 | Monter d'un niveau |
Louis FradetteDépartement de génie chimique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Avazpour, R., Latifi, M., Chaouki, J., & Fradette, L. (2021). A cleaner recovery of rare earth bearing minerals by Pickering emulsification: Improvement of processing conditions toward an economic operation. Journal of Environmental Chemical Engineering, 9(4), 8 pages. Lien externe
Avazpour, R., Latifi, M., Chaouki, J., & Fradette, L. (2020). An environmentally friendly route for beneficiation of rare earth-bearing minerals by Pickering emulsification: adjusting the interfacial and formulation parameters. Green Chemistry, 22(17), 5771-5784. Lien externe
Avazpour, R., Latifi, M., Chaouki, J., & Fradette, L. (2019). Physical beneficiation of rare earth-bearing ores by Pickering emulsification. Minerals Engineering, 144, 15 pages. Lien externe
Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part I: Development of new key performance indicators (KPI). Chemical Engineering Research and Design, 115, 160-172. Lien externe
Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part II: Diagnostics and identification of improvement projects. Chemical Engineering Research and Design, 115, 107-115. Lien externe
Ajao, O., Rafione, T., Marinova, M., Legros, R., Fradette, L., & Paris, J. (octobre 2012). Opportunities for energy upgrading by means of an absoption heat pump in an integrated forest biorefinery [Communication écrite]. 4th Nordic Wood Biorefinery Conference, Helsinki, Finlande. Non disponible
Blais, B., Delacroix, B., Fradette, L., & Bertrand, F. (novembre 2020). A comparison of the performance of mixing systems for viscous solid-liquid mixing using CFD-DEM [Communication écrite]. AIChE Annual Meeting. Lien externe
Bertrand, O., Blais, B., Bertrand, F., & Fradette, L. (2018). Complementary methods for the determination of the just-suspended speed and suspension state in a viscous solid-liquid mixing system. Chemical Engineering Research and Design, 136, 32-40. Lien externe
Blais, B., Bertrand, O., Fradette, L., & Bertrand, F. (2017). CFD-DEM simulations of early turbulent solid–liquid mixing: Prediction of suspension curve and just-suspended speed. Chemical Engineering Research and Design, 123, 388-406. Disponible
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (2016). Development of an unresolved CFD–DEM model for the flow of viscous suspensions and its application to solid–liquid mixing. Journal of Computational Physics, 318, 201-221. Disponible
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (2016). A semi-implicit immersed boundary method and its application to viscous mixing. Computer & Chemical Engineering, 85, 136-146. Disponible
Bertrand, O., Blais, B., Bertrand, F., & Fradette, L. (octobre 2016). Development of Pressure Based Methods for the Determination of the Just-Suspended Speed and Suspension State in Viscous Solid-Liquid Mixing [Communication écrite]. Canadian Society for Chemical Engineering (CSChE) Annual Meeting, Québec, Québec. Non disponible
Bertrand, O., Blais, B., Fradette, L., & Bertrand, F. (juin 2016). Development of Pressure Based Methods for the Determination of the Just-Suspended Speed and Suspension State in Viscous Solid-Liquid Mixing [Communication écrite]. Mixing XXV, Québec, Québec. Non disponible
Blais, B., Bertrand, O., Lassaigne, M., Fradette, L., & Bertrand, F. (juin 2016). Understanding Solid-Liquid Mixing Through the Development of a Novel CFD-DEM Model [Communication écrite]. North American Mixing Forum (Mixing XXV), Québec, Québec. Lien externe
Bertrand, F., Blais, B., Lassaigne, M., Fradette, L., & Goniva, C. (novembre 2015). A CFD-DEM Model for Viscous Solid-Liquid Mixing in Stirred Tanks [Communication écrite]. AIChE Annual Meeting, Salt Lake City, Utah. Lien externe
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (septembre 2015). Design and Validation of a Robust CFD-DEM Model for the Investigation of Viscous Solid-Liquid Mixing in Agitated Vessels [Communication écrite]. 4th Conference on Particle-Based Methods (PARTICLES 2015), Barcelona, Spain. Lien externe
