 | Up a level |
Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A., & Mureithi, N. (2009, May). Étude du comportement des roulements dans les rotors tournant à haute vitesse [Paper]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France (15 pages). Unavailable
Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A., & Mureithi, N. (2009, October). Instabilité des fraiseuses opérant à haute vitesse, provoquée par l'intéraction des défauts de roulements avec les résonances [Paper]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C.. External link
Bouzidane, A., Thomas, M., & Lakis, A. (2008). Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers. Journal of Tribology, 130(4). External link
Badri, B., Thomas, M., Lakis, A., & Mureithi, N. (2008). Les vibrations en UHV. (Technical Report). Unavailable
Badri, B., Thomas, M., Sassi, S., & Lakis, A. (2007, June). Combination of bearing defect simulator and artificial neural network for the diagnosis of damaged bearings [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Badri, B., Thomas, M., Archambault, R., Sassi, S., & Lakis, A. (2007, June). Rapid Julien transform: A new method for shock detection and time-domain classification [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Badri, B., Thomas, M., Sassi, S., Archambault, R., Lakis, A., & Mureithi, N. (2007, October). The shock extractor [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick (11 pages). External link
Badri, B., Thomas, M., Archambault, R., Sassi, S., Lakis, A., & Mureithi, N. (2007, December). Une nouvelle méthode pour différentier les signaux de chocs synchrones et asynchrones [A new method to detect synchronous and asynchronous shock data in a signal]. [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Unavailable
Badri, B., Archambault, R., Thomas, M., Sassi, S., & Lakis, A. (2006, October). La transformée de Julien pour différencier les chocs synchrones des chocs asynchrones [The Julien transform to detect synchronous and asynchronous shock data]. [Paper]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. External link
Esmailzadeh, M., Lakis, A., Thomas, M., & Marcouiller, L. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. Journal of Sound and Vibration, 328(1-2), 109-128. External link
Esteve, A., Badri, B., Zagbani, I., Thomas, M., & Lakis, A. (2009). Les problèmes de vibration en UHV. (Technical Report). Unavailable
Esmailzadeh, M., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Three-dimensional modeling of curved structures containing and/or submerged in fluid. Finite Elements in Analysis and Design, 44(6-7), 334-345. External link
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2009, July). Critical velocity of potential flow in interaction with a system of plates [Paper]. 17th International Conference on Nuclear Engineering (ICONE 2009), Brussels, Belgium. External link
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2009, September). Hybrid element in fluid-structure interaction of plates and shells [Paper]. 12th International Conference on Civil, Structural and Environmental Engineering, Madeira, Portugal. Unavailable
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Computational Modeling of Coupled Fluid-Structure Systems With Applications. Structural Engineering and Mechanics, 29(1), 91-111. External link
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Modelling of plates subjected to flowing fluid under various boundary conditions. Engineering Applications of Computational Fluid Mechanics, 2(4), 525-539. External link
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Vibration analysis of rectangular plates coupled with fluid. Applied Mathematical Modelling, 32(12), 2570-2586. External link
Komgom, N. C., Mureithi, N., Lakis, A., & Thomas, M. (2007, October). Bearing fault detection using pattern recognition methods applied to the Case Western Reserve University bearing data [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick. Unavailable
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2007). Dynamic analysis of coupled-fluid structure systems. WSEAS Transactions on Applied and Theoretical Mechanics, 1(2), 265-274. Unavailable
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2007, June). Dynamic analysis of coupled-fluid structure systems [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2007). Hybrid Method for Vibration Analysis of Rectangular Plates. Nuclear Engineering and Design, 237(8), 791-801. External link
Komgom, N. C., Mureithi, N., Lakis, A., & Thomas, M. (2007, December). On the use of time synchronous averaging, independent component analysis and support vector machines for bearing fault diagnosis [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. External link
Komgom, N. C., Mureithi, N., Lakis, A., & Thomas, M. (2007, December). Time synchronous analysis and pattern recognition methods for bearing fault detection [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Unavailable
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2006, November). Dynamic analysis of coupled fluid-structure systems [Paper]. 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2006), Venice, Italy. External link
