 | Monter d'un niveau |
Ababou, Y., Desjardins, P., Masut, R. A., Yelon, A., & L'Espérance, G. (1996). Metalorganic vapor phase epitaxy and structural characterization of InP on Si(111). Canadian Journal of Physics, 74(1), S108-S111. Lien externe
Abadou, Y., Desjardins, P., Chennouf, A., Leonelli, R., Hetheringtin, A., Yelon, A., L'Espérance, G., & Masut, R. A. (1996). Structural and optical charact. of InP grown on Si(111) by metalorganic vapor phase epitaxy using thermal cycle growth. Journal of Applied Physics, 80(9), 499-505. Lien externe
Beaudoin, M., Bensaada, A., Leonelli, R., Desjardins, P., Masut, R. A., Isnard, L., Chennouf, A., & L'Espérance, G. (1996). Self-consistent determination of the band offsets in InAsₓP₁₋ₓ/InP strained layer quantum wells and the bowing parameter of bulk InAsₓP₁₋ₓ. Physical review. B, Condensed matter, 53(4), 1990-1996. Lien externe
Blais, C., L'Espérance, G., Baril, E., & Forget, C. (août 1996). Characterization of small inclusions: SEM vs TEM, or is it even worth considering SEM [Communication écrite]. Microscopy and microanalysis 1996, Minneapolis, MN (United States). Non disponible
Blandin, J. J., Hong, B., Varloteaux, A., Suery, M., & L'Espérance, G. (1996). Effect of the nature of grain boundary regions on cavitation of a superplastically deformed aluminium alloy. ACTA Materialia, 44(6), 2317-2326. Lien externe
Desjardins, P., Beaudoin, M., Leonelli, R., L'Espérance, G., & Masut, R. A. (1996). Structural and optical properties of strain-relaxed InAsP/InP heterostructures grown by metalorganic vapor phase epitaxy on InP(001) using tertiarybutylarsine. Journal of Applied Physics, 80(2), 846-852. Lien externe
Guillet, A., Es-Sadiqi, E., L'Espérance, G., & Hamel, F. G. (1996). Microstructure and mechanical properties of strip cast 1008 steel after simulated coiling and batch annealing, cold rolling. ISIJ International, 36(9), 1190-1198. Lien externe
Hajjaji, M., Cutler, L., & L'Espérance, G. (1996). Effects of lithium addition and wheel velocity on the microstructure of aluminium-lithium alloy ribbons. Journal of Materials Science, 31(4), 1027-1034. Lien externe
Hajjaji, M., Cutler, L., & L'Espérance, G. (1996). Phases in as-spun and aged binary aluminium-lithium ribbons. Journal of Materials Science, 31(14), 3715-3721. Lien externe
Imai, T., Kojima, S., L'Espérance, G., Hong, B. D., Jiang, D., & Nieh, T. G. (1996). Effects of temperature on the superplastic characteristics of a powder-metallurgy pure aluminum. Scripta Materialia, 35(10), 1189-1193. Lien externe
Imai, T., Kojima, S., Tochigi, I., L'Espérance, G., & Hong, B. (février 1997). High strain rate superplasticity of discontinuous fiber reinforced pure aluminum composites [Communication écrite]. Light weight alloys for aerospace applications IV : 4th symposium, Orlando, Fl, USA. Non disponible
Imai, T., Kojima, S., Tochigi, I., L'Espérance, G., Hong, B., & Jiang, D. (août 1996). High strain rate superplasticity of discontinuous fiber reinforced aluminum alloy composites [Communication écrite]. Processes in advanced materials and mechanics : International conference on advanced materials, Beijing, China. Non disponible
Imai, T., Tochigi, I., Ai, K., L'Espérance, G., & Hong, B. (1996). High-strain rate superplasticity of a beta-si3n4 whisker-reinforced pure aluminum composite made by squeeze casting. Scripta Materialia, 34(10), 1627-1631. Lien externe
L'Espérance, G., Dionne, M., & Tremblay, S. (août 1996). Extracting 3-D information from SEM and TEM images: Approaches and applications in the physical sciences [Communication écrite]. Microscopy and microanalysis 1996, Minneapolis, MN (United States). Non disponible
L'Espérance, G., Duchesne, E., & De Rege, A. (1996). Effect of materials and process parameters on microstructure and properties of sinter hardening alloys. Advances in powder metallurgy and particulate materials, 3(11), 397-413. Non disponible
L'Espérance, G., Martel, S., & De Rege, A. (juin 1996). Detailed microstructural characterization of recently developedpartically alloyed powders [Communication écrite]. Advances in Powder Metallurgy and Particulate Materials -1996 : 1996 World Congress on Powder Metallurgy & Particulate Materials, Washington, DC, USA. Non disponible
Lefebvre, L. P., L'Espérance, G., & Suery, M. Age-hardening behavior of al-1 wt-% mg/sic(ind p) composites fabricated with TiO₂-coated sic particles [Communication écrite]. Processing, properties, and applications of cast metal matrix composites: symposium held at the 1996 TMS Fall Meeting in Cincinnati, Ohio. Non disponible
Lefebvre, L. P., L'Espérance, G., & Suéry, M. (janvier 1996). Age-hardening behavior of Al-wt%/Mg/SiCo composites fabricated with TiO2 coated SiC particles [Communication écrite]. TMS fall meeting- Properties and applications of cast metal matrix composites, Cincinnati, USA. Non disponible
Simoneau, M., L'Espérance, G., & Schulz, R. (juillet 1995). Abnormal grain growth in sintered YBa₂Cu₃O₇₋[dₑₗₜₐ] nanocrystalline powders produced by high energy ball milling [Communication écrite]. International symposium on metastable, mechanically alloyed and nanocrystalline materials. Publié dans Materials Science Forum, 225-227(2). Lien externe
Tsunemichi, I., Sumito, K., L'Espérance, G., Bande, H., & Daming, J. (1996). Effect of volume fraction of aln particle on superplasticity of aln/6061 aluminum alloy composite. Scripta Materialia, 35(10), 1199-1204. Lien externe
Zayed, J., Mikhail, M., Loranger, S., Kennedy, G. G., & L'Espérance, G. (1996). Exposure of taxi drivers and office workers to total and respirable manganese in an urban-environment. American Industrial Hygiene Association Journal, 57(4), 376-380. Lien externe
Zhong, W. M., Goiffon, E., L'Espérance, G., Suery, M., & Blandin, J. J. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 1 : Dynamic recrystallization of the composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 84-92. Lien externe
Zhong, W. M., L'Espérance, G., & Suery, M. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 2 : Tensile properties at different temperatures. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 93-103. Lien externe
Zhong, W. M., L'Espérance, G., & Suery, M. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 3 : Fracture mechanisms of the composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 104-114. Lien externe
Zhong, W., L'Espérance, G., & Suéry, M. (1996). Interfacial reactions in Al-Mg(5083) SiCp composites during fabrication and remelting. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 26(10), 2637-2649. Lien externe