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (juin 2015). Investigation of Viscous Solid-Liquid Mixing in Agitated Vessels Using CFD-DEM: Model Formulation and Experimental Validation [Communication écrite]. 10th OpenFOAM Workshop, Ann Arbor, Michigan. Non disponible
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (septembre 2015). A Robust and Efficient CFD-DEM Model for the Investigation of Viscous Solid-Liquid Mixing in Stirred Tanks [Communication écrite]. 10th European Congress on Chemical Engineering (ECCE 2015), Nice, France. Non disponible
Blais, B., Lassaigne, M., Fradette, L., & Bertrand, F. (novembre 2014). Multiscale CFD-DEM Modeling of the Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks [Communication écrite]. 14th AIChE Annual Meeting, Atlanta, USA. Lien externe
Blais, B., Lassaigne, M., Fradette, L., & Bertrand, F. (octobre 2014). Robust Modeling of Viscous Solid-Liquid Mixing in Stirred Tanks via a Euler-Lagrange Approach [Communication écrite]. 15th Workshop on Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargèse, Corsica, France. Non disponible
Brito-Bazan, M., Fradette, L., & Tanguy, P. A. (2012). Experimental flow visualization and residence time distributions in a Co-Kneader. International Polymer Processing, 27(4), 414-426. Lien externe
Bagué, A., Heniche, M., Fradette, L., Tanguy, P. A., & Takenaka, K. (septembre 2011). Effect of speed ratio on power consumption in a superblend miser - a numerical study [Communication écrite]. ISMIP VII, Beijing, China. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2011). A model for analysis and design of H2O-LiBr absorption heat pumps. Energy Conversion and Management, 52(2), 1439-1448. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2010). Opportunities for the integration of absorption heat pumps in the pulp and paper process. Energy, 35(12), 4600-4606. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (2010). Retrofit of Absorption Heat Pumps Into Manufacturing Processes: Implementation Guidelines. Canadian Journal of Chemical Engineering, 88(5), 839-848. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (mai 2010). Simulation et étude expérimentale d'une pompe à chaleur à absorption de type LiBr-H₂O [Communication écrite]. Congrès français de thermique, Touquet. Lien externe
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (août 2009). Application of absorption heat pumps in the pulp and paper industry [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Irlande. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (août 2009). Opportunities for the integration of absorption heat pumps in the pulp and paper process [Communication écrite]. 3rd International Conference on Sustainable Energy & Environmental Protection, Dublin, Ireland. Non disponible
Bakhtiari, B., Fradette, L., Legros, R., & Paris, J. (mai 2009). Une méthodologie systématique d'implantation de pompes à chaleur à absorption dans les procédés : Études de cas [Communication écrite]. IXe Colloque Interuniversitaire Franco-québécois sur la thermique des systèmes, Lille, France. Non disponible
Bonnot, S., Cabaret, F., Fradette, L., & Tanguy, P. A. (2007). Characterization of Mixing Patterns in a Coaxial Mixer. Chemical Engineering Research & Design, 85(A8), 1129-1135. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (2008). Effect of shaft eccentricity on the laminar mixing performance of a radial impeller. Canadian Journal of Chemical Engineering, 86(6), 971-977. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (2008). Gas-Liquid Mass Transfer in Unbaffled Dual-Impeller Mixers. Chemical Engineering Science, 63(6), 1636-1647. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (2008). New turbine impellers for viscous mixing. Chemical Engineering and Technology, 31(12), 1806-1815. Lien externe
Cabaret, F., Rivera, C., Fradette, L., Heniche, M., & Tanguy, P. A. (2007). Hydrodynamics Performance of a Dual Shaft Mixer With Viscous Newtonian Liquids. Chemical Engineering Research & Design, 85(A5), 583-590. Lien externe