Merlet, S., Thomas, M., Lakis, A., & Marcouiller, L. (2006). Conception d'un banc d'essais pour modèles de turbines hydrauliques. (Technical Report). Unavailable
Masson, P., Micheau, P., Pasco, Y., Thomas, M., Brailovski, V., Meunier, M., Peter, Y.-A., Mateescu, D., Misra, A., Mrad, N., Pinsonnault, J., & Cambron, A. (2006, January). Smart Technologies for Structural Health Monitoring of Aerospace Structures [Paper]. International Workshop on Smart Materials and Smart Structures, Toronto, Canada. Unavailable
Mabrouki, F., Thomas, M., & Lakis, A. (2004, October). Improving the vibratory behaviour of a flexible plate using combined experimental measurements and finite element modelling [Paper]. 22nd Seminar on Machinery Vibration, Ottawa, Ontario (18 pages). Unavailable
Ouahabi, A., Thomas, M., & Lakis, A. (2009, May). Hybrid monitoring of crack location in riveted plates by combining an experimental modal analysis with numerical models [Paper]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France. Unavailable
Ouahabi, A., Thomas, M., & Lakis, A. (2006, October). Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence [Paper]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. External link
Ouahabi, A., Thomas, M., & Lakis, A. (2006, July). Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis [Paper]. 3rd European Workshop on Structural Health Monitoring, Granada, Spain. Unavailable
Palaisi, D., Guibault, R., Thomas, M., Lakis, A., & Mureithi, N. (2009, October). Simulations numériques du comportement vibratoire d'engrenages endommagés [Numerical simulations of damaged gear vibrations]. [Paper]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C.. External link
Piedboeuf, M. C., Gauvin, R., & Thomas, M. (1998). Damping Behaviour of Shape Memory Alloys: Strain Amplitude, Frequency and Temperature Effects. Journal of Sound and Vibration, 214(5), 885-901. External link
Ruban, T., Vu Viet, H., Thomas, M., Lakis, A., & Marcouiller, L. (2007). Conception des structures d'essais d'interaction fluide-structure. (Technical Report). Unavailable
Sghir, K. A., El Badaoui, M., Thomas, M., Zaghbani, I., Songméné, V., Lakis, A., & Mureithi, N. (2009, May). Identification aveugle paramétrique de la fonction de réponse impulsionnelle basée sur la cyclostationnarité de second ordre à partir des réponses seulement [Paper]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France. Unavailable
Sghir, K. A., Thomas, M., Lakis, A., & Mureithi, N. (2008). Signaux d'une fraiseuse haute vitesse. (Technical Report). Unavailable
Sassi, S., Badri, B., Thomas, M., & Lakis, A. (2008, June). Tracking surface degradation of ball bearing by means of new time domain scalar indicators [Paper]. 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic (12 pages). Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2007, June). Machinery diagnosis by wavelet analysis [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2005, April). Using short-time Fourier transform in machinery diagnosis [Paper]. 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO 2005), Rio de Janeiro, Brazil (7 pages). External link
Safizadeh, M. S., Lakis, A., & Thomas, M. (2004, February). Rotating machinery fault diagnosis using time-frequency methods [Paper]. WSEAS Multiconference, Salzburg, Austria. External link
Safizadeh, M. S., Lakis, A., & Thomas, M. (2002, October). Gear fault diagnosis using time frequency methods [Diagnostic de défauts d'engrenages par analyse temps-fréquence]. [Paper]. 20th Seminar on Machinery Vibration, Québec, Québec. External link
Safizadeh, M. S., Lakis, A., & Thomas, M. (2002, October). Rotating machinery fault diagnosis using time-frequency methods [Paper]. 20th Machinery Vibration, Reliability and Maintenance Seminar and Annual General Meeting, Québec, Québec. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2002, June). Time-frequency algorithms and their applications [Paper]. EUROMECH Colloquium 437 : Identification and Updating Methods of Mechanical Structures, Prague, Czech Republic. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2002). Time-frequency distributions and their application to machinery fault detection. International Journal of Condition Monitoring and Diagnosis Engineering Management, 5(2), 41-56. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2000, March). Diagnostic des machines par les méthodes temps-fréquence [Paper]. Annual Canadian Machinery Vibration Association Seminar, Montréal, Québec. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2000). Time-frequency algorithms and their applications. International Journal of Computers and Their Applications, 7(4), 20 pages. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (2000). Using short-time Fourier transforms in machinery fault diagnosis. International Journal of COMADEM, 3(1), 5-16. Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Application of short-time fourier transform in machine fault detection. (Technical Report n° EPM-RT-99-05). Available
