Documents dont l'auteur est "Allaire, Claude"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : A | D | E | F | G | H | L | N | P | Q | R | S

Nombre de documents: 64

A

Allaire, C. (2012). Interfacial Phenomena. Dans Fundamentals of Refractory Technology (Vol. 125, p. 289-307). Lien externe

Afshar, S., Allaire, C., & Dajoux, E. (août 2004). Effects of Salts on Metal Oxidation and Refractory Corrosion Induced by Molten Aluminum Alloys [Communication écrite]. Advances in Refractories for the Metallurgical Industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible

Allaire, C., Innus, A., & Pelletier, R. (août 2004). Interaction of Refractory Thermo-Physical Properties With Molten Al-5% Mg [Communication écrite]. Advances in Refractories for the Metallurgical Industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible

Allaire, C., Pineault, J.-B., & Cadieux, A. (août 2004). Molten aluminum temperature measurement with the use of a novel thermocouple assembly [Communication écrite]. International Symposium on Advances in Refractories for the Metallurgical Industries IV, Hamilton, Ont, Canada. Non disponible

Afshar, S., & Allaire, C. (août 2004). Protection of Aluminosilicate Aggregates Against the Corrosion by Molten Aluminum [Communication écrite]. Advances in Refractories for the Metallurgical Industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible

Allaire, C., Allaire, J., & Carbonneau, A. (mars 2004). Room and high temperature measurement of the elastic properties of refractories using a new apparatus and set-up [Communication écrite]. Light Metals 2004. 133rd TMS Annual Meeting, Charlotte, NC, USA. Lien externe

Afshar, S., Gaubert, C., & Allaire, C. (2003). Effects of fumed silica and barite on the aluminium resistance of alumina castable. JOM, 55(11), 66-69. Lien externe

Afshar, S., & Allaire, C. (2001). Furnaces: Improving Low Cement Castables by Non-Wetting Additives. JOM, 53(8), 24-27. Lien externe

Allaire, C., Pelletier, R., Siljan, O.-J., & Tabereaux, A. (février 2001). An improved corrosion test for potlining refractories [Communication écrite]. Light Metals 2001 held at the 130th TMS Annual Meeting, New Orleans, Louisiana. Lien externe

Allaire, C., & Guermazi, M. (2000). Corrosion of furnace refractories by molten aluminum. Modern casting, 90(4), 45-48. Non disponible

Allaire, C., & Afshar, S. (2000). The corrosion of refractory aggregates by molten aluminum. JOM, 52(5), 43-46. Lien externe

Allaire, C. (2000). Mechanisms of corundum growth in refractories exposed to Al-Mg alloys. Aluminum Transactions, 3(1), 105-120. Non disponible

Allaire, C., & Guermazi, M. (mars 2000). Protecting refractories against corundum growth in aluminum treatment furnaces [Communication écrite]. Light Metals 2000 as held at the 129th TMS Annual Meeting, Nashville, TN. Lien externe

Allaire, C. (2000). Refractories for molten aluminum confinement. Canadian ceramics, 69(1), A14-A21. Non disponible

Allaire, C., & Guermazi, M. (1999). Corrosion of furnace refractories by molten aluminum. Aluminum Transactions, 1(1), 163-170. Non disponible

Allaire, C. (janvier 1999). Les matériaux réfractaires pour le confinement de l'aluminium liquide [Communication écrite]. Symposium sur la coulée de l'aluminium. Non disponible

Allaire, C., & Guermazi, M. (août 1999). New method for testing refractories for resistant to corundum attack [Communication écrite]. International Symposium on Advances in Refractories for the Metallurgical Industries III, Québec City, Québec, Canada. Non disponible

Allaire, C., & Guermazi, M. (août 1999). Protecting refractories against corundum growth in aluminum treatment furnaces (abstract only) [Communication écrite]. International Symposium on Advances in Refractories for the Metallurgical Industries III, Québec City, Québec, Canada. Lien externe

Allahevrdi, M., Afshar, S., & Allaire, C. (1998). Additives and the Corrosion Resistance of Aluminosilicate Refractories in Molten Al-5mg. JOM, 50(2), 30-34. Lien externe

Allaire, C., & Afshar, S. (février 1998). Stability of anorthite-based dry-barrier mixes in aluminum reduction cells' potlining [Communication écrite]. 127th TMS Annual Meeting, San Antonio, TX, USA. Lien externe

Allaire, C., & Fradet, C. (août 1997). Comparative evaluation between a low alumina:silica ratio dry-barriermix and conventional refractories in aluminum reduction cells'potlining [Communication écrite]. International Symposium on Light Metals 1997 Métaux Légers as held at the 36th Annual Conference of Metallurgists of CIM, Sudbury, Ontario, Canada. Non disponible