Cabaret, F., Bonnot, S., Fradette, L., & Tanguy, P. A. (2007). Mixing time analysis using colorimetric methods and image processing. Industrial and Engineering Chemistry Research, 46(14), 5032-5042. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (juin 2023). Characterization of macro-mixing kinetics using advanced image analysis [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Cabaret, F., Rivera, C. A., Heniche, M., Fradette, L., & Tanguy, P. A. (juin 2023). Mixing performance of dual eccentric turbines in stirred tanks [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Cabaret, F., Rivera, C. A., Heniche, M., Fradette, L., & Tanguy, P. A. (juin 2023). Performance of Dual Shaft Mixing System in Viscous Newtonian Liquids Mixing [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Delacroix, B., Fradette, L., Bertrand, F., & Blais, B. (2021). Which impeller should be chosen for efficientsolid–liquid mixing in the laminar and transitional regime? AIChE Journal, 67(11). Disponible
Delacroix, B., Rastoueix, J., Fradette, L., Bertrand, F., & Blais, B. (2021). CFD-DEM simulations of solid-liquid flow in stirred tanks using a non-inertial frame of reference. Chemical Engineering Science, 230. Disponible
Delacroix, B., Bouarab, A., Fradette, L., Bertrand, F., & Blais, B. (2020). Simulation of granular flow in a rotating frame of reference using the discrete element method. Powder Technology, 369, 146-161. Disponible
Delacroix, B., Blais, B., Fradette, L., & Bertrand, F. (novembre 2019). Development of a CFD-DEM model in a non-inertial frame for solid-liquid mixing applications [Communication écrite]. 2019 AIChe Annual Meeting, Orlando, FL, USA. Non disponible
Delacroix, B., Blais, B., Fradette, L., & Bertrand, F. (juin 2019). Development of a CFDDEM model in non-inertial frame for solid-liquid mixing applications [Communication écrite]. 2019 Joint Congress of the CSME and the CFDSC, London, ON, Canada. Non disponible
Douïeb, S., Archambault, S., Fradette, L., Bertrand, F., & Haut, B. (2017). Effect of the fluid shear rate on the induction time of CO₂-THF hydrate formation. Canadian Journal of Chemical Engineering, 95(1), 187-198. Lien externe
Douïeb, S., Fradette, L., Bertrand, F., & Haut, B. (2015). Impact of the fluid flow conditions on the formation rate of carbon dioxide hydrates in a semi-batch stirred tank reactor. AICHE Journal, 61(12), 4387-4401. Lien externe
Douieb, S., Fradette, L., Bertrand, F., & Haut, B. (juin 2014). Impact of Agitation on the Growth Rate of CO2 Gas Hydrates in a Semi-Batch Stirred Tank Reactor [Communication écrite]. Mixing XXIV Conference, Lake George, NY, USA. Non disponible
Douieb, S., Fradette, L., & Bertrand, F. (octobre 2013). Impeller geometry effect on the growth rate of CO₂ gas hydrates in agitated vessels [Communication écrite]. 63rd CSChE Annual Conference, Fredericton, NB, Canada. Non disponible
Douieb, S., Fradette, L., Bertrand, F., & Haut, B. (août 2013). Impeller geometry effect on the growth rate of CO₂ gas hydrates in agitated vessels [Communication écrite]. 9th world Congress of Chemical Engineering (WEEC9), Seoul, Korea. Non disponible
Fontaine, A., Guntzburger, Y., Bertrand, F., Fradette, L., & Heuzey, M.-C. (2013). Experimental investigation of the flow dynamics of rheologically complex fluids in a maxblend impeller system using PIV. Chemical Engineering Research and Design, 91(1), 7-17. Lien externe
Fradette, L., & Bertrand, F. (2013). Reply to Comments on 'an Experimental Method to Evaluate Global Pumping in a Mixing System: Application to the Maxblendtm for Newtonian and Non-Newtonians Fluids' [Commentaire ou lettre]. Chemical Engineering Journal, 229, 597-597. Lien externe
Fontaine, A., Guntzburger, Y., Bertrand, F., Fradette, L., Heuzey, M.-C., & Yatomi, R. (juin 2012). Experimental investigation of the flow dynamics of rheologically complex fluids in a maxblend impeller system [Communication écrite]. Mixing XXIII Conference, Mayan Riviera, Mexico. Non disponible
Fontaine, A., Guntzburger, Y., Bertrand, F., & Fradette, L. (juin 2010). Effect of rheology on the performance of Maxblend™ and superblend™ mixers [Communication écrite]. Mixing XXII Conference, Victoria, Canada. Non disponible
