2017). Characterization of bending vibration fatigue of WBD fabricated Ti-6A1-4V. International Journal of Fatigue, 101, 36-44. Lien externe
El Mourid, A., Ganesan, R., Brochu, M., & Lévesque, M. (2016). Effect of temperature on the failure modes of a triaxially braided polymer matrix composite. International Journal of Solids and Structures, 97-98, 1-15. Lien externe
El Mourid, A., Ganesan, R., Brochu, M., Crochon, T., & Lévesque, M. (2015). Anisotropic oxidation due to aging in a triaxially braided composite and its influence on tensile failure. Composites Part B: Engineering, 76, 1-12. Lien externe
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2019). Rebuttal to comments by R. Dumas. Multibody System Dynamics, 47(4), 439-440. Lien externe
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2018). Influence of the load modelling during gait on the stress distribution in a femoral implant. Multibody System Dynamics, 44(1), 93-105. Lien externe
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (juin 2017). Development of a Tool for the Sensitivity Analysis of Design Parameters of Femoral Implants in the Human Body During Gait [Communication écrite]. 8th ECCOMAS Thematic Conference on MULTIBODY DYNAMICS, Prague, République tchèque. Non disponible
Gervais, B., Vadean, A., Raison, M., & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, 30-38. Disponible
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (mai 2016). Dynamical evolution of stress distribution of a femoral orthopedic implant using multibody dynamics with finite element modeling [Communication écrite]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec (3 pages). Non disponible
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (mai 2016). Evolution of the stress distribution of a femoral orthopedic implant by combining multibody dynamics and finite element modeling [Communication écrite]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Harandizadeh Najafabadi, D., Barabi, A., Thibault, D., & Brochu, M. (2023). Hydrogen-enhanced fatigue crack growth of martensitic stainless steel: A predictive model and experimental validation. Theoretical and Applied Fracture Mechanics, 127, 104066 (15 pages). Lien externe
Hodonou, C., Kerbrat, O., Balazinski, M., & Brochu, M. (2020). Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 861-873. Lien externe
Hodonou, C., Balazinski, M., Brochu, M., & Mascle, C. (2019). Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. International Journal of Advanced Manufacturing Technology, 103(1-4), 1509-1517. Lien externe
Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. Lien externe
Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (mai 2018). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Communication écrite]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Publié dans MATEC Web of Conferences, 165. Disponible
Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (juillet 2016). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Communication écrite]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic. Lien externe
Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284. Lien externe
Klotz, T., Miao, H. Y., Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened Inconel 718. International Journal of Fatigue, 113, 204-221. Lien externe
Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21. Lien externe
Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2017). 1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718. Mechanics of Materials, 109, 34-41. Lien externe
Klotz, T., Delbergue, D., Miao, H. Y., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Analytical fatigue life prediction of shot peened Inconel 718 [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (août 2015). Modelling of Inconel 718 crack tip's plastic zone softening during crack propagation [Présentation]. Dans Conference of Metallurgist (COM2015), Toronto, Canada. Non disponible
Laliberté-Riverin, S., Yassine, S. R., Mena-Morcillo, E., Sanni, K., Cova, M., Hassanipour, M., Provencher, P. R., Mauzeroll, J., & Brochu, M. (2023). Microstructure, corrosion behavior, and fatigue resistance of laser powder bed fusion-produced precipitation-hardening martensitic M789 stainless steel. Surfaces and Interfaces, 103830 (29 pages). Lien externe
Laliberté-Riverin, S., & Brochu, M. (2022). A novel approach for quantifying hydrogen embrittlement using side-grooved CT samples. Engineering Fracture Mechanics, 265, 108324 (14 pages). Lien externe
Leitao Martins, L. F., Provencher, P. R., Brochu, M., & Brochu, M. (2021). Effect of Platform Temperature and Post-Processing Heat Treatment on the Fatigue Life of Additively Manufactured AlSi7Mg Alloy. Metals, 11(5), 23 pages. Lien externe
Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography. Materialia, 12, 12 pages. Lien externe
Laliberté-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography [Ensemble de données]. Lien externe
Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Internal hydrogen embrittlement of pre-cracked, cadmium-plated AISI 4340 high strength steel with sustained load tests and incremental step-loading tests. Engineering Fracture Mechanics, 223, 106773 (13 pages). Lien externe
Larochelle, J. S., Desilets-Benoit, A., Borduas, G., Laliberte-Riverin, S., Roorda, S., & Brochu, M. (2017). Hydrogen loss during N-15 nuclear reaction analysis of high strength steel. Nuclear Instruments & Methods in Physics Research. Section B, Beam Interactions With Materials and Atoms, 409, 343-346. Lien externe
Mechter, M. A., Gadour, M., Romain, L., Tuysuz, O., & Brochu, M. (2024). Microstructural and fatigue characterization of 316L stainless steel subjected to flow drilling and tapping: comparison with machined threads. Engineering Failure Analysis, 164, 108730 (13 pages). Disponible
Pessard, E., Lavialle, M., Laheurte, P., Didier, P., & Brochu, M. (2021). High-cycle fatigue behavior of a laser powder bed fusion additive manufactured Ti-6Al-4V titanium: Effect of pores and tested volume size. International Journal of Fatigue, 149, 12 pages. Lien externe
Robitaille, B., Provencher, P. R., St-Georges, L., & Brochu, M. (2021). Mechanical properties of 2024-T3 AlClad aluminum FSW lap joints and impact of surface preparation. International Journal of Fatigue, 143, 105979 (12 pages). Lien externe
Tenni, B., Godin, S., Thibault, D., & Brochu, M. (2021). Shielding Gas and Inclusion Content Effects on Impact Toughness and Tensile Properties of 410NiMo Steel Welds. Welding Journal, 100(2), 52S-62S. Lien externe
Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. Lien externe
Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. Lien externe
Tenni, B., Godin, S., Thibault, D., & Brochu, M. (juin 2017). Shielding gas and oxide content effects on impact properties of 410NiMo steel weldments [Communication écrite]. 14th International Conference on Fracture (ICF 2017), Rhodes, Greece. Lien externe
Trudel, A., Sabourin, M., Lévesque, M., & Brochu, M. (2014). Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld. International Journal of Fatigue, 66, 39-46. Lien externe
Trudel, A., Lévesque, M., & Brochu, M. (2014). Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld. Engineering Fracture Mechanics, 115, 60-72. Lien externe
Trudel, A., Lévesque, M., & Brochu, M. (juin 2013). Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel [Communication écrite]. 13th International Conference on Fracture, Beijing, China (10 pages). Non disponible
Wawrzyniak, N., Wanjara, P., Brochu, M., & Brochu, M. (2024). Measuring the tensile properties of Ti6Al4V fabricated by laser powder bed fusion: Influence of specimen dimensions. Theoretical and Applied Fracture Mechanics, 131, 104419 (10 pages). Lien externe
Wawrzyniak, N., Provencher, P. R., Brochu, M., & Brochu, M. (2023). Tensile properties of SS316L produced by LPBF: Influence of specimen dimensions and surface condition. Materials Characterization, 203, 11 pages. Lien externe
Wu, Y., Schmitt, T., Bousser, É., Khelfaoui, F., Najarian, V., Sapieha, J.-E., & Brochu, M. (2020). Effects of interfacial microstructure on mechanical properties of Stellite-hardfaced coating during long-term aging. Surface and Coatings Technology, 398, 11 pages. Lien externe
Wu, Y., Schmitt, T., Bousser, É., Vernhes, L., Khelfaoui, F., Perez, G., Sapieha, J.-E., & Brochu, M. (2020). Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers. Surface and Coatings Technology, 390, 11 pages. Lien externe
Wu, Y., Bousser, É., Schmitt, T., Tarfa, N., Khelfaoui, F., Rene, R., Sapieha, J.-E., & Brochu, M. (2019). Thermal stability of a Stellite/steel hardfacing interface during long-term aging. Materials Characterization, 154, 181-192. Lien externe
Yassine, S. R., Lacasse, R., Deschênes, P.-A., Brochu, M., & Mauzeroll, J. (2023). Influence of Crack Tip Plasticity on the Microstructure and Corrosion Behavior of CA6NM Stainless Steel Measured Using Scanning Electrochemical Cell Microscopy (SECCM). Meeting abstracts (Electrochemical Society. CD-ROM), MA2023-01(18), 1480. Lien externe
Yassine, S., Laliberté-Riverin, S., Mena Morcillo, E., Cova, M., Brochu, M., & Mauzeroll, J. (mai 2022). Effect of the microstructure on the corrosion and fatigue behavior of the additively manufactured M789 stainless steel [Communication écrite]. 241st ECS meeting, Vancouver, Canada. Publié dans ECS Meeting Abstracts, MA2022-01(16). Lien externe