Allahverdi, M., Allaire, C., & Afshar, S. (1997). Effect of BaSO₄ , CaF₂ , and AlF₃ as well as Na₂O on aluminosilicates having a mullite-like composition. Journal of the Canadian Ceramic Society, 66(3), 223-230. Non disponible

Afshar, S., Allaire, C., Quesnel, S., & Allahverdi, M. (1996). Corrosion des réfractaires alunimosiliceux au contact de l'aluminium liquide. AL13 : le magazine de l'aluminium, 2(2), 19-36. Non disponible

Afshar, S., & Allaire, C. (1996). The corrosion of refractories by molten aluminum. JOM, 48(5), 23-27. Lien externe

Allahverdi, M., Afshar, S., & Allaire, C. (janvier 1996). Corrosion resistance of aluminosilicate ceramics to molten Al-5% Mg alloy [Communication écrite]. Advances in refractories for the metallurgical industries II. Non disponible

Allaire, C., & Lavigne, L. (août 1995). Modulus of elasticity of coarse grain materials as a function of temperature [Communication écrite]. Recent metallurgical advances in light metals industries : international symposium, Vancouver, BC, CAN. Non disponible

Allaire, C., & Desclaux, P. (1994). Cyanide inhibitors for the carbon cathode materials in aluminum reduction cells. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 25(2), 221-226. Lien externe

Allaire, C. (février 1994). Effect of the type of brick and mortar on the resistance to deflection of the flue walls in horizontal flue carbon baking furnaces [Communication écrite]. 123rd TMS Annual Meeting on Light Metals, San Francisco, CA, USA. Lien externe

Allaire, C. (1994). Efficiency of steel plate barriers in aluminum reduction cell potlining refractories. Journal of the Canadian Ceramic Society, 63(2), 128-131. Non disponible

Allaire, C., Rigaud, M., & Dallaire, S. (1989). Basic Phosphate-Bonded Castables from Dolomitic-Magnesite Clinkers. Journal of the American Ceramic Society, 72(9), 1698-1703. Lien externe

D

Dehghani, K., & Allaire, C. (août 2002). Changes in hot modulus of rupture with the characteristics of aluminosilicate refractories [Communication écrite]. International Symposium on Metal/Ceramic Interactions, Montréal, Québec. Non disponible

Dehghani, K., & Allaire, C. (2001). Microstructure dependence of creep in aluminosilicate refractories used in aluminum industry - part I: effect of impurities. Aluminum Transactions. Non disponible

Dehghani, K., & Allaire, C. (2001). Microstructure dependence of creep in aluminosilicate refractories used in aluminum industry - part II: effect of porosity, density and refractory grain characteristics. Aluminum Transactions. Non disponible

Dehghani, K., & Allaire, C. (2001). Parameters affecting the creep behavior of aluminosilicate refractories used in aluminum industry. Aluminum Transactions. Non disponible

E

Ébacher, V., Pelletier, R., & Allaire, C. (février 2005). Experimental investigation on stress-corrosion of refractories exposed to liquid aluminum [Communication écrite]. 134th TMS Annual Meeting. Lien externe

F

Feng, C., & Rigaud, M. (août 1999). Melting behavior and performance of mold powders for continuous casting [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible

G

Gao, J., Afshar, S., & Allaire, C. (mars 2004). Corrosion kinetics of refractory by molten aluminium [Communication écrite]. Light Metals 2004. 133rd TMS Annual Meeting, Charlotte, NC, USA. Lien externe

H

He, H., Kovac, V., Rigaud, M., & Chabry, P. (août 1999). Oxidation behavior of graphitic materials usable in monolithic refractories [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible

L

Labib, A., & Allaire, C. (1996). Dynamic Young's modulus as a function of soft thermal shock temperatures for cathode block materials for aluminum reduction cells. Canadian Ceramic Society Journal, 65(2), 143-150. Non disponible

N

Ntakaburimvo, N., & Allaire, C. (août 2004). Abrasion Wear of Aluminosilicate Refractories [Communication écrite]. Advances in Refractories for the Metallurgical Industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible

Ntakaburimvo, N., & Allaire, C. (mars 2004). Effect of corrosion by molten Al-5wt.% Mg on mechanical and physical properties of aluminosilicate refractories [Communication écrite]. Light Metals 2004. 133rd TMS Annual Meeting, Charlotte, NC, USA. Lien externe

Ntakaburimvo, N., & Allaire, C. (février 2002). Experimental investigation on the wear resistance of refractories : effect of the nature of the exposed surface [Communication écrite]. 131st TMS Annual Meeting. Lien externe

Ntakaburimvo, N., Allaire, C., & Sebbani, J. (août 2002). Influence of the firing temperature and mineralogy on the thermo-mechanical behavior of aluminosilicate refractory castables [Communication écrite]. International Symposium on Metal/Ceramic Interactions, Montréal, Québec. Non disponible