Fournier, C.-O., Fradette, L., & Tanguy, P. A. (avril 2009). Effect of dispersed phase viscosity on solid-stabilized emulsions [Communication écrite]. 13th European Conference on Mixing : New developments towards more efficient and sustainable operations, King's College London, UK. Publié dans Chemical Engineering Research and Design, 87(4). Lien externe
Farhat, M., Fradette, L., Horiguchi, H., Yatomi, R., & Tanguy, P. A. (2009). Experimental investigation of superblend coaxial mixer. Journal of Chemical Engineering of Japan, 42(11), 797-803. Lien externe
Farhat, M., Fradette, L., & Tanguy, P. A. (2008). Revisiting the Performance of a Coaxial Mixer. Industrial & Engineering Chemistry Research, 47(10), 3562-3567. Lien externe
Fradette, L., & Tanguy, P. A. (2007). Accent on applications - Measuring and imporving mixing times with image analysis. Optical techniques gauge champagne bubble stability. Studying engines in action. Photonics Spectra, 41(8), 28-32. Non disponible
Fradette, L., Tanguy, P. A., Bertrand, F., Thibault, F., Ritz, J.-B., & Giraud, É. (2007). CFD Phenomenological Model of Solid-Liquid Mixing in Stirred Vessels. Computers & Chemical Engineering, 31(4), 334-345. Lien externe
Fradette, L., Brocart, B., & Tanguy, P. A. (2007). Comparison of mixing technologies for the production of concentrated emulsions. Chemical Engineering Research & Design, 85(A11), 1553-1560. Lien externe
Fradette, L., Tanguy, P. A., Li, H. Z., & Choplin, L. (2007). Liquid/Liquid Viscous Dispersions With a SMX Static Mixer. Chemical Engineering Research & Design, 85(A3), 395-405. Lien externe
Farhat, M., Rivera Aparicio, C. A., Fradette, L., Heniche, M., & Tanguy, P. A. (2007). Numerical and Experimental Study of a Dual-Shaft Coaxial Mixer With Viscous Fluids. Industrial & Engineering Chemistry Research, 46(14), 5021-5031. Lien externe
Fradette, L., Thomé, G., Tanguy, P. A., & Takenaka, K. (2007). Power and Mixing Time Study Involving a Maxblend (R) Impeller With Viscous Newtonian and Non-Newtonian Fluids. Chemical Engineering Research & Design, 85(A11), 1514-1523. Lien externe
Fradette, L., Li, H. Z., Choplin, L., & Tanguy, P. A. (2006). Gas/Liquid Dispersions With a Smx Static Mixer in the Laminar Regime. Chemical Engineering Science, 61(11), 3506-3518. Lien externe
Farhat, M., Rivera, C. A., Fradette, L., Heniche, M., & Tanguy, P. A. (juin 2023). Numerical and experimental study of coaxial mixers for viscous Newtonian and non-Newtonian fluids [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Fradette, L. (1999). Étude de dispersion dans un mélangeur statique Sulzer SMX [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Fradette, L., Li, H. Z., Choplin, L., & Tanguy, P. A. (1998). 3D Finite Element Simulation of Fluid Flow Through a Smx Static Mixer. Computers & Chemical Engineering, 22, S759-S761. Lien externe
Fradette, L., Fasol, C., Li, H. Z., Choplin, L., & Tanguy, P. A. (septembre 1997). Efficacité de dispersion gaz-liquide dans un mélangeur statique Sulzer SMX [Communication écrite]. 6e Congrès français de génie des procédés: Nouvelles frontières du génie des procédés, Paris, France. Publié dans Récents progrès en génie des procédés, 11(55). Non disponible
Fradette, L., Tanguy, P. A., Hurez, P., & Blouin, D. (1996). On the determination of heat-transfer coefficient between pvc and steel in vacuum extrusion calibrators. International Journal of Numerical Methods for Heat & Fluid Flow, 6(1), 3-12. Lien externe
Fradette, L., Tanguy, P. A., Thibault, F., Sheehy, P., Blouin, D., & Hurez, P. (1995). Optimal-design in profile extrusion calibration. Journal of Polymer Engineering, 14(4), 295-322. Lien externe
Guntzburger, Y., Fontaine, A., Fradette, L., & Bertrand, F. (2013). An experimental method to evaluate global pumping in a mixing system : application to the Maxblendᵗᵐ for newtonian and non-newtonian fluids. Chemical Engineering Journal, 214(1), 394-406. Lien externe
Guntzburger, Y., Fontaine, A., Bertrand, F., Fradette, L., & Yatomi, R. (octobre 2012). Global pumping efficiency and flow dynamics of a maxblend impeller system with newtonian and non-newtonian fluids [Communication écrite]. 62nd CSChE Annual Conference, Vancouver, BC, Canada. Non disponible
