<  Back to the Polytechnique Montréal portal

Items where Author is "Derenne, Michel"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Publication Date | Document subtype | No Grouping
Number of items: 50.

Article

Brown, W., Marchand, L., & Derenne, M. (2006). Optimised/harmonised room temperature leakage test procedure for generation of asme & cen code gasket factors - analytical phase. Welding Research Council Bulletin, 508, 84-84. External link

Sakr, O., Bougid, A., & Derenne, M. (2003). Correlation between PPMV and mass leakage rate of gasketing products. Welding Research Council Bulletin (484), 1-11. Unavailable

Arghavani, J., Derenne, M., & Marchand, L. (2003). Effect of Surface Characteristics on Compressive Stress and Leakage Rate in Gasketed Flanged Joints. International Journal of Advanced Manufacturing Technology, 21(10-11), 713-732. External link

Derenne, M., Marchand, L., & Muggo, U. (2003). Exploratory investigation of joint working conditions on the elevated temperature behaviour of metal reinforced flexible graphite sheet materials. Welding Research Council Bulletin (484), 23-38. Unavailable

Bougid, A., Derenne, M., & Marchand, L. (2003). Long duration mechanical performance of PTFE based gasket materials. Welding Research Council Bulletin (484), 12-22. Unavailable

Bouzid, A. H., & Derenne, M. (2002). Analytical Modeling of the Contact Stress With Nonlinear Gaskets. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 47-53. External link

Marchand, L., Derenne, M., & Bouzid, H. (2002). Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads. Welding Research Council Bulletin, 473. Unavailable

Arghavani, J., Derenne, M., & Marchand, L. (2002). Prediction of gasket leakage rate and sealing performance through fuzzy logic. International Journal of Advanced Manufacturing Technology, 20(8), 612-620. External link

Arghavani, J., Derenne, M., & Marchand, L. (2001). Fuzzy Logic Application in Gasket Selection and Sealing Performance. International Journal of Advanced Manufacturing Technology, 18(1), 67-78. External link

Arghavani, J., Derenne, M., & Marchand, L. (2001). Sealing Performance of Gasketed Bolted Flanged Joints: a Fuzzy Decision Support System Approach. International Journal of Advanced Manufacturing Technology, 17(1), 2-10. External link

Bouzid, A. H., Derenne, M., Marchand, L., & Payne, J. R. (2001). Service Temperature Characterization of Polytetrafluoroethylene-Based Gaskets. Journal of testing and evaluation, 29(5), 442-452. External link

Mameri, N., Piron, D.-L., Bouzid, A., Derenne, M., Marchand, L., & Birembaut, Y. (2000). Corrosion Quantification Test for Flanges With Graphite-Based Gaskets. Materials Performance, 39(4), 64-69. Unavailable

Marchand, L., Laviolette, D., & Derenne, M. (2000). NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads. Welding Research Council Bulletin (450), 1-20. Unavailable

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (1999). Effect of sealed joints tightness on steels corrosion: Development of novel technology. Environmental degradation of materials and corrosion control in metals, 287-299. Unavailable

Derenne, M., Marchand, L., & PAyne, J. R. (1999). Polytetrafuoroetylene (PTFE) gasket qualification. Welding Research Council Bulletin, 442, 1-65. Unavailable

Marchand, L., Derenne, M., & Payne, J. R. (1998). Summary of gasket steam leakage tests. Welding Research Council Bulletin, 431, 1-46. Unavailable

Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (1997). Elevated temperature characterization of flexible graphite sheet materials for bolted flanged joints. Welding Research Council Bulletin, 419, 1-88. Unavailable

Derenne, M., Marchand, L., & Deshaies, F. (1997). Leakage and emission characteristics of sheet gaskets. Welding Research Council Bulletin, 427, 1-61. Unavailable

Derenne, M., Marchand, L., Bazergui, A., & Payne, J. R. (1994). Elevated temperature testing of gaskets for bolted flanged connections. Welding Research Council Bulletin, 391, 1-37. Unavailable

Derenne, M., Bazergui, A., & Payne, J. R. (1989). Estimating Elevated Temperature Gasket Performance with ATRS Tests. SAE technical paper series, 1. External link

Paper

Diany, M., Bouzid, A.-H., & Derenne, M. (2005, July). On the Validity and Limits of the Gasket Effective Width Concept [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, Colorado, USA. External link

Marchand, L., Derenne, M., & Masi, V. (2005, July). Predicting gasket leak rates using a laminar-molecular flow model [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO. External link

Bouzid, A.-H., Diany, M., & Derenne, M. (2004, July). Determination of Gasket Effective Width Based on Leakage [Paper]. ASME/JSME Pressure Vessels and Piping Conference (PVP 2004), San Diego, CA, USA. External link

Brown, W., Derenne, M., & Bouzid, A.-H. (2002, August). Determination of Gasket Stress Levels During Thermal Transients [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2002), Vancouver, BC, Canada. External link

Allam, M. A., Bazergui, A., Marchand, L., & Derenne, M. (2002, June). Tube-to-tubesheet joints: maximum tensile stress and contact pressure due to thermal loading and temperature cycling [Paper]. ASME international joint power generation conference-IJPGC 2002, Scottsdale, Arizona, USA. External link