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999, July). Application of short-time Fourier transform in machine fault detection [Paper]. 12th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1999), Sunderland, UK. Unavailable
Smail, M., Thomas, M., & Lakis, A. (1999). ARMA models for modal analysis: Effect of model orders and sampling frequency. Mechanical Systems and Signal Processing, 13(6), 925-941. External link
Smail, M., Thomas, M., & Lakis, A. (1999). Assessment of optimal ARMA model orders for modal analysis. Mechanical Systems and Signal Processing, 13(5), 803-819. External link
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Condition monitoring and diagnostic of rotating machinery by means of wavelet transforms. (Technical Report n° EPM-RT-99-07). Available
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Fault detection and identification using Wigner-Ville distribution. (Technical Report n° EPM-RT-99-06). Available
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Time-frequency algorithm. (Technical Report n° EPM-RT-99-08). Unavailable
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999, January). Using short-time Fourier transform in machinery fault diagnosis [Paper]. International Conference and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1999), Sunderland, UK. Unavailable
Smail, M., Thomas, M., & Lakis, A. (1999, June). Utilisation de la modélisation ARMA pour la détection de fissures dans les rotors [Paper]. 3rd Industrial Automation International Conference, Montréal, Québec. Unavailable
Smail, M., Thomas, M., & Lakis, A. (1998, October). Use of ARMA modelization for faults detection in rotating machinery [Paper]. 3rd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostics Techniques, Senlis, France. Unavailable
Thomas, M., Abassi, K., Lakis, A., & Marcouiller, J. L. (2005, October). Analyse modale expérimentale d'une structure soumise à un écoulement turbulent [Operational modal analysis of a structure subjected to a turbulent flow]. [Paper]. 23rd Seminar on Machinery Vibration, Edmonton, Alberta. External link
Thomas, M., Lakis, A., & Archambault, R. (2004, October). A new technique to detect rolling element bearing faults: the Julien method [Paper]. 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France. Unavailable
Thomas, M., & Lakis, A. (2002, June). Detection of breathing crack by time-frequency analysis [Paper]. 30th International Conference on Computers & Industrial Engineering, Tinos Island, Greece. Unavailable
Thomas, M., Lakis, A., Hamidi, L., & Massoud, M. (2002, October). Rotor health monitoring by modal analysis [Paper]. 20th Seminar on Machinery Vibration, Québec, Québec. External link
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2011). Operational modal analysis by updating autoregressive model. Mechanical Systems and Signal Processing, 25(3), 1028-1044. External link
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2011). Spectrum and operational modal analysis with vector autoregressive models. In Mechanical Vibrations: Types, Testing and Analysis (57-93). Unavailable
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2009, May). Online monitoring of varying modal parameters by operating modal analysis and model updating [Paper]. 2nd International Conference on Industrial Risk Engineering (CIRI 2009), Reims, France (19 pages). External link
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2009, July). Operational modal analysis by short time autoregressive modeling [Paper]. 3rd International Conference on Integrity, Reliability & Failure (IRF 2009), Porto, Portugal. Unavailable
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2009, October). Software for operational modal analysis and automatic identification of modal parameters [Paper]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C. (16 pages). External link
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2007, October). Effects of added mass on submerged vibrating structures [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick (9 pages). External link
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2007, April). Identification of modal parameters by operational modal analysis for the assessment of bridge rehabilitation [Paper]. 2nd International Operational Modal Analysis Conference (IOMAC 2007), Copenhagen, Danemark. External link
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2007, October). Multi-regressive model for structural output only modal analysis [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick. External link
Vu, V. H., Thomas, M., & Lakis, A. (2007, April). Le pont est-il fort? Réponse d'une technique d'analyse modale opérationnelle [Paper]. 42e Congrès de l'AQTR, défi transport durable, Montréal, Québec (17 pages). Unavailable
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2007, December). A time domain method for modal identification of vibratory signals [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Unavailable
Vu, V. H., Thomas, M., & Lakis, A. (2006, October). Operational modal analysis in time domain [Paper]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. External link