Giguère, R., Fradette, L., Mignon, D., & Tanguy, P. A. (2009). Analysis of slurry flow regimes downstream of a pipe bend. Chemical Engineering Research and Design, 87(7), 943-950. Lien externe
Guntzburger, Y., Fradette, L., Farhat, M., Heniche, M., Tanguy, P. A., & Takenaka, K. (2009). Effect of the geometry on the performance of the Maxblend impeller with viscous Newtonian fluids. Asia-Pacific Journal of Chemical Engineering, 4(5), 528-536. Lien externe
Giguère, R., Fradette, L., Mignon, D., & Tanguy, P. A. (2008). Characterization of Slurry Flow Regime Transitions by ERT. Chemical Engineering Research & Design, 86(9A), 989-996. Lien externe
Giguère, R., Fradette, L., Mignon, D., & Tanguy, P. A. (2008). ERT Algorithms for Quantitative Concentration Measurement of Multiphase Flows. Chemical Engineering Journal, 141(1-3), 305-317. Lien externe
Gingras, J.-P., Fradette, L., Tanguy, P. A., & Jorda, E. (2007). Concentrated Bitumen-in-Water Emulsification in Coaxial Mixers. Industrial & Engineering Chemistry Research, 46(6), 1818-1825. Lien externe
Gingras, J.-P., Fradette, L., Tanguy, P. A., & Bousquet, J. (2007). Inline Bitumen Emulsification Using Static Mixers. Industrial & Engineering Chemistry Research, 46(8), 2618-2627. Lien externe
Iranshahi, A., Devals, C., Heniche, M., Fradette, L., Tanguy, P. A., & Takenaka, K. (2007). Hydrodynamics Characterization of the Maxblend Impeller. Chemical Engineering Science, 62(14), 3641-3653. Lien externe
Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2016). Effect of mixing hydrodynamics on the particle and filtration properties of precipitated lignin. Chemical Engineering Research and Design, 105, 94-106. Lien externe
Kannangara, M., Liebich, C., Marinova, M., Fradette, L., & Paris, J. (octobre 2012). Impact of lignin extraction on the recovery loop of the Kraft process : measures to minimize the consumption of chemicals [Communication écrite]. 4th Nordic Wood Biorefinery Conference, Helsinki, Finlande. Lien externe
Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2012). Lignin recovery by acid precipitation in a kraft mill: an energy perspective. J-FOR Journal of Science & Technology for Forest Products and Processes, 2(4), 28-32. Non disponible
Khopkar, A. R., Fradette, L., & Tanguy, P. A. (2009). Emulsification capability of a dual shaft mixer. Chemical Engineering Research and Design, 87(12), 1631-1639. Lien externe
Khopkar, A. R., Fradette, L., & Tanguy, P. A. (2007). Hydrodynamics of a Dual Shaft Mixer With Newtonian and Non-Newtonian Fluids. Chemical Engineering Research & Design, 85(A6), 863-871. Lien externe
Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (2020). Validation of the pressure drop-flow rate relationship predicted by lattice Boltzmann simulations for immiscible liquid-liquid flows through SMX static mixers. Chemical Engineering Research and Design, 153, 350-368. Lien externe
Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (juin 2018). Lattice Boltzmann modeling of immiscible liquid-liquid flows in static mixers [Communication écrite]. North American Mixing Forum (Mixing XXVI), San Juan, Puerto Rico. Non disponible
Lassaigne, M., Blais, B., Fradette, L., & Bertrand, F. (2016). Experimental investigation of the mixing of viscous liquids and non-dilute concentrations of particles in a stirred tank. Chemical Engineering Research and Design, 108, 55-68. Lien externe
Lassaigne, M., Blais, B., Ayranci, I., Fradette, L., & Bertrand, F. (juin 2014). Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks [Communication écrite]. Mixing XXIV Conference, Lake George, NY, USA. Non disponible
Lassaigne, M., Blais, B., Ayranci, I., Bertrand, F., & Fradette, L. (octobre 2014). Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks [Communication écrite]. 64th CSChE Annual Meeting, Niagara Falls, Ontario, Canada. Non disponible
Méndez-Portillo, L. S., Fradette, L., Dubois, C., & Tanguy, P. A. (2012). Characterization of the hydrodynamics and mixing performance of a split-and-recombination (SAR) prototype microreactor and a multilamination commercial microreactor. Industrial and Engineering Chemistry Research, 51(2), 994-1005. Lien externe