Brown, W., Derenne, M., & Bouzid, A. (2001, July). Determination of gasket stress levels during high temperature flange operation [Paper]. ASME/PVP Conference, Atlanta, GA, USA. Unavailable

Sakr, O., Bouzid, H., Derenne, M., & Marchand, L. (2000, January). Correlation between PPMV and mass leakage rate of gasketing products [Paper]. 9th international conference on pressure vessel technology ICPVT-9, Sydney, Australia. Unavailable

Derenne, M., Marchand, L., & Bouzid, H. (2000, January). Long term elevated temperature performance of metal reinforced flexible graphite sheet gaskets [Paper]. 9th international conference on pressure vessel technoogy ICPVT-9, Sydney, Australia. Unavailable

Bouzid, H., Derenne, M., & Marchand, L. (2000, January). Preventing PTFE gasket blow-out [Paper]. 9th international conference on pressure vessel technoogy ICPVT-9, Sydney, Australia. Unavailable

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., & Bouzid, A. (1999, January). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Paper]. 38th Canadian Conference of Metallurgists, Québec, Québec. Unavailable

Mameri, N., Piron, D.-L., Derenne, M., & Marchand, L. (1999, August). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Paper]. 1st International Symposium on Environmental Degradation of Materials and Corrosion Control In Metals (EDMCCM 1999), Québec, Québec. Unavailable

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (1999, August). Influence the sealing of joints on the corrosion of steels. Development of new equipment [Paper]. international symposium on environmental degradation of materials and corrosion control in metals - 38. annual conference of metallurgists of CIM. Gateway to the 21st Century, Québec City, QB. Unavailable

Hollinger, G. L., Hsu, K. H., Payne, J. R., Derenne, M., Bouzid, H., Marchand, L., Mueller, R., Waterland, J., & Winter, R. (1999, January). Look at today's gasket evaluation technology [Paper]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Unavailable

Mameri, N., Bouzid, H., Derenne, M., Marchand, L., & Piron, D. L. (1999, January). Quantification of corrosion in bolted gasketed joints [Paper]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Unavailable

Bouzid, A.-H., & Derenne, M. (1999, August). Simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets [Paper]. ASME Pressure Vessels and Piping Conference, Boston, MA. Published in Analysis of Bolted Joints, 382. Unavailable

Masi, V., Bouzid, A.-H., & Derenne, M. (1998, July). Correlation between gases and mass leak rate of gasketing materials [Paper]. Analysis of bolted joints, 1998: presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, USA. Unavailable

Derenne, M., Payne, J. R., Bouzid, A., & Marchand, L. (1998, January). Proposed modifications to draft 9 of the standard test method for gasket constants for bolted joint design [Paper]. Fluid sealing association symposium, Nashville, TN. Unavailable

Bouzid, A.-H., Derenne, M., & Chaarani, A. (1998, July). Tightness prediction of bolted flanged connections subjected to external bending moments [Paper]. Analysis of bolted joints, 1998: presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, USA. Unavailable

Bouzid, A., & Derenne, M. (1997, July). Distribution of the gasket contact stress in bolted flanged connections [Paper]. 1997 ASME Pressure Vessels and Piping Conference, Orlando, FL, USA. Unavailable

Derenne, M., Marchand, L., & Payne, J. R. (1996, July). Characterization behaviour of flexible graphite sheet gasket materials [Paper]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Unavailable

Derenne, M., Marchand, L., & Payne, J. R. (1996, January). Characterization of the hot relaxation and gross leakage resistance behaviour of PTFE based gasket material [Paper]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Unavailable

Marchand, L., Laviolette, D., Derenne, M., Birembaut, Y., & Ledauphin, T. (1996, January). Characterization of two different NPS bolted flanged joints subjected to external bending moments [Paper]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Unavailable

Derenne, M., Payne, J. R., & Marchand, L. (1996, January). Development of test procedures for fire resistance qualification of gaskets [Paper]. Technical symposium of the fluid sealing association, Houston, Texas. Unavailable

Marchand, L., & Derenne, M. (1996, July). Long term performance of elastomeric sheet gasket materials subjected to temperature exposure [Paper]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Unavailable

Hsu, K. H., Payne, J. R., & Derenne, M. (1996, July). Recent developments in PVRC gasket testing [Paper]. American Society of Mechanical Engineers (ASME) pressure vessels and piping conference, Montréal, Québec. Unavailable

Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (1995, February). Elevated temperature characterization of flexible, graphite sheet gasket materials [Paper]. 1995 SAE International Congress and Exposition, Detroit, MI. Published in Sae-Papers, 13(2). External link

Batista, P. P., Marchand, L., & Derenne, M. (1995, July). Proposed model for predicting leakage through porous gaskets [Paper]. 1995 Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, HI, USA. Unavailable

Book Section

Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1998). PVRC/MTI technology for characterizatizing technology gasket used in bolted flanged connections. In Bickford, J. H. (ed.), Gaskets and gasketed joints (137-302). External link

Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1992). Development of Test Procedures For Fire Resistance Qualification of Gaskets. In Nau, B. S. (ed.), Fluid Sealing (193-207). External link

Marchand, L., Bazergui, A., & Derenne, M. (1992). Recent Developments In Elevated Temperature Gasket Evaluation. In Nau, B. S. (ed.), Fluid Sealing (209-223). External link

List generated on: Sat Jun 15 15:22:29 2024 EDT