P

Pelletier, R., & Allaire, C. (février 2005). An improved thermal fatigue characterization method for refractories [Communication écrite]. 2005 TMS Annual Meeting, San Francisco, CA. Non disponible

Pelletier, R., Allaire, C., & Herny, E. (août 2004). Experimental investigation of molten aluminium penetration into ceramic powders [Communication écrite]. Advances in refractories for the metallurgical industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible

Pelletier, R., & Allaire, C. (2003). Corrosion of Potlining Refractories: a Comparison Between Different Cell Lining Designs Using a Unified Approach. JOM, 55(11), 58-62. Lien externe

Pelletier, R., & Allaire, C. (mars 2002). Degradation of carbon cathodes in aluminium reduction cells [Communication écrite]. 38th symposium on refractories, Chesterfield, Missouri. Non disponible

Pelletier, R., & Allaire, C. (mars 2001). Corrosion of potlining refractories: a comparison between different cell lining designs using a unified approach [Communication écrite]. Thirty-seventh Symposium on Refractories, St. Louis, Missouri. Non disponible

Pelletier, R., Allaire, C., Siljan, O. J., & Tabereaux, A. (2001). The Corrosion of Potlining Refractories: a Unified Approach. JOM, 53(8), 18-22. Lien externe

Perron, M. E., & Allaire, C. (2001). Effect of Cryolite on Formation of Al₂O₃/Al Composites Produced by Oxidation of Molten Al-Mg Alloy. British Ceramic Transactions, 100(1), 16-22. Lien externe

Perron, M.-È., & Allaire, C. (2000). Effect of several parameters on corundum growth in aluminum treatment furnaces. Canadian ceramics, 69(2), 31-35. Non disponible

Pelletier, R., & Allaire, C. (février 1999). Experimental investigation of frost heaving in aluminum reduction cells using a water model [Communication écrite]. 128th TMS Annual Meeting 'Light Metals 1999', San Diego, CA. Publié dans Light Metals: Proceedings of Sessions, TMS Annual Meeting. Lien externe

Pelletier, R., Allaire, C., & Gilbert, C. (août 1995). Cathode block heaving in aluminium reduction cells: an update on frost heaving [Communication écrite]. Recent metallurgical advances in light metals industries : international symposium, Vancouver, BC, CAN. Non disponible

Q

Quesnel, S., Allaire, C., & Afshar, S. (février 1998). Criteria for choosing refractories in aluminum holding and melting furnaces [Communication écrite]. Light metals 1998, TMS proceedings, San Antonio, Texas. Lien externe

Quesnel, S., Allaire, C., & Afshar, S. (août 1996). Corrosion of refractories at the bellyband of aluminium holding and melting furnaces [Communication écrite]. Advances in refractories for the metallurgical industries II : 35th Annual conference of Metallurgists of CIM, Montréal, Québec. Non disponible

Quesnel, S., Afshar, S., & Allaire, C. (février 1996). Corrosion of refractories at the bellyband of aluminum melting and holding furnaces [Communication écrite]. 1996 125th TMS Annual Meeting, Anaheim, CA, USA. Lien externe

R

Rigaud, M., & Allaire, C. (2002). Ceramics and industrial refractories of École Polytechnique. Refractory applications and news, 7(2). Non disponible

Rebouillat, L., Rigaud, M., Daniellou, P., & Dubreuil, P. (août 1999). Hydraulically-bonded andalusite-based castables [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible

Richter, T., Vezza, T., Allaire, C., & Afshar, S. (septembre 1998). Castable with improved corrosion resistance against aluminium [Communication écrite]. Refractories in Non-Ferrous Metallurgy. 41st International Colloquium on Refractories, Aachen, GER. Non disponible

Ratle, A., Pandolfelli, V. C., Allaire, C., & Rigaud, M. (1997). Correlation between thermal shock and mechanical impact resistance of refractories. British Ceramic Transactions, 96(4), 225-236. Non disponible

Ratle, A., & Allaire, C. (1996). New method for impact testing of refractories. Canadian Ceramic Society Journal, 65(4), 263-269. Non disponible

Ratle, A., Lagacé, M., Pandolfelli, V., Allaire, C., & Rigaud, M. (1996). A simple method for evaluating elastic modulus of refractories at high temperatures. Canadian Ceramic Quarterly, 65(3), 202-205. Non disponible

S

Sebbani, M. J. E., & Allaire, C. (2001). Mechanical Impact Fatigue of Refractories. British Ceramic Transactions, 100(5), 193-196. Lien externe

Sebbani, M. J. E., Allaire, C., & Ntakaburimvo, N. (2000). Influence of Firing Temperature on Correlation Between Thermal Shock and Mechanical Impact Resistance of Refractory Castables. British Ceramic Transactions, 99(5), 215-218. Lien externe

Liste produite: Mon Nov 18 03:53:01 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Allaire, Claude"

Aide

A

D

E

F

G

H

L

N

P

Q

R

S