Mosser, P. A., Heniche, M., & Fradette, L. (octobre 2012). Experimental modelling of the free surface in an unbaffled tank with a newtonian fluid [Communication écrite]. 12th AICHE Annual Meeting, Pittsburgh, PA, USA. Lien externe
Mateos-Espejel, E., Marinova, M., Diamantis, D., Fradette, L., & Paris, J. (juillet 2008). Strategy for converting a conventional kraft pulp mill into sustainable green mill [Communication écrite]. World Renewable Energy Congress X, Glasgow, Scotland. Non disponible
Okoro, O., Solliec, M., Papineau, I., Fradette, L., & Barbeau, B. (2021). Contribution of surfactants and micelles to contamination and treatability of crude oil-contaminated surface water. Journal of Environmental Chemical Engineering, 9(6), 8 pages. Lien externe
Okoro, O., Papineau, I., Solliec, M., Fradette, L., & Barbeau, B. (2021). Performance of conventional drinking water treatment following dispersant remediation of an oil spill in surface water. Science of The Total Environment, 801, 9 pages. Lien externe
Okoro, O., Lompe, K., Papineau, I., Solliec, M., Fradette, L., & Barbeau, B. (2021). Simultaneous powdered activated carbon and coagulant injection during ballasted flocculation for trace benzene removal from diesel and gasoline-contaminated surface waters. Journal of Water Process Engineering, 40, 101846 (10 pages). Lien externe
Okoro, O., Lompe, K., Papineau, I., Fradette, L., & Barbeau, B. (novembre 2019). Oil spill and conventional WTPs : emergency treatment measures for drinking water production [Communication écrite]. Water Quality Technology Conference (WQTC 2019), Dallas, Texas, USA. Non disponible
Poh, J., Heniche, M., Fradette, L., Cunningham, M., & McKenna, T. (2011). Computational analysis of mixing and scale-up in emulsion polymerization reactors. Macromolecular Symposia, 302(1), 133-141. Lien externe
Pohn, J., Heniche, M., Fradette, L., Cunningham, M., & McKenna, T. (2010). Development of a computational framework to model the scale-up of high-solid-content polymer latex reactors. Chemical Engineering & Technology, 33(11), 1917-1930. Lien externe
Pour, S. B., Fradette, L., & Tanguy, P. A. (2007). Laminar and Slurry Blending Characteristics of a Dual Shaft Impeller System. Chemical Engineering Research & Design, 85(A9), 1305-1313. Lien externe
Pour, S. B., Norca, G. B., Fradette, L., Legros, R., & Tanguy, P. A. (2007). Solid-liquid and liquid-liquid mixing laboratory for chemical engineering undergraduates. Chemical Engineering Education, 41(2), 101-106. Lien externe
Quirion-Blais, O., Marinova, M., Mateos Espejel, E., Trépanier, M., Fradette, L., Legros, R., & Paris, J. (mars 2009). Forest biorefinery-based eco-industrial clusters in canada : the energy challenge [Communication écrite]. POLYCITY General Meeting, Barcelone, Espagne. Non disponible
Reyjal, M., Tavares, J. R., Virgilio, N., & Fradette, L. (2013). Is the Maxwell–Garnett continuum model valid to predict the thermal conductivity of particle-stabilized (Pickering) emulsions? Industrial & Engineering Chemistry Research, 52(13), 4962-4966. Disponible
Saghaei, M., Fotsing, E. R., Ross, A., & Fradette, L. (2024). Production of monodisperse large drop emulsions by means of high internal phase pickering emulsions ─ processing and formulation. Industrial & Engineering Chemistry Research, 63(42), 17917-17929. Disponible
Sabri, F., Raphael, W., Berthomier, K., Fradette, L., Tavares, J. R., & Virgilio, N. (2020). One-step processing of highly viscous multiple Pickering emulsions. Journal of Colloid and Interface Science, 560, 536-545. Disponible
Sabri, F., Berthomier, K., Wang, C., Fradette, L., Tavares, J. R., & Virgilio, N. (2019). Tuning particle–particle interactions to control Pickering emulsions constituents separation. Green Chemistry, 21(5), 1065-1074. Disponible
Sabri, F., Berthomier, K., Fradette, L., Tavares, J. R., & Virgilio, N. (mai 2018). Improving the separation of Pickering emulsion constituents by using alginate-grafted particles [Affiche]. 16th Conference of the International Association of Colloid and Interface Scientists, Rotterdam, Pays-Bas. Non disponible
