 | Monter d'un niveau |
Abriat, C., Heuzey, M.-C., Virgilio, N., & Daigle, F. (juin 2018). Rheology of dual-species biofilms at the air-liquid interface [Affiche]. CREPEC Annual Student Colloquium, Montréal, Québec. Non disponible
Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2018). Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends. Applied Clay Science, 157, 65-75. Lien externe
Alsinani, N. A., & Laberge Lebel, L. (septembre 2018). Effect of length variation of flax/polypropylene pellets produced by multi-die pultrusion on the quality of injection molded product [Communication écrite]. 18th Annual Society for Plastics Engineers Automotive Composites Conference & Exhibition, Novi, Michigan. Lien externe
Ardila, N., Ajji, Z., Heuzey, M.-C., & Ajji, A. (2018). Chitosan electrospraying: Mapping of process stability and micro and nanoparticle formation. Journal of Aerosol Science, 126, 85-98. Lien externe
Arkoun, M., Ardila, N., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based structures/coatings with antibacterial properties. Dans Handbook of antimicrobial coatings (357-389). Lien externe
Arkoun, M., Daigle, F., Holley, R. A., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based nanofibers as bioactive meat packaging materials. Packaging Technology and Science, 31(4), 185-195. Lien externe
Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Cellular morphology optimization of polypropylene/CaCO₃ composite films designed for piezoelectric applications. Cellular Polymers, 37(3), 103-119. Lien externe
Beuguel, Q., Bagheriasl, D., Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Comportement rhéologique à l'état fondu de nanocomposites à base de nanocristaux de cellulose (CNCs). Rhéologie (34), 10-16. Disponible
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Rheological behavior of cellulose nanocrystal suspensions in polyethylene glycol. Journal of Rheology, 62(2), 607-618. Disponible
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water. Journal of Colloid and Interface Science, 516, 23-33. Disponible
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). Lien externe
Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. Lien externe
Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (2018). Enhancement of heat seal properties of polypropylene films by elastomer incorporation. International Polymer Processing, 33(3), 322-326. Lien externe
Bruel, C., Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). The apparent structural hydrophobicity of cellulose nanocrystals. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 13-23. Disponible
Castejon, P., Habibi, K., Saffar, A., Ajji, A., Martinez, A. B., & Arencon, D. (2018). Polypropylene-based porous membranes: Influence of polymer composition, extrusion draw ratio and uniaxial strain. Polymers, 10(1). Disponible
Causse, P., Ravey, C., & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2). Disponible
Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Effect of carbon nanotube on PA6/ECO composites: Morphology development, rheological, and thermal properties. Journal of Applied Polymer Science, 135(12), 9 pages. Lien externe
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (2018). Large-Scale Encapsulation of Magnetic Iron Oxide Nanoparticles via Syngas Photo-Initiated Chemical Vapor Deposition. Scientific Reports, 8(1). Disponible
Faucheux, P. A., Gosselin, F., & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, 135-144. Disponible
Gancheva, T., & Virgilio, N. (2018). Tailored Macroporous Hydrogels with Nanoparticles Display Enhanced and Tunable Catalytic Activity. ACS Applied Materials and Interfaces, 10(25), 21073-21078. Lien externe
Gazil, O., & Virgilio, N. (juin 2018). Controlling the localization of gold nanoparticles during synthesis in microstructured porous hydrogels [Affiche]. CREPEC Annual Student Colloquium, Montréal, Québec. Non disponible
Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends. Journal of Polymer Science, Part B: Polymer Physics, 56(7), 576-587. Lien externe
Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018). Simulation of Heat Transfer in Heat Sealing of Multilayer Polymeric Films: Effect of Process Parameters and Material Properties. Industrial & Engineering Chemistry Research, 57(43), 14571-14582. Lien externe
Madra, A., Breitkopf, P., Raghavan, B., & Trochu, F. (2018). Diffuse manifold learning of the geometry of woven reinforcements in composites. Comptes Rendus Mécanique, 346(7), 532-538. Lien externe
Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Effect of nanoclay localization on the peel performance of PE based blend nanocomposite sealants. Applied Clay Science, 152, 113-123. Lien externe
Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Peelable clay/PE nanocomposite seals with ultra-wide peelable heat seal temperature window. Applied Clay Science, 158, 132-142. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2018). Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties. Advances in Polymer Technology, 37(2), 468-483. Lien externe
Osman, M., Virgilio, N., Mighri, F., & Rouabhia, M. (décembre 2018). Development of functional biopolymer-based cartilage tissue [Affiche]. Annual CREPEC Colloquium, Montréal, Québec. Non disponible
Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs. Engineering Fracture Mechanics, 200, 251-262. Lien externe
Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Multiscale modeling of polymer systems comprising nanotube-like inclusions by considering interfacial debonding under plastic deformations. Composite Structures, 194, 302-315. Lien externe
Raphael, W., Martel, T., Landry, V., & Tavares, J. R. (2018). Surface engineering of wood substrates to impart barrier properties: a photochemical approach. Wood Science and Technology, 52(1), 193-207. Disponible
Rokbani, H., Daigle, F., & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3). Disponible
Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R., & Virgilio, N. (2018). Sodium alginate-grafted submicrometer particles display enhanced reversible aggregation/disaggregation properties. Carbohydrate Polymers, 194, 61-68. Disponible
Safdari, F., Bagheriasl, D., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2018). Rheological, mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites. Polymer Composites, 39(5), 1752-1762. Lien externe
Sahraeian, R., Esmizadeh, E., Esfandeh, M., Naderi, G., & Dubois, C. (2018). Hybrid effect of nanoperlite and nanoclay on mechanical and rheological properties of low-density polyethylene. Journal of Polymer & Composites, 6(1), 32-41. Lien externe
Wang, C.-S., Virgilio, N., Wood-Adams, P. M., & Heuzey, M.-C. (2018). Protein/polysaccharide-based hydrogels prepared by vapor-induced phase separation. Macromolecular Chemistry and Physics, 219(7), 1700504 (6 pages). Lien externe
Wang, H., Liu, Y., Chen, L., Li, X., Wang, J., & Xie, F. (2018). Insights into the multi-scale structure and digestibility of heat-moisture treated rice starch. Food Chemistry, 242(Supplement), 323-329. Lien externe
Wang, J., Tsou, A. H., & Favis, B. D. (2018). Effects of Polyethylene Molecular Weight Distribution on Phase Morphology Development in Poly(p-phenylene ether) and Polyethylene Blends. Macromolecules, 51(22), 9165-9176. Lien externe
Wang, J., Tsou, A. H., Passino, H. L., & Favis, B. D. (2018). PPE-g-HDPE in high-performance Poly(p-Phenylene Ether)/Polyethylene Blends: Synthesis and compatibilization effects. Polymer, 138, 92-102. Lien externe
Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. Lien externe
Zakeri, B., Khandal, D., Beuguel, Q., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Non-covalent surface modification of cellulose nanocrystals by polyethyleneimine. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 6-12. Disponible
Zolali, A. M., & Favis, B. D. (2018). Toughening of cocontinuous polylactide/polyethylene blends via an interfacially percolated intermediate phase. Macromolecules, 51(10), 3572-3581. Lien externe