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (janvier 2018). Improving the separation of Pickering emulsion constituents by using alginate-grafted particles [Présentation]. Dans Polytechnique/McGill Chemical Engineering Research Day, Montréal, Québec. Non disponible
Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R., & Virgilio, N. (2018). Sodium alginate-grafted submicrometer particles display enhanced reversible aggregation/disaggregation properties. Carbohydrate Polymers, 194, 61-68. Disponible
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (mars 2016). Design and characterization of surface modified microparticles with stimuli-sensitive and reversible aggregation/disaggregation behavior [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Lien externe
Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R., & Virgilio, N. (octobre 2016). Design and characterization of surface modified silica nanoparticles with stimuli-sensitive and reversible aggregation/disaggregation behavior [Présentation]. Dans 66th Canadian Chemical Engineering Conference, Québec, Québec. Non disponible
Sabri, F., Drevelle, O., Fradette, L., Tavares, J. R., & Virgilio, N. (mars 2016). Processing of magnetic solid stabilized emulsions [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Non disponible
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (octobre 2014). Processing of highly viscous solid-stabilized emulsions [Présentation]. Dans 64th Canadian Chemical Engineering Conference, Niagara Falls, Canada. Non disponible
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (octobre 2014). Processing of solid stabilized emulsions [Communication écrite]. 64th Canadian Chemical Engineering Conference, Niagara Falls, Ontario. Non disponible
Stobiac, V., Fradette, L., Tanguy, P. A., & Bertrand, F. (2014). Pumping characterisation of the maxblend impeller for Newtonian and strongly non-Newtonian fluids. Canadian Journal of Chemical Engineering, 92(4), 729-741. Lien externe
Tsabet, È., & Fradette, L. (2016). Study of the properties of oil, particles, and water on particle adsorption dynamics at an oil/water interface using the colloidal probe technique. Chemical Engineering Research and Design, 109, 307-316. Lien externe
Tsabet, È., & Fradette, L. (2015). Effect of processing parameters on the production of Pickering emulsions. Industrial and Engineering Chemistry Research, 54(7), 2227-2236. Lien externe
Tsabet, È., & Fradette, L. (2015). Effect of the properties of oil, particles, and water on the production of Pickering emulsions. Chemical Engineering Research and Design, 97, 9-17. Lien externe
Tsabet, È., & Fradette, L. (2015). Semiempirical Approach for Predicting the Mean Size of Solid-Stabilized Emulsions. Industrial & Engineering Chemistry Research, 54(46), 11661-11677. Lien externe
Tanguy, P. A., Farhat, M., Fradette, L., Horiguchi, H., & Yatomi, R. (octobre 2008). Experimental investigation of the superblend coaxial mixer [Communication écrite]. 2nd Asian Conference on Mixing, Yonezawa, Japan. Non disponible
Tanguy, P. A., Heniche, M., Fradette, L., & Jaffar, S. A. (2008). Simulation of static mixers. Dans Mixing and compounding of polymers (2e éd.). Lien externe
Tanguy, P. A., Fradette, L., & Fournier, C.-O. (2008). Stable emulsion and process of preparation thereof. (Demande de brevet no US20080249194). Lien externe
Wan, B., Tsabet, È., & Fradette, L. (2019). The impact of particles on breakage and coalescence processes during the preparation of solid-stabilized emulsions. Industrial & Engineering Chemistry Research, 58(14), 5631-5639. Lien externe
Wan, B., & Fradette, L. (2017). Phase Inversion of a Solid-Stabilized Emulsion: Effect of Particle Concentration. Canadian Journal of Chemical Engineering, 95(10), 1925-1933. Lien externe
Wang, X., Farhat, M., Fradette, L., & Tanguy, P. A. (2014). Analysis of power consumption in multishaft mixers. Industrial and Engineering Chemistry Research, 53(16), 6730-6737. Lien externe
Wang, X., Fradette, L., Takenaka, K., & Tanguy, P. A. (2012). Effect of operating parameters on the mixing performance of the superblend coaxial mixer. Industrial and Engineering Chemistry Research, 51(4), 1826-1833. Lien externe
